Experimental Study on New Multi-Column Tension-Leg-Type Floating Wind Turbine

Deep-water regions often have winds favorable for offshore wind turbines, and floating turbines currently show the greatest potential to exploit such winds. This work established proper scaling laws for model tests, which were then implemented in the construction of a model wind turbine with optimally designed blades. The aerodynamic, hydrodynamic, and elastic characteristics of the proposed new multi-column tension-leg-type floating wind turbine (WindStar TLP system) were explored in the wave tank testing of a 1:50 scale model at the State Key Laboratory of Ocean Engineering at Shanghai Jiao Tong University. Tests were conducted under conditions of still water, white noise waves, irregular waves, and combined wind, wave, and current loads. The results established the natural periods of the motion, damping, motion response amplitude operators, and tendon tensions of the WindStar TLP system under different environmental conditions, and thus could serve as a reference for further research.     

新型半潜式海上风力机基础水动力特性研究

概念性地设计了一种新型半潜式海上风力机基础,确定了结构的型式和尺寸,对风浪联合作用下不同工况的风力机基础稳性进行了校核.考虑黏性阻尼和二阶波浪力的作用,计算分析了风力机基础的水动力系数、幅频运动以及动力响应特性.结果表明,经过改进的新型风力机基础具有良好的稳性和水动力性能,特别是在垂荡性能上有大幅的提升.波浪入射角度对垂荡的影响不大,但对其他自由度RAOs影响较大.垂荡、横摇和纵摇RAOs均存在一个主峰值和次峰值,但峰值周期均远离波能集中区.此外还发现,不同工况下风浪入射角对风机系统的动力响应和系泊力均有较大影响,相对于工作工况,极端工况下所受风荷载较小,但是系泊力更大.     

偏航工况下海上浮式风力机基础运动响应及锚泊载荷影响分析

海上浮式风力机受风、浪、流等外部载荷影响,运营期间经常处于偏航工况,给风力机基础运动响应和锚泊载荷带来重要影响.基于经典叶素动量理论及势流理论,建立海上浮式风力机水—气动力耦合分析模型,对在非定常风、不规则波浪联合作用下,风力机偏航时基础运动响应及锚泊载荷等进行分析.研究发现,额定风速工况下,风力机偏航对平台纵荡和纵摇运动影响较大,偏航30°时纵荡和纵摇平均值比偏航0°时分别下降20.68％和37.36％,垂荡运动响应受风力机偏航影响较小;锚泊载荷变化趋势与平台运动及锚链布置有关,平台纵荡对锚泊载荷影响较大,偏航30°时锚链#1有效张力平均值比偏航0°时下降12.98％.     

风浪流中涡激共振对Spar型浮式风机运动响应的影响

以Spar型浮式风机为研究对象,研究涡激力对于浮式风机系统运动的影响。对多体动力学软件FAST进行二次开发,加入涡激力的计算接口,实现了在平台涡激、波激、空气动力载荷及系泊联合作用下的Spar浮式风机系统的运动响应的计算。计算了在风、浪、流联合作用下,频率锁定现象发生时,Spar基础的运动响应,分析了风浪下Spar风机运动响应的涡激运动特性,并研究了不同的入流角度的影响。结果表明:考虑涡激力后,Spar基础的横荡运动明显增大;风浪流同向时,风浪的存在会抑制流载荷引起的横荡在涡泄频率的运动;在流与风浪垂直时,会激发Spar基础的更大的纵荡运动响应。     

畸形波作用下半潜浮式风机系泊失效停机响应分析

半潜浮式风机逐渐在深海风电开发中受到关注,建立风机、平台与系泊结构耦合数值计算模型,通过FAST与AQWA链接进行风机塔基荷载及平台运动响应相互耦合传递,基于随机波与极限波组合模型生成畸形波时程序列,进行半潜浮式风机系泊失效全过程时域模拟计算分析,得出系泊锚链张力、风机、塔筒和平台运动时程响应,探究系泊失效、风机停机和叶片变桨速率对浮式风机平台系泊结构动力响应的影响。结果表明：畸形波作用下浮式平台和系泊结构动力响应显著,系泊失效导致塔基剪力增加,平台纵荡和纵摇运动响应显著增大;风机停机会引起系泊锚链张力显著减小,转子推力、塔基剪力和叶尖挥舞位移响应逐渐衰减,平台纵荡、纵摇和横摇运动响应显著减小;随着叶片变桨速率增加,风机转子推力和塔基剪力波动幅值增大。     

垂荡板对浮式风机水动—气动耦合性能影响研究

随着风电产业向深远海发展,浮式风机已经成为海上风机未来的发展趋势.由于复杂的风浪联合环境载荷作用,浮式风机作业时通常会产生大幅度的运动响应,这一方面会使得浮式风机系统受到的水动力载荷更加复杂,另一方面会影响浮式风机的输出功率.因此,如何有效地抑制浮式风机系统的运动响应就成为了设计的关键.基于非稳态致动线模型和两相流求解器naoeFOAM-SJTU,进行了带垂荡板的浮式风机耦合性能研究.首先在OC3-Hywind Spar平台上附加垂荡板,并结合NREL-5 MW风力机建立带垂荡板的浮式风机模型.其次对比不同形状的垂荡板对Spar-5 MW型浮式风机气动—水动耦合结果,分析相同风浪联合作用条件下垂荡板形状对浮式风机耦合响应的影响.研究结果表明:垂荡板能够减小纵荡和垂荡等运动响应幅值,但是对纵摇运动响应影响较小;当垂荡板直径和吃水位置相同时,相同风浪条件下圆形垂荡板能使浮式风机的气动平均功率增大约0.844％,而正方形垂荡板却使平均功率减小1.492％,这说明圆形垂荡板对浮式风机系统的作用效果整体而言优于正方形.     

一种新型Semi-Spar式海上风机平台系泊系统优化分析

参考英国的Kincardine风机采用的新式的Semi-Spar概念,结合spar式基础和半潜式基础的特点,提出了一种新式海上浮式风机平台模型,并基于三维势流理论,利用AQWA软件进行水动力计算,验证新式平台可靠性。分析了在风、浪、流荷载联合作用下,锚链竖向夹角、系缆数量对风机浮式平台运动性能和系泊张力的影响,对系泊系统进行优化,并验证极端工况下的可靠性。结果证明风机平台水平运动和纵摇运动幅值较小,但垂荡幅值略大,而通过减小锚链竖向夹角可以控制平台运动响应幅值,增加系缆数量可以同时减小系泊张力大小。计算结果证明了新型Semi-Spar式海上风机平台可行性,为浮式风机平台及系泊系统的设计提供参考。     

新型浮式基础的海上风机系统动力响应研究

概念性地设计了一种新型半潜—Spar混合浮式基础,以5 MW水平轴风机为例,研究了该新型浮式基础支撑的浮式风力机系统的动力响应。基于三维势流理论和Morison公式,应用SESAM软件建立浮式基础模型,在频域内计算了该浮式基础的水动力参数和响应算子,分析了浮式基础的运动性能。考虑叶片气动载荷和浮式基础波浪载荷,应用FAST软件对风机—浮式基础系统进行时域计算,分析风力机系统的运动性能。结果显示,该浮式基础运动幅值较小,具有良好的运动性能。     

畸形波作用下张力腿浮式风力机动力响应特性

针对张力腿系泊浮式风力机的基础运动,忽略柔性构件的影响,建立气动—水动—系泊非线性耦合运动方程。在运动控制方程中包含张力腿系泊系统的非线性回复刚度,桨距角控制以及浮式基础运动对空气动力载荷的影响。在波浪载荷的计算中考虑二阶波浪载荷的作用。采用随机频率相位角调制法生成畸形波波面时历,计算在畸形波作用下张力腿型浮式风力机的动力响应特性。数值模拟结果表明,在畸形波作用下,浮式基础的运动及空气动力性能均受到了显著的影响。其中浮式基础的纵荡和纵摇运动分别受二阶差频与和频波浪力的影响,而垂荡运动的增加则主要是受下沉运动的影响。在畸形波经过的时刻,风力机的功率系数迅速下降,水平方向的风载荷波动先减小,随后其数值急剧下降,而垂直方向的风载荷波动增大。     

垂荡板对半潜式风机基础拖航过程中水动力性能及运动响应的影响分析

垂荡板对半潜式风机基础水动力性能有极大的影响,从而影响基础拖航安装过程的安全。为了研究垂荡板对半潜式基础拖航过程中运动响应的影响,建立了拖缆—WindFloat浮式风机半潜式基础拖航系统模型。首先,基于三维势流理论,采用AQWA开展了拖航系统的频域水动力分析,分析了垂荡板的尺寸及形状对基础水动力性能的影响规律;进一步采用时域方法对拖航系统的运动响应进行分析,探究了垂荡板的尺寸及形状在不同浪向下对基础运动响应的影响规律。结果表明：垂荡板能有效抑制基础的垂荡RAO,但垂荡板形状对基础的水动力性能无明显影响;具有圆形垂荡板的半潜式基础在拖航过程中的运动性能略优于六边形垂荡板,在原设计基础上继续增大垂荡板尺寸对基础运动响应的抑制效果呈现先增大后减小的趋势,说明半潜式风机基础存在一个最优的垂荡板尺寸。     

Effect of wave nonlinearity on fatigue damage and extreme responses of a semi-submersible floating wind turbine

Floating wind turbine has been the highlight in offshore wind industry lately. There has been great effort on developing highly sophisticated numerical model to better understand its hydrodynamic behaviour. A engineering-practical method to study the nonlinear wave effects on floating wind turbine has been recently developed. Based on the method established, the focus of this paper is to quantify the wave nonlinearity effect due to nonlinear wave kinematics by comparing the structural responses of floating wind turbine when exposed to irregular linear Airy wave and fully nonlinear wave. Critical responses and fatigue damage are studied in operational conditions and short-term extreme values are predicted in extreme conditions respectively. In the operational condition, wind effects are dominating the mean value and standard deviation of most responses except floater heave motion. The fatigue damage at the tower base is dominated by wind effects. The fatigue damage for the mooring line is more influenced by wind effects for conditions with small wave and wave effects for conditions with large wave. The wave nonlinearity effect becomes significant for surge and mooring line tension for large waves while floater heave, pitch motion, tower base bending moment and pontoon axial force are less sensitive to the nonlinear wave effect. In the extreme condition, linear wave theory underestimates wave elevation, floater surge motion and mooring line tension compared with fully nonlinear wave theory while quite close results are predicted for other responses.     

Dynamic Responses of A Semi-Type Offshore Floating Wind Turbine During Normal State and Emergency Shutdown

This paper addresses joint wind-wave induced dynamic responses of a semi-type offshore floating wind turbine (OFWT) under normal states and fault event conditions. The analysis in this paper is conducted in time domain, using an aero-hydro-servo-elastic simulation code-FAST. Owing to the unique viscous features of the reference system, the original viscous damping model implemented in FAST is replaced with a quadratic one to gain an accurate capture of viscous effects. Simulation cases involve free-decay motion in still water, steady motions in the presence of regular waves and wind as well as dynamic response in operational sea states with and without wind. Simulations also include the cases for transient responses induced by fast blade pitching after emergency shutdown. The features of platform motions, local structural loads and a typical mooring line tension force under a variety of excitations are obtained and investigated.     

浮式风机气动—水动—气弹性耦合响应数值模拟

随着海上风电产业的快速发展,大型浮式风机逐渐从概念设计走向工程应用,但仍面临较大的挑战。一方面,在风、浪等环境载荷的作用下,浮式风机的气动载荷和水动力响应之间存在明显的相互干扰作用;另一方面,风力机大型化使得叶片细、长、薄的特点愈发突出,叶片柔性变形十分显著,这会影响到浮式风机的耦合性能。基于两相流CFD求解器naoe-FOAM-SJTU,结合弹性致动线模型和等效梁理论,建立了浮式风机气动—水动—气弹性耦合响应计算模型,并对规则波和剪切风作用下Spar型浮式风机的气动—水动—气弹性耦合响应进行了数值模拟分析。结果表明,风力机气动载荷使得叶片挥舞变形十分显著,而叶片的扭转变形会明显降低风力机的气动载荷。此外,风力机气动载荷会增大浮式平台的纵荡位移和纵摇角,同时,浮式平台运动响应会导致风力机气动载荷产生大幅度周期性变化。进一步地,叶片结构变形响应会使得浮式风机尾流场的速度损失和湍动能有所降低。     

新型圆筒型FPSO垂荡抑制结构优化设计

针对传统圆筒型FPSO垂荡运动剧烈的特点,提出一种带有垂荡抑制结构的圆筒型FPSO。采用1∶77.8的缩尺比制作模型,进行垂荡纵摇衰减试验,得到带有不同垂荡抑制结构模型的固有周期和无因次阻尼系数,进而选取最优的垂荡抑制结构型式。之后计算并对比传统圆筒型FPSO和新型圆筒型FPSO垂荡纵摇运动的固有周期和幅频响应函数。在此基础上,结合我国南海海洋环境条件,设计新型圆筒型FPSO的系泊系统,计算分析自存工况下的耦合动力响应,并与传统圆筒型FPSO进行对比。结果表明,文中提出的垂荡抑制结构可以有效增大系统垂荡纵摇运动的固有周期,改善运动性能,提高系泊的安全性。     

Dynamic Response of Offshore Wind Turbine on 3×3 Barge Array Floating Platform under Extreme Sea Conditions

Offshore wind farm construction is nowadays state of the art in the wind power generation technology.However,deep water areas with huge amount of wind energy require innovative floating platforms to arrange and install wind turbines in order to harness wind energy and generate electricity.The conventional floating offshore wind turbine system is typically in the state of force imbalance due to the unique sway characteristics caused by the unfixed foundation and the high center of gravity of the platform.Therefore,a floating wind farm for 3×3 barge array platforms with shared mooring system is presented here to increase stability for floating platform.The NREL 5 MW wind turbine and ITI Energy barge reference model is taken as a basis for this work.Furthermore,the unsteady aerodynamic load solution model of the floating wind turbine is established considering the tip loss,hub loss and dynamic stall correction based on the blade element momentum(BEM)theory.The second development of AQWA is realized by FORTRAN programming language,and aerodynamic-hydrodynamic-Mooring coupled dynamics model is established to realize the algorithm solution of the model.Finally,the 6 degrees of freedom(DOF)dynamic response of single barge platform and barge array under extreme sea condition considering the coupling effect of wind and wave were observed and investigated in detail.The research results validate the feasibility of establishing barge array floating wind farm,and provide theoretical basis for further research on new floating wind farm.     

浅水中浮体在波浪作用下运动的三维时域计算模型

港口中系泊船在波浪作用下运动问题的本质是浅水波浪与浮体的相互作用。与深水情况不同,浅水问题应当考虑水底、水域边界的影响及浅水波浪自身的特性,单一模型很难实现该模拟过程。为此,建立了Boussinesq方程计算入射波和Laplace方程计算散射波的全时域组合计算模型。有限元法求解的Boussinesq方程能使入射波充分考虑到水底、水域边界的影响和浅水波浪的特性;散射波被线性化,采用边界元法求解,并以浮体运动时的物面条件为入射波和散射波求解的匹配条件。该方法为完全的时域方法,计算网格不随时间变动,计算过程较为方便。通过与实验及其他数值方法的结果进行比较,验证了本模型对非线性波面、浮体的运动都有比较理想的计算结果,显示了本模型对非线性问题具有较好的计算能力。     

超大型和大型半潜浮式海上风力机动力响应对比

以超大型风力机(DTU 10 MW)为研究对象,对现有的大型(NREL 5 MW)无撑杆半潜浮式风力机支撑平台进行放大设计,用于支撑超大型风力机,基于气动-水动-伺服-弹性全耦合计算模型,根据设定的典型工况,使用FAST软件对超大型和大型无撑杆的半潜浮式风力机系统进行时域耦合分析,并依据计算结果对超大型和大型浮式风力机系统的运动响应和结构动力反应等特性进行对比分析。研究发现:半潜浮式风力机大型化后,气动荷载效应对风力机系统的激励作用更为突出,使得浮式平台运动由风荷载激励的低频共振反应比例增大,波频运动比例减小,这也导致由浮式平台低频运动激励的锚链张力反应增大。此外,高倍的飞轮转动频率对大型半潜浮式风力机叶片、塔架结构的激励作用较超大型半潜浮式风力机更为显著。     

Mooring tension and motion characteristics of a submerged fish reef with net in waves and currents using numerical analysis

A numerical model was used to analyze the motion response and mooring tension of a submerged fish reef system. The system included a net attached to a rigid structure suspended up from the bottom with a single, high tension mooring by fixed flotation. The analysis was performed by using a Morison equation type finite element model configured with truss elements. Input forcing parameters into the model consisted of both regular and irregular waves, with and without a steady current. Heave, surge and pitch dynamic calculations of the reef structure were made. Tension response results of the attached mooring line were also computed. Results were analyzed in both the time and frequency domain in which appropriate, linear transfer functions were calculated. The influence of the current was more evident in the tension and heave motion response data. This is most likely the result of the large buoyancy characteristics of the reef structure and the length of the mooring cable. Maximum mooring component tension was found to be 13.9 kN and occurred when the reef was subjected to irregular waves with a co-linear current of 1.0 m/s velocity. The results also showed that the system had little damping (in heave) with damped natural periods of 2.8 s. This combination of system characteristics promotes a possible resonating situation in typical open sea conditions with similar wave periods.     

The effects of yawing motion with different frequencies on the hydrodynamic performance of floating vertical-axis tidal current turbines

Under real sea conditions, the hydrodynamic performance of floating vertical-axis tidal current turbines is affected by waves and currents. The wave circular frequency is a significant factor in determining the frequencies of the wave-induced motion responses of turbines. In this study, the ANSYS-CFX software (manufacturer: ANSYS Inc., Pittsburgh, Pennsylvania, United States) is used to analyse the hydrodynamic performance of a vertical-axis turbine for different yawing frequencies and to study how the yawing frequencies affect the main hydrodynamic coefficients of the turbine, including the power coefficient, thrust coefficient, lateral force coefficient, and yawing moment coefficient. The time-varying curves obtained from the CFX software are fitted using the least-squares method; the damping and added mass coefficients are then calculated to analyse the influence of different yawing frequencies. The simulation results demonstrate that when analysing non-yawing turbines rotating under constant inflow, the main hydrodynamic coefficient time-varying curves of yawing turbines exhibit an additional fluctuation. Furthermore, the amplitude is positively correlated with the yawing frequency, and the oscillation amplitudes also increase with increasing yawing frequency; however, the average values of the hydrodynamic coefficients (except the power coefficient) are only weakly influenced by yawing motion. The power coefficient under yawing motion is lower than that under non-yawing motion, which means that yawing motion will cause the annual energy production of a turbine to decrease. The fitting results show that the damping term and the added mass term exert effects of the same level on the loads and moments of vertical-axis turbines under yawing motion. The results of this study can facilitate the study of the motion response of floating vertical-axis tidal current turbine systems in waves.     

Effect of mooring-line stiffness on the performance of a dual coaxial-cylinder Wave-Energy Converter

A point-absorber-type Wave-Energy Converter (WEC) consisting of a floating vertical inner cylinder and an annular outer cylinder that slides along the inner one is considered. The two cylinders heave differently under wave excitation, and wave energy can be harnessed from the relative heave motion between the two cylinders using a Permanent Magnet Linear Generator (PMLG) as the Power Take-Off unit. A mooring cable is attached to the bottom of the inner cylinder. This paper aims to examine the effect of the stiffness of the mooring cable on the performance of the coaxial-cylinder WEC system. The two limiting cases of no mooring cable (freely floating inner and outer cylinders) and an infinitely stiff mooring cable (fixed inner cylinder) were also considered. To perform the analysis, hydrodynamic and interference coefficients of the two heaving cylinders were computed semi-analytically using the method of matched eigenfunction expansions. Experimentally determined viscous corrections on damping were also included in the model in order to have more realistic predictions. The performance of the system in terms of motion responses and capture width were predicted and discussed for both regular and irregular waves. The results of the analysis indicate that both the freely floating design and the design with rigidly moored inner cylinder are viable. The two limiting cases show similar optimal performances, albeit with very different optimal generator damping. However, an ill-chosen mooring-cable stiffness may cause the inner and the outer cylinders to have the same resonance frequency, eliminating the relative heave motion and leading to almost no energy extraction. This situation needs to be avoided when designing the mooring system for a coaxial-cylinder WEC.