Slip sense inversion on active strike-slip faults in southwest Japan and its implications for Cenozoic tectonic evolution

Analyses of deflected river channels, offset of basement rocks, and fault rock structures reveal that slip sense inversion occurred on major active strike-slip faults in southwest Japan such as the Yamasaki and Mitoke fault zones and the Median Tectonic Line (MTL). Along the Yamasaki and Mitoke fault zones, small-size rivers cutting shallowly mountain slopes and Quaternary terraces have been deflected sinistrally, whereas large-size rivers which deeply incised into the Mio-Pliocene elevated peneplains show no systematically sinistral offset or complicated hairpin-shaped deflection. When the sinistral offsets accumulated on the small-size rivers are restored, the large-size rivers show residual dextral deflections. This dextral offset sense is consistent with that recorded in the pre-Cenozoic basement rocks. S–C fabrics of fault gouge and breccia zone developed in the active fault zones show sinistral shear sense compatible with earthquake focal mechanisms, whereas those of the foliated cataclasite indicate a dextral shear sense. These observations show that the sinistral strike-slip shear fabrics were overprinted on dextral ones which formed during a previous deformation phase. Similar topographic and geologic features are observed along the MTL in the central-eastern part of the Kii Peninsula. Based on these geomorphological and geological data, we infer that the slip sense inversion occurred in the period between the late Tertiary and mid-Quaternary period. This strike-slip inversion might result from the plate rearrangement consequent to the mid-Miocene Japan Sea opening event. This multidisciplinary study gives insight into how active strike-slip fault might evolves with time.     

Late Quaternary faulting along the western margin of the Poronaysk Lowland in central Sakhalin, Russia

Sakhalin Island straddles an active plate boundary between the Okhotsk and Eurasian plates. South of Sakhalin, this plate boundary is illuminated by a series of M_w 7–8 earthquakes along the eastern margin of the Sea of Japan. Although this plate boundary is considered to extend onshore along the length of Sakhalin, the location and convergence rate of the plate boundary had been poorly constrained. We mapped north-trending active faults along the western margin of the Poronaysk Lowland in central Sakhalin based on aerial photograph interpretation and field observations. The active faults are located east of and parallel to the Tym–Poronaysk fault, a terrane boundary between Upper Cretaceous and Neogene strata; the active faults appear to have reactivated the terrane boundary at depth in Quaternary time. The total length of the active fault zone on land is about 140 km. Tectonic geomorphic features such as east-facing monoclinal and fault scarps, back-tilted fluvial terraces, and numerous secondary faults suggest that the faults are west-dipping reverse faults. Assuming the most widely developed geomorphic surface in the study area formed during the last glacial maximum at about 20 ka based on similarities of geomorphic features with those in Hokkaido Island, we obtain a vertical component of slip rate of 0.9–1.4 mm/year. Using the fault dip of 30–60°W observed at an outcrop and trench walls, a net slip rate of 1.0–2.8 mm/year is obtained. The upper bound of the estimate is close to a convergence rate across the Tym–Poronaysk fault based on GPS measurements. A trenching study across the fault zone dated the most recent faulting event at 3500–4000 years ago. The net slip associated with this event is estimated at about 4.5 m. Since the last faulting event, a minimum of 3.5 m of strain, close to the strain released during the last event, has accumulated along the central portion of the active strand of the Tym–Poronaysk fault.     

Late Quaternary activity and dextral strike-slip movement on the Karakax Fault Zone, northwest Tibet

Field observations and interpretations of satellite images reveal that the westernmost segment of the Altyn Tagh Fault (called Karakax Fault Zone) striking WNW located in the northwestern margin of the Tibetan Plateau has distinctive geomorphic and tectonic features indicative of right-lateral strike-slip fault in the Late Quaternary. South-flowing gullies and N–S-trending ridges are systematically deflected and offset by up to ~ 1250 m, and Late Pleistocene–Holocene alluvial fans and small gullies that incise south-sloping fans record dextral offset up to ~ 150 m along the fault zone. Fault scarps developed on alluvial fans vary in height from 1 to 24 m. Riedel composite fabrics of foliated cataclastic rocks including cataclasite and fault gouge developed in the shear zone indicate a principal right-lateral shear sense with a thrust component. Based on offset Late Quaternary alluvial fans, ¹⁴C ages and composite fabrics of cataclastic fault rocks, it is inferred that the average right-lateral strike-slip rate along the Karakax Fault Zone is ~ 9 mm/a in the Late Quaternary, with a vertical component of ~ 2 mm/a, and that a M 7.5 morphogenic earthquake occurred along this fault in 1902. We suggest that right-lateral slip in the Late Quaternary along the WNW-trending Karakax Fault Zone is caused by escape tectonics that accommodate north–south shortening of the western Tibetan Plateau due to ongoing northward penetration of the Indian plate into the Eurasian plate.     

A new concept on tectonic correlation between Korea, China and Japan: Histories from the late Proterozoic to Cretaceous

The Dabie–Sulu collision belt in China extends to the Hongseong–Odesan belt in Korea while the Okcheon metamorphic belt in Korea is considered as an extension of the Nanhua rift within the South China block. The Hongseong–Odesan belt divides Korea's Gyeonggi massif into northern and southern portions. The southern Gyeonggi massif and the Yeongnam massif are correlated with China's Yangtze and Cathaysia blocks, respectively, while the northern Gyeonggi massif is part of the southern margin of the North China block. The southern and northern Gyeonggi massifs rifted from the Rodinia supercontinent during the Neoproterozoic, to form the borders of the South China and North China blocks, respectively. Subduction commenced along the southern and eastern borders of the North China block in the Ordovician and continued until a Triassic collision between the North China and South China blocks. While subduction was occurring on the margin of the North China block, high-P/T metamorphic belts and accretionary complexes developed along the inner zone of southwest Japan from the Ordovician to the Permian. During the subduction, the Hida belt in Japan grew as a continental margin or continental arc. Collision between the North and South China blocks began in Korea during the Permian (290–260 Ma), and propagated westwards until the Late Triassic (230–210 Ma) creating the sinistral TanLu fault in China and the dextral fault in the Hida and Hida marginal belt in Japan. Phanerozoic subduction and collision along the southern and western borders of the North China block led to formation of the Qinling–Dabie–Sulu–Hongseong–Hida–Yanji belt.     

郯庐断裂带中段第四纪活动及其分段特征

郯庐断裂带是中国东部一条岩石圈尺度的构造不连续带。位于江苏和山东培内的郯庐断裂带中段，在新构造运动时期强烈右旋走滑复活，形成地貌形迹显著的走滑活动断裂带。笔者在断层活动形迹的野外调查和观测的基础上，结合TM遥感影像特征解译和地震震源机制解资料，分析了郯庐断裂中段第四纪活动的分段行为特征。位于嘉山－潍坊之间的郯庐断裂带中段可以进一步划分为3段，北段安丘－茅埠亚段，中段汪湖－宿迁亚段，南段宿迁－嘉山亚段，这三段可能分别是独立的地震破裂段。观测表明，新构造变形主要集中在宿迁以北的中、北段，是历史强震的发生段，而南段变形相对较弱，嘉山以南安徽境内郯庐断裂新构造变形更弱。郯庐断裂带新构造走滑变形的走向分段行为是华北地区不同块体新构造运动位移调节的结果。     

青藏高原东南部第四纪右旋剪切运动

通过对藏东南嘉黎断裂和滇西北断裂实地考察研究，表明青藏高原南部不存在统一的边界走滑断裂。嘉黎断裂的西段位于青藏高原南部，是一个南北挤压作用下的东西向伸展构造区，发育近南北向的地堑系，嘉黎断裂西段是这些地堑之间的转换断层，具有较高的右旋走滑速率。滇西北断裂与红河断裂构成川滇菱形块体的西南边界，该块体具有向东南逃逸和顺时针旋转运动。     

青藏高原中部第四纪左旋剪切变形的地表地质证据

在青藏铁路的格尔木—拉萨段进行的活动断裂调查发现,在沱沱河—五道梁之间宽约150km的地段内发育了多条由北西西向次级断层左列分布构成的北西西向和北西向左旋张扭性断裂带,在断裂带之间则发育"S"型的北东向裂陷盆地和雁列分布的菱形裂陷盆地,盆地边界断裂也为左旋张扭性质。上述断裂带和裂陷带主要形成于第四纪,它们构成了宽约150km的不均匀的左旋简单剪切变形域,该变形域的整体活动性较弱,属于弱的不均匀剪切变形域。但其中的二道沟断陷盆地是个例外,该盆地边界断裂的垂直活动速率约为0 5mm/a,左旋活动速率介于0 8～1 0mm/a之间。而在整个左旋剪切变形带累计的左旋走滑速率不会超过6mm/a,它们所调节的昆仑山与唐古拉山之间的地壳南北缩短量也可能仅占总缩短量的15%～30%。上述弱剪切变形域与强烈左旋走滑的昆仑断裂系共同构成了高原中部的左旋剪切变形带,它们在印度板块与欧亚板块强烈碰撞的构造动力学背景下,起着调节青藏高原南北向缩短的重要作用。     

Active transfer fault zone linking a segmented extensional system (Betics, southern Spain): Insight into heterogeneous extension driven by edge delamination

Pliocene and Quaternary tectonic structures mainly consisting of segmented northwest–southeast normal faults, and associated seismicity in the central Betics do not agree with the transpressive tectonic nature of the Africa–Eurasia plate boundary in the Ibero-Maghrebian region. Active extensional deformation here is heterogeneous, individual segmented normal faults being linked by relay ramps and transfer faults, including oblique-slip and both dextral and sinistral strike-slip faults. Normal faults extend the hanging wall of an extensional detachment that is the active segment of a complex system of successive WSW-directed extensional detachments which have thinned the Betic upper crust since middle Miocene. Two areas, which are connected by an active 40-km long dextral strike-slip transfer fault zone, concentrate present-day extension. Both the seismicity distribution and focal mechanisms agree with the position and regime of the observed faults. The activity of the transfer zone during middle Miocene to present implies a mode of extension which must have remained substantially the same over the entire period. Thus, the mechanisms driving extension should still be operating. Both the westward migration of the extensional loci and the high asymmetry of the extensional systems can be related to edge delamination below the south Iberian margin coupled with roll-back under the Alborán Sea; involving the asymmetric westward inflow of asthenospheric material under the margins.     

Quaternary faulting along the Caribbean-North American plate boundary in Central America

Recent detailed mapping along the Motagua fault zone and reconnaissance along the Chixoy—Polochic and Jocotán—Chamelecón fault zones provide new information regarding the nature of Quaternary deformation along the Caribbean—North American plate boundary in Central America.The southern boundary of the Motagua fault zone is defined by a major active left-slip fault that ruptured during the February 4, 1976 Guatemala earthquake. The recurrent nature of slip along the fault is dramatically demonstrated where stream terraces of the Río El Tambor show progressive left-slip and vertical (up-to-the-north) slip. Left-slip increases from 23.7 m (youngest mappable terrace) to 58.3 m (oldest mappable terrace) and vertical slip increases from 0.6 m to 2.5 m. The oldest mappable terrace crossed by the fault appears to be younger than 40,000 years and older than 10,000 years.Reconnaissance along the Chixoy—Polochic fault zone between Chiantla and Lago de Izabal has located the traces of a previously unmapped major active left-slip fault. Geomorphic features along this fault are similar to those observed along the active trace of the Motagua fault zone. Consistent and significant features suggestive of left-slip have so far not been observed along the Guatemala section of the Jocotán—Chamelecón fault zone.In Central America, the active Caribbean—North American plate boundary is comprised of the Motagua, Chixoy—Polochic, and probably the Jocotán—Chamelecón fault zones, with each accommodating part of the slip produced at the mid-Cayman spreading center. Similarities in geomorphic expression, apparent amount of left-slip, and frequency and magnitude of historical and instrumentally recorded earthquakes between the active traces of the Motagua and Chixoy—Polochic fault zones suggest a comparable degree of activity during Quaternary time; the sense and amount of Quaternary slip on the Jocotán—Chamelecón fault zone remain uncertain, although it appears to be an active earthquake source. Uplift of major mountain ranges on the north side of each fault zone reflects the small but consistent up-to-the-north vertical component (up to 5% of the lateral component) of slip along the plate boundary. Preliminary findings, based on offset stream terraces, indicate a late Quaternary slip rate along the Caribbean—North American plate boundary of between 0.45 and 1.8 cm/yr. Age dating of offset Quaternary terraces in Guatemala will allow refinement of this rate.     

Rate of strike-slip motion on the Amanos Fault (Karasu Valley, southern Turkey) constrained by K–Ar dating and geochemical analysis of Quaternary basalts

The left-lateral Amanos Fault follows a 200-km-long and up to 2-km-high escarpment that bounds the eastern margin of the Amanos mountain range and the western margin of the Karasu Valley in southern Turkey, just east of the northeastern corner of the Mediterranean Sea. Regional kinematic models have reached diverse conclusions as to the role of this fault in accommodating relative motion between either the African and Arabian, Turkish and African, or Turkish and Arabian plates. Local studies have tried to estimate its slip rate by K–Ar dating Quaternary basalts that erupted within the Amanos Mountains, flowed across it into the Karasu Valley, and have since become offset. However, these studies have yielded a wide range of results, ranging from 0.3 to 15 mm a⁻¹, which do not allow the overall role and significance of this fault in accommodating crustal deformation to be determined. We have used the Cassignol K–Ar method to date nine Quaternary basalt samples from the vicinity of the southern part of the Amanos Fault. These basalts exhibit a diverse chemistry, which we interpret as a consequence varying degrees of partial melting of their source combined with variable crustal contamination. This dating allows us to constrain the Quaternary slip rate on the Amanos fault to 1.0 to 1.6 mm a⁻¹. The dramatic discrepancies between past estimates of this slip rate are partly due to technical difficulties in K–Ar dating of young basalts by isotope dilution. In addition, previous studies at the key locality of Hacılar have unwittingly dated different, chemically distinct, flow units of different ages that are juxtaposed. This low slip rate indicates that, at present, the Amanos Fault takes up a small proportion of the relative motion between the African and Arabian plates, which is transferred southward to the Dead Sea Fault Zone. It also provides strong evidence against the long-standing view that its slip continues offshore to the southwest along a hypothetical left-lateral fault zone located south of Cyprus.     

Variation of palaeostress patterns along the Oriente transform wrench corridor, Cuba: significance for Neogene–Quaternary tectonics of the Caribbean realm

In this study, we address the late Miocene to Recent tectonic evolution of the North Caribbean (Oriente) Transform Wrench Corridor in the southern Sierra Maestra mountain range, SE Cuba. The region has been affected by historical earthquakes and shows many features of brittle deformation in late Miocene to Pleistocene reef and other shallow water deposits as well as in pre-Neogene, late Cretaceous to Eocene basement rocks. These late Miocene to Quaternary rocks are faulted, fractured, and contain calcite- and karst-filled extension gashes. Type and orientation of the principal normal palaeostress vary along strike in accordance with observations of large-scale submarine structures at the south-eastern Cuban margin. Initial N–S extension is correlated with a transtensional regime associated with the fault, later reactivated by sinistral and/or dextral shear, mainly along E–W-oriented strike-slip faults. Sinistral shear predominated and recorded similar kinematics as historical earthquakes in the Santiago region. We correlate palaeostress changes with the kinematic evolution along the boundary between the North American and Caribbean plates. Three different tectonic regimes were distinguished for the Oriente transform wrench corridor (OTWC): compression from late Eocene–Oligocene, transtension from late Oligocene to Miocene (?) (D₁), and transpression from Pliocene to Present (D₂–D₄), when this fault became a transform system. Furthermore, present-day structures vary along strike of the Oriente transform wrench corridor (OTWC) on the south-eastern Cuban coast, with dominantly transpressional/compressional and strike-slip structures in the east and transtension in the west. The focal mechanisms of historical earthquakes are in agreement with the dominant ENE–WSW transpressional structures found on land.     

Active strike–slip faulting and macroscopically nonrigid deformation of volcanic rocks in central Japan inferred from a paleomagnetic study

Detailed paleomagnetic investigation of a pyroclastic flow deposit has clarified the deformation mode around an active fault. In central Japan, the early Quaternary Nyukawa Pyroclastic Flow Deposit is cut by the active dextral Enako fault. Activity level of the fault is evaluated on the basis of geological and geomorphological surveys. Then, paleomagnetic samples are collected from 22 sites at exposures located on a lineament that is adjoining and parallel to the Enako fault. Stable thermoremanent magnetization (TRM) of the pyroclastic deposit is isolated through progressive thermal and/or alternating field demagnetization tests. Untilted site-mean directions of the TRMs simultaneously acquired during initial cooling indicate significant clockwise vertical-axis rotation. The lineament was then activated with right-lateral motions through the early Quaternary. Together with the late Quaternary activities along the adjoining Enako fault evaluated by our study, the present result exemplifies a migration of active segments within a fault system during the Quaternary. Paleomagnetic directions on the strike–slip fault are not concordant with uniform deformation predicted by the model of rotation of rigid blocks aligned on a master fault, but suggestive of a periodic deformation as a result of intense fracturing and differential rotation of blocks bounded by nested parallel faults.     

Seismic evidence of divergent rifting and subsequent deformation in the southern Japan Sea, and a Cenozoic tectonic synthesis of the eastern Eurasian margin

Neogene rift system configuration for the back-arc of southwest Japan, southern rim of the Japan Sea, is argued on the basis of reflection seismic interpretation. Divergent rifting and subsequent contraction provoked by an arc–arc collisional event are manifested by the formation of faulted grabens and their inverted deformation, respectively. We identified the following four Cenozoic tectonic epochs as a decomposition process of the eastern Eurasian margin based on reliable paleomagnetic data: (1) Plate margin rearrangement on a regional left-lateral fault through southwest Japan and Sikhote Alin, which constituted a continuous geologic province before the early Tertiary differential motion; (2) Early Tertiary clockwise rotation (>20°) of the east Tan-Lu block relative to the North China block; (3) Oligocene to early Miocene divergent rifting and spreading of the Japan Sea, which divided southwest Japan from the east Tan-Lu block; (4) Middle Miocene bending and back-arc inversion of southwest Japan caused by collision with the Izu-Bonin arc. According to the estimation of relative motions during these events, a paleogeographic reconstruction is presented through Cenozoic time.     

The Denali fault system and the tectonic development of Southern Alaska

The Denali fault system forms an arc, convex to the north, across southern Alaska. In the central Alaska Range, the system consists of a northern Hines Creek strand and a southern McKinley strand, up to 30 km apart. The Hines Creek fault may preserve a record of the early history of the fault system. Strong contrasts between juxtaposed lower Paleozoic rocks appear to require large dextral strike-slip or a combination of dipslip and strike-slip displacements along this fault. Thus the fault system may mark a reactivated suture zone between continental rocks to the north and a late Paleozoic island arc to the south, as suggested by Richter and Jones (1973). Major movements on the Hines Creek fault ceased by the Late Cretaceous, but local dip-slip movements continued into the Cenozoic.The McKinley fault is an active dextral strike-slip fault with a mean Holocene displacement rate of 1–2 cm/y. Post-Late Cretaceous dextral offset on this fault is probably at least 30 km and possibly as great as 400 km. Patterns of early Tertiary folding and reverse faulting indicate that the McKinley fault was active at that time and suggest that this fault developed shortly after strike-slip activity ceased on the Hines Creek fault. Oligocene — middle Miocene tectonic stability and late Miocene—Pliocene uplift of crustal blocks may reflect periods of quiescence and activity, on the McKinley fault.The two strands of the Denali fault divide the central Alaska Range into northern, central, and southern terranes. During the Paleozoic—Mesozoic there is evidence for at least two episodes of compressive deformation in the northern terrane, four in the central terrane, and two in the southern. During each, the axis of maximum compressive strain was subhorizontal and about north—south. This pattern suggests a Paleozoic and Mesozoic setting dominated by plate convergence, despite the possible large pre-Late Cretaceous lateral movement on the Hines Creek fault.The Cenozoic pattern of faulting and folding appears compatible with a plate tectonic model of (1) rapid northward movement of the Pacific plate relative to Alaska during the early Tertiary; (2) slow northwestward movement of the Pacific plate during the Oligicene and (3) rapid northwestward movement of the Pacific plate from the end of the Oligocene to the present.     

Tectonic evolution of the Qumran Basin from high-resolution 3.5-kHz seismic profiles and its implication for the evolution of the northern Dead Sea Basin

The Dead Sea Basin is a morphotectonic depression along the Dead Sea Transform. Its structure can be described as a deep rhomb-graben (pull-apart) flanked by two block-faulted marginal zones. We have studied the recent tectonic structure of the northwestern margin of the Dead Sea Basin in the area where the northern strike-slip master fault enters the basin and approaches the western marginal zone (Western Boundary Fault). For this purpose, we have analyzed 3.5-kHz seismic reflection profiles obtained from the northwestern corner of the Dead Sea. The seismic profiles give insight into the recent tectonic deformation of the northwestern margin of the Dead Sea Basin. A series of 11 seismic profiles are presented and described. Although several deformation features can be explained in terms of gravity tectonics, it is suggested that the occurrence of strike-slip in this part of the Dead Sea Basin is most likely. Seismic sections reveal a narrow zone of intensely deformed strata. This zone gradually merges into a zone marked by a newly discovered tectonic depression, the Qumran Basin. It is speculated that both structural zones originate from strike-slip along right-bending faults that splay-off from the Jordan Fault, the strike-slip master fault that delimits the active Dead Sea rhomb-graben on the west. Fault interaction between the strike-slip master fault and the normal faults bounding the transform valley seems the most plausible explanation for the origin of the right-bending splays. We suggest that the observed southward widening of the Dead Sea Basin possibly results from the successive formation of secondary right-bending splays to the north, as the active depocenter of the Dead Sea Basin migrates northward with time.     

Structural relationship between the Sea of Marmara Basin and the North Anatolian Fault Zone

The North Anatolian Fault (NAF) zone is 1500 km long, extending almost up to the Greek mainland in the west. It is a seismically active right-lateral strike-slip fault that accommodates the relative motion between the Turkish block and Black Sea plate. The Sea of Marmara lies along the western part of the NAF and shows evidence of subsidence. In this area pure strike-slip motion of the fault zone changes into extensional strike-slip movement that is responsible for the creation of the Sea of Marmara and the North Aegean basins. The northern half of the Sea of Marmara is interpreted as a large pull-apart basin. This basin is subdivided into three smaller basins separated by strike-slip fault segments of uplifted blocks NE-SW. Basinal areas are covered by horizontally layered sedimentary sequences. Uplifted blocks have undergone compressional stress. All the blocks are subsiding and are undergoing vertical motions and rotations relative to one another. The uplifted blocks exhibit positive Bouguer gravity anomalies. According to gravity interpretation, there is relative crustal thinning under the Sea of Marmara. The northern side of the Sea of Marmara is marked by a distinctive deep-rooted magnetic anomaly, which is dissected and shifted southward by strike-slip faulting. The southern shelf areas of the Sea of Marmara are dominated by short-wavelength magnetic anomalies of shallow origin.     

Neotectonic and volcanic characteristics of the Karasu fault zone (Anatolia,Turkey): The transition zone between the Dead Sea transform and the East Anatolian fault zone

Abstract

The Karasu Rift (Antakya province, SE Turkey) has developed between east-dipping, NNE-striking faults of the Karasu fault zone, which define the western margin of the rift and westdipping, N-S to N20°-30°E-striking faults of Dead Sea Transform fault zone (DST) in the central part and eastern margin of the rift. The strand of the Karasu fault zone that bounds the basin from west forms a linkage zone between the DST and the East Anatolian fault zone (EAFZ). The greater vertical offset on the western margin faults relative to the eastern ones indicates asymmetrical evolution of the rift as implied by the higher escarpments and accumulation of extensive, thick alluvial fans on the western margins of the rift. The thickness of the Quaternary sedimentary fill is more than 465 m, with clastic sediments intercalated with basaltic lavas. The Quaternary alkali basaltic volcanism accompanied fluvial to lacustrine sedimentation between 1.57 ± 0.08 and 0.05 ± 0.03 Ma. The faults are left-lateral oblique-slip faults as indicated by left-stepping faulting patterns, slip-lineation data and left-laterally offset lava flows and stream channels along the Karasu fault zone. At Hacilar village, an offset lava flow, dated to 0.08 ± 0.06 Ma, indicates a rate of leftlateral oblique slip of approximately 4.1 mm?year^?1. Overall, the Karasu Rift is an asymmetrical transtensional basin, which has developed between seismically active splays of the left-lateral DST and the left-lateral oblique-slip Karasu fault zone during the neotectonic period. © 2001 Éditions scientifiques et médicales Elsevier SAS     

Formation and shortening deformation of a back-arc rift basin revealed by deep seismic profiling, central Japan

The northern Fossa Magna (NFM) basin is a Miocene rift system produced in the final stages of the opening of the Sea of Japan. It divides the major structure of Japan into two regions, with north-trending geological structures to the NE of the basin and EW trending structures to the west of the basin. The Itoigawa-Shizuoka Tectonic Line (ISTL) bounds the western part of the northern Fossa Magna and forms an active fault system that displays one of the largest slip rates (4–9 mm/year) in the Japanese islands. Deep seismic reflection and refraction/wide-angle reflection profiling were undertaken in 2002 across the northern part of ISTL in order to delineate structures in the crust, and the deep geometry of the active fault systems. The seismic images are interpreted based on the pattern of reflectors, the surface geology and velocities derived from refraction analysis. The 68-km-long seismic section suggests that the Miocene NFM basin was formed by an east dipping normal fault with a shallow flat segment to 6 km depth and a deeper ramp penetrating to 15 km depth. This low-angle normal fault originated as a comparatively shallow brittle/ductile detachment in a high thermal regime present in the Miocene. The NFM basin was filled by a thick (>6 km) accumulation of sediments. Shortening since the late Neogene is accommodated along NS to NE–SE trending thrust faults that previously accommodated extension and produce fault-related folds on their hanging wall. Based on our balanced geologic cross-section, the total amount of Miocene extension is ca. 42 km and the total amount of late Neogene to Quaternary shortening is ca. 23 km.     

Evolution of the eastern margin of Korea: Constraints on the opening of the East Sea (Japan Sea)

We interpreted marine seismic profiles in conjunction with swath bathymetric and magnetic data to investigate rifting to breakup processes at the eastern Korean margin that led to the separation of the southwestern Japan Arc. The eastern Korean margin is rimmed by fundamental elements of rift architecture comprising a seaward succession of a rift basin and an uplifted rift flank passing into the slope, typical of a passive continental margin. In the northern part, rifting occurred in the Korea Plateau that is a continental fragment extended and partially segmented from the Korean Peninsula. Two distinguished rift basins (Onnuri and Bandal Basins) in the Korea Plateau are bounded by major synthetic and smaller antithetic faults, creating wide and considerably symmetric profiles. The large-offset border fault zones of these basins have convex dip slopes and demonstrate a zig-zag arrangement along strike. In contrast, the southern margin is engraved along its length with a single narrow rift basin (Hupo Basin) that is an elongated asymmetric half-graben. Analysis of rift fault patterns suggests that rifting at the Korean margin was primarily controlled by normal faulting resulting from extension rather than strike-slip deformation. Two extension directions for rifting are recognized: the Onnuri and Hupo Basins were rifted in the east-west direction; the Bandal Basin in the east–west and northwest–southeast directions, suggesting two rift stages. We interpret that the east–west direction represents initial rifting at the inner margin; while the Japan Basin widened, rifting propagated southeastward repeatedly from the Japan Basin toward the Korean margin but could not penetrate the strong continental lithosphere of the Korean Shield and changed the direction to the south, resulting in east–west extension to create the rift basins at the Korean margin. The northwest–southeast direction probably represents the direction of rifting orthogonal to the inferred line of breakup along the base of the slope of the Korea Plateau; after breakup the southwestern Japan Arc separated in the southeast direction, indicating a response to tensional tectonics associated with the subduction of the Pacific Plate in the northwest direction. No significant volcanism was involved in initial rifting. In contrast, the inception of sea floor spreading documents a pronounced volcanic phase which appears to reflect asthenospheric upwelling as well as rift-induced convection particularly in the narrow southern margin. We suggest that structural and igneous evolution of the Korean margin, although it is in a back-arc setting, can be explained by the processes occurring at the passive continental margin with magmatism influenced by asthenospheric upwelling.     

New Ar–Ar age constraints on the deformation along the Machaoying fault zone: Implications for Early Cambrian tectonism in the North China Craton

The Machaoying fault zone extends along the southern margin of the North China Craton (NCC) and controlled the regional structures and hydrothermal mineral systems in this area. The fault underwent at least two major deformational phases, as revealed by macro- and micro-structural observations from a well-developed segment of the fault in the Hongzhuang–Baitu area, located south of the Xiong'er Mountains. Early ductile deformation is characterized by thrusting from north to south, which was subsequently overprinted by late brittle faulting. Syntectonic strain shadows of biotite are preserved around rotated porphyroclasts of quartz amygdales in mylonite. The biotite yields a ⁴⁰Ar–³⁹Ar plateau age of 524.9 ± 1.9 Ma, which is interpreted as the time of regional thrusting along the Machaoying fault zone. The thrusting may be temporally correlated with an Early Cambrian discontinuity in sedimentation observed in the rocks sequences of the NCC, suggesting a compressional regime in this area and a craton-wide tectonic event. Many 540–500 Ma tectonic events have been previously identified in the Qinling–Qilian–Kunlun Orogenic Belt of central China and in massifs in northeastern China, both of which surround the NCC, and some of these were interpreted to be associated with assembly of Gondwana. However, paleomagnetic data indicate that the NCC was unlikely to have been connected with Gondwana in the Early Cambrian and thus our new biotite date cannot record deformation along the Gondwanan margin. Dating of K-feldspar from a quartz–K-feldspar vein formed along one of the brittle faults of the Machaoying fault zone yields a much younger ⁴⁰Ar–³⁹Ar plateau age of 119.5 ± 0.7 Ma. This is a minimum age for the brittle deformation along the southern margin of the NCC, which also overlaps the age of widespread gold and molybdenum mineralization in the region.