Simulated water budget of a small forested watershed in the continental/maritime hydroclimatic region of the United States

Annual streamflows have decreased across mountain watersheds in the Pacific Northwest of the United States over the last ~70 years; however, in some watersheds, observed annual flows have increased. Physically based models are useful tools to reveal the combined effects of climate and vegetation on long‐term water balances by explicitly simulating the internal watershed hydrological fluxes that affect discharge. We used the physically based Simultaneous Heat and Water (SHAW) model to simulate the inter‐annual hydrological dynamics of a 4 km² watershed in northern Idaho. The model simulates seasonal and annual water balance components including evaporation, transpiration, storage changes, deep drainage, and trends in streamflow. Independent measurements were used to parameterize the model, including forest transpiration, stomatal feedback to vapour pressure, forest properties (height, leaf area index, and biomass), soil properties, soil moisture, snow depth, and snow water equivalent. No calibrations were applied to fit the simulated streamflow to observations. The model reasonably simulated the annual runoff variations during the evaluation period from water year 2004 to 2009, which verified the ability of SHAW to simulate the water budget in this small watershed. The simulations indicated that inter‐annual variations in streamflow were driven by variations in precipitation and soil water storage. One key parameterization issue was leaf area index, which strongly influenced interception across the catchment. This approach appears promising to help elucidate the mechanisms responsible for hydrological trends and variations resulting from climate and vegetation changes on small watersheds in the region. Copyright © 2015 John Wiley & Sons, Ltd.     

Diagnostic calibration and cross‐catchment transferability of a simple process‐consistent hydrologic model

The transferability of hydrologic models is of ever increasing importance for making improved hydrologic predictions and testing hypothesized hydrologic drivers. Here, we present an investigation into the variability and transferability of the recently introduced catchment connectivity model (Smith et al., 2013 ). The catchment connectivity model was developed following extensive experimental observations identifying the key drivers of streamflow in the Tenderfoot Creek Experimental Forest (Jencso et al., 2009 ; Jencso et al., 2010 ), with the goal of creating a simple model consistent with internal observations of catchment hydrologic connectivity patterns. The model was applied across seven catchments located within Tenderfoot Creek Experimental Forest to investigate spatial variability and transferability of model performance and parameterization. The results demonstrated that the model resulted in historically good fits (based on previous studies at the sites) to both the hydrograph and internal water table dynamics (corroborated with experimental observations). The impact of a priori parameter limits was also examined. It was observed that enforcing field‐based limits on model parameters resulted in slight reductions to streamflow hydrograph fits, but significant improvements to model process fidelity (as hydrologic connectivity), as well as moderate improvement in the transferability of model parameterizations from one catchment to the next. Copyright © 2016 John Wiley & Sons, Ltd.     

Modelling the impacts of land-cover change on streamflow dynamics of a tropical rainforest headwater catchment

Abstract

A modelling experiment is used to examine different land-use scenarios ranging from extreme deforestation (31% forest cover) to pristine (95% forest cover) conditions and related Payment for Ecosystem Services (PES) schemes to assess whether a change in streamflow dynamics, discharge extremes and mean annual water balance of a 73.4-km² tropical headwater catchment in Costa Rica could be detected. A semi-distributed, conceptual rainfall–runoff model was adapted to conceptualize the empirically-based, dominant hydrological processes of the study area and was multi-criteria calibrated using different objective functions and empirical constraints on model simulations in a Monte Carlo framework to account for parameter uncertainty. The results suggest that land-use change had relatively little effect on the overall mean annual water yield (<3%). However, streamflow dynamics proved to be sensitive in terms of frequency, timing and magnitude of discharge extremes. For low flows and peak discharges of return periods greater than one year, land use had a minor influence on the runoff response. Below these thresholds (<1-year return period), forest cover potentially decreased runoff peaks and low flows by as much as 10%, and non-forest cover increased runoff peaks and low flows by up to 15%. The study demonstrated the potential for using hydrological modelling to help identify the impact of protection and reforestation efforts on ecosystem services.

Editor Z.W. Kundzewicz

Citation Birkel, C., Soulsby, C., and Tetzlaff, D., 2012. Modelling the impacts of land-cover change on streamflow dynamics of a tropical rainforest headwater catchment. Hydrological Sciences Journal, 57 (8), 1543–1561.     

Streamflow predictability in the Saskatchewan/Nelson River basin given macroscale estimates of the initial soil moisture status

Abstract

Soil moisture estimates obtained over large spatial areas will become increasingly available through current and upcoming satellite missions and from numerous land surface parameterization schemes run at global- and continental-scale resolutions. The goal of this research was to evaluate the potential for using macroscale estimates of soil moisture for enhancing streamflow forecasts. Towards this research objective, monthly streamflow estimates were obtained from over 50 gauge locations within the Nelson basin, Canada, for the period 1979–1999. For each streamflow record, multiple linear regression models were used to remove components of the streamflow signal related to previous streamflow, climate teleconnections (e.g. ENSO and AO) and snow water equivalence. Correlations were then assessed between the macroscale soil moisture estimates and the residuals of the multiple linear regression analysis over lead times of one, two and three months. At the one- and two-month lead time, statistically significant relationships between soil moisture and the residuals of streamflow are observed over a large proportion of the gauging locations. The number of catchments with statistically significant relationships decreases significantly after two months and particularly in the months of April—June. This study demonstrates that available macroscale estimates of soil moisture have the potential to enhance streamflow prediction, although further study is suggested to improve upon the soil moisture estimates and their application in a forecast system.     

Distributed and integrated response of a geographic information system‐based hydrologic model in the eastern Palouse region,Idaho

Verification of distributed hydrologic models is rare owing to the lack of spatially detailed field measurements and a common mismatch between the scale at which soil hydraulic properties are measured and the scale of a single modelling unit. In this study, two of the most commonly calibrated parameters, i.e. soil depth and the vertical distribution of lateral saturated hydraulic conductivity K_s, were eliminated by a spatially detailed soil characterization and results of a hillslope‐scale field experiment. The soil moisture routing (SMR) model, a geographic information system‐based hydrologic model, was modified to represent the dominant hydrologic processes for the Palouse region of northern Idaho. Modifications included K_s as a double exponential function of depth in a single soil layer, a snow accumulation and melt algorithm, and a simple relationship between storage and perched water depth (PWD) using the drainable porosity. The model was applied to a 2 ha catchment without calibration to measured data. Distributed responses were compared with observed PWD over a 3‐year period on a 10 m × 15 m grid. Integrated responses were compared with observed surface runoff at the catchment outlet. The modified SMR model simulated the PWD fluctuations remarkably well, especially considering the shallow soils in this catchment: a 0·20 m error in PWD is equivalent to only a 1·6% error in predicted soil moisture content. Simulations also captured PWD fluctuations during a year with high spatial variability of snow accumulation and snowmelt rates at upslope, mid‐slope, and toe slope positions with errors as low as 0·09 m, 0·12 m, and 0·12 m respectively. Errors in distributed and integrated model simulations were attributed mostly to misrepresentation of rain events and snowmelt timing problems. In one location in the catchment, simulated PWD was consistently greater than observed PWD, indicating a localized recharge zone, which was not identified by the soil morphological survey. Copyright © 2006 John Wiley & Sons, Ltd.     

BIBLIOGRAPHY—BIBLIOGRAPHIE

Abstract

The Coupled Routing and Excess STorage model (CREST, jointly developed by the University of Oklahoma and NASA SERVIR) is a distributed hydrological model developed to simulate the spatial and temporal variation of land surface, and subsurface water fluxes and storages by cell-to-cell simulation. CREST's distinguishing characteristics include: (1) distributed rainfall–runoff generation and cell-to-cell routing; (2) coupled runoff generation and routing via three feedback mechanisms; and (3) representation of sub-grid cell variability of soil moisture storage capacity and sub-grid cell routing (via linear reservoirs). The coupling between the runoff generation and routing mechanisms allows detailed and realistic treatment of hydrological variables such as soil moisture. Furthermore, the representation of soil moisture variability and routing processes at the sub-grid scale enables the CREST model to be readily scalable to multi-scale modelling research. This paper presents the model development and demonstrates its applicability for a case study in the Nzoia basin located in Lake Victoria, Africa.

Citation Wang, J., Yang, H., Li, L., Gourley, J. J., Sadiq, I. K., Yilmaz, K. K., Adler, R. F., Policelli, F. S., Habib, S., Irwn, D., Limaye, A. S., Korme, T. &; Okello, L. (2011) The coupled routing and excess storage (CREST) distributed hydrological model. Hydrol. Sci. J. 56(1), 84–98.     

Alteration of hydrological processes and streamflow with juniper (Juniperus virginiana) encroachment in a mesic grassland catchment

To understand the effect of woody plant encroachment on hydrological processes of mesic grasslands, we quantified infiltration capacity in situ, the temporal changes in soil water storage, and streamflow of a grassland catchment and a catchment heavily encroached by juniper (Juniperus virginiana, eastern redcedar) in previously cultivated, non‐karst substrate grasslands in north‐central Oklahoma for 3 years. The initial and steady‐state infiltration rates under the juniper canopy were nearly triple to that of the grassland catchment and were intermediate in the intercanopy spaces within the encroached catchment. Soil water content and soil water storage on the encroached catchment were generally lower than on the grassland catchment, especially when preceding the seasons of peak rainfall in spring and fall. Frequency and magnitude of streamflow events were reduced in the encroached catchment. Annual runoff coefficients for the encroached catchment averaged 2.1%, in contrast to 10.6% for the grassland catchment. Annual streamflow duration ranged from 80 to 250 h for the encroached catchment compared with 600 to 800 h for the grassland catchment. Our results showed that the encroachment of juniper into previously cultivated mesic grasslands fundamentally alters catchment hydrological function. Rapid transformation of mesic grassland to a woodland state with juniper encroachment, if not confined, has the potential to drastically reduce soil water, streamflow and flow duration of ephemeral streams in the Southern Great Plains. Copyright © 2013 John Wiley & Sons, Ltd.     

Impact of grid resolution on the integrated and distributed response of a coupled surface–subsurface hydrological model for the des Anglais catchment,Quebec

Digital elevation models (DEMs) at different resolutions (180, 360, and 720 m) are used to examine the impact of different levels of landscape representation on the hydrological response of a 690‐km² catchment in southern Quebec. Frequency distributions of local slope, plan curvature, and drainage area are calculated for each grid size resolution. This landscape analysis reveals that DEM grid size significantly affects computed topographic attributes, which in turn explains some of the differences in the hydrological simulations. The simulations that are then carried out, using a coupled, process‐based model of surface and subsurface flow, examine the effects of grid size on both the integrated response of the catchment (discharge at the main outlet and at two internal points) and the distributed response (water table depth, surface saturation, and soil water storage). The results indicate that discharge volumes increase as the DEM is coarsened, and that coarser DEMs are also wetter overall in terms of water table depth and soil water storage. The reasons for these trends include an increase in the total drainage area of the catchment for larger DEM cell sizes, due to aggregation effects at the boundary cells of the catchment, and to a decrease in local slope and plan curvature variations, which in turn limits the capacity of the watershed to transmit water downslope and laterally. The results obtained also show that grid resolution effects are less pronounced during dry periods when soil moisture dynamics are mostly controlled by vertical fluxes of evaporation and percolation. Copyright © 2010 John Wiley & Sons, Ltd.     

A multi-objective calibration approach using in-situ soil moisture data for improved hydrological simulation of the Prairies

ABSTRACT

Traditionally, hydrological models are only calibrated to reproduce streamflow regime without considering other hydrological state variables, such as soil moisture and evapotranspiration. Limited studies have been performed on constraining the model parameters, despite the fact that the presence of a large number of parameters may provide large degree of freedom, resulting in equifinality and poor model performance. In this study, a multi-objective optimization approach is adopted, and both streamflow and soil moisture data are calibrated simultaneously for an experimental study basin in the Saskatchewan Prairies in western Canada. The results of this study show that the multi-objective calibration improves model fidelity compared to the single objective calibration. Moreover, the study demonstrates that single objective calibration performed against only streamflow can fairly mimic the streamflow hydrograph but does not yield realistic estimation of other fluxes such as evapotranspiration and soil moisture (especially in deeper soil layers).     

Multi‐variable and multi‐site calibration and validation of SWAT in a large mountainous catchment with high spatial variability

Many methods developed for calibration and validation of physically based distributed hydrological models are time consuming and computationally intensive. Only a small set of input parameters can be optimized, and the optimization often results in unrealistic values. In this study we adopted a multi‐variable and multi‐site approach to calibration and validation of the Soil Water Assessment Tool (SWAT) model for the Motueka catchment, making use of extensive field measurements. Not only were a number of hydrological processes (model components) in a catchment evaluated, but also a number of subcatchments were used in the calibration. The internal variables used were PET, annual water yield, daily streamflow, baseflow, and soil moisture. The study was conducted using an 11‐year historical flow record (1990–2000); 1990–94 was used for calibration and 1995–2000 for validation. SWAT generally predicted well the PET, water yield and daily streamflow. The predicted daily streamflow matched the observed values, with a Nash–Sutcliffe coefficient of 0·78 during calibration and 0·72 during validation. However, values for subcatchments ranged from 0·31 to 0·67 during calibration, and 0·36 to 0·52 during validation. The predicted soil moisture remained wet compared with the measurement. About 50% of the extra soil water storage predicted by the model can be ascribed to overprediction of precipitation; the remaining 50% discrepancy was likely to be a result of poor representation of soil properties. Hydrological compensations in the modelling results are derived from water balances in the various pathways and storage (evaporation, streamflow, surface runoff, soil moisture and groundwater) and the contributions to streamflow from different geographic areas (hill slopes, variable source areas, sub‐basins, and subcatchments). The use of an integrated multi‐variable and multi‐site method improved the model calibration and validation and highlighted the areas and hydrological processes requiring greater calibration effort. Copyright © 2005 John Wiley & Sons, Ltd.     

Assimilation of streamflow and in situ soil moisture data into operational distributed hydrologic models: Effects of uncertainties in the data and initial model soil moisture states

We assess the potential of updating soil moisture states of a distributed hydrologic model by assimilating streamflow and in situ soil moisture data for high-resolution analysis and prediction of streamflow and soil moisture. The model used is the gridded Sacramento (SAC) and kinematic-wave routing models of the National Weather Service (NWS) Hydrology Laboratory’s Research Distributed Hydrologic Model (HL-RDHM) operating at an hourly time step. The data assimilation (DA) technique used is variational assimilation (VAR). Assimilating streamflow and soil moisture data into distributed hydrologic models is new and particularly challenging due to the large degrees of freedom associated with the inverse problem. This paper reports findings from the first phase of the research in which we assume, among others, perfectly known hydrometeorological forcing. The motivation for the simplification is to reduce the complexity of the problem in favour of improved understanding and easier interpretation even if it may compromise the goodness of the results. To assess the potential, two types of experiments, synthetic and real-world, were carried out for Eldon (ELDO2), a 795-km² headwater catchment located near the Oklahoma (OK) and Arkansas (AR) border in the U.S. The synthetic experiment assesses the upper bound of the performance of the assimilation procedure under the idealized conditions of no structural or parametric errors in the models, a full dynamic range and no microscale variability in the in situ observations of soil moisture, and perfectly known univariate statistics of the observational errors. The results show that assimilating in situ soil moisture data in addition to streamflow data significantly improves analysis and prediction of soil moisture and streamflow, and that assimilating streamflow observations at interior locations in addition to those at the outlet improves analysis and prediction of soil moisture within the drainage areas of the interior stream gauges and of streamflow at downstream cells along the channel network. To assess performance under more realistic conditions, but still under the assumption of perfectly known hydrometeorological forcing to allow comparisons with the synthetic experiment, an exploratory real-world experiment was carried out in which all other assumptions were lifted. The results show that, expectedly, assimilating interior flows in addition to outlet flow improves analysis as well as prediction of streamflow at stream gauge locations, but that assimilating in situ soil moisture data in addition to streamflow data provides little improvement in streamflow analysis and prediction though it reduces systematic biases in soil moisture simulation.     

Evaluation of the WEPP model and digital elevation grid size,for simulation of streamflow and sediment yield in a heterogeneous catchment

The paper presents the result of an application of the GeoWEPP model in a heterogeneous semi‐agricultural catchment located in the northern Italian Apennines mountain range. The objectives were: (a) to evaluate the GeoWEPP model in a heterogeneous catchment in a Mediterranean climate and (b) to examine the effect of digital elevation model grid size on hydrological and sediment yield simulations. The catchment is characterized by large heterogeneity in geology, soil type, vegetation cover and topography. In addition, 10% of its area is occupied by calanchi (badlands), characterized by steep, bare soil and accentuated erosion. Experimental streamflow data were compared with those simulated by GeoWEPP for a period of eight years and the results were evaluated by means of statistical indices, with the analysis of the flow duration curve. Simulated sediment yields were compared with experimental data for one year. The streamflow cumulative annual results were satisfactory with NSE oscillating between 0.40 and 0.83 and RMSE between 1.1 and 2.9 mm. Also, the performance of the model with daily streamflow data was positive (NSE = 0.68 and RMSE = 1.9 mm). The flow duration curve indicated that GeoWEPP could represent the experimental streamflow for fluxes over 1 mm d^?1. The model performance for simulation of sediment yield was satisfactory with both digital elevation models of different grid sizes (NSE = 0.84 and 0.87). Indeed, the sensitivity analysis tests of the model showed that there was no statistically significant improvement in the accuracy of the digital elevation model between 10 and 2 m resolution. These results were confirmed for both streamflow as well as sediment yield. Additional sensitivity analysis of other model parameters performed on the entire catchment and badlands hillslopes showed that bedrock hydraulic conductivity primarily affected the model in both settings. Copyright © 2014 John Wiley & Sons, Ltd.     

Is there a superior conceptual groundwater model structure for baseflow simulation?

Previous work has shown that streamflow response during baseflow conditions is a function of storage, but also that this functional relationship varies among seasons and catchments. Traditionally, hydrological models incorporate conceptual groundwater models consisting of linear or non‐linear storage–outflow functions. Identification of the right model structure and model parameterization however is challenging. The aim of this paper is to systematically test different model structures in a set of catchments where different aquifer types govern baseflow generation processes. Nine different two‐parameter conceptual groundwater models are applied with multi‐objective calibration to transform two different groundwater recharge series derived from a soil‐atmosphere‐vegetation transfer model into baseflow separated from streamflow data. The relative performance differences of the model structures allow to systematically improve the understanding of baseflow generation processes and to identify most appropriate model structures for different aquifer types. We found more versatile and more aquifer‐specific optimal model structures and elucidate the role of interflow, flow paths, recharge regimes and partially contributing storages. Aquifer‐specific recommendations of storage models were found for fractured and karstic aquifers, whereas large storage capacities blur the identification of superior model structures for complex and porous aquifers. A model performance matrix is presented, which highlights the joint effects of different recharge inputs, calibration criteria, model structures and aquifer types. The matrix is a guidance to improve groundwater model structures towards their representation of the dominant baseflow generation processes of specific aquifer types. Copyright © 2014 John Wiley & Sons, Ltd.     

Modelling nitrogen dynamics for a mesoscale catchment using a minimum information requirement (MIR) concept / Modélisation des dynamiques de l'azote pour un bassin versant de taille moyenne,utilisant le concept de besoin minimum d'information

Abstract

Based on the water balance model LARSIM (Large Area Simulation Model), a model for the simulation of nitrogen transport was developed in a mesoscale catchment in southwest Germany. To meet the needs and constraints in river basin management, the nitrogen model was developed following the concept of minimum information requirement (MIR). The modelling concept uses only few calibration parameters and only easily accessible input data. Water balance, runoff generation and nitrogen transport were simulated on a 1-km² grid of sub-areas in which different land-use classes and soil characteristics were accounted. Temporal variability of the storage of mobile nitrogen were described using a monthly based mass balance. Nitrogen mobilization and transport was simulated using monthly values of different runoff components and data for soil properties, topography, hydrogeology and river network. The simulation was calibrated and validated using streamflow from two gauging stations and observed nitrogen concentrations at the catchment outlet, showing reasonable results for both streamflow and nitrogen dynamics. The results of the model application are discussed in the context of uncertainty problems and their implications for water management.     

Modelling spatio-temporal patterns of sediment yield and connectivity in a semi-arid catchment with the WASA-SED model

Abstract

Rainfall–runoff induced soil erosion causes important environmental degradation by reducing soil fertility and impacting on water availability as a consequence of sediment deposition in surface reservoirs used for water supply, particularly in semi-arid areas. However, erosion models developed on experimental plots cannot be directly applied to estimate sediment yield at the catchment scale, since sediment redistribution is also controlled by the transport conditions along the landscape. In particular, representation of landscape connectivity relating to sediment transfer from upslope areas to the river network is required. In this study, the WASA-SED model is used to assess the spatial and temporal patterns of water and sediment connectivity for a semi-arid meso-scale catchment (933 km²) in Brazil. It is shown how spatial and temporal patterns of sediment connectivity within the catchment change as a function of landscape and event characteristics. This explains the nonlinear catchment response in terms of sediment yield at the outlet.

Citation Medeiros, P. H. A., Güntner, A., Francke, T., Mamede, G. L. & de Araújo, J. C. (2010) Modelling spatio-temporal patterns of sediment yield and connectivity in a semi-arid catchment with the WASA-SED model. Hydrol. Sci. J. 55(4), 636–648.     

A comparative analysis of sediment yield simulation by empirical and process-oriented models in Thailand / Une analyse comparative de simulations de l'exportation sédimentaire en Thaïlande à l'aide de modèles empiriques et de processus

Abstract

Although soil erosion has been recognized worldwide as a threat to the sustainability of natural ecosystems, its quantification presents one of the greatest challenges in natural resources and environmental planning. Precise modelling of soil erosion and sediment yield is particularly difficult, as soil erosion is a highly dynamic process at the spatial scale. The main objective of this study was to simulate soil erosion and sediment yield using two fundamentally different approaches: empirical and process-oriented. The revised form of the Universal Soil Loss Equation (RUSLE), along with a sediment delivery distributed model (SEDD) and the Modified Universal Soil Loss Equation (MUSLE), which are popular empirical models, were applied in a sub-basin of the Mun River basin, Thailand. The results obtained from the RUSLE/SEDD and MUSLE models were compared with those obtained from a process-oriented soil erosion and sediment transport model. The latter method involves spatial disaggregation of the catchment into homogeneous grid cells to capture the catchment heterogeneity. A GIS technique was used for the spatial discretization of the catchment and to derive the physical parameters related to erosion in the grid cells. The simulated outcomes from the process-oriented model were found to be closer to observations as compared to the outcomes of the empirical approaches.     

The impact of climate change on groundwater recharge and runoff in a humid,equatorial catchment: sensitivity of projections to rainfall intensity

Abstract

Projected warming in equatorial Africa, accompanied by greater evaporation and more frequent heavy precipitation events, may have substantial but uncertain impacts on terrestrial hydrology. Quantitative analyses of climate change impacts on catchment hydrology require high-resolution (<50 km) climate data provided by regional climate models (RCMs). We apply validated precipitation and temperature data from the RCM PRECIS (Providing Regional Climates for Impact Studies) to a semi-distributed soil moisture balance model (SMBM) in order to quantify the impacts of climate change on groundwater recharge and runoff in a medium-sized catchment (2098 km²) in the humid tropics of southwestern Uganda. The SMBM explicitly accounts for changes in soil moisture, and partitions effective precipitation into groundwater recharge and runoff. Under the A2 emissions scenario (2070–2100), climate projections from PRECIS feature not only rises in catchment precipitation and modelled potential evapotranspiration by 14% and 53%, respectively, but also increases in rainfall intensity. We show that the common application of the historical rainfall distribution using delta factors to the SMBM grossly underestimates groundwater recharge (i.e. 55% decrease relative to the baseline period of 1961–1990). By transforming the rainfall distribution to account for changes in rainfall intensity, we project increases in recharge and runoff of 53% and 137%, respectively, relative to the baseline period.     

On the importance of soil moisture in calibration of rainfall–runoff models: two case studies

Streamflow modelling results from the GR4H and PDM hydrological models were evaluated in two Australian sub-catchments, using (1) calibration to streamflow and (2) joint-calibration to streamflow and soil moisture. Soil moisture storage in the models was evaluated against soil moisture observations from field measurements. The PDM had the best performance in terms of both streamflow and soil moisture estimations during the calibration period, but was outperformed by GR4H during validation. It was also shown that the soil moisture estimation was improved significantly by joint-calibration for the case where streamflow and soil moisture estimations were poor. In other cases, addition of the soil moisture constraint did not degrade the results. Consequently, it is recommended that GR4H be used, in preference to the PDM, in the foothills of the Murrumbidgee catchment or other Australian catchments with semi-arid to sub-humid climate, and that soil moisture data be used in the calibration process.     

Données isotopiques (8786/Sr) et changements hydrologiques depuis 15 000 ans sur l'Altiplano andin

Abstract

In catchments characterized by spatially varying hydrological processes and responses, the optimal parameter values or regions of attraction in parameter space may differ with location-specific characteristics and dominating processes. This paper evaluates the value of semi-distributed calibration parameters for large-scale streamflow simulation using the spatially distributed LISFLOOD model. We employ the Shuffled Complex Evolution Metropolis (SCEM-UA) global optimization algorithm to infer the calibration parameters using daily discharge observations. The resulting posterior parameter distribution reflects the uncertainty about the model parameters and forms the basis for making probabilistic flow predictions. We assess the value of semi-distributing the calibration parameters by comparing three different calibration strategies. In the first calibration strategy uniform values over the entire area of interest are adopted for the unknown parameters, which are calibrated against discharge observations at the downstream outlet of the catchment. In the second calibration strategy the parameters are also uniformly distributed, but they are calibrated against observed discharges at the catchment outlet and at internal stations. In the third strategy a semi-distributed approach is adopted. Starting from upstream, parameters in each subcatchment are calibrated against the observed discharges at the outlet of the subcatchment. In order not to propagate upstream errors in the calibration process, observed discharges at upstream catchment outlets are used as inflow when calibrating downstream subcatchments. As an illustrative example, we demonstrate the methodology for a part of the Morava catchment, covering an area of approximately 10 000 km². The calibration results reveal that the additional value of the internal discharge stations is limited when applying a lumped parameter approach. Moving from a lumped to a semi-distributed parameter approach: (i) improves the accuracy of the flow predictions, especially in the upstream subcatchments; and (ii) results in a more correct representation of flow prediction uncertainty. The results show the clear need to distribute the calibration parameters, especially in large catchments characterized by spatially varying hydrological processes and responses.     

Hydrological behaviour of a drained agricultural peat catchment in the tropics. 2: Time series transfer function modelling approach

Abstract

Transfer function models of the rainfall–runoff relationship with various complexities are developed to investigate the hydrological behaviour of a tropical peat catchment that has undergone continuous drainage for a long time. The study reveals that a linear transfer function model of order one and noise term of ARIMA (1,0,0) best represents the monthly rainfall–runoff relationship of a drained peat catchment. The best-fitted transfer function model is capable of illustrating the cumulative hydrological effects of the catchment when subjected to drainage. Transfer function models of daily rainfall–runoff relationships for each year of the period 1983–1993 are also developed to decipher the changes in hydrological behaviour of the catchment due to drainage. The results show that the amount of rain water temporarily stored in the peat soil decreased and the catchment has become more responsive to rainfall over the study period.

Editor Z.W. Kundzewicz; Associate editor D. Hughes

Citation Katimon, A., Shahid, S., Abd Wahab, A.K., and Shabri, A., 2013. Hydrological behaviour of a drained agricultural peat catchment in the tropics. 2: Time series transfer function modelling approach. Hydrological Sciences Journal, 58 (6), 1310–1325.