Gold mineralization in the West Hoggar shear zone,Algeria

The Amesmessa gold prospect is located along a vertical N-S-trending crustal-scale ductile shear zone; stretching lineations are subhorizontal. This major shear zone is a Late Pan African dextral strike-slip fault of the Pharusian Belt of the Tuareg Shield (Algeria). The Amesmessa shear zone is asymmetric: strong thermal and deformational gradients are present along its western border where biotitic ultramylonites are in contact with a rigid Archean complex (In Ouzzal block), whereas there is a progressive gradation, through mylonite then protomylonite, to the Proterozoic gneiss of the Eastern block which displays co-axial Pan African structures. The Amesmessa shear zone is characterized by the presence of a felsic dike complex emplaced during shearing, and forming the most important parent material for ultramylonites. Basic magmas and carbonatites also intruded within the shear zone. The gold-rich quartz veins are located within the ultramylonitic western part of the shear zone. These N-S-trending laminated quartz veins formed during the late increments of shearing (plastic/brittle transition), by repeated syntectonic hydraulic fracturing along zones of rheological contrast parallel to foliation. The ore mineral association (pyrite, galena, native gold, sphalerite) crystallized in the deformed quartz matrix along late shear planes. Undeformed E-W trending banded quartz veins are present in the mylonitic eastern part of the shear zone; their gold content is low and no native gold has been observed. A strong hydrothermal alteration resulted in the development (along the walls of the N-S gold-bearing quartz veins) of a 5-m-wide carbonate-sericite-albite-pyrite secondary mineral association which implies an important CO₂ supply and moderate temperature conditions. There is no alteration halo around the E-W quartz veins. Ultramylonites, hydrothermally altered rocks and quartz veins display similar REE patterns characterized by strong LREE enrichments. Shear-related fluids could be likely parental fluids for the Amesmessa gold mineralization and the associated hydrothermal alteration. Hydrothermal fluids were drawn into dilation zones and filled opening fractures along the main planar discontinuity of the most deformed rocks. The supply of CO₂ may come from a deep-seated source as suggested by the presence of carbonatite dikes in the shear zones and the existence of CO₂-H₂O-rich fluid inclusions in quartz. The location of the gold-bearing quartz veins in the western part of the shear zone can be explained by the presence of strong thermal and rheological gradients.     

Intracontinental thrusts and inclined transpression along eastern margin of the East Dharwar craton, India

Recent works suggest Proterozoic plate convergence along the southeastern margin of India which led to amalgamation of the high grade Eastern Ghats belt (EGB) and adjoining fold-and-thrust belts to the East Dhrawar craton. Two major thrusts namely the Vellikonda thrust at the western margin of the Nellore Schist belt (NSB) and the Maidukuru thrust at the western margin of the Nallamalai fold belt (NFB) accommodate significant upper crustal shortening, which is indicated by juxtaposition of geological terranes with distinct tectonostratigraphy, varying deformation intensity, structural styles and metamorphic grade. Kinematic analysis of structures and fabric of the fault zone rocks in these intracontinental thrust zones and the hanging wall and footwall rocks suggest spatially heterogeneous partitioning of strain into various combinations of E-W shortening, top-to-west shear on stratum parallel subhorizontal detachments or on easterly dipping thrusts, and a strike slip component. Although relatively less prominent than the other two components of the strain triangle, non-orthogonal slickenfibres associated with flexural slip folds and mylonitic foliation-stretching lineation orientation geometry within the arcuate NSB and NFB indicate left lateral strike slip subparallel to the overall N-S trend. On the whole an inclined transpression is inferred to have controlled the spatially heterogeneous development of thrust related fabric in the terrane between the Eastern Ghats belt south of the Godavari graben and the East Dharwar craton.     

Quartz fabrics in shear-zone mylonites: Evidence for a major imprint due to late strain increments

Geometrical relations between quartz C-axis fabrics, textures, microstructures and macroscopic structural elements (foliation, lineation, folds…) in mylonitic shear zones suggest that the C-axis fabric mostly reflects the late-stage deformation history. Three examples of mylonitic thrust zones are presented: the Eastern Alps, where the direction of shearing inferred from the quartz fabric results from a late deformation oblique to the overall thrusting; the Caledonides nappes and the Himalayan Main Central Thrust zone, where, through a similar reasoning, the fabrics would also reflect late strain increments though the direction of shearing deduced from quartz fabric remains parallel to the overall thrusting direction. Hence, the sense of shear and the shear strain component deduced from the orientation of C-axis girdles relative to the finite strain ellipsoid axes are not simply related nor representative of the entire deformation history.     

Transpressional imbricate thrust zones controlling gold mineralization in the Central Eastern Desert of Egypt

Strongly deformed volcaniclastic metasediments and ophiolitic slices hosting the Sukari gold mineralization display evidence of a complex structural evolution involving three main ductile deformational events (D₁–D₃). D₁ produced ENE-trending folds associated with NNW-propagating thrust slices and intrusion of the Sukari granite (689 ± 3 Ma). D₂ formed a moderately to steeply dipping, NNW-trending S₂ foliation curved to NE and developed arcuate structure constituting the Kurdeman shear zone (≤ 595 Ma) and East Sukari imbricate thrust belt. Major NE-trending F₂ folds, NW-dipping high-angle thrusts, shallow and steeply plunging mineral lineation and shear indicators recorded both subhorizontal and subvertical transport direction during D₂. D₃ (560–540 Ma) formed NNE-trending S₃ crenulation cleavage, tight F₃ folds, Sukari Thrust and West Sukari imbricate thrust. The system of NW-trending sinistral Kurdeman shear zone (lateral ramps and tear faults) and imbricate thrusts (frontal ramps) forming the actuate structure developed during SE-directed thrusting, whereas the prevailing pattern of NNE-trending dextral Sukari shear zone and imbricate thrusts forming Sukari thrust duplex developed during NE-directed tectonic shearing. Sukari granite intruded in different pluses between 689 and 540 Ma and associated with at least four phases of quartz veins with different geometry and orientation. Structural analysis of the shear fabrics indicates that the geometry of the mineralized quartz veins and alteration patterns are controlled by the regional NNW- and NE-trending conjugate zones of transpression. Gold-bearing quartz veins are located within NNW-oriented sinistral shear zones in Kurdeman gold mine area, within steeply dipping NW- and SE dipping thrusts and NE- and NS-oriented dextral and sinistral shear zones around Sukari mine area, and along E-dipping backthrusts and NW-SE and N-S fractures in Sukari granite. The high grade of gold mineralization in Sukari is mainly controlled by SE-dipping back-thrusts branched from the major NW-dipping Sukari Thrust. The gold mineralization in Sukari gold mine and neighboring areas in the Central Eastern Desert of Egypt is mainly controlled by the conjugate shear zones of the Najd Fault System and related to E-W directed shortening associated with oblique convergence between East and West Gondwana.     

Evidence for structural discordance in the inverted metamorphic sequence of Sikkim Himalaya: Towards resolving the Main Central Thrust controversy

Inverted metamorphism in the Himalayas is closely associated with the Main Central Thrust (MCT). In the western Himalayas, the Main Central Thrust conventionally separates high grade metamorphic rocks of the Higher Himalayan Crystalline Sequence (HHCS) from unmetamorphosed rocks of the Inner sedimentary Belt. In the eastern Himalayas, the Inner sedimentary Belt is absent, and the HHCS and meta-sedimentary Lesser Himalayan Sequence (LHS) apparently form a continuous Barrovian metamorphic sequence, leading to confusion about the precise location of the MCT. In this study, it is demonstrated that migmatitic gneisses of the sillimanite zone in the higher structural levels of the HHCS are multiply deformed, with two phases of penetrative fabric formation (S_1HHCS and S_2HHCS) followed by third folding event associated with a spaced, NW-SE trending, north-east dipping foliation (S_3HHCS). The underlying LHS schists (kyanite zone and lower) are also multiply deformed, with the bedding S₀ being isoclinally folded (F_1LHS), and subsequently refolded (F_2LHS and F_3LHS). The contact zone between the HHCS and LHS is characterized by ductile, top-to-the southwest shearing and stabilization of a pervasive foliation that is consistently oriented NW-SE and dips northeast. This foliation is parallel to the S_3HHCS foliation in the HHCS, and the S_2LHS in the LHS. Early lineations in the HHCS and LHS also show different dispersions across the contact shear zone, implying that pre-thrusting orientations of the two units were distinct. The contact shear zone is therefore interpreted to be a plane of structural discordance, shows a shear sense consistent with thrust movement and is associated with mineral growth during Barrovian metamorphism. It may well be considered to represent the MCT in this region.     

The Eastern Ghats Mobile Belt,India: A Collage of Juxtaposed Terranes (?)

Examination of Landsat TM images, reconnaissance field traverses and the published geological maps from the Eastern Ghats Mobile Belt (EGMB), India, reveal a network of major ductile shear zones both within and at the margins. These shear zones are characterized by mylonitic foliation, grain size reduction, metamorphic retrogression, stretching lineations and distinct signatures of alkaline, anorthositic and granitic magmatism. These shear zones divide the EGMB into distinct terranes, which are heterogeneously deformed with extensive tracts of foliated mylonitic gneisses and ultramylonites. The main gneissic foliation in all the terranes is refolded in near non-coaxial manner generally about the axis subparallel to the elongation of the terrane.Structural history in each terrane is distinct in the orientation of stretching lineations, attitude of gneissosity and early fold axial planes, lithological assemblages and available geochronological data. It is possible to recognise nine large terranes within the EGMB and the characteristics of each terrane have been described. The terrane distribution in the EGMB could well fit a thrust tectonic, allochthonous model of amalgamation and accretion. Different terranes could be different thrust nappes or allochthonous tectonic sheets representing tectono-stratigraphic terranes.     

桂北摩天岭花岗岩体中片麻状构造的成因

摩天岭花岗岩体为一大型韧性剪切带,岩体中广泛发育的片麻理实际上是糜棱面理,其总体走向为NNE向,倾向NWW-SWW,倾角30～70°,拉伸线理向SWW或NWW倾伏,根据S-C面理构造、长石和石英不对称眼球等剪切指向标志体判断,韧性剪切带运动学为正滑剪切。     

Strain geometry,microstructure and metamorphism in the dextral transpressional Mubarak Shear Belt,Central Eastern Desert,Egypt

Mubarak shear belt provides an opportunity to investigate quantitative finite strain (Rs), proportions of pure shear and simple shear components, sense of shear indicators, subhorizontal to steeply plunging mineral lineations, in a dextral transpressional zone. The structural style of the Mubarak shear belt is consistent with dextral transpression within the Central Eastern Desert where dextral and reverse shear have developed simultaneously with the regional foliation. The high strain zone of the Mubarak shear belt is characterized by steeply dipping foliation with sub-horizontal stretching lineation (simple shear) surrounded by thrust imbrications with slightly plunging stretching lineations. Strain estimates from the Mubarak shear belt are used to determine how pure and simple shear components of deformation are partitioned. The axial ratios in XZ sections range from 1.16 to 2.33 with the maximum stretch, S _X , ranges from 1.06 to 1.48. The minimum stretch, S _Z , ranges from 0.65 to 0.92 indicating a moderate variation in vertical shortening. Volcaniclastic metasediments and metagabbros were subjected to prograde low-grade regional metamorphism in the range of greenschist to lower amphibolite facies (450–650°C at 2–4 kbar). Medium pressure (6–8 kbar at 530°C) was estimated from the high strain zone within the dextral strike-slip shear zones. Retrograde metamorphism occurred at a temperature range of 250–280°C. There is a trend towards decreasing the ratio of 100Mg/(Mg + Fe_tot + Mn) away from the high strain zone of the Mubarak shear belt. Integrated strain and temperature estimates indicate that the simple shear (non-coaxial) components of deformation played a significant role in formation and exhumation of the Mubarak shear belt during the accumulation of finite strain and consequently during progressive transpression and thrusting.     

The kinematic history of the Singhbhum Shear Zone

The progressive deformation of the Singhbhum Shear Zone (SSZ) involved the initiation of a mylonitic foliation, its deformation by three generations of reclined folds and superposition of two later groups of folds, i.e., a group of asymmetric folds with subhorizontal or gently plunging axes and a group of gentle and open, transverse and more or less upright folds. The occurrence of sheath folds and U-shaped deformed lineations indicate that the reclined folds were produced by rotation of fold hinges through large angles. The total displacement along the SSZ was compounded of displacements along numerous mesoscopic shear zones. The cleavages in the shear lenses and the mesoscopic shear zones cannot be distinguished as C and S surfaces. They have the same kinematic significance and were produced by ductile deformation, although there were localized discontinuous displacements along both sets,-of cleavages. A mylonitic foliation had formed before the development of the earliest recognizable folds. Its time of formation and folding could be synchronous, diachronous or partly overlapping in time in the different domains of the SSZ.     

Determining heterogeneous deformation for granitic rocks in the northern thrust in Wadi Mubarak belt,Eastern Desert,Egypt

Finite-strain was studied in the mylonitic granitic and metasedimentary rocks in the northern thrust in Wadi Mubarak belt to show a relationship to nappe contacts between the old granitic and metavolcano-sedimentary rocks and to shed light on the heterogeneous deformation for the northern thrust in Wadi Mubarak belt. We used the R_f/ϕ and Fry methods on feldspar porphyroclasts, quartz and mafic grains from 7 old granitic and 7 metasedimentary samples in the northern thrust in Wadi Mubarak belt. The finite-strain data shows that old granitic rocks were moderate to highly deformed and axial ratios in the XZ section range from 3.05 to 7.10 for granitic and metasedimentary rocks. The long axes (X) of the finite-strain ellipsoids trend W/WNW and E/ENE in the northern thrust in Wadi Mubarak belt. Furthermore, the short axes (Z) are subvertical associated with a subhorizontal foliation. The value of strain magnitudes mainly constants towards the tectonic contacts between the mylonitic granite and metavolcano-sedimentary rocks. The data indicate oblate strain symmetry (flattening strain) in the mylonitic granite rocks. It is suggested that the accumulation of finite strain was formed before or/and during nappe contacts. The penetrative subhorizontal foliation is subparallel to the tectonic contacts with the overlying nappes and foliation was formed during nappe thrusting.     

How do lineations reflect the strain history of transpressive shear zones? The example of the active Alpine Fault zone,New Zealand

Lineations within mylonites exhumed in the hanging wall of New Zealand's active Alpine Fault zone have a complicated relationship to contemporary plate kinematics. The shear zone is triclinic and macroscopic object lineations are not usually parallel to the simple shear direction, despite high total simple shear strains (γ ≥ 150). This is mostly because the lineations are inherited from pre-mylonitic fabrics, and have not been rotated into parallelism with the mylonitic stretching direction (which pitches c. 44° in the fault plane). Furthermore, some lineations have been variably rotated depending on whether they are present in shear bands or microlithons, which accommodated bulk strains with different vorticities. Total strains required to obtain parallelism between the finite maximum principal stretching direction calculated from transpression models and these mylonitic lineations, are pure shear stretch, S₁ ∼ 3.5; simple shear 11.7 < γ < 150. The observations and numerical models also show that linear features are not rotated much during simple shear because they initially lie within the shear plane, and that inherited fabric components may not be destroyed until very high simple shear strains have been attained.     

Domainal and fabric heterogeneities in the Cap de Creus quartz mylonites

A characteristic domainal configuration is reported for both micro-structures and c-axis fabrics in the Cap de Creus pure quartz mylonites as displayed in 50 samples from the centres of different shear zones. Three types of domains are found a, b and c. Each domain has a distinct c-axis orientation pattern. These three fabric elements, also labelled a, b and c make up the total fabric. c-axis fabrics are symmetric or asymmetric with respect to the main mylonitic foliation depending on the presence or absence of the b domain and its fabric element. The boundaries of the domains are parallel to the main mylonitic foliation. Two domain types, a and b display an internal foliation defined by preferred grain boundary alignment parallel to the direction of optical orientation within the domain. The internal foliations are oblique to the main mylonitic foliation in two different senses giving the sample a herring-bone appearance. These internal foliations are shown to be related to extensional crenulations. Domains are not produced by host-controlled recrystallization. The fabric elements and corresponding domains are the expression of kinematic heterogeneities on the scale of the thin section.     

Transpressional regime in southern Arabian Shield: Insights from Wadi Yiba Area, Saudi Arabia

Detailed field-structural mapping of Neoproterozoic basement rocks exposed in the Wadi Yiba area, southern Arabian Shield, Saudi Arabia illustrates an important episode of late Neoproterozoic transpression in the southern part of the Arabian-Nubian Shield (ANS). This area is dominated by five main basement lithologies: gneisses, metavolcanics, Ablah Group (meta-clastic and marble units) and syn- and post-tectonic granitoids. These rocks were affected by three phases of deformation (D₁–D₃). D₁ formed tight to isoclinal and intrafolial folds (F₁), penetrative foliation (S₁), and mineral lineation (L₁), which resulted from early E-W (to ENE-WSW) shortening. D₂ deformation overprinted D₁ structures and was dominated by transpression and top-to-the-W (?WSW) thrusting as shortening progressed. Stretching lineation trajectories, S-C foliations, asymmetric shear fabrics and related mylonitic foliation, and flat-ramp and duplex geometries further indicate the inferred transport direction. The N- to NNW-orientation of both “in-sequence piggy-back thrusts” and axial planes of minor and major F₂ thrust-related overturned folds also indicates the same D₂ compressional stress trajectories. The Wadi Yiba Shear Zone (WYSZ) formed during D₂ deformation. It is one of several N-S trending brittle-ductile Late Neoproterozoic shear zones in the southern part of the ANS. Shear sense indicators reveal that shearing during D₂ regional-scale transpression was dextral and is consistent with the mega-scale sigmoidal patterns recognized on Landsat images. The shearing led to the formation of the WYSZ and consequent F₂ shear zone-related folds, as well as other unmappable shear zones in the deformed rocks. Emplacement of the syn-tectonic granitoids is likely to have occurred during D₂ transpression and occupied space created during thrust propagation. D₁ and D₂ structures are locally overprinted by mesoscopic- to macroscopic-scale D₃ structures (F₃ folds, and L₃ crenulation lineations and kink bands). F₃ folds are frequently open and have steep to subvertical axial planes and axes that plunge ENE to ESE. This deformation may reflect progressive convergence between East and West Gondwana.     

Polyphase tectonics and late Variscan extension in Austria (Moldanubian Zone,Strudengau area)

New data suggest syn-convergent extrusion and polyphase tectonics followed by late Variscan extension in the Strudengau area of the southern Moldanubian zone in Austria. The tectonic history can be summarized as follows: (1) The oldest ductile event is observed in HT/LP metamorphic pelitic gneisses, which preserve E-dipping foliation planes (D₁-fabric) with NW–SE-trending lineations. (2) The overlying gneisses record HT/HP conditions with decompression-induced anatexis in the central part of the domain. These gneisses exhibit N–S trending, horizontal lineations along steep-dipping foliation planes (D₂-fabric) crosscutting the D₁-fabric of the pelitic gneisses. Along the margin, these rocks have been strongly mylonitized under amphibolite facies conditions (D₂). D₂ is interpreted as a significant vertical shear zone, which juxtaposes the HT/LP rocks against the orogenic lower crust. (3) Lastly, the whole area is overprinted by localized shear zones (D₃-fabric) with top-to-the-NW kinematics. This newly discovered Strudengau shearing event is associated with isoclinal folding that possesses axial planes parallel to the mylonitic foliation and fold axes parallel to the stretching lineations. Initial mylonitization occurred under greenschist facies, representing the latest ductile event of the Strudengau area. The new geochronological data presented here indicate a narrow time frame (c. 323–318 Ma) for the D₃ deformation. Therefore, this event is contemporaneous with the intrusion of the granites of the South Bohemian Batholith (330–310 Ma). The nearby South Bohemian Batholith and generally steep dyke swarms in the Strudengau area and to the north trend in a NE–SW preferred orientation, interpreted to be D₃-synkinematic magmatism. In a regional context, the NW–SE stretching during D₃ together with the synkinematic intrusion of dykes is associated with late orogenic extension in the Austrian Moldanubian Zone. Kinematic data of brittle normal faults and tension gashes are consistent with NW–SE-oriented extension under cooler conditions.     

Transpression,extrusion, partitioning,and lateral escape in the middle crust: Significance of structures,fabrics, and kinematics in the Bronson Hill zone,southern New England,U.S.A.

Fabrics in the mid-crustal Bronson Hill zone of the southern New England Appalachian orogen record a range of apparent finite strains and conflicting kinematics, but structural relationships indicate coeval development. At the smallest scale of this study, shortening was accommodated in granitic orthogneiss, while transcurrent deformation was partitioned into relatively thin zones of metastratified rocks along the margins. The Monson orthogneiss can be broadly characterized by subvertical to steeply dipping S > L tectonites, subvertical to subhorizontal stretching lineations, closed to isoclinal folds, and dextral/reverse kinematics. The east-bounding Conant Brook shear zone and Greenwich syncline are characterized by steeply dipping mylonitic foliations, a range of lineations, and dextral/reverse kinematic indicators. The west-bounding Mt. Dumplin high strain zone is comprised of steeply dipping mylonites, subhorizontal lineations, and sinistral/normal kinematics. These structures reflect coeval partitioned dextral transpression, vertical extrusion, and north-directed lateral escape of the orthogneiss that was facilitated by bounding conjugate shear zones. Comparison of structural subdomains with transpressional modeling indicates vertical pseudo-monoclinic to inclined triclinic coaxial to simple shear influenced transpression. Compatibility between laterally adjacent subdomains was maintained by meso-/microscale partitioning. Absolute and relative timing constraints show that transpression was sustained from 330 Ma to 300 Ma.     

Deformation of footwall rock of Phulad Shear Zone,Rajasthan: Evidence of transpressional shear zone

Phulad Shear Zone (PSZ) of Delhi Fold Belt in Rajasthan is a northeasterly striking ductile shear zone with a well developed mylonitic foliation (035/70E) and a downdip stretching lineation. The deformation in the PSZ has developed in a transpressional regime with thrusting sense of movement. The northeastern unit, i.e., the hanging wall contains a variety of rocks namely calc-silicates, pelites and amphibolites and the southwestern unit, i.e., the footwall unit contains only granitic rocks. Systematic investigation of the granites of the southwestern unit indicate a gradual change in the intensity of deformation from a distance of about 1 km west of the shear zone to the shear zone proper. The granite changes from weakly deformed granite to a mylonite/ultramylonite as we proceed towards the PSZ. The weakly deformed granite shows a crude foliation with the same attitude of mylonitic foliation of the PSZ. Microscopic study reveals the incipient development of C and S fabric with angle between C and S varying from 15 ^° to 24 ^°. The small angle between the C and S fabric in the least deformed granite variety indicates that the deformation has strong pure shear component. At a distance of about 1 m away from the PSZ, there is abrupt change in the intensity of deformation. The granite becomes intensely foliated with a strong downdip lineation and the rock becomes a true mylonite. In mesoscopic scale, the granite shows stretched porphyroclasts in both XZ and YZ sections indicating a flattening type of deformation. The angle between the C and S fabric is further reduced and finally becomes nearly parallel. In most places, S fabric is gradually replaced by C fabric. Calculation of sectional kinematic vorticity number ( W_n) from the protomylonitic and mylonite/ultramylonite granites varies from 0.3 ± 0.03 to 0.55 ± 0.04 indicating a strong component of pure shear. The similarity of the geometry of structures in the PSZ and the granites demonstrates that the deformation of the two units is broadly synchronous and the deformation in both the units is transpressional.     

Determining the reference frame for kinematic analysis in S-tectonites using AMS

Salem-Attur shear zone in the Southern Granulite Terrane demarcates the tectonic boundary between Archaean granulites of Dharwar craton and the Palaeoproterozoic granulites of Salem area. The shear zone marks a low angle thrust which has been steepened at places due to late stage folding. Static recrystallisation during late stage folding has removed the strain marker of mylonites to large extent. However, in a few places S-C angle and porphyroclasts are preserved and have been used to compute the strain. The strain shows apparent flattening by simple shear deformation with 35 % volume loss. A minimum displacement along the thrust has been computed to be 2.7 km. The strain k values increases with r suggesting the strain approaching towards prolate field with increase in strain intensity. The above study suggests the Salem-Attur shear zone is a thrust with low to moderate deformation and volume loss.     

Kinematic analysis using AMS data from a deformed granitoid

This study highlights the usefulness of anisotropy of magnetic susceptibility data from a deformed granitoid in deciphering its kinematic evolution vis-à-vis shear zone. Data are presented from the Chakradharpur Granitoid (CKPG) that lies to the north of the northerly dipping, ENE–WSW striking Singhbhum Shear Zone (SSZ; eastern India). Whilst the foliation recorded in the field in some parts of the granitoid is parallel to the SSZ, the magnetic foliation is N54°E/90° (mean orientation). It is suggested that the magnetic fabric provides a window into an evolutionary stage prior to the final shearing/thrusting event, the evidence of which is preserved on the mesoscopic scale. It is envisaged that during the initial stages of deformation there was simple shear along the evolving SSZ that resulted in sinistral strike-slip movement; the vorticity axis at this stage was steeply plunging and sense of rotation was anticlockwise. Space was generated in a direction ∼N25°E (perpendicular to maximum-Instantaneous Stretching Axis) into which CKPG emplaced synchronously with regional deformation and evolving SSZ. With continued deformation, there was thrusting along the SSZ. The vorticity axis flipped to a sub-horizontal orientation, thus leading to the development of down-dip stretching lineations and sheath folds within the SSZ. However, at the same time, the vorticity axis responsible for fabric evolution within the syntectonically crystallizing/cooling CKPG was steeply plunging with clockwise rotation. The magnetic foliation (mean orientation N54°E/90°) developed during the final stage of syntectonic crystallization. However, deformation in the region and thrusting along the SSZ continued even after the CKPG had fully crystallized and solidified, which led to the development of the ENE–WSW striking mesoscopic foliation that is parallel with the SSZ. We propose that the angle between the magnetic foliation and the SSZ/foliation recorded in the field, enables to decipher the kinematic vorticity number of flow responsible for fabric evolution of the CKPG. It is concluded that transpression was an important mechanism, and during regional deformation, whilst the SSZ developed structures by dominantly simple shear, the CKPG underwent dominantly pure shear.     

Magnetic fabric study across the Ailao Shan–Red River shear zone

The anisotropy of magnetic susceptibility (AMS) of 351 specimens from 51 sites across the Ailao Shan–Red River shear zone (ASRR) was measured to determine its magnetic fabric. Rocks range westward from core schistose gneiss, through low-grade schist, to Triassic sediment. Magnetic ellipticity analysis shows that 41 of 51 sites have an oblate compressional fabric and the other 10 sites have a prolate fabric. P_J value drops by 22.4% in the low-grade schist and by 27.4% in the Triassic sediment on average with respect to the gneiss, suggesting a rapid decrease of deformational intensity. The directions of principal susceptibilities are closely related to the deformation of the Ailao Shan–Red River shear zone. The susceptibility plane always coincides with the schistosity or cleavage plane. Most of the maximum susceptibility axes trend NW–SE. In the shear zone, the maximum susceptibility axes (K_max) are parallel to the lineation within the foliation plane. With increasing distance from the shear zone, there is a trend that they become parallel to the down-dip of reverse faults or cleavage. This indicates changes in deformation mode, inside and outside the shear zone. Within the shear zone, horizontal movement is dominant. Outside, shortening prevails. The overall minimum magnetic axes align NE–SW with subhorizontal to low dip angles, suggesting that the dominant shortening is NE–SW directed. Caution should be exercised when AMS is used to determine shear sense in strong shear zones because the angle between the minimum susceptibility axis (K_min) and pole of foliation is small, and also because the attitude of foliation varies from place to place. They result in unreliable or even wrong shear sense. Another important result is the axial ratio of magnetic susceptibility ellipsoid along the study section. With these data, it is possible to establish an axial ratio relationship between the finite strain ellipsoid and magnetic susceptibility ellipsoid for quantitative calculation of offset.     

Ductile Shearing in Attur Shear Zone and its Relation with Moyar Shear Zone, South India

In the eastern part of southern Peninsular India, the charnockitic hills of the Madras block are cut across by the E-W trending Attur shear zone (ASZ) which is characterised by a thick (1 to 1.5 km) phyllonite zone, showing intense mylonitisation due to ductile shearing. Steeply plunging (70°–80°) stretching lineation on steeply dipping mylonitic foliation within this zone indicates a relative vertical upliftment of the adjacent blocks. A dextral shearing event from west to east is envisaged from the kinematic analysis of shear sense indicators such as S-C fabric, asymmetric folds, asymmetric augens and asymmetric porphyroclasts. Simultaneous development of these features, related to vertical and horizontal movements may be explained by the mechanism of transpressional deformation. The Attur shear zone may be correlated with the Moyar shear zone based on distinct lithological and structural similarities.