http://www.sciencedirect.com/science/article/pii/S1674987112000618

The Moyar Shear Zone(MSZ) of the South Indian granulite terrain hosts a prominent syenite pluton (～560 Ma) and associated NW-SE to NE-SW trending mafic dyke swarm(～65 Ma and 95 Ma). Preliminary magnetic fabric studies in the mafic dykes,using Anisotropy of Magnetic Susceptibly(AMS) studies at low-field,indicate successive emplacement and variable magma flow direction.Magnetic lineation and foliation in these dykes are identical to the mesoscopic fabrics in MSZ mylonites,indicating shear zone guided emplacement.Spatial distribution of magnetic lineation in the dykes suggests a common conduit from which the source magma has been migrated.The magnetic foliation trajectories have a sigmoidal shape to the north of the pluton and curve into the MSZ suggesting dextral sense of shear.Identical fabric conditions for magnetic fabrics in the syenite pluton and measured field fabrics in mylonite indicate syntectonic emplacement along the Proterozoic crustal scale dextral shear zone with repeated reactivation history.     

The Chinamora batholith, Zimbabwe: structure and emplacement-related magnetic rock fabric

The origin of dome-and-keel structural geometries in Archean granite–greenstone terrains appears to lack any modern analogues and is still poorly understood. The formation of these geometries is investigated using structural and anisotropy of magnetic susceptibility (AMS) data for the Chinamora batholith in Zimbabwe. The roughly circular-shaped batholith is surrounded by ca. 2.72–2.64 Ga greenstones. The batholith granitoid suites have been divided on the basis of their ages and fabric relationships into four distinct units: (i) banded basement gneisses; (ii) granodioritic gneisses; (iii) equigranular granites; and (iv) central porphyritic granites. In the gneissic granites a partial girdle (N–S) of poles to the magnetic foliation is developed that has been folded around a consistent, flat lying magnetic lineation plunging at shallow angles to the E or W. In the equigranular granites, the magnetic lineation generally plunges to the NW. The magnetic foliation has a variable strike, no clear trends can be distinguished. The AMS measurements of the porphyritic granite revealed a NW–SE striking foliation and showed subhorizontal magnetic lineations. The magnetic foliation is subparallel to the macroscopic foliation. Wall rocks are moderately inclined and show radial or concentric lineations, triaxial strain ellipsoids and kinematics that demonstrate off-the-dome sliding and coeval pluton expansion. The results of the observations do not point to a single emplacement process. Neither the observed structural data nor the magnetic fabric support a model envisaging spherically ‘ballooning’. It is argued that pluton diapirism played a major part in the formation of the fabrics in the gneisses, whereas the fabrics in the porphyritic granites reflect emplacement as laccolith-like sheets.     

Fault-controlled pluton emplacement in the Sevier fold-and-thrust belt of southwest Montana,USA

Problems associated with syncompressional pluton emplacement center on the need to make room for magma in environments where crustal shortening, not extension, occurs on a regional scale. New structural data from the Pioneer and Boulder batholiths of southwest Montana, USA, suggest emplacement at the top of frontal thrust ramps as composite tabular bodies at crustal depths between 1 and 10 km. Frontal thrust facilitated pluton emplacement was accommodated by: (1) a magma feeder zone created along the ramp interface; (2) providing ‘releasing steps’ at ramp tops that serve as initial points of emplacement and subsequent pluton growth; and (3) localizing antithetic back-thrusts that assist in pluton ascent. A model of magma emplacement is proposed that involves these elements. This model for syntectonic ramp-top emplacement of plutons helps explain how space is made for plutons within fold-and-thrust belts.     

Magnetic fabrics and microstructures of the Jurassic Shah-Kuh granite pluton (Lut Block, Eastern Iran) and geodynamic inference

The Jurassic Shah-Kuh granite pluton was emplaced in the northeastern part of the Lut Block (Eastern Iran) while this block was a part of the active margin under which the Tethys ocean, that separated Arabia from Central Iran, was subducting. Since this time, the Lut Block has rotated and migrated northward up to its present position. This structural study of the Shah-Kuh aims at strengthening the evidence of its original geodynamical location. Thanks to a systematic collection of oriented samples in the field, well-defined fabric and microstructural patterns were deduced from magnetic fabric measurements and optical microscopy observations. The overall magnetic fabric of the pluton yields vertical, north–south striking foliations and shallow lineations plunging to the north. The corresponding microstructures attest to their formation in the magmatic stage, i.e. during emplacement. Subsequent deformation, characterized by (sub)mylonitic microstructures, has modified the original fabric into a northwest and locally a west–northwest trend inside a two kilometre-wide corridor. This corridor reflects the trace of a sinistral shear zone that offsets the previous north–south magmatic pattern of the pluton. The latter magmatic pattern is proposed to result from the shear component of strain that was parallel to the ancient active margin during pluton emplacement, as a result of strain partitioning, a situation frequently documented at convergent margins. Sinistral shear along an  E–W directed south-facing active margin, assuming a northeastward slip vector for the Tethys ocean during the Jurassic, and accepting a  150° counterclockwise rotation of the Lut Block after emplacement of the Shah-Kuh pluton, best explains both the magmatic and the solid-state lineation patterns.     

RELATIVE PLASTICITY OF ROCKS AS A CONTROLLING FACTOR IN ORE-DEPOSITION

Akba-i-Dzhurnon intrusion possesses a great many of the common primary fractures, planar and linear flow structures, schlieren-arch fabric features of many of the medium to coarse grained to porphyritic textured Precambrian plutons of the world. The following features are most important with regard to this pluton: 1) a sequential triple emplacement of granite-adamellite magma occurred, 2) the Main phase emplacement lowered magma level in magma chamber and resulted in subsidence of the core of Archannaydansk anticline under the dense sheeted-arch structure of the Tangisaysk thrust and the space created was occupied by magma; 3) subphase granites were injected along same fault systems as main phase pulses but were between the earlier injections and intervals between injections of different phases were short; 4), the pluton is post-tectonic; 5) porphyritic textures were developed in a combined pneumatolytic-magmatic crystallization stage; 6) trachytic structure formed during crystallization of orthoclase, and 7) conditions of alternating roof load and lateral pressure acting roughly perpendicular to the long axis of the pluton prevailed during its emplacement. — R. M. Hutchinson.     

Conflicting structural and geochronological data from the Ibituruna quartz-syenite (SE Brazil): Effect of protracted “hot” orogeny and slow cooling rate?

The Ibituruna quartz-syenite was emplaced as a sill in the Ribeira-Araçuaí Neoproterozoic belt (Southeastern Brazil) during the last stages of the Gondwana supercontinent amalgamation. We have measured the Anisotropy of Magnetic Susceptibility (AMS) in samples from the Ibituruna sill to unravel its magnetic fabric that is regarded as a proxy for its magmatic fabric. A large magnetic anisotropy, dominantly due to magnetite, and a consistent magnetic fabric have been determined over the entire Ibituruna massif. The magmatic foliation and lineation are strikingly parallel to the solid-state mylonitic foliation and lineation measured in the country-rock. Altogether, these observations suggest that the Ibituruna sill was emplaced during the high temperature (~ 750 °C) regional deformation and was deformed before full solidification coherently with its country-rock. Unexpectedly, geochronological data suggest a rather different conclusion. LA-ICP-MS and SHRIMP ages of zircons from the Ibituruna quartz-syenite are in the range 530–535 Ma and LA-ICP-MS ages of zircons and monazites from synkinematic leucocratic veins in the country-rocks suggest a crystallization at ~ 570–580 Ma, i.e., an HT deformation > 35My older than the emplacement of the Ibituruna quartz-syenite. Conclusions from the structural and the geochronological studies are therefore conflicting. A possible explanation arises from ⁴⁰Ar–³⁹Ar thermochronology. We have dated amphiboles from the quartz-syenite, and amphiboles and biotites from the country-rock. Together with the ages of monazites and zircons in the country-rock, ⁴⁰Ar–³⁹Ar mineral ages suggest a very low cooling rate: < 3 °C/My between 570 and ~ 500 Ma and ~ 5 °C/My between 500 and 460 Ma. Assuming a protracted regional deformation consistent over tens of My, under such stable thermal conditions the fabric and microstructure of deformed rocks may remain almost unchanged even if they underwent and recorded strain pulses separated by long periods of time. This may be a characteristic of slow cooling “hot orogens” that rocks deformed at significantly different periods during the orogeny, but under roughly unchanged temperature conditions, may display almost indiscernible microstructure and fabric.     

Diapiric emplacement in the upper crust of a granitic body: the La Bazana granite (SW Spain)

The ascent and emplacement of granites in the upper crust is a major geological phenomenon accomplished by a number of different processes. The active processes determine the final geometry of the bodies and, in some favourable cases, the inverse problem of deducing mechanisms can be undertaken by relying on the geometry of plutons. This is the case of the La Bazana granitic pluton, a small Variscan igneous body that intruded Cambrian rocks of the Ossa-Morena Zone (SW Iberian Massif) in the core of a large late upright antiform. The granite shows no appreciable solid-state deformation, but has a late magmatic foliation whose orientation, derived from field observations, defines a gentle dome. The regional attitude of the main foliation in the country rock (parallel to the axial plane of recumbent folds) is NW–SE, but just around the granite, it accommodates to the dome shape of the pluton. Flattening in the host rock on top of the granite is indicated by boudinaged and folded veins, and appears to be caused by an upward pushing of the magma during its emplacement. The dome-shaped foliation of the granite, geometrically and kinematically congruent with the flattening in the host rock, can be related in the same way to the upward pushing of the magma. The level of final emplacement was deduced from the mineral associations in the thermal aureole to be of 7–10 km in depth. Models of the gravity anomaly related to the granite body show that the granite has a teardrop–pipe shape enlarged at its top. Diapiric ascent of the magma through the lower middle crust is inferred until reaching a high viscous level, where final emplacement accompanied by lateral expansion and vertical flattening took place. This natural example suggests that diapirism may be a viable mechanism for migration and emplacement of magmas, at least up to 7–10 km in depth, and it provides natural evidence for theoretical discussion on the ability of magmatic diapirs to pierce the crust.     

The emplacement of the Late Miocene Monte Capanne intrusion (Elba Island,Central Italy): constraints from magnetic fabric analyses

Anisotropy of magnetic susceptibility (AMS) analysis has been carried out in the thermometamorphic aureole surrounding the Late Miocene Monte Capanne pluton (Elba Island, Central Italy). The identification and separation of the main carriers of the magnetic susceptibility by low-temperature and high-field AMS measurements demonstrate that a correct knowledge of the magnetic fabric is needed in order to use AMS for tectonic interpretations. Magnetic fabric data, combined with structural data from the aureole, and their comparison with data from the pluton itself, were used to constraint the mode of pluton emplacement. Results document an intimate linkage between the magmatic flow pattern and the syn-metamorphic fabrics acquired during pluton emplacement in the host rocks. The magnetic/structural fabric in the aureole rocks is dominated by flattening deformation and no systematic relationship with any regional tectonic feature is observed. These results suggest that local processes induced by magma ascent in the upper crust might have played a primary role in space generation for pluton emplacement in the Tuscan Magmatic Province, suggesting a revaluation of the modes of pluton emplacement during the post-orogenic evolution of the northern Apennine system as a whole.     

Multi-batch, incremental assembly of a dynamic magma chamber: the case of the Peninsula pluton granite (Cape Granite Suite, South Africa)

The S-type Peninsula Pluton (South Africa) exhibits substantial compositional variability and hosts a large variety of mafic and felsic magmatic enclaves with contrasting textures and compositions. Moreover, the pluton is characterized by mechanical concentrations of K-feldspar megacrysts, cordierite and biotite, generating a complex array of magmatic structures including schlieren, pipes, and spectacular sheeted structures. Chemical evidence indicates that the pluton is constructed incrementally by rapid emplacement of numerous magma pulses. Field, and textural data suggest that magmatic structures form by local flow at the emplacement level of highly viscous crystal-rich magmas (i.e. crystallinity up to 50?vol.%) through magma mushes assembled from older batches. At the time of arrival of relatively late magma batches, some areas within the pluton had achieved crystal fractions that allowed the material to act as a solid, whilst maintaining enough melt to prevent formation of sharp intrusional contacts. Magmatic structures represent “snapshots” of processes that operate in multiphase crystal-rich mushes and their genesis is due to mechanical and thermal instabilities in the crystal-rich magma chamber that are triggered by the emplacement of pulses of new magma derived from the melting of a compositionally variable metasedimentary source.     

The role of extensional tectonics at different crustal levels on granite ascent and emplacement: an example from Tuscany (Italy)

The role of regional extension on the rise and emplacement of granites in the crust is still debated. Pluton ascent and emplacement widely occurred in Tuscany (Italy) since late Miocene during the post-orogenic collapse of the inner Apennines, and are presently occurring in the geothermal areas of Amiata and Larderello. Tuscany offers a preferred test site to study the role of regional extension on pluton ascent and emplacement at different crustal levels. Ductile extension enhanced the segregation and ascent of granitic melts in the lower crust, controlling pluton emplacement in correspondence with the brittle–ductile transition. In the brittle crust, magma ascent occurred through subvertical faults and fractures compatible with the regional extension direction; pluton emplacement mainly occurred by means of roof lifting. The case of Tuscany suggests that the extensional structures enhance melt segregation and ascent in the ductile crust, but are not efficient alone to provide a pathway for the ascent of granitic magmas in the brittle-extending crust. The estimated magmatic strain rates due to pluton emplacement in the geothermal areas are much larger than the regional tectonic strain rates. This suggests that regional tectonics did not control magma emplacement in the brittle crust and explains why nontectonic processes (roof lifting) accommodated the space required for pluton emplacement.     

Granitoid emplacement during syn-convergent transtension:An example from the Huamenlou pluton in North Qinling,central China

The Huamenlou pluton,is an elongated granite intrusion with high aspect ratio,emplaced within the southern margin of the North Qinling(central China).Here we investigate this pluton through multiple techniques including the fabric study,microstructural observation and zircon geochronology.Our zircon U-Pb data confirm that the granite crystallized at ca.462 Ma which is consistent with the ages of other linear plutons in North Qinling.Microstructural observations of the Huamenlou granites illustrate that the pluton has undergone superimposed deformation during its emplacement,from magmatic to hightemperature solid state conditions.The internal fabric obtained by anisotropy of magnetic susceptibility(AMS)and shape preferred orientation(SPO)show similar results.The fabrics are relatively concordant and generally vary from NE-SW to NEE-SWW which are roughly oblique to the trend of the pluton elongation and the regional structures.Meanwhile,scalar parameters reflect two completely different strain regimes for the pluton and its host rocks,i.e.,the fabrics within host rocks are mainly oblate while the central part of the intrusion displays mainly prolate fabrics.It is inferred that the structural pattern recorded in this pluton was caused by local dextral transtension in consequence of oblique convergence between the South and North China Blocks.We propose that the local transtension in convergence setting probably evolved from vertical extrusion tectonics that provided room for the magma emplacement and imparted prolate fabrics in the Huamenlou pluton.     

南秦岭晚三叠世胭脂坝岩体的磁组构特征及意义

胭脂坝岩体是秦岭造山带内具典型代表性意义的晚三叠世花岗岩,已有的年代学和地球化学研究对岩体的侵位机制有着不同的认识。采用磁组构方法研究了该岩体的内部组构特征,并结合区域构造探讨了岩体的侵位机制。结果显示,胭脂坝岩体51个采点、348个样品的平均体积磁化率（K_m）值普遍小于100 μSI,总体较低。磁滞回线和热磁曲线特征表明,岩体磁组构主要由顺磁性矿物控制。大部分样品的校正磁化率各向异性度（P_J）值小于1.10,平均为1.06,表现出低各向异性度的总体特征。样品磁化率椭球形态参数（T）值多大于0,磁化率椭球体以压扁椭球为主。综合分析认为,岩体的磁组构是典型的岩浆组构,记录了岩浆侵位的流动构造。岩体磁组构以东西向中低角度倾伏的磁线理和南北向倾伏的磁面理为总体特征,磁线、面理轨迹揭示出岩浆自西向东的侵位流动。这样的岩浆侵位过程应与中、浅部地壳的走滑挤压构造相关,岩体侵位时造山带处于同碰撞构造环境。     

望云山复式花岗岩体磁性组构特征及其动力学意义

为了分析望云山复式花岗岩体侵位时的动力学状态，对该岩体进行了岩石磁组构参数测定，磁化率的变化特征反映了望云山得式岩体侵位过程中构造环境的变化和单元岩石的暗色矿物组成及其性程度的高低；磁面理的产状与岩体形态和岩石单元分布相吻合，清晰地反映了不同构造单元岩浆侵位方式；磁线理指示岩体的侵位中心，线理表现形式不一，标示侵位方式与受构造应力的不同；晚期岩浆对早期岩浆中的磁线理有一定的改造作用，磁线理方向基本上反映了岩浆原始流动状态；从磁化率椭球参数可以看出岩浆侵位的应变状态；岩浆应力场分布体现了岩浆侵位方式及其所处构造环境，岩体岩石磁组构参数佐证了区域构造,围岩构造及岩体内部其他构造所反映的岩体侵位机制。     

Structural,AMS and geochronological study of a laccolith emplaced during Late Variscan orogenic extension: the Rocles pluton (SE French Massif Central)

In the southern French Massif Central, the Rocles leucogranite of Variscan age consists of three petrographic facies; textural analysis shows that they experienced the same subsolidus deformation. New chemical U-Th-Pb dating on monazite yielded 324 ± 4 Ma and 325 ± 5 Ma ages for muscovite-rich and biotite-rich facies respectively. AMS-study results agree with petrostructural observations. The magnetic planar and linear fabrics, which correspond to the preferred orientation of biotite and muscovite, are consistent with the foliation and lineation defined by the preferred mineral orientation. This fabric developed during pluton emplacement. The accordance of this granite foliation with that observed in the host rock, suggests that the Rocles pluton is a laccolith, but its present geometry resulted from post-emplacement southward tilting due to the uplift of the Late Carboniferous Velay dome. Restoration of the primary geometry of the pluton and its country-rocks to a flat-lying attitude places the granite lineation close to the trend measured in other plutons of the area. This restoration further supports the interpretation of the Rocles laccolith as a pluton emplaced along a tectonic contact reactivated during the late-orogenic collapse of the Variscan Belt.     

Magmatic history and geophysical signature of a post-collisional intrusive center emplaced near a crustal-scale shear zone: the Plechý granite pluton (Moldanubian batholith,Bohemian Massif)

The Plechy pluton, southwestern Bohemian Massif, represents a late-Variscan, complexly zoned intrusive center emplaced near the crustal-scale Pfahl shear zone; the pluton thus provides an opportunity to examine the interplay among successive emplacement of large magma batches, magmatic fabric acquisition, and the late-Variscan stress field associated with strike-slip shearing. The magmatic history of the pluton started with the emplacement of the porphyritic Plechy and Haidmühler granites. Based on gravity and structural data, we interpret that the Plechy and Haidmühler granites were emplaced as a deeply rooted, ∼NE–SW elongated body; its gross shape and internal fabric (steep ∼NE–SW magmatic foliation) may have been controlled by the late-Variscan stress field. The steep magmatic foliation changes into flat-lying foliation (particularly recorded by AMS) presumably as a result of divergent flow. Magnetic lineations correspond to a sub-horizontal ∼NE–SW finite stretch associated with the divergent flow. Subsequently, the Třístoličník granite, characterized by steep margin-parallel magmatic foliation, was emplaced as a crescent-shaped body in the central part of the pluton. The otherwise inward-younging intrusive sequence was completed by the emplacement of the outermost and the most evolved garnet-bearing granite (the Marginal granite) along the southeastern margin of the pluton. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Magnetic Fabric of Cuizhao Pluton and Its Emplacement Significance

1NTRODUCTlONAcloseassociationbetweenthemagneticfabricsofrocksamplesandfieldmicro-structurehasbeenknownbyGraham(l954)andthemagneticsusceptibi1itymethodforstructuralstudieshasbeenusedcommonly(TikoffandTeyssier,l9941Rochetteetal.,1992jYuandZheng,l992;Hrouda,l982).Themagneticfabricsandcomparativepetrofabricstudiesofmanyrockshavebeenexaminedundergoing.Furthermore,thefieldandexperimentsstudiesshowedthat,undercertainconditions,themagneticsusceptibilityanisotropyandfinitestrainarecorrelated,soth…     

华北晚前寒武纪镁铁质岩墙群的流动构造及侵位机制

华北克拉通中部广泛发育晚前寒武纪镁铁质岩墙群。这些岩墙群未变形和未变质,保存了清晰完好的流动构造,完整地反映了前寒武纪岩浆活动的特征和流动构造,这在世界上是罕见的。通过对晚前寒武纪镁铁质岩墙群的形态和流动构造研究,如:流动线理、矿物组构和磁组构等,提出岩墙群的侵位方向和侵位方式。结合本区岩墙群与燕辽—中条拗拉槽系的关系以及岩墙群的力学性质,探讨本区岩墙群的侵位机制。     

Magnetic fabrics and their relationship with the emplacement of the Piracaia pluton,SE Brazil

Magnetic fabric and rock-magnetism studies were performed on the four units of the 578 ± 3-Ma-old Piracaia pluton (NW of São Paulo State, southern Brazil). This intrusion is roughly elliptical (~32 km²), composed of (i) coarse-grained monzodiorite (MZD-c), (ii) fine-grained monzodiorite (MZD-f), which is predominant in the pluton, (iii) monzonite heterogeneous (MZN-het), and (iv) quartz syenite (Qz-Sy). Magnetic fabrics were determined by applying both anisotropy of low-field magnetic susceptibility (AMS) and anisotropy of anhysteretic remanent magnetization (AARM). The two fabrics are coaxial. The parallelism between AMS and AARM tensors excludes the presence of a single domain (SD) effect on the AMS fabric of the units. Several rock-magnetism experiments performed in one specimen from each sampled units show that for all of them, the magnetic susceptibility and magnetic fabrics are carried by magnetite grains, which was also observed in the thin sections. Foliations and lineations in the units were successfully determined by applying magnetic methods. Most of the magnetic foliations are steeply dipping or vertical in all units and are roughly parallel to the foliation measured in the field and in the country rocks. In contrast, the magnetic lineations present mostly low plunges for the whole pluton. However, for eight sites, they are steep up to vertical. Thin-section analyses show that rocks from the Piracaia pluton were affected by the regional strain during and after emplacement since magmatic foliation evolves to solid-state fabric in the north of the pluton, indicating that magnetic fabrics in this area of the pluton are related to this strain. Otherwise, the lack of solid-state deformation at outcrop scale and in thin sections precludes deformation in the SW of the pluton. This evidence allows us to interpret the observed magnetic fabrics as primary in origin (magmatic) acquired when the rocks were solidified as a result of magma flow, in which steeply plunging magnetic lineation suggests that a feeder zone could underlie this area.     

Multi-stage emplacement of the G?temar Pluton, SE Sweden: new evidence inferred from field observations and microfabric analysis, including cathodoluminescence microscopy

The emplacement of the Mesoproterozoic G?temar Pluton into Paleoproterozoic granitoid host rocks of the Transscandinavian Igneous Belt is re-examined by microfabric analysis, including cathodoluminescence microscopy. Field data on the pluton-host rock system are used to strengthen the model. The G?temar Pluton, situated on the Baltic Shield of SE Sweden, is a horizontally zoned tabular structure that was constructed by the intrusion of successive pulses of magma with different crystal/melt ratios, at an estimated crustal depth of 4–8?km. Initial pluton formation involved magma ascent along a vertical dike, which was arrested at a mechanical discontinuity within the granitoid host rocks; this led to the formation of an initial sill. Subsequent sill stacking and their constant inflation resulted in deformation and reheating of existing magma bodies, which also raised the pluton roof. This multi-stage emplacement scenario is indicated by complex dike relationships and the occurrence of several generations of quartz (Si-metasomatism). The sills were charged by different domains of a heterogeneous magma chamber with varying crystal/melt ratios. Ascent or emplacement of magma with a high crystal/melt ratio is indicated by syn-magmatic deformation of phenocrysts. Complex crystallization fabrics (e.g. oscillatory growth zoning caused by high crystal defect density, overgrowth and replacement features, resorbed and corroded crystal cores, rapakivi structure) are mostly related to processes within the main chamber, that is repeated magma mixing or water influx.     

Igneous banding, schlieren and mafic enclaves in calc-alkaline granites: The Budduso pluton (Sardinia)

This study deals with the origin of igneous layering in plutons, and, especially, the extent layering is related to mafic–silicic magma interactions. The Budduso pluton (Sardinia) shows three main scales of organization.(i) Large scale lithological variations correspond to three main magmatic units, with differentiation increasing from the Outer (hornblende-bearing biotite granodiorite/monzogranite) to the Middle (biotite monzogranite) and the Inner (leucomonzogranite) units. The striking homogeneity of ⁸⁷Sr/⁸⁶Sr initial ratios (0.7090 ± 4) and ε_Nd(t) values (− 5.6 ± 0.1) strongly suggests that magma isotopic equilibration was achieved prior to emplacement, whereas mixing/mingling structures observed within the pluton reflect second-stage processes involving broadly cogenetic components.(ii) Metre to decametre-scale igneous layering may be isomodal or modally-graded, locally with cross-layering. Biotite and plagioclase compositions are similar in both biotite-rich and quartzofeldspathic layers, as are the trace-element patterns which differ only by relative abundances. This precludes an origin by fractional crystallization. A penetrative submagmatic fabric superimposed on the layering and corresponding mainly to flattening can be ascribed to interference between pluton growth and regional deformation.(iii) Composite layering and schlieren are commonly associated to mafic microgranular enclaves, locally within synmagmatic shear zones or disrupted synplutonic dykes. In that case, there is a progressive shift in biotite X_Fe values from the core of enclave ( 0.65) to the host monzogranite ( 0.72): schlieren in the monzogranite show biotite X_Fe values similar to that of the host rock, whereas schlieren close to mafic enclaves show lower X_Fe values ( 0.69) towards those of enclave rims.These features can be ascribed to three main processes: (i) assembly of differentiated (± mixed/mingled) magmatic pulses; (ii) local hydrodynamic sorting related to density currents in a mush, and segregation of residual melt; (iii) mechanical disruption and chemical hybridization of mafic magmas during ascent or within the pluton related to magma dynamics. None of these processes affect the whole pluton but they are limited to specific magmatic units. Therefore, pluton growth by incremental assembly of magma batches is not incompatible with magma chamber processes.