A CCD‐based guiding and control system for solar telescopes

We describe a system for guiding and control of motion of solar telescopes based on a determination of the position of the full solar disk on a CCD chip. The system computes the position of the disk center and, according to the difference between the instantaneous and required positions, it controls the motion of the telescope to compensate the deviation. The instantaneous position of the disk center is the basic input for the telescope's guiding and coordinate system. Brightness inhomogeneities of the solar limb caused by clouds are checked in real time. The function of the system can be suspended automatically if the clouds degrade the accuracy of guiding. The system also makes possible to check the correct focus and to evaluate the image quality.     

A Review of Daytime Atmospheric Optical Turbulence Profile Detection Technology

Atmospheric turbulence has been confirmed as the primary source affecting the quality of ground-based telescope image. To reduce the effect of atmosphere, a good site should be selected, and adaptive optics (AO) should be installed for the telescope. In general, the daytime atmospheric turbulence is more intense than that at night under the effect of solar radiation. Numerous solar telescopes have built AO systems worldwide. Conventional AO is only capable of improving the image quality in a small field of view, whereas it cannot satisfy the needs of a large field of view. The novel wide field adaptive optical system is capable of achieving a large field of view and high-resolution images, whereas the atmospheric turbulence profile should be accurately detected, which is the prerequisite and key parameter of the novel AO system. Moreover, the astronomical high-resolution technology in accordance with the turbulence imaging theory requires more detailed detection of turbulence. Accordingly, a brief review about the latest detection technology of the daytime optical turbulence profile is valuable for astronomical observations. Besides, the parameters of atmospheric turbulence are briefly introduced. Subsequently, SNODAR, SHABAR, MOSP, DIMM+, A-MASP, and other detection technologies of the stratified atmospheric turbulence for daytime are primarily presented, and the advantages and disadvantages of the different technologies are summarized.     

History of solar telescopes

Solar observations have been done with telescopes since their invention—already Galileo looked at the Sun. Despite the Sun’s unusual brightness, telescopes which specialize in solar observations are fairly recent, dating from the late nineteenth century onwards. Today, many solar telescopes have rather little in common with nighttime telescopes. They are adapted to high light flux, a limited range of declination, and to the specifications of solar spectrographs and polarimeters. This paper presents the history of the modern optical solar telescope on the ground and in space, the accompanying evolution of scientific capabilities, and a brief outlook into the future.     

Scaling-laws of Radio Spike Bursts and Their Constraints on New Solar Radio Telescopestwo

Radio observation is one of important methods in solar physics and space science. Sometimes, it is almost the sole approach to observe the physical processes such as the acceleration, emission, and propagation of non-thermal energetic particles, etc. So far, more than 100 solar radio telescopes have been built in the world, including solar radiometers, dynamic spectrometers, and radioheliographs. Some of them have been closed after the fulfillment of their primary scientific objectives, or for their malfunctions, and thus replaced by other advanced instruments. At the same time, based on some new technologies and scientific ideas, various kinds of new and much more complicated solar radio telescopes are being constructed by solar radio astronomers and space scientists, such as the American E-OVSA and the solar radio observing system under the framework of Chinese Meridian Project II, etc. When we plan to develop a new solar radio telescope, it is crucial to design the most suitable technical parameters, e.g., the observing frequency range and bandwidth, temporal resolution, frequency resolution, spatial resolution, polarization degree, and dynamic range. Then, how do we select a rational set of these parameters? The long-term observation and study revealed that a large strong solar radio burst is frequently composed of a series of small bursts with different time scales. Among them, the radio spike burst is the smallest one with the shortest lifetime, the narrowest bandwidth, and the smallest source region. Solar radio spikes are considered to be related to a single magnetic energy release process, and can be regarded as an elementary burst in solar flares. It is a basic requirement for the new solar radio telescope to observe and discriminate these solar radio spike bursts, even though the temporal and spatial scales of radio spike bursts actually vary with the observing frequency. This paper presents the scaling laws of the lifetime and bandwidth of solar radio spike bursts with respect to the observing frequency, which provide some constraints for the new solar radio telescopes, and help us to select the rational telescope parameters. Besides, we propose a spectrum-image combination mode as the best observation mode for the next-generation solar radio telescopes with high temporal, spectral, and spatial resolutions, which may have an important significance for revealing the physical essence of the various non-thermal processes in violent solar eruptions.     

A High-Resolution Solar Telescope Using Dark-Lens Diffractive Optics

A telescope based upon dark-lens diffractive optics would be a uniquely new instrument for solar astronomy. The image formation process in such a telescope gives an intrinsically higher resolving power and a greatly reduced image intensity compared to that of refracting or reflecting optical systems of similar lens dimension. This low image intensity would be an advantage for solar observations made using a very large imaging element. After a brief overview of the history of solar instrument development, a quantitative evaluation of the dark-lens diffracting solar telescope concept is presented, showing the potential of this imaging method to meet or even to exceed the most demanding resolution goals currently being considered for future space-borne solar telescopes.     

Fast guiding and small telescopes in the 8-m era

Fast guiding may improve the images delivered by telescopes. It may be implemented fairly cheaply and offers an upgrade path to smaller telescopes, which will make them more useful in the 8-m era. However, the detailed performance of a fast guiding system must depend on many parameters and this makes it difficult to assess its precise scientific benefits. This paper provides a comprehensive mathematical framework for calculating the performance of fast guiding systems. A range of models has been calculated that illustrates the benefits for telescopes of various sizes in various wavelength ranges. Three measures of performance have been examined: FWHM, 50 per cent encircled energy diameter and energy concentration in a 0.35-arcsec aperture. Typical gains over natural seeing are found to be in the 20 to 40 per cent range at useful levels of sky coverage. Other things being equal, small telescopes do not benefit as much as large ones from fast guiding. The sensitivity of these benefits to assumptions has also been examined, and this highlights the need to operate in the correct wavelength range for the aperture in question. The largest perturbations to ideal models are likely to be the result of telescope windshake and the outer scale of turbulence. If there is appreciable windshake, fast guiding will yield larger benefits than expected from the natural seeing. A short outer scale (a few hundred metres) will, however, lose most of the gains.     

The 1.5 meter solar telescope GREGOR

The 1.5 m telescope GREGOR opens a new window to the understanding of solar small‐scale magnetism. The first light instrumentation includes the Gregor Fabry Pérot Interferometer (GFPI), a filter spectro‐polarimeter for the visible wavelength range, the GRating Infrared Spectro‐polarimeter (GRIS) and the Broad‐Band Imager (BBI). The excellent performance of the first two instruments has already been demonstrated at the Vacuum Tower Telescope. GREGOR is Europe’s largest solar telescope and number 3 in the world. Its all‐reflective Gregory design provides a large wavelength coverage from the near UV up to at least 5 microns. The field of view has a diameter of 150″. GREGOR is equipped with a high‐order adaptive optics system, with a subaperture size of 10 cm, and a deformable mirror with 256 actuators. The science goals are focused on, but not limited to, solar magnetism. GREGOR allows us to measure the emergence and disappearance of magnetic flux at the solar surface at spatial scales well below 100 km. Thanks to its spectro‐polarimetric capabilities, GREGOR will measure the interaction between the plasma flows, different kinds of waves, and the magnetic field. This will foster our understanding of the processes that heat the chromosphere and the outer layers of the solar atmosphere. Observations of the surface magnetic field at very small spatial scales will shed light on the variability of the solar brightness (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

观测天体光谱的纤维光学方法及2.16m望远镜实用系统

本文描述了近年来广泛发展起来的天体物理实测技术中的一项重要进展——纤维光学分光技术方法在天体光谱观测中的应用及2.16m望远镜实用系统的特点和初步应用结果     

YNST光电导行镜机械设计

YNST(云南1m太阳望远镜)光电导行系统的作用除了获取足够清晰的太阳像用作光电导行外,还参与望远镜光轴的校正.介绍了YNST光电导行镜的光学要求、机械设计结果及镜体设计所采用的被动无热化技术.校核了导行镜在阳光辐照下的热变形,计算了导行镜镜筒的最大弯沉,结果表明,所采用的无热化设计是有效的,导行镜刚度满足导行系统要求...     

射电天文中焦面阵或多波束馈源的应用

焦面阵技术或者多波束馈源系统已经日益广泛地应用于现代射电望远镜，因为它可以充分地利用同一射电望远镜反射面所能提供的信息，在观测比射电望远镜方向瓣大得多的展源时数倍乃至数十倍地提高观测的速度；当存在大气层或电离层的起伏或不均匀影响观测成像质量时，可消除这种影响，提高观测质量；利用焦面阵各单个馈源接收到的信息的互相关，则可以实时监控射电望远镜的反射面、二次反射面、指向精度，从而降低地面上大射电望远镜或空间射电望远镜的精度要求和造价。目前焦面阵已经愈来愈广泛地配置在毫米波射电望远镜和大型射电望远镜的主要波段。对此作了一个较新和全面的评述，对焦面阵应用中的限制，包括相位误差的限制和性能价格比的考虑和可能的前景作了简要的介绍。还分析了在计划中的大型主动球反射面射电望远镜（即FAST）上，配置焦面阵的相应限制、问题和难点，提出了初步的建议，并给出经中英双方讨论后初步拟定的FAST频段、波束及低噪声放大器的配置。     

Correcting for the solar wind in pulsar timing observations: the role of simultaneous and low-frequency observations

The primary goal of pulsar timing array projects is to detect ultra-low-frequency gravitational waves. Pulsar data sets are affected by numerous noise processes including varying dispersive delays in the interstellar medium and from the solar wind. The solar wind can lead to rapidly changing variations that, with existing telescopes, can be hard to measure and then remove. In this paper we study the possibility of using a low frequency telescope to aid in such correction for the Parkes Pulsar Timing Array(PPTA) and also discuss whether the ultra-wide-bandwidth receiver for the FAST telescope is sufficient to model solar wind variations. Our key result is that a single wide-bandwidth receiver can be used to model and remove the effect of the solar wind. However, for pulsars that pass close to the Sun such as PSR J1022+1022, the solar wind is so variable that observations at two telescopes separated by a day are insufficient to correct the solar wind effect.     

Mechanical design of the solar telescope GREGOR

The mechanical structure of the GREGOR telescope was installed at the Observatorio del Teide, Tenerife, in 2004. New concepts for mounting and cooling of the 1.5‐meter primary mirror were introduced. GREGOR is an open telescope, therefore the dome is completely open during observations to allow for air flushing through the open, but stiff telescope structure. Backside cooling system of the primary mirror keeps the mirror surface close to ambient temperature to prevent mirror seeing. The large collecting area of the primary mirror results in high energy density at the field stop at the prime focus of the primary which needs to be removed. The optical elements are supported by precision alignment systems and should provide a stable solar image at the optical lab. The coudé train can be evacuated and serves as a natural barrier between the outer environmental conditions and the air‐conditioned optical laboratory with its sensitive scientific instrumentation. The telescope was successfully commissioned and will start its nominal operation during 2013 (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Three types of 2-degree field compensating atmospheric dispersion correctors for prime focus

Three types of prime focus correctors for Chinese 2.16m telescope are introduced in this paper. Each corrector has a 2 degree field and can be used to compensate the atmospheric dispersion of 6″. All the three correctors have excellent image quality and the angles between the principal rays and the optical axes are quite small. There is no special technological difficulty in their fabrication. These designs can not only be used in the 2.16m telescope but also be applied to other large telescopes.     

Open Principle for Large High-Resolution Solar Telescopes

Vacuum solar telescopes solve the problem of image deterioration inside the telescope due to refractive index fluctuations of the air heated by the solar light. However, such telescopes have a practical diameter limit somewhat over 1 m. The Dutch Open Telescope (DOT) was the pioneering demonstrator of the open-telescope technology without need of vacuum, now pursued in the German GREGOR. Important ingredients for this technology are primary beam completely open to natural wind flow, stiff but still open design by principal stiff overall geometries in combination with carefully designed joints and completely open-foldable dome constructions based on tensioned strong cloth. Further developments to large sizes are made within the framework of the design study for a European Solar Telescope (EST).     

Active sub-reflector research for a large radio telescope

This paper proposes an active sub-reflector suitable for large radio telescopes, which can compensate both of the deformation of the main reflector and sub-reflector position offsets. The mathematical formula of the main reflector deformation compensated by the sub-reflector is deduced based on Cassegrain and Gregory antenna structures. The position of the sub-reflector is adjustable to compensate for defocusing errors on high and low elevations, which are mainly caused by the deformation of the sub-reflector supporting legs. In this paper, the method of obtaining the optimum position of the sub-reflector from the aperture phase by the interferometric method is introduced. The actual measurement is verified on the Tianma 65 m radio telescope, which provides a new way to diagnose the position error of the sub-reflector.     

Super resolution for astronomical observations

In order to obtain detailed information from multiple telescope observations a general blind super-resolution (SR) reconstruction approach for astronomical images is proposed in this paper. A pixel-reliability-based SR reconstruction algorithm is described and implemented, where the developed process incorporates flat field correction, automatic star searching and centering, iterative star matching, and sub-pixel image registration. Images captured by the 1-m telescope at Yunnan Observatory are used to test the proposed technique. The results of these experiments indicate that, following SR reconstruction, faint stars are more distinct, bright stars have sharper profiles, and the backgrounds have higher details; thus these results benefit from the high-precision star centering and image registration provided by the developed method. Application of the proposed approach not only provides more opportunities for new discoveries from astronomical image sequences, but will also contribute to enhancing the capabilities of most spatial or ground-based telescopes.     

The new IRSOL solar telescope control system

We would like to present a new control system for the solar telescope now in operation at the Swiss institute, Istituto Ricerche Solari Locarno (IRSOL). The control software is multi‐client capable, and optionally uses the primary image of the sun projected on a position sensor or the axis encoder for guiding. The hardware and software consist of three completely separate levels, which communicate with each other via ASCII commands. We shall describe the general principles implemented in the course of the development. We consider it important that this text is also applicable to other astronomical device controls. Therefore we explain our specific solution next to general principles (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Observations of Solar EUV Radiation with the CORONAS-F/SPIRIT and SOHO/EIT Instruments

The SPIRIT complex onboard the CORONAS-F satellite has routinely imaged the Sun in the 171, 175, 195, 284, and 304 Å spectral bands since August 2001. The complex incorporates two telescopes. The Ritchey-Chretien telescope operates in the 171, 195, 284, and 304 Å bands and has an objective similar to that of the SOHO/EIT instrument. The Herschel telescope obtains solar images synchronously in the 175 and 304 Å bands with two multilayer-coated parabolic mirrors. The SPIRIT program includes synoptic observations, studies of the dynamics of various structures on the solar disk and in the corona up to 5 solar radii, and coordinated observations with other spaceborne and ground-based telescopes. In particular, in the period 2002–2003, synoptic observations with the SPIRIT Ritchey-Chretien telescope were coordinated with regular 6-hour SOHO/EIT observations. Since June 2003, when EIT data were temporarily absent (SOHO keyholes), the SPIRIT telescope has performed synoptic observations at a wavelength of 175 A. These data were used by the Solar Influence Data Analysis Center (SIDC) at the Royal Observatory of Belgium for an early space weather forecast. We analyze the photometric and spectral parameters of the SPIRIT and EIT instruments and compare the integrated (over the solar disk) EUV fluxes using solar images obtained with these instruments during the CORONAS-F flight from August 2001 through December 2003.     

Wide-field tracking with zenith-pointing telescopes

Equipped with a suitable optical relay system, telescopes employing low-cost fixed primary mirrors could point and track while delivering high-quality images to a fixed location. Such an optical tracking system would enable liquid-mirror telescopes to access a large area of sky and employ infrared detectors and adaptive optics. Such telescopes could also form the elements of an array in which light is combined either incoherently or interferometrically. Tracking of an extended field requires correction of all aberrations including distortion, field curvature and tilt. A specific design is developed that allows a 10-m liquid-mirror telescope to track objects for as long as 30 min and to point as far as 4° from the zenith, delivering a distortion-free diffraction-limited image to a stationary detector, spectrograph or interferometric beam combiner.     

Monte Carlo studies of medium-size telescope designs for the Cherenkov Telescope Array

We present studies for optimizing the next generation of ground-based imaging atmospheric Cherenkov telescopes (IACTs). Results focus on mid-sized telescopes (MSTs) for CTA, detecting very high energy gamma rays in the energy range from a few hundred GeV to a few tens of TeV. We describe a novel, flexible detector Monte Carlo package, FAST (FAst Simulation for imaging air cherenkov Telescopes), that we use to simulate different array and telescope designs. The simulation is somewhat simplified to allow for efficient exploration over a large telescope design parameter space. We investigate a wide range of telescope performance parameters including optical resolution, camera pixel size, and light collection area. In order to ensure a comparison of the arrays at their maximum sensitivity, we analyze the simulations with the most sensitive techniques used in the field, such as maximum likelihood template reconstruction and boosted decision trees for background rejection. Choosing telescope design parameters representative of the proposed Davies–Cotton (DC) and Schwarzchild–Couder (SC) MST designs, we compare the performance of the arrays by examining the gamma-ray angular resolution and differential point-source sensitivity. We further investigate the array performance under a wide range of conditions, determining the impact of the number of telescopes, telescope separation, night sky background, and geomagnetic field. We find a 30–40% improvement in the gamma-ray angular resolution at all energies when comparing arrays with an equal number of SC and DC telescopes, significantly enhancing point-source sensitivity in the MST energy range. We attribute the increase in point-source sensitivity to the improved optical point-spread function and smaller pixel size of the SC telescope design.