青藏高原狮泉河-拉果错-永珠-嘉黎蛇绿混杂岩带时空结构与构造演化

青藏高原中部狮泉河-拉果错-永珠-嘉黎蛇绿混杂岩带（简称SYMZ）位于班公湖-怒江缝合带与雅鲁藏布江缝合带之间,其构造属性存在很大争议,制约了对青藏高原多岛弧盆系构造演化的理解.根据新的地质调查资料、研究成果并结合分析数据,系统总结了该蛇绿混杂岩带的地质特征,讨论了其构造演化过程.一系列新资料及新认识表明SYMZ是分割北拉萨地块和中拉萨地块的一条独立的蛇绿混杂岩带,是特提斯构造域多岛弧盆系的组成部分.在狮泉河、拉果错、阿索、永珠、凯蒙等地发育比较典型的蛇绿岩组合,高精度年代学数据指示洋盆主体发育于178~160 Ma,比班公湖-怒江洋盆主体发育时限（188~162 Ma）要晚10 Ma左右,阿索一带蛇绿岩残片记录洋盆一直持续到113 Ma.SYMZ侏罗纪基性岩具有MORB型（洋中脊玄武岩）和IAT型（岛弧拉斑玄武岩）火山岩的地球化学性质,属于洋内弧型和洋中脊型蛇绿混杂岩;早白垩世基性岩具MORB和火山弧玄武岩的双重特性,指示其很可能形成于SSZ的构造环境,不同于同时期班公湖-怒江特提斯受地幔柱热点影响的洋盆性质.同时,在拉果错、永珠、凯蒙等地区识别出侏罗纪前弧玻安岩及玻玄岩系列,一致指示SYMZ洋壳发生过洋内俯冲.在此基础上,结合区域地质资料,构建了SYMZ特提斯洋的时空格架及构造演化历史,认为经历了晚三叠世-早侏罗世洋盆裂解-扩张、中-晚侏罗世洋内俯冲、早白垩世俯冲消减和早白垩世末期洋盆消亡四个阶段,为特提斯洋的构造演化及大地构造过程再造提供了重要的地质学证据.      

Nature and evolution of the Neo-Tethys in central Tibet: synthesis of ophiolitic petrology,geochemistry, and geochronology

In this paper, we summarize results of studies on ophiolitic mélanges of the Bangong–Nujiang suture zone (BNSZ) and the Shiquanhe–Yongzhu–Jiali ophiolitic mélange belt (SYJMB) in central Tibet, and use these insights to constrain the nature and evolution of the Neo-Tethys oceanic basin in this region. The BNSZ is characterized by late Permian–Early Cretaceous ophiolitic fragments associated with thick sequences of Middle Triassic–Middle Jurassic flysch sediments. The BNSZ peridotites are similar to residual mantle related to mid-ocean-ridge basalts (MORBs) where the mantle was subsequently modified by interactions with the melt. The mafic rocks exhibit the mixing of various components, and the end-members range from MORB-types to island-arc tholeiites and ocean island basalts. The BNSZ ophiolites probably represent the main oceanic basin of the Neo-Tethys in central Tibet. The SYJMB ophiolitic sequences date from the Late Triassic to the Early Cretaceous, and they are dismembered and in fault contact with pre-Ordovician, Permian, and Jurassic–Early Cretaceous blocks. Geochemical and stratigraphic data are consistent with an origin in a short-lived intra-oceanic back-arc basin. The Neo-Tethys Ocean in central Tibet opened in the late Permian and widened during the Triassic. Southwards subduction started in the Late Triassic in the east and propagated westwards during the Jurassic. A short-lived back-arc basin developed in the middle and western parts of the oceanic basin from the Middle Jurassic to the Early Cretaceous. After the late Early Jurassic, the middle and western parts of the oceanic basin were subducted beneath the Southern Qiangtang terrane, separating the Nierong microcontinent from the Southern Qiangtang terrane. The closing of the Neo-Tethys Basin began in the east during the Early Jurassic and ended in the west during the early Late Cretaceous.     

Evidence for Neotethys rooted within the Vardar suture zone from the Voras Massif, northernmost Greece

Three conflicting models are currently proposed for the location and tectonic setting of the Eurasian continental margin and adjacent Tethys ocean in the Balkan region during Mesozoic–Early Tertiary time. Model 1 places the Eurasian margin within the Rhodope zone relatively close to the Moesian platform. A Tethyan oceanic basin was located to the south bordering a large “Serbo-Pelagonian” microcontinent. Model 2 correlates an integral “Serbo-Pelagonian” continental unit with the Eurasian margin and locates the Tethys further southwest. Model 3 envisages the Pelagonian zone and the Serbo-Macedonian zone as conjugate continental units separated by a Tethyan ocean that was sutured in Early Tertiary time to create the Vardar zone of northern Greece and former Yugoslavia. These published alternatives are tested in this paper based on a study of the tectono-stratigraphy of a completely exposed transect located in the Voras Mountains of northernmost Greece. The outcrop extends across the Vardar zone, from the Pelagonian zone in the west to the Serbo-Macedonian zone in the east.Within the Voras Massif, six east-dipping imbricate thrust sheets are recognised. Of these, Units 1–4 correlate with the regional Pelagonian zone in the west (and related Almopias sub-zone). By contrast, Units 5–6 show a contrasting tectono-stratigraphy and correlate with the Paikon Massif and the Serbo-Macedonian zone to the east. These units form a stack of thrust sheets, with Unit 1 at the base and Unit 6 at the top. Unstacking these thrust sheets places ophiolitic units between the Pelagonian zone and the Serbo-Macedonian zone, as in Model 3. Additional implications are, first, that the Paikon Massif cannot be seen as a window of Pelagonian basement, as in Model 1, and, secondly, Jurassic andesitic volcanics of the Paikon Massif locally preserve a gneissose continental basement, ruling out a recently suggested origin as an intra-oceanic arc.We envisage that the Almopias (Vardar) ocean rifted in Triassic time, followed by seafloor spreading. The Almopias ocean was consumed beneath the Serbo-Macedonian margin in Jurassic time, generating subduction-related arc volcanism in the Paikon Massif and related units. Ophiolites were emplaced onto the Pelagonian margin in the west and covered by Late Jurassic (pre-Kimmeridgian) conglomerates. Other ophiolitic rocks formed within the Vardar zone (Ano Garefi ophiolite, Unit 4) in latest Jurassic–Early Cretaceous time and were not deformed until Early Tertiary time. The Vardar zone finally sutured in the Early Tertiary creating the present imbricate thrust structure of the Voras Mountains.     

Uppermost Cretaceous–Lower Tertiary Ulukışla Basin,south-central Turkey: sedimentary evolution of part of a unified basin complex within an evolving Neotethyan suture zone

The Ulukışla Basin, the southerly and best exposed of the Lower Tertiary Central Anatolian Basins, sheds light on one of the outstanding problems of the tectonic assembly of suture zones: how large deep-water basins can form within a zone of regional plate convergence. The oldest Ulukışla Basin sediments, of Maastrichtian age, transgressively overlie mélange and ophiolitic rocks that were emplaced southwards onto the Tauride microcontinent during the latest Cretaceous time. The Niğde-Kirşehir Massif forming the northern basin margin probably represents another rifted continental fragment that was surrounded by oceanic crust during Mesozoic time. The stratigraphic succession of the Ulukışla Basin begins with the deposition of shallow-marine carbonates of Maastrichtian–Early Palaeocene age, then passes upwards into slope-facies carbonates, with localised sedimentary breccias and channelised units, followed by deep-water clastic turbidites of Middle Palaeocene–Early Eocene age. This was followed by the extrusion of c. 2000 m of basic volcanic rocks during Early to Mid Eocene time. After volcanism ended, coral-bearing neritic carbonates and nummulitic shelf sediments accumulated along the northern and southern margins of the basin, respectively. Deposition of the Ulukışla Basin ended with gypsum deposits including turbidites, debris flows, and sabkhas, followed by a regional Oligocene unconformity.The Ulukışla Basin is interpreted as the result of extension (or transtension) coupled with subsidence and basic volcanism. After post-volcanic subsidence, the basin was terminated by regional convergence, culminating in thrusting and folding in Late Eocene time. Comparisons of the Ulukışla Basin with the adjacent central Anatolian basins (e.g. Tuzgölü, Sivas and Şarkişla) support the view that these basins formed parts of a regional transtensional (to extensional) basin system. In our preferred hypothesis, the Ulukışla Basin developed during an intermediate stage of continental collision, after steady-state subduction of oceanic crust had more or less ended (“soft collision”), but before the opposing Tauride and Eurasian continental units forcefully collided (“hard collision”). Late Eocene forceful collision terminated the basinal evolution and initiated uplift of the Taurus Mountains.     

The Misis–Andırın Complex: a Mid-Tertiary melange related to late-stage subduction of the Southern Neotethys in S Turkey

The Mid-Tertiary (Mid-Eocene to earliest Miocene) Misis–Andırın Complex documents tectonic-sedimentary processes affecting the northerly, active margin of the South Tethys (Neotethys) in the easternmost Mediterranean region. Each of three orogenic segments, Misis (in the SW), Andırın (central) and Engizek (in the NE) represent parts of an originally continuous active continental margin. A structurally lower Volcanic-Sedimentary Unit includes Late Cretaceous arc-related extrusives and their Lower Tertiary pelagic cover. This unit is interpreted as an Early Tertiary remnant of the Mesozoic South Tethys. The overlying melange unit is dominated by tectonically brecciated blocks (>100 m across) of Mesozoic neritic limestone that were derived from the Tauride carbonate platform to the north, together with accreted ophiolitic material. The melange matrix comprises polymict debris flows, high- to low-density turbidites and minor hemipelagic sediments.The Misis–Andırın Complex is interpreted as an accretionary prism related to the latest stages of northward subduction of the South Tethys and diachronous continental collision of the Tauride (Eurasian) and Arabian (African) plates during Mid-Eocene to earliest Miocene time. Slivers of Upper Cretaceous oceanic crust and its Early Tertiary pelagic cover were accreted, while blocks of Mesozoic platform carbonates slid from the overriding plate. Tectonic mixing and sedimentary recycling took place within a trench. Subduction culminated in large-scale collapse of the overriding (northern) margin and foundering of vast blocks of neritic carbonate into the trench. A possible cause was rapid roll back of dense downgoing Mesozoic oceanic crust, such that the accretionary wedge taper was extended leading to gravity collapse. Melange formation was terminated by underthrusting of the Arabian plate from the south during earliest Miocene time.Collision was diachronous. In the east (Engizek Range and SE Anatolia) collision generated a Lower Miocene flexural basin infilled with turbidites and a flexural bulge to the south. Miocene turbiditic sediments also covered the former accretionary prism. Further west (Misis Range) the easternmost Mediterranean remained in a pre-collisional setting with northward underthrusting (incipient subduction) along the Cyprus arc. The Lower Miocene basins to the north (Misis and Adana) indicate an extensional (to transtensional) setting. The NE–SW linking segment (Andırın) probably originated as a Mesozoic palaeogeographic offset of the Tauride margin. This was reactivated by strike-slip (and transtension) during Later Tertiary diachronous collision. Related to on-going plate convergence the former accretionary wedge (upper plate) was thrust over the Lower Miocene turbiditic basins in Mid–Late Miocene time. The Plio-Quaternary was dominated by left-lateral strike-slip along the East Anatolian transform fault and also along fault strands cutting the Misis–Andırın Complex.     

班公湖-怒江结合带西段多岛弧盆系时空结构初步分析

笔者依据班公湖地区1：25万喀纳幅、日土县幅、羌多幅地质填图和专题研究工作取得的阶段性成果,将班公湖带的多岛弧盆系时空结构厘定为3条蛇绿混杂岩亚带。该3条亚带为盆地所隔,从北而南依次为班公湖带北亚带、班摩掌侏罗纪弧间盆地、班公湖带中亚带、日土-巴尔穷侏罗纪—早白垩世复合弧后盆地和班公湖带南亚带等。初步认为班公湖-怒江特提斯洋经历了晚三叠—早侏罗世往北俯冲、中晚侏罗世早期向北、往南双向俯冲、早白垩世往南俯冲等3次俯冲消亡阶段;同时,讨论了在班公湖带研究中存在的问题及其在反演班公湖-怒江结合带西段构造演化和在找矿方面的意义,以及进一步研究方向。     

Boninitic and tholeiitic basaltic lavas and dikes from dispersed Jurassic East Othris ophiolitic units,Greece: petrogenesis and geodynamic implications

ABSTRACT

Pillow lavas, massive lava flows, and sub-volcanic dikes of tholeiitic basaltic composition are found to be members of the Vrinena, Aerino, Eretria, and Velestino dispersed Middle–Upper Jurassic ophiolitic units in East Othris. The Vrinena and Eretria ophiolitic units appear to have been emplaced onto the Pelagonian continental margin during the Upper Jurassic–Lower Cretaceous, whereas the Aerino and Velestino units seem to have been finally emplaced during post-Palaeocene times. Geochemically these are divided into two groups: Group I includes subduction-related boninites and low-Ti basalts from the Vrinena and Aerino units, and Group II high-Ti basalts show spreading-type characteristics occurring in the Eretria and Velestino units. Primary magma of the Group I volcanics appears to have been formed after high partial melting degrees (~18%) of a highly depleted harzburgitic mantle source, under relatively high temperatures (mantle potential temperature ~1372°C). Petrogenetic modelling also suggests that the primary magma of the Group II volcanics were formed after lower partial melting degrees (~7%) of a moderately depleted mantle source. The petrological and geochemical data from the East Othris dispersed and diversely emplaced ophiolitic units provide evidence of a common intra-oceanic supra-subduction zone (SSZ) origin within the Pindos oceanic strand of the Western Tethys. Specifically, Group I lavas and dikes from Vrinena seem to represent the extrusive part of an almost complete fore- to island-arc ophiolitic sequence. Dikes of Aerino most likely correspond to fore-arc magmatic material that intruded within exhumed serpentinized ultramafic rocks through a subduction channel that developed close to the slab and towards the fore-arc and the accretionary prism. The Group II volcanics either corresponded to a fore-arc magmatic expression, which extruded earlier than Group I volcanics and prior to the establishment of a mature subduction zone, or represent back-arc to island-arc magmatism that was contemporaneous to the fore-arc magmatic activity during rollback subduction.     

Early Cretaceous sedimentary provenance and structural evolution of the central Sanandaj–Sirjan Zone,Iran: implications for palaeogeographic reconstructions of the northern Neo-Tethyan margin

ABSTRACT

The Early Cretaceous was an important epoch in the evolution of the Earth system in which major tectonic episodes occurred, especially along the Alpine–Himalayan belt. The paucity of reliable palaeogeographic data from the central segment of this geological puzzle, however, hampers the reconstruction of a panoramic view of its Early Cretaceous palaeogeography and geodynamic setting. Here we present multidisciplinary provenance data from Lower Cretaceous strata of the overriding plate of the Neo-Tethyan subduction zone (the Sanandaj–Sirjan Zone; SSZ, of central Iran), including structural, basin-fill evolution, petrographic and geochemical analyses. Sandstone provenance analysis of Lower Cretaceous red beds suggests the occurrence of sub-mature litho-quartzose sandstones attributed to an active continental arc margin in convergent setting predominantly derived from plutonic, quartzose sedimentary and metamorphic rocks exposed in the central SSZ. Weathering indices indicate moderate chemical weathering in the source area which may be related to close source-to-sink relationships or arid climate. Our palaeogeographic reconstructions and original geological mapping indicate that the erosion of uplifted basement rocks exposed in horst blocks provided the sediment sources for the syn-extensional deposition of uppermost Jurassic–lowermost Cretaceous conglomerates and Lower Cretaceous siliciclastic red beds within a continental retro-arc basin during initiation of the ‘Neo-Tethys 2?. The polyphase tectonic reactivation along the principal fault of the study area controlled the syn- and post-extensional tectonostratigraphic evolution that reflect the corresponding mechanical decoupling/coupling along the northern Neo-Tethyan plate margin.     

Petrogeochemical conditions and geodynamic settings of volcanic rocks in the Kiselyovka–Manoma accretionary complex (Russian Far East)

The Kiselyovka–Manoma accretionary complex formed at the end of the Early Cretaceous during subduction of the Pacific oceanic plate underneath the Khingan–Okhotsk active continental margin along the east of Eurasia. It is composed of Jurassic–Early Cretaceous oceanic chert, siliceous mudstone, and limestone that include a significant amount of basic volcanic rocks. The known and newly obtained data on the petrogeochemistry of the Jurassic and Early Cretaceous basalt from various parts of the accretionary complex are systemized in the paper. Based on the comprehensive analysis of these data, the possible geodynamic settings of the basalt are considered. The petrogeochemical characteristics provide evidence for the formation of basalt in different parts of the oceanic floor within the spreading ridge, as well as on oceanic islands far from the ridge. The basalts of oceanic islands are mostly preserved in the accretionary complex. The compositional variations of the basalts may be controlled by the different thickness of the oceanic lithosphere on which they formed. This is explained by the varying distances of the lithosphere from the spreading zone.     

川西松潘-甘孜弧前盆地的形成及演化

地处柴南缘昆中蛇绿杂岩带与羌塘地块北缘可可西里—金沙江古缝合线之间的松潘—甘孜褶皱带(包括东昆仑构造带)，其主体应属古特提斯洋晚石炭世一晚三叠世时期向其北侧的柴达木古陆南缘俯冲过程中在活动陆缘弧—沟间隙之间增生形成的一个大型弧前构造带。具有由弧前盆地沉积楔和基底增生杂岩构成的双重结构特点，其形成与冈瓦纳大陆北缘若尔盖“三角”地块的楔入及俯冲带向南迁移有关。大致经历了晚石炭世一早三叠世狭窄弧前盆地和中晚三叠世宽阔弧前盆地两个主要演化阶段。     

早白垩世华北克拉通岩石圈减薄与破坏动力学：兼论古太平洋型活动大陆边缘

早白垩世时期华北克拉通的演化为探索大陆再造提供了典型案例，强烈地壳伸展、岩石圈减薄及克拉通破坏的机理及动力学长期以来一直是争议的焦点。早白垩世岩石圈伸展形成了包括辽南和五莲变质核杂岩在内的地壳伸展构造组合，同时伴随着巨量壳- 幔岩浆活动性，这些构造- 岩浆活动是克拉通岩石圈壳- 幔耦合拆离与解耦拆离作用的结果，可以用克拉通岩石圈壳- 幔拆离模型(parallel extension tectonics)解释。与此同时，具有相似特点(时间、几何学、运动学和动力学)的构造- 岩浆活动遍布包含东北亚、中国华北和华南及俄罗斯远东地区等在内的整个欧亚大陆东部地区，反映在统一构造环境中发展和演化的本质，而华北克拉通成为早白垩世欧亚大陆东部地区岩石圈伸展的典型案例。广布的早白垩世伸展构造东侧紧邻古太平洋板块俯冲作用形成的陆缘增生杂岩带，构成独特的古太平洋型活动大陆边缘。这种大陆边缘保留和记录了与现今西太平洋型和安第斯型活动大陆边缘全然不一致的构造特点，包含增生杂岩(海沟增生楔处)与面状伸展构造域两个构造要素，但缺乏典型的大规模岩浆弧的存在。地幔分层对流对于古太平洋- 欧亚大陆间洋陆相互作用、大陆岩石圈伸展、克拉通岩石圈减薄与破坏提供了重要动力来源，而板块边缘力起着重要的辅助作用。     

Tectonic evolution of the Malay Peninsula

The Malay Peninsula is characterised by three north–south belts, the Western, Central, and Eastern belts based on distinct differences in stratigraphy, structure, magmatism, geophysical signatures and geological evolution. The Western Belt forms part of the Sibumasu Terrane, derived from the NW Australian Gondwana margin in the late Early Permian. The Central and Eastern Belts represent the Sukhothai Arc constructed in the Late Carboniferous–Early Permian on the margin of the Indochina Block (derived from the Gondwana margin in the Early Devonian). This arc was then separated from Indochina by back-arc spreading in the Permian. The Bentong-Raub suture zone forms the boundary between the Sibumasu Terrane (Western Belt) and Sukhothai Arc (Central and Eastern Belts) and preserves remnants of the Devonian–Permian main Palaeo-Tethys ocean basin destroyed by subduction beneath the Indochina Block/Sukhothai Arc, which produced the Permian–Triassic andesitic volcanism and I-Type granitoids observed in the Central and Eastern Belts of the Malay Peninsula. The collision between Sibumasu and the Sukhothai Arc began in Early Triassic times and was completed by the Late Triassic. Triassic cherts, turbidites and conglomerates of the Semanggol “Formation” were deposited in a fore-deep basin constructed on the leading edge of Sibumasu and the uplifted accretionary complex. Collisional crustal thickening, coupled with slab break off and rising hot asthenosphere produced the Main Range Late Triassic-earliest Jurassic S-Type granitoids that intrude the Western Belt and Bentong-Raub suture zone. The Sukhothai back-arc basin opened in the Early Permian and collapsed and closed in the Middle–Late Triassic. Marine sedimentation ceased in the Late Triassic in the Malay Peninsula due to tectonic and isostatic uplift, and Jurassic–Cretaceous continental red beds form a cover sequence. A significant Late Cretaceous tectono-thermal event affected the Peninsula with major faulting, granitoid intrusion and re-setting of palaeomagnetic signatures.     

A Section Across a Tethyan Suture in Northwestern Turkey

A section across a major Tethyan suture in northwestern Turkey is described in detail. The suture of Early Tertiary age juxtaposes two continental blocks with distinct stratigraphic, structural, and metamorphic features. The Sakarya Zone in the north is represented by Permo-Triassic accretion-subduction complexes, which are unconformably overlain by Jurassic to Paleocene sedimentary rocks. The Anatolide-Tauride Block to the south of the suture consists of two tectonic zones. The Tavsanli Zone consists of a coherent blueschist sequence with Late Cretaceous isotopic ages. This blueschist sequence is tectonically overlain by Cretaceous oceanic accretionary complexes and peridotite slabs. The Bornova Flysch Zone consists of Triassic to Cretaceous limestone blocks in an uppermost Cretaceous to Paleocene flysch. The suture is represented by a N-vergent thrust fault separating lithologies from these two continental blocks.

The orogenic history of the region can be considered in two stages. In the Late Cretaceous, the northern margin of the Anatolide-Tauride Block was subducted under the Tethyan oceanic lithosphere and was metamorphosed in blueschist-facies conditions. Blueschists were largely exhumed by the latest Cretaceous or early Paleocene, prior to the continental collision. In the second stage, during the Paleocene, the continent-continent collision produced a doubly vergent orogen involving both S- and N-vergent thrusting, but did not lead to major crustal thickening.     

Spatial–temporal relationships of Mesozoic volcanic rocks in NE China: Constraints on tectonic overprinting and transformations between multiple tectonic regimes

LA-ICP-MS zircon U–Pb ages and geochemical data are presented for the Mesozoic volcanic rocks in northeast China, with the aim of determining the tectonic settings of the volcanism and constraining the timing of the overprinting and transformations between the Paleo-Asian Ocean, Mongol–Okhotsk, and circum-Pacific tectonic regimes. The new ages, together with other available age data from the literature, indicate that Mesozoic volcanism in NE China can be subdivided into six episodes: Late Triassic (228–201 Ma), Early–Middle Jurassic (190–173 Ma), Middle–Late Jurassic (166–155 Ma), early Early Cretaceous (145–138 Ma), late Early Cretaceous (133–106 Ma), and Late Cretaceous (97–88 Ma). The Late Triassic volcanic rocks occur in the Lesser Xing’an–Zhangguangcai Ranges, where the volcanic rocks are bimodal, and in the eastern Heilongjiang–Jilin provinces where the volcanics are A-type rhyolites, implying that they formed in an extensional environment after the final closure of the Paleo-Asian Ocean. The Early–Middle Jurassic (190–173 Ma) volcanic rocks, both in the Erguna Massif and the eastern Heilongjiang–Jilin provinces, belong chemically to the calc-alkaline series, implying an active continental margin setting. The volcanics in the Erguna Massif are related to the subduction of the Mongol–Okhotsk oceanic plate beneath the Massif, and those in the eastern Jilin–Heilongjiang provinces are related to the subduction of the Paleo-Pacific Plate beneath the Eurasian continent. The coeval bimodal volcanic rocks in the Lesser Xing’an–Zhangguangcai Ranges were probably formed under an extensional environment similar to a backarc setting of double-direction subduction. Volcanic rocks of Middle–Late Jurassic (155–166 Ma) and early Early Cretaceous (145–138 Ma) age only occur in the Great Xing’an Range and the northern Hebei and western Liaoning provinces (limited to the west of the Songliao Basin), and they belong chemically to high-K calc-alkaline series and A-type rhyolites, respectively. Combined with the regional unconformity and thrust structures in the northern Hebei and western Liaoning provinces, we conclude that these volcanics formed during a collapse or delamination of a thickened continental crust related to the evolution of the Mongol–Okhotsk suture belt. The late Early Cretaceous volcanic rocks, widely distributed in NE China, belong chemically to a low- to medium-K calc-alkaline series in the eastern Heilongjiang–Jilin provinces (i.e., the Eurasian continental margin), and to a bimodal volcanic rock association within both the Songliao Basin and the Great Xing’an Range. The volcanics in the eastern Heilongjiang–Jilin provinces formed in an active continental margin setting related to the subduction of the Paleo-Pacific Plate beneath the Eurasian continent, and the bimodal volcanics formed under an extensional environment related either to a backarc setting or to delamination of a thickened crust, or both. Late Cretaceous volcanics, limited to the eastern Heilongjiang–Jilin provinces and the eastern North China Craton (NCC), consist of calc-alkaline rocks in the eastern Heilongjiang–Jilin provinces and alkaline basalts in the eastern NCC, suggesting that the former originated during subduction of the Paleo-Pacific Plate beneath the Eurasian continent, whereas the latter formed in an extensional environment similar to a backarc setting. Taking all this into account, we conclude that (1) the transformation from the Paleo-Asian Ocean regime to the circum-Pacific tectonic regime happened during the Late Triassic to Early Jurassic; (2) the effect of the Mongol–Okhotsk suture belt on NE China was mainly in the Early Jurassic, Middle–Late Jurassic, and early Early Cretaceous; and (3) the late Early Cretaceous and Late Cretaceous volcanics can be attributed to the subduction of the Paleo-Pacific Plate beneath the Eurasian continent.     

Late Cretaceous subduction initiation and Palaeocene–Eocene slab breakoff magmatism in South-Central Anatolia,Turkey

The Late Cretaceous Alihoca ophiolite in the Inner Tauride suture zone (ITSZ) of South-Central Turkey represents part of a single ophiolitic thrust sheet that originated from the Inner Tauride ocean. The ophiolite contains upper mantle peridotites, cumulate wehrlites, layered-to-isotropic gabbros, and microgabbroic-to-doleritic dikes. An ophiolitic mélange beneath the Alihoca ophiolite includes blocks of limestone, peridotite, dolerite, basalt, and deep-sea sedimentary rocks (radiolarite, chert) in a matrix comprising sheared serpentinite and mudstone. Isotropic gabbro and dolerite dike rocks show enrichment in Sr, K, Rb, Ba, and Th (LILE) and depletion of Ta, Nb, Zr, Ti, and Y (HFSE), indicating an island arc tholeiite (IAT) affinity. Relatively younger dolerite rocks display low TiO₂ (<0.5 wt.%) contents, concave REE profiles with low HREE concentrations, and high LREE values, typical of boninitic affinities. The Alihoca ophiolite, hence, displays an IAT to boninitic geochemical progression in its magmatic evolution, reminiscent of many other Tethyan ophiolites in the region. It represents the remnant of a forearc oceanic crust, which developed during the early stages of subduction within the Inner Tauride ocean. Volcanic, volcano-sedimentary, and sedimentary rocks of the Uluk??la–Çamard? basin north of the ITSZ disconformably overlie the mafic-ultramafic rocks of the Alihoca ophiolite. Pillowed and massive lavas of the latest Cretaceous–Palaeocene Uluk??la Formation have alkaline basalt-to-basaltic andesite compositions, displaying relatively enriched LILE and LREE patterns with negative Nb and Ta anomalies. These geochemical features suggest that magmas of the Uluk??la–Çamard? volcanic rocks formed from partial melting of a metasomatized lithospheric mantle. This melting event was triggered by the influx of asthenospheric heat through a slab breakoff-induced window in the downgoing Tethyan oceanic lithosphere.     

Late Paleozoic-Mesozoic subduction and accretion of the Paleo-Pacific Plate:Insights from ophiolitic rocks in the Wandashan accretionary complex,NE China

The Wandashan accretionary complex(AC),consisting of the Raohe and Yuejinshan complexes,is located on the continental margin of Northeast Asia and represents an excellent source of information about Paleo-Pacific subduction and accretion.However,the protolith nature and tectonic evolution of the Wandashan AC are under debate.This contribution reports new geochronological,geochemical,and Sr-Nd-Pb-Hf isotopic data for ophiolitic rocks from the Wandashan AC.The 169-166 Ma plagioclasites and homogeneous gabbros from the Raohe complex are OIBs while 228-214 Ma homogeneous gabbros are continental VABs.Cumulate gabbros from the Yuejinshan complex formed at 280-278 Ma and～220 Ma and have similar characteristics with E-MORB and N-MORB,respectively.They are BABBs and their primary magma was derived from a source region between EMI and EMII that was affected by con-tinental crustal contamination as well as subduction-zone metasomatism.Combined with previous stud-ies,we suggest that the onset of subduction of the Paleo-Pacific Plate was in the Early Permian.Subsequently,a back-arc basin,whose present suture is on the eastern margin of the Jiamusi Massif,formed and widened during 280-232 Ma,after which the basin closed and BABBs were emplaced to form the Yuejinshan complex during 210-180 Ma.The formation of VABs of the Raohe complex is coincident with the closure of the back-arc basin,and together with the 169-166 Ma OIBs,they constitute a major part of the Raohe complex.The accretionary process was completed during 133-131 Ma.Taken together,the ophiolitic rocks indicating multistage magmatism in the Paleo-Wandashan region recorded the formation-closure process of back-arc basin and the accretionary process of the Wandashan AC,during the westward subduction of the Paleo-Pacific plate.The back-arc basin identified in our study sheds new lights on geodynamic evolution model of subduction and accretion of the Paleo-Pacific Plate on the continental margin of NE Asia.     

Deformation history of the ophiolite sequence from the Balagne Nappe,northern Corsica: insights in the tectonic evolution of Alpine Corsica

In Alpine Corsica, the Jurassic ophiolites represent remnants of oceanic lithosphere belonging to the Ligure‐Piemontese Basin located between the Europe/Corsica and Adria continental margins. In the Balagne area, a Jurassic ophiolitic sequence topped by a Late Jurassic–Late Cretaceous sedimentary cover crops out at the top of the nappe pile. The whole ophiolitic succession is affected by polyphase deformation developed under very low‐grade orogenic metamorphic conditions. The original palaeogeographic location and the emplacement mechanisms for the Balagne ophiolites are still a matter of debate and different interpretations for its history have been proposed. The deformation features of the Balagne ophiolites are outlined in order to provide constraints on their history in the framework of the geodynamic evolution of Alpine Corsica. The deformation history reconstructed for the Balagne Nappe includes five different deformation phases, from D1 to D5. The D1 phase was connected with the latest Cretaceous/Palaeocene accretion into the accretionary wedge related to an east‐dipping subduction zone followed by a Late Eocene D2 phase related to emplacement onto the Europe/Corsica continental margin. The subsequent D3 phase was characterized by sinistral strike‐slip faults and related deformations of Late Eocene–Early Oligocene age. The D4 and D5 phases were developed during the Early Oligocene–Late Miocene extensional processes connected with the collapse of the Alpine belt. Copyright © 2003 John Wiley & Sons, Ltd.     

对雅鲁藏布江结合带形成演化的再探讨

通过1∶5万区域地质调查和收集相关资料的综合研究,本文对雅鲁藏布江结合带的形成演化作了进一步的探讨。雅鲁藏布江特提斯洋具有弧后扩张洋盆的性质,在早三叠世至中三叠世中期洋盆初步形成,中三叠世晚期至晚三叠世洋盆全面形成,从早侏罗世至晚白垩世洋盆逐步萎缩,到古新世至始新世关闭。南带的蛇绿岩主要为洋中脊扩张型(MORB型),形成于中三叠世晚期至晚三叠世。北带的蛇绿岩主要为与洋内俯冲相关的俯冲带上盘型(SSZ型),形成于早中侏罗世。带内侏罗纪至白垩纪其他岩浆岩主要为前弧玄武岩类(FAB型)。显示雅鲁藏布江特提斯洋从早侏罗世开始发生了洋内俯冲,并同步向北向冈底斯带之下主动俯冲消减和向南向喜马拉雅地块之下被动俯冲消减,持续发展到晚白垩世,在古新世至始新世俯冲碰撞消亡转化为结合带。     

The Bentong–Raub Suture Zone

It is proposed that the Bentong–Raub Suture Zone represents a segment of the main Devonian to Middle Triassic Palaeo-Tethys ocean, and forms the boundary between the Gondwana-derived Sibumasu and Indochina terranes. Palaeo-Tethyan oceanic ribbon-bedded cherts preserved in the suture zone range in age from Middle Devonian to Middle Permian, and mélange includes chert and limestone clasts that range in age from Lower Carboniferous to Lower Permian. This indicates that the Palaeo-Tethys opened in the Devonian, when Indochina and other Chinese blocks separated from Gondwana, and closed in the Late Triassic (Peninsular Malaysia segment). The suture zone is the result of northwards subduction of the Palaeo-Tethys ocean beneath Indochina in the Late Palaeozoic and the Triassic collision of the Sibumasu terrane with, and the underthrusting of, Indochina. Tectonostratigraphic, palaeobiogeographic and palaeomagnetic data indicate that the Sibumasu Terrane separated from Gondwana in the late Sakmarian, and then drifted rapidly northwards during the Permian–Triassic. During the Permian subduction phase, the East Malaya volcano-plutonic arc, with I-Type granitoids and intermediate to acidic volcanism, was developed on the margin of Indochina. The main structural discontinuity in Peninsular Malaysia occurs between Palaeozoic and Triassic rocks, and orogenic deformation appears to have been initiated in the Upper Permian to Lower Triassic, when Sibumasu began to collide with Indochina. During the Early to Middle Triassic, A-Type subduction and crustal thickening generated the Main Range syn- to post-orogenic granites, which were emplaced in the Late Triassic–Early Jurassic. A foredeep basin developed on the depressed margin of Sibumasu in front of the uplifted accretionary complex in which the Semanggol “Formation” rocks accumulated. The suture zone is covered by a latest Triassic, Jurassic and Cretaceous, mainly continental, red bed overlap sequence.     

Petrology,geochemistry and geochronology of the Zhongcang ophiolite,northern Tibet: implications for the evolution of the Bangong-Nujiang Ocean

Ophiolites are widespread along the Bangong-Nujiang suture zone, northern Tibet. However, it is still debated on the formation ages and tectonic evolution process of these ophiolites. The Zhongcang ophiolite is a typical ophiolite in the western part of the Bangong-Nujiang suture zone. It is composed of serpentinized peridotite, cumulate and isotropic gabbros, massive and pillow basalts, basaltic volcanic breccia, and minor red chert. Zircon SHRIMP Ue Pb dating for the isotropic gabbro yielded weighted mean age of 163.4 ± 1.8 Ma. Positive zircon ε Hf(t) values(+15.0 to +20.2) and mantle-like σ~(18)O values(5.29 ±0.21)% indicate that the isotropic gabbros were derived from a long-term depleted mantle source. The isotropic gabbros have normal mid-ocean ridge basalt(N-MORB) like immobile element patterns with high Mg O, low TiO_2 and moderate rare earth element(REE) abundances, and negative Nb,Ti, Zr and Hf anomalies. Basalts show typical oceanic island basalt(OIB) geochemical features, and they are similar to those of OIB-type rocks of the Early Cretaceous Zhongcang oceanic plateau within the Bangong-Nujiang Ocean. Together with these data, we suggest that the Zhongcang ophiolite was probably formed by the subduction of the Bangong-Nujiang Ocean during the Middle Jurassic. The subduction of the Bangong-Nujiang Tethyan Ocean could begin in the Earlye Middle Jurassic and continue to the Early Cretaceous, and finally continental collision between the Lhasa and Qiangtang terranes at the west Bangong-Nujiang suture zone probably has taken place later than the Early Cretaceous(ca. 110 Ma).