Qualitative and quantitative assessment of TanDEM-X DEM over western Himalayan glaciated terrain

Glaciers have a high impact in the socio-economic sectors including water supply, energy production, flood and avalanches. A high precision digital elevation model (DEM) is required to monitor glaciers and to study various glacier processes. The present study deals with the qualitative and quantitative evaluation of the DEM generated from the bistatic TanDEM-X data by comparing it with GPS, Ice, Cloud, and land Elevation Satellite (ICESat) data and standard global DEMs such as Shuttle Radar Topography Mission (SRTM) and Advanced Space-borne Thermal Emission and Reflection Radiometer Global DEM (ASTER GDEM). The study area consists of highly undulating glaciated terrain in western Himalaya, India. The results reveal that TanDEM-X is slightly better than SRTM both qualitatively and quantitatively, whereas ASTER GDEM showing maximum discrepancy among the three DEMs. The Root Mean Square Error (RMSE) of the TanDEM-X DEM with respect to GPS is 3.5 m at lower relief and 11.9 m at glaciated terrain, against 6.7 and 12.5 m for SRTM and 9.3 and 19.8 m for ASTER GDEM, respectively, for the same sites. On an average, for the whole study area, the RMSE of TanDEM-X is 7.9 m, SRTM is 9.3 m and ASTER GDM is 14.2 m. The RMSE of TanDEM-X, SRTM and ASTER GDEM with respect to ICESat are 16.3, 19.9 and 101.1 m, respectively. It is evident from the analysis that though SRTM is closer to TanDEM-X in terms of accuracy in the mountainous terrain, however, TanDEM-X will be more useful for studying glacier dynamics and topography.     

Validation of Indian National DEM from Cartosat-1 Data

CartoDEM is an Indian National DEM generated from Cartosat-1 stereo data. Cartosat-1, launched in May, 2005, is an along track (aft ?5°, Fore +26°) stereo with 2.5 m GSD, give base-height ratio of 0.63 with 27 km swath. The operational procedure of DEM generation comprises stereo strip triangulation of 500?×?27 km segment with 10 m posting along with 2.5 m resolution ortho image and free—access posting of 30 m has been made available (bhuvan.nrsc.gov.in). A multi approach evaluation of CartoDEM comprising (a) absolute accuracy with respect to ground control points for two sites namely Jagatsinghpur -flat and Dharamshala- hilly; second site i.e. Alwar-plain and hilly with high resolution aerial DEM, (b) relative difference between SRTM and ASTERDEM (c) absolute accuracy with ICESat GLAS for two sites namely Jagatsinghpur-plain and Netravathi river, Western Ghats-hilly (d) relative comparison of drainage delineation with respect to ASTERDEM is reported here. The absolute height accuracy in flat terrain was 4.7 m with horizontal accuracy of 7.3 m, while in hilly terrain it was 7 m height with a horizontal accuracy of 14 m. While comparison with ICESat GLAS data absolute height difference of plain and hilly was 5.2 m and 7.9 m respectively. When compared to SRTM over Indian landmass, 90 % of pixels reported were within ±8 m difference. The drainage delineation shows better accuracy and clear demarcation of catchment ridgeline and more reliable flow-path prediction in comparison with ASTER. The results qualify Indian DEM for using it operationally which is equivalent and better than the other publicly available DEMs like SRTM and ASTERDEM.     

Accuracy assessment of GDEM,SRTM, and DLR-SRTM in Northeastern China

This paper compares the accuracy of Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) Global Digital Elevation Model (GDEM), Shuttle Radar Topography Mission (SRTM) C-band and German Aerospace Centre (DLR)-SRTM X-band digital elevation models (DEMs) with the Ziyuan 3 (ZY-3) stereoscopic DEM and ground control points (GCPs). To date, the horizontal error of these DEMs has received little attention in accuracy assessments. Using the ZY-3 DEM as reference, this study examines (1) the horizontal offset between the three DEMs and the reference DEM using the normalised cross-correlation method, (2) the vertical accuracy of those DEMs using kinematic GPS data and (3) the relationship between the three DEMs and the reference ZY-3 DEM. The results show that the SRTM and DLR-SRTM have greater vertical accuracy after applying horizontal offset correction, whereas the vertical accuracy of the ASTER GDEM is less than the other two DEMs. These methods and results can be useful for researchers who use DEMs for various applications.     

Evaluation of digital elevation models for delineation of hydrological response units in a Himalayan watershed

This study reports results from evaluation of the quality of digital elevation model (DEM) from four sources viz. topographic map (1:50,000), Shuttle Radar Topographic Mission (SRTM) (90 m), optical stereo pair from ASTER (15 m) and CARTOSAT (2.5 m) and their use in derivation of hydrological response units (HRUs) in Sitla Rao watershed (North India). The HRUs were derived using water storage capacity and slope to produce surface runoff zones. The DEMs were evaluated on elevation accuracy and representation of morphometric features. The DEM derived from optical stereo pairs (ASTER and CARTOSAT) provided higher vertical accuracies than the SRTM and topographic map-based DEM. The SRTM with a coarse resolution of 90 m provided vertical accuracy but better morphometry compared to topographic map. The HRU maps derived from the fine resolution DEM (ASTER and CARTOSAT) were more detailed but did not provide much advantage for hydrological studies at the scale of Sitla Rao watershed (5800 ha).     

Evaluation and Comparison of Multi Resolution DEM Derived Through Cartosat-1 Stereo Pair – A Case Study of Damanganga Basin

The study evaluates and compares Digital Elevation Model (DEM) data of various grid spacing derived using high resolution Cartosat 1 stereo data for hydrologic applications. DEM is essential in modeling different environmental processes which depend on surface elevation. The accuracy of derived DEM varies with grid spacing and source. The CartoDEM is the photogrammetric DEM derived from stereo pairs. Damanganga basin lying in the Western Ghats was analysed using 11 Carto stereo pairs. The process of triangulation resulted in RMSE of 0.42. DEM was extracted at 10 m, 20 m, 30 m, 40 m, 50 m and 90 m grid spacing and compared with ASTER GDEM (30 m) and SRTM DEM (90 m). DEM accuracy was checked with Root Mean Square Error (RMSE) statistic for random points generated in different elevation zones. Extracted stream networks were compared based on Correctness Index and Figure of Merit index, calculated for all the Digital Elevation Models at varying cell sizes. In order to further evaluate the DEM’s, a simple flood simulation with no water movement and no consideration of real time precipitation data was carried out and relationship between heights of flood stage and inundation area for each Digital Elevation Model was also established.     

DEM约束的卫星影像定位法

作为"云控制"摄影测量理论和方法的发展,研究了DEM约束的立体卫星影像区域网平差方法。与DEM仅作为高程控制信息使用,或者是通过DEM表面匹配实现绝对定向的间接定位方法不同,DEM作为平高控制信息被直接引入至基于RFM模型的卫星影像区域网平差之中。本文方法将连接点地面高程与DEM格网内插高程之差作为虚拟观测值构建约束方程,不仅利用了DEM高程信息,并且利用了其地形曲面包含的平面信息,以"云控制"方式在区域网平差过程中有效消除卫星影像RPC参数中包含的整体偏移及区域网内部的扭曲变形,实现了无地面控制点条件下卫星影像平面及高程绝对定位精度的大幅提升。使用覆盖山东全境的330景天绘一号立体卫星影像进行试验,分别以AW3D30、ASTER GDEM和SRTM GL3共3种开源DEM作为控制信息,并使用100个外业实测控制点进行精度评测。试验表明,以DEM作为控制可显著提高区域网平差的平面与高程精度,卫星影像绝对定位精度与DEM自身精度有关。当使用AW3D30作为控制时,可以取得与使用100个外业控制点平差同等精度,平面中误差为5.0 m(约1像素),高程中误差为2.9 m。试验结果证明了DEM替代外业控制点作为平差控制信息的有效性与可行性。     

Comparison of basin morphometry derived from topographic maps,ASTER and SRTM DEMs: an example from Kerala,India

The drainage network of a sixth-order tropical river basin, viz. Ithikkara river basin, was extracted from different sources such as Survey of India topographic maps (1: 50,000; TOPO) and digital elevation data of Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) (30 m) and Shuttle Radar Topography Mapping Mission (SRTM) (90 m). Basin morphometric attributes were estimated to evaluate the accuracy of the digital elevation model (DEM)-derived drainage networks for hydrologic applications as well as terrain characterization. The stream networks derived from ASTER and SRTM DEMs show significant agreement (with slight overestimation of lower order streams) with that of TOPO. The study suggests that SRTM (despite the coarser spatial resolution) provides better results, in drainage delineation and basin morphometry, compared to ASTER. Further, the variability of basin morphometry among the data sources might be attributed to spatial variation of elevation, raster grid size and vertical accuracy of the DEMs as well as incapability of the surface hydrologic analysis functions in the GIS platform.     

Mapping from ASTER stereo image data: DEM validation and accuracy assessment

The Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) on-board the National Aeronautics and Space Administration's (NASA's) Terra spacecraft provides along-track digital stereo image data at 15-m resolution. As part of ASTER digital elevation model (DEM) accuracy evaluation efforts by the US/Japan ASTER Science Team, stereo image data for four study sites around the world have been employed to validate prelaunch estimates of heighting accuracy. Automated stereocorrelation procedures were implemented using the Desktop Mapping System (DMS) software on a personal computer to derive DEMs with 30- to 150-m postings. Results indicate that a root-mean-square error (RMSE) in elevation between ±7 and ±15 m can be achieved with ASTER stereo image data of good quality. An evaluation of an ASTER DEM data product produced at the US Geological Survey (USGS) EROS Data Center (EDC) yielded an RMSE of ±8.6 m. Overall, the ability to extract elevations from ASTER stereopairs using stereocorrelation techniques meets expectations.     

基于ICESat-2 ATLAS数据的DEM高程精度评价

为探究ASTER GDEMV3、SRTM1 DEM和AW3D30 DEM 3种开源DEM数据的高程精度,本文以高精度ICESat-2 ATLAS测高数据为参考数据,利用GIS统计分析、误差相关分析及数理统计对DEM的高程精度进行对比评价。结果表明：①AW3D30的质量最稳定;SRTM1 DEM在平原精度最高;在高原山地精度由高到低依次为AW3D30 DEM、ASTER GDEMV3、SRTM1 DEM。②DEM数据高程精度受地表覆盖影响较大,且与地形因素密切相关,在相同地表覆盖的两个研究区中DEM数据高程精度表现情况不一致,SRTM在平原地表覆盖下精度表现最好,平均误差为3.15 m,AW3D30 DEM在山地地表覆盖下精度表现最好,平均误差为7.61 m。③坡度对DEM数据的高程精度影响较大,在两个研究区3种DEM数据的高程误差均随坡度的增加而增加;坡向对DEM数据的高程精度影响较小,未发现明显的规律。     

Uncertainty analysis of soil erosion modelling using different resolution of open-source DEMs

The Digital Elevation Model (DEM) is one of the important parameters of soil erosion assessment and notable uncertainties are found in using different resolutions of the DEM. Revised Universal Soil Loss Equation model has been applied to analyze the effect of open-source DEMs with different resolution and accuracy on the uncertainties of soil erosion modelling in a part of the Narmada river basin in Madhya Pradesh in central India. Selected open-source DEMs are GTOPO30 (1 km), SRTM (30 and 90 m), CARTOSAT (30 m) and ASTER (30 m), used for estimating erosion rate. Results with better accuracy are achieved with the high-resolution DEMs (30 m) with higher vertical accuracy than the coarse resolution DEMs with lower accuracy. This study has presented potential uncertainties introduced by the open-source DEMs in soil erosion modelling for better understanding of appropriate selection and acceptable errors for researchers.     

Evaluation of vertical accuracy of open source Digital Elevation Model (DEM)

Digital Elevation Model (DEM) is a quantitative representation of terrain and is important for Earth science and hydrological applications. DEM can be generated using photogrammetry, interferometry, ground and laser surveying and other techniques. Some of the DEMs such as ASTER, SRTM, and GTOPO 30 are freely available open source products. Each DEM contains intrinsic errors due to primary data acquisition technology and processing methodology in relation with a particular terrain and land cover type. The accuracy of these datasets is often unknown and is non-uniform within each dataset. In this study we evaluate open source DEMs (ASTER and SRTM) and their derived attributes using high postings Cartosat DEM and Survey of India (SOI) height information. It was found that representation of terrain characteristics is affected in the coarse postings DEM. The overall vertical accuracy shows RMS error of 12.62 m and 17.76 m for ASTER and SRTM DEM respectively, when compared with Cartosat DEM. The slope and drainage network delineation are also violated. The terrain morphology strongly influences the DEM accuracy. These results can be highly useful for researchers using such products in various modeling exercises.     

不同格网密度的DSM/DEM对影像分类精度的影响研究

在无控制点的卫星影像正射校正中,大多采用DSM/DEM数据作为辅助数据来消除或限制因地形起伏引起的形变,然而经不同格网密度的DSM/DEM正射校正后的影像对后续处理会产生不同程度的影响,如对地物分类精度产生影响。针对这一问题,本文分别采用不同的DSM/DEM数据(China DSM 15 m、ASTER GDEM 30 m和SRTM 90 m)对资源三号影像进行正射校正,然后对正射校正后影像利用支持向量机进行分类,比较正射校正后影像结果的分类精度。结果表明:在相同重采样方法下,影像经China DSM 15 m DSM正射校正后结果的分类精度优于ASTER GDEM 30 m DEM和SRTM 90 m DEM。     

Assessment and validation of evapotranspiration using SEBAL algorithm and Lysimeter data of IARI agricultural farm,India

Evapotranspiration (ET) is a vital process in land surface atmosphere research. In this study, Surface Energy Balance Algorithm for Land (SEBAL) for the assessment of ET (for 23 December 2010, 8 January 2011, 24 January 2011, 9 February 2011, 25 February 2011, 29 March 2011 and 14 April 2011) from LANDSAT7-ETM+ and validation with Lysimeter data set is illustrated. It is based on the evaporative fraction concept, and it has been applied to LANDSAT7-ETM + (30 m resolution) data acquired over the Indian Agricultural Research Institute’s agricultural farm land. The ET from SEBAL was compared with Lysimeter ET using four statistical tests (root-mean-square error (RMSE), relative root-mean-square error (R-RMSE), mean absolute error (MAE), and normalized root-mean square error (NRMSE)), and each test showed a good correlation between the predicted and observed ET values. Results from this study revealed that the RMSE of crop-growing period was 0.51 mm d^?1 for ET_SEBAL, i.e. ET_SEBAL having good accuracy with respect to observed ET_Lysimeter. Results were also validated using R-RMSE test, which also proved that ET_SEBAL data are having good accuracy with respect to observed ET_Lysimeter as R-RMSE of crop-growing period is 0.19 mm d^?1. MAE (0.19), NRMSE (0.21) and r² (0.91) tests indicated that model prediction is significant, and model can be effectively used for the estimation of ET from SEBAL as input of remote sensing data sets. Finally, the SEBAL has been useful for remote agricultural land where ground-based data (Lysimeter data) are not available for daily ET (ET_24 h) estimation. The temporal study of the ET_24 h values analysed has revealed that the highest ET_24 h values are owing to the higher development (high greenness) of crops, whereas the lower values are related to the lower development (low greenness) or null crop.     

多源DEM融合的高差拟合神经网络方法

本文侧重于介绍智能化摄影测量机器学习的高差拟合神经网络方法。观测手段和处理方式等限制导致全球高质量无缝DEM数据的缺乏,进而制约了它在水文、地质、气象及军事等领域的应用。本文提出了一种基于高差拟合神经网络的多源DEM融合方法,尝试融合全球DEM产品SRTM1、ASTER GDEM v2和激光雷达测高数据ICESat GLAS。首先,根据ICESat GLAS的相关参数及与DEM数据的高程差值,结合坡度自适应的思想设置高差阈值对ICESat GLAS进行滤波,剔除异常数据点。然后,以ICESat GLAS数据为控制点,利用神经网络模型拟合ASTER GDEM v2的误差分布。以地形坡度信息和经纬度坐标作为网络输入,ICESat GLAS和ASTER GDEM v2的高程差值作为目标输出,训练得到预测高差,将其与ASTER GDEM v2高程值相加即可获得校正结果。最后,引入TIN差分曲面的方法,利用校正后的ASTER GDEM v2高程值对SRTM1的数据空洞进行填充,融合生成空间无缝DEM。本文通过随机选取数据进行真实试验,对模型进行了精度验证,并给出了处理结果的定量评价和目视效果。结果表明,不论是空洞还是整体区域,本文方法相比其他DEM数据集和其他方法的处理结果都能够在RMSE上表现出优势,同时,本文提出的方法能够有效克服ASTER GDEM中异常值的影响,得到空间无缝DEM。     

露天矿区多源数字高程模型数据对比分析

针对数字高程模型数据源不同会带来一定的不确定性和差异性的问题,选取德国某露天矿为实验区,以高精度DEM数据TanDEM-X为参照,对比了SRTM、AW3D30、ASTER GDEM与TanDEM-X数据的高程精度,分析了DEM数据的差异.结果表明:(1)露天矿区的开采和复垦活动明显地体现在了不同时期获取的DEM高程变化...     

Topographic correction of ALOS-PALSAR images using InSAR-derived DEM

Topographic corrections of synthetic aperture radar (SAR) images over hilly regions are vital for retrieval of correct backscatter values associated with natural targets. The coarse resolution external digital elevation models (DEM) available for topographic corrections of high resolution SAR images often result into degradation of spatial resolution or improper estimation of backscatter values in SAR images. Also, many a times the external DEMs do not spatially co-register well with the SAR data. The present study showcases the methodology and results of topographic correction of ALOS-PALSAR image using high resolution DEM generated from the same data. High resolution DEMs of Jaipur region, India were generated using multiple pair SAR images acquired from ALOS-PALSAR using interferometric (InSAR) techniques. The DEMs were validated using differential global positioning system measured elevation values as ground control points and were compared with photogrammetric DEM (advanced spaceborne thermal emission and reflection radiometer – ASTER) and SRTM (Shuttle Radar Topography Mission) DEM. It was observed that ALOS-PALSAR images with optimum baseline parameters produced high resolution DEM with better height accuracy. Finally, the validated DEM was used for topographic correction of ALOS-PALSAR images of the same region and were found to produce better result as compared with ASTER and SRTM-DEM.     

中国及周边区域ASTERGDEM与SRTMDEM高程对比分析及互补修复

本文分析了ASTER GDEM和SRTM DEM的获取方式,通过对两者在中国及周边区域高程的对比分析,得出两者高程间存在系统误差,前者高程比后者平均低4.9m。ASTER GDEM在许多区域特别是水域及高山区常存在明显粗差;SRTM DEM在特别是高山区域会出现空白区域,但其有效区域层次清晰、细节分明,无明显粗差,可靠性高。经过填补及高差约束限制修复,生成了无空白区域的SRTM DEM和可靠性更高的ASTER GDEM。     

Extraction and validation of cartosat-1 DEM

CARTOSAT-1 satellite, launched in May, 2005 is a dedicated along track stereo mission providing high quality data for topographic and cartographic applications. The present paper describes the evaluation of the Cartosat-1 stereo data, mainly through the generation and validation of DEM for moderately undulating and hilly areas. Photogrammetric techniques have been used for generation of DEM and Orthoimage for two cases i.e. 1) using RPCs (Rational Polynomial Coefficients) and 2) using RPCs along with ground control points. Root Mean Square Error (RMSE) in elevation values for the moderately undulating (Dehradun) and hilly area (Shimla), are found to be 4.38 and 3.69m respectively.     

利用弹性反馈神经网络融合ASTER GDEM和SRTM1高程数据

由于数据获取与后期处理方式不同,先进星载热发射和反射辐射仪全球数字高程模型(advanced spaceborne thermalemissionandreflectionradiometerglobaldigitalelevationmodel,ASTERGDEM)和航天飞机雷达地形测绘任务(shuttle radar topography mission,SRTM)数据在高程精度上存在差异,采用弹性反馈（resilient backpropagation,RProp）神经网络算法对二者进行融合处理,实现优势互补以提升高程精度。选取两个黄土丘陵沟壑地貌样区分别用于模型建立与效果验证,1∶10 000高程精度为参考数据,在建模样区应用RProp神经网络算法构建ASTER GDEM高程校正模型、SRTM1高程校正模型、ASTER GDEM与SRTM1高程融合模型,同时应用误差反向传播(back propagation,BP)神经网络建立ASTER GDEM与SRTM1高程融合模型,将这些模型的高程精度优化效果进行对比,并在验证样区检验RProp融合模型的可行性。结果表明,RProp融合模...