Stratigraphic evolution of an aeolian erg margin system: the Permian Cedar Mesa Sandstone, SE Utah, USA

The Permian Cedar Mesa Sandstone of south‐east Utah is a predominantly aeolian succession that exhibits a complex spatial variation in sedimentary architecture which, in terms of palaeogeographic setting, reflects a transition from a dry erg centre, through a water table‐controlled aeolian‐dominated erg margin, to an outer erg margin subject to periodic fluvial incursion. The erg margin succession represents a wet aeolian system, accumulation of which was controlled by progressive water table rise coupled with ongoing dune migration and associated changes in the supply and availability of sediment for aeolian transport. Variation in the level of the water table relative to the depositional surface determined the nature of interdune sedimentary processes, and a range of dry, damp and wet (flooded) interdune elements is recognized. Variations in the geometry of these units reflect the original morphology and the migratory behaviour of spatially isolated dry interdune hollows in the erg centre, locally interconnected damp and/or wet interdune ponds in the aeolian‐dominated erg margin and fully interconnected, fluvially flooded interdune corridors in the outer erg margin. Relationships between aeolian dune and interdune units indicate that dry, damp and wet interdune sedimentation occurred synchronously with aeolian bedform migration. Temporal variation in the rates of water‐table rise and bedform migration determined the angle of climb of the erg margin succession, such that accumulation rates increased during periods of rapidly rising water table, whereas sediment bypassing (zero angle of climb) occurred in the aftermath of flood events in response to periods of elevated but temporarily static water table. During these periods in the outer erg margin, the expansion of fluvially flooded interdunes in front of non‐climbing but migrating dunes resulted in the amalgamation of laterally adjacent interdunes and the generation of regionally extensive bypass (flood) supersurfaces. A spectrum of genetic depositional models is envisaged that accounts for the complex spatial and temporal evolution of the Cedar Mesa erg margin succession.     

Aeolian dune‐field development in a water table‐controlled system: Skeiđarársandur,Southern Iceland

Aeolian dune fields characterized by partly vegetated bedforms undergoing active construction and with interdune depressions that lie at or close to the water table are widespread on Skei?arársandur, Southern Iceland. The largest aeolian dune complex on the sandur covers an area of 80 km² and is characterized by four distinct landform types: (i) spatially isolated aeolian dunes; (ii) extensive areas of damp and wet (flooded) interdune flat with small fluvial channels; (iii) small aeolian dune fields composed of assemblages of bedforms with simple morphologies and small, predominantly damp, interdune corridors; and (iv) larger aeolian dune fields composed of assemblages of complex bedforms floored by older aeolian dune deposits that are themselves raised above the level of the surrounding wet sandur plain. The morphology of each of these landform areas reflects a range of styles of interaction between aeolian dune, interdune and fluvial processes that operate coevally on the sandur surface. The geometry, scale, orientation and facies composition of sets of strata in the cores of the aeolian dunes, and their relationship to adjoining interdune strata, have been analysed to explain the temporal behaviour of the dunes in terms of their mode of initiation, construction, pattern of migration, style of accumulation and nature of preservation. Seasonal and longer‐term flooding‐induced changes in water table level have caused episodic expansion and contraction of the wet interdune ponds. Most of the dunes are currently undergoing active construction and migration and, although sediment availability is limited because of the high water table, substantial aeolian transport must occur, especially during winter months when the surface of the wet interdune ponds is frozen and sand can be blown across the sandur without being trapped by surface moisture. Bedforms within the larger dune fields have grown to a size whereby formerly damp interdune flats have been reduced to dry enclosed depressions and dry aeolian system accumulation via bedform climb is ongoing. Despite regional uplift of the proximal sandur surface in response to glacial retreat and unloading over the past century, sediment compaction‐induced subsidence of the distal sandur is progressively placing aeolian deposits below the water table and is enabling the accumulation of wet aeolian systems and increasing the likelihood of their long‐term preservation. Wet, dry and stabilizing aeolian system types all co‐exist on Skei?arársandur and the dunes are variously undergoing coeval construction, accumulation, bypass, stabilization and destruction as a result of interactions between localized factors.     

A stratigraphic model to account for complexity in aeolian dune and interdune successions

Wet aeolian systems, in which the water table or its capillary fringe are in contact with the accumulation surface, such that moisture influences sedimentation, are well‐known from modern aeolian systems and several ancient preserved successions are recognized from outcrop. One common mechanism by which accumulation of wet aeolian system deposits occurs is via a progressive rise in the relative water‐table level that is coincident with ongoing dune and interdune migration, the angle of dune climb being determined by the ratio between the rate of relative water‐table rise and the rate of downwind migration of the bedforms. Accumulations of wet aeolian system deposits tend to be characterized by units of climbing dune strata separated by units of damp or wet interdune strata. For simple geometric configurations, where the size of the dune and interdune units, the rate of bedform migration and the rate of aggradation all remain constant over space and time, the resulting accumulation has a simple architecture characterized by sets of uniform thickness inclined at a constant angle. However, the dynamic nature of most aeolian dune systems means that such simple configurations are unlikely in nature. The complexity inherent in these systems is accounted for here by a numerical model in which key controlling parameters, including dune and interdune wavelength and spacing, migration rate and aggradation rate, are allowed to vary systematically both spatially (from a dune‐field centre to its margin) and temporally (in response to changes in sediment availability or water‐table level). The range of synthetic stratigraphic architectures generated by the model accounts for all the best‐known examples of aeolian dune and interdune stratigraphic configurations documented from the stratigraphic record. Modelling results have enabled the erection of a scheme for the classification of dune system type whereby the many elaborate stratal architectures known to exist in nature can effectively be accounted for by only four parameters that are allowed to vary over space and time: dune and interdune wavelength and spacing, rate of bedform migration and rate of accumulation. Results have applied implications, including the modelling of reservoir heterogeneity and the prediction of fluid flow pathways of hydrocarbons, water, CO₂ and contaminants in subsurface reservoirs and aquifers, in which low permeability interdune units might act as baffles or barriers.     

Styles of interaction between aeolian,fluvial and shallow marine environments in the Pennsylvanian to Permian lower Cutler beds,south‐east Utah,USA

The Pennsylvanian to Permian lower Cutler beds comprise a 200 m thick mixed continental and shallow marine succession that forms part of the Paradox foreland basin fill exposed in and around the Canyonlands region of south‐east Utah. Aeolian facies comprise: (i) sets and compound cosets of trough cross‐bedded dune sandstone dominated by grain flow and translatent wind‐ripple strata; (ii) interdune strata characterized by sandstone, siltstone and mudstone interbeds with wind‐ripple, wavy and horizontal planar‐laminated strata resulting from accumulation on a range of dry, damp or wet substrate‐types in the flats and hollows between migrating dunes; and (iii) extensive, near‐flat lying wind‐rippled sandsheet strata. Fluvial facies comprise channel‐fill sandstones, lag conglomerates and finer‐grained overbank sheet‐flood deposits. Shallow marine facies comprise carbonate ramp limestones, tidal sand ridges and bioturbated marine mudstones. During episodes of sand sea construction and accumulation, compound transverse dunes migrated primarily to the south and south‐east, whereas south‐westerly flowing fluvial systems periodically punctuated the dune fields from the north‐east. Several vertically stacked aeolian sequences are each truncated at their top by regionally extensive surfaces that are associated with abundant calcified rhizoliths and bleaching of the underlying beds. These surfaces record the periodic shutdown and deflation of the dune fields to the level of the palaeo‐water‐table. During episodes of aeolian quiescence, fluvial systems became more widespread, forming unconfined braid‐plains that fed sediment to a coastline that lay to the south‐west and which ran approximately north‐west to south‐east for at least 200 km. Shallow marine systems repeatedly transgressed across the broad, low‐relief coastal plain on at least 10 separate occasions, resulting in the systematic preservation of units of marine limestone and calcarenite between units of non‐marine aeolian and fluvial strata, to form a series of depositional cycles. The top of the lower Cutler beds is defined by a prominent and laterally extensive marine limestone that represents the last major north‐eastward directed marine transgression into the basin prior to the onset of exclusively non‐marine sedimentation of the overlying Cedar Mesa Sandstone. Styles of interaction between aeolian, fluvial and marine facies associations occur on two distinct scales and represent the preserved expression of both small‐scale autocyclic behaviour of competing, coeval depositional systems and larger‐scale allocyclic changes that record system response to longer‐term interdependent variations in climatic and eustatic controlling mechanisms. The architectural relationships and system interactions observed in the lower Cutler beds demonstrate that the succession was generated by several cyclical changes in both climate and relative sea‐level, and that these two external controls probably underwent cyclical change in harmony with each other in the Paradox Basin during late Pennsylvanian and Permian times. This observation supports the hypothesis that both climate and eustasy were interdependent at this time and were probably responding to a glacio‐eustatic driving mechanism.     

Aeolian sand sea development along the mid‐Cretaceous western Tethyan margin (Spain): erg sedimentology and palaeoclimate implications

The existence of a mid‐Cretaceous erg system along the western Tethyan margin (Iberian Basin, Spain) was recently demonstrated based on the occurrence of wind‐blown desert sands in coeval shallow marine deposits. Here, the first direct evidence of this mid‐Cretaceous erg in Europe is presented and the palaeoclimate and palaeoceanographic implications are discussed. The aeolian sand sea extended over an area of 4600 km². Compound crescentic dunes, linear draa and complex aeolian dunes, sand sheets, wet, dry and evaporitic interdunes, sabkha deposits and coeval extradune lagoonal deposits form the main architectural elements of this desert system that was located in a sub‐tropical arid belt along the western Tethyan margin. Sub‐critically climbing translatent strata, grain flow and grain fall deposits, pin‐stripe lamination, lee side dune wind ripples, soft‐sediment deformations, vertebrate tracks, biogenic traces, tubes and wood fragments are some of the small‐scale structures and components observed in the aeolian dune sandstones. At the boundary between the aeolian sand sea and the marine realm, intertonguing of aeolian deposits and marine facies occurs. Massive sandstone units were laid down by mass flow events that reworked aeolian dune sands during flooding events. The cyclic occurrence of soft sediment deformation is ascribed to intermittent (marine) flooding of aeolian dunes and associated rise in the water table. The aeolian erg system developed in an active extensional tectonic setting that favoured its preservation. Because of the close proximity of the marine realm, the water table was high and contributed to the preservation of the aeolian facies. A sand‐drift surface marks the onset of aeolian dune construction and accumulation, whereby aeolian deposits cover an earlier succession of coastal coal deposits formed in a more humid period. A prominent aeolian super‐surface forms an angular unconformity that divides the aeolian succession into two erg sequences. This super‐surface formed in response to a major tectonic reactivation in the basin, and also marks the change in style of aeolian sedimentation from compound climbing crescentic dunes to aeolian draas. The location of the mid‐Cretaceous palaeoerg fits well to both the global distribution of other known Cretaceous erg systems and with current palaeoclimate data that suggest a global cooling period and a sea‐level lowstand during early mid‐Cretaceous times. The occurrence of a sub‐tropical coastal erg in the mid‐Cretaceous of Spain correlates with the exposure of carbonate platforms on the Arabian platform during much of the Late Aptian to Middle Albian, and is related to this eustatic sea‐level lowstand.     

Ancient Martian aeolian processes and palaeomorphology reconstructed from the Stimson formation on the lower slope of Aeolis Mons,Gale crater,Mars

Reconstruction of the palaeoenvironmental context of Martian sedimentary rocks is central to studies of ancient Martian habitability and regional palaeoclimate history. This paper reports the analysis of a distinct aeolian deposit preserved in Gale crater, Mars, and evaluates its palaeomorphology, the processes responsible for its deposition, and its implications for Gale crater geological history and regional palaeoclimate. Whilst exploring the sedimentary succession cropping out on the northern flank of Aeolis Mons, Gale crater, the Mars Science Laboratory rover Curiosity encountered a decametre‐thick sandstone succession, named the Stimson formation, unconformably overlying lacustrine deposits of the Murray formation. The sandstone contains sand grains characterized by high roundness and sphericity, and cross‐bedding on the order of 1 m in thickness, separated by sub‐horizontal bounding surfaces traceable for tens of metres across outcrops. The cross‐beds are composed of uniform thickness cross‐laminations interpreted as wind‐ripple strata. Cross‐sets are separated by sub‐horizontal bounding surfaces traceable for tens of metres across outcrops that are interpreted as dune migration surfaces. Grain characteristics and presence of wind‐ripple strata indicate deposition of the Stimson formation by aeolian processes. The absence of features characteristic of damp or wet aeolian sediment accumulation indicate deposition in a dry aeolian system. Reconstruction of the palaeogeomorphology suggests that the Stimson dune field was composed largely of simple sinuous crescentic dunes with a height of ca 10 m, and wavelengths of ca 150 m, with local development of complex dunes. Analysis of cross‐strata dip azimuths indicates that the general dune migration direction and hence net sediment transport was towards the north‐east. The juxtaposition of a dry aeolian system unconformably above the lacustrine Murray formation represents starkly contrasting palaeoenvironmental and palaeoclimatic conditions. Stratigraphic relationships indicate that this transition records a significant break in time, with the Stimson formation being deposited after the Murray formation and stratigraphically higher Mount Sharp group rocks had been buried, lithified and subsequently eroded.     

Hoanib River flood deposits of Namib Desert interdunes asanalogues for thin permeability barrier mudstone layers inaeolianite reservoirs

ABSTRACT The ephemeral braided Hoanib River of NW Namibia flows for a few days a year, and only high discharges enable the river to pass through interdunal depressions within the northern Namib Desert dune field to the Atlantic. The dune field comprises mainly large transverse dunes resulting from predominant SSW winds. River flood deposits between aeolian dunes are analogous to mudstone layers conformably interbedded with ancient aeolianite dune foresets. Deep floods pond laterally to considerable depths (metres to >10 m) in adjacent interdunes, depositing mud layers (1–50 cm) to considerable heights on avalanche and stoss faces of bounding dunes. Fairly passive flooding only disturbs aeolian stratification minimally. Floodwater clay infiltrates and settles as an impermeable seal, with a flood pond on top, perched, above regional groundwater. Flood ponds evaporate slowly for long periods (>3 years). Early emergence desiccates higher parts of a mud layer. Subsequent floods can refill a predecessor pond, benefiting from the existing impervious seal. Potential preservation of such mud layers is lower on the stoss face, but high on the avalanche face after burial by subsequent dune reactivation and migration. The leeward (right) Hoanib bank, a dune stoss face, is river and wind eroded to exhume fossil interdune pond mud layers of an earlier Hoanib channel. The highly inclined layers are interbedded with dune avalanche foresets and represent the edges of two successive fossil ponds exposed in plan. Ancient flood pond mudstones occur in the Permian–Triassic hydrocarbon reservoir, the Sherwood Sandstone Group of the Cheshire Basin (Kinnerton Formation) and Irish Sea Basin and were previously used erroneously to argue against the aeolian origin of cross‐bed sets. Hoanib studies show that primary river interaction with a dune field might preserve only localized erosional omission surfaces in ancient aeolianites, with little sandy barform preservation, prone to aeolian reworking. Around the main fluvial channel locus, however, flood pond mudstone layers should form a predictable halo, within which fluid permeability will decrease.     

Sedimentological analysis of a Late Quaternary coastal dune system: An example from Gopnath,south‐east Saurashtra,Western India

Coastal dune systems consisting of allochemical grains are important sedimentary archives of Pleistocene age in both of the hemispheres between the latitudes of 20° to 40°. The south Saurashtra coast in western India exhibits a large section of Middle Pleistocene aeolianites in the form of coastal cliffs, which is famous as ‘Miliolite’. Miliolites of Gopnath in south‐east Saurashtra are the oldest known coastal aeolianite deposits (age >156 ka which corresponds to Marine Isotope Stage 6) in western India. Aeolian deposits of similar ages have also been reported from the Thar Desert in north‐west India and from Southern Arabia which were largely controlled by the south‐west monsoon wind system that affects the entire belt corresponding to Sahara–Sahel, the Arabian Peninsula and north‐western India. Miliolite deposits in Gopnath are characterized by grainfall, grainflow and wind ripple laminations. At least three types of aeolian bounding surfaces have been identified. Five major facies have been identified which represent the dune and interdune relationship within the coastal aeolian system. The major dune bodies are identified as transverse dune types. The Gopnath aeolianites were deposited under dominantly dry aeolian conditions. Facies association reveals two different phases of aeolian accumulation, namely initiation of aeolian sedimentation after a prolonged hiatus and the establishment of a regularized aeolian sedimentation system. While initiation of aeolian sedimentation is marked by vast stretches of sheet sand with occasional dune bodies, the overlying thick, tabular, laterally extensive cross‐stratified units manifest regular aeolian sedimentation. However, the dune building events in Gopnath were interrupted by development of laterally extensive palaeosol horizons. Eustasy and climate exerted the major allogenic controls on the aeolian sedimentation by affecting the sediment budget as well as influencing the sedimentation pattern.     

Fluvial-aeolian interactions: Part I, modern systems

Two modern fluvial-aeolian depositional systems (Great Sand Dunes National Monument, Colorado and the Mojave River Wash, California) are remarkably similar in spite of different climates, sizes, fluvial sediment textures, and relative directions of aeolian and fluvial transport. Dune growth and migration, and deflation of blowouts create 8–10 m of local relief in unflooded aeolian landscapes. There are six prominent fluvial-aeolian interactions. (1) Fluvial flow extends into the aeolian system until it is dammed by aeolian landforms; (2) interdune areas (overbank-interdunes) upstream of aeolian dams, and alongside channels are flooded; (3) water erodes dunes alongside channels and interdunes; (4) flood waters deposit sediment in interdune areas; (5) fluvially derived groundwater floods interdunes (interdune-playas); (6) wind erodes fluvial sediment and redeposits it in the aeolian system. Unique and characteristic sediments are deposited in overbank-interdunes and in interdune-playas, reflecting alternate fluvial and aeolian processes and rapidly changing flow and salinity conditions. These fluvial-aeolian interdune deposits are characterized by irregular, concave-up bases and flat upper surfaces containing mudcracks or evaporite cement. Characteristic low-relief surfaces form in aeolian systems as an effect of flooding. Fluvial deposits are resistant to aeolian deflation. Aeolian sand is preserved when flood sediments are deposited around the bases of the dunes. Thus repetitive fluvial and aeolian aggradation tends to be ‘stepwise’ as interdune floors are suddenly raised during floods. The effects of flooding should be easy to recognize in ancient aeolianites, even beyond the area covered with overbank muds.     

Aeolian/fluvial interactions and high-resolution sequence stratigraphy of a non-marine lowstand wedge: the Avilé Member of the Agrio Formation (Lower Cretaceous), central Neuquén Basin, Argentina

Abstract Accumulation within the unconformity‐based Hauterivian Avilé Sandstone of the Neuquén Basin, Argentina, was characterized by a close interaction between fluvial and aeolian processes developed after a major relative sea‐level drop that almost completely desiccated the entire basin and juxtaposed these non‐marine deposits on shallow‐ and deep‐marine facies. Aeolian deposits within the Avilé Member include dune (A1) and sand sheet (A2) units that characterize the lower part of the unit. Fluvial deposits comprise distal flood units (F1) interbedded with aeolian dune deposits in the middle part of the succession, and low‐ (F2) and high‐sinuosity (F3) channels associated with floodplain deposits (F4) towards the top. The internal characteristics of the aeolian system indicate that its accumulation was strongly controlled by water‐table dynamics, with the development of multiple horizontal deflation super surfaces that truncate dune deposits and form the basal boundary of flood deposits and sand sheet units. A long‐term wetting‐upward trend is recorded throughout the entire unit, with an increase in fluvial activity towards the top and the development of a more permanent fluvial system overlying a major erosion surface interpreted as a sequence boundary. The upward increase in water‐table influence might be related to relative sea‐level rise, which controlled the position of the water table and allowed the accumulation of tabular aeolian units bounded by horizontal deflation surfaces. This high‐frequency, eustatically driven process acted together with a long‐term climatic change towards wetter conditions.     

Evidence for Pleistocene wet aeolian dune and interdune accumulation,S. Pedro da Maceda,north‐west Portugal

Outcrops and cored/counter‐flushed boreholes in the coastal area between Espinho and Aveiro (north‐west Portugal) were investigated to reconstruct the changing patterns of sedimentation during the Late Pleistocene–Holocene. To obtain a common comparison basis, the grain‐size data from outcrop and borehole samples were analysed. The outcrops and the cored parts of the boreholes were dated by radiocarbon and optically stimulated luminescence. The results show that, on top of pebble‐rich beds of fluvial origin, a wet aeolian dune and interdune environment was active during the later part of the Pleistocene, turning to dry aeolian at the transition to the Holocene. The data indicate also that aeolian accumulation was controlled by vegetation changes (climate) and groundwater table fluctuations. During the Holocene, a podzol formed on the Pleistocene dunes and extensive vegetation precluded major aeolian accumulations. Remobilization of sand started again because of human deforestation and – last but not least – the Little Ice Age.     

Antecedent aeolian dune topographic control on carbonate and evaporite facies: Middle Jurassic Todilto Member,Wanakah Formation,Ghost Ranch,New Mexico,USA

The Middle Jurassic Todilto Member of the Wanakah Formation is a carbonate and gypsum unit inset into the underlying aeolian Entrada Sandstone in the San Juan Basin. Field and thin section study of the uppermost Entrada and Todilto at Ghost Ranch, New Mexico, identified Todilto facies and their relationship to remnant Entrada dune topography. Results support the previous interpretation that the Entrada dunes, housed in a basin below sea level, were rapidly flooded by marine waters. Mass wasting of the dunes gave rise to sediment‐gravity flows that largely buried remnant dune topography, leaving ca 12 m of relief that defined the antecedent condition for Todilto deposition. Previously interpreted as seasonal varves deposited in a stratified water body, the Todilto is reinterpreted as a microbial biolaminite. Most diagnostic are organic‐rich laminae with structures characteristic of filamentous microbes and containing trapped aeolian silt, and clotted‐texture laminae with a fabric associated with calcification of extracellular polymeric substances. The spatial arrangement of Todilto facies is controlled by the dune palaeotopography. A continuous basal laminated mudstone thickens over the dune crest, reflecting the optimum conditions for microbial mat development, and is interpreted to have been deposited when marine waters submerged the topography. Subsequent drying caused emergence of the crestal area, and formation of tepee structures and a dissolution breccia. Gypsiferous mudflats and periodic ponds occupied the dune flanks and interdune area, with gypsum concentrated within the interdune area. Entrada sands remained unstable during Todilto deposition with common injection structures into the Todilto, and a remnant slope caused the downslope movement and folding of Todilto strata on the upper lee face. Although some expansion of the gypsum occurred in the subsurface, facies architecture fostered development of a dissolution front adjacent to the interdune gypsum body with section collapse of gypsiferous limestone on the dune flanks.     

Periodic accumulation and destruction of aeolian erg sequences in the Permian Cedar Mesa Sandstone, White Canyon, southern Utah, USA

The Permian Cedar Mesa Sandstone represents the product of at least 12 separate aeolian erg sequences, each bounded by regionally extensive deflationary supersurfaces. Facies analysis of strata in the White Canyon area of southern Utah indicates that the preserved sequences represent erg‐centre accumulations of mostly dry, though occasionally water table‐influenced aeolian systems. Each sequence records a systematic sedimentary evolution, enabling phases of aeolian sand sea construction, accumulation, deflation and destruction to be discerned and related to a series of underlying controls. Sand sea construction is signalled by a transition from damp sandsheet, ephemeral lake and palaeosol deposition, through a phase of dry sandsheet deposition, to the development of thin, chaotically arranged aeolian dune sets. The onset of the main phase of sand sea accumulation is reflected by an upward transition to larger‐scale, ordered sets which represent the preserved product of climbing trains of sinuous‐crested transverse dunes with original downwind wavelengths of 300–400 m. Regularly spaced reactivation surfaces indicate periodic shifts in wind direction, which probably occurred seasonally. Compound co‐sets of cross strata record the oblique migration of superimposed slipfaced dunes over larger, slipfaceless draa. Each aeolian sequence is capped by a regionally extensive supersurface characterized by abundant calcified rhizoliths and bioturbation and which represents the end product of a widespread deflation episode whereby the accumulation surface was lowered close to the level of the water table as the sand sea was progressively cannibalized by winds that were undersaturated with respect to their potential carrying capacity. Aeolian sequence generation is considered to be directly attributable to cyclical changes in climate and related changes in sea level of probable glacio‐eustatic origin that characterize many Permo‐Carboniferous age successions. Sand sea construction and accumulation occurred during phases of increased aridity and lowered sea level, the main sand supply being former shallow marine shelf sediments that lay to the north‐west. Sand sea deflation and destruction would have commenced at, or shortly after, the time of maximum aridity as the available sand supply became exhausted. Restricted episodes of non‐aeolian accumulation would have occurred during humid (interglacial) phases, accumulation and preservation being enabled by slow rises in the relative water table. Subsidence analysis within the Paradox Basin, together with comparisons to other similar age successions suggests that the climatic cycles responsible for generating the Cedar Mesa erg sequences could be the product of 413 000 years so‐called long eccentricity cycles. By contrast, annual advance cycles within the aeolian dune sets indicate that the sequences themselves could have accumulated in just a few hundred years and therefore imply that the vast majority of time represented by the Cedar Mesa succession was reserved for supersurface development.     

Feature: The sedimentary signature of deserts and their response to environmental change

Desert sedimentary systems comprise a variety of related sub-environments including aeolian dunes, intervening interdunes, sandsheets, salt flats, playa lakes, ephemeral fluvial systems and alluvial fans. These are highly sensitive, and undergo subtle but systematic morphological and sedimentary adjustments in response to externally-imposed environmental change. This article presents a dynamic model explaining how desert successions – particularly aeolian dune and interdune environments – are determined both by intrinsic sedimentary behaviour, such as dune migration, and by the imposition of externally-forced changes such as climate change.     

Significance of interdune deposits and bounding surfaces in aeolian dune sands

Bounding surfaces and interdune deposits provide keys for detailed interpretations of the development, shape, type, wavelength and angle of climb of aeolian bedforms, as well as overall sand sea conditions. Current alternate interpretations of bounding surfaces require very different, but testable models for sand sea deposition. Two perpendicular traverses of Jurassic Entrada Sandstone, Utah, reveal relations among cross-strata, first-order bounding surfaces, and horizontal strata. These field relations seem explicable only as the deposits of downwind-migrating, climbing, enclosed interdune basins (horizontal strata) and dune bodies consisting of superimposed smaller crescentic dunes (cross-stratified deposits). A 1.7 km traverse parallel to the palaeowind direction provides a time-transgressive view showing continuous cosets of cross-strata, first-order bounding surfaces and interdune deposits climbing downwind at an angle of a few tenths of a degree. Changes occur in the angle of climb, cross-strata structure, and interdune deposits; these reflect changes in depositional conditions through time. A 1.5 km traverse perpendicular to the palaeowind direction provides a view at an instant in geological time showing first-order bounding surfaces and interdune deposits forming flat, laterally discontinuous lenticular bodies. The distribution of interdune sedimentary structures in this traverse is very similar to that of some modern interdune basins, such as those on Padre Island, Texas. Hierarchies of bounding surfaces in an aeolian deposit reflect the bedform development on an erg. The presence of three orders of bounding surfaces indicates dune bodies consisting of smaller, super-imposed dunes. The geometry of first-order bounding surfaces is a reflection of the shape of the inter-dune basins. Second-order bounding surfaces originate by the migration of the superimposed dunes over the larger dune body and reflect individual dune shape and type. Third-order bounding surfaces are reactivation surfaces showing stages in the advance of individual dunes. The presence of only two orders of bounding surfaces indicates simple dunes. Modern and Entrada interdune deposits show a wide variety of sediment types and structures reflecting deposition under wet, damp, and dry conditions. Interdune deposits are probably the best indicators of overall erg conditions and commonly show complex vertical sequences reflecting changes in specific depositional conditions.     

The action of wind and water in a mid‐Cretaceous subtropical erg‐margin system close to the Variscan Iberian Massif,Spain

Aeolian processes and ephemeral water influx from the Variscan Iberian Massif to the mid‐Cretaceous outer back‐erg margin system in eastern Iberia led to deposition and erosion of aeolian dunes and the formation of desert pavements. Remains of aeolian dunes encased in ephemeral fluvial deposits (aeolian pods) demonstrate intense erosion of windblown deposits by sudden water fluxes. The alternating activity of wind and water led to a variety of facies associations such as deflation lags, desert pavements, aeolian dunes, pebbles scattered throughout dune strata, aeolian sandsheets, aeolian deposits with bimodal grain‐size distributions, mud playa, ephemeral floodplain, pebble‐sand and cobble‐sand bedload stream, pebble–cobble‐sand sheet flood, sand bedload stream, debris flow and hyperconcentrated flow deposits. Sediment in this desert system underwent transport by wind and water and reworking in a variety of sub‐environments. The nearby Variscan Iberian Massif supplied quartzite pebbles as part of mass flows. Pebbles and cobbles were concentrated in deflation lags, eroded and polished by wind‐driven sands (facets and ventifacts) and incorporated by rolling into the toesets of aeolian dunes. The back‐erg depositional system comprises an outer back‐erg close to the Variscan highlands, and an inner back‐erg close to the central‐erg area. The inner back‐erg developed on a structural high and is characterized by mud playa deposits interbedded with aeolian and ephemeral channel deposits. In the inner back‐erg area ephemeral wadis, desiccated after occasional floods, were mud cracked and overrun episodically by aeolian dunes. Subsequent floods eroded the aeolian dunes and mud‐cracked surfaces, resulting in largely structureless sandstones with boulder‐size mudstone intraclasts. Floods spread over the margins of ephemeral channels and eroded surrounding aeolian dunes. The remaining dunes were colonized occasionally by plants and their roots penetrated into the flooded aeolian sands. Upon desiccation, deflation resulted in lags of coarser‐grained sediments. A renewed windblown supply led to aeolian sandsheet accumulation in topographic wadi depressions. Synsedimentary tectonics caused the outer back‐erg system to experience enhanced generation of accommodation space allowing the accumulation of aeolian dune sands. Ephemeral water flow to the outer back‐erg area supplied pebbles, eroded aeolian dunes, and produced hyperconcentrated flow deposits. Fluidization and liquefaction generated gravel pockets and recumbent folds. Dune damming after sporadic rains (the case of the Namib Desert), monsoonal water discharge (Thar Desert) and meltwater fluxes from glaciated mountains (Taklamakan Desert) are three potential, non‐exclusive analogues for the ephemeral water influx and the generation of hyperconcentrated flows in the Cretaceous desert margin system. An increase in relief driven by the Aptian anti‐clockwise rotation of Iberia, led to an altitude sufficient for the development of orographic rains and snowfall which fed (melt)water fluxes to the desert margin system. Quartzite conglomerates and sands, dominantly consisting of quartz and well‐preserved feldspar grains which are also observed in older Cretaceous strata, indicate an arid climate and the mechanical weathering of Precambrian and Palaeozoic metamorphic sediments and felsic igneous rocks. Unroofing of much of the cover of sedimentary rocks in the Variscan Iberian Massif must therefore have taken place in pre‐Cretaceous times.     

Fluvial-aeolian interactions: Part II, ancient systems

An understanding of fluvial-aeolian deposition derived from modern case-examples in a previous study is applied to the Permian Cutler Formation and Cedar Mesa Sandstone on the Colorado Plateau. These formations supply an excellent three-dimensional exposure of intertonguing fluvial and aeolian strata. Four distinct facies associations form the bulk of the Cutler Formation and Cedar Mesa Sandstone: (1) aeolian dune deposits; (2) wet interdune deposits; (3) fluvial channel deposits; and (4) overbank-interdune deposits. In addition, two distinctive types of erosion surfaces are found within the Cutler Formation and Cedar Mesa Sandstone: pebble- to granule-rich erosion surfaces (aeolian deflation surfaces) and flood surfaces. Fluvial and aeolian intertonguing result in extensive tabular sheets of aeolian sandstone separated by flood surfaces and overbank-interdune deposits. Fluvial channels are associated with the deposits overlying flood surfaces and are incised into the underlying aeolian sandstones. Overbank-interdune deposits and wet interdune deposits cover flood surfaces and intertongue with overlying aeolian sandstones. The primary characteristics of ancient fluvial-aeolian deposition are overbank-interdune deposits and pronounced extensive erosion surfaces (flood surfaces), which are parallel to underlying fluvial sandstones and thus trend parallel to the palaeoslope and palaeohydrological gradient.     

What is preserved in the aeolian rock record? A Jurassic Entrada Sandstone case study at the Utah–Arizona border

Aeolian dune fields evolve from protodunes and small dunes into a pattern of progressively fewer, larger and more widely spaced dunes within limits defined by boundary conditions. However, the allogenic boundary conditions that promote aeolian dune‐field development, accumulation of strata and preservation of accumulated strata are not the same. Autogenic processes, such as dune interactions, scour‐depth variation along migrating dunes and substrate cannibalization by growing dunes, result in removal of the stratigraphic record. Moreover, dune‐field events may be collapsed into major erosional bounding surfaces. The question is what stages of evolving dune fields are represented in the rock record? This case study of ca 60 m of Jurassic Entrada Sandstone on the Utah/Arizona border (USA) defines stratigraphic intervals by gross architecture of bounding surfaces and sets of cross‐strata. The interpreted intervals in stratigraphic order consist of: (i) a lower sabkha bed that transitions upward into erosional remnants of small sets representing an initial wet aeolian system; (ii) large, compound cross‐strata representing a mature dune field; (iii) isolated scour‐fill representing negatively climbing dunes that produced ca 25 m of palaeo‐topographic relief; (iv) downlapping sets that fill the landscape‐scale relief; (v) four intervals of stacked climbing sets that each represent short periods of time; and (vi) an upper sabkha bed that again transitions into small sets representing a wet system. Accumulations appear to be associated with sediment pulses, a rising water table, and filling of scoured troughs and landscape‐scale depressions. Preservation of the accumulations is selective and associated with a rising water table, burial and subsidence. The preserved record appears remarkably incomplete. Speculation about missing strata gravitates towards cannibalization of the record of early dune‐field construction, and strata removed during the formation of bounding surfaces. This local Entrada record is thought to represent a point in the spectrum of preservation styles in the rock record.     

Stratigraphic architecture resulting from dune interactions: White Sands Dune Field,New Mexico

Aeolian dune interactions provide the dynamics for field‐scale pattern emergence and evolution within a set of boundary conditions. Although morphologies for a spectrum of dune interactions are recognized, associated stratigraphic architectures are unknown and have probably been misidentified in the rock record. A unique data set for the White Sands Dune Field in New Mexico (USA) allowed for a detailed analysis in which the morphological evolution of defect and bedform repulsion interactions is chronicled over a decadal time‐series of images and coupled with the resulting stratigraphic architecture, documented from cross‐strata exposed in interdune areas and ground‐penetrating radar imaging of dune interiors. Defect and bedform repulsions represent a class of interactions in which the faster‐migrating dune termination or defect (defect repulsion), or pair of defects (bedform repulsion), collides with the target dune downwind. Results document that during the collision, the defect(s) of the impactor dune recombine(s) with a segment of the target dune, and the redundant target dune segment is ejected as a parabolic‐shaped ejecta dune. The ejecta dune assumes a more barchanoid shape as it migrates downwind. The interaction architecture consists of lateral truncation of the target set by an interaction bounding surface. Defect cross‐strata tangentially approach the surface in plan‐view, and downlap onto the surface in cross‐section. The orientation of the defect cross‐strata is at an acute angle to the trend of the interaction surface. Orientations of the defect cross‐strata, which represent the defect approach angle, and the target dune cross‐strata, which represent the general dune migration direction, diverge at a high angle. Defect cross‐strata typically consist of wind‐ripple laminae, in contrast to the target set that may house grainflow cross‐strata. In the transport direction, the erosional interaction surface curves to become subparallel to subjacent and superjacent cross‐strata where the defect and target unify into a single lee face.     

Karst subsidence as a control on the accumulation and preservation of aeolian deposits: A Pleistocene example from a proglacial outwash setting,Ebro Basin,Spain

Meltwater flows emanating from the Pyrenees during the Pleistocene constructed a braided outwash plain in the Ebro Basin and led to the karstification of the Neogene gypsum bedrock. Synsedimentary evaporite dissolution locally increased subsidence rates and generated dolines and collapses that enabled the accumulation and preservation of outwash gravels and associated windblown deposits that were protected from erosion by later meltwater flows. In these localized depocentres, maximum rates of wind deceleration resulted from airflow expansion, enabling the accumulation of cross‐stratified sets of aeolian strata climbing at steep angles and thereby preserving up to 5 m thick sets. The outwash plain was characterized by longitudinal and transverse fluvial gravel bars, channels and windblown facies organized into aeolian sand sheets, transverse and complex aeolian dunes, and loess accumulations. Flat‐lying aeolian deposits merge laterally to partly deformed aeolian deposits encased in dolines and collapses. Synsedimentary evaporite dissolution caused gravels and aeolian sand deposits to subside, such that formerly near‐horizontal strata became inclined and generated multiple internal angular unconformities. During episodes when the wind was undersaturated with respect to its potential sand transporting capacity, deflation occurred over the outwash plain and coarse‐grained lags with ventifacts developed. Subsequent high‐energy flows episodically reached the aeolian dune field, leading to dune destruction and the generation of hyperconcentrated flow deposits composed in part of reworked aeolian sands. Lacustrine deposits in the distal part of the outwash plain preserve rhythmically laminated lutites and associated Gilbert‐type gravel deltas, which developed when fluvial streams reached proglacial lakes. This study documents the first evidence of an extensive Pleistocene proglacial aeolian dune field located in the Ebro Basin (41˙50° N), south of what has hitherto been considered to be the southern boundary of Pleistocene aeolian deposits in Europe. A non‐conventional mechanism (evaporite karst‐related subsidence) for the preservation of aeolian sands in the stratigraphic record is proposed.