An investigation into the fault patterns in the Chadegan region, west Iran: Evidence for dextral brittle transpressional tectonics in the Sanandaj-Sirjan Zone

The NW-SE trending Sanandaj-Sirjan Zone (SSZ) is the internal part of the Zagros continental collision zone, which mainly consists of metamorphic rocks deformed in a dextral transpressional zone. This dextral transpression is attributed to brittle deformation related to late Cenozoic Arabia-Eurasia oblique continental collision. Major NW-trending faults, including the Dalan, Garmdareh, Yasechah, Sheida, and Ben faults, are reverse faults with a dextral strike-slip component. These faults were displaced by NW-trending synthetic and NE-trending antithetic faults. There are also E-trending thrusts and N-trending normal faults developing in directions that are, respectively, almost normal and parallel to the major shortening direction. The NW-trending Ben, Yasechah, and Sheida faults are NE-dipping faults, and the Dalan and Garmdareh faults are SW-dipping faults. These faults indicate the presence of a transpressive flower structure zone that probably led to the exhumation of Jurassic high-grade metamorphic rocks, such as eclogite, in the central part of the study area.     

Role of the Kazerun fault system in active deformation of the Zagros fold-and-thrust belt (Iran)

Field structural and SPOT image analyses document the kinematic framework enhancing transfer of strike-slip partitioned motion from along the backstop to the interior of the Zagros fold-and-thrust belt in a context of plate convergence slight obliquity. Transfer occurs by slip on the north-trending right-lateral Kazerun Fault System (KFS) that connects to the Main Recent Fault, a major northwest-trending dextral fault partitioning oblique convergence at the rear of the belt. The KFS formed by three fault zones ended by bent orogen-parallel thrusts allows slip from along the Main Recent Fault to become distributed by transfer to longitudinal thrusts and folds. To cite this article: C. Authemayou et al., C. R. Geoscience 337 (2005).     

南中国海成因:右行拉分作用与左行转换挤压作用交替

总结分析了南中国海各次级盆地及其周缘有关盆地的裂谷作用序列 ,认为它们的裂谷作用序列是相似的 ,虽然存在局部差异。古近纪 (—早中新世 )和新近纪分别为一级裂谷阶段和后裂谷阶段 ,并可进一步划分次一级裂谷和后裂谷阶段。南中国海总体几何学特征及其次级盆地和周缘盆地的几何学特征表明 ,它们的裂谷作用是以近南北向主断裂为主剪切的右行拉分作用。在右行拉分过程中 ,东越南断裂的南延 (翼他陆架部分 )可能没有发生巨大脆性平移而表现为巨大的右行韧性牵引 ;印支—苏门答腊地块是被东越南断裂、东安达曼海断裂、红河断裂和苏门答腊断裂等四条断裂围限的呈菱形的右行走滑双重构造。深海盆的洋壳在许多方面与概念化大洋洋壳不同 ,相互矛盾的各种磁异常条带年龄并不可信。它的洋壳是右行拉分作用形成的洋壳。它们的后裂谷作用是以近南北向主断裂为主剪切的左行转换挤压反转变形为特征。联系到裂谷作用序列 ,南中国海成因具有右行拉分作用、裂谷作用和左行转换挤压作用交替出现的特征 ,表现了具有转换性质的“开”与“合”的更迭     

Detailed fault structure of the Tarutung Pull-Apart Basin in Sumatra,Indonesia, derived from local earthquake data

The Tarutung Basin is located at a right step-over in the northern central segment of the dextral strike-slip Sumatran Fault System (SFS). Details of the fault structure along the Tarutung Basin are derived from the relocations of seismicity as well as from focal mechanism and structural geology. The seismicity distribution derived by a 3D inversion for hypocenter relocation is clustered according to a fault-like seismicity distribution. The seismicity is relocated with a double-difference technique (HYPODD) involving the waveform cross-correlations. We used 46,904 and 3191 arrival differences obtained from catalogue data and cross-correlation analysis, respectively. Focal mechanisms of events were analyzed by applying a grid search method (HASH code). Although there is no significant shift of the hypocenters (10.8 m in average) and centroids (167 m in average), the application of the double difference relocation sharpens the earthquake distribution. The earthquake lineation reflects the fault system, the extensional duplex fault system, and the negative flower structure within the Tarutung Basin. The focal mechanisms of events at the edge of the basin are dominantly of strike-slip type representing the dextral strike-slip Sumatran Fault System. The almost north–south striking normal fault events along extensional zones beneath the basin correlate with the maximum principal stress direction which is the direction of the Indo-Australian plate motion. The extensional zones form an en-echelon pattern indicated by the presence of strike-slip faults striking NE–SW to NW–SE events. The detailed characteristics of the fault system derived from the seismological study are also corroborated by structural geology at the surface.     

Systematic changes in orientation of linear mylonitic fabrics: An example of strain partitioning during transpressional deformation in north Golpaygan,Sanandaj–Sirjan zone,Iran

Kilometer-scale, shallowly dipping, NW-striking top-to-the NE reverse and dextral strike-slip shear zones occur in metamorphic rocks of north Golpaygan. These metamorphic rocks are exposed at the NE margin of the central part of the Sanandaj–Sirjan zone in the hinterland of the Zagros orogen. NW-striking top-to-the NE normal shear zones were also found in a small part of the study area. Structural evidence of three deformation stages were found. Pre-mylonitization metamorphic mineral growth happened during D₁. The main mylonitization event was during the D₂ deformational event, following coaxial refolding, synchronous to retrograde metamorphism of amphibolite to greenschist facies in the Late Cretaceous–Paleocene, and before D₃ folding and related mylonitization. We documented the systematic changes in the orientations of D₂ linear fabrics especially stretching lineations and superimposition relations of structures. It is concluded that the dextral strike-slip and dip-slip shear zones were coeval kinematic domains of partitioned dextral transpression. The shallowly dipping reverse and strike-slip shear zones are compatible with partitioning in a very inclined transpressional model. Fabric relations reflect that the top-to-the NE normal shear zones were not produced during deformation partitioning of inclined dextral transpression. The Late Cretaceous–Paleocene strain partitioning was followed by later N–S shortening and NE-extension in the north Golpaygan area.     

Cretaceous deformation history of the middle Tan-Lu fault zone in Shandong Province, eastern China

Based on field analysis of fault-slip data from different rock units of the Cretaceous basins along the middle part of the Tan-Lu fault zone (Shandong Province, eastern China), we document polyphase tectonic stress fields and address the changes in sense of motion of the Tan-Lu fault zone during the Cretaceous. The Cretaceous deformation history of the Tan-Lu fault zone can be divided into four main stages. The first stage, during the earliest Cretaceous, was dominated by N-S extension responsible for the formation of the Jiaolai basin. We interpret this extension to be related to dextral strike-slip pull-apart opening guided by the Tan-Lu fault zone. The second stage, during the middle Early Cretaceous, was overwhelmingly rift-dominated and characterized by widespread silicic to intermediate volcanism, normal faulting and basin subsidence. It was at this stage that the Tan-Lu-parallel Yi-Shu Rift was initiated by E-W to WNW-ESE extension. The tectonic regime then changed during the late Early Cretaceous to NW-SE-oriented transpression, causing inversion of the Early Cretaceous rift basin and sinistral slip along the Tan-Lu fault zone. During the Late Cretaceous, dextral activation of the Tan-Lu fault zone resulted in pull-apart opening of the Zhucheng basin, which was subsequently deformed by NE-SW compression. This deformation chronology of the Tan-Lu fault zone and the associated Cretaceous basins allow us to constrain the regional kinematic models as related to subduction along the eastern margin of Asia, or related to collision in the Tibet region.     

Discussion of tectonic models for Cenozoic strike-slip fault-affected continental margins of mainland SE Asia

Understanding the roles of Cenozoic strike-slip faults in SE Asia observed in outcrop onshore, with their offshore continuation has produced a variety of structural models (particularly pull-apart vs. oblique extension, escape tectonics vs. slab-pull-driven extension) to explain their relationships to sedimentary basins. Key problems with interpreting the offshore significance of major strike-slip faults are: (1) reconciling conflicting palaeomagnetic data, (2) discriminating extensional, and oblique-extensional fault geometries from strike-slip geometries on 2D seismic reflection data, and (3) estimating strike-slip displacements from seismic reflection data.Focus on basic strike-slip fault geometries such as restraining vs. releasing bends, and strongly splaying geometries approach the gulfs of Thailand and Tonkin, suggest major strike-slip faults probably do not extend far offshore Splays covering areas 10,000’s km² in extent are characteristic of the southern portions of the Sagaing, Mae Ping, Three Pagodas and Ailao Shan-Red River faults, and are indicative of major faults dying out. The areas of the fault tips associated with faults of potentially 100 km+ displacement, scale appropriately with global examples of strike-slip faults on log–log displacement vs. tip area plots. The fault geometries in the Song Hong-Yinggehai Basin are inappropriate for a sinistral pull-apart geometry, and instead the southern fault strands of the Ailao Shan-Red River fault are interpreted to die out within the NW part of the Song Hong-Yinggehai Basin. Hence the fault zone does not transfer displacement onto the South China Seas spreading centre. The strike-slip faults are replaced by more extensional, oblique-extensional fault systems offshore to the south. The Sagaing Fault is also superimposed on an older Paleogene–Early Miocene oblique-extensional rift system. The Sagaing Fault geometry is complex, and one branch of the offshore fault zone transfers displacement onto the Pliocene-Recent Andaman spreading centre, and links with the West Andaman and related faults to form a very large pull-apart basin.     

Analysis of structural deformation in the North Dabashan thrust belt,South Qinling,central China

The North Dabashan thrust belt, which is located in South Qinling, is bounded by the Ankang fault on the north and the Chengkou–Fangxian fault on the south. The North Dabashan thrust belt experienced multiple stages of structural deformation that were controlled by three palaeostress fields. The first structural event (Middle Triassic) involved NNW–SSE shortening and resulted in the formation of numerous dextral strike-slip structures along the entire Chengkou–Fangxian fault zone and within the North Dabashan thrust belt, which suggests that the South China Block moved to the NW and was obliquely subducted under the North China Block. The second structural event (Late Triassic–Early Jurassic) involved NE–SW shortening that formed NW–SE-trending structures in the North Dabashan thrust belt. The third structural event (Late Jurassic–Early Cretaceous) involved ENE–WSW or nearly E–W shortening and resulted in additional thrusting of the North Dabashan thrust belt to the WSW and formation of the WSW-convex Chengkou–Fangxian fault zone, which has an oroclinal shape. Owing to the pinning of the Hannan massif and Shennongjia massif culminations, numerous sinistral strike-slip structures developed along the eastern Chengkou–Fangxian fault zone and were superimposed over the early dextral strike-slip structures.     

Variations in the kinematics of deformation along the Zagros inclined transpression zone,Iran: Implications for defining a curved inclined transpression zone

The combination of inclined collision and plate boundary shape can control the nature of deformation and the sense of shear along a transpression zone. The present study investigated the effects of a boundary zone with curvilinear shape along a transpression zone on the kinematics of deformation. The kinematics of the Zagros transpression zone varies with the orientation of the zone boundary. Detailed structural and microstructural studies showed sinistral sense of shear on the southeastern part of the Zagros inclined transpression zone (Fars Arc), but dextral sense of shear on the northwestern part of the zone. It is inferred that the both senses of shear were developed coevally under a bulk general shear, regional-scale deformation along a curved inclined transpression miming the shape of the Fras Arc of the Zagros and the reentrant of the Bandar Abbas Syntaxis. The Zagros transpression zone formed by inclined continental collision between the Afro-Arabian continent and Iranian microcontinent.     

Active faults in the Zagros and central Iran

Active tectonic movements in the northwestern Zagros include right lateral slip at the rate of about 10 mm/a along the Main Recent Fault, which inherits the position of the Main Thrust, now inactive, and active thrusting and accompanying folding distributed between several zones southwest of the Main Recent Fault. In the southeastern Zagros (the Fars Province), there are several right lateral faults that extend N–S obliquely to the overall trend of the Zagros fault-and-fold belt. These may be either branches of the Main Recent Fault, or faults accommodating relative broadening of the outer Zagros in its southeastern segment. The Main Thrust in the southeastern Zagros also remains inactive.

The Ipak, North Tehran, and Mosha fault zones and several minor structures in the eastern Alborz form the E–W-trending active fault system with combined reverse and left lateral slip. On the Ipak and Mosha zones, lateral movements with the late Quaternary mean rate exceeding 1 mm/a dominate over vertical fault movements. Together with right lateral faults stretching northeast of Zagros, the faults of the Alborz may accommodate east-directed motion of the Iranian microplate.     

Morphological and microtectonic analysis of Quaternary deformation from Puná and Santa Clara Islands, Gulf of Guayaquil, Ecuador (South America)

This paper presents the neotectonic study of Santa Clara and Puná Islands sited in the Gulf of Guayaquil eastern part. Both islands are located on the south-western segment of the fault zone bounding to the east the North Andean Block. Fault motion and morphostructural analysis were carried out from Pleistocene age terrain. A two step deformation characterises the South Puná tectonics. The first step involves the Zambapala Cordillera uplift that post-dates Pleistocene sediments and pre-dates a marine terrace correlated with the M.I.S. 11 or 13 (440–550 ka). The second step is the formation of a pull-apart that shows evidence of 2.9 km dextral offset since the M.I.S. 11 or 13, giving an offset mean rate of 5.3 to 6.6 mm/yr. This rate is higher than the one calculated on the Pallatanga Fault northeast of the study area, in the Western Andean Cordillera, suggesting that deformation is split in different fault segments from the Gulf of Guayaquil to the continent. The Zambapala Cordillera uplift and transpression deformation requires a compressive event that may have been induced by the subduction process during the early Pleistocene.     

The geology of the giant Nyankanga gold deposit,Geita Greenstone Belt,Tanzania

Nyankanga is the largest gold deposit in the Geita Greenstone Belt of the northern Tanzania Craton. The deposit is hosted within an Archean volcano-sedimentary package dominated by ironstones and intruded by a large diorite complex, the Nyankanga Intrusive Complex. The supracrustal package is now included within the intrusive complex as roof pendants. The ironstone fragments contain evidence of multiple folding events that occurred prior to intrusion. The supracrustal package and Nyankanga Intrusive Complex are cut by a series of NE–SW trending, moderately NW dipping fault zones with a dominant reverse component of movement but showing multiple reactivation events with both oblique and normal movement components. The deposit is cut by a series of NW trending strike slip faults and ~ E–W trending late normal faults. The Nyankanga Fault Zone is a major NW dipping deformation zone developed mainly along the ironstone–diorite contacts that is mineralised over its entire length. The gold mineralization is hosted within the damage zone associated with Nyankanga Fault Zone by both diorite and ironstone with higher grades typically occurring in ironstone. Ore shoots dip more steeply than the Nyankanga Fault Zone. The mineralization is associated with sulfidation fronts and replacement textures in ironstones and is mostly contained as disseminated sulphides in diorite. The close spatial relationship between gold mineralization and the ironstone/diorite contact suggests that the reaction between the mineralising fluid and iron rich lithotypes played an important role in precipitating gold. Intense brecciation and veining, mainly in the footwall of Nyankanga Fault Zone, indicates that the fault zone increased permeability and allowed the access of mineralising fluids. The steeper dip of the ore shoots is consistent with mineralization during normal reactivation of the Nyankanga Fault Zone.     

Caractérisation géométrique et cinématique des structures liées aux phases compressives de l'Éocène au Quaternaire inférieur en Tunisie : exemple de la Tunisie nord-orientale

During Eocene to Early Quaternary period, three compressive tectonic phases are recognized in Northeast Tunisia: a NW–SE to north–south phase during the Late Eocene, a N120-to-N140 phase in the Late Miocene, and a NW–SE to north–south phase in the Plio-Early Quaternary. The first Eocene phase has built NE–SW folds and remobilised east–west-to-N120 and NE–SW faults with a reverse component. The second Miocene phase is characterized by east–west-to-N120 faults with a normal component and NE–SW folds. The third phase occurred during the Plio-Early Quaternary has edified NE–SW folds associated with east–west-to-N120 dextral reverse strike-slip faults and NE–SW faults with a reverse component. To cite this article: H. Mzali, H. Zouari, C. R. Geoscience 338 (2006).     

The Erzincan earthquake of 13 March 1992 in Eastern Turkey: tectonic aspects

The tectonic significance of the Erzincan earthquake of 13 March, 1992 in Eastern Turkey is discussed. The intersection of the North Anatolian and The East Anatolian strike-slip fault zones has resulted in formation of the Erzincan pull-apart basin and new seismically active fault branches on its northeastern side. Local concentrations of surface ruptures strike along the most active branches of the North Anatolian fault zone (N300W) for 62 km. They are usually open fractures with northeastern sides uplifted up to 20 cm and rarely with dextral offset up to 10 cm. These secondary ruptures manifest indirectly oblique seismic fault displacement corresponding to the Late Quaternary motion on the fault zone, although at the surface the dextral component has been suppressed relative to the vertical one.     

Closing-up structures, alternatives to pull-apart basins; the effect of bends in the North Anatolian Fault, Turkey

Fault blocks passing bends or stepovers in a fault zone must adapt their margins to the uneven fault trace. Two cases of adaption are distinguished for extensional bends or stepovers (transtension): (1) The fault margins close up behind a single bend ('knickpoint') of a strike-slip fault and a 'closing-up structure' (new term) arises or (2) fault-block margins are extended behind a releasing bend (double bend) or stepover parallel to the displacement and a pull-apart basin originates. The dosing up described here is accomplished by acute-angled synthetic strike-slip faults that dissect the straight fault in front of a knickpoint to form a zig-zag block boundary behind it. Crustal extension is also involved in the closing-up structure, but in a different way from typical pull-apart basins.
The closing-up structure illustrated was developed behind an extensional knickpoint in the North Anatolian Fault west of Lake Abant, NW Turkey, where the process of closing up continues to this day. The kinematic model of this closing-up structure is supported by displacements and ruptures observed during the 1967 Mudurnu valley earthquake and the 1957 Abant earthquake.     

南京湖山地区大石碑断层性质及成因探讨

南京湖山地区大石碑断层位于大石碑向斜北西翼,在北东方向人工开采的剖面上表现为正断层性质。通过对大石碑 断层及其附近断层和节理的构造要素测量分析、构造应力场求解等研究,文章认为该断层以右行平移断层为主,兼有正断 层的性质。印支期该区在北西-南东方向挤压构造应力场作用下,形成北东方向的褶皱（宁镇山脉）、北西方向的右行平移 断层和北北西方向左行平移断层,其中北西方向的右行平移断层在北东方向的剖面上表现出正断层的假象,是断层效应的 一个典型教学实例。     

Delineation of lithostructural domains in northern Orissa (India) from Landsat Thematic Mapper imagery

Image-based reconnaissance geological mapping at 1:100,000 scale using Landsat TM data has delineated a college of Precambrian lithostructural domains within a 50,000-km² region which encompasses the northern portion of the Archaean to Proterozoic granulite-grade Eastern Ghats Tectonic Province and the adjacent Archaean-Mesoproterozoic Singhbhum Craton. The domains identified in the present study display distinctive internal structures on satellite imagery. Most are bounded by clearly recognisable major shear zones and faults on imagery; displacement directions may frequently be ascertained through local reorientation of planar structures adjacent to large strike-slip shear zones and through juxtaposition of domains with different structuring.

The macroscopic/megascopic structural overview provided by the Landsat interpretation, supported by preliminary field investigation, suggests that the N-S shortening (E-W fold/thrust packages with associated NE and NW strike-slip faulting), is the dominant structural style in the northernmost part of the Eastern Ghats Tectonic Province, followed by regional dextral transpression, expressed in the form of major strike-slip faults. The largest of these structures (Kerajang Fault), which may be traced for over 250 km, has demonstrable Paleozoic-Mesozoic dextral motion associated with coal basin formation. A precursor Kerajang shear zone with dextral movement in excess of 100 km of indeterminate age may also have been instrumental in juxtaposing the Singhbhum Nucleus into its present position to the north of the Eastern Ghats Tectonic Province.     

准噶尔盆地西北缘达尔布特断裂的运动学特征

达尔布特断裂是准噶尔盆地西北缘的边界断裂,本文通过大量的野外地质调查并结合遥感解译,发现该断裂具有明显的左行走滑特征,其最大位错量出现在其西南段,达到60 km左右。根据野外的观察,达尔布特断裂是一条经历过多期变形的断裂,运动学特征指示了该断裂的各期活动均为左行走滑。它与准噶尔盆地东北缘北西-南东向的右行走滑断裂一起,构成了一组共轭断裂系,是印欧板块碰撞造成青藏高原强烈抬升并向北扩展的远程效应,同时也受到西伯利亚板块向南运动的影响。和什托洛盖盆地是在断裂走滑过     

Structural evolution of the Piqiang Fault Zone,NW Tarim Basin,China

The Piqiang Fault is a prominent strike-slip (tear) fault that laterally partitions the Keping Shan Thrust Belt in the NW Tarim Basin, China. In satellite images, the Piqiang Fault appears as a sharp, NW-trending lineament that can be traced for more than 70 km. It is oblique to the general structural trend of the thrust belt and subparallel to the thrust transport direction. This paper presents a structural analysis of the Piqiang Fault, based on satellite image interpretation and field data. A net loss of Late Paleozoic sediment across the fault zone implies that it was initiated as a major normal fault during the Early Permian, and corresponds to widespread extension and magmatism during this period. Differential erosion across the fault resulted in the subsequent removal of sediment from the east relative to the west. During the Middle to Late Cenozoic, contraction of the NW Tarim Basin and the formation of the Keping Shan Thrust Belt resulted in reactivation of the Piqiang Fault as a strike-slip (tear) fault. The fault has accommodated lateral differences in thrust density and spacing which have arisen due to the abrupt, pre-existing change in stratigraphic thickness across it. The Piqiang Fault provides an insight into the formation of oblique, strike-slip (tear) faults in contractional belts and demonstrates the importance of inherited basement structures in such settings.     

Geological and archaeological evidence of active faulting on the Martana Fault (Umbria–Marche Apennines,Italy) and its geodynamic implications

This paper examines the morphotectonic and structural–geological characteristics of the Quaternary Martana Fault in the Umbria–Marche Apennines fold‐and‐thrust belt. This structure is more than 30 km long and comprises two segments: a N–NNW‐trending longer segment and a 100°N‐trending segment. After developing as a normal fault in Early Pleistocene times, the N–NNW Martana Fault segment experienced a phase of dextral faulting extending from the Early to Middle Pleistocene boundary until around 0.39 Ma, the absolute age of volcanics erupted in correspondence to releasing bends. The establishment of a stress field with a NE–ENE‐trending σ₃ axis and NW–NNW σ₁ axis in Late Pleistocene to Holocene times resulted in a strong component of sinistral faulting along N–NNW‐trending fault segments and almost pure normal faulting on newly formed NW–SE faults. Fresh fault scarps, the interaction of faulting with drainage systems and displacement of alluvial fan apexes provide evidence of the ongoing activity of this fault. The active left‐lateral kinematic along N–NNW‐trending fault segments is also revealed by the 1.8 m horizontal offset of the E–W‐trending Decumanus road, at the Roman town of Carsulae. We interpret the present‐day kinematics of the Martana Fault as consistent with a model connecting surface structures to the inferred north‐northwest trending lithospheric shear zone marking the western boundary of the Adria Plate. Copyright © 2003 John Wiley & Sons, Ltd.