Convective-conductive transitions and sensitivity of a convecting ice shell to perturbations in heat flux and tidal-heating rate: Implications for Europa

We investigate the response of conductive and convective ice shells on Europa to variations of heat flux and interior tidal-heating rate. We present numerical simulations of convection in Europa's ice shell with Newtonian, temperature-dependent viscosity and tidal heating. Modest variations in the heat flux supplied to the base of a convective ice shell, ΔF, can cause large variations of the ice-shell thickness Δδ. In contrast, for a conductive ice shell, large ΔF involves relatively small Δδ. We demonstrate that, for a fluid with temperature-dependent viscosity, the heat flux undergoes a finite-amplitude jump at the critical Rayleigh number Racr. This jump implies that, for a range of heat fluxes relevant to Europa, two equilibrium states—corresponding to a thin, conductive shell and a thick, convective shell—exist for a given heat flux. We show that, as a result, modest variations in heat flux near the critical Rayleigh number can force the ice shell to switch between the thin, conductive and thick, convective configurations over a ∼10⁷-year interval, with thickness changes of up to ∼10-30 km. Depending on the orbital and thermal history, such switches might occur repeatedly. However, existing evolution models based on parameterized-convection schemes have to date not allowed these transitions to occur. Rapid thickening of the ice shell would cause radial expansion of Europa, which could produce extensional tectonic features such as fractures or bands. Furthermore, based on interpretations for how features such as chaos and ridges are formed, several authors have suggested that Europa's ice shell has recently undergone changes in thickness. Our model provides a mechanism for such changes to occur.     

Thermal and topographic tests of Europa chaos formation models from Galileo E15 observations

Stereo topography of an area near Tyre impact crater, Europa, reveals chaos regions characterised by marginal cliffs and domical topography, rising to 100-200 m above the background plains. The regions contain blocks which have both rotated and tilted. We tested two models of chaos formation: a hybrid diapir model, in which chaos topography is caused by thermal or compositional buoyancy, and block motion occurs due to the presence of near-surface (1-3 km) melt; and a melt-through model, in which chaos regions are caused by melting and refreezing of the ice shell. None of the hybrid diapir models tested generate any melt within 1-3 km of the surface, owing to the low surface temperature. A model of ocean refreezing following melt-through gives effective elastic thicknesses and ice shell thicknesses of 0.1-0.3 and 0.5-2 km, respectively. However, for such low shell thicknesses the refreezing model requires implausibly large lateral density contrasts (50-100 kg m⁻³) to explain the elevation of the centres of the chaos regions. Although a global equilibrium ice shell thickness of ≈2 km is possible if Europa's mantle resembles that of Io, it is unclear whether local melt-through events are energetically possible. Thus, neither of the models tested here gives a completely satisfactory explanation for the formation of chaos regions. We suggest that surface extrusion of warm ice may be an important component of chaos terrain formation, and demonstrate that such extrusion is possible for likely ice parameters.     

Heat flow, lenticulae spacing, and possibility of convection in the ice shell of europa

Two opposing models to explain the geological features observed on Europa’s surface have been proposed. The thin-shell model states that the ice shell is only a few kilometers thick, transfers heat by conduction only, and can become locally thinner until it exposes an underlying ocean on the satellite’s surface. According to the thick-shell model, the ice shell may be several tens of kilometers thick and have a lower convective layer, above which there is a cold stagnant lid that dissipates heat by conduction. Whichever the case, from magnetic data there is strong support for the presence of a layer of salty liquid water under the ice. The present study was performed to examine whether the possibility of convection is theoretically consistent with surface heat flows of ∼100-200 mW m⁻², deduced from a thin brittle lithosphere, and with the typical spacing of 15-23 km proposed for the features usually known as lenticulae. It was obtained that under Europa’s ice shell conditions convection could occur and also account for high heat flows due to tidal heating of the convective (nearly isothermal) interior, but only if the dominant water ice rheology is superplastic flow (with activation energy of 49 kJ mol⁻¹; this is the rheology thought dominant in the warm interior of the ice shell). In this case the ice shell would be ∼15-50 km thick. Furthermore, in this scenario explaining the origin of the lenticulae related to convective processes requires ice grain size close to 1 mm and ice thickness around 15-20 km.     

On convection in ice I shells of outer Solar System bodies, with detailed application to Callisto

It has been argued that the dominant non-Newtonian creep mechanisms of water ice make the ice shell above Callisto's ocean, and by inference all radiogenically heated ice I shells in the outer Solar System, stable against solid-state convective overturn. Conductive heat transport and internal melting (oceans) are therefore predicted to be, or have been, widespread among midsize and larger icy satellites and Kuiper Belt objects. Alternatively, at low stresses (where non-Newtonian viscosities can be arbitrarily large), convective instabilities may arise in the diffusional creep regime for arbitrarily small temperature perturbations. For Callisto, ice viscosities are low enough that convection is expected over most of geologic time above the internal liquid layer for plausible ice grain sizes (?a few mm); the alternative for early Callisto, a conducting shell over a very deep ocean (>450 km), is not compatible with Callisto's present partially differentiated state. Moreover, if convection is occurring today, the stagnant lid would be quite thick (∼100 km) and compatible with the lack of active geology. Nevertheless, Callisto's steady-state heat flow may have fallen below the convective minimum for its ice I shell late in Solar System history. In this case convection ends, the ice shell melts back at its base, and the internal ocean widens considerably. The presence of such an ocean, of order 200 km thick, is compatible with Callisto's moment-of-inertia, but its formation would have caused an ∼0.25% radial expansion. The tectonic effects of such a late, slow expansion are not observed, so convection likely persists in Callisto, possibly subcritically. Ganymede, due to its greater size, rock fraction and full differentiation, has a substantially higher heat flow than Callisto and has not reached this tectonic end state. Titan, if differentiated, and Triton should be more similar to Ganymede in this regard. Pluto, like Callisto, may be near the tipping point for convective shutdown, but uncertainties in its size and rock fraction prevent a more definitive assessment.     

Fracture penetration in planetary ice shells

The proposed past eruption of liquid water on Europa and ongoing eruption of water vapor and ice on Enceladus have led to discussion about the feasibility of cracking a planetary ice shell. We use a boundary element method to model crack penetration in an ice shell subjected to tension and hydrostatic compression. We consider the presence of a region at the base of the ice shell in which the far-field extensional stresses vanish due to viscoelastic relaxation, impeding the penetration of fractures towards a subsurface ocean. The maximum extent of fracture penetration can be limited by hydrostatic pressure or by the presence of the unstressed basal layer, depending on its thickness. Our results indicate that Europa's ice shell is likely to be cracked under 1-3 MPa tension only if it is ?2.5 km thick. Enceladus' ice shell may be completely cracked if it is capable of supporting ∼1-3 MPa tension and is less than 25 km thick.     

Pits and uplifts on Europa

A survey of depression and uplift features on Europa, based on Galileo regional mapping images, shows that these features come in a wide range of sizes, with numbers increasing greatly with decreasing size, down to the limits of resolution. Size distributions are similar in the northern leading and southern trailing hemispheres, where they are distinctly different from the southern leading and northern trailing hemispheres, suggesting an oblique, antipodal symmetry pattern, similar to that of chaotic and tectonic terrain. This pattern is suggestive of polar wander. Uplifts are usually polygonal or irregular in shape and rarely are cracked. Patches of chaotic terrain, which we had surveyed earlier, are not included in the current study because their topography is generally unclear, and because there is no a priori known genetic linkage with the pits and uplifts.These results contradict generalizations based on the earlier “pits, spots, and domes” (PSD) taxonomy. Most of the type examples for PSDs were simply patches of chaotic terrain selected from a limited portion of their full size range. The use of the term lenticula to collectively describe PSDs is inconsistent with the IAU definition of lenticula: a small dark spot seen at low resolution. Pits and uplifts do not correlate with lenticulae, although chaos often does. Properties of PSDs that have been widely cited as primary evidence for convective upwelling in thick ice (e.g., that uplifts are generally dome-shaped and often cracked; that pits and domes are regularly spaced; that there is a typical diameter of ∼10 km) were premature and not supported by subsequent data. Most pits and uplifts are less than 10 km across so, if they formed by diapirism or convective upwelling, the sources must have been very shallow, less than 5 km deep. How they actually formed remains unknown.     

Seas under ice: Stability of liquid-water oceans within icy worlds

The present-day existence of internal oceans under the outer ice shell of several icy satellites of the Solar System has been recently proposed. The presence of antifreeze substances decreasing ice’s melting point (and tidal heating in Europa’s case) has been generally believed to allow the stability of such oceans; limited cooling of the water (ice plus liquid) layer, due to stability against convection or to stagnant lid convection in the icy shell, have been also considered. Here we propose that even pure liquid-water oceans could survive today within several icy worlds, and we consider some factors affecting thermal modeling in these bodies. So, the existence of such oceans would be a natural consequence of the physical properties of water ice, independently from the addition of antifreeze substances or any other special conditions. The inclusion of these substances would contribute to expand the conditions for water to stay liquid and to increase ocean’s volume.     

Resurfacing history of Europa from pole-to-pole geological mapping

We produced geologic maps from two regional mosaics of Galileo images across the leading and trailing hemispheres of Europa in order to investigate the temporal distribution of units in the visible geologic record. Five principal terrain types were identified (plains, bands, ridges, chaos, and crater materials), which are interpreted to result from (1) tectonic fracturing and lineament building, (2) cryovolcanic reworking of surface units, with possible emplacement of sub-surface materials, and (3) impact cratering. The geologic histories of both mapped areas are essentially similar and reflect some common trends: Tectonic resurfacing dominates the early geologic record with the formation of background plains by intricate superposition of lineaments, the opening of wide bands with infilling of inter-plate gaps, and the buildup of ridges and ridge complexes along prominent fractures in the ice. It also appears that lineaments are narrower and more widely spaced with time. The lack of impact craters overprinted by lineaments indicate that the degree of tectonic resurfacing decreased rapidly after ridged plains formation. In contrast, the degree of cryovolcanic resurfacing appears to increase with time, as chaos formation dominates the later parts of the geologic record. These trends, and the transition from tectonic- to cryovolcanic-dominated resurfacing could be attributed to the gradual thickening of Europa's cryosphere during the visible geologic history, that comprises the last 2% or 30-80 Myr of Europa's history: An originally thin, brittle ice shell could be pervasively fractured or melted through by tidal and endogenic processes; the degree of fracturing and plate displacements decreased with time in a thickening shell, and lineaments became narrower and more widely spaced; formation of chaos regions could have occurred where the thickness threshold for solid-state convection was exceeded, and can be aided by preferential tidal heating of more ductile ice. In a long-term context it is not clear at this point whether this inferred thickening trend would reflect a drastic change in the thermal evolution of the satellite, or cyclic or irregular episodes of tectonic and cryovolcanic activity.     

Comment on “Mechanics of tidally driven fractures in Europa's ice shell” by S. Lee, R.T. Pappalardo, and N.C. Makris [2005. Icarus 177, 367-379]

We show Lee, Pappalardo, and Makris' [2005. Icarus 177, 367-379] argument that surface cracks in Europa's icy shell penetrate 3-10 times deeper in the presence of subsurface ocean is not correct. We use numerical calculations to demonstrate that there is at most 50% increase in penetration depth for a crack opening in a shell of finite thickness compared to a half-space. We also propose a simple equation based on force balances to estimate the maximum thickness of an ice shell that can be opened under tensile stress. Our calculations show that a crack can only penetrate 330-m-thick ice shell under 200 kPa far-field tensile stress and half of that if the stress is 100 kPa. But the presence of water would allow crack penetrate ∼4.0 km into the ice shell with zero porosity.     

Modeling stresses on satellites due to nonsynchronous rotation and orbital eccentricity using gravitational potential theory

The tidal stress at the surface of a satellite is derived from the gravitational potential of the satellite's parent planet, assuming that the satellite is fully differentiated into a silicate core, a global subsurface ocean, and a decoupled, viscoelastic lithospheric shell. We consider two types of time variability for the tidal force acting on the shell: one caused by the satellite's eccentric orbit within the planet's gravitational field (diurnal tides), and one due to nonsynchronous rotation (NSR) of the shell relative to the satellite's core, which is presumed to be tidally locked. In calculating surface stresses, this method allows the Love numbers h and ?, describing the satellite's tidal response, to be specified independently; it allows the use of frequency-dependent viscoelastic rheologies (e.g. a Maxwell solid); and its mathematical form is amenable to the inclusion of stresses due to individual tides. The lithosphere can respond to NSR forcing either viscously or elastically depending on the value of the parameter , where μ and η are the shear modulus and viscosity of the shell respectively, and ω is the NSR forcing frequency. Δ is proportional to the ratio of the forcing period to the viscous relaxation time. When Δ?1 the response is nearly fluid; when Δ?1 it is nearly elastic. In the elastic case, tensile stresses due to NSR on Europa can be as large as ∼3.3 MPa, which dominate the ∼50 kPa stresses predicted to result from Europa's diurnal tides. The faster the viscous relaxation the smaller the NSR stresses, such that diurnal stresses dominate when Δ?100. Given the uncertainty in current estimates of the NSR period and of the viscosity of Europa's ice shell, it is unclear which tide should be dominant. For Europa, tidal stresses are relatively insensitive both to the rheological structure beneath the ice layer and to the thickness of the icy shell. The phase shift between the tidal potential and the resulting stresses increases with Δ. This shift can displace the NSR stresses longitudinally by as much as 45° in the direction opposite of the satellite's rotation.     

Probing Europa's interior with natural sound sources

Europa's interior structure may be determined by relatively simple and robust seismo-acoustic echo sounding techniques. The strategy is to use ice cracking events or impacts that are hypothesized to occur regularly on Europa's surface as sources of opportunity. A single passive geophone on Europa's surface may then be used to estimate the thickness of its ice shell and the depth of its ocean by measuring the travel time of seismo-acoustic reflections from the corresponding internal strata. Quantitative analysis is presented with full-field seismo-acoustic modeling of the Europan environment. This includes models for Europan ambient noise and conditions on signal-to-noise ratio necessary for the proposed technique to be feasible. The possibility of determining Europa's ice layer thickness by surface wave and modal analysis with a single geophone is also investigated.     

Thermal-orbital evolution of Io and Europa

Coupled thermal-orbital evolution models of Europa and Io are presented. It is assumed that Io, Europa, and Ganymede evolve in the Laplace resonance and that tidal dissipation of orbital energy is an internal heat source for both Io and Europa. While dissipation in Io occurs in the mantle as in the mantle dissipation model of Segatz et al. (1988, Icarus 75, 187), two models for Europa are considered. In the first model dissipation occurs in the silicate mantle while in the second model dissipation occurs in the ice shell. In the latter model, ice shell melting and variations of the shell thickness above an ocean are explicitly included. The rheology of both the ice and the rock is cast in terms of a viscoelastic Maxwell rheology with viscosity and shear modulus depending on the average temperature of the dissipating layer. Heat transfer by convection is calculated using a parameterization for strongly temperature-dependent viscosity convection. Both models are consistent with the present orbital elements of Io, Europa, and Ganymede. It is shown that there may be phases of quasi-steady evolution with large or small dissipation rates (in comparison with radiogenic heating), phases with runaway heating or cooling and oscillatory phases during which the eccentricity and the tidal heating rate will oscillate. Europa's ice thickness varies between roughly 3 and 70 km (dissipation in the silicate layer) or 10 and 60 km (dissipation in the ice layer), suggesting that Europa's ocean existed for geological timescales. The variation in ice thickness, including both convective and purely conductive phases, may be reflected in the formation of different geological surface features on Europa. Both models suggest that at present Europa's ice thickness is several tens of km thick and is increasing, while the eccentricity decreases, implying that the satellites evolve out of resonance. Including lithospheric growth in the models makes it impossible to match the high heat flux constraint for Io. Other heat transfer processes than conduction through the lithosphere must be important for the present Io.     

Is There Evidence for Polar Wander on Europa?

The orientations of the albedo lineaments, bands, and lineations on Europa's surface have been compared in previous studies with the global stress fields set up by orbital eccentricity, orbital recession, and nonsynchronous rotation. Of these orbital and rotational effects, nonsynchronous rotation, combined with an offsetting of the tidal bulge, comes closest to providing agreement between the stress field generated and the lineation orientations, if the lineations trace tension or extension fractures (McEwen 1986.Nature321, 49–51). However, inferred minimum principal stress directions for a broad region of wedge-shaped bands near the anti-Jove point cannot satisfactorily be accounted for by any of the stress fields above, but are consistent with the stresses resulting from a rotation of Europa's ice shell about an axis through the sub- and anti-Jove points, clockwise as seen from the anti-Jove hemisphere (P. M. Schenk and W. B. McKinnon 1989.Icarus79, 75–100). Calculations by Ojakangas and Stevenson (1989.Icarus81, 220–241) of the thermal state of Europa's ice shell indicate that spatial variations in the thickness of the shell may cause it to undergo such a reorientation. We have investigated whether any reorientation of the shell about an axis through the sub- and anti-Jove points produces a stress field consistent with the full, global set of prominent lineations on Europa's surface. We find that no such reorientation provides a good fit between the lineations and plausible fracture orientations derived from the principal stress trajectories. Topographic ridges, identified in a limited zone south of the anti-Jove point, are roughly consistent with compression due to clockwise polar wander, but the orientations of these ridges may be strongly biased by illumination direction. Within the limitations of the presently available imagery, nonsynchronous rotation is still the most likely cause of the prominant fractures on Europa's surface, and the best specific, albeit regionally limited, tectonic evidence consistent with recent polar wander remains the wedge-shaped bands.     

Putative ice flows on Europa: Geometric patterns and relation to topography collectively constrain material properties and effusion rates

Europa's surface exhibits numerous small dome-like and lobate features, some of which have been attributed to fluid emplacement of ice or slush on the surface. We perform numerical simulations of non-Newtonian flows to assess the physical conditions required for these features to result from viscous flows. Our simulations indicate that the morphology of an ice flow on Europa will be, at least partially, influenced by pre-existing topography unless the thickness of the flow exceeds that of the underlying topography by at least an order of magnitude. Three classes of features can be identified on Europa. First, some (possibly most) putative flow-like features exhibit no influence from the pre-existing topography such as ridges, although their thicknesses are generally on the same order as those of ridges. Therefore, flow processes probably cannot explain the formation of these features. Second, some observed features show modest influence from the underlying topography. These might be explained by ice flows with wide ranges of parameters (ice temperatures >230 K, effusion rates >10⁷ m³ year⁻¹, and a wide range of grain sizes), although surface uplift (e.g., by diapirism) and in situ disaggregation provide an equally compelling explanation. Third, several observed features are completely confined by pre-existing topographic structures on at least one side; these are the best known candidates for flow features on Europa. If these features resulted from solid-ice flows, then temperatures >260 K and grain sizes <2 μm are required. Such small grain sizes seem unlikely; low-viscosity flows such as ice slurries or brines provide a better explanation for these features. Our results provide theoretical support for the view that many of Europa's lobate features have not resulted from solid-ice flows.     

Oceans in the icy Galilean satellites of Jupiter?

Equilibrium models of heat transfer by heat conduction and thermal convection show that the three satellites of Jupiter—Europa, Ganymede, and Callisto—may have internal oceans underneath ice shells tens of kilometers to more than a hundred kilometers thick. A wide range of rheology and heat transfer parameter values and present-day heat production rates have been considered. The rheology was cast in terms of a reference viscosity ν₀ calculated at the melting temperature and the rate of change A of viscosity with inverse homologous temperature. The temperature dependence of the thermal conductivity k of ice I has been taken into account by calculating the average conductivity along the temperature profile. Heating rates are based on a chondritic radiogenic heating rate of 4.5 pW kg⁻¹ but have been varied around this value over a wide range. The phase diagrams of H₂O (ice I) and H₂O + 5 wt% NH₃ ice have been considered. The ice I models are worst-case scenarios for the existence of a subsurface liquid water ocean because ice I has the highest possible melting temperature and the highest thermal conductivity of candidate ices and the assumption of equilibrium ignores the contribution to ice shell heating from deep interior cooling. In the context of ice I models, we find that Europa is the satellite most likely to have a subsurface liquid ocean. Even with radiogenic heating alone the ocean is tens of kilometers thick in the nominal model. If tidal heating is invoked, the ocean will be much thicker and the ice shell will be a few tens of kilometers thick. Ganymede and Callisto have frozen their oceans in the nominal ice I models, but since these models represent the worst-case scenario, it is conceivable that these satellites also have oceans at the present time. The most important factor working against the existence of subsurface oceans is contamination of the outer ice shell by rock. Rock increases the density and the pressure gradient and shifts the triple point of ice I to shallower depths where the temperature is likely to be lower then the triple point temperature. According to present knowledge of ice phase diagrams, ammonia produces one of the largest reductions of the melting temperature. If we assume a bulk concentration of 5 wt% ammonia we find that all the satellites have substantial oceans. For a model of Europa heated only by radiogenic decay, the ice shell will be a few tens of kilometers thinner than in the ice I case. The underlying rock mantle will limit the depth of the ocean to 80-100 km. For Ganymede and Callisto, the ice I shell on top of the H₂O-NH₃ ocean will be around 60- to 80-km thick and the oceans may be 200- to 350-km deep. Previous models have suggested that efficient convection in the ice will freeze any existing ocean. The present conclusions are different mainly because they are based on a parameterization of convective heat transport in fluids with strongly temperature dependent viscosity rather than a parameterization derived from constant-viscosity convection models. The present parameterization introduces a conductive stagnant lid at the expense of the thickness of the convecting sublayer, if the latter exists at all. The stagnant lid causes the temperature in the sublayer to be warmer than in a comparable constant-viscosity convecting layer. We have further modified the parameterization to account for the strong increase in homologous temperature, and therefore decrease in viscosity, with depth along an adiabat. This modification causes even thicker stagnant lids and further elevated temperatures in the well-mixed sublayer. It is the stagnant lid and the comparatively large temperature in the sublayer that frustrates ocean freezing.     

The great thickness debate: Ice shell thickness models for Europa and comparisons with estimates based on flexure at ridges

Estimates of the thickness of the ice shell of Europa range from <1 to >30 km. The higher values are generally assumed to be estimates of the entire ice shell thickness, which may include a lower ductile layer of ice, whereas many of the smaller thickness estimates are based on analyses that only consider that portion of the ice layer that behaves elastically at a particular strain rate. One example of the latter is flexure analysis, in which the elastic ice layer is modeled as a plate or sphere that is flexed under the weight of a surface load. We present calculations based on flexure analysis in which we model the elastic ice layer as flexing under a line-load caused by ridges. We use precisely located, parallel flanking cracks as indicators of the location of greatest tensile stress induced by flexure. Our elastic thickness results are spatially variable: ∼500-2200 m (two sites) and ∼200-1000 m (one site). Thorough analysis of Europan flexure studies performed by various researchers shows that the type of model selected causes the greatest variability in the thickness results, followed by the choice of Young's modulus, which is poorly constrained for the Europan ice shell. Comparing our results to those of previously published flexure analyses for Europa, we infer spatial variability in the elastic ice thickness (at the time of load emplacement), with smooth bands having the thinnest elastic ice thickness of all areas studied. Because analysis of flexure-induced fracturing can only reveal the elastic thickness at the time of load emplacement, calculated thickness variability between features having different ages may also reflect a temporal variability in the thickness of Europa's ice shell.     

The impact of a weak south pole on thermal convection in Enceladus’ ice shell

Enceladus exhibits a strong hemispheric dichotomy of tectonism and heat flux, with geologically young, heavily tectonized terrains and a high heat flux in the South Polar Terrain (SPT) and relatively ancient terrains with presumably lower heat fluxes over the rest of the satellite. To understand the convective pattern and its relationship with surface tectonics, we present three-dimensional numerical models of convection in Enceladus’ ice shell including basal heating and tidal heating. Our thermal boundary conditions exhibit no north–south asymmetries, but because the tectonism at the SPT may weaken the ice there, we impose a mechanically weak lithosphere within the SPT. The weakening is parameterized by adopting a reduced viscosity contrast within the SPT. Without such a weak zone, convection (if any) resides in stagnant-lid mode and exhibits no hemispheric dichotomy. In the presence of such an SPT weak zone, however, we find vigorous convection in the ice underneath the SPT, with convective plumes rising close to the surface. In contrast, only stagnant lid convection, or no convection at all, occurs elsewhere over the satellite. Away from the SPT, the heat flux in our models is small (5–10 mW m^?2) and the surface strains are small enough to imply surface ages >10⁹ years. Within the SPT, however, our models yield peak heat fluxes of ～70–200 mW m^?2, implying heat flows integrated across the SPT of up to 5 GW, similar to that inferred from Cassini thermal observations. The surface strains in our models are high enough near the south pole to cause intense tectonism and imply surface ages of ～10⁶–10⁷ years, consistent with age estimates of the SPT.     

Energy Distributions for Desorption of Sodium and Potassium from Ice: The Na/K Ratio at Europa

The sputtering and decomposition of the surface of Europa by fast ions and electrons lead to the production of an atomosphere containing sodium and potassium atoms. Here time-of-flight energy distributions are measured for Na and K sputtered from a vapor-deposited ice by 200-eV electrons. These data are then used in a Monte Carlo simulation for alkalis in Europa's atmosphere. Na/K ratios versus distance from Europa are calculated and compared to the recent observations in the range 6 to 18 Europan radii from the surface. Normalizing to the observations, the Na/K ratio for the loss rates is ∼27 and the ratio for the average surface source rates is ∼20. These ratios are very different from the Na/K ratio at Io and are larger than the Na/K ratio suggested for Europa's putative subsurface ocean, consistent with fractionation on freezing and upwelling of ocean material.     

Stagnant lid convection in the mid-sized icy satellites of Saturn

Thermal history models for the mid-sized saturnian satellites Mimas, Tethys, Dione, Iapetus, and Rhea have been calculated assuming stagnant lid convection in undifferentiated satellites and varying parameter values over broad ranges. Of all five satellites under consideration, only Dione, Rhea and Iapetus do show significant internal activities related to convective overturn for extended periods of time. The interiors of Mimas and Tethys do not convect or do so only for brief periods of time early in their thermal histories. Although we use lower densities than previous models, our calculations suggest higher interior temperatures but also thicker rigid shells above the convecting regions. Temperatures in the stagnant lid will allow melting of ammonia-dihydrate. Dione, Rhea and Iapetus may differentiate early and form early oceans, Iapetus only if ammonia is present. Mimas and Tethys with ammonia may differentiate if they accreted in an optically thick nebula with ambient temperatures around 250 K. Our models suggest that the outer shells of the satellites are largely primordial in composition even if the satellites differentiated. In these cases the deep interior may be layered with a pure ice shell underlain by an ammonia dihydrate layer and a rock core.