A sulfur isotopic study of the San Cristobal tungsten-base metal mine,Peru

The San Cristobal tungsten-base metal deposit differs from other quartz-wolframite vein deposits in that it has a major period of base metal mineralization consisting of pyrite, chalcopyrite, sphalerite, and galena. Homogenization temperatures of primary and pseudosecondary inclusions were measured in augelite (260–400°C), quartz (230–350°C) and sphalerite (180–220°C). The ³⁴S values of H₂S in solution in equilibrium with the vein minerals range from 1.6 to 9.0 permil increasing through the paragenesis. The relatively heavy values suggest a nonmagmatic source for the sulfur. Evaporitic sulfates are a likely source of heavy sulfur and sedimentary anhydrite is known to occur near the San Cristobal region. In contrast to San Cristobal are three similar quartz-wolframite vein deposits, Pasto Bueno, Panasqueira, and Tungsten Queen. They each have an average ³⁴S value for sulfides of about 0 permil, suggesting a sulfur of magmatic origin. At San Cristobal an influx of sedimentary sulfur could not only account for the distinctive isotopic signature of the sulfides but also for the presence of the base metal mineralization.     

The Lower Changjiang (Yangzi/Yangtze River) metallogenic belt, east central China: intrusion- and wall rock-hosted Cu–Fe–Au, Mo, Zn, Pb, Ag deposits

The lower valley of Changjiang, from Wuhan of the Hubei Province in the west to Zhenjiang of the Jiangsu Province in the east, contains more than 200 polymetallic (Cu–Fe–Au, Mo, Zn, Pb, Ag) deposits and is one of the most important metallogenic belts in China. This metallogenic belt, situated at the northern margin of the Yangzi craton and bordered by the Dabieshan ultrahigh pressure metamorphic belt to the north, consists mainly of Cambrian–Triassic marine clastic sedimentary rocks and carbonate and evaporite rocks, which overlay a Precambrian basement and are intruded by Yanshanian (205 to 64 Ma) granitoid intrusions and subvolcanic complexes. Repeated tectonism from Late Proterozoic to Triassic resulted in extensively developed networks of faults and folds involving the Cambrian–Triassic sedimentary strata and the Precambrian basement. The Yanshanian granitoid intrusions and subvolcanic complexes in the Lower Changjiang metallogenic belt are characterized by whole-rock δ¹⁸O of +8‰ to +10‰, initial ⁸⁷Sr/⁸⁶Sr of 0.704 to 0.708, and εNd^t from −10 to −17 and have been interpreted to have originated from mixing between juvenile mantle and old crustal materials. Also, the Yanshanian granitoids exhibit eastward younging and increase in alkalinity (i.e., from older calc–alkaline in the west to younger subalkaline–alkaline in the east), which are related to oblique collision between the Yangzi and Sino-Korean cratons and tectonic evolution from early compressional to late extensional or rifting regimes. Most polymetallic deposits in the Lower Changjiang metallogenic belt are clustered in seven districts where the Yanshanian magmatism is particularly extensive: from west to east, Edong, Jiurui, Anqing–Guichi, Luzhong, Tongling, Ningwu and Ningzhen. Mineralization is characterized by the occurrence of three distinct types of orebodies in individual deposits: orebodies in Yanshanian granitoid intrusions, skarn orebodies at the contact zones between the Yanshanian intrusions and Late Paleozoic–Early Mesozoic sedimentary rocks, and stratabound massive sulfide orebodies in the Late Paleozoic–Early Mesozoic sedimentary strata. The most important host sedimentary strata are the Middle Carboniferous Huanglong Formation, Lower Permian and Lower–Middle Triassic carbonate and evaporite rocks. The intrusion-hosted and skarn orebodies exhibit well-developed zonation in alteration assemblages, metal contents, and isotopic compositions within individual deposits, and apparently formed from hydrothermal activities related to the Yanshanian magmatism. The stratabound massive sulfide orebodies in the Late Paleozoic–Early Mesozoic sedimentary strata have long been suggested to have formed from sedimentary or volcano-sedimentary exhalative processes in shallow marine environments. However, extensive research over the last 40 years failed to produce unequivocal evidence for syngenetic mineralization. On the basis of geological relationships and isotope geochemical characteristics, we propose a carbonate-hosted replacement deposit model for the genesis of these stratabound massive sulfide orebodies and associated skarn orebodies. This model suggests that epigenetic mineralization resulted from interactions between magmatic fluids evolved from the Yanshanian intrusions with carbonate and evaporite wall rocks. Mineralization was an integral but distal part of the larger hydrothermal systems that formed the proximal skarn orebodies at the contact zones and the intrusion-hosted orebodies. The stratabound massive sulfide deposits of the Lower Changjiang metallogenic belt share many features with the well-studied, high-temperature, carbonate-hosted replacement deposits of northern Mexico and western United States, particularly with respect to association with small, shallow granitoid complexes, structural and stratigraphic controls on mineralization, alteration assemblages, geometry of orebodies, metal association, metal zonation and isotopic systematics.     

Geology and wall rock alteration at the Hercynian Draa Sfar Zn–Pb–Cu massive sulphide deposit, Morocco

Draa Sfar is a siliciclastic–felsic, volcanogenic massive sulphide (VMS) Zn–Pb–Cu deposit located 15 km north of Marrakesh within the Jebilet massif of the western Moroccan Meseta. The Draa Sfar deposit occurs within the Sarhlef series, a volcano-sedimentary succession that hosts other massive sulphide deposits (e.g., Hajar, Kettara) within the dominantly siliciclastic sedimentary succession of the lower Central Jebilet. At Draa Sfar, the footwall lithofacies are dominated by grey to black argillite, carbonaceous argillite and intercalated siltstone with localized rhyodacitic flows and domes, associated in situ and transported autoclastic deposits, and lesser dykes of aphanitic basalt and gabbro. Thin- to thick-bedded, black carbonaceous argillite, minor intercalated siltstone, and a large gabbro sill dominate the hanging wall lithofacies. The main lithologies strike NNE–SSW, parallel to a pronounced S1 foliation, and have a low-grade, chlorite–muscovite–quartz–albite–oligoclase metamorphic assemblage. The Draa Sfar deposit consists of two stratabound sulphide orebodies, Tazakourt to the south and Sidi M'Barek to the north. Both orebodies are hosted by argillite in the upper part of the lower volcano-sedimentary unit. The Tazakourt and Sidi M'Barek orebodies are highly deformed, sheet-like bodies of massive pyrrhotite (up to 95% pyrrhotite) with lesser sphalerite, galena, chalcopyrite, and pyrite. The Draa Sfar deposit formed within a restricted, sediment-starved, fault-controlled, anoxic, volcano-sedimentary rift basin. The deposit formed at and below the seafloor within anoxic, pelagic muds.The argillaceous sedimentary rocks that surround the Draa Sfar orebodies are characterized by a pronounced zonation of alteration assemblages and geochemical patterns. In the more proximal volcanic area to the south, the abundance of medium to dark green chlorite progressively increases within the argillite toward the base of the Tazakourt orebody. Chlorite alteration is manifested by the replacement of feldspar and a decrease in muscovite abundance related to a net addition of Fe and Mg and a loss of K and Na. In the volcanically distal and northern Sidi M'Barek orebody alteration within the footwall argillite is characterized by a modal increase of sericite relative to chlorite. A calcite–quartz–muscovite assemblage and a pronounced decrease in chlorite characterize argillite within the immediate hanging wall to the entire Draa Sfar deposit. The sympathetic lateral change from predominantly sericite to chlorite alteration within the footwall argillite with increasing volcanic proximity suggests that the higher temperature part of the hydrothermal system is coincident with a volcanic vent defined by localized rhyodacitic flow/domes within the footwall succession.     

Genesis of sediment-hosted stratiform copper–cobalt deposits, central African Copperbelt

The Neoproterozoic central African Copperbelt is one of the greatest sediment-hosted stratiform Cu–Co provinces in the world, totalling 140 Mt copper and 6 Mt cobalt and including several world-class deposits (10 Mt copper). The origin of Cu–Co mineralisation in this province remains speculative, with the debate centred around syngenetic–diagenetic and hydrothermal-diagenetic hypotheses.The regional distribution of metals indicates that most of the cobalt-rich copper deposits are hosted in dolomites and dolomitic shales forming allochthonous units exposed in Congo and known as Congolese facies of the Katangan sedimentary succession (average Co:Cu = 1:13). The highest Co:Cu ratio (up to 3:1) occurs in ore deposits located along the southern structural block of the Lufilian Arc. The predominantly siliciclastic Zambian facies, exposed in Zambia and in SE Congo, forms para-autochthonous sedimentary units hosting ore deposits characterized by lower a Co:Cu ratio (average 1:57). Transitional lithofacies in Zambia (e.g. Baluba, Mindola) and in Congo (e.g. Lubembe) indicate a gradual transition in the Katangan basin during the deposition of laterally correlative clastic and carbonate sedimentary rocks exposed in Zambia and in Congo, and are marked by Co:Cu ratios in the range 1:15.The main Cu–Co orebodies occur at the base of the Mines/Musoshi Subgroup, which is characterized by evaporitic intertidal–supratidal sedimentary rocks. All additional lenticular orebodies known in the upper part of the Mines/Musoshi Subgroup are hosted in similar sedimentary rocks, suggesting highly favourable conditions for the ore genesis in particular sedimentary environments. Pre-lithification sedimentary structures affecting disseminated sulphides indicate that metals were deposited before compaction and consolidation of the host sediment.The ore parageneses indicate several generations of sulphides marking syngenetic, early diagenetic and late diagenetic processes. Sulphur isotopic data on sulphides suggest the derivation of sulphur essentially from the bacterial reduction of seawater sulphates. The mineralizing brines were generated from sea water in sabkhas or hypersaline lagoons during the deposition of the host rocks. Changes of Eh–pH and salinity probably were critical for concentrating copper–cobalt and nickel mineralisation. Compressional tectonic and related metamorphic processes and supergene enrichment have played variable roles in the remobilisation and upgrading of the primary mineralisation.There is no evidence to support models assuming that metals originated from: (1) Katangan igneous rocks and related hydrothermal processes or; (2) leaching of red beds underlying the orebodies. The metal sources are pre-Katangan continental rocks, especially the Palaeoproterozoic low-grade porphyry copper deposits known in the Bangweulu block and subsidiary Cu–Co–Ni deposits/occurrences in the Archaean rocks of the Zimbabwe craton. These two sources contain low grade ore deposits portraying the peculiar metal association (Cu, Co, Ni, U, Cr, Au, Ag, PGE) recorded in the Katangan sediment-hosted ore deposits. Metals were transported into the basin dissolved in water.The stratiform deposits of Congo and Zambia display features indicating that syngenetic and early diagenetic processes controlled the formation of the Neoproterozoic Copperbelt of central Africa.     

Microstructural evidence for an epigenetic origin of a Proterozoic zinc-lead-silver deposit, Dugald River, Mount Isa Inlier, Australia

The Zn-Pb-Ag deposit contained in the metasediments of middle Proterozoic age at Dugald River forms one of a number of significant zones of sulphide mineralization within the Eastern Fold Belt of the Mount Isa Inlier. It is characterized by its high Zn + Pb grade, high Zn/(Zn+Pb) ratio and strong structural controls with the present resource standing at 38 million tons averaging 13% Zn, 2.1% Pb and 42 g/t Ag. Microstructural timing relationships and a variety of microscopic ore textures indicate that the deposit resulted from replacement and partial infill of carbonaceous and pyritic host rocks by hydrothermal ore-forming fluids during the D₄ deformation event. This genesis is contrary to earlier syngenetic-based interpretations, but accords with the discordant nature and structural controls on emplacement of the mineralization. Key timing criteria include (1) truncation of S₂ and/or S₃ by the late ore minerals, (2) replacement textures in undeformed mineral paragenesis, (3) slightly preferred dimensional orientation and undulating extinction of quartz and muscovite that are intergrown but which crystallized earlier than sulphide minerals in veins. The presence of these microstructural relationships throughout the deposit and the complete absence of any syngenetic stratiform precursor to zinc-lead-silver mineralization indicates that the zinc, lead and silver at Dugald River were epigenetically introduced rather than just having undergone syngenetic deposition during sedimentation and remobilization during deformation. The regional distribution of the mineralization in a specific stratigraphic zone is most likely due to the partitioning of deformation between different rock types. This caused the weaker lithology to accommodate significantly higher strain than adjacent more competent units, resulting in fracturing and localization of the syntectonic mineralization. Received: 8 September 1995 / Accepted: 12 April 1996     

Rare earth element geochemistry of the Woxi W–Sb–Au deposit, Hunan Province, South China

The Woxi W–Sb–Au deposit in Hunan, South China, is hosted by Proterozoic metasedimentary rocks, a turbiditic sequence of slightly metamorphosed (greenschist facies), gray-green and purplish red graywacke, siltstone, sandy slate, and slate. The mineralization occurs predominantly (> 70%) as stratabound/stratiform ore layers and subordinately as stringer stockworks. The former consists of rhythmically interbedded, banded to finely laminated stibnite, scheelite, quartz, pyrite and silty clays, whereas the latter occurs immediately beneath the stratabound ore layers and is characterized by numerous quartz + pyrite + gold + scheelite stringer veins or veinlets that are typically either subparallel or subvertical to the overlying stratabound ore layers. The deposit has been the subject of continued debate in regard to its genesis. Rare earth element geochemistry is used here to support a sedimentary exhalative (sedex) origin for the Woxi deposit. The REE signatures of the metasedimentary rocks and associated ores from the Woxi W–Sb–Au deposit remained unchanged during post-depositional processes and were mainly controlled by their provenance. The original ore-forming hydrothermal fluids, as demonstrated by fluid inclusions in quartz from the banded ores, are characterized by variable total REE concentrations (3.5 to 136 ppm), marked LREE enrichment (La_N/Yb_N = 28–248, ∑LREE/∑HREE = 16 to 34) and no significant Eu-anomalies (Eu/Eu = 0.83 to 1.18). They were most probably derived from evolved seawater that circulated in the clastic sediment pile and subsequently erupted on the seafloor. The bulk banded ores are enriched in HREE (La_N/Yb_N = 4.6–11.4, ∑LREE/∑HREE = 3 to 14) and slightly depleted in Eu (Eu/Eu = 0.63 to 1.14) relative to their parent fluids. This is interpreted as indicating the influence of seawater rather than a crystallographic control on REE content of the ores. Within a single ore layer, the degree of HREE enrichment tends to increase upward while the total REE concentrations decrease, reflecting greater influence and dilution of seawater. There is a broad similarity in chondrite-normalized REE patterns and the amount of REE fractionation of the banded ores in this study and exhalites from other sedex-type polymetallic ore deposits, suggesting a similar genesis for these deposits. This conclusion is in agreement with geologic evidence supporting a syngenetic (sedex) model for the Woxi deposit.     

Sedimentary rock-hosted Au deposits of the Dian–Qian–Gui area, Guizhou, and Yunnan Provinces, and Guangxi District, China

Sedimentary rock-hosted Au deposits in the Dian–Qian–Gui area in southwest China are hosted in Paleozoic and early Mesozoic sedimentary rocks along the southwest margin of the Yangtze (South China) Precambrian craton. Most deposits have characteristics similar to Carlin-type Au deposits and are spatially associated, on a regional scale, with deposits of coal, Sb, barite, As, Tl, and Hg. Sedimentary rock-hosted Au deposits are disseminated stratabound and(or) structurally controlled. The deposits have many similar characteristics, particularly mineralogy, geochemistry, host rock, and structural control. Most deposits are associated with structural domes, stratabound breccia bodies, unconformity surfaces or intense brittle–ductile deformation zones, such as the Youjiang fault system. Typical characteristics include impure carbonate rock or calcareous and carbonaceous host rock that contains disseminated pyrite, marcasite, and arsenopyrite—usually with μm-sized Au, commonly in As-rich rims of pyrite and in disseminations. Late realgar, orpiment, stibnite, and Hg minerals are spatially associated with earlier forming sulfide minerals. Minor base–metal sulfides, such as galena, sphalerite, chalcopyrite, and Pb–Sb–As–sulphosalts also are present. The rocks locally are silicified and altered to sericite–clay (illite). Rocks and(or) stream-sediment geochemical signatures typically include elevated concentrations of As, Sb, Hg, Tl, and Ba. A general lack of igneous rocks in the Dian–Qian–Gui area implies non-pluton-related, ore forming processes. Some deposits contain evidence that sources of the metal may have originated in carbonaceous parts of the sedimentary pile or other sedimentary or volcanic horizons. This genetic process may be associated with formation and mobilization of petroleum and Hg in the region and may also be related to As-, Au-, and Tl-bearing coal horizons. Many deposits also contain textures and features indicative of strong structural control by tectonic domes or shear zones and also suggest syndeformational ore deposition, possibly related to the Youjiang fault system. Several sedimentary rock-hosted Au deposits in the Dian–Qian–Gui area also are of the red earth-type and Au grades have been concentrated and enhanced during episodes of deep weathering.     

中秦岭正河金矿床控矿构造特征及其成矿作用分析

本文讨论了中秦岭正河金矿床的成矿地质特征,结合成矿流体物理化学条件、构造控矿作用,提出山阳—凤镇深大断裂是矿床的导矿构造,蚀变矿化带受控于次级背斜构造核部的轴面劈理化带。其成矿作用经历了热水沉积—变质变形—构造热液叠加的构造演化过程。认为蚀变岩型金矿主要分布于金银沟至庙沟一带,矿区11~15线以及31线是寻找石英脉型金矿的有利地段。     

The relationship between the McLaughlin gold–mercury deposit and active hydrothermal systems in the Geysers–Clear Lake area, northern Coast Ranges, California

The Geysers–Clear Lake area has a long history of research on its active hydrothermal systems. It is a unique area containing a number of hydrothermal systems which include: the Geysers steam field, one of the largest vapor-dominated geothermal systems yet recognized; the McLaughlin gold deposit, an extremely well preserved hot-spring style gold deposit; and the Sulphur Bank mercury deposit, one of the first locations where geothermal systems were recognized as modern analogues to epithermal deposits. There is also a variety of active hot- and mineral-springs, including Wilbur Springs, or the Sulphur Creek district, which has been considered one of the type localities for connate fluids.The McLaughlin gold–mercury deposit is a fossil hot-spring system dominated by meteoric waters that exchanged with sedimentary rocks of the Great Valley sequence. Mineralization was syntectonic, occurring contemporaneously with fault movement. The fluids circulated in syntectonic dilation zones that resulted in, and maintained, high permeability of the fluid conduits permitting large volumes of fluid flow. The fluids precipitated metals in response to physical and chemical changes associated with boiling. The hydrothermal fluids that formed the McLaughlin deposit have the highest reservoir temperature, salinity and are isotopically the most enriched, of the Coast Range hydrothermal systems. The McLaughlin deposit is considered an end-member “fluid-dominated” hydrothermal system.The Geysers steam field, in its earliest phase was likely similar to the McLaughlin deposit being fluid-dominated and forming, at least on a small scale, a vein system enriched in silver and anomalous in gold, base metals, antimony and mercury. The hydrothermal system evolved into a vapor-dominated system as a result of decreased permeability of the reservoir, decreased recharge and/or increased heat flow. The modern day reservoir is encapsulated in impermeable rocks and is a “vapor-dominated” end-member hydrothermal system.Active hot- and mineral-springs in the Coast Ranges of northern California are intermediate between the fluid- and vapor-dominated end-member systems. The chemical and isotopic compositions of these fluids are the result of thermal processes and are not explained by simple mixing models between connate fluids and meteoric groundwater. Their isotopic and chemical composition is best explained by meteoric-dominated systems with repeated non-equilibrium subsurface vapor loss (evaporation) in a near closed system, with the relative deuterium and ¹⁸O enrichment proportional to the reservoir temperature.     

The Archean BIF-hosted Cuiabá Gold deposit, Quadrilátero Ferrífero, Minas Gerais, Brazil

The Cuiabá Gold Deposit is located in the northern part of the Quadrilátero Ferrífero, Minas Gerais State, Brazil. The region constitutes an Archean granite–greenstone terrane composed of a basement complex (ca. 3.2 Ga), the Rio das Velhas Supergroup greenstone sequence, and related granitoids (3.0–2.7 Ga), which are overlain by the Proterozoic supracrustal sequences of the Minas (< 2.6–2.1  Ga) and Espinhaço (1.7 Ga) supergroups.The stratigraphy of the Cuiabá area is part of the Nova Lima Group, which forms the lower part of the Rio das Velhas Supergroup. The lithological succession of the mine area comprises, from bottom to top, lower mafic metavolcanics intercalated with carbonaceous metasedimentary rocks, the gold-bearing Cuiabá-Banded Iron Formation (BIF), upper mafic metavolcanics and volcanoclastics and metasedimentary rocks. The metamorphism reached the greenschist facies. Tectonic structures of the deposit area are genetically related to deformation phases D₁, D₂, D₃, which took place under crustal compression representing one progressive deformational event (E_n).The bulk of the economic-grade gold mineralization is related to six main ore shoots, contained within the Cuiabá BIF horizon, which range in thickness between 1 and 6 m. The BIF-hosted gold orebodies (> 4 ppm Au) represent sulfide-rich segments of the Cuiabá BIF, which grade laterally into non-economic mineralized or barren iron formation. Transitions from sulfide-rich to sulfide-poor BIF are indicated by decreasing gold grades from over 60 ppm to values below the fire assay detection limit in sulfide-poor portions. The deposit is “gold-only”, and shows a characteristic association of Au with Ag, As, Sb and low base-metal contents. The gold is fine grained (up to 60 μm), and is generally associated with sulfide layers, occurring as inclusions, in fractures or along grain boundaries of pyrite, the predominant sulfide mineral (> 90 vol.%). Gold is characterized by an average fineness of 0.840 and a large range of fineness (0.759 to 0.941).The country rocks to the mineralized BIF show strong sericite, carbonate and chlorite alteration, typical of greenschist facies metamorphic conditions. Textures observed on microscopic to mine scales indicate that the mineralized Cuiabá BIF is the result of sulfidation involving pervasive replacement of Fe-carbonates (siderite–ankerite) by Fe-sulfides. Gold mineralization at Cuiabá shows various features reported for Archean gold–lode deposits including the: (1) association of gold mineralization with Fe-rich host rocks; (2) strong structural control of the gold orebodies, showing remarkable down-plunge continuity (> 3 km) relative to strike length and width (up to 20 m); (3) epigenetic nature of the mineralization, with sulfidation as the major wall–rock alteration and directly associated with gold deposition; (4) geochemical signature, with mineralization showing consistent metal associations (Au–Ag–As–Sb and low base metal), which is compatible with metamorphic fluids.     

Tin mineralization in the Dajing tin–polymetallic deposit, Inner Mongolia, China

Dajing is a large-scale tin–polymetallic deposit that hosts the largest tin mine in North China. It is a hydrothermal vein-type deposit containing Sn, Cu, Pb, Zn, Ag, and minor components Co and In. The deposit consists of more than 690 veins hosted within Upper Permian sedimentary rocks.Three mineralization stages and six ore types are recognized with cassiterite constituting the dominant tin mineral. The SnO₂ content of cassiterite increases in the sequence of mineralization stages shear-deformation→cassiterite–quartz→cassiterite–sulfide (or chalcopyrite–pyrite) stage, while the content of FeO, TiO₂, Nb₂O₅, Ta₂O₅, and In₂O₅ tends to decrease with increases in NiO and Ga₂O₅. It is considered that the negative correlation between SnO₂ and FeO, Nb₂O₅, Ta₂O₅, and In₂O₅ results from elemental substitutions. The early stage cassiterite is much richer in Ta and the later stage cassiterite is much poorer in Ti and Fe than is usual in hydrothermal vein type tin deposits. This is interpreted to indicate that the component of early stage cassiterite reflects a granitic magma source while the composition of later stage cassiterite has a more obvious strata source. The compositional variation of cassiterite corresponds to decreasing crystallization temperatures within each stage and between sequential stages with time. The characteristics of REE in cassiterite from two stages are in accord with that of subvolcanic rocks and the Linxi formation. It suggests that tin transported during the cassiterite–quartz stage may have originated from subvolcanic dikes (e.g., dacite porphyry), while in the cassiterite–sulfide stage, tin may have been derived from wallrock (e.g. siltstone) of the Upper Permian-age Linxi Formation.     

Comparative Study of Gacun and Youre Silver–Lead–Zinc–Copper Deposits in Sichuan, SW China, and their Mineralization Significance

The large Gacun silver–lead–zinc–copper deposit in Sichuan Province is one of the largest volcanogenic massive sulfide(VMS) deposits in China. The deposit consists of western and central ore bodies, which form a vein–stockwork mineralization system corresponding to hydrothermal channels, and eastern ore bodies, which form an exhalative chemical sedimentary system derived from a brine pool in a submarine basin. The Youre lead–zinc deposit, which is currently under exploration and lies adjacent to the southern part of the Gacun deposit, is characterized by intense silicification and vein–stockwork structures and consists of massive silicified rhyolitic volcanics, banded rhyolitic tuff, and phyllitic sericite tuff. From a comparison of their ore-bearing horizons, the Gacun and Youre deposits have a continuous and stable hanging wall(calcareous slate and overlying andesite) and foot wall(rhyolite–dacite breccia and agglomerate), and the lithologic sequence includes lower intermediate to felsic rocks and upper felsic rocks. Thus, the Youre deposit, which comprises relatively thinly layered low–grade ore, is regarded as forming a southward extension of the Gacun deposit. A further comparison of the structures of the ore-bearing belts between the two deposits suggests that the Youre ore bodies are similar to the western ore bodies of the Gacun deposit. Moreover, the characteristics of fluid inclusions and stable isotopes in the Youre deposit are also similar to those of the western ore bodies of the Gacun deposit. Genetic models of the deposits are proposed for the Gacun–Youre ore district, and massive concealed ore bodies may occcur in the Youre deposit at depths that are similar to those of the eastern ore bodies of the Gacun deposit.     

广西环江县北山地区喷流沉积铅锌矿资源潜力及找矿方向

环江县北山地区铅锌矿均富集在同一地层层位——中上泥盆统，五圩—川山—驯乐NNE向深断裂控制着成矿带，矿床存在大量沉积成岩成矿组构，喷流沉积特征明显。其成矿地质背景、沉积相、礁硅岩套建造、同生断裂活动、赋矿层位等与邻区丹池锡一铅锌多金属矿集区类似，有巨大找矿潜力。     

Geologic, fluid inclusion and isotopic characteristics of the Jinding Zn–Pb deposit, western Yunnan, South China: A review

With a reserve of  200 Mt ore grading 6.08% Zn and 1.29% Pb (i.e., a metal reserve of  15 Mt) hosted in Cretaceous and Tertiary terrestrial rocks, the Jinding deposit is the largest Zn–Pb deposit in China, and also the youngest sediment-hosted super giant Zn–Pb deposit in the world. The deposit mainly occurs in the Jinding dome structure as tabular orebodies within breccia-bearing sandstones of the Palaeocene Yunlong Formation (autochthonous) and in the overlying sandstones of the Early Cretaceous Jingxing Formation (allochthonous). The deposit is not stratiform and no exhalative sedimentary rocks have been observed. The occurrence of the orebodies, presence of hangingwall alteration, and replacement and open-space filling textures all indicate an epigenetic origin. Formation of the Jinding Zn–Pb deposit is related to a period of major continental crust movement during the collision of the Indian and Eurasian Plates. The westward thrusts and dome structure were successively developed in the Palaeocene sedimentary rocks in the ore district, and Zn–Pb mineralisation appears to have taken place in the early stage of the doming processes.The study of fluid inclusions in sphalerite and associated gangue minerals (quartz, celestine, calcite and gypsum) shows that homogenisation temperatures ranged from 54 to 309 °C and cluster around 110 to 150 °C, with salinities of 1.6 to 18.0 wt.% NaCl equiv. Inert gas isotope studies from inclusions in ore- and gangue-minerals reveal 2.0 to 15.6% mantle He, 53% mantle Ne and a considerable amount of mantle Xe in the ore-forming fluids. The Pb-isotope composition of ores shows that the metal is mainly of mantle origin, mixed with a lesser amount of crustal lead. The widely variable and negative δ³⁴S values of Jinding sulphides suggest that thermo-chemical or bacterial sulphate reduction produced reduced sulphur for deposition of the Zn–Pb sulphides. The mixing of a mantle-sourced fluid enriched in metals and CO₂ with reduced sulphide-bearing saline formation water in a structural–lithologic trap may have been the key mechanism for the formation of the Jinding deposit.The Jinding deposit differs from known major types of sediment-hosted Zn–Pb deposits in the world, including sandstone-type (SST), Mississippi Valley type (MVT) and sedimentary-exhalative (SEDEX). Although the fine-grained ore texture and high Zn/Pb ratios are similar to those in SEDEX deposits, the Jinding deposit lacks any exhalative sedimentary rocks. Like MVT deposits, Jinding is characterised by simple mineralogy, epigenetic features and involvement of basinal brines in mineralisation, but its host rocks are mainly sandstones and breccia-bearing sandstones. The Jinding deposit is also different from SST deposits with its high Zn/Pb ratios, among other characteristics. Most importantly, the Jinding deposit was formed in an intracontinental terrestrial basin with an active tectonic history in relation to plate collision, and mantle-sourced fluids and metals played a major role in ore formation, which is not the case for SEDEX, MVT, and SST. We propose that Jinding represents a new type of sediment-hosted Zn–Pb deposit, named the ‘Jinding type’.     

岔路口特大型钼多金属矿床的发现及其意义

黑龙江岔路口矿床是近年来在大兴安岭地区北部找到的一处特大型斑岩钼多金属矿床,其产出规模已居中国北方钼多金属矿床之首.钼多金属矿化大部分在侏罗系火山-沉积岩中,呈细脉状、细脉浸染状产出,并与晚侏罗世石英斑岩、花岗斑岩和隐爆角砾岩具有密切的时空分布关系.初步研究表明,该矿床无论是在产出环境、地质特征上,还是在含矿侵入岩岩石...     

论宁夏金场子渗流热卤水-表生改造型金矿床的矿源

稳定同位素、岩石微量元素(金)和地质特征研究的结果,表明金场子金矿床的成矿物质来源系上地壳源,并且金、银、铅、铜等金属和硫、硒、砷、氯、氟、碳等来源于石炭纪和泥盆纪沉积岩。成矿流体是大气水和沉积地层水的混合溶液。金矿化与地热流体渗流热卤水成矿作用和表生风化成矿作用有关。     

Emarat carbonate-hosted Zn–Pb deposit, Markazi Province, Iran: A geological, mineralogical and isotopic (S, Pb) study

The Emarat deposit, with a total proved reserve of 10 Mt ore grading 6% Zn and 2.26% Pb, is one of the largest Zn–Pb deposits in the Malayer–Esfahan belt. The mineralization is stratabound and restricted to Early Cretaceous limestones and dolomites. The ore consists mainly of sphalerite and galena with small amounts of pyrite, chalcopyrite, calcite, quartz, and dolomite. Textural evidence shows that the ore has replaced the host rocks and thus is epigenetic.Sulfur isotopes indicate that the sulfur in sphalerite and galena has been derived from Cretaceous seawater through thermochemical sulfate reduction. Sulfur isotope compositions of four apparently coprecipitated sphalerite–galena pairs suggest their precipitation was under equilibrium conditions. The sulfur isotopic fractionation observed for the sphalerite–galena pairs corresponds to formation temperatures between 77 °C and 168 °C, which agree with homogenization temperatures of fluid inclusions.Lead-isotope studies indicate that the lead in galena has been derived from heterogeneous sources including orogenic and crustal reservoirs with high ²³⁸U/²⁰⁴Pb and ²³²Th/²⁰⁴Pb ratios. Ages derived from the Pb-isotope model give meaningless ages, ranging from Early Carboniferous to future. It is probable that the Pb-isotope model ages that point to an earlier origin than the Early Cretaceous host rocks are derived from older reservoirs in the underlying Carboniferous or Jurassic units, either from the host rocks or from earlier-formed ore deposits within these units.This research and other available data show that the Emarat Zn–Pb deposit has many important features of Mississippi Valley-type (MVT) lead–zinc deposits and thus we argue that it is an MVT-type ore deposit.     

Genetic and metamorphic conditions constrained by fluid inclusions from Paleoproterozoic (c. 1.8 Ga) magnesite ore deposits, NE Brazil

Precambrian magnesite occurrences hosted by metadolomites from the Orós belt, Ceará, Brazil, are part of a greenschist–amphibolite, metavolcano-sedimentary terrain, dated at 1.8 Ga, cut by Meso- to Neoproterozoic Brasiliano granites and Neoproterozoic basic sills. These rocks were affected by a shear zone between 580 and 500 Ma. The magnesite-bearing marbles can be grouped as medium-grained (1–9 mm) at the Riacho Fundo ore deposit or sparry magnesite (1–15 cm) at the Cabeça de Negro ore deposit. The sparry magnesite shows textural characteristics related to original sedimentary structures. Both types of magnesite-bearing marbles contain aqueous and aqueous-carbonic fluid inclusions that yield homogenization temperatures between 170 and 370 °C. Applying a pressure correction, these temperatures are compatible with the evolution from greenschist to amphibolite facies metamorphic conditions, as described in previous work on the Orós region. It also agrees with data in specialized literature on the metamorphism of carbonate rocks. Fluid inclusion distribution, composition, and physical-chemical characteristics suggest temperature increase, probably related to metamorphism on these rocks. The medium-grained magnesite records partial contamination of CO₂-rich inclusions by relict carbonaceous material (bitumen, hydrocarbons?) that favors, but does not confirm, a syngenetic sedimentary origin and could have caused the lowering of CO₂ melting point in these inclusions. Therefore, though textural evidence points to a sedimentary-diagenetic model, fluid inclusions record conditions of a metamorphic event.     

Geology and geothermometry of vein-type W-Sn deposits at Pennaichaung and Yetkanzintaung Prospects,Tavoy Township,Tennasserim Division,southern Burma

The Pennaichaung and Yetkanzintaung W-Sn Prospects are located in Tavoy Township, Tennasserim Division, southern Burma. The W-Sn mineralization at the Pennaichaung is closely related with a small, satellitic granitoid pluton of presumably Late Mesozoic age, which intruded the metaclastic rocks of Mergui Group (mostly Carboniferous). The mineralized quartz veins at the Pennaichaung penetrated the granitoid-metasedimentary rocks contact. In contrary to the Pennaichaung deposit, the W-Sn veins at the Yetkanzintaung are exclusively in the metasedimentary rocks of slates and quartzites of Margui Group. Mineralized quartz veins in the Pennaichaung area trend NNE-SSW, NW-SE and NE-SW with a maximum thickness of 30 cm, but only quartz veins trending NNE-SSW are found to be productive and contained economically workable wolframite and cassiterite. Majority of the mineralized quartz veins in the Yetkanzintaung area trend approximately N-S with easterly dip of 50°–70°. The thickness of the ore veins in the Yetkanzintaung area are thinner than those of the Pennaichaung and range from 1 cm to 20 cm with an average width of 5 cm. Fluid inclusion studies of the quartz from the ore veins cutting the granitoid in the Pennaichaung area have yielded a filling temperature range of 170°–270°C with a maximum mode of 220°C, while quartz crystals from the ore veins in the nearby metasedimentary rocks gave a filling temperature range of 140°–220°C with a maximum mode of 160°C. Hence, the Pennaichaung deposit was thought to have emplaced under a filling temperature range of 140°–270°C. A similar low filling temperature range was recorded for the Yetkanzintaung deposit. Quartz from the Yetkanzintaung ore veins have yielded filling temperatures of 200°–240°C, whereas the fluorites associated with the mineralized quartz veins gave a temperature range of 140°–160°C. Limited freezing runs indicate a salinity of less than 5 NaCl equivalent weight percent for inclusions in quartz from both orebodies. No fluid inclusion evidence of boiling of ore fluids nor presence of liquid CO₂ was observed in this study. Thus, the ore fluids responsible for the W-Sn mineralization at the Pennaichaung and Yetkanzintaung areas were of low temperature, diluted, CO₂-deficient, NaCl brines.     

The San Jorge porphyry copper deposit, Mendoza, Argentina: a combination of orthomagmatic and hydrothermal mineralization

The San Jorge porphyry copper deposit (SJPCD) is hosted by Carboniferous clastic sedimentary rocks and Permian intrusions located within the Permo-Triassic belt of Chile and Argentina. Its hypogene mineralization and alteration are products of superposed orthomagmatic and hydrothermal events that were strongly fault controlled. Copper related to orthomagmatic processes includes disseminated chalcopyrite in the matrix of porphyritic granodiorite and andesite, and chalcopyrite with tourmaline and quartz in breccias, both of which have accompanying potassic alteration. Soon thereafter, disseminated chalcopyrite is associated with a structurally controlled silicification of the sedimentary sequence. Finally, multiple episodes of hydrofracturing, probably driven by a deep-seated intrusion, deposited sulfide minerals in veinlets throughout the sedimentary sequence; the centers of these systems are characterized by potassic alteration. Total sulfides, which include chalcopyrite, pyrite, arsenopyrite, and pyrrhotite, and pyrite:chalcopyrite form a linear NNE trend, parallel to the main faults. Quartz–sericite is the dominant alteration and is ubiquitous. Zones of potassic alteration can be delineated even though phyllic alteration can be superposed. Much of the system evolved under reducing conditions. Despite uplift along a reverse fault during the Tertiary, and subsequent erosion, the system is preserved at high levels. Supergene processes redistributed copper in secondary oxides and sulfides. These processes were more effective where the deposit is covered by unconsolidated alluvial sediments. The unique history of the San Jorge deposit renders it an important variation of porphyry copper-style mineralization.