RELOCATION OF THE HUTUBI MS6.2 EARTHQUAKE SEQUENCE ON 8 DECEMBER 2016 AND ANALYSIS OF THE SEISMOGENIC STRUCTURE

Based on the digital waveforms of Xinjiang Seismic Network, the Hutubi M_S6.2 earthquake sequence (M_L ≥ 1.0) was relocated precisely by HypoDD.The best double-couple focal mechanisms of the main shock and aftershocks of M_L ≥ 4.0 were determined by the CAP method. We analyzed the characteristics of spatial distribution, focal mechanisms and the seismogenic structure of earthquake sequence. The results show that the main shock is located at 43.775 9°N, 86.363 4°E; the depth of the initial rupture and centriod is about 15.388km and 17km. The earthquake sequence extends unilaterally along NWW direction with an extension length of about 15km and a depth ranging 5~15km. The characteristics of the depth profiles show that the seismogenic fault plane dips northward and the faulting is dominated by thrusting. The nodal planes parameters of the best double-couple focal mechanisms are:strike 292°, dip 62° and rake 80° for nodal plane I, and strike 132°, dip 30° and rake 108° for nodal plane Ⅱ, indicating that the main shock is of thrust faulting. The dip of nodal planeⅠis consistent with the dip of the depth profile, which is inferred to be the fault plane of seismogenic fault of this earthquake. According to the comprehensive analysis of the relocation results, the focal mechanism and geological structure in the source region, it is preliminarily inferred that the seismogenic structure of the Hutubi M_S6.2 earthquake may be a backthrust on the deeper concealed thrust slope at the south of Qigu anticline. The earthquake is a "folding" earthquake taking place under the stress field of Tianshan expanding towards the Junggar Basin.     

RELOCATION OF THE 23 NOVEMBER 2017 WULONG MS5.0 EARTHQUAKE SEQUENCE AND ANALYSIS OF ITS SEISMOGENIC FAULT

The Wulong M_S5.0 earthquake on 23 November 2017, located in the Wolong sap between Wenfu, Furong and Mawu faults, is the biggest instrumentally recorded earthquake in the southeastern Chongqing. It occurred unexpectedly in a weak earthquake background with no knowledge of dramatically active faults. The complete earthquake sequences offered a significant source information example for focal mechanism solution, seismotectonics and seismogenic mechanism, which is helpful for the estimation of potential seismic sources and level of the future seismic risk in the region. In this study, we firstly calculated the focal mechanism solutions of the main shock using CAP waveform inversion method and then relocated the main shock and aftershocks by the method of double-difference algorithm. Secondly, we determined the seismogenic fault responsible for the M_S5.0 Wulong earthquake based on these calculated results. Finally, we explored the seismogenic mechanism of the Wulong earthquake and future potential seismic risk level of the region. The results show the parameters of the focal mechanism solution, which are:strike24°, dip 16°, and rake -108° for the nodal plane Ⅰ, and strike223°, dip 75°, and rake -85° for the nodal plane Ⅱ. The calculations are supported by the results of different agencies and other methods. Additionally, the relocated results show that the Wulong M_S5.0 earthquake sequence is within a rectangular strip with 4.7km in length and 2.4km in width, which is approximately consistent with the scales by empirical relationship of Wells and Coppersmith(1994). Most of the relocated aftershocks are distributed in the southwest of the mainshock. The NW-SE cross sections show that the predominant focal depth is 5~8km. The earthquake sequences suggest the occurrence features of the fault that dips northwest with dip angle of 63° by the least square method, which is largely consistent with nodal planeⅡof the focal mechanism solution. Coincidentally, the field outcrop survey results show that the Wenfu Fault is a normal fault striking southwest and dipping 60°~73° by previous studies. According to the above data, we infer that the Wenfu Fault is the seismogenic structure responsible for Wulong M_S5.0 earthquake. We also propose two preliminary genetic mechanisms of "local stress adjustment" and "fluid activation effect". The "local stress adjustment" model is that several strong earthquakes in Sichuan, such as M8.0 Wenchuan earthquake, M7.0 Luzhou earthquake and M7.0 Jiuzhaigou earthquake, have changed the stress regime of the eastern margin of the Sichuan Basin by stress transference. Within the changed stress regime, a minor local stress adjustment has the possibility of making a notable earthquake event. In contract, the "fluid activation effect" model is mainly supported by the three evidences as follows:1)the maximum principle stress axial azimuth is against the regional stress field, which reflects NWW-SEE direction thrusting type; 2)the Wujiang River crosscuts the pre-existing Wenfu normal fault and offers the fluid source; and 3)fractures along the Wenfu Fault formed by karst dissolution offer the important fluid flow channels.     

2021年吴忠—灵武ML3.6震群重新定位及震源机制研究

2021年7月18日—8月7日,宁夏吴忠—灵武地区发生M_L3.6显著震群活动。本文利用多阶段定位方法对该震群进行了重新定位,并根据gCAP方法反演了2021年7月20日灵武M_L3.6地震的震源机制及震源矩心深度,采用Snoke方法计算了震群中3次M_L3.0以上地震的震源机制,测定了同一地震多个震源机制的中心解。结果表明,该震群中最大的地震即7月20日02时40分M_L3.6地震的震源机制为节面Ⅰ走向289°,倾角72°,滑动角?22°,节面Ⅱ走向26°,倾角69°,滑动角?161°,震源矩心深度为12 km,初始破裂深度为12.5 km;7月20日03时15分M_L3.2地震的震源机制为节面Ⅰ走向290°,倾角82°,滑动角?2°,节面Ⅱ走向20°,倾角88°,滑动角?172°,初始破裂深度为11.9 km;7月21日04时55分M_L3.1地震的震源机制为节面Ⅰ走向285°,倾角53°,滑动角2°,节面Ⅱ走向194°,倾角88°,滑动角143°,初始破裂深度为11.6 km,这些地震震源机制的主压应力轴主要为NE向。该震群序列的震源深度主要相对集中在7—15 km之间,其中M_L3.0以上地震的震源深度主要介于11—13 km,震源深度剖面显示震群相对集中的区域由深到浅大体呈现近似于陡立的展布。本文进一步研究发现区域应力场在灵武M_L3.6地震震源机制NNE向节面产生的相对剪应力为0.393,而在NWW向节面产生的相对剪应力为0.945。结合地质构造和已有断层资料初步分析认为,若NNE向的崇兴隐伏断裂为灵武M_L3.6地震的发震断层,则表明崇兴断裂可能是一条断裂薄弱带,地震破裂方式主要为右旋走滑;若NWW向的未知隐伏断裂为发震断层,则表明NWW向断裂可能为该地震在区域应力场下的剪应力相对最大释放节面,其破裂方式为左旋走滑。      

2008年8月30日攀枝花-会理6.1级地震序列 ML≥4.0事件的震源机制解

针对2008年8月30日在四川攀枝花-会理发生的M_s6.1地震序列,本研究基于四川和云南两省数字地震台网的宽频带波形记录,采用CAP方法反演了该序列主震及M_L≥4.0余震的震源机制解.结果显示:主震震源机制解的两个主应力轴仰角小于10°,其中,主压力轴方位为140°;节面之一走向185°、西倾83°、滑动角5°,显示左旋走滑略兼逆冲分量的断层作用性质.结合余震、烈度分布以及震区的活动构造,判定该节面代表了主震的发震断层面,相应的发震断层应是穿越震区的近南北向红格断裂(南段).本研究还获得主震震源机制解的最佳拟合误差深度为10 km,与该事件的定位结果相一致.该序列中6次M_L≥4.0余震也具有与主震类似的震源机制解.分析初步表明:空间上,2008年攀枝花-会理M_s6.1地震序列的震源机制解与研究区内更早地震的震源机制解具有良好的协调性,反映了该序列是在川滇地块SE-SSE向水平运动的背景下、沿近S-N向红格断裂发生左旋走滑略兼逆冲运动的结果.     

STUDY ON THE SEISMOGENIC FAULT AND DYNAMICS PARAME-TERS OF THE 2014 MS6.6 JINGGU EARTHQUAKE IN YUNNAN

On October 17, 2014, a M_S6.6 earthquake occurred in Jinggu, Yunnan. The epicenter was located in the western branch of Wuliang Mountain, the northwest extension line of Puwen Fault. There are 2 faults in the surrounding area, one is a sinistral strike-slip and the other is the dextral. Two faults have mutual intersection with conjugate joints property to form a checkerboard faulting structure. The structure of the area of the focal region is complex. The present-day tectonic movement is strong, and the aftershock distribution indicates the faulting surface trending NNW. There is no obvious surface rupture related to the known fault in the epicenter, and there is a certain distance from the surface of the Puwen fault zone. Regional seismic activity is strong. In 1941, there were two over magnitude 7.0 earthquakes in the south of the epicenter of Jinggu County and Mengzhe Town. In 1988, two mainshock-aftershock type earthquakes occurred in Canglan-Gengma Counties, the principal stress axes of the whole seismic area is in the direction of NNE. Geological method can be adopted to clarify the distribution of surficial fracture caused by active faults, and high-precision seismic positioning and spatial distribution characteristics of seismic sequences can contribute to understand deep seismogenic faults and geometric features. Thus, we can better analyze the three-dimensional spatial distribution characteristics of seismotectonics and the deep and shallow tectonic relationship. The focal mechanism reveals the property and faulting process to a certain extent, which can help us understand not only the active property of faults, but also the important basis for deep tectonic stress and seismogenic mechanism. In order to study the fault characteristic of the Jinggu earthquake, the stress field characteristics of the source area and the geometric parameters of the fault plane, this paper firstly uses the 15 days aftershock data of the Jingsuo M_S6.6 earthquake, to precisely locate the main shock and aftershock sequences using double-difference location method. The results show that the aftershock sequences have clustering characteristics along the NW direction, with a depth mainly of 5~15km. Based on the precise location, calculations are made to the focal mechanisms of a total of 46 earthquakes including the main shock and aftershocks with M_L ≥ 3.0 of the Jinggu earthquake. The double-couple(DC)component of the focal mechanism of the main shock shows that nodal plane Ⅰ:The strike is 239°, the dip 81°, and the rake -22°; nodal plane Ⅱ, the strike is 333°, the dip 68°, and the rake -170.31°. According to focal mechanism solutions, there are 42 earthquakes with a focal mechanism of strike-slip type, accounting for 91.3%. According to the distribution of the aftershock sequence, it can be inferred that the nodal plane Ⅱ is the seismogenic fault. The obtained focal mechanism is used to invert the stress field in the source region. The distribution of horizontal maximum principal stress orienation is concentrated. The main features of the regional tectonic stress field are under the NNE-SSW compression(P axis)and the NW-SE extension(T axis)and are also affected by NNW direction stress fields in the central region of Yunnan, which indicates that Jinggu earthquake fault, like Gengma earthquake, is a new NW-trending fault which is under domination of large-scale tectonic stress and effected by local tectonic stress environment. In order to define more accurately the occurrence of the fault plane of the Jinggu earthquake, with the precise location results and the stress field in the source region, the global optimal solution of the fault plane parameters and its error are obtained by using both global searching simulated annealing algorithm and local searching Gauss-Newton method. Since the parameters of the fault plane fitting process use the stress parameters obtained by the focal mechanism inversion, the data obtained by the fault plane fitting is more representative of the rupture plane, that is, the strike 332.75°, the dip 89.53°, and the rake -167.12°. The buried depth of the rupture plane is 2.746km, indicating that the source fault has not cut through the surface. Based on the stress field characteristics and the inversion results of the fault plane, it is preliminarily believed that the seismogenic structure of the Jinggu earthquake is a newly generated nearly vertical right-lateral strike-slip fault with normal component. The rupture plane length is about 17.2km, which does not extend to the Puwen fault zone. Jinggu earthquake occurred in Simao-Puer seismic region in the south of Sichuan-Yunnan plate. Its focal mechanism solution is similar to that of the three sub-events of the Gengma earthquake in November 1988. The seismogenic structure of both of them is NW-trending and the principal stress is NE-SW. The rupture plane of the Jinggu main shock(NW direction)is significantly different from the known near NS direction Lancang Fault and the near NE direction Jinggu Fault in the study area. It is preliminarily inferred that the seismogenic structure of this earthquake has a neogenetic feature.     

芦山7.0级地震序列的震源位置与震源机制解特征

基于中国国家和四川区域数字地震台网记录,采用HypoDD方法精确定位了四川芦山M_L2.0级以上地震序列的震源位置,采用CAP方法反演了36次M_L4.0级以上地震的最佳双力偶震源机制解,并利用小震分布和区域应力场拟合了可能存在的发震断层面参数,从而综合分析了芦山地震序列的震源深度、震源机制和震源破裂面特征,探讨可能的发震构造.结果显示,7.0级主震的震源位置为30.30°N、102.97°E,初始破裂深度为15 km左右,震源矩心深度为14 km左右,最佳双力偶震源机制解的两组节面分别为走向209°/倾角46°/滑动角94°和走向23°/倾角44°/滑动角86°,可视为纯逆冲型地震破裂,绝大多数M_L4.0级以上余震的震源机制也表现出与主震类似的逆冲破裂特征.M_L2.0级以上余震序列发生在主震两侧,集中分布的长轴为30 km左右,震源深度主要集中在5～27 km,M_L3.5级以上较大余震则集中分布在9～25 km的深度上,并揭示出发震断层倾向北西的特征.利用小震分布和区域应力场拟合得到发震断层参数为走向207°/倾角50°/滑动角92°,绝大多数余震发生在断层面附近10 km左右的区域.综合地震序列分布特征、主震震源深度和已有破裂过程研究结果,可以推测主震破裂过程自初始点沿断层的两侧扩展破裂,南侧破裂比北侧稍长,滑动量主要集中在初始破裂点附近,可能没有破裂到地表.综合本文研究成果、地震烈度分布和现有的科学考察结果,初步推测发震构造为龙门山山前断裂,也不排除主震震中东侧还存在一条未知的基底断裂发震的可能性.     

FOCAL FAULTS AND STRESS FIELD CHARACTERISTICS OF M7.0 JIUZHAIGOU EARTHQUAKE SEQUENCE IN 2017

On August 8, 2017, Beijing time, an earthquake of M7.0 occurred in Jiuzhaigou County, Aba Prefecture, Sichuan Province, with the epicenter located at 33.20°N 103.82°E. The earthquake caused 25 people dead, 525 people injured, 6 people missing and 170000 people affected. Many houses were damaged to various degrees. Up to October 15, 2017, a total of 7679 aftershocks were recorded, including 2099 earthquakes of M ≥ 1.0. The M7.0 Jiuzhaigou earthquake occurred in the northeastern boundary belt of the Bayan Har block on the Qinghai-Tibet Plateau, where many active faults are developed, including the Tazhong Fault(the eastern segment of the East Kunlun Fault), the Minjiang fault zone, the Xueshan fault zone, the Huya fault zone, the Wenxian fault zone, the Guanggaishan-Daishan Fault, the Bailongjiang Fault, the Longriuba Fault and the Longmenshan Fault. As one of the important passages for the eastward extrusion movement of the Qinghai-Tibet Plateau(Tapponnier et al., 2001), the East Kunlun fault zone has a crucial influence on the tectonic activities of the northeastern boundary belt of Bayan Kala. Meanwhile, the Coulomb stress, fault strain and other research results show that the eastern boundary of the Bayan Har block still has a high risk of strong earthquakes in the future. So the study of the M7.0 Jiuzhaigou earthquake' seismogenic faults and stress fields is of great significance for scientific understanding of the seismogenic environment and geodynamics of the eastern boundary of Bayan Har block. In this paper, the epicenter of the main shock and its aftershocks were relocated by the double-difference relocation method and the spatial distribution of the aftershock sequence was obtained. Then we determined the focal mechanism solutions of 24 aftershocks(M ≥ 3.0)by using the CAP algorithm with the waveform records of China Digital Seismic Network. After that, we applied the sliding fitting algorithm to invert the stress field of the earthquake area based on the previous results of the mechanism solutions. Combining with the previous research results of seismogeology in this area, we discussed the seismogenic fault structure and dynamic characteristics of the M7.0 Jiuzhaigou earthquake. Our research results indicated that:1)The epicenters of the M7.0 Jiuzhaigou earthquake sequence distribute along NW-SE in a stripe pattern with a long axis of about 35km and a short axis of about 8km, and with high inclination and dipping to the southwest, the focal depths are mainly concentrated in the range of 2~25km, gradually deepening from northwest to southeast along the fault, but the dip angle does not change remarkably on the whole fault. 2)The focal mechanism solution of the M7.0 Jiuzhaigou earthquake is:strike 151°, dip 69° and rake 12° for nodal plane Ⅰ, and 245°, 78° and -158° for nodal plane Ⅱ, the main shock type is pure strike-slip and the centroid depth of the earthquake is about 5km. Most of the focal mechanism of the aftershock sequence is strike-slip type, which is consistent with the main shock's focal mechanism solution; 3)In the earthquake source area, the principal compressive stress and the principal tensile stress are both near horizontal, and the principal compressive stress is near east-west direction, while the principal tensile stress is near north-south direction. The Jiuzhaigou earthquake is a strike-slip event that occurs under the horizontal compressive stress.     

2014年11月22日康定M6.3级地震序列发震构造分析

2014年11月22日在NW向鲜水河断裂带中南段四川康定县发生M6.3级地震,11月25日在该地震震中东南约10km处再次发生M5.8级地震.基于中国国家数字地震台网和四川区域数字地震台网资料,采用多阶段定位方法对本次康定M6.3级地震序列进行了重新定位;利用gCAP(generalized Cut And Paste)矩张量反演方法获得了M6.3和M5.8级地震的震源机制解与矩心深度,分析了本次地震序列的发震构造,并结合历史强震破裂时空分布和2001年以来小震重新定位结果,对鲜水河断裂带中段强震危险性进行了初步探讨.获得的主要结果如下:(1)M6.3级主震震中位于101.69°E、30.27°N,震源初始破裂深度约10km,矩心深度9km;M5.8级地震震中位于101.73°E、30.18°N,初始破裂深度约11km,矩心深度9km.gCAP矩张量反演结果揭示这两次地震双力偶分量占主导,M6.3级地震的最佳双力偶解节面Ⅰ走向143°/倾角82°/滑动角-9°,节面Ⅱ走向234°/倾角81°/滑动角-172°.M5.8级地震最佳双力偶解节面Ⅰ走向151°/倾角83°/滑动角-6°,节面Ⅱ走向242°/倾角84°/滑动角-173°.依据余震分布长轴展布与断裂走向,判定节面Ⅰ为发震断层面,M6.3和M5.8级地震均为带有微小正断分量的左旋走滑型地震.(2)序列中重新定位的459个地震平均震源深度约9km,地震主要集中分布在6~11km深度区间,余震基本发生在M6.3和M5.8级地震震源上部.依据余震密集区展布范围,推测本次康定地震的震源体尺度长约30km、宽约4km、深度范围约6km.M6.3级主震震源附近的余震稀疏区可能是一个较大的凹凸体(asperity),在主震中能量得以充分释放.(3)最初3天的余震主要分布在M6.3级地震NW侧;而M5.8级地震之后的余震主要集中在其震中附近.M6.3级地震以及最初3天的绝大部分余震发生在倾角约82°近直立的NW走向色拉哈断裂上;M5.8级地震与其后的多数余震发生在倾角约83°近直立的NW走向折多塘断裂北端走向向北偏转部位,M5.8级地震可能是M6.3级地震触发相邻的折多塘断裂活动所致.(4)康定M6.3与M5.8级地震发生在鲜水河断裂带乾宁与康定之间的色拉哈强震破裂空段,本次地震破裂尺度较小,尚不足以填补该强震空段.色拉哈段以及相邻的乾宁段7级地震平静时间均已超过其平均复发周期估值,未来几年存在发生7级地震的危险.康定M6.3级地震序列基本填补了震前存在于塔公与康定之间的深部小震空区,未来强震发生在塔公至松林口段深部小震稀疏区内的可能性很大.     

CHARACTERISTICS OF TECTONIC STRESS FIELD OF THE XIAOWAN RESERVOIR BEFORE AND AFTER THE IMPOUNDMENT

Using the seismic waveform data of Xiaowan seismic network and Yunnan seismic network, we determined the focal mechanisms of 36 earthquakes(M_L ≥ 3.0)from Jun. 2005 to Dec. 2008 and 51 earthquakes(M_L ≥ 2.5)from Jan. 2009 to Dec. 2015 by generalized polarity and amplitude technique. We inverted tectonic stress field of the Xiaowan reservoir before impounding, using the focal mechanisms of 36 earthquakes(M_L ≥ 3.0)from Jun. 2005 to Dec. 2008 and CAP solutions of 58 earthquakes(M_L ≥ 4.0)collected and the solutions in the Global Centroid Moment Tensor(GCMT)catalog; We inverted local stress field of the reservoir-triggered earthquake clustering area, using 51 earthquakes(M_L ≥ 2.5)from Jan. 2009 to Dec. 2015. Focal mechanisms statistics show that, the Weixi-Qiaohou Fault is the seismic fault. Focal mechanisms were strike-slip type in initial stage, but normal fault type in later stage. Focal depths statistics of 51 earthquakes(M_L ≥ 2.5)show that, the average value of focal depths in period Ⅰ, period Ⅱ and period Ⅲ are 8.2km, 7.3km and 7.8km respectively and the standard deviations are 4.3km, 3.5km and 6.0km respectively. The average value of focal depths is basically stable in different period, only the standard deviation is slightly different. Therefore, there is not positive connection between focal depth and deviation of focal mechanisms. What's more, there are 2 earthquakes(number 46 and number 47 in Fig.5 and Table 3)with almost the same magnitude, epicenter and focal depth, but they have different faulting types as normal and strike-slip. The focal mechanism of event No.46 is strike:302°, dip:40° and rake:-97° for plane Ⅰ, however, the focal mechanism of event No.47 is strike:292°, dip:82° and rake:140° for plane Ⅰ. Likewise, earthquake of number 3 and number 18 have similar characteristic. Therefore, the obvious focal mechanism difference of similar earthquake pair indicates the complexity of Weixi-Qiaohou Fault. Considering the quiet-active character of reservoir-triggered earthquakes, we discussed the change of local stress field in different period. The σ₁ of tectonic stress field was in the near-south direction, with a dip angle of 14° before the impoundment, however, the direction of σ₁ of local stress field changed continuously, with the dip angle getting larger after the impoundment. The direction of σ₁ of local stress field of reservoir-triggered earthquake clustering area is close to the strike of Weixi-Qiaohou Fault, and reservoir impoundment increased the shear stress in the fault, so the weakening of fault was beneficial to trigger earthquakes. Comprehensive analysis suggests that fluid permeation and pore pressure diffusion caused by the water impounding, and the weakening of fault caused by local stress field are the key factors to trigger earthquake in the Xiaowan reservoir.     

2019年黄海ML4.6地震序列的震源机制和发震构造

2019年黄海M_L4.6地震序列发生在NW向苏北—滨海断裂带附近,历史上该断裂带附近曾多次发生破坏性地震。为了判断此次地震序列的发生是否与苏北—滨海断裂带活动有关,本文基于黄海M_L4.6地震震中附近400 km范围内的测震台站记录,采用CAP方法计算了此次黄海地震序列中M_L4.6和M_L4.1地震的深度和震源机制解参数,并使用双差定位方法对该地震序列进行了重新定位。研究结果显示:2019年12月8日黄海M_L4.6和12日黄海M_L4.1地震的震源深度分别为20 km和21 km,位于发震区域的脆韧转换带内;黄海M_L4.6地震震源机制解节面Ⅰ的走向、倾角、滑动角分别为123°,74°和61°,节面Ⅱ的走向、倾角、滑动角分别为6°,33°和149°;黄海M_L4.1地震震源机制解节面Ⅰ的走向、倾角、滑动角分别为135°,77°和32°,节面Ⅱ的走向、倾角、滑动角分别为37°,59°和165°。两次地震的震源机制解节面参数与苏北—滨海断裂带的几何参数并不一致,表明此次黄海地震序列的发生与苏北—滨海断裂带的主断裂活动没有直接关系。黄海地震序列震中的重新定位结果显示该地震序列呈NW向分布。由上述反演所获的两次黄海地震的震源机制和地震序列的重新定位结果推测,黄海M_L4.6和M_L4.1地震的破裂方向可能为NW向,黄海M_L4.6地震序列可能是发生在区域壳内脆韧转换带的左旋走滑地震事件。      

THE PRELIMINARY STUDY ON THE SEISMOGENIC STRUCTURE OF THE HUTUBI MS6.2 EARTHQUAKE

Based on the phase report of Xinjiang Seismic Network, the Hutubi M_S6.2 earthquake sequence M_L ≥ 1.0 was relocated by the HypoDD method. The results show that the aftershocks were distributed along NE and NW direction. The aftershocks were in the depths of 5~15km. In addition, by using the digital waveforms of Xinjiang Seismic Network, the best double-couple focal mechanism of the main shock and some aftershocks of M_S ≥ 3.8 were determined by the CAP method. Based on the above studies, the source depth, focal mechanism and aftershock distribution of the Hutubi M_S6.2 earthquake were analyzed and the seismogenic structure was discussed. The nodal plane parameters of the best double-couple focal mechanism are strike 144°, dip 26°, rake 118°, and strike 293°, dip 67°, rake 77°, respectively. The moment magnitude M_W is about 5.9, with centroid depth of 15.2km. These show that the main shock was a thrust type. Most focal mechanism solutions of the aftershocks were shown as a thrust type, which are similar to the main shock. It is speculated that the possible seismogenic fault of this earthquake is the Huorgosi-Manas-Tugulu Fault.     

2013-2014年山东乳山地震序列发震构造初探

采用结合波形互相关技术的双差定位方法,对2013—2014年山东乳山地震序列重新定位,通过CAP及P波初动方法确定乳山序列较大地震的震源机制,在此基础上初步探讨乳山地震序列发震构造.结果显示,乳山序列呈现NW向展布,地震密集分布在8km×3km范围,震源深度分布在4~10km,4~7km区间相对集中.较大地震震源机制的节面Ⅰ方向与序列地震优势分布方向基本一致.综合考虑精确定位结果及较大地震震源机制,并结合震区附近地震资料,初步推测乳山地震序列发震断层为NW方向、近直立的走滑型隐伏断裂.     

ANALYSIS ON THE 2013 BADONG M5.1 EARTHQUAKE SEQUENCE AND THE SEISMOGENIC STRUCTURE

On 16^th September 2013, an M5.1 earthquake occurred in Badong County, Hubei Province, which is the biggest one since the first water impounding in 2003 in the head region of the Three Gorges Reservoir area. The crustal velocity information is needed to determine the earthquake location and focal mechanism. By comparison, the 1-D velocity structure model from Zhao was adopted in this study. Double difference location method was applied to determine the precise locations of the M5.1 earthquake sequence. Relocation results show that the dominant distribution of this sequence is along NEE direction. In order to understand its seismogenic structure, focal depth profiles were made. Profile AA' was along the sequence distribution, and the earthquake sequence extended about 12km. Focal depth of mainshock is deeper than that of aftershocks, and earthquake rupture propagated laterally southwestward. The seismic profile BB' and CC' were perpendicular to profile AA', which represent the dip direction. Both profiles show that the focal depth becomes deeper toward southeast, and dip angle is about 50°. It means that the possible seismogenic fault strikes NEE and dips southeast. Focal mechanism could provide more information for judging the seismogenic structures. Many methods could obtain the focal mechanism, such as P-wave first motion method, CAP method, and some other moment tensor methods. In this paper, moment tensor inversion program made by Yagi Y is adopted. 12 regional seismic stations ranging from 100~400km are picked up, and before the inversion, we removed the mean and trend. The seismic waveforms were band pass filtered between 0.05 and 0.2Hz, and then integrated into displacement. Green's functions were calculated using the discrete wavenumber method developed by Kohketsu. The focal mechanism of the M5.1 mainshock manifests that the NEE-striking fault plane probably is the possible seismogenic fault, which is consistent with the analysis of focal depth profiles. The focal mechanisms of the M_L≥2.0 aftershocks are retrieved by P-wave first motion method, and the nodal plane I is in accordance with the earthquake sequence distribution and the fault plane of the mainshock. FMSI program was adopted to inverse the stress field in the earthquake area, and the results show that the earthquake sequence is under the control of the regional stress field. The earthquake sequence occurred on the stage of slow water unloading, and ETAS model was introduced to testify the influences of water level fluctuations on earthquakes. The results denote that the reservoir played a triggering role in the earthquake, however, the NEE-striking seismogenic fault is the controlling factor.     

MECHANISM OF THE 2015 PISHAN,XINJIANG, MS6.5 MAINSHOCK AND RELOCATION OF ITS AFTERSHOCK SEQUENCES

Using the digital broadband seismic data recorded by Xinjiang network stations, we obtained focal mechanism of the July 3 Pishan, Xinjiang, M_S6.5 earthquake with generalized Cut and Paste(gCAP)inversion method. The strike, dip and rake of first nodal plane are 97°, 27°, 51°, and the second nodal plane are 318°, 70°, 107°. The centroid depth and moment magnitude are calculated to be 12km and 6.4. Combining with the distribution of aftershocks, we conclude that the first nodal plane is the seismogenic fault, and the main shock presents a thrust earthquake at low angle. We relocated 1014 earthquakes using the double-difference algorithm, and finally obtained 937 relocated events. Our results show that the earthquake sequences clearly demonstrate a unilateral extension about 50km nearly in NWW direction, and are mainly located above 25km depth, especially the small earthquakes are predominately located at the shallow parts. Furthermore, the focal depth profile shows a southwestward dipping fault plane at the main shock position, suggesting listric thrust faulting, which is consistent with the dip of the mainshock rupture plane. The spatial distribution of aftershocks represents that the Tarim block was thrust under the West Kunlun orogenic belt. In addition, the dip angle of the fault plane gradually increases along the NWW direction, possibly suggesting a gradual increase of strike-slip component during the NWW rupturing process. From above, we conclude that the Pishan M_S6.5 earthquake is the result of Tibet plateau pushing onto the Tarim block from south to north, which further confirms that the continuous collision of India plate and Eurasia plate has strong influence on the seismic activity in and around the Tibet plateau.     

MATCH AND LOCATE FOR SMALL EVENT DETECTION OF NINGXIA SHIZUISHAN EARTHQUAKE SWARM AND INVESTIGATION OF ITS SEISMOGENIC FAULT

In this paper, a new method for small event detection named Match & Locate(M&L)is used to detect and locate the small earthquakes that are missing in the catalogue of the February 28, 2014 Shizuishan M_L4.4 earthquake swarm. A total of 34 earthquakes were detected, which is nearly 3 times as much as the number(13)of earthquakes from Ningxia seismic network. The number of earthquake swarm sequence is greatly increased. Then, it provides the possibility for the fine study of the earthquake swarm activity and seismogenic fault. The best double couple solution of the main shock obtained by the cut and paste method is strike 354°, dip 70° and slip 166° for nodal plane I, and strike 89°, dip 77° and slip 21°for nodal plane Ⅱ. The main shock is a dextral strike-slip earthquake with a small amount of thrust component. And, the depth of the main shock is 7~8km, which is a shallow earthquake, derived from the results of the double difference relocation and the best fitting depth of focal mechanism. Together with the results of deep 3-D seismic tomography of the Yinchuan Basin, our results show that the main shock and the largest aftershock more likely occurred in the upper crust, and the rest of earthquakes mainly occurred at the bottom of sedimentary layer or on the top of the upper crust crystallization basement. We find some interesting phenomena on the pattern of time-space evolution of the earthquake swarm. The distribution of earthquake swarm is in the near north-south direction. Aftershocks are mainly concentrated in the north region of the main shock, which show an obvious trend of extending gradually from the south to the north. Also, the result shows the general trend of shallower focal depth with the development of aftershocks to the north. The results of distribution and depth profile of the earthquake swarm and the focal mechanism of the main shock all show that the sequence probably occurred in the fault at the east foot of Helan Mountain with an eastward dip and a larger dip angle. Surface projection image of the earthquake sequence shows that the epicenter distribution extends northward from the northern end of the fault. This may suggest that the deep part of the fault is likely to extend northward.     

2013年8月香格里拉德钦—得荣M_S5.9地震序列震源机制与应力场特征

利用中国区域台网地震波形记录,采用CAP方法反演了香格里拉德钦(位于云南省)—得荣(属于四川省)2013年8月28日MS5.1、8月31日MS5.9地震及8次MS4余震的震源双力偶断层面解和震源质心深度.结合震区地质构造、余震分布、烈度分布、动力学背景等资料,分析了此次地震序列的震源机制和应力场特征.反演结果表明,此次地震序列为节面倾角倾斜的正断层型地震,发震断层为NWW向活动构造带.序列中最大地震MS5.9和次大地震MS5.1地震的破裂节面分别为走向299°、倾角53°、滑动角-73°;走向290°、倾角55°、滑动角-72°.震源区受到强烈的水平拉张力、垂直挤压力作用.MS5.9地震后续余震T、P轴方位角随时间变化强烈,表明MS5.9地震后震源区应力调整作用明显.震源区应力场反演结果显示,地震发生的构造带上最大主拉应力为NNE-SSW向,最大主压应力为NW-SE向,与GPS观测所反映的地表最大主应力分布方向基本一致,表明震源区的应力状态可能主要受到背景大尺度构造应力场的控制.此次地震序列填充了川滇地区震源机制及应力场的空间分布图像,1976年以来可靠的震源机制解资料表明香格里拉次级块体是川滇块体及周边区域显著的拉张作用区域.香格里拉次级块体和保山次级块体正断层地震的断层节面及震源应力轴分布的空间变化,与GPS观测反映的地表最大主拉应力分布较一致,其空间分布特征反映了在青藏高原物质挤出背景下,块体之间相互作用、地势差异等作用对构造活动的影响.     

THE SOURCE PARAMETERS AND SEISMOTECTONIC IMPLICATIONS OF THE SEPTEMBER 4, 2017 ML4.4 LINCHENG EARTHQUAKE

At 3:05, September 4, 2017, an M_L4.4 earthquake occurred in Lincheng County, Xingtai City, Hebei Province, which was felt obviously by surrounding areas. Approximately 60km away from the hypocenter of Xingtai M_S7.2 earthquake in 1966, this event is the most noticeable earthquake in this area in recent years. On the one hand, people are still shocked by the 1966 Xingtai earthquake that caused huge disaster, on the other hand, Lincheng County is lack of strong earthquakes. Therefore, this quake has aroused widespread concerns by the government, society and seismologists. It is necessary to clarify whether the seismogenic structure of this event is consistent with the previous seismicity and whether it has any new implications for the seismic activity and seismic hazard in this region. Therefore, it is of great significance to study its seismogenic mechanism for understanding the earthquake activity in Xingtai region where a M_S7.2 earthquake had occurred in 1966. In this study, the Lincheng earthquake and its aftershocks are relocated using the multi-step locating method, and the focal mechanism and focal depth are determined by the "generalized Cut and Paste"(gCAP)method. The reliability of the results is analyzed based on the data of Hebei regional seismic network. In order to better constrain the focal depth, the depth phase sPL fitting method is applied to the relocation of focal depth. The inversion and constraint results show that aftershocks are mainly distributed along NE direction and dip to SE direction as revealed by depth profiles. Focal depths of aftershocks are concentrated in the depths of 6.5~8.2km with an average of about 7km. The best double-couple solution of the mainshock is 276°, 69° and -40° for strike, dip and slip angle for nodal plane I and 23°, 53° and -153° for nodal plane Ⅱ, respectively, revealing that it is a strike-slip event with a small amount of normal-fault component. The initial rupture depth of mainshock is about 7.5km obtained by the relocation while the centroid depth is 6km derived from gCAP method which was also verified by the seismic depth phase sPL observed by several stations, indicating the earthquake is ruptured from deep to shallow. Combined with the research results on regional geological structure and the seismic sequence relocation results, it is concluded that the nodal plane Ⅱ is the seismogenic fault plane of this earthquake. There are several active faults around the hypocenter of Lincheng earthquake sequence, however, none of the known faults on the current understanding is completely consistent with the seismogenic fault. To determine the seismogenic mechanism, the lucubrated research of the M_S7.2 Xingtai earthquake in 1966 could provide a powerful reference. The seismic tectonic characteristics of the 1966 Xingtai earthquake sequence could be summarized as follows:There are tensional fault in the shallow crust and steep dip hidden fault in the middle and lower crust, however, the two faults are not connected but separated by the shear slip surfaces which are widely distributed in the middle crust; the seismic source is located between the hidden fault in the lower crust and the extensional fault in the upper crust; the earthquake began to rupture in the deep dip fault in the mid-lower crust and then ruptured upward to the extensional fault in the shallow crust, and the two fault systems were broken successively. From the earthquake rupture revealed by the seismic sequence location, the Lincheng earthquake also has the semblable feature of rupturing from deep to shallow. However, due to the much smaller magnitude of this event than that of the 1966 earthquake, the accumulated stress was not high enough to tear the fracture of the detachment surface whose existence in Lincheng region was confirmed clearly by the results of Lincheng-Julu deep reflection seismology and reach to the shallower fault. Therefore, by the revelation of the seismogenic mechanism of the 1966 Xingtai earthquake, the seismogenic fault of Lincheng earthquake is presumed to be a concealed fault possessing a potential of both strike-slip and small normal faulting component and located below the detachment surface in Lincheng area. The tectonic significance indicated by this earthquake is that the event was a stress adjustment of the deep fault and did not lead to the rupture of the shallow fault. Therefore, this area still has potential seismic hazard to a certain extent.     

2020年6月9日中卫ML3.4地震的震源机制及其中心解的测定

2020年6月9日宁夏中卫市沙坡头区发生M_L3.4地震,该地震发生在1709年中卫南7?级地震的极震区内,且震中位于以往弱震相对偏少的地区。本文利用宁夏区域地震台网的波形记录,采用gCAP方法反演了2020年6月9日中卫M_L3.4地震的震源机制解及震源矩心深度,并用Hash方法计算其震源机制解,且得出了两种方法的震源机制中心解。结果表明,gCAP方法的震源机制解为:节面I走向255°,倾角79°,滑动角?20°;节面II走向348°,倾角70°,滑动角?168°,震源矩心深度为12 km。而Hash方法的震源机制解为:节面I走向344°,倾角89°,滑动角176°;节面II走向74°,倾角86°,滑动角1°。两种方法的震源机制中心解为:节面I走向255°,倾角87°,滑动角?11°;节面II走向346°,倾角80°,滑动角?176°,主压应力轴走向主要为NE向,其中gCAP方法结果与震源机制中心解的最小空间旋转角相对最小,为12.09°。结合过去地质构造资料,推测2020年6月9日中卫M_L3.4地震的主要错动方式为左旋走滑,且断层面为NEE向节面的可能性较大。      

2018年5月松原MS5.7地震序列发震断层及应力场特征

利用双差定位方法对2018年松原M_S5.7地震序列中M_L≥1.0地震重新定位,之后使用CAP方法求解松原M_S5.7地震序列中强地震的震源机制解,再借助MSATSI软件包反演得到松原地区的区域应力场。综合分析以上研究结果得到如下结论:① 松原M_S5.7地震序列发生在NW走向的第二松花江断裂与NE走向的扶余—肇东断裂交会处,将地震精定位结果沿两条断层走向作剖面分析,NW向剖面主轴长度约为5 km,震中分布均匀,NE向剖面主轴长度亦约为5 km,震中呈倾向NE的高倾角分布;② 该序列中的4次M_L≥3.7地震的震源机制解具有良好的一致性:节面Ⅰ走向为NE向,节面Ⅱ走向为NW向,均为高倾角走滑断层。中强地震的震源机制节面解与第二松花江断裂性质基本一致,由此推断第二松花江断裂是本次松原地震的发震断层;③ 松原地区的主压应力方位角为N86°E,倾角为7°,主张应力方位角为N24°E,倾角为71°。松原地区的区域应力场既受到大尺度的板块构造运动的控制,又受到区域构造运动的影响。在太平洋板块对北东亚板块向西俯冲作用下,东北地区产生了近EW向的主压应力,受周边地质构造控制,松辽盆地内NE向断裂与NW向断裂交会处易发生走滑型地震,2018年松原M_S5.7地震正是在这种构造作用控制下发生的中强地震。      

2013年山东莱州M4.6地震序列发震构造初探

采用双差定位法对山东莱州地震序列重新定位,通过CAP方法反演M4.6地震震源机制,在此基础上初步探讨莱州地震序列发震构造。结果显示:精确定位震中位置主要位于柞村—仙夼断裂的NW方向,深度剖面显示从SE方向到NW方向断层深度呈由浅逐渐变深的趋势,这均与柞村—仙夼断裂位置、走向、倾向特征较为吻合;M4.6地震震源机制解的节面Ⅰ与柞村—仙夼断裂走向、倾角较为接近。综合精确定位震中位置、剖面深度分布特征、M4.6地震震源机制解及宏观调查烈度分布等结果与柞村-仙夼断裂产状之间的关系,初步推测柞村—仙夼断裂可能为莱州地震序列的发震断层。