A review of crust and upper mantle structure studies of the Snake River Plain-Yellowstone volcanic system: A major lithospheric anomaly in the western U.S.A.

The Snake River Plain-Yellowstone volcanic system is one of the largest, basaltic, volcanic field in the world. Here, there is clear evidence for northeasterly progression of rhyolitic volcanism with its present position in Yellowstone. Many theories have been advanced for the origin of the Snake River Plain-Yellowstone system. Yellowstone and Eastern Snake River Plain have been studied intensively using various geophysical techniques. Some sparse geophysical data are available for the Western Snake River Plain as well. Teleseismic data show the presence of a large anomalous body with low P- and S-wave velocities in the crust and upper mantle under the Yellowstone caldera. A similar body in which compressional wave velocity is lower than in the surrounding rock is present under the Eastern Snake River Plain. No data on upper mantle anomalies are available for the Western Snake River Plain. Detailed seismic refraction data for the Eastern Snake River Plain show strong lateral heterogeneities and suggest thinning of the granitic crust from below by mafic intrusion. Available data for the Western Snake River Plain also show similar thinning of the upper crust and its replacement by mafic material. The seismic refraction results in Yellowstone show no evidence of the low-velocity anomalies in the lower crust suggested by teleseismic P-delay data and interpreted as due to extensive partial melting. However, the seismic refraction models indicate lower-than-normal velocities and strong lateral inhomogeneities in the upper crust. Particularly obvious in the refraction data are two regions of very low seismic velocities near the Mallard Eake and Sour Creek resurgent domes in the Yellowstone caldera. The low-velocity body near the Sour Creek resurgent dome is intepreted as partially molten rock. Together with other geophysical and thermal data, the seismic results indicate that a sub-lithospheric thermal anomaly is responsible for the time-progressive volcanism along the Eastern Snake River Plain. However, the exact mechanism responsible for the volcanism and details of magma storage and migration are not yet fully understood.     

Initiation of large-volume silicic centers in the Yellowstone hotspot track: insights from H<Subscript>2</Subscript>O- and F-rich quartz-hosted rhyolitic melt inclusions in the Arbon Valley Tuff of the Snake River Plain

During the onset of caldera cluster volcanism at a new location in the Snake River Plain (SRP), there is an increase in basalt fluxing into the crust and diverse silicic volcanic products are generated. The SRP contains abundant and compositionally diverse hot, dry, and often low-δ¹⁸O silicic volcanic rocks produced through time during the formation of individual caldera clusters, but more H₂O-rich eruptive products are rare. We report analyses of quartz-hosted melt inclusions from pumice clasts from the upper and lower Arbon Valley Tuff (AVT) to gain insight into the initiation of caldera cluster volcanism. The AVT, a voluminous, caldera-forming rhyolite, represents the commencement of volcanism (10.44 Ma) at the Picabo volcanic field of the Yellowstone hotspot track. This is a normal δ¹⁸O rhyolite consisting of early and late erupted members (lower and upper AVT, respectively) with extremely radiogenic Sr isotopes and unradiogenic Nd isotopes, requiring that ~50 % of the mass of these elements is derived from melts of Archean upper crust. Our data reveal distinctive features of the early erupted lower AVT melt including: variable F concentrations up to 1.4 wt%, homogenous and low Cl concentrations (~0.08 wt%), H₂O contents ranging from 2.3 to 6.4 wt%, CO₂ contents ranging from 79 to 410 ppm, and enrichment of incompatible elements compared to the late erupted AVT, subsequent Picabo rhyolites, SRP rhyolites, and melt inclusions from other metaluminous rhyolites (e.g., Bishop Tuff, Mesa Falls Tuff). We couple melt inclusion data with Ti measurements and cathodoluminescence (CL) imaging of the host quartz phenocrysts to elucidate the petrogenetic evolution of the AVT rhyolitic magma. We observe complex and multistage CL zoning patterns, the most critical being multiple truncations indicative of several dissolution–reprecipitation episodes with bright CL cores (higher Ti) and occasional bright CL rims (higher Ti). We interpret the high H₂O, F, F/Cl, and incompatible trace element concentrations in the context of a model involving melting of Archean crust and mixing of the crustal melt with basaltic differentiates, followed by multiple stages of fractional crystallization, remelting, and melt extraction. This multistage process, which we refer to as distillation, is further supported by the complex CL zoning patterns in quartz. We interpret new Δ¹⁸O(Qz-Mt) isotope measurements, demonstrating a 0.4 ‰ or ~180 °C temperature difference, and strong Sr isotopic and chemical differences between the upper and lower AVT to represent two separate eruptions. Similarities between the AVT and the first caldera-forming eruptions of other caldera clusters in the SRP (Yellowstone, Heise and Bruneau Jarbidge) suggest that the more evolved, lower-temperature, more H₂O-rich rhyolites of the SRP are important in the initiation of a caldera cluster during the onset of plume impingement.     

Integrated “plume winter” scenario for the double-phased extinction during the Paleozoic–Mesozoic transition: The G-LB and P-TB events from a Panthalassan perspective

The event across the Paleozoic–Mesozoic transition involved the greatest mass extinction in history together with other unique geologic phenomena of global context, such as the onset of Pangean rifting and the development of superanoxia. The detailed stratigraphic analyses on the Permo-Triassic sedimentary rocks documented a two-stepped nature both of the extinction and relevant global environmental changes at the Guadalupian–Lopingian (Middle and Upper Permian) boundary (G-LB, ca. 260 Ma) and at the Permo-Triassic boundary (P-TB, ca. 252 Ma), suggesting two independent triggers for the global catastrophe. Despite the entire loss of the Permian–Triassic ocean floors by successive subduction, some fragments of mid-oceanic rocks were accreted to and preserved along active continental margins. These provide particularly important dataset for deciphering the Permo-Triassic paleo-environments of the extensive superocean Panthalassa that occupied nearly two thirds of the Earth’s surface. The accreted deep-sea pelagic cherts recorded the double-phased remarkable faunal reorganization in radiolarians (major marine plankton in the Paleozoic) both across the G-LB and the P-TB, and the prolonged deep-sea anoxia (superanoxia) from the Late Permian to early Middle Triassic with a peak around the P-TB. In contrast, the accreted mid-oceanic paleo-atoll carbonates deposited on seamounts recorded clear double-phased changes of fusuline (representative Late Paleozoic shallow marine benthos) diversity and of negative shift of stable carbon isotope ratio at the G-LB and the P-TB, in addition to the Paleozoic minimum in ⁸⁷Sr/⁸⁶Sr isotope ratio in the Capitanian (Late Guadalupian) and the paleomagnetic Illawarra Reversal in the late Guadalupian. These bio-, chemo-, and magneto-stratigraphical signatures are concordant with those reported from the coeval shallow marine shelf sequences around Pangea. The mid-oceanic, deep- and shallow-water Permian records indicate that significant changes have appeared twice in the second half of the Permian in a global extent. It is emphasized here that everything geologically unusual started in the Late Guadalupian; i.e., (1) the first mass extinction, (2) onset of the superanoxia, (3) sea-level drop down to the Phanerozoic minimum, (4) onset of volatile fluctuation in carbon isotope ratio, 5) ⁸⁷Sr/⁸⁶Sr ratio of the Paleozoic minimum, (6) extensive felsic alkaline volcanism, and (7) Illawarra Reversal.The felsic alkaline volcanism and the concurrent formation of several large igneous provinces (LIPs) in the eastern Pangea suggest that the Permian biosphere was involved in severe volcanic hazards twice at the G-LB and the P-TB. This episodic magmatism was likely related to the activity of a mantle superplume that initially rifted Pangea. The supercontinent-dividing superplume branched into several secondary plumes in the mantle transition zone (410–660 km deep) beneath Pangea. These secondary plumes induced the decompressional melting of mantle peridotite and pre-existing Pangean crust to form several LIPs that likely caused a “plume winter” with global cooling by dust/aerosol screens in the stratosphere, gas poisoning, acid rain damage to surface vegetation etc. After the main eruption of plume-derived flood basalt, global warming (plume summer) took over cooling, delayed the recovery of biodiversity, and intensified the ocean stratification. It was repeated twice at the G-LB and P-TB.A unique geomagnetic episode called the Illawarra Reversal around the Wordian–Capitanian boundary (ca. 265 Ma) recorded the appearance of a large instability in the geomagnetic dipole in the Earth’s outer core. This rapid change was triggered likely by the episodic fall-down of a cold megalith (subducted oceanic slabs) from the upper mantle to the D″ layer above the 2900 km-deep core-mantle boundary, in tight association with the launching of a mantle superplume. The initial changes in the surface environment in the Capitanian, i.e., the Kamura cooling event and the first biodiversity decline, were probably led by the weakened geomagnetic intensity due to unstable dipole of geodynamo. Under the low geomagnetic intensity, the flux of galactic cosmic radiation increased to cause extensive cloud coverage over the planet. The resultant high albedo likely drove the Kamura cooling event that also triggered the unusually high productivity in the superocean and also the expansion of O₂ minimum zone to start the superanoxia.The “plume winter” scenario is integrated here to explain the “triple-double” during the Paleozoic–Mesozoic transition interval, i.e., double-phased cause, process, and consequence of the greatest global catastrophe in the Phanerozoic, in terms of mantle superplume activity that involved the whole Earth from the core to the surface biosphere.     

Speculations on the nature and cause of mantle heterogeneity

Hotspots and hotspot tracks are on, or start on, preexisting lithospheric features such as fracture zones, transform faults, continental sutures, ridges and former plate boundaries. Volcanism is often associated with these features and with regions of lithospheric extension, thinning, and preexisting thin spots. The lithosphere clearly controls the location of volcanism. The nature of the volcanism and the presence of ‘melting anomalies’ or ‘hotspots’, however, reflect the intrinsic chemical and lithologic heterogeneity of the upper mantle. Melting anomalies—shallow regions of ridges, volcanic chains, flood basalts, radial dike swarms—and continental breakup are frequently attributed to the impingement of deep mantle thermal plumes on the base of the lithosphere. The heat required for volcanism in the plume hypothesis is from the core. Alternatively, mantle fertility and melting point, ponding and focusing, and edge effects, i.e., plate tectonic and near-surface phenomena, may control the volumes and rates of magmatism. The heat required is from the mantle, mainly from internal heating and conduction into recycled fragments. The magnitude of magmatism appears to reflect the fertility, not the absolute temperature, of the asthenosphere. I attribute the chemical heterogeneity of the upper mantle to subduction of young plates, aseismic ridges and seamount chains, and to delamination of the lower continental crust. These heterogeneities eventually warm up past the melting point of eclogite and become buoyant low-velocity diapirs that undergo further adiabatic decompression melting as they encounter thin or spreading regions of the lithosphere. The heat required for the melting of cold subducted and delaminated material is extracted from the essentially infinite heat reservoir of the mantle, not the core. Melting in the upper mantle does not requires the instability of a deep thermal boundary layer or high absolute temperatures. Melts from recycled oceanic crust, and seamounts—and possibly even plateaus—pond beneath the lithosphere, particularly beneath basins and suture zones, with locally thin, weak or young lithosphere. The characteristic scale lengths—150 to 600 km—of variations in bathymetry and magma chemistry, and the variable productivity of volcanic chains, may reflect compositional heterogeneity of the asthenosphere, not the scales of mantle convection or the spacing of hot plumes. High-frequency seismic waves, scattering, coda studies and deep reflection profiles are needed to detect the kind of chemical heterogeneity and small-scale layering predicted from the recycling hypothesis.     

青藏高原的地幔结构:地幔羽、地幔剪切带及岩石圈俯冲板片的拆沉

通过横穿青藏高原近 80 0 0km长的 4条天然地震层析剖面 ,获得 4 0 0km深度以上的地壳和地幔速度图像及地震波各向异性 ,揭示了青藏高原 4 0 0km深度范围内的地壳和地幔结构特征。地幔速度图像显示 ,青藏高原腹地的深地幔中存在以大型低速异常体为特征的地幔羽 ,其可能通过热通道与大面积分布的可可西里新生代高钾碱性火山作用有成因联系 ;阿尔金、康西瓦、金沙江、嘉黎及雅鲁藏布江等走滑断裂可下延至 30 0～ 4 0 0km深度 ,显示了低速高热物质组成的垂向低速异常带特征及大型超岩石圈或地幔剪切带的产出 ;发现康西瓦、东昆仑—金沙江、班公湖—怒江和雅鲁藏布缝合带下部存在不连续的高速异常带 ,可以解释为青藏高原地体拼合及碰撞过程中可能保留的加里东、古特提斯和中特提斯大洋岩石圈“化石”残片 ,是“拆沉”的地球物理证据。印度大陆岩石圈的巨厚俯冲板片以 15～ 2 0°倾角向北插入唐古拉山下 30 0km深处 ,并被高热物质组成的地幔剪切带分开。结合新的横穿喜马拉雅及青藏高原的地幔层析资料 ,提出青藏高原碰撞动力学新模式 :青藏高原南部印度岩石圈板片的翻卷式陆内超深俯冲 ,北缘克拉通向南的陆内俯冲 ,腹地深部的地幔羽上涌 ,以及地幔范围内的高原“右旋隆升”及物质向东及北东方向运动及挤出。     

Teleseismic imaging of the mantle beneath southernmost China: New insights into the Hainan plume

Intraplate volcanism during the Late Cenozoic in the Leiqiong area of southernmost China, with basaltic lava flows covering a total of more than 7000 km², has been attributed to an underlying Hainan plume. To clarify detailed features of the Hainan plume, such as the morphology of its magmatic conduits, the depth of its magmatic pool in the upper mantle and the pattern of mantle upwelling, we determined tomographic images of the mantle down to a depth of 1100 km beneath southern China using 18,503 high-quality arrival-time data of 392 distant earthquakes recorded by a dense seismic array. Our results show a mushroom-like continuous low-velocity anomaly characterized by a columnar tail with a diameter of 200–300 km extending down to the lower mantle beneath north of the Hainan hotspot and a head spreading laterally in and around the mantle transition zone, indicating a magmatic pool in the upper mantle. Further upward, the plume head is decomposed into smaller patches, and when reaching the base of the lithosphere, a pancake-like anomaly has formed to feed the Hainan hotspot. This result challenges the classical model of a fixed thermal plume that rises vertically to the surface. Hence we propose a new layering-style model for the magmatic upwelling of the Hainan plume. Our results indicate spatial complexities and variations of mantle plumes probably due to heterogeneous compositions and thermochemical structures of the deep mantle.     

Intra- and extra-caldera volcaniclastic facies and geomorphic characteristics of a frequently active mafic island–arc volcano, Ambrym Island, Vanuatu

Ambrym is one of the most voluminous active volcanoes in the Melanesian arc. It consists of a 35 by 50 km island elongated east–west, parallel with an active fissure zone. The central part of Ambrym, about 800 m above sea level, contains a 12 kilometre-wide caldera, with two active intra-caldera cone-complexes, Marum and Benbow. These frequently erupting complexes provide large volumes of tephra (lapilli and ash) to fill the surrounding caldera and create an exceptionally large devegetated plateau “ash plain”, as well as sediment-choked fluvial systems leading outward from the summit caldera. Deposits from fall, subordinate base surge and small-volume pyroclastic (scoria) flows dominate the volcaniclastic sequences in near vent regions. Frequent and high-intensity rainfall results in rapid erosion of freshly deposited tephra, forming small-scale debris flow- and modified grain flow-dominated deposits. Box-shaped channel systems are initially deep and narrow on the upper flanks of the composite cones and are filled bank-to-bank with lapilli-dominated debris flow deposits. These units spill out into larger channel systems forming debris aprons of thousands of overlapping and anastomosing long, narrow lobes of poorly sorted lapilli-dominated deposits. These deposits are typically remobilised by hyperconcentrated flows, debris-rich stream flows and rare debris flows that pass down increasingly shallower and broader box-shaped valleys. Lenses and lags of fines and primary fall deposits occur interbedded between the dominantly tabular hyperconcentrated flow deposits of these reaches. Aeolian sedimentation forms elongated sand dunes flanking the western rim of the ash-plain. Outside the caldera, initially steep-sided immature box-canyons are formed again, conveying dominantly hyperconcentrated flow deposits. These gradually pass into broad channels on lesser gradients in coastal areas and terminate at the coast in the form of prograding fans of ash-dominated deposits. The extra-caldera deposits are typically better sorted and contain other bedding features characteristic of more dilute fluvial flows and transitional hyperconcentrated flows. These outer flank volcaniclastics fill valleys to modify restricted portions of the dominantly constructional landscape (lava flows, and satellite cones) of Ambrym. Apparent maturity of the volcanic system has resulted in the subsidence of the present summit caldera at a similar rate to its infill by volcaniclastic deposits.     

Seismic evidence for a mantle plume beneath the Cape Verde hotspot

P- and S-wave tomography of the upper mantle beneath the Cape Verde hotspot is determined using arrival-time data measured precisely from three-component seismograms of 106 distant earthquakes recorded by a local seismic network. Our results show a prominent low-velocity anomaly imaged as a continuous column <100 km wide from the uppermost mantle down to about 500 km beneath Cape Verde, especially below the Fogo active volcano, which erupted in 1995. The low-velocity anomaly may reflect a hot mantle plume feeding the Cape Verde hotspot.     

Alkaline hybrid mafic magmas of the Yampa area,NW Colorado,and their relationship to the Yellowstone mantle plume and lithospheric mantle domains

The Yampa volcanic field (late Miocene) consists of about 70 outcrops of monogenetic cinder cones, lavas, dykes, volcanic necks and hydrovolcanic pyroclastic deposits and is situated in the most northerly part of the Rio Grande rift. Contemporaneous extension in this part of the rift was small, but there is geological and geophysical evidence that, by the late Miocene, the area was underlain by hot asthenosphere convected by the Yellowstone mantle plume. The Yampa rocks are mafic and chemically diverse, including basanites, alkali basalts, potassic trachybasalts, hawaiites and shoshonites. About half the rocks bear the xenocryst suite feldspar, pyroxene, Fe–Ti oxide, amphibole, biotite. There is a tendency for xenocryst-free rocks to be the most mafic, interpreted to indicate that the xenocrysts are cognate, and represent cumulate material from fractional crystallization of the magmas in deep crustal magma chambers. The elemental and isotopic (Nd and Sr) variations can be modelled by mixing variable proportions of partial melts of local lithospheric mantle with an OIB end-member formed by partial melting of asthenosphere. The OIB end-member appears to have the elemental and isotopic composition of typical Northern Hemisphere OIB, in particular the plume-derived basanites of Loihi seamount, Hawaii. The OIB end-member at Yampa is interpreted to have been derived from mantle convected in the Yellowstone mantle plume.     

Contemporaneous Trachyandesitic and Calc-alkaline Volcanism of the Huerto Andesite, San Juan Volcanic Field, Colorado, USA

Locally, voluminous andesitic volcanism both preceded and followedlarge eruptions of silicic ash-flow tuff from many calderasin the San Juan volcanic field. The most voluminous post-collapselava suite of the central San Juan caldera cluster is the 28Ma Huerto Andesite, a diverse assemblage erupted from at least5–6 volcanic centres that were active around the southernmargins of the La Garita caldera shortly after eruption of theFish Canyon Tuff. These andesitic centres are inferred, in part,to represent eruptions of magma that ponded and differentiatedwithin the crust below the La Garita caldera, thereby providingthe thermal energy necessary for rejuvenation and remobilizationof the Fish Canyon magma body. The multiple Huerto eruptivecentres produced two magmatic series that differ in phenocrystmineralogy (hydrous vs anhydrous assemblages), whole-rock majorand trace element chemistry and isotopic compositions. Hornblende-bearinglavas from three volcanic centres located close to the southeasternmargin of the La Garita caldera (Eagle Mountain–FourmileCreek, West Fork of the San Juan River, Table Mountain) definea high-K calc-alkaline series (57–65 wt % SiO₂) that isoxidized, hydrous and sulphur rich. Trachyandesitic lavas fromwidely separated centres at Baldy Mountain–Red Lake (westernmargin), Sugarloaf Mountain (southern margin) and Ribbon Mesa(20 km east of the La Garita caldera) are mutually indistinguishable(55–61 wt % SiO₂); they are characterized by higher andmore variable concentrations of alkalis and many incompatibletrace elements (e.g. Zr, Nb, heavy rare earth elements), andthey contain anhydrous phenocryst assemblages (including olivine).These mildly alkaline magmas were less water rich and oxidizedthan the hornblende-bearing calc-alkaline suite. The same distinctionscharacterize the voluminous precaldera andesitic lavas of theConejos Formation, indicating that these contrasting suitesare long-term manifestations of San Juan volcanism. The favouredmodel for their origin involves contrasting ascent paths anddifferentiation histories through crustal columns with differentthermal and density gradients. Magmas ascending into the mainfocus of the La Garita caldera were impeded, and they evolvedat greater depths, retaining more of their primary volatileload. This model is supported by systematic differences in isotopiccompositions suggestive of crust–magma interactions withcontrasting lithologies. KEY WORDS: alkaline; calc-alkaline; petrogenesis; episodic magmatism; Fish Canyon system     

Reconstructing the ancestral Yellowstone plume from accreted seamounts and its relationship to flat-slab subduction

Recent geodynamic analyses have emphasized the relationship between modern flat-slab subduction zones and the overriding of buoyant oceanic crust. Although most models for the evolution of the Late Mesozoic–Cenozoic Laramide orogeny in the southwestern United States involve flat-slab subduction, the mechanisms proposed are controversial. An examination of the geological evolution of the 60–50-Ma Crescent terrane of the Coast Ranges indicates that it was formed in a shallowing-upward Loihi-type oceanic setting culminating in the eruption of subaerial lavas. Plate reconstructions indicate that the Crescent terrane was emplaced into ca. 20-Ma crust, and the presence of subaerial lavas implies an uplift due to the plume of ca. 4.2 km, which we use to calculate a minimum buoyancy flux of 1.1 Mg s⁻¹, similar to that of the modern Yellowstone plume.Published paleomagnetic data indicate that the Crescent terrane was formed at a paleolatitude similar to that of the Yellowstone plume. The Crescent seamount was accreted within 5 My of the cessation of plume magmatism. Plate reconstructions indicate that it would have originated about 750 km to the west of the North American plate margin if it developed above a fixed Yellowstone plume, and are therefore consistent with the recorded very short interval between its formation and tectonic emplacement.We interpret the Crescent terrane as due to the ancestral Yellowstone plume. Such a plume would have generated an elongate swell and related plateau that would have been overridden by the North American margin. Taken together, the relationship between flat-slab and overriding of oceanic plateau in Laramide times would have been analogous to the relationship between modern Andean flat-slab subduction zones and the Juan Fernandez and Nazca oceanic plateaus.     

Late Pliocene–recent tectonic setting for the Tianchi volcanic zone, Changbai Mountains, northeast China

Mafic volcanic rocks have erupted in the Tianchi volcanic zone, Changbai Mountains, northeast China, since late Pliocene time. The zone formed in an extensional environment during early-middle Cenozoic time, and in a compressional environment during late Cenozoic. Crustal thickness (about 40 km) in the Changbai Mountains is larger than the regional average of 34–36 km to the northwest and southeast. The conduit for magma upwelling was not coincident with the NE-striking regional faults, but seem to be confined to a deep-seated NW–WNW-striking fault zone. Since the late Pliocene, the Tianchi volcanic zone was subjected to crustal uplift within an intracontinental, weakly compressional environment (with minor WNW–ESE shearing) related to the westward subduction of the West Pacific plate. The nature of this volcanism is not typical of active, subduction-related continental margin volcanism. The magmatic evolutionary process evolved from trachybasalt through basaltic trachyandesite, trachyte, and pantellerite.     

Variations in andean andesite compositions and their petrogenetic significance

Three linear zones of active andesite volcanism are present in the Andes — a northern zone (5°N–2°S) in Colombia and Ecuador, a central zone (16°S–28°S) largely in south Peru and north Chile and a southern zone (33°S–52°S) largely in south Chile. The northern zone is characterized by basaltic andesites, the central zone by andesite—dacite lavas and ignimbrites and the southern zone by high-alumina basalts, basaltic andesites and andesites. Shoshonites and volcanic rocks of the alkali basalt—trachyte association occur at scattered localities east of the active volcanic chain,The northern and central volcanic zones are 140 km above an eastward-dipping Benioff zone, while the southern zone lies only 90 km above a Benioff zone. Continental crust is ca. 70 km in thickness below the central zone, but is 30–45 km thick below northern and southern volcanic zones. The correlation between volcanic products and their structural setting is supported by trace element and isotope data. The central zone andesite lavas have higher Si, K, Rb, Sr and Ba, and higher initial Sr isotope ratios than the northern or southern zone lavas. The southern zone high-alumina basalts have lower Ce/Yb ratios than volcanics from the other zones. In addition, the central zone andesite lavas show a well-defined eastward increase in K, Rb and Ba and a decrease in Sr.Andean andesite magmas are a result of a complex interplay of partial melting, fractional crystallization and “contamination” processes at mantle depths, and contamination and fractional crystallization in the crust. Variations in andesite composition across the central Andean chain reflect a diminishing degree of partial melting or an increase in fractional crystallization or an increase in “contamination” passing eastwards. Variations along the Andean chain indicate a significant crustal contribution for andesites in the central zone, and indicate that the high-alumina basalts and basaltic andesites of the southern zone are from a shallower mantle source region than other volcanic rocks. The dacite-rhyolite ignimbrites of the central zone share a common source with the andesites and might result from fractional crystallization of andesite magma during uprise through thick continental crust. The occurrence of shoshonites and alkali basalts eat of the active volcanic chain is attributed to partial melting of mantle peridotite distant from the subduction zone.     

Complex slab structure and arc magmatism beneath the Japanese Islands

A dense nationwide seismic network recently constructed in Japan has resulted in the production of a large amount of high-quality data that have enabled the high-resolution imaging of deep seismic structures in the Japanese subduction zone. Seismic tomography, precise locations of earthquakes, and focal mechanism research have allowed the identification of the complex structure of subducting slabs beneath Japan, revealing that the subducting Philippine Sea slab underneath southwestern Japan has an undulatory configuration down to a depth of 60–200 km, and is continuous from Kanto to Kyushu without disruption or splitting, even within areas north of the Izu Peninsula. Analysis of the geometry of the Pacific and Philippine Sea slabs identified a broad contact zone beneath the Kanto Plain that causes anomalously deep interplate and intraslab earthquake activity. Seismic tomographic inversions using both teleseismic and local events provide a clear image of the deep aseismic portion of the Philippine Sea slab beneath the Japan Sea north of Chugoku and Kyushu, and beneath the East China Sea west of Kyushu down to a depth of ∼450 km. Seismic tomography also allowed the identification of an inclined sheet-like seismic low-velocity zone in the mantle wedge beneath Tohoku. A recent seismic tomography work further revealed clear images of similar inclined low-velocity zones in the mantle wedge for almost all other areas of Japan. The presence of the inclined low-velocity zones in the mantle wedge across the entirety of Japan suggests that it is a common feature to all subduction zones. These low-velocity zones may correspond to the upwelling flow portion of subduction-induced convection systems. These upwelling flows reach the Moho directly beneath active volcanic areas, suggesting a link between volcanism and upwelling.     

Magnetotelluric images of the crustal structure of Chyulu Hills volcanic field, Kenya

Electromagnetic experiments were conducted in 1995 as part of a multidisciplinary research project to investigate the deep structure of the Chyulu Hills volcanic chain on the eastern flank of the Kenya Rift in East Africa. Transient electromagnetic (TEM) and broadband (120–0.0001 Hz) magnetotelluric (MT) soundings were made at eight stations along a seismic survey line and the data were processed using standard techniques. The TEM data provided effective correction for static shifts in MT data. The MT data were inverted for the structure in the upper 20 km of the crust using a 2-D inversion scheme and a variety of starting models. The resulting 2-D models show interesting features but the wide spacing between the MT stations limited model resolution to a large extent. These models suggest that there are significant differences in the physical state of the crust between the northern and southern parts of the Chyulu Hills volcanic field. North of the Chyulu Hills, the resistivity structure consists of a 10–12-km-thick resistive (up to 4000 Ω m) upper crustal layer, ca. 10-km-thick mid-crustal layer of moderate resistivity (50 Ω m), and a conductive substratum. The resistive upper crustal unit is considerably thinner over the main ridge (where it is ca. 2 km thick) and further south (where it may be up to 5 km thick). Below this cover unit, steep zones of low resistivity (0.01–10 Ω m) occur underneath the main ridge and at its NW and SE margins (near survey positions 100 and 150–210 km on seismic line F of Novak et al. [Novak, O., Prodehl, C., Jacob, A.W.B., Okoth, W., 1997. Crustal structure of the southern flank of the Kenya Rift deduced from wide-angle P-wave data. In: Fuchs, K., Altherr, R., Muller, B., Prodehl, C. (Eds.), Structure and Dynamic Processes in the Lithosphere of the Afro-Arabian Rift System. Tectonophysics, vol. 278, 171–186]). These conductors appear to be best developed in upper crustal (1–8 km) and middle crustal (9–18 km) zones in the areas affected by volcanism. The low-resistivity anomalies are interpreted as possible magmatic features and may be related to the low-velocity zones recently detected at greater depth in the same geographic locations. The MT results, thus, provide a necessary upper crustal constraint on the anomalous zone in Chyulu Hills, and we suggest that MT is a logical compliment to seismics for the exploration of the deep crust in this volcanic-covered basement terrain. A detailed 3-D field study is recommended to gain a better understanding of the deep structure of the volcanic field.     

Deep slab subduction and dehydration and their geodynamic consequences: Evidence from seismology and mineral physics

We present new pieces of evidence from seismology and mineral physics for the existence of low-velocity zones in the deep part of the upper mantle wedge and the mantle transition zone that are caused by fluids from the deep subduction and deep dehydration of the Pacific and Philippine Sea slabs under western Pacific and East Asia. The Pacific slab is subducting beneath the Japan Islands and Japan Sea with intermediate-depth and deep earthquakes down to 600 km depth under the East Asia margin, and the slab becomes stagnant in the mantle transition zone under East China. The western edge of the stagnant Pacific slab is roughly coincident with the NE–SW Daxing'Anling-Taihangshan gravity lineament located west of Beijing, approximately 2000 km away from the Japan Trench. The upper mantle above the stagnant slab under East Asia forms a big mantle wedge (BMW). Corner flow in the BMW and deep slab dehydration may have caused asthenospheric upwelling, lithospheric thinning, continental rift systems, and intraplate volcanism in Northeast Asia. The Philippine Sea slab has subducted down to the mantle transition zone depth under Western Japan and Ryukyu back-arc, though the seismicity within the slab occurs only down to 200–300 km depths. Combining with the corner flow in the mantle wedge, deep dehydration of the subducting Pacific slab has affected the morphology of the subducting Philippine Sea slab and its seismicity under Southwest Japan. Slow anomalies are also found in the mantle under the subducting Pacific slab, which may represent small mantle plumes, or hot upwelling associated with the deep slab subduction. Slab dehydration may also take place after a continental plate subducts into the mantle.     

Formation of continental flood volcanism — The perspective of setting of melting

Models of continental flood basalt (CFB) formation are evaluated by examining their implications for the setting, mainly temperature and depth, of melting which is assumed to result from adiabatic decompression. Most attractive is the model of melting in upwelling bodies (probably plume heads) rising to the base of the continental lithosphere. This constrains the melting to 120–150 km or deeper (continental lithospheric thickness) and thus the plume potential temperatures to ≥ 300 °C higher than ambient mantle. The primary melts should be hot, MgO-rich, modified during ascent, and assimilate components of the lithosphere, which can provide the continental-like geochemical signature of many CFB. Circulation within the upwellings and presence of eclogite patches also influence magma generation and composition. Dehydration melting when plumes heat the lowermost lithosphere can generate CFB only if the source region contains ca. 15% hydrous minerals beneath the entire area covered by flood volcanics, which is difficult to justify. On the other hand, assimilation of “continental” chemical components from large parts of the lithosphere does not require such extreme metasomatism. Decompression melting under strongly thinned rifted lithosphere requires lower potential temperatures of the rising material and lesser modification of the primary magmas than the plume head model of CFB formation. Available observations do not support the contemporaneity of flood volcanism with rifts having the required sizes and histories, but more information is needed to further test this model. On the other hand, magma production can assist rift initiation and lithospheric rupture, so subsequent thinning can explain the common formation of volcanic rifted margins immediately following CFB emplacement. Ancient LIP should record the same processes as seen in young CFB.     

Movement of lithospheric plates relative to subduction zones: Formation of marginal seas and active continental margins

Subduction zones with deep seismicity are believed to be associated with the descending branches of convective flows in the mantle and are subordinated to them. Therefore, the position of subduction zones can be considered as relatively fixed with respect to the steady-state system of convective flows. The lithospheric plate overhanging a subduction zone (as a rule of continental type) may:

1. (1) either move away from the subduction zone; or

2. (2) move onto it. In the first case extensional conditions originate behind the subduction zone and the new oceanic crust of back-arc basins forms. In the second case active Andean-type continental margins with thickening of the crust and lithosphere are observed.

Behind the majority of volcanic island-arcs, along the boundary with marginal-sea basins, independent shallow seismicity belts can be traced. They are parallel to the main seismicity belts coinciding with the Benioff zones. The seismicity belts frame island-arc microplates. Island-arc microplates are assumed to be a frame of reference to calculate relative movements of the consuming and overhanging plates. Using slip vector azimuths for shallow seismicity belts in the frontal parts of the Kurile, Japan, Izu-Bonin, Mariana and Tonga—Kermadec arcs, the position of the pole of rotation of the Pacific plate with respect to the western Pacific island-arc microplates was computed. Its coordinates are 66.1°N, 119.2°W. From the global closure of plate movements it has been determined that for the past 10 m.y. the Eurasian and Indian plates have been moving away from the Western Pacific island-arc system, both rotating clockwise, around poles at 31.1°N, 164.2°W and 1.3°S, 157.5°W, respectively. This provides for the opening of the back-arc basins. At the same time South America is moving onto the subduction zone at the rate of 4 cm/yr. Some “hot spots”, such as Hawaiian, Tibesti, and those of the South Atlantic, are moving relative to the island-arc system at a very low rate, viz. 0.5–0.7 cm/yr. Presumably, the western Pacific subduction zone and “hot spots” form a single frame of reference which can generally be used for the analysis of absolute motions.     

Geophysical constraints on understanding the origin of the Illinois basin and its underlying crust

Interpretation of reprocessed seismic reflection profiles reveals three highly coherent, layered, unconformity-bounded sequences that overlie (or are incorporated within) the Proterozoic “granite–rhyolite province” beneath the Paleozoic Illinois basin and extend down into middle crustal depths. The sequences, which are situated in east–central Illinois and west–central Indiana, are bounded by strong, laterally continuous reflectors that are mappable over distances in excess of 200 km and are expressed as broad “basinal” packages that become areally more restricted with depth. Normal-fault reflector offsets progressively disrupt the sequences with depth along their outer margins. We interpret these sequences as being remnants of a Proterozoic rhyolitic caldera complex and/or rift episode related to the original thermal event that produced the granite–rhyolite province. The overall thickness and distribution of the sequences mimic closely those of the overlying Mt. Simon (Late Cambrian) clastic sediments and indicate that an episode of localized subsidence was underway before deposition of the post-Cambrian Illinois basin stratigraphic succession, which is centered farther south over the “New Madrid rift system” (i.e., Reelfoot rift and Rough Creek graben). The present configuration of the Illinois basin was therefore shaped by the cumulative effects of subsidence in two separate regions, the Proterozoic caldera complex and/or rift in east–central Illinois and west–central Indiana and the New Madrid rift system to the south. Filtered isostatic gravity and magnetic intensity data preclude a large mafic igneous component to the crust so that any Proterozoic volcanic or rift episode must not have tapped deeply or significantly into the lower crust or upper mantle during the heating event responsible for the granite–rhyolite.     

东北亚中生代火山岩研究若干问题的思考

东北亚中生代火山岩包括大陆边缘北北东向线型火山岩带,以及大陆内部俄罗斯西伯利亚、蒙古、中国大兴安岭等面型火山岩带。它们是东北亚古亚洲洋构造域向太平洋构造域转换时期深部地幔地球化学过程以及东亚大陆与古太平洋板块相互作用的产物。对它们的研究涉及古生代古亚洲构造域闭合过程的深部地幔的动力学和地球化学演化历史,以及东亚大陆边缘由被动边缘向活动大陆边缘转换历史。古亚洲域大洋岩石圈向地幔深部潜入而引发的热地幔