Rate of formation and dissolution of mercury sulfide nanoparticles: The dual role of natural organic matter

Mercury is a global contaminant of concern due to its transformation by microorganisms to form methylmercury, a toxic species that accumulates in biological tissues. The effect of dissolved organic matter (DOM) isolated from natural waters on reactions between mercury(II) (Hg) and sulfide (S(-II)) to form HgS_(s) nanoparticles across a range of Hg and S(-II) concentrations was investigated. Hg was equilibrated with DOM, after which S(-II) was added. Dissolved Hg (Hg_aq) was periodically quantified using ultracentrifugation and chemical analysis following the addition of S(-II). Particle size and identity were determined using dynamic light scattering and X-ray absorption spectroscopy. S(-II) reacts with Hg to form 20 to 200 nm aggregates consisting of 1-2 nm HgS_(s) subunits that are more structurally disordered than metacinnabar in the presence of 2 × 10⁻⁹ to 8 × 10⁻⁶ M Hg and 10 (mg C) L⁻¹ DOM. Some of the HgS_(s) nanoparticle aggregates are subsequently dissolved by DOM and (re)precipitated by S(-II) over periods of hours to days. At least three fractions of Hg-DOM species were observed with respect to reactivity toward S(-II): 0.3 μmol reactive Hg per mmol C (60 percent), 0.1 μmol per mmol C (20 percent) that are kinetically hindered, and another 0.1 μmol Hg per mmol C (20 percent) that are inert to reaction with S(-II). Following an initial S(-II)-driven precipitation of HgS_(s), HgS_(s) was dissolved by DOM or organic sulfur compounds. HgS_(s) formation during this second phase was counterintuitively favored by lower S(-II) concentrations, suggesting surface association of DOM moieties that are less capable of dissolving HgS_(s). DOM partially inhibits HgS_(s) formation and mediates reactions between Hg and S(-II) such that HgS_(s) is susceptible to dissolution. These findings indicate that Hg accessibility to microorganisms could be controlled by kinetic (intermediate) species in the presence of S(-II) and DOM, undermining the premise that equilibrium Hg species distributions should correlate to the extent or rate of Hg methylation in soils and sediments.     

Enhancement and inhibition of iron photoreduction by individual ligands in open ocean seawater

In laboratory experiments, we investigated the effect of five individual Fe-binding ligands: phaeophytin, ferrichrome, desferrioxamine B (DFOB), inositol hexaphosphate (phytic acid), and protoporphyrin IX (PPIX) on the Fe(II) photoproduction using seawater of the open Southern Ocean. Addition of 10-100 nM Fe(III) to open Southern Ocean seawater without the model ligands and containing; 1.1 nM dissolved Fe(III), 1.75 ± 0.28 equivalents of nM Fe of natural ligands with a conditional stability constant (log K′) of 21.75 ± 0.34 and a concentration DOC of 86.8 ± 1.13 μM C leads to the formation of amorphous Fe(III) hydroxides. These amorphous Fe(III) hydroxides are the major source for the photoproduction of Fe(II). The addition of the model ligands changed the Fe(II) photoproduction considerably and in various ways. Phaeophytin showed higher Fe(II) photoproduction than ferrichrome and the control, i.e., amorphous Fe(III) hydroxides. Additions of phytic acid between 65 and 105 nM increased the concentration of photoproduced Fe(II) with 0.16 nM Fe(II) per nM phytic acid, presumably due to the co-aggregation of Fe(III) and phytic acid leading via an increasing colloidal surface to an increasing photoreducible Fe(III) fraction. DFOB and PPIX strongly decreased the photoproduced Fe(II) concentration. The low Fe(II) photoproduction with DFOB confirmed reported observations that Fe(III) complexed to DFOB is photo-stable. The PPIX hardly binds Fe(III) in the open Southern Ocean seawater but decreased the photoproduced Fe(II) concentration by complexing the Fe(II) with a binding rate constant of k_Fe(II)PPIX = 1.04 × 10⁻⁴ ± 1.53 × 10⁻⁵ s⁻¹ nM⁻¹ PPIX. Subsequently, PPIX is suggested to act as a photosensitizing producer of superoxide, thus increasing the dark reduction of Fe(III) to Fe(II). Our research shows that the photochemistry of Fe(III) and the resulting photoproduced Fe(II) concentration is strongly depending on the identity of the Fe-binding organic ligands and that a translation to natural conditions is not possible without further characterization of the natural occurring ligands.     

Surface chemistry and structural properties of mackinawite prepared by reaction of sulfide ions with metallic iron

Tetragonal FeS_1−x mackinawite, has been synthesized by reacting metallic iron with a sodium sulfide solution and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), transmission Mössbauer spectroscopy (TMS) and X-ray photoelectron spectroscopy (XPS). Based on XRD and TEM analyses, synthetic mackinawite exhibits crystallization and is identical to the natural mineral. Unit cell parameters derived from XRD data are a = b = 0.3670 nm and c = 0.5049 nm. The bulk Fe:S ratio derived from the quantitative dispersive energy analysis is practically 1. XPS analyses, however, showed that mackinawite surface is composed of both Fe(II) and Fe(III) species bound to monosulfide. Accordingly, monosulfide is the dominant S species observed at the surface with lesser amount of polysulfides and elemental sulfur. TMS analysis revealed the presence of both Fe(II) and Fe(III) in the mackinawite structure, thus supporting the XPS analysis. We propose that the iron monosulfide phase synthesized by reacting metallic iron and dissolved sulfide is composed of Fe(II) and S(-II) atoms with the presence of a weathered thin layer covering the bulk material that consists of both Fe(II) and Fe(III) bound to S(-II) atoms and in a less extent of polysulfide and elemental sulfur.     

Iron isotope fractionation and atom exchange during sorption of ferrous iron to mineral surfaces

The application of stable Fe isotopes as a tracer of the biogeochemical Fe cycle necessitates a mechanistic knowledge of natural fractionation processes. We studied the equilibrium Fe isotope fractionation upon sorption of Fe(II) to aluminum oxide (γ-Al₂O₃), goethite (α-FeOOH), quartz (α-SiO₂), and goethite-loaded quartz in batch experiments, and performed continuous-flow column experiments to study the extent of equilibrium and kinetic Fe isotope fractionation during reactive transport of Fe(II) through pure and goethite-loaded quartz sand. In addition, batch and column experiments were used to quantify the coupled electron transfer-atom exchange between dissolved Fe(II) (Fe(II)_aq) and structural Fe(III) of goethite. All experiments were conducted under strictly anoxic conditions at pH 7.2 in 20 mM MOPS (3-(N-morpholino)-propanesulfonic acid) buffer and 23 °C. Iron isotope ratios were measured by high-resolution MC-ICP-MS. Isotope data were analyzed with isotope fractionation models. In batch systems, we observed significant Fe isotope fractionation upon equilibrium sorption of Fe(II) to all sorbents tested, except for aluminum oxide. The equilibrium enrichment factor, , of the Fe(II)_sorb-Fe(II)_aq couple was 0.85 ± 0.10‰ (±2σ) for quartz and 0.85 ± 0.08‰ (±2σ) for goethite-loaded quartz. In the goethite system, the sorption-induced isotope fractionation was superimposed by atom exchange, leading to a δ^56/54Fe shift in solution towards the isotopic composition of the goethite. Without consideration of atom exchange, the equilibrium enrichment factor was 2.01 ± 0.08‰ (±2σ), but decreased to 0.73 ± 0.24‰ (±2σ) when atom exchange was taken into account. The amount of structural Fe in goethite that equilibrated isotopically with Fe(II)_aq via atom exchange was equivalent to one atomic Fe layer of the mineral surface (∼3% of goethite-Fe). Column experiments showed significant Fe isotope fractionation with δ^56/54Fe(II)_aq spanning a range of 1.00‰ and 1.65‰ for pure and goethite-loaded quartz, respectively. Reactive transport of Fe(II) under non-steady state conditions led to complex, non-monotonous Fe isotope trends that could be explained by a combination of kinetic and equilibrium isotope enrichment factors. Our results demonstrate that in abiotic anoxic systems with near-neutral pH, sorption of Fe(II) to mineral surfaces, even to supposedly non-reactive minerals such as quartz, induces significant Fe isotope fractionation. Therefore we expect Fe isotope signatures in natural systems with changing concentration gradients of Fe(II)_aq to be affected by sorption.     

Schwertmannite transformation to goethite via the Fe(II) pathway: Reaction rates and implications for iron-sulfide formation

Schwertmannite (Fe₈O₈(OH)₆SO₄) is a common Fe(III)-oxyhydroxysulfate mineral in acid-sulfate systems, where its formation and fate strongly influence water quality. The present study examines transformation of schwertmannite to goethite (FeOOH), as catalyzed by interactions with Fe(II) in anoxic aquatic environments. This study also evaluates the role of the Fe(II) pathway in influencing the formation of iron-sulfide minerals in such environments. At pH > 5, the rates of Fe(II)-catalyzed schwertmannite transformation were several orders of magnitude faster than transformation in the absence of Fe(II). Complete transformation of schwertmannite occurred within only 3-5 h at pH > 6 and Fe(II)_(aq) ? 5 mmol L⁻¹. Model calculations indicate that the Fe(II)-catalyzed transformation of schwertmannite to goethite greatly decreases the reactivity of the Fe(III) pool, thereby favoring SO₄-reduction and facilitating the formation of iron-sulfide minerals (particularly mackinawite, tetragonal FeS). Examination of in situ sediment geochemistry in an acid-sulfate system revealed that the rapid Fe(II)-catalyzed transformation was consistent with an abrupt shift from an acidic Fe(III)-reducing regime with abundant schwertmannite near the sediment surface, to a near-neutral mackinawite-forming regime where goethite was dominant. This study demonstrates that the Fe(II) pathway exerts a major influence on schwertmannite transformation and iron-sulfide formation in anoxic acid-sulfate systems. These findings have important implications for understanding acidity dynamics and trace element mobility in such systems.     

Surface simulation studies of the hydration of white rust Fe(OH)2, goethite α-FeO(OH) and hematite α-Fe2O3

Computer modelling techniques were used to elucidate the hydration behaviour of three iron (hydr)oxide minerals at the atomic level: white rust, goethite and hematite. A potential model was first adapted and tested against the bulk structures and properties of eight different iron oxides, oxyhydroxides and hydroxides, followed by surface simulations of Fe(OH)₂, α-FeO(OH) and α-Fe₂O₃. The major interaction between the adsorbing water molecules and the surface is through interaction of their oxygen ions with surface iron ions, followed by hydrogen-bonding to surface oxygen ions. The energies released upon the associative adsorption of water range from 1 to 17 kJ mol⁻¹ for Fe(OH)₂, 26 to 80 kJ mol⁻¹ for goethite and 40 to 85 kJ mol⁻¹ for hematite, reflecting the increasing oxidation of the iron mineral. Dissociative adsorption at goethite and hematite surfaces releases larger hydration energies, ranging from 120 to 208 kJ mol⁻¹ for goethite and 76 to 190 kJ mol⁻¹ for hematite.The thermodynamic morphologies of the minerals, based on the calculated surface energies, agree well with experimental morphologies, where these are available. When the partial pressures required for adsorption of water from the gas phase are plotted against temperature for the goethite and hematite surfaces, taking into account experimental entropies for water, it appears that these minerals may well be instrumental in the retention of water during the cyclic variations in the atmosphere of Mars.     

Sedimentary iron geochemistry in acidic waterways associated with coastal lowland acid sulfate soils

We examined the solubility, mineralogy and geochemical transformations of sedimentary Fe in waterways associated with coastal lowland acid sulfate soils (CLASS). The waterways contained acidic (pH 3.26-3.54), Fe^III-rich (27-138 μM) surface water with low molar Cl:SO₄ ratios (0.086-5.73). The surficial benthic sediments had high concentrations of oxalate-extractable Fe(III) due to schwertmannite precipitation (kinetically favoured by 28-30% of aqueous surface water Fe being present as the Fe^III species). Subsurface sediments contained abundant pore-water HCO₃ (6-20 mM) and were reducing (Eh < −100 mV) with pH 6.0-6.5. The development of reducing conditions caused reductive dissolution of buried schwertmannite and goethite (formed via in situ transformation of schwertmannite). As a consequence, pore-water Fe^II concentrations were high (>2 mM) and were constrained by precipitation-dissolution of siderite. The near-neutral, reducing conditions also promoted SO₄-reduction and the formation of acid-volatile sulfide (AVS). The results show, for the first time for CLASS-associated waterways, that sedimentary AVS consisted mainly of disordered mackinawite. In the presence of abundant pore-water Fe^II, precipitation-dissolution of disordered mackinawite maintained very low (i.e. <0.1 μM) S^−II concentrations. Such low concentrations of S^−II caused slow rates for conversion of disordered mackinawite to pyrite, thereby resulting in relatively low concentrations of pyrite (<300 μmol g⁻¹ as Fe) compared to disordered mackinawite (up to 590 μmol g⁻¹ as Fe). This study shows that interactions between schwertmannite, goethite, siderite, disordered mackinawite and pyrite control the geochemical behaviour of sedimentary Fe in CLASS-associated waterways.     

Aeration to degas CO2, increase pH,and increase iron oxidation rates for efficient treatment of net alkaline mine drainage

Passive treatment systems for mine drainage use no energy other than gravity, but they require greater area than active treatment systems. Researchers are considering “hybrid” systems that have passive and active components for increased efficiency, especially where space limitations render passive-only technology ineffective. Flow-through reactor field experiments were conducted at two large net-alkaline anthracite mine discharges in central Pennsylvania. Assuming an Fe removal rate of 20 g m⁻² day⁻¹ and Fe loading from field data, 3.6 × 10³ and 3.0 × 10⁴ m² oxidation ponds would be required for the passive treatment of Site 21 and Packer 5 discharges, respectively. However, only a small area is available at each site. This paper demonstrates aeration to drive off CO₂, increase pH, and increase Fe(II) oxidation rates, enabling treatment within a small area compared to passive treatment methods, and introduces a geochemical model to accurately predict these rates as well as semi-passive treatment system sizing parameters. Both net-alkaline discharges were suboxic with a pH of ≈5.7, Fe(II) concentration of ≈16 mg L⁻¹, and low Mn and Al concentrations. Flow rates were ≈4000 L min⁻¹ at Site 21 and 15,000 L min⁻¹ at Packer 5. Three-h aeration experiments with flow rates scaled to a 14-L reactor resulted in pH increases from 5.7 to greater than 7, temperature increases from 12 to 22 °C, dissolved O₂ increases to saturation with respect to the atmosphere, and Fe(II) concentration decreases from 16 to <0.05 mg L⁻¹. A 17,000-L pilot-scale reactor at Site 21 produced similar results although aeration was not as complete as in the smaller reactor. Two non-aerated experiments at Site 21 with 13 and 25-h run times resulted in pH changes of ?0.2 and Fe(II) concentration decreases of less than 3 mg L⁻¹.     

Kinetics of iron (II) oxidation determined in the field

This paper presents the results of extensive field trials measuring rates of Fe(II) oxidation at a number of Fe-bearing mine drainage discharges in the UK. Batch experiments were carried out with samples taken at regular intervals and Fe(II) concentration determined spectrophotometrically using 2′2-bipyridyl as the complexing agent. Initial concentrations for Fe(II) were 5.65-76.5 mg/L. Temperature, pH and dissolved O₂ (DO) were logged every 10 s, with pH at the start of the experiments in the range 5.64-6.95 and alkalinity ranging from 73 to 741 mg/L CaCO₃ equivalent. A numerical model based on a fourth order Runge-Kutta method was developed to calculate values for k₁, the rate constant for homogeneous oxidation, from the experimental data. The measured values of pH, temperature, [Fe(II)] and DO were input into the model with resulting values for k₁ found to be in the range 2.7 × 10¹⁴-2.7 × 10¹⁶ M⁻² atm⁻¹ min⁻¹. These values for k₁ are 1-3 orders of magnitude higher than previously reported for laboratory studies at a similar pH. Comparison of the observed Fe(II) oxidation rates to data published by other authors show a good correlation with heterogenous oxidation rates and may indicate the importance of autocatalysis in these systems. These higher than expected rates of Fe oxidation could have a significant impact on the design of treatment schemes for the remediation of mine drainage and other Fe-bearing ground waters in the future.     

Oxygen isotope fractionation of dissolved oxygen during reduction by ferrous iron

The oxygen isotope fractionation factor of dissolved oxygen gas has been measured during inorganic reduction by aqueous FeSO₄ at 10−54 °C under neutral (pH 7) and acidic (pH 2) conditions, with Fe(II) concentrations ranging up to 0.67 mol L⁻¹, in order to better understand the geochemical behavior of oxygen in ferrous iron-rich groundwater and acidic mine pit lakes. The rate of oxygen reduction increased with increasing temperature and increasing Fe(II) concentration, with the pseudo-first-order rate constant k ranging from 2.3 to 82.9 × 10⁻⁶ s⁻¹ under neutral conditions and 2.1 to 37.4 × 10⁻⁷ s⁻¹ under acidic conditions. The activation energy of oxygen reduction was 30.9 ± 6.6 kJ mol⁻¹ and 49.7 ± 13.0 kJ mol⁻¹ under neutral and acidic conditions, respectively. Oxygen isotope enrichment factors (ε) become smaller with increasing temperature, increasing ferrous iron concentration, and increasing reaction rate under acidic conditions, with ε values ranging from −4.5‰ to −11.6‰. Under neutral conditions, ε does not show any systematic trends vs. temperature or ferrous iron concentration, with ε values ranging from −7.3 to −10.3‰. Characterization of the oxygen isotope fractionation factor associated with O₂ reduction by Fe(II) will have application to elucidating the process or processes responsible for oxygen consumption in environments such as groundwater and acidic mine pit lakes, where a number of possible processes (e.g. biological respiration, reduction by reduced species) may have taken place.     

Iron(III) accumulations in inland saline waterways,Hunter Valley,Australia: Mineralogy,micromorphology and pore-water geochemistry

Discharge of Fe(II)-rich groundwaters into surface-waters results in the accumulation of Fe(III)-minerals in salinized sand-bed waterways of the Hunter Valley, Australia. The objective of this study was to characterise the mineralogy, micromorphology and pore-water geochemistry of these Fe(III) accumulations. Pore-waters had a circumneutral pH (6.2–7.2), were sub-oxic to oxic (Eh 59–453 mV), and had dissolved Fe(II) concentrations up to 81.6 mg L⁻¹. X-ray diffraction (XRD) on natural and acid-ammonium-oxalate (AAO) extracted samples indicated a dominance of 2-line ferrihydrite in most samples, with lesser amounts of goethite, lepidocrocite, quartz, and alumino-silicate clays. The majority of Fe in the samples was bound in the AAO extractable fraction (Fe^Ox) relative to the Na-dithionite extractable fraction (Fe^Di), with generally high Fe^Ox:Fe^Di ratios (0.52–0.92). The presence of nano-crystalline 2-line ferrihydrite (Fe₅HO₃·4H₂O) with lesser amounts of goethite (α-FeOOH) was confirmed by scanning electron microscopy (SEM) coupled with energy dispersive X-ray analysis (EDX), and transmission electron microscopy (TEM) coupled with selected area electron diffraction (SAED). In addition, it was found that lepidocrocite (γ-FeOOH), which occurred as nanoparticles as little as ∼5 lattice spacings thick perpendicular to the (0 2 0) lattice plane, was also present in the studied Fe(III) deposits. Overall, the results highlight the complex variability in the crystallinity and particle-size of Fe(III)-minerals which form via oxidation of Fe(II)-rich groundwaters in sand-bed streams. This variability may be attributed to: (1) divergent precipitation conditions influencing the Fe(II) oxidation rate and the associated supply and hydrolysis of the Fe(III) ion, (2) the effect of interfering compounds, and (3) the influence of bacteria, especially Leptothrix ochracea.     

Arsenic, iron and sulfur co-diagenesis in lake sediments

Profiles of porewater pH and dissolved As, Fe, Mn, sulfate, total sulfide (ΣS^−II), total zero-valent sulfur (ΣS⁰), organic carbon and major ion concentrations, as well as those of solid As, acid-volatile sulfide (AVS), total S, Fe, Mn, Al, organic C, ²¹⁰Pb and ¹³⁷Cs were determined in the sediment of four lakes spanning a range of redox and geochemical conditions. An inverse modeling approach, based on a one-dimensional transport-reaction equation assuming steady-state, was applied to the porewater As profiles and used to constrain the net rates of reactions involving As (). The model defines depth intervals where As is either released to (positive ) or removed from (negative ) the porewaters.At two of the sites, whose bottom water were oxygenated at sampling time, a production zone ( = 12 × 10⁻¹⁸ mol cm⁻³ s⁻¹-71 × 10⁻¹⁸ mol cm⁻³ s⁻¹) is inferred a few cm below the sediment-water interface, coincident with sharp porewater As and Fe peaks that indicate an intense coupled recycling of As and Fe. This process is confirmed by solid As and Fe maxima just below the sediment surface. In these two lakes a zone of As consumption ( = −5 × 10⁻¹⁸ mol cm⁻³ s⁻¹ to −53 × 10⁻¹⁸ mol cm⁻³ s⁻¹), attributed to the slow adsorption of As to authigenic Fe oxyhydroxides, occurs just above the production zone. A second-order rate constant of 0.12 ± 0.03 cm³ mol⁻¹ s⁻¹ is estimated for this adsorption reaction.Such features in the porewater and solid profiles were absent from the two other lakes that develop a seasonally anoxic hypolimnion. Thermodynamic calculations indicate that the porewaters of the four lakes, when sulfidic (i.e., ΣS^−II ? 0.1 μM), were undersaturated with respect to all known solid As sulfides; the calculation also predicts the presence of As^V oxythioanions in the sulfidic waters, as suggested by a recent study. In the sulfidic waters, the removal of As ( = −1 × 10⁻¹⁸ mol cm⁻³ s⁻¹ to −23 × 10⁻¹⁸ mol cm⁻³ s⁻¹) consistently occurred when saturation, with respect to FeS_(s), was reached and when As^V oxythioanions were predicted to be significant components of total dissolved As. This finding has potential implications for As transport in other anoxic waters and should be tested in a wider variety of natural environments.     

The reactivity of iron oxides towards reductive dissolution with ascorbic acid in a shallow sandy aquifer (Rømø, Denmark)

The pool of iron oxides, available in sediments for reductive dissolution, is usually estimated by wet chemical extraction methods. Such methods are basically empirically defined and calibrated against various synthetic iron oxides. However, in natural sediments, iron oxides are present as part of a complex mixture of iron oxides with variable crystallinity, clays and organics etc. Such a mixture is more accurately described by a reactive continuum covering a range from highly reactive iron oxides to non-reactive iron oxide. The reactivity of the pool of iron oxides in sediment can be determined by reductive dissolution in 10 mM ascorbic acid at pH 3. Parallel dissolution experiments in HCl at pH 3 reveal the release of Fe(II) by proton assisted dissolution. The difference in Fe(II)-release between the two experiments is attributed to reductive dissolution of iron oxides and can be quantified using the rate equation J/m₀ = k′(m/m₀)^γ, where J is the overall rate of dissolution (mol s⁻¹), m₀ the initial amount of iron oxide, k′ a rate constant (s⁻¹), m/m₀ the proportion of undissolved mineral and γ a parameter describing the change in reaction rate over time. In the Rømø aquifer, Denmark, the reduction of iron oxides is an important electron accepting process for organic matter degradation and is reflected by the steep increase in aqueous Fe²⁺ over depth. Sediment from the Rømø aquifer was used for reductive dissolution experiments with ascorbic acid. The rate parameters describing the reactivity of iron oxides in the sediment are in the range k′ = 7·10⁻⁶ to 1·10⁻³ s⁻¹ and γ = 1 to 2.4. These values are intermediate between a synthetic 2-line ferrihydrite and a goethite. The rate constant increases by two orders of magnitude over depth suggesting an increase in iron oxide reactivity with depth. This increase was not captured by traditional oxalate and dithionite extractions.     

Structural constraints of ferric (hydr)oxides on dissimilatory iron reduction and the fate of Fe(II)

Due to the strong reducing capacity of ferrous Fe, the fate of Fe(II) following dissimilatory iron reduction will have a profound bearing on biogeochemical cycles. We have previously observed the rapid and near complete conversion of 2-line ferrihydrite to goethite (minor phase) and magnetite (major phase) under advective flow in an organic carbon-rich artificial groundwater medium. Yet, in many mineralogically mature environments, well-ordered iron (hydr)oxide phases dominate and may therefore control the extent and rate of Fe(III) reduction. Accordingly, here we compare the reducing capacity and Fe(II) sequestration mechanisms of goethite and hematite to 2-line ferrihydrite under advective flow within a medium mimicking that of natural groundwater supplemented with organic carbon. Introduction of dissolved organic carbon upon flow initiation results in the onset of dissimilatory iron reduction of all three Fe phases (2-line ferrihydrite, goethite, and hematite). While the initial surface area normalized rates are similar (∼10⁻¹¹ mol Fe(II) m⁻² g⁻¹), the total amount of Fe(III) reduced over time along with the mechanisms and extent of Fe(II) sequestration differ among the three iron (hydr)oxide substrates. Following 16 d of reaction, the amount of Fe(III) reduced within the ferrihydrite, goethite, and hematite columns is 25, 5, and 1%, respectively. While 83% of the Fe(II) produced in the ferrihydrite system is retained within the solid-phase, merely 17% is retained within both the goethite and hematite columns. Magnetite precipitation is responsible for the majority of Fe(II) sequestration within ferrihydrite, yet magnetite was not detected in either the goethite or hematite systems. Instead, Fe(II) may be sequestered as localized spinel-like (magnetite) domains within surface hydrated layers (ca. 1 nm thick) on goethite and hematite or by electron delocalization within the bulk phase. The decreased solubility of goethite and hematite relative to ferrihydrite, resulting in lower Fe(III)_aq and bacterially-generated Fe(II)_aq concentrations, may hinder magnetite precipitation beyond mere surface reorganization into nanometer-sized, spinel-like domains. Nevertheless, following an initial, more rapid reduction period, the three Fe (hydr)oxides support similar aqueous ferrous iron concentrations, bacterial populations, and microbial Fe(III) reduction rates. A decline in microbial reduction rates and further Fe(II) retention in the solid-phase correlates with the initial degree of phase disorder (high energy sites). As such, sustained microbial reduction of 2-line ferrihydrite, goethite, and hematite appears to be controlled, in large part, by changes in surface reactivity (energy), which is influenced by microbial reduction and secondary Fe(II) sequestration processes regardless of structural order (crystallinity) and surface area.     

Iron weathering products in a CO2 + (H2O or H2O2) atmosphere: Implications for weathering processes on the surface of Mars

Various iron-bearing primary phases and rocks have been weathered experimentally to simulate possible present and past weathering processes occurring on Mars. We used magnetite, monoclinic and hexagonal pyrrhotites, and metallic iron as it is suggested that meteoritic input to the martian surface may account for an important source of reduced iron. The phases were weathered in two different atmospheres: one composed of CO₂ + H₂O, to model the present and primary martian atmosphere, and a CO₂ + H₂O + H₂O₂ atmosphere to simulate the effect of strong oxidizing agents. Experiments were conducted at room temperature and a pressure of 0.75 atm. Magnetite is the only stable phase in the experiments and is thus likely to be released on the surface of Mars from primary rocks during weathering processes. Siderite, elemental sulfur, ferrous sulfates and ferric (oxy)hydroxides (goethite and lepidocrocite) are the main products in a water-bearing atmosphere, depending on the substrate. In the peroxide atmosphere, weathering products are dominated by ferric sulfates and goethite. A kinetic model was then developed for iron weathering in a water atmosphere, using the shrinking core model (SCM). This model includes competition between chemical reaction and diffusion of reactants through porous layers of secondary products. The results indicate that for short time scales, the mechanism is dominated by a chemical reaction with second order kinetics (k = 7.75 × 10⁻⁵ g⁻¹/h), whereas for longer time scales, the mechanism is diffusion-controlled (De_A = 2.71 × 10⁻¹⁰ m²/h). The results indicate that a primary CO₂- and H₂O-rich atmosphere should favour sulfur, ferrous phases such as siderite or Fe²⁺-sulfates, associated with ferric (oxy)hydroxides (goethite and lepidocrocite). Further evolution to more oxidizing conditions may have forced these precursors to evolve into ferric sulfates and goethite/hematite.     

Experimental analysis of arsenic precipitation during microbial sulfate and iron reduction in model aquifer sediment reactors

Microbial SO₄²⁻ reduction limits accumulation of aqueous As in reducing aquifers where the sulfide that is produced forms minerals that sequester As. We examined the potential for As partitioning into As- and Fe-sulfide minerals in anaerobic, semi-continuous flow bioreactors inoculated with 0.5% (g mL⁻¹) fine-grained alluvial aquifer sediment. A fluid residence time of three weeks was maintained over a ca. 300-d incubation period by replacing one-third of the aqueous phase volume of the reactors with fresh medium every seven days. The medium had a composition comparable to natural As-contaminated groundwater with slightly basic pH (7.3) and 7.5 μM aqueous As(V) and also contained 0.8 mM acetate to stimulate microbial activity. Medium was delivered to a reactor system with and without 10 mmol L⁻¹ synthetic goethite (α-FeOOH). In both reactors, influent As(V) was almost completely reduced to As(III). Pure As-sulfide minerals did not form in the Fe-limited reactor. Realgar (As₄S₄) and As₂S₃(am) were undersaturated throughout the experiment. Orpiment (As₂S₃) was saturated while sulfide content was low (∼50 to 150 μM), but precipitation was likely limited by slow kinetics. Reaction-path modeling suggests that, even if these minerals had formed, the dissolved As content of the reactor would have remained at hazardous levels. Mackinawite (Fe_1 + xS; x ? 0.07) formed readily in the Fe-bearing reactor and held dissolved sulfide at levels below saturation for orpiment and realgar. The mackinawite sequestered little As (<0.1 wt.%), however, and aqueous As accumulated to levels above the influent concentration as microbial Fe(III) reduction consumed goethite and mobilized adsorbed As. A relatively small amount of pyrite (FeS₂) and greigite (Fe₃S₄) formed in the Fe-bearing reactor when we injected a polysulfide solution (Na₂S₄) to a final concentration of 0.5 mM after 216, 230, 279, and 286 days. The pyrite, and to a lesser extent the greigite, that formed did sequester As from solution, containing 0.84 and 0.23 wt.% As on average, respectively. Our results suggest that As precipitation during Fe-sulfide formation in nature occurs mainly in conjunction with pyrite formation. Our findings imply that the effectiveness of stimulating microbial SO₄²⁻ reduction to remediate As contamination may be limited by the rate and extent of pyrite formation and the solubility of As-sulfides.     

Influence of phosphate on the oxidation kinetics of nanomolar Fe(II) in aqueous solution at circumneutral pH

The oxygenation kinetics of nanomolar concentrations of Fe(II) in aqueous solution have been studied in the absence and presence of millimolar concentrations of phosphate over the pH range 6.0-7.8. At each phosphate concentration investigated, the overall oxidation rate constant varied linearly with pH, and increased with increasing phosphate concentration. A model based on equilibrium speciation of Fe(II) was found to satisfactorily explain the results obtained. From this model, the rate constants for oxygenation of the Fe(II)-phosphate species FeH₂PO₄⁺, FeHPO₄ and FePO₄⁻ have been determined for the first time. FePO₄⁻ was found to be the most kinetically reactive species at circumneutral pH with an estimated oxygenation rate constant of (2.2 ± 0.2) × 10 M⁻¹ s⁻¹. FeH₂PO₄⁺ and FeHPO₄ were found to be less reactive with oxygen, with rate constants of (3.2 ± 2) × 10⁻² M⁻¹ s⁻¹ and (1.2 ± 0.8) × 10⁻¹ M⁻¹ s⁻¹, respectively.     

Geochemical comparison of waters and stream sediments close to abandoned Sb-Au and As-Au mining areas,northern Portugal

Waters from abandoned Sb-Au mining areas have higher Sb (up to 2138 μg L⁻¹), As (up to 1252 μg L⁻¹) and lower Al, Zn, Li, Ni and Co concentrations than those of waters from the As-Au mining area of Banjas, which only contain up to 64 μg L⁻¹ As. In general, Sb occurs mainly as SbO₃⁻ and As H₂AsO₄⁻. In general, waters from old Sb-Au mining areas are contaminated in Sb, As, Al, Fe, Cd, Mn, Ni and NO₂⁻, whereas those from the abandoned As-Au mining area are contaminated in Al, Fe, Mn, Ni, Cd and rarely in NO₂⁻. Waters from the latter area, immediately downstream of mine dumps are also contaminated in As. In stream sediments from Sb-Au and As-Au mining areas, Sb (up to 5488 mg kg⁻¹) and As (up to 235 mg kg⁻¹) show a similar behaviour and are mainly associated with the residual fraction. In most stream sediments, the As and Sb are not associated with the oxidizable fraction, while Fe is associated with organic matter, indicating that sulphides (mainly arsenopyrite and pyrite) and sulphosalts containing those metalloids and metal are weathered. Arsenic and Sb are mainly associated with clay minerals (chlorite and mica; vermiculite in stream sediments from old Sb-Au mining areas) and probably also with insoluble Sb phases of stream sediments. In the most contaminated stream sediments, metalloids are also associated with Fe phases (hematite and goethite, and also lepidocrocite in stream sediments from Banjas). Moreover, the most contaminated stream sediments correspond to the most contaminated waters, reflecting the limited capacity of stream sediments to retain metals and metalloids.     

Determination of sulfide ligands and association with natural organic matter

Group B metals, such as Hg, Cu, Ag, Pb and Cd bind strongly to reduced inorganic and organic S(II−) ligands. These S(II−) ligands, stable in oxic waters for significant periods of time, occur at the <1–100 s nM concentrations. It is hypothesized that S(II−) ligands are stabilized as Cu–S molecules associated with organic matter by multi-ligand binding or in nano-pore encapsulations in organic matter. S(II−) ligands are estimated by two methods: purge/trap analysis as Cr-reducible sulfide (CRS), and strong ligand (SL_T) from a competitive ligand titration with Ag(I). The CRS/SL_T ratio is nearly one for selected samples. CRS correlates reasonably well (r² ∼ 0.5) with organic C with a slope of 14.6 nM per mg C. The conditional binding constant of Ag–SL is 11.3 for effluent associated with waste-water and decreases for river waters from about 12–8.8 as the strong sites are occupied with Ag(I).     

The evolution of surface layers formed during chalcopyrite leaching

Chalcopyrite (CuFeS₂) leaching in perchloric acid (HClO₄) at an initial pH of one and a temperature of 85 °C has been examined. The rate of leaching of Cu and Fe increased progressively over the duration of the experiment. The Cu leach rate was initially greater (up to 24 h) but thereafter the leach rates for Cu and Fe were approximately equal. After 313 h 81% Cu release was achieved at which time the leach experiment was terminated. Only 25% of the available S was released into solution during the leaching process. Surface speciation over the duration of the leach was examined using X-ray photoelectron spectroscopy (XPS), time of flight secondary ion mass spectrometry (ToF-SIMS) and scanning electron microscopy (SEM). As a result, a three-step reaction pathway is proposed. The first oxidation step involves the release of Cu and Fe into solution and the polymerisation of monosulfide (S²⁻) to polysulfide . The subsequent reduction step does not result in the release of cations to solution but does result in the reformation of surface S²⁻ and other short chain polysulfides, which then on further oxidation restructure to form crystalline elemental sulfur (S⁰). This final oxidation step is accompanied by further cation release.