贵州黑色岩系金-铂族元素地球化学特征及成因分析

为探讨贵州下寒武统黑色岩系中铂族元素物质来源及钼-镍、钒多金属形成的沉积环境与成矿作用,在钼-镍、钒多金属层及其顶底页岩、底部硅质岩中采集样品测试分析。通过对样品中金、铂族元素含量(质量分数)及其地球化学特征值研究,结果表明：黑色岩系中金及铂族元素含量显示协同变化特征;Pd富集,Ru、Ir亏损明显,Pt、Rh、Os基本持平或略有变化;样品的原始地幔标准值标准化模式配分曲线从Os、Ru、Rh、Ir、Pt到Pd大致呈“W”型,配分曲线略呈左倾,总体上呈现w(Pd)>w(Pt)>w(Os)>w(Rh)>w(Ru)>w(Ir)的变化关系;黑色岩系铂族元素来源与正常海水及海底热水喷流作用关系密切,地外来源可能性极小;黑色岩系钼-镍、钒多金属层中铂族元素的富集存在单独成矿作用或成矿作用的叠加,而且在钒多金属层内局部存在分层或条带分异。     

铂族元素钌(Ru)异常及其地质意义探讨

铂族元素(简称PGE,包括Pt、Pd、Rh、Ru、Ir、Os)的地球化学性质独特,为强烈亲硫的元素,其中,IPGE(Ir,Ru,Os)是高温矿物(橄榄石、尖晶石、铬铁矿等)的相容元素,PPGE(Pt,Pd,Rh)是强不相容元素.     

黔西玄武岩铂、钯地球化学特征与存在状态

黔西玄武岩中铂族元素丰度较高，其含量变化顺序为Pt〉Pd〉Ru〉Ir〉Rh，表现为Pt、Pd富集，而Os、Ir、Ru、Rh亏损，说明在地幔熔融形成玄武岩的过程中，铂族元素已发生了明显的分异。在分析黔西玄武岩中Pt、Pd岩石载体所处的大地构造背景、含铂（族）矿床的可能类型和岩石化学特征与Pt、Pd可能存在状态的关系的基础上，研究了黔西玄武岩中Pt、Pd存在状态。结果表明，其状态分属硫化物态．金属互化物态、类质同像亲石态和吸附态，且各状态丰度值依次减少。     

陕西太白金矿含金角砾岩中铂族元素特征

采用硫镍火法试金(NiS-FA)结合电感耦合等离子质谱(ICP-MS)分析了太白金矿硫化物和含金角砾岩中铂族元素的含量,结果显示,与秦岭地区八卦庙相比铂族元素含量较高,而低于原始地幔,其中铂(Pt)、钯(Pd)、钌(Ru)富集,并结合前人研究资料对铂族元素的来源和迁移机制进行探讨。铂族元素可能受深源的影响,IPGE(Ir、Os、Ru)可能主要以硫化物形式存在而PPGE(Rh、Pt、Pd)可能主要以单质存在。     

某岩体含铂矿石锇铱铑品位预报方程的建立

硫化铜镍矿床中伴生的铂族元素以Pt、Pd为主,Os、Ru、Ir、Rh含量通常较低,但价格比Pt、Pd昂贵得多.如何综合评价这些含量较低的伴生铂族元素是普查勘探工作应解决的问题之一.一种作法是将主金属Ni、Cu及6种铂族元素一并列入样品的基本分析项目,这样做便于储量计算,但将增加试金分析工作量,影响矿床勘探速度;另一种作法是只将Ni、Cu、Pt、Pd列入基本分析项目,其余4种伴生铂族元素仅在组合分析样品中进行测定,这样虽节省大量试金分析,却又给储量计算带来困难.本文应用一元线性回归分析方法,尝试依据若干代表性钻孔含铂矿石的基本分析数据,利用Os、Ru、Ir、Rh含量的密切相关关系建立预报方程,以期在只测定矿石中Ru含量的前提下,对Os、Ir、Rh品位进行预报,并讨论了预报的精确度和实际应用的可能性.     

四川木落稀土矿床方解石铂族元素地球化学特征

方解石作为木落稀土矿床常见的脉石矿物,其中的铂族元素(简称PGE)地球化学特征有可能记录了地质流体的性质。采用ICP-MS分析木落方解石中PGE的含量,并对铂族元素的分布、相关性、成因进行了探讨。木落方解石可以分为两类:I型方解石和Ⅱ型方解石。I型方解石中∑PGE(不含Os)0.62～1.33ng/g,具相对低的Pd/Pt、Pd/Rh、Pd/Ru、Pd/Ir比值,不太显著的Pt-Pd分配模式,为岩浆成因方解石,与成矿作用密切相关;Ⅱ型方解石中∑PGE(不含Os)1.85～2.97ng/g,具相对高的Pd/Pt、Pd/Rh、Pd/Ru、Pd/Ir比值和显著的Pt-Pd分配模式,为热液成因方解石,代表了成矿作用后的一期地质流体作用,与成矿关系不大,仅局部地区存在改造前次流体作用形成的稀土矿体。富CO2热液具有携带PGE的能力,并能够导致PGE的分异,与富CO2岩浆相比,富CO2热液对铂族元素具有一定程度的富集作用。     

煎茶岭硫化镍矿床的铂族元素地球化学特征及其意义

采用ICP-MS分析方法对煎茶岭硫化镍矿床岩石及矿石的铂族元素地球化学研究表明,煎茶岭矿床蛇纹岩的Cu/Pd值低于原生地幔岩浆的Cu/Pd值,说明岩浆熔离作用较弱,其Au/Pd值反映存在后期变质热液成矿作用镍矿石的Pd/Ir比值变化较小,指示其多数矿石属于岩浆型,尽管岩浆活动弱,但以岩浆成矿作用为主。该硫化镍矿床的铂族元素特征参数(Pt/(Pt Pd)、(Pt Pd)/(Ru Ir Os)、Pd/Ir及Cu/(Ni Cu)等)具有过渡特征,这与其处于过渡的构造环境、特殊的岩浆性质和复杂的成矿作用有关煎茶岭镍矿床成矿过程中有壳源物质的混染,整体上岩、矿石铂族元素含量较低,这与其岩浆熔离作用弱,PGE成矿作用不发育等因素有关     

云南中旬地区烂泥塘低温热液型Cu-Au矿床铂族元素(PGE)地球化学特征

采用ICP-MS分析方法研究烂泥塘浅成低温热液型Cu-Au矿床中黄铜矿铂族元素(PGE),结果显示黄铜矿的∑PCE较低,其值为5.46×109～19.0×10-9.原始地幔标准化PGE配分模式呈Ru、Pd相对于Ir、Pt富集的趋势.Pd/Ir、Ru/Ir、Pt/Ru、Pd/Pt比值分别变化在2.35～21.9、15.6～42.3、0.02～0.20和4.83～21.8之间.除Pt/Ru比值低于原始地幔外,其他比值均高于原始地幔,这表明黄铜矿的Ir、Ru、Pt和Pd之间发生了分异.黄铜矿中相对高的Ru和Pd含量可能是热液流体对早期矿化斑岩选择淋滤的结果.     

云南中甸地区烂泥塘低温热液型Cu-Au矿床铂族元素(PGE)地球化学特征

采用ICP-MS分析方法研究烂泥塘浅成低温热液型Cu-Au矿床中黄铜矿铂族元素(PGE),结果显示黄铜矿的∑PGE较低,其值为5.46×10-9～19.0×10-9。原始地幔标准化PGE配分模式呈Ru、Pd相对于Ir、Pt富集的趋势。Pd/Ir、Ru/Ir、Pt/Ru、Pd/Pt比值分别变化在2.35～21.9、15.6～42.3、0.02～0.20和4.83～21.8之间。除Pt/Ru比值低于原始地幔外,其他比值均高于原始地幔,这表明黄铜矿的Ir、Ru、Pt和Pd之间发生了分异。黄铜矿中相对高的Ru和Pd含量可能是热液流体对早期矿化斑岩选择淋滤的结果。     

岩石样品中低含量铂族元素和锇同位素比值的高精度测量方法

铂族元素（Os,Ir,Pt,Ru,Rh,Pd)具有强亲铁性和强亲铜性，为一组地球化学性质相近的相容元素，铂族元素包含两个同位素衰变体系（^190Pt-^186Os和^187Re-^187Os)。近年来，铂族元素和Re-Os同位素在研究各类不同地持作用过程中，尤其是在地幔岩石的研究中，作用独特，效果显著。由于地幔岩石的铂族元素含量较低，因此高精度，高灵敏度的分析测试方法的研究就显得十分重要。以往的分析方法（如常规的ICP－MS和中子活化分析方法），对含10^-9-10^012级低含量铂族元素的产品分析精度一般较差（＞15％－100％）。所采用的分析流程通常也无法同时获得样品的铂族元素含量和Os同位素比值。本文采用新的熔样方法（HAP－S高温高压釜酸溶法），新的化学流程（溶剂萃取和阴离子交换树脂柱）和新的分析仪器（多接收等离子体质谱MC－ICPMS和负离子热电离质谱N－TIMS）。用同位素稀释法对低含量地幔橄榄岩样品同时测定的铂族元素含量和Os同位素比值，获得了高精度的分析结果。对所分析的地橄榄样品中的铂族元素分配曲线和Os同位素组成的地质意义进行了初步探讨。     

A Comprehensive Method for Precise Determination of Re,Os, Ir,Ru, Pt,Pd Concentrations and Os Isotopic Compositions in Geological Samples

A comprehensive method for the precise determination of Re, Os, Ir, Ru, Pt and Pd concentrations as well as Os isotopic compositions in geological samples is presented. Samples were digested by the Carius tube method, and the Os was extracted by conventional CCl₄ method. The Re, Ir, Ru, Pt and Pd were first subgroup separated from the matrix elements into Re‐Ru, Ir‐Pt and Pd by a 2‐ml anion exchange column. Subsequently, the Re‐Ru was further purified by a secondary 0.25 ml anion exchange column or by microdistillation of Ru using CrO₃‐H₂SO₄ as an oxidant followed by a secondary 0.25 ml anion exchange separation of Re. The Pd and Ir‐Pt were further successively purified by an Eichrom‐LN column to completely remove Zr and Hf, respectively. Rhenium, Ir, Ru, Pt and Pd were individually measured by multi‐collector inductively coupled plasma‐mass spectrometry (MC‐ICP‐MS), except for Ru after microdistillation purification was analysed by negative‐thermal ionisation mass spectrometry (N‐TIMS). The analytical results for peridotite reference material WPR‐1 agree well with the previously published data. Finally, several mafic rock reference materials including TDB‐1, WGB‐1, BHVO‐2, BCR‐2, BIR‐1a and DNC‐1a were analysed for Re‐Os isotopes and platinum‐group element concentrations to test their suitability for certification.     

Platinum-group element geochemistry of peridotite xenoliths from the Sierra Nevada and the Basin and Range, California

The nature of PGE-Re (PGE = Pt, Pd, Os, Ir, Ru) behavior in subcontinental lithospheric mantle was investigated using new, high precision PGE-Re abundance measurements and previously published Re-Os isotopic analyses of peridotite xenoliths from the Sierra Nevada and Mojave Province, California. Ru/Ir ratios and Ir concentrations are constant over a wide range in S content and major-element fertility indices (e.g., Mg/(Mg+Fe)), indicating that Ru and Ir are not only compatible during partial melting, but also that their partitioning behaviors may not be controlled entirely by sulfide. Pt/Ir, Pd/Ir, Os/Ir, and Re/Ir ratios range from slightly superchondritic to distinctly subchondritic for all xenoliths except for one anomalous sample (1026V), which is characterized by radiogenic ¹⁸⁷Os/¹⁸⁸Os, low Re/Os ratio, and large enrichments in Cu, Os, Pt, Pd, and S relative to Ir (COPPS metasomatism). Assuming chondritic initial relative abundances, the magnitudes of some of the depletions in Pt, Pd, Os, and Re relative to Ir and Ru require incompatible behavior or substantial secondary loss. In detail, some samples, which are otherwise characterized by fertile major-element indices, exhibit low S contents and subchondritic Os/Ir and Pd/Ir ratios, indicating that depletions in Pd and Os relative to Ir are not simple functions of the degree of melting as inferred from major elements. Possible mechanisms for depleting Pt, Pd, Os, and Re relative to Ir and Ru include partitioning into chromian spinels and alloys, partitioning between sulfide and sulfide liquids, mobilization by aqueous fluids, or secondary loss associated with late-stage sulfide breakdown. However, it is not possible to explain all of the depletions in Pt, Pd, Os, and Re by any single mechanism.The preferential enrichment in Os over Re and Ir in sample 1026V is somewhat paradoxical because this sample’s radiogenic ¹⁸⁷Os/¹⁸⁸Os requires a metasomatic agent, originating from a source with a high time-integrated Re/Os ratio. The abundant garnet websterite xenoliths may be a suitable source because they have high Re/Os ratios, radiogenic Os, and abundant garnet, which may sequester Re over Os during partial melting. However, their extremely low Os contents require the processing of large amounts of garnet websterite to concentrate enough Os into the metasomatic sulfides needed to enrich sample 1026V in Os. The homogeneity in ¹⁸⁷Os/¹⁸⁸Os ratio in the remaining xenoliths suggest that their Os isotopic compositions were not significantly affected by PGE metasomatism. The singular nature of 1026V’s composition emphasizes the rarity of COPPS metasomatism.     

Abundances of Sulfur,Selenium, Tellurium,Rhenium and Platinum‐Group Elements in Eighteen Reference Materials by Isotope Dilution Sector‐Field ICP‐MS and Negative TIMS

Geological reference materials (RMs) with variable compositions and NIST SRM 612 were analysed by isotope dilution mass spectrometry for bulk rock concentrations of chalcogen elements (sulfur, selenium and tellurium), rhenium and platinum‐group elements (PGEs: Ru, Pd, Os, Ir and Pt), including the isotope amount ratios of ¹⁸⁷Os/¹⁸⁸Os. All concentrations were obtained from the same aliquot after HCl‐HNO₃ digestion in a high pressure asher at 320 °C. Concentrations were determined after chemical separation by negative TIMS, ICP‐MS and hydride generation ICP‐MS (Se, Te). As in previous studies, concentrations of the PGEs in most RMs were found to be highly variable, which may be ascribed to sample heterogeneity at the < 1 g level. In contrast, S, Se and Te displayed good precision (RSD < 5%) in most RMs, suggesting that part of the PGE budget is controlled by different phases, compared with the chalcogen budget. The method may minimise losses of volatile chalcogens during the closed‐system digestion and indicates the different extent of heterogeneity of chalcogens, Re and PGEs in the same sample aliquot. OKUM, SCo‐1, MRG‐1, DR‐N and MAG‐1 are useful RMs for the chalcogens. NIST SRM 612 displays homogenous distribution of S, Se, Te, Pt and Pd in 30 mg aliquots, in contrast with micro‐scale heterogeneity of Se, Pd and Pt.     

Chemical evolution of metal in refractory inclusions in CV3 chondrites

Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) was used to measure distributions of the siderophile elements V, Fe, Co, Ni, Mo, Ru, Rh, Pd, W, Re, Os, Ir, Pt, and Au in Fremdlinge with a spatial resolution of 15 to 25 μm. A sulfide vein in a refractory inclusion in Allende (CV3-oxidized) is enriched in Rh, Ru, and Os with no detectable Pd, Re, Ir, or Pt, indicating that Rh, Ru, and Os were redistributed by sulfidation of the inclusion, causing fractionation of Re/Os and other siderophile element ratios in Allende CAIs. Fremdlinge in compact Type-A inclusions from Efremovka (CV3-reduced) exhibit subsolidus exsolution into kamacite and taenite and minimal secondary formation of V-magnetite and schreibersite. Siderophile element partitioning between taenite and kamacite is similar to that observed previously in iron meteorites, while preferential incorporation of the light PGEs (Ru, Rh, Pd) relative to Re, Os, Ir, and Pt by schreibersite was observed. Fremdling EM2 (CAI Ef2) has an outer rim of P-free metal that preserves the PGE signature of schreibersite, indicating that EM2 originally had a phosphide rim and lost P to the surrounding inclusion during secondary processing. Most Fremdlinge have chondrite-normalized refractory PGE patterns that are unfractionated, with PGE abundances derived from a small range of condensation temperatures, ∼1480 to 1468 K at P_tot = 10⁻³ bar. Some Fremdlinge from the same CAI exhibit sloping PGE abundance patterns and Re/Os ratios up to 2 × CI that likely represent mixing of grains that condensed at various temperatures.     

Determination of Platinum‐Group Elements and Re‐Os Isotopes using ID‐ICP‐MS and N‐TIMS from a Single Digestion after Two‐Stage Column Separation

We report an improved procedure for the determination of the platinum‐group elements (PGE) and Re, and Os isotopes from a single sample aliquot by isotope dilution (ID) using inductively coupled plasma‐mass spectrometry (ICP‐MS) and negative thermal ionisation mass spectrometry (N‐TIMS), respectively. A two‐stage column method was used to purify PGE‐Re from their sample matrix and interfering elements (e.g., Mo, Zr and Hf) after Os had been separated by CCl₄ solvent extraction. The first column separation step used cation exchange resin (AG50W‐X8) to concentrate PGE‐Re and some potential interfering elements (e.g., Mo, Zr and Hf). In the second step, N‐benzoyl‐N‐phenylhydroxylamine (BPHA) extraction resin was used to separate PGE‐Re from the remaining interfering elements, which all remained strongly absorbed to the resin. The method was used to determine the PGE and rhenium, and Os isotope ratios in a range of geochemical reference materials (TDB‐1, WGB‐1, BHVO‐2 and UB‐N). The obtained results agree well with those previously published. This new method enables PGE‐Re abundances and Os isotopic ratios to be determined on the same sample digestion, and circumvents the problems created by sample heterogeneity when comparing PGE and Re‐Os isotope data.     

Highly siderophile elements in ureilites

The abundances of the highly siderophile elements (HSE) Ru, Pd, Re, Os, Ir, and Pt were determined by isotope dilution mass spectrometry for 22 ureilite bulk rock samples, including monomict, augite-bearing, and polymict lithologies. This report adds significantly to the quantity of available Pt and Pd abundances in ureilites, as these elements were rarely determined in previous neutron activation studies. The CI-normalized HSE abundance patterns of all ureilites analyzed here except ALHA 81101 show marked depletions in the more volatile Pd, with CI chondrite-normalized Pd/Os ratios (excluding ALHA 81101) averaging 0.19 ± 0.23 (2σ). This value is too low to be directly derived from any known chondrite group. Instead, the HSE bulk rock abundances and HSE interelement ratios in ureilites can be understood as physical mixtures of two end member compositions. One component, best represented by sample ALHA 78019, is characterized by superchondritic abundances of refractory HSE (RHSE—Ru, Re, Os, Ir, and Pt), but subchondritic Pd/RHSE, and is consistent with residual metal after extraction of a S-bearing metallic partial melt from carbonaceous chondrite-like precursor materials. The other component, best represented by sample ALHA 81101, is RHSE-poor and has HSE abundances in chondritic proportions. The genesis of the second component is unclear. It could represent regions within the ureilite parent body (UPB), in which metallic phases were completely molten and partially drained, or it might represent chondritic contamination that was added during disruption and brecciation of the UPB. Removal of carbon-rich melts does not seem to play an important role in ureilite petrogenesis. Removal of such melts would quickly deplete the ureilite precursors in Re/Os and As/Au, which is inconsistent with measured osmium isotope abundances, and also with literature As/Au data for the ureilites. Removal of ²⁶Al during silicate melting may have acted as a switch that turned off further metal extraction from ureilite source regions.     

锍镍试金富集-等离子体质谱法测定西太平洋富钴结壳中的铂族元素

根据西太平洋麦哲伦海山富钴板状结壳样品的成分特征，对常规的锍镍试金配方作了改进；酌情减少捕集剂羰基镍的加入量，可显著降低铂族元素的空白值。富集后的样品，采用电感耦合等离子体质谱测定铂族元素（PGE）。其中，Ru、Rh、Pd、Ir和Pt用常规外标法测定，^175Lu作内标；Os用同位素稀释法测定。用国家一级标准物质GBW07290和GBW07291作监控分析质量的参考样，结果满足要求。     

Platinum-group elements (PGE) and rhenium in marine sediments across the Cretaceous-Tertiary boundary: constraints on Re-PGE transport in the marine environment

The nature of Re-platinum-group element (PGE; Pt, Pd, Ir, Os, Ru) transport in the marine environment was investigated by means of marine sediments at and across the Cretaceous-Tertiary boundary (KTB) at two hemipelagic sites in Europe and two pelagic sites in the North and South Pacific. A traverse across the KTB in the South Pacific pelagic clay core found elevated levels of Re, Pt, Ir, Os, and Ru, each of which is approximately symmetrically distributed over a distance of ∼1.8 m across the KTB. The Re-PGE abundance patterns are fractionated from chondritic relative abundances: Ru, Pt, Pd, and Re contents are slightly subchondritic relative to Ir, and Os is depleted by ∼95% relative to chondritic Ir proportions. A similar depletion in Os (∼90%) was found in a sample of the pelagic KTB in the North Pacific, but it is enriched in Ru, Pt, Pd, and Re relative to Ir. The two hemipelagic KTB clays have near-chondritic abundance patterns. The ∼1.8-m-wide Re-PGE peak in the pelagic South Pacific section cannot be reconciled with the fallout of a single impactor, indicating that postdepositional redistribution has occurred. The elemental profiles appear to fit diffusion profiles, although bioturbation could have also played a role. If diffusion had occurred over ∼65 Ma, the effective diffusivities are ∼10⁻¹³ cm²/s, much smaller than that of soluble cations in pore waters (∼10⁻⁶ cm²/s). The coupling of Re and the PGEs during redistribution indicates that postdepositional processes did not significantly fractionate their relative abundances. If redistribution was caused by diffusion, then the effective diffusivities are the same. Fractionation of Os from Ir during the KTB interval must therefore have occurred during aqueous transport in the marine environment. Distinctly subchondritic Os/Ir ratios throughout the Cenozoic in the South Pacific core further suggest that fractionation of Os from Ir in the marine environment is a general process throughout geologic time because most of the inputs of Os and Ir into the ocean have Os/Ir ratios ≥1. Mass balance calculations show that Os and Re burial fluxes in pelagic sediments account for only a small fraction of the riverine Os (<10%) and Re (<0.1%) inputs into the oceans. In contrast, burial of Ir in pelagic sediments is similar to the riverine Ir input, indicating that pelagic sediments are a much larger repository for Ir than for Os and Re. If all of the missing Os and Re is assumed to reside in anoxic sediments in oceanic margins, the calculated burial fluxes in anoxic sediments are similar to observed burial fluxes. However, putting all of the missing Os and Re into estuarine sediments would require high concentrations to balance the riverine input and would also fail to explain the depletion of Os at pelagic KTB sites, where at most ∼25% of the K-T impactor’s Os could have passed through estuaries. If Os is preferentially sequestered in anoxic marine environments, it follows that the Os/Ir ratio of pelagic sediments should be sensitive to changes in the rates of anoxic sediment deposition. There is thus a clear fractionation of Os and Re from Ir in precipitation out of sea water in pelagic sections. Accordingly, it is inferred here that Re and Os are removed from sea water in anoxic marine depositional regimes.     

Determination of Platinum‐Group Elements in Geological Samples by Isotope Dilution‐Inductively Coupled Plasma‐Mass Spectrometry Combined with Sulfide Fire Assay Preconcentration

A method was developed for the determination of platinum‐group elements (PGE) in geological samples by isotope dilution‐inductively coupled plasma‐mass spectrometry combined with sulfide fire assay preconcentration. Samples were fused and PGE analytes were concentrated in sulfide buttons. The buttons were dissolved using HCl leaving PGE analytes in insoluble residues, which were digested in HNO₃ and simultaneously processed for the distillation of Os. The remaining solutions were further prepared for the purification of Ru, Rh, Pd, Ir and Pt using a tandem assembly of cation and Ln resin columns. The eluents were directly analysed by membrane desolvation‐ICP‐MS. Ruthenium, Pd, Os, Ir and Pt were determined by isotope dilution, whereas Rh was determined by conventional reference material calibration combined with ¹⁹³Ir as the internal standard element. The method was validated using a series of PGE reference materials, and the measurement data were consistent with the recommended and the literature values. The measurement precision was better than 10% RSD. The procedural blanks were 0.121 ng for Ru, 0.204 for Rh, 0.960 ng for Pd, 0.111 ng for Os, 0.045 ng for Ir and 0.661 ng for Pt, and the limits of detection (3s) were 0.011 ng g^?1 for Ru, 0.008 ng g^?1 for Rh, 0.045 ng g^?1 for Pd, 0.009 ng g^?1 for Os, 0.006 ng g^?1 for Ir and 0.016 ng g^?1 for Pt when a test portion mass of 10 g was used. This indicates that the proposed method can be used for the determination of trace amounts of PGE in geological samples.