Environmental geochemistry of an active Hg mine in Xunyang,Shaanxi Province,China

The Xunyang Hg mine (XMM) situated in Shaanxi Province is an active Hg mine in China. Gaseous elemental Hg (GEM) concentrations in ambient air were determined to evaluate its distribution pattern as a consequence of the active mining and retorting in the region. Total Hg (HgT) and methylmercury (MeHg) concentrations in riparian soil, sediment and rice grain samples (polished) as well as Hg speciation in surface water samples were measured to show local dispersion of Hg contamination. As expected, elevated concentrations of GEM were found, ranging from 7.4 to 410 ng m⁻³. High concentrations of HgT and MeHg were also obtained in riparian soils, ranged from 5.4 to 120 mg kg⁻¹ and 1.2 to 11 μg kg⁻¹, respectively. Concentrations of HgT and MeHg in sediment samples varied widely from 0.048 to 1600 mg kg⁻¹ and 1.0 to 39 μg kg⁻¹, respectively. Surface water samples showed elevated HgT concentrations, ranging from 6.2 to 23,500 ng L⁻¹, but low MeHg concentrations, ranging from 0.022 to 3.7 ng L⁻¹. Rice samples exhibited high concentrations of 50–200 μg kg⁻¹ in HgT and of 8.2–80 μg kg⁻¹ in MeHg. The spatial distribution patterns of Hg speciation in the local environmental compartments suggest that the XMM is the source of Hg contaminations in the study area.     

Irrigation produces elevated arsenic in the underlying groundwater of a semi-arid basin in Southwestern Idaho

The shallow aquifer beneath the Western Snake River Plain (Idaho, USA) exhibits widespread elevated arsenic concentrations (up to 120 μg L⁻¹). While semi-arid, crop irrigation has increased annual recharge to the aquifer from approximately 1 cm prior to a current rate of >50 cm year⁻¹. The highest aqueous arsenic concentrations are found in proximity to the water table (all values >50 μg L⁻¹ within 50 m) and concentrations decline with depth. Despite strong vertical redox stratification within the aquifer, spatial distribution of aqueous species indicates that redox processes are not primary drivers of arsenic mobilization. Arsenic release and transport occur under oxidizing conditions; groundwater wells containing dissolved arsenic at >50 μg L⁻¹ exhibit elevated concentrations of O₂ (average 4 mg L⁻¹) and NO₃ (average 8 mg L⁻¹) and low concentrations of dissolved Fe (<20 μg L⁻¹). Sequential extractions and spectroscopic analysis of surficial soils and sediments indicate solid phase arsenic is primarily arsenate and is present at elevated concentrations (4–45 mg kg⁻¹, average: 17 mg kg⁻¹) relative to global sedimentary abundances. The highest concentrations of easily mobilized arsenic (up to 7 mg kg⁻¹) are associated with surficial soils and sediments visibly stained with iron oxides. Batch leaching experiments on these materials using irrigation waters produce pore water arsenic concentrations approximating those observed in the shallow aquifer (up to 152 μg L⁻¹). While As:Cl aqueous phase relationships suggest minor evaporative enrichment, this appears to be a relic of the pre-irrigation environment. Collectively, these data indicate that infiltrating irrigation waters leach arsenic from surficial sediments to the underlying aquifer.     

Geochemical comparison of waters and stream sediments close to abandoned Sb-Au and As-Au mining areas,northern Portugal

Waters from abandoned Sb-Au mining areas have higher Sb (up to 2138 μg L⁻¹), As (up to 1252 μg L⁻¹) and lower Al, Zn, Li, Ni and Co concentrations than those of waters from the As-Au mining area of Banjas, which only contain up to 64 μg L⁻¹ As. In general, Sb occurs mainly as SbO₃⁻ and As H₂AsO₄⁻. In general, waters from old Sb-Au mining areas are contaminated in Sb, As, Al, Fe, Cd, Mn, Ni and NO₂⁻, whereas those from the abandoned As-Au mining area are contaminated in Al, Fe, Mn, Ni, Cd and rarely in NO₂⁻. Waters from the latter area, immediately downstream of mine dumps are also contaminated in As. In stream sediments from Sb-Au and As-Au mining areas, Sb (up to 5488 mg kg⁻¹) and As (up to 235 mg kg⁻¹) show a similar behaviour and are mainly associated with the residual fraction. In most stream sediments, the As and Sb are not associated with the oxidizable fraction, while Fe is associated with organic matter, indicating that sulphides (mainly arsenopyrite and pyrite) and sulphosalts containing those metalloids and metal are weathered. Arsenic and Sb are mainly associated with clay minerals (chlorite and mica; vermiculite in stream sediments from old Sb-Au mining areas) and probably also with insoluble Sb phases of stream sediments. In the most contaminated stream sediments, metalloids are also associated with Fe phases (hematite and goethite, and also lepidocrocite in stream sediments from Banjas). Moreover, the most contaminated stream sediments correspond to the most contaminated waters, reflecting the limited capacity of stream sediments to retain metals and metalloids.     

Particulate-associated potentially harmful elements in urban road dusts in Xi’an,China

Sixty five urban road dust samples were collected from different land use areas of ∼240 km² in Xi’an, China. The concentrations of Ag, As, Cr, Cu, Hg, Pb, Sb and Zn were determined to investigate potentially harmful element (PHE) contamination, distribution and possible sources. In addition, the concentrations in different size fractions were measured to assess their potential impact on human health. The highest concentrations were found in the fraction with particle diameters between 80 μm and 101 μm, the finest particles (<63 μm) were not the most important carriers for Ag, As, Cd, Cr, Cu, Hg, Pb and Zn. The percentages of these elements in particles with diameters less than 63 μm (PM₆₃) and less than 101 μm (PM₁₀₁) were in the range of 7–15%, and 30–55%, respectively. Three main factors influencing element distributions have been identified: (a) industrial activities; (b) prior agricultural land use; and (c) other activities commonly found in urban areas, such as traffic, coal combustion, waste dumping, and building construction/renovation. The highest concentrations were found in industrial areas for As (20 mg kg⁻¹), Cr (853 mg kg⁻¹), Cu (1071 mg kg⁻¹), Pb (3060 mg kg⁻¹) and Zn (2112 mg kg⁻¹), and in previous agricultural areas for Ag and Hg, indicating significant contributions from industrial activities and prior agricultural activities.     

Effects of anthropopressure and soil properties on the accumulation of polycyclic aromatic hydrocarbons in the upper layer of soils in selected regions of Poland

Fifty soil samples collected from agricultural land in four regions of Poland with different anthropopressure were analysed for their content of 16PAHs by GC/MS. The regions correspond to Polish administrative units (voievodeships): Podlaskie and Lubelskie are situated in the rural East part of the country and more industrialised Slaskie and Dolnoslaskie voievodeships – in the South-West part. Basic physicochemical properties as well as the content of selected potentially harmful metals (Pb and Zn) were included in the soil analysis. Overall accumulation of Σ16PAHs in the upper soil layer was within the range 73–1800 μg kg⁻¹ with a geometric mean (GM) of 252 μg kg⁻¹, while the mean benzo(a)pyrene (BaP) load was 20 μg kg⁻¹. This corresponds with data for other European countries. Carcinogenic compounds contributed nearly in 50% to the total PAHs loads. In uncontaminated rural regions the mean Σ16PAHs and BaP contents were 113–159 μg kg⁻¹ and 11–13 μg kg⁻¹, respectively. Regional conditions strongly influenced the accumulation of PAHs ?4-rings, which were highly dependent (over 95%) on local anthropopressure expressed as dust and 4PAHs emission indexes. Soil acidity was the main soil parameter related to the accumulation of higher molecular weight PAHs in soils. In more contaminated regions a significant link between soil OM and PAH loads was noted. The same regions were characterised by associations between PAHs and potentially harmful metals implying common sources of pollution. Those relationships were not observed in the uncontaminated part of the country. The lower molecular weight PAHs contributed to a smaller extent (about 20%) to the total PAHs content in soils, and were less affected by anthropogenic factors.     

Complexation of cadmium to sulfur and oxygen functional groups in an organic soil

Cadmium (Cd) is a toxic trace element and due to human activities soils and waters are contaminated by Cd both on a local and global scale. It is widely accepted that chemical interactions with functional groups of natural organic matter (NOM) is vital for the bioavailability and mobility of trace elements. In this study the binding strength of cadmium (Cd) to soil organic matter (SOM) was determined in an organic (49% organic C) soil as a function of reaction time, pH and Cd concentration. In experiments conducted at native Cd concentrations in soil (0.23 μg g⁻¹ dry soil), halides (Cl, Br) were used as competing ligands to functional groups in SOM. The concentration of Cd in the aqueous phase was determined by isotope-dilution (ID) inductively-coupled-plasma-mass-spectrometry (ICP-MS), and the activity of Cd²⁺ was calculated from the well-established Cd-halide constants. At higher Cd loading (500-54,000 μg g⁻¹), the Cd²⁺ activity was directly determined by an ion-selective electrode (ISE). On the basis of results from extended X-ray absorption fine structure (EXAFS) spectroscopy, a model with one thiolate group (RS⁻) was used to describe the complexation (Cd²⁺ + RS⁻ ? CdSR⁺; log K_CdSR) at native Cd concentrations. The concentration of thiols (RSH; 0.047 mol kg⁻¹ C) was independently determined by X-ray absorption near-edge structure (XANES) spectroscopy. Log K_CdSR values of 11.2-11.6 (pK_a for RSH = 9.96), determined in the pH range 3.1-4.6, compare favorably with stability constants for the association between Cd and well-defined thiolates like glutathione. In the concentration range 500-54,000 μg Cd g⁻¹, a model consisting of one thiolate and one carboxylate (RCOO⁻) gave the best fit to data, indicating an increasing role for RCOOH groups as RSH groups become saturated. The determined log K_CdOOCR of 3.2 (Cd²⁺ +  RCOO⁻ ? CdOOCR⁺; log K_CdOOCR; pK_a for RCOOH = 4.5) is in accordance with stability constants determined for the association between Cd and well-defined carboxylates. Given a concentration of reduced sulfur groups of 0.2% or higher in NOM, we conclude that the complexation to organic RSH groups may control the speciation of Cd in soils, and most likely also in surface waters, with a total concentration less than 5 mg Cd g⁻¹ organic C.     

Use of biomarkers indices in a sediment core to evaluate potential pollution sources in a subtropical reservoir in Brazil

The presence of PAHs, n-alkanes, pristane, and phytanes in core sediment from the Vossoroca reservoir (Parana, southern Brazil) was investigated. The total concentration of the 16 PAHs varied from 15.5 to 1646 μg kg⁻¹. Naphthalene was present in all layers (3.34–74.0 μg kg⁻¹). The most abundant and dominant n-alkanes were n-C₁₅ and n-C₃₆, with average concentrations of 198.1 ± 46.8 and 522.9 ± 167.7 μg kg⁻¹, respectively. Lighter n-alkanes were distributed more evenly through the layers and showed less variation, specially n-C₉, n-C₁₂, and n-C₁₈, with average concentrations of 14.6 ± 3.0, 31.6 ± 1.9, and 95.0 ± 5.2 μg kg⁻¹, respectively; heavier n-alkanes were more unevenly distributed.     

Enrichment of metals in soils subjected to different land uses in a typical Mediterranean environment (Murcia City, southeast Spain)

Industrialization, urbanization, and agricultural practices are 3 of the most important sources of metal accumulations in soils. Concentrations of Cr, Mn, Ni, Cu, Pb, Zn and Cd were determined in surface soils collected under different land uses, including urban (UR), industrial (IN-1 and IN-2), agricultural (AG), abandoned unused (AB), and natural (NA) sites to examine the influence of anthropogenic activities on metals in soils formed in a typical Mediterranean environment. The highest concentrations of Cr, Cd, and Pb observed in the NW industrial area (IN-2) were 63.7, 3.34 and 2330 mg metal kg⁻¹ soil, for each metal, respectively. The SW industrial area (IN-1) contained the highest Zn content at 135 mg kg⁻¹. However, soils with the highest concentrations of Ni and Cu were located in AG sites at 30.9 and 64.9 mg kg⁻¹ soil, respectively. Sampling locations with the highest concentrations of Mn were identified in AB sites. Using the concentrations of metals at the NA sites as the baseline levels, soils collected from all other land uses in the study area exhibited significantly higher total contents of Zn, Mn, Cr and Ni. Metal enrichment was attributed to fertilizer and pesticide applications, industrial activities, and metal deposition from a high volume of vehicular traffic (for Pb and Cd). High concentrations of Mn in some samples were attributed to parent materials. The study demonstrated that anthropogenic activities associated with various land uses contribute to metal accumulation in soils and indicated a need to closely monitor land management practices to reduce human and ecological risks from environmental pollution.     

Landscape scale controls on the vascular plant component of dissolved organic carbon across a freshwater delta

Lignin phenol concentrations and compositions were determined on dissolved organic carbon (DOC) extracts (XAD resins) within the Sacramento-San Joaquin River Delta (the Delta), the tidal freshwater portion of the San Francisco Bay Estuary, located in central California, USA. Fourteen stations were sampled, including the following habitats and land-use types: wetland, riverine, channelized waterway, open water, and island drains. Stations were sampled approximately seasonally from December, 1999 through May, 2001. DOC concentrations ranged from 1.3 mg L⁻¹ within the Sacramento River to 39.9 mg L⁻¹ at the outfall from an island drain (median 3.0 mg L⁻¹), while lignin concentrations ranged from 3.0 μg L⁻¹ within the Sacramento River to 111 μg L⁻¹ at the outfall from an island drain (median 11.6 μg L⁻¹). Both DOC and lignin concentrations varied significantly among habitat/land-use types and among sampling stations. Carbon-normalized lignin yields ranged from 0.07 mg (100 mg OC)⁻¹ at an island drain to 0.84 mg (100 mg OC)⁻¹ for a wetland (median 0.36 mg (100 mg OC)⁻¹), and also varied significantly among habitat/land-use types. A simple mass balance model indicated that the Delta acted as a source of lignin during late autumn through spring (10-83% increase) and a sink for lignin during summer and autumn (13-39% decrease). Endmember mixing models using S:V and C:V signatures of landscape scale features indicated strong temporal variation in sources of DOC export from the Delta, with riverine source signatures responsible for 50% of DOC in summer and winter, wetland signatures responsible for 40% of DOC in summer, winter, and late autumn, and island drains responsible for 40% of exported DOC in late autumn. A significant negative correlation was observed between carbon-normalized lignin yields and DOC bioavailability in two of the 14 sampling stations. This study is, to our knowledge, the first to describe organic vascular plant DOC sources at the level of localized landscape features, and is also the first to indicate a significant negative correlation between lignin and DOC bioavailability within environmental samples. Based upon observed trends: (1) Delta features exhibit significant spatial variability in organic chemical composition, and (2) localized Delta features appear to exert strong controls on terrigenous DOC as it passes through the Delta and is exported into the Pacific Ocean.     

Role of rhizosphere and soil properties for the phytomanagement of a salt marsh polluted by mining wastes

The goal of this study was to evaluate the soil properties and their modifications within the rhizosphere of spontaneous vegetation as key factors to assess the phytomanagement of a salt marsh polluted by mining wastes. A field survey was performed based on a plot sampling design. The results provided by the analyses of rhizospheric soil (pH, electrical conductivity (EC), organic carbon, total nitrogen, etc.) and metal(loid)s’ phytoavailability (assessed by EDTA) were discussed and related to plant metal uptake. The averages of pH and EC values of the bulk soil and rhizospheric samples were in the range of neutral to slightly alkaline (pH 7–8) to saline (>2 dS m^?1), respectively. Heavy metal and As concentrations (e.g. ~600 mg kg^?1 As, ~50 mg kg^?1 Cd, ~11,000 mg kg^?1 Pb) were higher in the rhizosphere for both total and EDTA-extractable fraction. Phragmites australis uptaked the highest concentrations in roots (e.g. ~66 mg kg^?1 As, ~1,770 mg kg^?1 Zn) but not in shoots, for which most of plant species showed low values for Zn (<300 mg kg^?1) but not for Cd (>0.5 mg kg^?1) or Pb (~20–40 mg kg^?1). Vegetation distribution in the studied salt marsh looked to be more affected by salinity than by metal pollution. The free availability of water for plants and the incoming nutrient-enriched effluents which flow through the salt marsh may have hindered the metal(loid)s’ phytotoxicity. The phytomanagement of these polluted areas employing the spontaneous vegetation is a good option in order to improve the ecological indicators and to prevent the transport of pollutants to nearby areas.     

Dissolved metals and associated constituents in abandoned coal-mine discharges,Pennsylvania, USA. Part 1: Constituent quantities and correlations

Complete hydrochemical data are rarely reported for coal-mine discharges (CMD). This report summarizes major and trace-element concentrations and loadings for CMD at 140 abandoned mines in the Anthracite and Bituminous Coalfields of Pennsylvania. Clean-sampling and low-level analytical methods were used in 1999 to collect data that could be useful to determine potential environmental effects, remediation strategies, and quantities of valuable constituents. A subset of 10 sites was resampled in 2003 to analyze both the CMD and associated ochreous precipitates; the hydrochemical data were similar in 2003 and 1999. In 1999, the flow at the 140 CMD sites ranged from 0.028 to 2210 L s⁻¹, with a median of 18.4 L s⁻¹. The pH ranged from 2.7 to 7.3; concentrations (range in mg/L) of dissolved (0.45-μm pore-size filter) SO₄ (34–2000), Fe (0.046–512), Mn (0.019–74), and Al (0.007–108) varied widely. Predominant metalloid elements were Si (2.7–31.3 mg L⁻¹), B (<1–260 μg L⁻¹), Ge (<0.01–0.57 μg L⁻¹), and As (<0.03–64 μg L⁻¹). The most abundant trace metals, in order of median concentrations (range in μg/L), were Zn (0.6–10,000), Ni (2.6–3200), Co (0.27–3100), Ti (0.65–28), Cu (0.4–190), Cr (<0.5–72), Pb (<0.05–11) and Cd (<0.01–16). Gold was detected at concentrations greater than 0.0005 μg L⁻¹ in 97% of the samples, with a maximum of 0.0175 μg L⁻¹. No samples had detectable concentrations of Hg, Os or Pt, and less than half of the samples had detectable Pd, Ag, Ru, Ta, Nb, Re or Sn. Predominant rare-earth elements, in order of median concentrations (range in μg/L), were Y (0.11–530), Ce (0.01–370), Sc (1.0–36), Nd (0.006–260), La (0.005–140), Gd (0.005–110), Dy (0.002–99) and Sm (<0.005–79). Although dissolved Fe was not correlated with pH, concentrations of Al, Mn, most trace metals, and rare earths were negatively correlated with pH, consistent with solubility or sorption controls. In contrast, As was positively correlated with pH.     

Streamwater chemistry in three contrasting monolithologic Czech catchments

Hydrochemical patterns resulting from differing bedrock geochemistry were ascertained by concurrent streamwater sampling in three small catchments, each underlain by geochemically contrasting silicate rock types in the western Czech Republic, Central Europe in 2001–2010. The catchments are situated 5–7 km apart in the Slavkov Forest and are occupied by Norway spruce (Picea abies) plantations. They have similar altitude, area, topography, mean annual air temperature, and atmospheric deposition fluxes. The amount of base cations oxides (Ca + Mg + Na + K) is markedly different among the three studied rocks (leucogranite 8%, amphibolite 22%, serpentinite 36%). The leucogranite contains a very small amount of MgO, while the serpentinite contains extremely large amounts of MgO. The amphibolite contains an intermediate amount of MgO and elevated CaO. The Lysina, on leucogranite, exhibited very small concentrations of Mg (median 0.4 mg L⁻¹) in streamwater; Pluh?v Bor, on serpentinite, contained extremely high concentrations of streamwater Mg (18 mg L⁻¹). Streamwater in the Na Zeleném catchment, on amphibolite, contained an intermediate amount of Mg and an elevated Ca. Very low pH (4.2), negative alkalinity (−60 μeq L⁻¹) and high inorganic monomeric Al concentrations (0.3 mg L⁻¹) were found in the stream draining leucogranite. Serpentinite streamwater exhibited the highest pH (7.6), alkalinity (+940 μeq L⁻¹) and Ni concentrations (100 μg L⁻¹). Aquatic chemistry reflected the composition of the underlying rocks within the studied catchments. Contrasting streamwater compositions of the studied catchments were generated according to the MAGIC model simulations mainly by differences in chemical weathering rates of base cations (65 meq m⁻² a⁻¹ at Lysina, 198 meq m⁻² a⁻¹ at Na Zeleném, and 241 meq m⁻² a⁻¹ at Pluh?v Bor).     

Sorption of lead by phlogopite-rich mine tailings

The Pb sorption capacity of apatite ore mine tailings and its potential to act as a remediation agent in a Pb polluted areas were investigated. The tailings, originating from the Siilinjärvi carbonatite complex in Finland, consist mainly of phlogopite and calcite accompanied by apatite residues. The ability of the tailings to retain Pb from an aqueous solution was investigated using an isotherm technique. Furthermore, in a 3-month incubation experiment, uncontaminated mineral soil was amended with untreated tailings and with tailings artificially weathered with acid to increase the quantity of Al and Fe (hydr)oxides. Tailings of two particle-sizes (∅ > 0.2 mm and ∅ < 0.2 mm) somewhat differing in their mineralogical composition were investigated as separate amendments. All tailings materials were added to the soil in two dosages (5 g and 10 g of tailings per 125 g of soil). Following incubation, tailings-induced changes in the Pb sorption capacity of the soil were investigated with the isotherm technique. Finally, to investigate the distribution of sorbed Pb among various chemical pools, the soil samples amended with tailings were contaminated with Pb and then subjected to sequential fractionation analysis. The results revealed efficient removal of Pb from an aqueous solution by the tailings, presumably through precipitation and surface complexation mechanisms. Amending the soil with the tailings increased the mass-based maximum Pb sorption capacity from 10.8 mg kg⁻¹ of the control soil to 14–20.5 mg kg⁻¹ for the untreated tailings and to 32.1–72.1 mg kg⁻¹ for the acid-treated material. The tailings transferred Pb from the exchangeable pool to the non-extracted one and thereby substantially decreased its bioavailability. The material with a particle diameter of less than 0.2 mm had a higher mass-based Pb sorption capacity than the large-sized material. The results suggest that the tailings may potentially serve as an immobilizing agent in polluted areas.     

Alteration of As-bearing phases in a small watershed located on a high grade arsenic-geochemical anomaly (French Massif Central)

At a watershed scale, sediments and soil weathering exerts a control on solid and dissolved transport of trace elements in surface waters and it can be considered as a source of pollution. The studied subwatershed (1.5 km²) was located on an As-geochemical anomaly. The studied soil profile showed a significant decrease of As content from 1500 mg kg⁻¹ in the 135–165 cm deepest soil layer to 385 mg kg⁻¹ in the upper 0–5 cm soil layer. Directly in the stream, suspended matter and the <63 μm fraction of bed sediments had As concentrations greater than 400 mg kg⁻¹. In all these solid fractions, the main representative As-bearing phases were determined at two different observation scales: bulk analyses using X-ray absorption structure spectroscopy (XAS) and microanalyses using scanning electron microscope (SEM) and associated electron probe microanalyses (EPMA), as well as micro-Raman spectroscopy and synchrotron-based micro-scanning X-ray diffraction (μSXRD) characterization. Three main As-bearing phases were identified: (i) arsenates (mostly pharmacosiderite), the most concentrated phases As in both the coherent weathered bedrock and the 135–165 cm soil layer but not observed in the river solid fraction, (ii) Fe-oxyhydroxides with in situ As content up to 15.4 wt.% in the deepest soil layer, and (iii) aluminosilicates, the least concentrated As carriers. The mineralogical evolution of As-bearing phases in the soil profile, coupled with the decrease of bulk As content, may be related to pedogenesis processes, suggesting an evolution of arsenates into As-rich Fe-oxyhydroxides. Therefore, weathering and mineralogical evolution of these As-rich phases may release As to surface waters.     

The universal ratio of boron to chlorinity for the North Pacific and North Atlantic oceans

We report seawater boron concentration (mg kg⁻¹) and chlorinity (‰) values measured in seawater samples (n = 139) collected at various depths in the North Pacific and North Atlantic oceans and the East/Japan Sea (located in the western temperate North Pacific). Our results indicate that variations in seawater boron concentration are strongly coupled to variations in chlorinity (and salinity), yielding a mean boron to chlorinity ratio of 0.2414 ± 0.0009 mg kg⁻¹ ‰⁻¹ (boron to salinity ratio = 0.1336 ± 0.0005 mg kg⁻¹ ‰⁻¹). This ratio was surprisingly universal throughout the water column in the three marine basins and across widely different ocean surface regimes, but differs from the generally accepted ratio of 0.232 ± 0.005 mg kg⁻¹ ‰⁻¹ determined by Uppström (1974), which was based on only 20 measurements at four sites in the tropical Pacific Ocean. In converting total alkalinity to carbonate alkalinity (and vice versa) for thermodynamic calculations, the difference between these two ratios leads to a difference of 5 μmol kg⁻¹ in estimates for ocean surface waters, where the contribution of borate to total alkalinity is typically greatest. We suggest the use of the new boron to chlorinity ratio for predicting seawater boron concentrations using chlorinity (or salinity) data.     

Mobility of metals in nickel mine spoil materials

An understanding of the biogeochemical behaviour of metals in mine spoil materials is a prerequisite to rehabilitate Ni mining sites. The objective of this study was to characterize the fate of metals in different Ni ore spoil materials as influenced by hydrological conditions and fertilisation practices. In tropical ultramafic complexes, the different stages of lateritic weathering lead to two types of ores, and therefore, to two spoil types. They are mainly either a clay-rich saprolite, so-called “garnierite”, enriched in phyllosilicates, or a limonitic material, enriched in Fe oxides. Lysimeter columns were designed to monitor leaching waters through both spoil materials. The garnieritic spoil released higher concentrations of Mg (mean = 2.25 mg L⁻¹), Ni (0.39 mg L⁻¹) and Cr (1.19 mg L⁻¹) than the limonitic spoil (Mg = 0.5 mg L⁻¹; Ni = 0.03 mg L⁻¹ and Cr = 0.25 mg L⁻¹). Chromium was mainly in an anionic form in leaching solutions. As exchangeable pools of Cr(VI) in limonite (980 mg kg⁻¹ of KH₂PO₄-extractable Cr) are considerable its release in water may still occur in the case of a pH increase. In mixed spoil, metal concentrations were almost as low as in the limonitic one. The effect of mineral-N fertilisation was a strong release of cations (Ni, Mg) into the leachate. Phosphate amendment did not affect the soil solution composition under experimental conditions.     

Arsenic levels in human hair,Kandal Province,Cambodia: The influences of groundwater arsenic,consumption period,age and gender

This study focused on the analysis of As levels in human hair samples collected from six villages in the Kandal Province of Cambodia. Of interest were the influence of, and interactions among, certain factors affecting As intake into the human body: As concentrations in groundwater, period of groundwater consumption, age and gender. The results revealed As levels in human hair ranging from 0.06 to 30 μg g⁻¹ with median and arithmetic mean values of 0.61 and 3.20 μg g⁻¹ (n = 68), respectively. Furthermore, a linear relationship was found between As concentrations in human hair and in the local groundwater. Arsenic (III) is the dominant species in Kandal groundwater, constituting in most cases at least 60% of the total As. Arsenic concentration ranged from 5 to 1543 μg L⁻¹, with the median value 348 μg L⁻¹ and arithmetic mean 454 μg L⁻¹. In large rural, poor areas holding most of Kandal’s 1.1 million people, up to 2 in 1000 people are believed to be at risk of cancer through the As-enriched water they drink. A toxicity risk assessment provides a hazard quotient (HQ) equaling 5.12, also a clear indication of non-carcinogenic exposure risk. On the authors’ visit to Kampong Kong commune, Kandal Province, cases of arsenicosis were diagnosed in patients as a result of drinking As-enriched groundwater.     

50-year record and solid state speciation of mercury in natural and contaminated reservoir sediment

Contaminated fluvial sediments represent both temporary sinks for river-borne pollutants and potential sources in case of natural and/or anthropogenic resuspension. Reservoir lakes play a very important role in sediment dynamics of watersheds and may offer great opportunities to study historical records of river-borne particles and associated elements transported in the past. The fate and potential environmental impact of Hg depends on its abundance, its carrier phases and its chemical speciation. Historical Hg records and solid state Hg speciation were compared in sediments from two contrasting reservoirs of the Lot River (France) upstream and downstream from a major polymetallic pollution (e.g. Cd, Zn) source. Natural (geochemical background) and anthropogenic Hg concentrations and their relationships with predominant carrier phases were determined. The results reveal important historical Hg contamination (up to 35 mg kg⁻¹) of the downstream sediment, reflecting the historical evolution of industrial activity at the point source, i.e. former coal mining, Zn ore treatment and post-industrial remediation work. Single chemical extractions (ascorbate, H₂O₂, KOH) suggest that at both sites most (∼75%) of the Hg is bound to organic and/or reactive sulphide phases. Organo-chelated (KOH-extracted) Hg, representing an important fraction in the uncontaminated sediment, shows similar concentrations (∼0.02 mg kg⁻¹) at both sites and may be mainly attributed to natural inputs and/or processes. Although, total Hg concentrations in recent surface sediments at both sites are still very different, similar mono-methylmercury concentrations (up to 4 μg kg⁻¹) and vertical distributions were observed, suggesting comparable methylation-demethylation processes. High mono-methylmercury concentrations (4–15 μg kg⁻¹) in 10–40 a-old, sulphide-rich, contaminated sediment suggest long-term persistence of mono-methylmercury. Beyond historical records of total concentrations, the studied reservoir sediments provided new insights in solid state speciation and carrier phases of natural and anthropogenic Hg. In case of sediment resuspension, the major part of the Hg historically stored in the Lot River sediments will be accessible to biogeochemical recycling in the downstream fluvial-estuarine environment.     

Potentially harmful elements in rice paddy fields in mercury hot spots in Guizhou, China

Levels of the chalcophile metals Hg, Pb, Cd, Cu and Zn and the metalloid As in soils from rice paddy fields were assessed in two regions impacted by different industrial activities in Guizhou province, China. The two study areas (Wanshan and Qingzhen) have previously received attention in the international literature due to heavy Hg pollution, though levels of other potentially harmful elements have not previously been reported. The regions were selected as representing two important, but categorically different metal(loid) contaminated areas in China: Wanshan has been a major region for Hg production while Qingzhen is an important region for a large range of various heavy industries based on coal as an energy source.Within a limited distance of the Hg mine tailings in Wanshan the rice paddy fields are heavily contaminated by Hg (median concentration 25 μg g⁻¹, maximum 119 μg g⁻¹) and moderately contaminated by Zn and Cd (median concentrations of 86 and 0.9 μg g⁻¹, respectively). Zinc and Cd levels correlate well with Hg contamination, which indicates a similar source and mechanism of transport and accumulation. Other studies have concluded that the main sources of Hg contamination in Wanshan are the numerous Hg mine tailings. This is likely as these metals are all geochemically associated with the mineral cinnabar (HgS). The other chalcophile elements (Pb, Cu and As) are nevertheless found at background levels only. In Qingzhen the soils were found to contain elevated levels of As and Hg (median concentrations of 38 and 0.3 μg g⁻¹, respectively). These are elements that are known to be more associated with coal and released during coal combustion.     

An occurrence of cadmiferous phosphorite soil concretions in Jamaica

Bauxite exploration drilling revealed the presence of phosphate minerals through the chemical and XRD analysis of recovered drill hole samples at Spitzbergen, in Manchester Parish, Jamaica. A subsequent pit led to the discovery of phosphorite concretions composed of hard competent masses of finely crystalline fluorapatite, with some minor crandallite. The phosphorite contains anomalously high levels of Zn (>5000 mg kg⁻¹), Cd (>1.1%), Ag (>20 mg kg⁻¹), Be (>80 mg kg⁻¹) and, to a lesser extent, U. Textural and geochemical evidence indicates that the phosphorite concretions were most likely formed by the replacement of limestone by secondary deposition proximal to fossil guano deposits, postulated to be Late Miocene or Pliocene sea-bird colonies. Mechanical dispersion of the phosphorite concretions through karst weathering processes has led to their wider spatial distribution than the original guano deposits. Subsequent weathering of the concretions and the admixture of their decomposition products into the bauxitic and Terra Rossa soils is postulated to be the cause of the widespread anomalous levels of Zn, Cd and Be in these soils in central Jamaica, and the elevated levels of P in the bauxite.