Crustal structure at the easternmost termination of the Variscan belt based on CELEBRATION 2000 and ALP 2002 data

The eastern margin of the Variscan belt in Europe comprises plate boundaries between continental blocks and terranes formed during different tectonic events. The crustal structure of that complicated area was studied using the data of the international refraction experiments CELEBRATION 2000 and ALP 2002. The seismic data were acquired along SW–NE oriented refraction and wide-angle reflection profiles CEL10 and ALP04 starting in the Eastern Alps, passing through the Moravo-Silesian zone of the Bohemian Massif and the Fore-Sudetic Monocline, and terminating in the TESZ in Poland. The data were interpreted by seismic tomographic inversion and by 2-D trial-and-error forward modelling of the P waves. Velocity models determine different types of the crust–mantle transition, reflecting variable crustal thickness and delimiting contacts of tectonic units in depth. In the Alpine area, few km thick LVZ with the Vp of 5.1 km s^− 1 dipping to the SW and outcropping at the surface represents the Molasse and Helvetic Flysch sediments overthrust by the Northern Calcareous Alps with higher velocities. In the Bohemian Massif, lower velocities in the range of 5.0–5.6 km s^− 1 down to a depth of 5 km might represent the SE termination of the Elbe Fault Zone. The Fore-Sudetic Monocline and the TESZ are covered by sediments with the velocities in the range of 3.6–5.5 km s^− 1 to the maximum depth of 15 km beneath the Mid-Polish Trough. The Moho in the Eastern Alps is dipping to the SW reaching the depth of 43–45 km. The lower crust at the eastern margin of the Bohemian Massif is characterized by elevated velocities and high Vp gradient, which seems to be a characteristic feature of the Moravo-Silesian. Slightly different properties in the Moravian and Silesian units might be attributed to varying distances of the profile from the Moldanubian Thrust front as well as a different type of contact of the Brunia with the Moldanubian and its northern root sector. The Moho beneath the Fore-Sudetic Monocline is the most pronounced and is interpreted as the first-order discontinuity at a depth of 30 km.     

Crustal structure of the northeastern margin of the Tibetan plateau from the Songpan-Ganzi terrane to the Ordos basin

The 1000-km-long Darlag–Lanzhou–Jingbian seismic refraction profile is located in the NE margin of the Tibetan plateau. This profile crosses the northern Songpan-Ganzi terrane, the Qinling-Qilian fold system, the Haiyuan arcuate tectonic region, and the stable Ordos basin. The P-wave and S-wave velocity structure and Poisson's ratios reveal many significant characteristics in the profile. The crustal thickness increases from northeast to southwest. The average crustal thickness observed increases from 42 km in the Ordos basin to 63 km in the Songpan-Ganzi terrane. The crust becomes obviously thicker south of the Haiyuan fault and beneath the West-Qinlin Shan. The crustal velocities have significant variations along the profile. The average P-wave velocities for the crystalline crust vary between 6.3 and 6.4 km/s. Beneath the Songpan-Ganzi terrane, West-Qinling Shan, and Haiyuan arcuate tectonic region P-wave velocities of 6.3 km/s are 0.15 km/s lower than the worldwide average of 6.45 km/s. North of the Kunlun fault, with exclusion of the Haiyuan arcuate tectonic region, the average P-wave velocity is 6.4 km/s and only 0.5 km/s lower than the worldwide average. A combination of the P-wave velocity and Poisson's ratio suggests that the crust is dominantly felsic in composition with an intermediate composition at the base. A mafic lower crust is absent in the NE margin of the Tibetan plateau from the Songpan-Ganzi terrane to the Ordos basin. There are low velocity zones in the West-Qinling Shan and the Haiyuan arcuate tectonic region. The low velocity zones have low S-wave velocities and high Poisson's ratios, so it is possible these zones are due to partial melting. The crust is divided into two layers, the upper and the lower crust, with crustal thickening mainly in the lower crust as the NE Tibetan plateau is approached. The results in the study show that the thickness of the lower crust increases from 22 to 38 km as the crustal thickness increases from 42 km in the Ordos basin to 63 km in the Songpan-Ganzi terrane south of the Kunlun fault. Both the Conrad discontinuity and Moho in the West-Qinling Shan and in the Haiyuan arcuate tectonic region are laminated interfaces, implying intense tectonic activity. The arcuate faults and large earthquakes in the Haiyuan arcuate tectonic region are the result of interaction between the Tibetan plateau and the Sino–Korean and Gobi Ala Shan platforms.     

Geochemical evidence concerning sources and petrologic evolution of Faial Island,Central Azores

Volcanic rocks that make up Faial Island, Central Azores, consist of four volcano-stratigraphic units, with ages between 730 ka and the present. Lavas range from alkali basalts to trachyandesites and belong to the alkaline-sodic series. The oldest unit is the Ribeirinha Volcanic Complex, generally characterized by low MgO contents. The Cedros Volcanic Complex is composed of basalts to benmoreites with low MgO contents. The Almoxarife Formation represents fissure flows, containing MgO contents similar to to slightly higher than those of the underlying Cedros Volcanic Complex. The youngest unit, the Capelo Formation, consists of mafic rocks with MgO values higher than those of the other units. Bulk-rock major and trace element trends suggest that differentiation of the three earliest units were dominated by fractional crystallization of plagioclase ± clinopyroxene ± olivine ± titanomagnetite. Capelo bulk-rock compositions are the most primitive, and are related to a period when volcanic activity was fed by deep magmatic chambers, and melts ascended more rapidly. Comparison among geochemical patterns of the trace elements suggests a strong similarity between the lavas from Faial and Pico islands. Corvo Island volcanism contrasts with the geochemistry of Faial and Pico lavas, reflecting its strong K and Rb depletion, and Th, U, Ta, Nb, La, and Ce enrichment. Absence of the Daly gap in the Faial volcanics is attributed to early crystallization of Ti-Fe oxides. The probable source of the Faial magma coincides with the MORB-FOZO array, which implies the presence of ancient recycled oceanic crust in the mantle source. Ratios of incompatible trace elements suggest the similarity of Corvo volcanic rocks with magmas derived from HIMU sources, whereas the Faial and Pico volcanic rocks could have been produced from sources very close to EMII-type OIB.     

Crustal deformation in the Central Ionian Islands (Greece): Results from DGPS and DInSAR analyses (1995–2006)

Ground deformation studies based on Differential GPS (DGPS) and Differential Interferometric SAR (DInSAR) analyses have been conducted in the seismically active area of the Central Ionian Islands. Local GPS networks were installed in Cephallonia (2001) and Zakynthos (2005). The Cephallonian network has been remeasured five times and Zakynthos' once as of July 2006. The studies have yielded detailed information regarding both local and regional deformations that are occurring in the area.For Lefkas Island, DInSAR analysis (March to September 2003) revealed 56 mm of uplift in the central and western parts and is attributed to the August 2003 earthquake (M_w = 6.3) that occurred offshore to the west. Synthetic DInSAR modelling of the magnitude and extent of deformation is consistent with the seismologically deduced parameters for the ruptured segment along the Lefkas Transform Fault. Subsidence (< 28 mm) along the northern part of the island is attributed to local conditions unrelated to the earthquake. For Zakynthos Island, large-magnitude earthquakes that occurred offshore to the south in October 2005 and April 2006 most likely contributed to the observed deformation as deduced from DGPS measurements for an encompassing period (August 2005 to July 2006). The largest amount of horizontal deformation occurred in the south, where its western part moved in a W–NW direction, while the eastern part moved towards the NE, with magnitudes ranging from 15 to 26 mm. The southern part of the island uplifted a maximum of 65 mm whereas the north subsided from 12 to 28 mm.For Cephallonia Island, DInSAR analysis (1995 to 1998) indicated ground deformation up to 28 mm located in small sections of the island. Further interferometric analysis for the period 2003 to 2004, encompassing the occurrence of the Lefkas earthquake in August 2003, indicated 28 mm of uplift in the northern part, while during the next two years (2004 to 2005), further uplift of at least 56 mm had taken place at the western and northern part of the island.DGPS measurements for the period 2001 to 2006 revealed a clockwise rotation of the island with respect to a centrally located station on Aenos Mt. The horizontal component of deformation generally ranged from 6 to 34 mm, with the largest values at the western and northern parts of the island. Considering the vertical deformation, two periods are distinguished. The first one (2001 to 2003) is consistent with anticipated motions associated with the main geological and tectonic features of the island. The second one (2003 to 2006) has been tentatively attributed to dilatancy in which relatively small uplift (20–40 mm) occurred along the southern and southeastern parts of the island, while larger magnitudes (> 50 mm) happened at the western part (Paliki Peninsula). These large magnitudes of uplift over an extended area (> 50 km), in conjunction with an accelerated Benioff strain determined from the analysis of the seismicity in the broader region, are consistent with dilatancy. This effect commenced some time after 2003 and is probably centered in the area between Zakynthos and Cephallonia. If this interpretation is correct, it may foreshadow the occurrence of a very strong earthquake(s) sometime during 2007 to 2008 in the above designated region.     

Crustal structure of mainland China from deep seismic sounding data

Since 1958, about ninety seismic refraction/wide angle reflection profiles, with a cumulative length of more than sixty thousand kilometers, have been completed in mainland China. We summarize the results in the form of (1) a new contour map of crustal thickness, (2) fourteen representative crustal seismic velocity–depth columns for various tectonic units, and, (3) a Pn velocity map. We found a north–south-trending belt with a strong lateral gradient in crustal thickness in central China. This belt divides China into an eastern region, with a crustal thickness of 30–45 km, and a western region, with a thickness of 45–75 km. The crust in these two regions has experienced different evolutionary processes, and currently lies within distinct tectonic stress fields. Our compilation finds that there is a high-velocity (7.1–7.4 km/s) layer in the lower crust of the stable Tarim basin and Ordos plateau. However, in young orogenic belts, including parts of eastern China, the Tianshan and the Tibetan plateau, this layer is often absent. One exception is southern Tibet, where the presence of a high-velocity layer is related to the northward injection of the cold Indian plate. This high-velocity layer is absent in northern Tibet. In orogenic belts, there usually is a low-velocity layer (LVL) in the crust, but in stable regions this layer seldom exists. The Pn velocities in eastern China generally range from 7.9 to 8.1 km/s and tend to be isotropic. Pn velocities in western China are more variable, ranging from 7.7 to 8.2 km/s, and may display azimuthal anisotropy.     

地震震源与灾害评估分析:中国四川2008年5月12日Ms 8.0汶川地震

汶川5月12日8.0级地震在构造上起因于印度板块与欧亚板块以每年约5 cm的速度聚敛,并因此而引起青藏高原的地壳物质向四川盆地及中国东南大陆运移.主震震源及余震活动集中于以龙门山为中轴的一条长约350 km、宽约100 km的地震活动带.震源深度一般分布丁地壳脆性-韧性转换边界以上约10～20 km区间的地壳震源层之中,属浅源构造地震.主要震源机制与龙门山构造运动方式密切相关,以其地壳厚度向西急剧加厚、重力梯度带、高波速比(Vp/Vs～2.2)等深部异常及逆冲断层兼具走滑性质的地质构造为特征.在震源辐射、路径传播和场地效应研究的基础上,分别计算并比较了岩石和土壤条件下的地震响应谱,特别强调了土壤条件下的场地放大效应;同时对与地震安全性有关的一些问题如地质灾害、地震频谱设计、地震早期预警系统及中、长期至短期地震预报等进行了探讨;特别提供了一个由加权平均计算、以岩石条件下震波衰减模式为基础的地震频谱设计参考实例.地震构造与动力学研究可融人工程地质与环境工程等学科发展.经历汶川地震考验的一些新近设计和建设的工程项目可为今后改进工程建筑规范与标准提供重要而有益的参考.地震预报是当今一大难题,但需探索研究,不可懈怠.地震减灾与预防足目前比较切合实际的安全举措.     

Local thickening of the Cascadia forearc crust and the origin of seismic reflectors in the uppermost mantle

Seismic reflection profiles from three different surveys of the Cascadia forearc are interpreted using P wave velocities and relocated hypocentres, which were both derived from the first arrival travel time inversion of wide-angle seismic data and local earthquakes. The subduction decollement, which is characterized beneath the continental shelf by a reflection of 0.5 s duration, can be traced landward into a large duplex structure in the lower forearc crust near southern Vancouver Island. Beneath Vancouver Island, the roof thrust of the duplex is revealed by a 5–12 km thick zone, identified previously as the E reflectors, and the floor thrust is defined by a short duration reflection from a < 2-km-thick interface at the top of the subducting plate. We show that another zone of reflectors exists east of Vancouver Island that is approximately 8 km thick, and identified as the D reflectors. These overlie the E reflectors; together the two zones define the landward part of the duplex. The combined zones reach depths as great as 50 km. The duplex structure extends for more than 120 km perpendicular to the margin, has an along-strike extent of 80 km, and at depths between 30 km and 50 km the duplex structure correlates with a region of anomalously deep seismicity, where velocities are less than 7000 m s^− 1. We suggest that these relatively low velocities indicate the presence of either crustal rocks from the oceanic plate that have been underplated to the continent or crustal rocks from the forearc that have been transported downward by subduction erosion. The absence of seismicity from within the E reflectors implies that they are significantly weaker than the overlying crust, and the reflectors may be a zone of active ductile shear. In contrast, seismicity in parts of the D reflectors can be interpreted to mean that ductile shearing no longer occurs in the landward part of the duplex. Merging of the D and E reflectors at 42–46 km depth creates reflectivity in the uppermost mantle with a vertical thickness of at least 15 km. We suggest that pervasive reflectivity in the upper mantle elsewhere beneath Puget Sound and the Strait of Georgia arises from similar shear zones.     

Seismotectonics of strike–slip earthquakes within the deep crust of southern Italy: Geometry, kinematics, stress field and crustal rheology of the Potenza 1990–1991 seismic sequences (Mmax 5.7)

We present a revision and a seismotectonic interpretation of deep crust strike–slip earthquake sequences that occurred in 1990–1991 in the Southern Apennines (Potenza area). The revision is motivated by: i) the striking similarity to a seismic sequence that occurred in 2002  140 km NNW, in an analogous tectonic context (Molise area), suggesting a common seismotectonic environment of regional importance; ii) the close proximity of such deep strike–slip seismicity with shallow extensional seismicity (Apennine area); and iii) the lack of knowledge about the mechanical properties of the crust that might justify the observed crustal seismicity. A comparison between the revised 1990–1991 earthquakes and the 2002 earthquakes, as well as the integration of seismological data with a rheological analysis offer new constraints on the regional seismotectonic context of crustal seismicity in the Southern Apennines. The seismological revision consists of a relocation of the aftershock sequences based on newly constrained velocity models. New focal mechanisms of the aftershocks are computed and the active state of stress is constrained via the use of a stress inversion technique. The relationships among the observed seismicity, the crustal structure of the Southern Apennines, and the rheological layering are analysed along a crustal section crossing southern Italy, by computing geotherms and two-mechanism (brittle frictional vs. ductile plastic strength) rheological profiles. The 1990–1991 seismicity is concentrated in a well-defined depth range (mostly between 15 and 23 km depths). This depth range corresponds to the upper pat of the middle crust underlying the Apulian sedimentary cover, in the footwall of the easternmost Apennine thrust system. The 3D distribution of the aftershocks, the fault kinematics, and the stress inversion indicate the activation of a right-lateral strike–slip fault striking N100°E under a stress field characterized by a sub-horizontal N142°-trending σ1 and a sub-horizontal N232°-trending σ3, very similar to the known stress field of the Gargano seismic zone in the Apulian foreland. The apparent anomalous depths of the earthquakes (> 15 km) and the confinement within a relatively narrow depth range are explained by the crustal rheology, which consists of a strong brittle layer at mid crustal depths sandwiched between two plastic horizons. This articulated rheological stratification is typical of the central part of the Southern Apennine crust, where the Apulian crust is overthrusted by Apennine units. Both the Potenza 1990–1991 and the Molise 2002 seismic sequences can be interpreted to be due to crustal E–W fault zones within the Apulian crust inherited from previous tectonic phases and overthrusted by Apennine units during the Late Pliocene–Middle Pleistocene. The present strike–slip tectonic regime reactivated these fault zones and caused them to move with an uneven mechanical behaviour; brittle seismogenic faulting is confined to the strong brittle part of the middle crust. This strong brittle layer might also act as a stress guide able to laterally transmit the deviatoric stresses responsible for the strike–slip regime in the Apulian crust and may explain the close proximity (nearly overlapping) of the strike–slip and normal faulting regimes in the Southern Apennines. From a methodological point of view, it seems that rather simple two-mechanism rheological profiles, though affected by uncertainties, are still a useful tool for estimating the rheological properties and likely seismogenic behaviour of the crust.     

P-wave velocity structure under the Changbaishan volcanic region, NE China, from wide-angle reflection and refraction data

We present velocity models determined by inverting refracted and reflected arrivals along two active source lines in the Changbaishan volcanic region, NE China. We resolve a prominent low-velocity zone (LVZ) in the crust, with velocities as low as 5.4 km/s. Away from the LVZ, the velocity gradients in the crust are relatively smooth, with average P-wave velocities of about 6.0–6.5 km/s. The Moho is at about 35 km depth, thickening to about 40 km under the Tianchi volcano, and thinning to about 30 km under the LVZ. The LVZ is located about 30–60 km to the north of the summit of the Tianchi volcano (the most recently active volcano in the region), is about 30–75 km in north–south extent, is at most 35 km in east–west extent, and is in the depth range of about 10–25 km below the surface. We use these results to constrain receiver function inversions, and show that the receiver functions in the region are compatible with our findings. With these data alone, the significance of the LVZ in non-unique, although we do not see any evidence to support the presence of partial melt in the crust, and favor the interpretation that the LVZ indicates a residual crustal magma chamber.     

Upper and middle crustal deformation of an arc–arc collision across Hokkaido, Japan, inferred from seismic refraction/wide-angle reflection experiments

The Hidaka Collision Zone (HCZ), central Hokkaido, Japan, is a good target for studies of crustal evolution and deformation processes associated with an arc–arc collision. The collision of the Kuril Arc (KA) with the Northeast Japan Arc (NJA), which started in the middle Miocene, is considered to be a controlling factor for the formation of the Hidaka Mountains, the westward obduction of middle/lower crustal rocks of the KA (the Hidaka Metamorphic Belt (HMB)) and the development of the foreland fold-and-thrust belt on the NJA side. The “Hokkaido Transect” project undertaken from 1998 to 2000 was a multidisciplinary effort intended to reveal structural heterogeneity across this collision zone by integrated geophysical/geological research including seismic refraction/reflection surveys and earthquake observations. An E–W trending 227 km-long refraction/wide-angle reflection profile found a complicated structural variation from the KA to the NJA across the HCZ. In the east of the HCZ, the hinterland region is covered with 4–4.5 km thick highly undulated Neogene sedimentary layers, beneath which two eastward dipping reflectors were imaged in a depth range of 10–25 km, probably representing the layer boundaries of the obducting middle/lower crust of the KA. The HMB crops out on the westward extension of these reflectors with relatively high Vp (>6.0 km/s) and Vp/Vs (>1.80) consistent with middle/lower crustal rocks. Beneath these reflectors, more flat and westward dipping reflector sequences are situated at the 25–27 km depth, forming a wedge-like geometry. This distribution pattern indicates that the KA crust has been delaminated into more than two segments under our profile. In the western part of the transect, the structure of the fold-and-thrust belt is characterized by a very thick (5–8 km) sedimentary package with a velocity of 2.5–4.8 km/s. This package exhibits one or two velocity reversals in Paleogene sedimentary layers, probably formed by imbrication associated with the collision process. From the horizontal distribution of these velocity reversals and other geophysical/geological data, the rate of crustal shortening in this area is estimated to be greater than 3–4 mm/year, which corresponds to 40–50% of the total convergence rate between the NJA and the Eurasian Plate. This means that the fold-and-thrust belt west of the HCZ is absorbing a large amount of crustal deformation associated with plate interaction across Hokkaido Island.     

The meta-igneous granulite xenoliths from Kerguelen Archipelago: evidence of a continent nucleation in an oceanic setting

Xenoliths of meta-igneous origin occur as one of the two main types of ultramafic and mafic xenoliths entrained by alkaline lavas of the Kerguelen islands. These are designated type II xenoliths and are subdivided into three mineralogical groups. Subtype IIa and IIc xenoliths are interpreted as crystallisation products of basaltic melts that were emplaced near the crust-mantle boundary during the early tholeiitic–transitional magmatic activity of the Kerguelen islands. Younger magmatism became more alkaline and subtype IIb xenoliths were formed as high-pressure alkaline cumulates related to the last alkaline volcanic stage. Subsequently, the plagioclase-bearing type II rocks have been re-equilibrated under granulite facies conditions. This addition of mafic material around the crust-mantle boundary is consistent with seismic evidence for crustal thickening to 14–20 km. Calculated compressional seismic velocities (Vp) for the basic granulites are consistent with the range of observed Vp in the low-velocity region underlying the oceanic crust. Such growth in the thickness of the oceanic crust may be caused by intrusion of basalts at different levels in the lithosphere and may provide the heat responsible for granulitic metamorphism in the oceanic setting. This study suggests that basic granulites can account for the observed seismic characteristics of oceanic plateaux and can be important components of Kerguelen oceanic lithosphere where there has been large-scale magma production. Moreover we speculate that the Kerguelen islands and perhaps the surrounding plateau represent a continental nucleation process. Received: 30 September 1997 / Accepted: 17 June 1998     

Volcanic earthquake swarms at Mt. Erebus, Antarctica

Mount Erebus is an active volcano in Antarctica located on Ross Island. A convecting lava lake occupies the summit crater of Mt. Erebus. Since December 1980 the seismic activity of Mt. Erebus has been continuously monitored using a radio-telemetered network of six seismic stations. The seismic activity observed by the Ross Island network during the 1982–1983 field season shows that: (1)Strombolian eruptions occur frequently at the Erebus summit lava lake at rates of 2–5 per day; (2)centrally located earthquakes map out a nearly vertical, narrow conduit system beneath the lava lake; (3)there are other source regions of seismicity on Ross Island, well removed from Mt. Erebus proper. An intense earthquake swarm recorded in October 1982 near Abbott Peak, 10 km northwest of the summit of Mt. Erebus, and volcanic tremor accompanying the swarm, may have been associated with new dike emplacement at depth.     

The structure of the lower crust at the Argentine continental margin, South Atlantic at 44°S

It is well established that the Argentine passive margin is of the rifted volcanic margin type. This classification is based primarily on the presence of a buried volcanic wedge beneath the continental slope, manifested by seismic data as a seaward dipping reflector sequence (SDRS). Here, we investigate the deep structure of the Argentine volcanic margin at 44°S over 200 km from the shelf to the deep oceanic Argentine Basin. We use wide-angle reflection/refraction seismic data to perform a joint travel time inversion for refracted and reflected travel times. The resulting P-wave velocity-depth model confirms the typical volcanic margin structure. An underplated body is resolved as distinctive high seismic velocity (v_p up to 7.5 km/s) feature in the lower crust in the prolongation of a seaward dipping reflector sequence. A remarkable result is that a second, isolated body of high seismic velocity (v_p up to 7.3 km/s) exists landward of the first high-velocity feature. The centres of both bodies are 60 km apart. The high-velocity lower-crustal bodies likely were emplaced during transient magmatic–volcanic events accompanying the late rifting and initial drifting stages. The lateral variability of the lower crust may be an expression of a multiple rifting process in the sense that the South Atlantic rift evolved by instantaneous breakup of longer continental margin segments. These segments are confined by transfer zones that acted as rift propagation barriers. A lower-crustal reflector was detected at 3 to 5 km above the modern Moho and probably represents the lower boundary of stretched continental crust. With this finding we suggest that the continent–ocean boundary is situated 70 km more seaward than in previous interpretations.     

The Gibraltar Arc seismogenic zone (part 2): Constraints on a shallow east dipping fault plane source for the 1755 Lisbon earthquake provided by tsunami modeling and seismic intensity

The Great Lisbon earthquake has the largest documented felt area of any shallow earthquake and an estimated magnitude of 8.5–9.0. The associated tsunami ravaged the coast of SW Portugal and the Gulf of Cadiz, with run-up heights reported to have reached 5–15 m. While several source regions offshore SW Portugal have been proposed (e.g.— Gorringe Bank, Marquis de Pombal fault), no single source appears to be able to account for the great seismic moment as well as all the historical tsunami amplitude and travel time observations. A shallow east dipping fault plane beneath the Gulf of Cadiz associated with active subduction beneath Gibraltar, represents a candidate source for the Lisbon earthquake of 1755.Here we consider the fault parameters implied by this hypothesis, with respect to total slip, seismic moment, and recurrence interval to test the viability of this source. The geometry of the seismogenic zone is obtained from deep crustal studies and can be represented by an east dipping fault plane with mean dimensions of 180 km (N–S) × 210 km (E–W). For 10 m of co-seismic slip an Mw 8.64 event results and for 20 m of slip an Mw 8.8 earthquake is generated. Thus, for convergence rates of about 1 cm/yr, an event of this magnitude could occur every 1000–2000 years. Available kinematic and sedimentological data are in general agreement with such a recurrence interval. Tsunami wave form modeling indicates a subduction source in the Gulf of Cadiz can partly satisfy the historical observations with respect to wave amplitudes and arrival times, though discrepancies remain for some stations. A macroseismic analysis is performed using site effect functions calculated from isoseismals observed during instrumentally recorded strong earthquakes in the region (M7.9 1969 and M6.8 1964). The resulting synthetic isoseismals for the 1755 event suggest a subduction source, possibly in combination with an additional source at the NW corner of the Gulf of Cadiz can satisfactorily explain the historically observed seismic intensities. Further studies are needed to sample the turbidites in the adjacent abyssal plains to better document the source region and more precisely calibrate the chronology of great earthquakes in this region.     

Local seismic array observations at north Evoikos, central Greece, delineate crustal deformation between the North Aegean Trough and Corinthiakos Rift

In order to better constrain and define the microseismic activity at the north Evoikos Gulf and its surrounding area we deployed an onshore/offshore seismic array consisting of 31 three-component seismic digital stations. The array was active from 30 June to 24 October 2003, and covered an area of 2500 km². We located more than 2000 seismic events ranging from 0.7 to 4.5 M_L by using six stations as a minimum in order to define the foci parameters. Recorded seismicity delineated three major zones of deformation: from south to north, the Eretria–Parnis–eastern Corinthiakos zone, the Psachna–Viotia zone, and the Northern Sporades–North Evia–Bralos zone. Alignments of the recorded seismicity follow the tectonic trends and their orientation in the above zones. The whole area accommodates the stress field between the North Aegean Trough and the Corinthiakos Gulf. Rate of deformation intensifies from north to south, as revealed also by historical and instrumental seismicity. The successive change of orientation between the two stress fields fragments the crust in relatively small units and the fault systems developed do not permit the generation of major earthquakes in the north Evoikos area and its immediate vicinity. This is also supported by the instrumental seismicity of the last century. Larger events reported in historical times are probably overestimated.Most seismic activity is crustal. Subcrustal events were recorded mainly below the Lichades area and are interpreted as the consequence of the subduction of the Ionian oceanic lithosphere below the Hellenides. The Lichades volcano is the most northern end of the Hellenic volcanic arc.At present the highest seismic activity is associated with the Psachna region of north Evia that has been continuously active since 2001. Considering, however, the development of the seismic activity during the last decade, there has been a sequence of large events, i.e., Parnis in 1999, Skyros in 2001 and Psachna in 2001–2003. This demonstrates the fact that the tectonic deformation in all this area is intense and important for the accommodation of the stress field of the North Aegean Trough to that of the Corinthiakos Rift.     

Aftershocks series monitoring of the September 18, 2004 M = 4.6 earthquake at the western Pyrenees: A case of reservoir-triggered seismicity?

On September 18, 2004, a 4.6 mbLg earthquake was widely felt in the region around Pamplona, at the western Pyrenees. Preliminary locations reported an epicenter less than 20 km ESE of Pamplona and close to the Itoiz reservoir, which started impounding in January 2004. The area apparently lacks of significant seismic activity in recent times. After the main shock, which was preceded by series of foreshocks reaching magnitudes of 3.3 mbLg, a dense temporal network of 13 seismic stations was deployed there to monitor the aftershocks series and to constrain the hypocentral pattern. Aftershock determinations obtained with a double-difference algorithm define a narrow epicentral zone of less than 10 km², ESE–WNW oriented. The events are mainly concentrated between 3 and 9 km depth. Focal solutions were computed for the main event and 12 aftershocks including the highest secondary one of 3.8 mbLg. They show mainly normal faulting with some strike-slip component and one of the nodal planes oriented NW–SE and dipping to the NE. Cross-correlation techniques applied to detect and associate events with similar waveforms, provided up to 33 families relating the 67% of the 326 relocated aftershocks. Families show event clusters grouped by periods and migrating from NW to SE. Interestingly, the narrow epicentral zone inferred here is located less than 4 km away from the 111-m high Itoiz dam. These hypocentral results, and the correlation observed between fluctuations of the reservoir water level and the seismic activity, favour the explanation of this foreshock–aftershock series as a rapid response case of reservoir-triggered seismicity, burst by the first impoundment of the Itoiz reservoir. The region is folded and affected by shallow dipping thrusts, and the Itoiz reservoir is located on the hangingwall of a low angle southward verging thrust, which might be a case sensible to water level fluctuations. However, continued seismic monitoring in the coming years is mandatory in this area to infer more reliable seismotectonic and hazard assessments.     

The MW = 6.3 2003 Lefkada earthquake (Greece) and induced stress transfer changes

A large earthquake of magnitude M_W = 6.3 occurred on 14 August 2003 NW of the Lefkada Island, which is situated at the Ionian Sea (western Greece). The source parameters of this event are determined using body-wave modeling. The focal depth was found equal to 9 km, the constrained focal mechanism revealed dextral strike–slip motion (φ = 15°, Δ = 80° and λ = 170°), the duration of the source time function was 8 s and the seismic moment 2.9 × 10²⁵ dyn cm. The earthquake occurred close to the northern end of the Kefallinia transform fault, where the 1994 moderate event and its aftershock sequence were also located. The epicentral distribution of the 2003 aftershock sequence revealed the existence of two clusters. The first one is located close to the epicentral area of the mainshock, while the second southern, close to the northwestern coast of the Kefallinia Island. A gap of seismicity is observed between the two clusters. The length of the activated zone is approximately 60 km. The analysis of data revealed that the northern cluster is directly related to the mainshock, while the southern one was triggered by stress transfer caused by the main event.     

Mantle flow-induced crustal thinning in the area between the easternmost part of the Anatolian plate and the Arabian Foreland (E Turkey) deduced from the geological and geophysical data

Eastern Anatolia consisting of an amalgamation of fragments of oceanic and continental lithosphere is a current active intercontinental contractional zone that is still being squeezed and shortened between the Arabian and Eurasian plates. This collisional and contractional zone is being accompanied by the tectonic escape of most of the Anatolian plate to the west by major strike-slip faulting on the right-lateral North Anatolian Transform Fault Zone (NATFZ) and left-lateral East Anatolian Transform Fault Zone (EATFZ) which meet at Karlıova forming an east-pointing cusp. The present-day crust in the area between the easternmost part of the Anatolian plate and the Arabian Foreland gets thinner from north (ca 44 km) to south (ca 36 km) relative to its eastern (EAHP) and western sides (central Anatolian region). This thinner crustal area is characterized by shallow CPD (12–16 km), very low Pn velocities (< 7.8 km/s) and high Sn attenuation which indicate partially molten to eroded mantle lid or occurrence of asthenospheric mantle beneath the crust. Northernmost margin of the Arabian Foreland in the south of the Bitlis–Pötürge metamorphic gap area is represented by moderate CPD (16–18 km) relative to its eastern and western sides, and low Pn velocities (8 km/s). We infer from the geophysical data that the lithospheric mantle gets thinner towards the Bitlis–Pötürge metamorphic gap area in the northern margin of the Arabian Foreland which has been most probably caused by mechanical removal of the lithospheric mantle during mantle invasion to the north following the slab breakoff beneath the Bitlis–Pötürge Suture Zone. Mantle flow-driven rapid extrusion and counterclockwise rotation of the Anatolian plate gave rise to stretching and hence crustal thinning in the area between the easternmost part of the Anatolian plate and the Arabian Foreland which is currently dominated by wrench tectonics.     

Seismic properties of the upper crust in the central Friuli area (northeastern Italy) based on petrophysical data

The compressional and shear wave velocities have been measured at room temperature and pressure up to 450 MPa on 5 sedimentary rock samples, representative of the most common lithologies of the upper crust in the central Friuli area (northeastern Italy). At 400 MPa confining pressure the Triassic dolomitic rock shows the highest velocities (Vp  7 km/s, Vs  3.6 km/s), the Jurassic and Triassic limestones samples intermediate velocities (Vp  6.3 /s, Vs  3.5 km/s) and the Cenozoic and Paleozoic sandstones the lowest velocities (Vp  6.15 km/s, Vs  3.35 km/s). The Paleozoic sandstone sample is characterized by the strongest anisotropy (10%) and significant birefringence (0.2 km/s) is found only on the Cenozoic sandstone sample. We elaborated the synthetic profiles of seismic velocities, density, elastic parameters and reflection coefficient, related to 4 one-dimensional geological models extended up to 22 km depth. The synthetic profiles evidence high rheological contrasts between Triassic dolomitic rocks and the soft sandstones and the Jurassic limestones. The Vp profiles obtained from laboratory measurements match very well the in-situ Vp profile measured by sonic log for the limestones and dolomitic rocks, supporting our one-dimensional modelling of the calcareous-carbonatic stratigraphic series. The Vp and Vs values of the synthetic profiles are compared with the corresponding ones obtained from the 3-D tomographic inversion of local earthquakes. The laboratory Vp are generally higher than the tomographic ones with major discrepancies for the dolomitic lithology. The comparison with the depth location of seismicity reveals that the seismic energy is mainly released in correspondence of high-contrast rheological boundaries.     

Seismic attenuation of coda waves in the eastern region of Cuba

Cuba's seismic attenuation had never been studied in detail. In this paper we present the results of the research on the seismic attenuation of Cuba's eastern zone based upon the information collected by the seismological Cuban network from 1998 to 2003. 581 earthquakes were selected from the Cuban catalogue to make this study. All of them, recorded by at least three seismic stations, had their epicenters located in the eastern Cuban region (19.3–22 N, 79–73 W), epicentral distances between 15 km and 213 km, their coda duration magnitudes ranging from 2 and 4.1 and their focal depths reaching up to 30 km. The seismic wave attenuation was studied using coda waves. The single scattering method proposed by Sato in 1977 was applied, the attenuation and frequency dependency for different paths and the correlation of the results with the geotectonics of the region are presented in this paper.The mean Q_c value calculated was Q_c = (64 ± 2)f^{0.84 ± 0.01}. The relatively low Q₀ and the high frequency dependency agree with the values of a region characterized by a high tectonic activity. The Q_c values of seven subregions of eastern Cuba were calculated and correlated with the geology and tectonics of the area.