Quaternary sedimentology of the Rose Creek fan delta, Walker Lake, Nevada, USA, and implications to fan-delta facies models

The 3·2 km long Rose Creek fan delta of west‐central Nevada is prograding from an active rift margin into the 32 m deep Walker Lake. A case study of the forms, processes and facies of this fan delta reveals that the proximal and medial zones mainly are of sub‐aerial origin, and the distal zone is of lacustrine origin. Pebbly to bouldery rock‐avalanche mounds >100 m thick (Facies A) and muddy to bouldery debris flow levées 0·5 to 2·0 m thick (Facies B) dominate the proximal zone, whereas mostly matrix‐supported cobbly pebbly debris flow lobes 0·1 to 1·0 m thick (Facies C) typify the medial zone. Surficial pebble lags and gully fills (Facies D) are widespread in both zones but, in exposures, comprise only partings or lenticles between debris flow units. The distal fan delta mainly consists of lakeshore to lake‐bottom tracts formed by extensive wave reworking of debris flow facies. Nearshore deposits include erosional cobbly boulder lag beaches (Facies E), pebbly constructional beaches attached at headcuts or on barrier spits (Facies F), pebbly upper shoreface (Facies G) and sandy lower shoreface (Facies H) tracts positioned lakeward of the beach, and pebbly landward‐dipping foresets (Facies I) and backshore‐pond sand and mud (Facies J) present landward of the spits. Erosional lag beaches fringe the windward north side of the fan‐delta front, attached constructional beaches characterize the central zone, and southward‐elongating barrier spits typify the leeward south side, extending from the zone of greatest projection of the fan delta into the lake. Shoreline facies asymmetry results from largely unidirectional longshore drift caused by high fetch to the north and minimal fetch to the south, combined with the arcuate shape of the fan‐delta front. The spits overlie a platform deposited below common wave base consisting of south‐east‐trending cones of pebbly Gilbert foresets (Facies K) and sandy toesets (Facies L). Typically slumped silt and mud (Facies M) fringe both this platform and lower shoreface sand in deeper water. This case demonstrates facies types and patterns that are inconsistent with the widely promoted fan‐delta facies model having a front consisting of an apron of radially directed Gilbert foresets deposited where sub‐aerial flows enter the lake. The Rose Creek fan‐delta front instead features a sharp contact between sub‐aerial and lakeshore facies formed where waves erode, sort and redistribute heterogeneous debris flow sediment into the various shallow‐to‐deep lake facies. Gilbert foresets are present only in the lee of the fan delta where sediment moving by longshore drift reaches the brink of the spit front. This facies scenario results from the infrequency of fan‐building events versus nearly constant wind‐induced waves, a scenario that, in contrast to the popular Gilbert model, probably is the norm for fan deltas. The level of Walker Lake, and thus the position of wave reworking on the Rose Creek fan delta, fluctuated over a range of ～157 m during the last 18 kyr, producing complex interfingering between sub‐aerial and lakeshore facies across a 1700 m wide radial belt, typifying a wave‐modified, freestand lacustrine fan delta.     

Jet-efflux deposits of a subaqueous ice-contact fan,glacial Lake Rinteln,northwestern Germany

The coarse-grained, ice-contact, Porta Subaqueous Fan/Delta Complex was deposited in glacial Lake Rinteln at the margin of the Saalian ice sheet that advanced south of the Weser Chains, NW Germany. The ice-proximal depositional system was up to 15 km long and 10 km wide. The present study deals with ice-proximal subaqueous fan deposits, which are interpreted as products of a subcritical plane-wall outflow jet that periodically passed into a supercritical jet with hydraulic jump. The proximal facies assemblage consists of the coarse, clast-supported gravelly deposits of a hyperconcentrated (high-density) effluent and of related cohesionless debris flows attributed to the conduit or immediate proximal jet outflow zone of flow establishment. The intermediate facies assemblage, attributed to the outflow jet proximal zone of flow transition, is dominated by normally graded and cross-stratified gravels with scour structures at their bases; these gravels were deposited by a high-density effluent capable of forming mouthbar-like features. These deposits pass downcurrent into an assemblage of planar parallel-stratified and planar and trough cross-stratified sands and pebbly sands (partially interpreted as antidunes), with abundant scour structures and intercalated layers of fine sand/silt and silty mud, attributed to the jet distal zone of flow transition. The distal facies assemblage consists of trough cross-stratified sands and pebbly sands, and is attributed to the outflow jet proximal zone of established flow. The sedimentary succession as a whole has wedge-shape geometry, with a gentle fan-shaped inclination of the bedding from the southeast to the southwest. Repeated vertical alternations of supercritical and subcritical deposits and muddy interlayers can be attributed to temporary fluctuations in the meltwater outflow, whereas the overall upward fining of the succession indicates a net decline of meltwater discharges.     

Evidence of iceberg-ploughing in a subaqueous ice-contact fan, glacial Lake Rinteln, NW Germany

The Coppenbrügge subaqueous ice‐contact fan complex of early Saalian age is about 10 km long and up to 10 km wide and is composed of offset‐stacked fan clinothems that are transgressive‐regressive sequences formed during an overall lake level rise. The individual fan bodies consist of coarse gravel in the ice‐proximal part, passing distally into sandy facies and showing large‐scale foreset bedding. The iceberg scour recognized in an open‐pit outcrop is up to 1.5m deep, up to 2m wide and cut in undisturbed mid‐fan deposits. The scour‐fill can be traced laterally for about 15m and consists of sheared sand and, in the frontal zone, of downbent overlying strata surrounded by a zone of deformed sediments. The deformed sediment produced by the iceberg keel's shearing of the trough walls is a sand mass containing angular soft‐sediment clasts that show internal folds and fractures. The basal surface of the deformed sediment is a nearly horizontal shear plane, steepening up laterally as a discrete thrust and showing a flat‐ramp‐flat geometry. The scour was formed by the iceberg keel's ploughing the substrate and pushing the sediment sideways and frontally, forming a ridge of deformed sediments at the trough end. This ridge was concurrently eroded by an accompanying meltwater underflow which apparently developed a horseshoe system of scouring vortices around the grounded iceberg. The current's scour was filled with massive, non‐stratified sand deposited rapidly from turbulent suspension. The iceberg eventually broke up and its keel part was buried. As these ice fragments gradually melted, the space was closed by normal faulting and downbending of overlying strata. The collapsing scour‐fill became partly liquified, and the resulting water‐escape structures cut the normal faults and the overlying deposits. Though produced chiefly by tangential shear strain, iceberg‐ploughing features are readily distinguishable from other glaciotectonic deformations. They can serve as a diagnostic criterion for glaciolacustrine or glaciomarine environments and the distinguishing of ice‐contact subaqueous fans from ice‐contact deltas in the stratigraphic record.     

Seismic stratigraphy of Waterton Lake, a sediment-starved glaciated basin in the Rocky Mountains of Alberta, Canada and Montana, USA

Upper and Middle Waterton lakes fill a glacially scoured bedrock basin in a large (614 km²) watershed in the eastern Front Ranges of the Rocky Mountains of southern Alberta, Canada and northern Montana, U.S.A. The stratigraphic infill of the lake has been imaged with 123 km of single-channel FM sonar (‘chirp') reflection profiles. Offshore sonar data are combined with more than 2.5 km of multi-channel, land-based seismic reflection profiles collected from a large fan-delta. Three seismic stratigraphic successions (SSS I to III) are identified in Waterton Lake resting on a prominent basal reflector (bedrock) that reaches a maximum depth of about 250 m below lake level. High-standing rock steps (reigels) divide the lake into sub-basins that can be mapped using lake floor reflection coefficients. A lowermost transparent to poorly stratified seismic succession (SSS I, up to 30 m thick) is present locally between bedrock highs and has high seismic velocities (1750–2100 m/s) typical of compact till or outwash. A second stratigraphic succession (SSS II, up to 50 m thick), occurs throughout the lake basin and is characterised by continuous, closely spaced reflectors typical of repetitively bedded and rhythmically laminated silts and clays most likely deposited by underflows from fan-deltas; paleo-depositional surfaces identify likely source areas during deglaciation. Intervals of acoustically transparent seismic facies, up to 5 m thick, are present within SSS II. At the northern end of Upper Waterton Lake, SSS II has a hummocky surface underlain by collapse structures and chaotic facies recording the melt of buried ice. Sediment collapse may have triggered downslope mass flows and may account for massive facies in SSS II. A thin Holocene succession (SSS III, <5 m) shows very closely spaced reflectors identified as rhythmically laminated fine pelagic sediment deposited from interflows and overflows. SSS III contains Mt. Mazama tephra dated at 6850 yr BP.     

Variable style of transition between Palaeogene fluvial fan and lacustrine systems, southern Pyrenean foreland, NE Spain

Two Palaeogene fluvial fan systems linked to the south‐Pyrenean margin are recognized in the eastern Ebro Basin: the Cardona–Súria and Solsona–Sanaüja fans. These had radii of 40 and 35 km and were 800 and 600 km² in area respectively. During the Priabonian to the Middle Rupelian, the fluvial fans built into a hydrologically closed foreland basin, and shallow lacustrine systems persisted in the basin centre. In the studied area, both fans are part of the same upward‐coarsening megasequence (up to 800 m thick), driven by hinterland drainage expansion and foreland propagation of Pyrenean thrusts. Fourteen sedimentary facies have been grouped into seven facies associations corresponding to medial fluvial fan, channelized terminal lobe, non‐channelized terminal lobe, mudflat, deltaic, evaporitic playa‐lake and carbonate‐rich, shallow lacustrine environments. Lateral correlations define two styles of alluvial‐lacustrine transition. During low lake‐level stages, terminal lobes developed, whereas during lake highstands, fluvial‐dominated deltas and interdistributary bays were formed. Terminal lobe deposits are characterized by extensive (100–600 m wide) sheet‐like fine sandstone beds formed by sub‐aqueous, quasi‐steady, hyperpycnal turbidity currents. Sedimentary structures and trace fossils indicate rapid desiccation and sub‐aerial exposure of the lobe deposits. These deposits are arranged in coarsening–fining sequences (metres to tens of metres in thickness) controlled by a combination of tectonics, climatic oscillations and autocyclic sedimentary processes. The presence of anomalously deeply incised distributary channels associated with distal terminal lobe or mudflat deposits indicates rapid lake‐level falls. Deltaic deposits form progradational coarsening‐upward sequences (several metres thick) characterized by channel and friction‐dominated mouth‐bar facies overlying white‐grey offshore lacustrine facies. Deltaic bar deposits are less extensive (50–300 m wide) than the terminal lobes and were also deposited by hyperpycnal currents, although they lack evidence of emergence. Sandy deltaic deposits accumulated locally at the mouths of main feeder distal fan streams and were separated by muddy interdistributary bays; whereas the terminal lobe sheets expand from a series of mid‐fan intersection points and coalesced to form a more continuous sandy fan fringe.     

Palaeoenvironmental reconstruction of a middle Miocene alluvial fan to cyclic shallow lacustrine depositional system in the Calatayud Basin (NE Spain)

ABSTRACT The middle Miocene sedimentary fill of the Calatayud Basin in north‐eastern Spain consists of proximal to distal alluvial fan‐floodplain and shallow lacustrine deposits. Four main facies groups characteristic of different sedimentary environments are recognized: (1) proximal and medial alluvial fan facies that comprise clast‐supported gravel and subordinate sandstone and mudstone, the latter exhibiting incipient pedogenic features; (2) distal alluvial fan facies, formed mainly of massive mudstone, carbonate‐rich palaeosols and local carbonate pond deposits; (3) lake margin facies, which show two distinct lithofacies associations depending on their distribution relative to the alluvial fan system, i.e. front (lithofacies A), comprising massive siliciclastic mudstone and tabular carbonates, or lateral (lithofacies B) showing laminated and/or massive siliciclastic mudstone alternating with tabular and/or laminated carbonate beds; and (4) mudflat–shallow lake facies showing a remarkable cyclical alternation of green‐grey and/or red siliciclastic mudstone units and white dolomitic carbonate beds. The cyclic mudflat–shallow lake succession, as exposed in the Orera composite section (OCS), is dominantly composed of small‐scale mudstone–carbonate/dolomite cycles. The mudstone intervals of the sedimentary cycles are interpreted as a result of sedimentation from suspension by distal sheet floods, the deposits evolving either under subaerial exposure or water‐saturated conditions, depending on their location on the lacustrine mudflat and on climate. The dolomite intervals accumulated during lake‐level highstands with Mg‐rich waters becoming increasingly concentrated. Lowstand to highstand lake‐level changes indicated by the mudstone/dolomite units of the small‐scale cycles reflect a climate control (from dry to wet conditions) on the sedimentation in the area. The spatial distribution of the different lithofacies implies that deposition of the small‐scale cycles took place in a low‐gradient, shallow lake basin located in an interfan zone. The development of the basin was constrained by gradual alluvial fan aggradation. Additional support for the palaeoenvironmental interpretation is derived from the isotopic compositions of carbonates from the various lithofacies that show a wide range of δ¹⁸O and δ¹³C values varying from ?7·9 to 3·0‰ PDB and from ?9·2 to ?1·7‰ PDB respectively. More negative δ¹⁸O and δ¹³C values are from carbonate‐rich palaeosols and lake‐margin carbonates, which extended in front of the alluvial fan systems, whereas more positive values correspond to dolomite beds deposited in the shallow lacustrine environment. The results show a clear trend of δ¹⁸O enrichment in the carbonates from lake margin to the centre of the shallow lake basin, thereby also demonstrating that the lake evolved under hydrologically closed conditions.     

Bolla Bollana boulder beds: A Neoproterozoic trough mouth fan in South Australia?

The Bolla Bollana Formation is an exceptionally thick (ca 1500 m), rift‐related sedimentary succession cropping out in the northern Flinders Ranges, South Australia, which was deposited during the Sturtian (mid Cryogenian) glaciation. Lithofacies analysis reveals three distinct facies associations which chart changing depositional styles on an ice‐sourced subaqueous fan system. The diamictite facies association is dominant, and comprises both massive and stratified varieties with a range of clast compositions and textures, arranged into thick beds (1 to 20 m), representing stacked, ice‐proximal glaciogenic debris‐flow deposits. A channel belt facies association, most commonly consisting of normally graded conglomerates and sandstones, displays scour and fill structure of ca 10 m width and 1 to 3 m depth: these strata are interpreted as channelized turbidites. Rare mud‐filled channels in this facies association bear glacially striated lonestones. Finally, a sheet heterolithics facies association contains a range of conglomerates through sandstones to silty shales arranged into clear, normally graded cycles from the lamina to bed scale. These record a variety of non‐channelized turbidites, probably occupying distal and/or inter‐channel locations on the subaqueous fan. Coarsening and thickening‐up cycles, capped by dolomicrites or mudstones, are indicative of lobe build out and abandonment, potentially as a result of ice lobe advance and stagnation. Dropstones, recognized by downwarped and punctured laminae beneath pebbles to boulders in shale, or in delicate climbing ripple cross‐laminated siltstones, are clearly indicative of ice rafting. The co‐occurrence of ice‐rafted debris and striated lonestones strongly supports a glaciogenic sediment source for the diamictites. Comparison to Pleistocene analogues enables an interpretation as a trough mouth fan, most probably deposited leeward of a palaeo‐ice stream. Beyond emphasizing the highly dynamic nature of Sturtian ice sheets, these interpretations testify to the oldest trough mouth fan recorded to date.     

The Middle Pleistocene glaciolacustrine environment of an ice‐dammed mountain valley,Sudeten Mountains,Poland

This article reports on an Early Saalian proglacial lake formed between the Scandinavian Ice Sheet and the front of the Sudeten Mountains, Poland. Sediments investigated at Mys?ów point to a transition from glacifluvial to glaciolacustrine environments. The bulk of the sediments was deposited in deep‐water Gilbert‐type deltas (A–E complexes). A delta plain (topset) gradually passes into a subaerial plateau and then a clastic shoreline and the subaquatic slope of a prograding delta (foreset). The glaciolacustrine lithofacies represent a number of lake‐basin environments, from marginal subaqueous slopes to distal parts of a subaqueous fan. Glaciolacustrine and glaciodeltaic deposits locally reach ?50–70 m in thickness. Analyses of A–E complexes indicate that the lake existed for more than 130 years and that its origin and evolution were closely connected with the ice front. This case study records lake sedimentation at an ice‐sheet margin with cohesionless gravity flows, turbidity currents, debris‐avalanching and, to a much lesser degree, parapelagic suspension fall‐out and ice‐raft dumping. In the initial stage, the lake extended more than 10 km to the south, and the deposition was relatively slow. In the second stage, recession of the ice sheet caused rapid growth of a delta. The third and ultimate stage coincided with the final glacial recession, with rapid deposition occurring only on the lake bottom. The model of the glaciolacustrine environment presented here may also be applicable to many other proglacial lakes in mountain areas.     

Seismic evidence of up to 200 m lake‐level change in Southern Patagonia since Marine Isotope Stage 4

Maar lake Laguna Potrok Aike is located north of the Strait of Magellan (south‐eastern Patagonia). Seismic reflection profiles revealed a highly dynamic palaeoclimate history. Dunes were identified in the eastern part of the lake at approximately 30 to 80 m below the lake floor, overlying older lacustrine strata, and suggest that the region experienced dry conditions probably combined with strong westerly winds. It is quite likely that this can be linked to a major dust event recorded in the Antarctic ice cores during Marine Isotope Stage 4. The dunes are overlain by a series of palaeo‐shorelines indicating a stepwise water‐level evolution of a new lake established after this dry period, and thus a change towards wetter conditions. After the initial, rapid and stepwise lake‐level rise, the basin became deeper and wider, and sediments deposited on the lake shoulder at approximately 33 m below present‐day lake level point towards a long period of lake‐level highstand between roughly 53·5 ka cal. bp and 30 ka cal. bp with a maximum lake level some 200 m higher than the desiccation horizon. This highstand was then followed by a regressional phase of uncertain age, although it must have happened some time between approximately 30 ka cal. bp and 6750 yrs cal. bp . Dryer conditions during the Mid‐Holocene are evidenced by a dropping lake level, resulting in a basin‐wide erosional unconformity on the lake shoulder. A second stepwise transgression between ca 5·8 to 5·4 ka cal. bp and ca 4·7 to 4 ka cal. bp with palaeo‐shorelines deposited on the lake shoulder unconformity again indicates a change towards wetter conditions.     

Sedimentological and deformational criteria for discriminating subglaciofluvial deposits from subaqueous ice‐contact fan deposits: A Pleistocene example (Ireland)

A pit located near Ballyhorsey, 28 km south of Dublin (eastern Ireland), displays subglacially deposited glaciofluvial sediments passing upwards into proglacial subaqueous ice‐contact fan deposits. The coexistence of these two different depositional environments at the same location will help with differentiation between two very similar and easily confused glacial lithofacies. The lowermost sediments show aggrading subglacial deposits indicating a constrained accommodation space, mainly controlled by the position of an overlying ice roof during ice‐bed decoupling. These sediments are characterized by vertically stacked tills with large lenses of tabular to channelized sorted sediments. The sorted sediments consist of fine‐grained laminated facies, cross‐laminated sand and channelized gravels, and are interpreted as subglaciofluvial sediments deposited within a subglacial de‐coupled space. The subglaciofluvial sequence is characterized by glaciotectonic deformation structures within discrete beds, triggered by fluid overpressure and shear stress during episodes of ice/bed recoupling (clastic dykes and folds). The upper deposits correspond to the deposition of successive hyperpycnal flows in a proximal proglacial lake, forming a thick sedimentary wedge erosively overlying the subglacial deposits. Gravel facies and large‐scale trough bedding sand are observed within this proximal wedge, while normally graded sand beds with developed bedforms are observed further downflow. The building of the prograding ice‐contact subaqueous fan implies an unrestricted accommodation space and is associated with deformation structures related to gravity destabilization during fan spreading (normal faults). This study facilitates the recognition of subglacial/submarginal depositional environments formed, in part, during localized ice/bed coupling episodes in the sedimentary record. The sedimentary sequence exposed in Ballyhorsey permits characterization of the temporal framework of meltwater production during deglaciation, the impact on the subglacial drainage system and the consequences on the Irish Sea Ice Stream flow mechanisms.     

Diamictic sediments within high Arctic lake sediment cores: evidence for lake ice rafting along the lateral glacial margin

Sediment cores from six small lake basins in the Canadian high Arctic reveal a gravel‐rich (≤30% by weight) to gravel‐poor (≥2%) diamict facies underlying massive, post‐glacial, clayey silt. Ten other lakes contain a second diamict facies within what are interpreted to be glaciolacustrine sedimentary assemblages. The sedimentology, clast fabrics and fossil remains (diatoms, ostracodes and chironomid head capsules) within both diamict facies suggest that these deposits are not tills. Clast fabrics yielded low S₁ (0·41–0·57) and high S₃ (0·09–0·22) eigenvalues, placing them within the range of ice‐rafted diamictons and glacigenic sediment flows. The high percentage of clast dip angles >45° (15–61%), random clast azimuth and lower diamict contacts conformable to underlying current‐bedded sediment favours an origin as a rain‐out or settling deposit. Samples of the matrix and scrapings of clasts from the diamicts revealed a diatom assemblage dominated by littoral and planktonic forms, such as are found in the littoral regions of the lakes today. This contrasts sharply with the assemblages within the overlying clayey silt, in which benthic forms predominate. Clasts are thus interpreted to have been rafted from the littoral areas of the lake. The process proposed to explain this is rafting by the lake ice cover in a glacial‐marginal environment. Early season meltwater, impounded along the lateral margin of retreating cold‐based glaciers, would buoyantly lift the lake ice cover and any adfrozen lake sediment. Higher lake levels and increased areal extent of seasonal freeze‐on between the lake ice cover and the lake bed would allow the redeposition of littoral sediments to the benthic regions through greater lateral shifting of the ice cover as it broke up. Incision by meltwater streams into the lateral glacial margins would later isolate the lake, allowing seasonal warming of lake water, enough to support the growth and maturation of the ostracode and chironomid species found as fossils within the diamicts.     

In a PICL: The sedimentary deposits and facies of perennially ice‐covered lakes

Perennially ice‐covered lakes can have significantly different facies than open‐water lakes because sediment is transported onto the ice, where it accumulates, and sand grains preferentially melt through to be deposited on the lake floor. To characterize the facies in these lakes, sedimentary deposits from five Antarctic perennially ice‐covered lakes were described using lake‐bottom observations, underwater video and images, and sediment cores. One lake was dominated by laminated microbial mats and mud (derived from an abutting glacier), with disseminated sand and rare gravel. The other four lakes were dominated by laminated microbial mats and moderately well to moderately sorted medium to very coarse sand with sparse granules and pebbles; they contained minor interstitial or laminated mud (derived from streams and abutting glaciers). The sand was disseminated or localized in mounds and 1 m to more than 10 m long elongate ridges. Mounds were centimetres to metres in diameter; conical, elongate or round in shape; and isolated or deposited near or on top of one another. Sand layers in the mounds had normal, inverse, or no grading. Nine mixed mud and sand facies were defined for perennially ice‐covered lakes based on the relative proportion of mud to sand and the style of sand deposition. While perennially ice‐covered lake facies overlap with other ice‐influenced lakes and glaciomarine facies, they are characterized by a paucity of grains coarser than granules, a narrow range in sand grain sizes, and inverse grading in the sand mounds. These facies can be used to infer changes in ice cover through time and to identify perennially ice‐covered lakes in the rock record. Ancient perennially ice‐covered lakes are expected on Earth and Mars, and their characterization will provide new insights into past climatic conditions and habitability.     

广西百色盆地古近系始新统沉积相特征及演化

利用野外露头、地震、测井和分析化验等资料,对盆地古近系始新统那读组和百岗组进行层序地层和沉积相研究。那读组和百岗组可划分为3个Ⅲ级层序,9个体系域,那读组那三段构成层序Ⅰ,那读组那二段和那一段构成层序Ⅱ,百岗组构成层序Ⅲ。层序Ⅰ和层序Ⅱ是盆地断陷期沉积,发育冲积扇相、河流相、三角洲相、扇三角洲相、深湖亚相和滨-浅湖亚相。层序Ⅱ湖泊沉积范围广,厚度大,厚层的湖相暗色泥岩是盆地主要烃源岩和区域性盖层。层序Ⅲ是盆地坳陷期的沉积,发育冲积扇相、扇三角洲相、河流相、三角洲相和滨-浅湖亚相。盆地中古近系沉积经过了洪积或冲积扇、河流三角洲→湖泊（扇三角洲）→河流的发育过程,反映了盆地从初期形成→扩张→萎缩的完整的演化序列。在层序Ⅰ和层序Ⅱ的低水位体系域,田东凹陷的中央断凹、南部次凹和那笔凸起的北部断鼻等区带发育长轴分布的河流三角洲砂岩,这些砂岩处于烃源岩成熟区,油气成藏条件优越,是河道岩性油藏勘探的有利区。在层序Ⅱ湖侵体系域和高水位体系域,北部陡坡发育扇三角洲砂体,与烃源岩指状交叉接触,有利于油气运聚成藏,容易形成大量上倾尖灭岩性油藏。     

High-arctic fan delta recording deglaciation and environment disequilibrium

Study of a Holocene fan delta in Adventfjorden, Spitsbergen, provides new insight into the nature of high‐arctic coastal sedimentation and deglaciation dynamics. The fjord‐side, gravelly Gilbert‐type fan delta began to form at the local marine limit c. 10 ka BP, supplied seasonally with sediment by meltwater from a cirque glacier left behind by the retreating Late Weichselian ice sheet. Relative sea level had fallen by 63 m, and the fan delta reached a radius of c. 1 km by 6 ka BP, when the relic glacier eventually melted down and fluvial activity declined. A strong influence of marine processes is recorded by the fan‐delta foreset facies, overlain by alluvium. Supplied with sediment by longshore drift, the fan‐delta front continued to advance at a lower rate, while relative sea level fell further by 5 m and ceased to fall around 5·4 ka BP. The following transgression was countered by longshore sediment supply until 4·7 ka BP, when the delta‐front beach aggraded and a spit platform began to climb onto the delta plain, recording a relative sea‐level rise of 4 m. The subsequent regression was initially non‐depositional, with the relative sea level falling by > 4 m in 200 years, outpacing fluvial supply, and the re‐emerging fan delta being swept by longshore currents. A regressive beach began to form c. 4·3 ka BP, while relative sea level gradually reached its present‐day position. The feeder braided stream was wandering across the delta plain during this time, but incised once the fan‐delta shoreline began to retreat by wave erosion and turned into a receding modern escarpment. The stream has since been adjusting its profile by gradually eroding the pre‐existing alluvium and distributing the coarse sediment supplied from catchment slopes by debrisflows and snow avalanches. Modern snowflows have also spread debris onto the abandoned fan surface. The erosional retreat of the fan delta has been accompanied by lateral shoreline accretion on both its sides. The study has important regional implications and demonstrates that Holocene fan deltas can provide a valuable record of the deglaciation history in high‐arctic terrains, where glacial deposits are scarcely preserved on land.     

Sedimentary processes and facies of the waterlaid Anvil Spring Canyon alluvial fan, Death Valley, California

The Anvil Spring Canyon fan of the Panamint Range piedmont in central Death Valley was built entirely by water-flow processes, as revealed by an analysis of widespread 2- to 12-m-high stratigraphic cuts spanning the 9·7 km radial length of this 2·5–5·0° sloping fan. Two facies deposited from fan sheetfloods dominate the fan from apex to toe. The main one (60–95% of cuts) consists of sandy, granular, fine to medium pebble gravel that regularly and sharply alternates with cobbly coarse to very coarse pebble gravel in planar couplets 5–25 cm thick oriented parallel to the fan surface. The other facies (0–25% of cuts) comprises 10- to 60-cm-thick, wedge-planar and wedge-trough beds of pebbly sand and sandy pebble gravel in backsets sloping 3–28°. Both facies are interpreted as resulting from rare, sediment-charged flash floods from the catchment, and were deposited by supercritical standing waves of expanding sheetfloods on the fan. Standing waves were repeatedly initiated, enlarged, migrated, and then terminated either by gradually rejoining the flood or by more violent breakage and washout. The frequent autocyclic growth and destruction of standing waves during an individual sheetflood resulted in the deposition of multiple coarse and fine couplet and backset sequences 50–250 cm thick across the active depositional lobe of the fan. Erosional intensity during washout of the standing wave determined whether early-phase backset-bed deposits or washout-phase sheetflood couplet deposits were selectively preserved in a given cycle. Two minor facies are also found in the Anvil fan. Pebble–cobble gravel lags (0–20% of cuts) are present above erosional scours into the sheetflood couplet and backset deposits. They consist of coarse gravel concentrated through fine-fraction winnowing of the host sheetflood facies by sediment-deficient water flows. This reworking occurred during recessional flood stage or from non-catastrophic discharge during the long intervals between major flash floods. This facies is common at the surface, giving rise to a ‘braided-stream’ appearance. However, it is stratigraphically limited, present as thin, continuous to discontinuous beds or lenses that bound 50- to 250-cm-thick sheetflood sequences. The other minor facies of the Anvil fan consists of clast-supported and imbricated, thickly stratified, pebbly, cobbly, boulder gravel present in narrow, radially aligned ribbons nested within sheetflood deposits. This facies is interpreted as representing deposition in the incised channel of the fan, a subenvironment characterized by greater flow competence resulting from maintained depth from channel-wall confinement, and by more frequent water flows and winnowing events caused by its direct connection with the catchment feeder channel.     

Glacimarine lithofacies,provenance and depositional processes on a West Greenland trough‐mouth fan

Along the West Greenland continental margin adjoining Baffin Bay, bathymetric data show a series of large submarine fans located at the mouths of cross‐shelf troughs. One of these fans, termed here ‘Uummannaq Fan’, is a trough‐mouth fan built largely by debris delivered from a fast‐flowing outlet of the Greenland Ice Sheet during past glacial maxima. Cores from this fan provide the first information on glacimarine sedimentary facies within a major West Greenland trough‐mouth fan and on the nature of Late Weichselian–Holocene glacigenic sediment delivery to this region of the Baffin Bay margin. Glacigenic debris flows deposited on the upper slope and extending to at least 1800 m water depth in front of the trough‐mouth are related to the remobilization of subglacial debris that was delivered onto the upper slope at times when an ice stream was positioned at the shelf edge. In contrast, sedimentary facies from the northern sector of the fan are characterized by hemipelagic and ice‐rafted sediments and turbidites; glacigenic debris flows are notably absent in cores from this region. Quantitative X‐ray diffraction studies of the <2‐mm sediment fraction indicate that the bulk of the sediment in the fan is derived from Uummannaq Trough but there are distinct intervals when sediment from northern Baffin Bay sources dominates, especially on the northern limit of the fan. These data demonstrate considerable variation in the nature of sediment delivery across the Uummannaq Fan when the Greenland Ice Sheet was at the shelf edge. They highlight the variability of glacimarine depositional processes operating on trough‐mouth fans on high‐latitude continental margins during the last glacial maximum and indicate that glacigenic debris flows are just one of a number of mechanisms by which such large depocentres form. Copyright © 2012 John Wiley & Sons, Ltd.     

Outcrop-scale acoustic facies analysis and latest Quaternary development of Hueneme and Dume submarine fans, offshore California

The uppermost Quaternary deposits of the Hueneme and Dume submarine fans in the Santa Monica Basin have been investigated using a closed-spaced grid of boomer seismic-reflection profiles, which give vertical resolution of a few tens of centimetres with acoustic penetration to 50 m. Acoustic facies integrated with geometry define six architectural elements, some with discrete subelements that are of a scale that can be recognized in outcrops of ancient turbidite systems. In the Santa Monica Basin, the relationship of these elements to fan morphology, stratigraphy and sediment source is precisely known.
The width of upper Hueneme fan valley has been reduced from 5 km since the last glacial maximum to 1 km at present by construction of laterally confined sandy levees within the main valley. The middle fan comprises three main subelements: thick sand deposits at the termination of the fan valley, low-gradient sandy lobes typically 5 km long and < 10 m thick, and scoured lobes formed of alternating sand and mud beds with many erosional depressions. The site of thickest lobe sediment accumulation shifts through time, with each sand bed deposited in a previous bathymetric low (i.e. compensation cycles). The lower fan and basin plain consists of sheet-like alternations of sand and mud with shallow channels and lenses.
Variations in the rate of late Quaternary sea level rise initiated changes in sediment facies distribution. At lowstand, and during the approximately 11 ka stillstand in sea level, the Hueneme Fan was fed largely by hyperpycnal flow from the Santa Clara River delta, depositing high sediment waves on the right hand levee and thick sandy lobes on the middle fan. At highstand of sea level, most turbidity currents were generated by failure of silty prodelta muds. In contrast, the smaller Dume Fan was apparently always fed from littoral drift of sand through a single-canyon point source.     

Hybrid event bed character and distribution linked to turbidite system sub‐environments: The North Apennine Gottero Sandstone (north‐west Italy)

This study documents the character and occurrence of hybrid event beds (HEBs) deposited across a range of deep‐water sub‐environments in the Cretaceous–Palaeocene Gottero system, north‐west Italy. Detailed fieldwork (>5200 m of sedimentary logs) has shown that hybrid event beds are most abundant in the distal confined basin‐plain domain (>31% of total thickness). In more proximal sectors, hybrid event beds occur within outer‐fan and mid‐fan lobes (up to 15% of total thickness), whereas they are not observed in the inner‐fan channelized area. Six hybrid event bed types (HEB‐1 to HEB‐6) were differentiated mainly on basis of the texture of their muddier and chaotic central division (H3). The confined basin‐plain sector is dominated by thick (maximum 9·57 m; average 2·15 m) and tabular hybrid event beds (HEB‐1 to HEB‐4). Their H3 division can include very large substrate slabs, evidence of extensive auto‐injection and clast break‐up, and abundant mudstone clasts set in a sandy matrix (dispersed clay ca 20%). These beds are thought to have been generated by highly energetic flows capable of delaminating the sea floor locally, and carrying large rip‐up clasts for relatively short distances before arresting. The unconfined lobes of the mid‐fan sector are dominated by thinner (average 0·38 m) hybrid event beds (HEB‐5 and HEB‐6). Their H3 divisions are characterized by floating mudstone clasts and clay‐enriched matrices (dispersed clay >25%) with hydraulically fractionated components (mica, organic matter and clay flocs). These hybrid event beds are thought to have been deposited by less energetic flows that underwent early turbulence damping following incorporation of mud at proximal locations and by segregation during transport. Although there is a tendency to look to external factors to account for hybrid event bed development, systems like the Gottero imply that intrabasinal factors can also be important; specifically, the type of substrate available (muddy or sandy) and where and how erosion is achieved across the system producing specific hybrid event bed expressions and facies tracts.     

Sedimentary Response of Different Fan Types to the Paleogene–Neogene Basin Transformation in the Kuqa Depression, Tarim Basin, Xinjiang Province

A group of alluvial fans formed in the early Paleogene represent marginal sedimentary facies at the foot of the South Tianshan Mountain, Kuqa Depression, Tarim Basin, Xinjiang province. Two types of fans occurred in the middle–late Paleogene Kumugeliemu and Suweiyi formations: one alluvial, and the other fan delta deposited in a lacustrine setting. Within the early Neogene Jidike Formation, coastal subaqueous fans developed, probably in a deeper water lacustrine setting. The three types of fans are stacked vertically in outcrop with the sequence in ascending order: bottom alluvial, middle fan-delta, and top subaqueous. The subaqueous is a typical coarse-fan deposit occurring in the glutinite member of the Jidike Formation in some wells. Laterally, from the foreland to the lacustrine settings, the distribution pattern of sedimentary facies represents the same three fan types sequentially. The spatial distribution of these fans was controlled by the Paleogene–Neogene Basin transformation, and evolution with different types of fans developed in the Kuqa Depression in response. In the Paleogene, the Kuqa Depression was a rift basin where an alluvial fan was deposited in the foreland setting, which, by early Neogene, became a foreland basin when the lake level changed. With any rise in lake level, fan-deltas migrated from lacustrine to foreland settings, whereas when the lake level fell, fan migration was reversed. In the early Neogene, with increasing slope and rising lake level, fans progressed and covered the previous fan-delta and lacustrine mudstone. Eventually, subaqueous fans developed, forming the present spatial configuration of these three fan types.     

Architecture and sedimentology of the Kerinitis Gilbert‐type fan delta,Corinth Rift,Greece

The Kerinitis Delta in the Corinth Rift, Greece, is a footwall derived, coarse‐grained, Gilbert‐type fan delta deposited in the hangingwall of a linked normal fault system. This giant Gilbert‐type delta (radius 3·8 km, thickness > 600 m) was supplied by an antecedent river and built into a brackish to marine basin. Although as yet poorly dated, correlation with neighbouring deltas suggests that the Kerinitis Delta was deposited during a period of 500 to 800 ka in the Early to early Middle Pleistocene. Facies characterizing a range of depositional processes are assigned to four facies associations (topset, foreset, bottomset and prodelta). The dominantly fluvial topset facies association has locally developed shallow marine (limestone) and fluvial‐shoreface sub‐associations. This delta represents a subsidence‐dominated system in which high fault displacement overwhelmed base‐level falls (creation of accommodation predominantly ≥ 0). Stratal geometries and facies stacking patterns were used to identify 11 key stratal surfaces separating 11 stratal units. Each key stratal surface records a landward shift in the topset breakpoint path, indicating a rapid increase in accommodation/sediment supply. Each stratal unit records a gradual decrease in accommodation/sediment supply during deposition. The cyclic stratal units and key stratal surfaces are interpreted as recording eustatic falls and rises, respectively. A 30 m thick package of foresets below the main delta records the nucleation of a small Proto‐delta probably on an early relay ramp. Based on changes in stratal unit geometries, the main delta is divided into three packages, interpreted as recording the initiation, growth and death of the controlling fault system. The Lower delta comprises stacked, relatively thin, progradational stratal units recording low displacement on the young fault system (relay ramp). The Middle delta comprises vertically stacked stratal units, each recording initial aggradation–progradation followed by progradation; their aggradational component increases up through the Middle delta, which records the main phase of increasing rate of fault displacement. The Upper delta records pure progradation, recording abrupt cessation of movement on the fault. A major erosion surface incising basinward 120 m through the Lower and Middle delta records an exceptional submarine erosion process (canyon or delta collapse).