Expanding pools morphology in live-bed conditions

Sediment load plays a fundamental role in natural river morphology evolution. Therefore, the correct assessment of the role of the sediment load on natural or anthropic pools morphology downstream of river grade control structures, such as rock chute or block ramps, is of fundamental interest for preserving the fish habitat and the river morphology. This work presents an experimental study on the sediment load influence on rectangular expanding pools downstream of block ramps in live-bed conditions. Several longitudinal and transversal expanding ratios have been tested. Ramp slopes were varied between 0.083 and 0.25. The effect of the pool geometry and the sediment load on hydraulic jump downstream of block ramp as well as scour morphologies and flow patterns have been analyzed. Equations were derived to evaluate the maximum scour hole depth, the longitudinal distance of the section in which it occurs, and the maximum water elevations both in the pool and in the downstream contraction.     

Scour downstream of J-Hook vanes in straight horizontal channels

J-Hook vanes are grade control structures used to stabilize the riverbed. This paper aims to investigate the behaviour of J-Hook vanes as a grade-control structure in straight rivers. Scour downstream of J-Hook vane structures like other grade-control structures depends on the shape of the structure and the river hydraulic conditions. The purpose of this study is classifying the scour geometry and predicting the main scour parameters such as the scour depth, length, width, and the ridge height and length downstream of the J-Hook vanes in straight rivers. Experiments were carried out in a horizontal channel. For each length of the structure, three heights in different hydraulic conditions, including densimetric Froude numbers, water drops, and opening ratios, were tested. Results show that the densimetric Froude number, the drop height, and the height of the structure are the key parameters to form and classify the scour. Equations have been derived using dimensional analysis and experimental data to predict the maximum scour depth, the maximum length of the scour, the maximum scour width, and the maximum height and length of the dune. All the experiments were conducted in clear water conditions.     

Effects of hydraulic structures on river morphological processes

Study of hydraulic structures such as groins and bandal-like structures can provide valuable information on their influences on morphological processes in natural rivers.These structures usually used for bank protection and formation of deep navigation channel can locally create complex flow patterns,reduce flow velocities and also increase the flood levels.Most of the previous studies are focused on structures like groins under non-submerged flow condition.However,the recent demand of nature friendly low cost and sustainable methods for river bank protection and channel formation leads to the necessity of study different type of structures like bandal-like structures.In this context, this study investigates the flow characteristics and sediment transport process influenced by bandal-like structures through laboratory experiments.The experiments were carried out under live-bed scour condition with sediment supplied from the inlet for two submergence(non-submerged and submerged)conditions.The experimental measurements contribute to better understand the mechanism of deposition/erosion process around different type of hydraulic structures.The performance of bandal-like structures considering the erosion around the structures,the deposition near the bank and the formation of deep main channel show promising results compared with conventional structures such as groins(impermeable and permeable ones).     

Influence of large woody debris on sediment scour at bridge piers

Large woody debris(LWD) reduces the flow area,deviate the flow and increases the velocity in correspondence of the bridge pier,therefore increases the maximum scour hole depth and accelerates sediment removal.Logs and drifts accumulated on bridge piers are of different dimensions.According to logs characteristics and river morphology,drift accumulations can either extend downstream the bridge pier or they can accumulate totally upstream.This paper aims to analyze the effect of drift accumulation planimetry on bridge pier scour.The experimental investigation has been carried out at the PITLAB hydraulic centre of Civil Engineering Department,University of Pisa,Italy.Drift accumulation was characterized by different relative longitudinal lengths,flow area occlusions,length of longitudinal drift and downstream planimetrical positions relative to the pier center.The experimental investigation has been carried out in clear-water conditions.Several pier sizes,channel widths and sediment materials have been tested.Maximum scour hole in presence of drift accumulation have been compared to the maximum scour hole for an isolated pier.Finally,data were compared with previous literature findings,which highlight the effect of the downstream extension of drift accumulation on bridge pier scour.New relationships have been proposed to predict the effect of drift accumulation on bridge pier scour,both in terms of relative maximum scour and temporal scour evolution.     

Live-bed scour downstream of block ramps for low densimetric Froude numbers

Sediment load plays a major role in the morphological evolution of rivers.Therefore,the analysis of the sediment load interaction with hydraulic structures is of main importance in order to enhance the preservation of fish habitats and river morphological characteristics.The present study analyzes the scour mechanisms downstream of a block ramp in live bed conditions,when the sediment supplied by the approaching flow is balanced by the sediment transported out of the scour hole.Experiments were performed in a model flume and the effect of the approaching sediment concentration on the scour geometry was analyzed.It was observed that the scour features depend deeply on the approaching sediment concentration and four main profile configurations were distinguished.The experimental data were analyzed and empirical relationships were developed in order to evaluate the depth and length of a scour hole,the dune height and the distance of the transversal section of maximum dune height from the ramp toe for different hydraulic and geometric conditions.It was also proved that the dynamic equilibrium shape of a scour hole does not depend on the sediment load time history.     

Real‐time river bed scour monitoring and synchronous maximum depth data collected during Typhoon Soulik in 2013

A critical concern regarding river bed stabilization and river engineering is the short‐term general scour that occurs in a field setting far from a river‐crossing structure or embankment during a typhoon‐induced flood. This study investigated the improvement of existing techniques that have been used to measure river bed scour. One of these techniques is the numbered‐brick column or scour chains method, in which only the maximum general scour depth of river bed is observed. A wireless tracer for monitoring real‐time scour was set‐up with a numbered‐brick column and was employed to collect synchronous data. The proposed method was successfully used to observe both real‐time scour and the maximum depth at flood peak. This observation was conducted at a steep gravel‐bed reach of the Shuideliaw Embankment on the intermittent Choshui River in Central Taiwan during Typhoon Soulik, which occurred in 2013. Future studies must be conducted to complete the development of an automatic real‐time scour and flood monitoring system for use in severe weather and flow conditions; this would facilitate the identification of river bed scour during conditions of unstable flow and the improvement of flood prevention engineering, bridge closure detection and emergency evacuation procedures. Copyright © 2014 John Wiley & Sons, Ltd.     

Local scour around spur-dikes

Experimental investigations were conducted to study the effects of upstream flow conditions, sediment characteristics, and spur-dike's geometry on the maximum scour depth and scour pattern around a spur-dike. Dimensional analyses to find different non-dimensional terms affecting the phenomenon were obtained and verified with the help of the experimental data. An empirical formula for the maximum depth of scour was derived and found to be identical in form to the regime equations of Lacey and Blench.     

Wood retention at inclined racks: Effects on flow and local bedload processes

Large wood (LW) transport can increase greatly during floods, leading to accumulations at river infrastructures. To mitigate the potential flood hazard, racks are a common method to retain LW upstream of endangered settlements or infrastructures. The majority of LW retention racks consist of vertical bars and, therefore, disrupt bedload transport. It can be hypothesized that inclined racks reduce backwater rise and local scour, as wood will block the upper part of the rack, thereby increasing the open flow cross-section below the accumulation. Flume experiments were conducted under clear water conditions to analyse backwater rise and local scour as a function of (1) rack inclination, (2) hydraulic inflow condition, (3) uniform bed material, and (4) LW volume. In addition, the first experiments were performed under live bed scour conditions to study the effect of bedload transport on local scour and backwater rise. Based on the experiments, backwater rise and local scour decrease with decreasing rack angle to the horizontal. LW predominantly accumulated at the upper part of the rack, leading to an open flow cross-section below the accumulation. The effect of rack angle was included in existing design equations for backwater rise and local scour depth. In addition, the first experiments with bedload transport resulted in smaller backwater rise and local scour depth. This study contributes to an enhanced process understanding of wood retention and bedload transport at rack structures and an improved design of LW retention racks. © 2020 John Wiley & Sons, Ltd.     

Developing environmental standards for abstractions from UK rivers to implement the EU Water Framework Directive / Développement de standards environnementaux sur les prélèvements d'eau en rivière au Royaume Uni pour la mise en œuvre de la directive cadre sur l'eau de l'Union Européenne

Abstract

Under the European Union Water Framework Directive, Member States must put in place a river basin planning framework to determine what measures are necessary to maintain and improve the ecological status for all surface water bodies. The governmental organisations legally responsible for implementing the Directive in the UK have recognised that an appropriate river flow regime is fundamental to maintain a healthy river and, as a result, they need to regulate abstractions and effluent discharges and ensure sufficient water is released from impoundments. This paper reports on the process of producing environmental standards that define the maximum abstraction allowable from UK rivers, to leave sufficient flow to maintain a healthy river ecosystem. As there are currently insufficient data available to determine the relationships between river flow and ecological status empirically, expert knowledge was captured through a series of workshops at which leading UK freshwater scientists defined maximum levels of river flow regime alteration that would achieve ecological objectives for different river water body types. For the least ecologically sensitive rivers, maximum abstractions in the range 15–35% of the natural flow were proposed, depending on the flow magnitude and time of year. For the most sensitive rivers, the maximum abstraction proposed was in the range 7.5–25%. The knowledge was used by the responsible UK authorities to develop environmental standards. The authorities subsequently used the environmental standards to determine regulatory standards that could be implemented within practical constraints and current licensing policies.     

Temporal evolution of scour at bridge abutments in compound channels

Bridge abutment-induced sediment scour in compound river channels is time-sensitive during floods, and, thus, estimating the scour rate has significance in design. In the current study, large-scale laboratory experiments were done to examine the influence of multiple factors on scour evolution, including channel geometry, bed mobility (clear-water or live-bed), and lateral (embankment intrusion) and vertical (deck submergence) flow contractions. A new method is applied for scour measurement and determination of characteristic scour trends. Results show that the non-dimensional time scale is related to flow intensity and may peak before reaching the clear-water scour threshold; the corresponding equations also are derived. It is found that the use of scour countermeasures has a significant impact on the scour rate, and the existing equations for unprotected abutments have limitations. Under clear-water conditions, the scour rate is closely related to the overall flow contraction, which can be better reflected by the ratio of the approaching unit discharge to that at the bridge section. Specifically, the effect of vertical flow contraction on scour rate is more dominant than other factors. Two scour rate curves are derived to suit different structural and flow contraction types for clear-water scour. In contrast, the live-bed scour rate data are generally consistent and fall in a narrow band, showing less dependence on other factors. Finally, a new design approach is established to estimate the time scale and scour rate using the new equations proposed in this paper.     

Scour Downstream of Grade Control Structures under the Influence of Upward Seepage

The installation of free falling jet grade control structures has become a popular choice for river bed stabilization. However, the formation and development of scour downstream of the structure may lead to failure of the structure itself. The current approaches to scour depth prediction are generally based on studies conducted with the absence of upward seepage. In the present study, the effects of upward seepage on the scour depth were investigated. A total of 78 tests without and with the application of upward seepage were carried out using three different sediment sizes, three different tailwater depths, four different flow discharges, and four different upward seepage flow discharge rates. In some tests, the three-dimensional components of the flow velocity within the scour hole were measured for both the cases with and without upward seepage. The scour depth measured for the no-seepage results compared well with the most accurate relationship found in the literature. It was found that generally the upward seepage reduced the downward velocity components near the bed, which led to a decrease in the maximum scour depth. A maximum scour depth reduction of 49% was found for a minimum tailwater depth, small sediment size, and high flow discharge. A decay of the downward velocity vector within the jet impingement was found due to the upward seepage flow velocity. The well known equation of D’Agostino and Ferro was modified to account for the effect of upward seepage, which satisfactorily predicted the experimental scour depth, with a reasonable average error of 10.7%.     

Effects of submerged flexible vegetation and solid structure bars on channel bed scour

The effects of different submerged obstacle longitudinal bars with different arrangement densities on the flow profile and morphology of a scour hole were investigated under clear water conditions. Acoustic Doppler velocimetry(ADV) data were applied to plot the vertical distributions of three-dimensional velocities and turbulent contours.The experimental results indicate that arrangement density(also can represent porosity),structural material(flexible or solid),and the sidewall effect are the main factors impacting turbulent kinetic energy and the morphology of scour holes.For flexible vegetation,the maximum turbulent kinetic energy near the bed surface increased with the arrangement density.For the same structure,the depth and the magnitude of the lateral expansion of the scour hole also increased with the arrangement density.The flexible vegetation reduced the depth of the scour hole because of deflection and arrangement density.The larger volumes of scour found in the upstream and middle sections of solid structures compare well to those in flexible vegetation.The deflection of porous flexible vegetation transported the turbulent kinetic energy downstream,reduced the turbulent kinetic energy near the sediment bed,and increased the stability of the bars.Flexible vegetation bars are able to protect the bank and the bed of a river under normal conditions,making them a good alternative design in the management and restoration of rivers.     

Modelling time varying scouring at bed sills

In this paper a modelling approach is presented to predict local scour under time varying flow conditions. The approach is validated using experimental data of unsteady scour at bed sills. The model is based on a number of hypotheses concerning the characteristics of the flow hydrograph, the temporal evolution of the scour and the geometry of the scour hole. A key assumption is that, at any time, the scour depth evolves at the same rate as in an equivalent steady flow. The assumption is supported by existing evidence of geometrical affinity and similarity of scour holes formed under different steady hydraulic conditions. Experimental data are presented that show the scour hole development downstream of bed sills due to flood hydrographs follow a predictable pattern. Numerical simulations are performed with the same input parameters used in the experimental tests but with no post‐simulation calibration. Comparison between the experimental and model results indicates good correspondence, especially in the rising limb of the flow hydrograph. This suggests that the underlying assumptions used in the modelling approach are appropriate. In principle, the approach is general and can be applied to a wide range of environments (e.g. bed sills, step‐pool systems) in which scouring at rapid bed elevation changes caused by time varying flows occurs, provided appropriate scaling information is available, and the scour response to steady flow conditions can be estimated. Copyright © 2011 John Wiley & Sons, Ltd.     

Bridge pier scour mitigation under steady and unsteady flow conditions

Watercourse morphology is affected by local scouring when the flow interferes with anthropic structures. Controlling the scour hole size is of predominant importance to guarantee bridge safety as well as to limit the variations of river morphology. A combined countermeasure against bridge pier scour is proposed and tested in order to reduce the maximum scour depth and deviate it away from the bridge foundation. In the first part of the laboratory campaign, combination of two countermeasures (bed-sill and collar) was evaluated for a circular pier under clear-water and live-bed steady flow conditions. The proposed combined countermeasure exhibited an efficiency of about 64% in terms of scour depth reduction. Afterwards, it was tested in unsteady flow conditions, first for a circular pier, then in the case of a rectangular pier with round nose and tail, two circular in-line piers and two rectangular in-line piers, under a hydrograph with a peak flow velocity slightly above the threshold condition of sediment motion. Results showed that the combined countermeasure had an efficiency of about 63% for a single circular pier; however, higher efficiency (about 75%) was obtained in applications to rectangular pier and two in-line circular or rectangular piers.     

Experimental assessment and prediction of temporal scour depth around a spur dike

Spur dikes are river training structures that have been extensively used worldwide for towards enhancing flood control and the stability of embankments and riverbanks.However,scour around spur dikes can be a major problem affecting their stability and hydraulic performance.The precise computation of temporal scour depth at spur dikes is very important for the design of economical and safe spur dikes.This study focuses on experimentally assessing the temporal variation of scour depth around a vertical wall spur dike and identifying the parameters,which mostly influence spur dike performance for a channel bed surface comprised of sand-gravel mixtures.In the current study,the authors did physical experiments in a flume based study to obtain new data,aimed at deriving a new predictive model for spur dike scour and comparing its performance to others found in the literature.It was found that the dimensionless temporal scour depth variation increases with an increase in(i)the threshold velocity ratio,(ii)the densimetric Froude number of the bed surface sediment mixture,(iii)the flow shallowness(defined as the ratio of the approach flow depth,y,to the spur dike’s transverse length,l),and(iv)the flow depth-particle size ratio.It is also concluded that the temporal scour depth variation in the sediment mixture is influenced by the non-uniformity of sediment and decreases with an increase in the non-uniformity of the sediment mixture.A new mathematical model is derived for the estimation of temporal scour depths in sand-gravel sediment mixtures.The proposed equation has been calibrated and validated with the experimental data,demonstrating a good predictive capacity for the estimation of temporal scour depth evolution.     

SCOUR RATE FORMULA

I.INTRODUCTIONhiverchannelsaresubjecttocontinuouschangeingeometryduetoillteraCtionbetWeentheflowanderodibleboundaries.Ofconcerntothedesignersofoilpipelinesacrossariver,bridgesandhydraulicworksistheproblemofscourwhichcanunderminetheStructures.Scouratsiteofbridgesandhydraulicworksoccursduetoconstrictedflowandexistenceofbridgepiers.SuchatabOfscouroccursonlyinashortsection,usuallyillthesameorderofthelengthofthehydraulicworksorbridges.Therefore,thispatternofscouriscalledlocalscour.Man}rresea…     

Sediment mobility and bed armoring in the St Clair River: insights from hydrodynamic modeling

The lake levels in Lake Michigan‐Huron have recently fallen to near historical lows, as has the elevation difference between Lake Michigan‐Huron compared to Lake Erie. This decline in lake levels has the potential to cause detrimental impacts on the lake ecosystems, together with social and economic impacts on communities in the entire Great Lakes region. Results from past work suggest that morphological changes in the St Clair River, which is the only natural outlet for Lake Michigan‐Huron, could be an appreciable factor in the recent trends of lake level decline. A key research question is whether bed erosion within the river has caused an increase in water conveyance, therefore, contributed to the falling lake level. In this paper, a numerical modeling approach with field data is used to investigate the possibility of sediment movement in the St Clair River and assess the likelihood of morphological change under the current flow regime. A two‐dimensional numerical model was used to study flow structure, bed shear stress, and sediment mobility/armoring over a range of flow discharges. Boundary conditions for the numerical model were provided by detailed field measurements that included high‐resolution bathymetry and three‐dimensional flow velocities. The results indicate that, without considering other effects, under the current range of flow conditions, the shear stresses produced by the river flow are too low to transport most of the coarse bed sediment within the reach and are too low to cause substantial bed erosion or bed scour. However, the detailed maps of the bed show mobile bedforms in the upper St Clair River that are indicative of sediment transport. Relatively high shear stresses near a constriction at the upstream end of the river and at channel bends could cause local scour and deposition. Ship‐induced propeller wake erosion also is a likely cause of sediment movement in the entire reach. Other factors that may promote sediment movement, such as ice cover and dredging in the lower river, require further investigation. Copyright © 2012 John Wiley & Sons, Ltd.     

Flood hydrograph attenuation induced by a reservoir system: analysis with a distributed rainfall‐runoff model

Spatially distributed hydrologic models can be effectively utilized for flood event simulation over basins where a complex system of reservoirs affecting the natural flow regime is present. Flood peak attenuation through mountain reservoirs can, in fact, mitigate the impact of major floods in flood‐prone areas of the lower river valley. Assessment of this effect for a complex reservoir system is performed with a spatially distributed hydrologic model where the surface runoff formation and the hydraulic routing through each reservoir and the river system are performed at a fine spatial and time resolution. The Toce River basin is presented as a case study, because of the presence of 14 active hydroelectric dams that affect the natural flow regime. A recent extreme flood event is simulated using a multi‐realization kriging method for modelling the spatial distribution of rainfall. A sensitivity analysis of the key elements of the distributed hydrologic model is also performed. The flood hydrograph attenuation is assessed. Several possible reservoir storage conditions are used to characterize the initial condition of each reservoir. The results demonstrate how a distributed hydrologic model can contribute to defining strategies for reservoir management in flood mitigation. Copyright © 2004 John Wiley & Sons, Ltd.     

Clear-water scour around semi-elliptical abutments with armored beds

Experimental study has been carried out under a clear-water scour condition to explore the local scour around semi-elliptical model bridge abutments with armor-layer bed, compared with the local scour process around semi-circular abutment. Two types of model bridge abutments, namely semi-elliptical and semi-circular abutments have been used in this experimental study. The model abutments had a ratio of streamwise length of abutment to the length of abutment transverse to the flow of 2 for semi-circular abutments and 3 for semi-elliptical abutments. In total, 50 Experiments have been designed and conducted under different flow conditions such as bed shear velocities, flow depth, and dimensions of bridge abutment model, as well as grain size of the bed material. Based on these experiments, the scour process around bridge abutments has been assessed. The dependence of the equilibrium scour depth of the scour hole on hydraulic variables has been studied. Empirical equation describing the equilibrium scour depth of the scour hole around bridge abutments has been developed.     

Minimum froude number and the equilibrium of alluvial sand rivers

Rivers adjust towards an equilibrium condition, the stability of which depends upon a set of controlling factors expressed by the Froude number. As alluvial river channels approach stable conditions, the Froude number of the channel flow will tend to attain a minimum value which reflects minimum bed material motion and maximum channel stability, under the constraints imposed by water discharge, sediment load, and particle size. Computer simulations for sand bed rivers show that the Froude number of the flow tends to a minimum value when the equilibrium river tends to a certain hydraulic geometry. Evidence from 57 alluvial sand material rivers and stable canals shows that this simulated hydraulic geometry with minimum Froude number corresponds to the natural equilibrium state.