An interdisciplinary approach to reservoir characterisation; an example from the early to middle Eocene Kaimiro Formation,Taranaki Basin,New Zealand

The Kaimiro Formation is an early to middle Eocene, NE-SW trending reservoir fairway in Taranaki Basin, and comprises a range of coastal plain through to shallow marine facies. A time of regional transgression is observed across the Paleocene–Eocene transition, which is linked to a general global warming trend and to regional thermal relaxation-related subsidence in New Zealand. The earliest Eocene transgressive deposits pass upwards into a series of cyclically stacked packages, interpreted as 3rd and 4th order sequences. Maximum regression occurred within the early Eocene and was followed by punctuated retrogradational stacking patterns associated with shoreline retreat and subsequent regional transgression in the middle Eocene.The Kaimiro Formation is considered a good reservoir target along most of the reservoir fairway, which can largely be attributed to a consistently quartz-rich, lithic-poor composition and reasonably coarse sand grain size. Correlations demonstrate that within the early Eocene the main reservoir facies are channel-fill sandstones overlying candidate sequence boundaries in paleoenvironmentally landward (proximal) settings, and upper shoreface/shoreline sandstones in relatively basinward (distal) settings. Middle Eocene reservoir facies are not represented in distal wells due to overall transgression at this time, yet they form a significant target in more proximal well locations, particularly on the Taranaki Peninsula.Depositional facies is one of the principal controls on sandstone reservoir quality. However, while reservoir facies have been proven along the length of the reservoir fairway, it is evident that diagenesis has significantly impacted sandstone quality. Relatively poor reservoir properties are predicted for deeply buried parts of the basin (maximum burial >4.5 km) due to severe compaction and relatively abundant authigenic quartz and illite. In contrast, good reservoir properties are locally represented in reservoir facies where present-day burial depths are <4 km due to less severe compaction, cementation and illitisation. Within these beds (<4 km) the presence of locally occurring authigenic grain-coating chlorite (shallow marine facies) and/or well-developed secondary porosity are both favourable to reservoir quality, while pervasive kaolinite and/or carbonate are both detrimental to reservoir quality.These results illustrate how an interdisciplinary approach to regional reservoir characterisation are used to help reduce risk during prospect evaluation. Assessment of both reservoir distribution and quality is necessary and can be undertaken through integrated studies of facies, sequence stratigraphy, burial modelling and petrography.     

Structural and facies architecture of a diapir-related carbonate minibasin (lower and middle Jurassic,High Atlas,Morocco)

We report the structural geometry and facies architecture of a small diapir-related carbonate-dominated basin from the Jurassic rift of the Moroccan High Atlas. The Azag minibasin is a lozenge-shaped depocenter completely enclosed by tectonic boundaries that we interpret as welds after former salt anticlines or salt walls. The exposed ca. 3000 m-thick infill of the Azag minibasin is asymmetric; layers are tilted to the W defining a rollover geometry. Areally-restricted sedimentary discontinuities and wedges of growth strata near the basin margins indicate sedimentation contemporaneous with diapiric rise of a Triassic ductile layer. Facies evolution through the basin reflects local accommodation by salt withdrawal and regional events in the High Atlas rift. The early basin infill in the Sinemurian and Pliensbachian shows thickness variations indicative of low-amplitude halokinetic movements, with reduced exposed thicknesses compared to surrounding areas. The exposed Toarcian and Aalenian deposits are also reduced in thickness compared to areas outside the basin. Subsidence increased dramatically in the Bajocian-early Bathonian (?), the main phase of downbuilding, when over 2600 m of carbonates and shales accumulated at a rate > 0.5 mm/a in the depocentral area of the minibasin governed by W-directed salt expulsion. The stratigraphic units distinguished often show maximum thicknesses and deeper facies in the depocentral area, and rapidly change to shallower facies at the basin margins. The Bajocian carbonate facies assemblage of the minibasin include: reservoir facies as microbialite-coral reefs in the basin margins (formed during periods of strong diapir inflation and bathymetric relief), basin-expansive oolite bars (formed during episodes of subdued relief), and organic-rich, dark lime mudstones and shales that show source-rock characteristics. The Azag basin is a good analog for the exploration of salt-related carbonate plays in rifts and continental margins where source-rock and reservoir can form in a same minibasin.     

Seismic inversion as a predictive tool for porosity and facies delineation in Paleocene fluvial/lacustrine reservoirs,Melut Basin,Sudan

The Melut Basin is a rift basin in the interior Sudan linked to the Mesozoic-Cenozoic Central and Western African Rift System. The Paleocene Yabus Formation is the main reservoir deposited in heterogeneous fluvial/lacustrine environment. Delineation of channel sandstone from shale is a challenge in reservoir exploration and development. We demonstrate a detailed 3D quantitative seismic interpretation approach that integrates petrophysical properties derived from well logs analysis. A porosity transform of acoustic impedance inversion provided a link between elastic and rock properties. Thus, we used seismic porosity to discriminate between different facies with appropriate validation by well logs. At the basin scale, the results revealed lateral and vertical facies heterogeneity in the Melut Basin. Good reservoir quality is observed in the Paleocene Yabus Formation. The sand facies indicated high porosity (20%) corresponding to low acoustic impedance (20000–24000 g ft/(cm3.s)). However, lower quality reservoir is observed in the Cretaceous Melut Formation. The porosity of sand/shale facies is low (5%), corresponding to high acoustic impedance (29000–34000 g ft/(cm3.s)). This suggests that the Yabus Sandstone is potentially forming a better reservoir quality than Melut Formation. At the reservoir scale, we evaluated the facies quality of Yabus Formation subsequences using petrophysical analysis. The subsequences YB1 to YB3, YB4 to YB7 and YB8 to YB10 showed relatively similar linear regressions, respectively. The subsequence of YB4 to YB7 is considered the best reservoir with higher porosity (25%). However, subsequence YB1 to YB3 showed lower reservoir quality with higher shale volume (30%). This attributed to floodplain shale deposits in this subsequence. Similarly, the high porosity (20%) recognized in deeper subsequences YB6 to YB9 is due to clean sand facies. We learnt a lesson that appropriate seismic preconditioning, exhaustive petrophysical analysis and well log validation are important keys for improved reservoir quality prediction results in fluvial/lacustrine basins.     

Linking early diagenesis and sedimentary facies to sequence stratigraphy on a prograding oolitic wedge: The Bathonian of western France (Aquitaine Basin)

To improve the understanding of the distribution of reservoir properties along carbonate platform margins, the connection between facies, sequence stratigraphy, and early diagenesis of discontinuities along the Bathonian prograding oolitic wedge of the northeastern Aquitaine platform was investigated. Eight facies are distributed along a 50 km-outcropping transect in (1) toe-of-slope, (2) infralittoral prograding oolitic wedge, (3) platform margin (shoal), (4) open marine platform interior, (5) foreshore, and (6) terrestrial settings. The transition from shallow platform to toe-of-slope facies is marked in the field by clinoforms hundred of meters long. Carbonate production was confined to the shallow platform but carbonates were exported basinward toward the breakpoint where they cascaded down a 20–25° slope. Ooid to intraclast grainstones to rudstones pass into alternating marl-limestone deposits at an estimated paleodepth of 40–75 m. Three sea-level falls of about 10 m caused the formation of discontinuities corresponding to sequence boundaries. Along these discontinuities, erosional marine hardgrounds formed in a high-hydrodynamic environment at a water depth of less than 10 m, displaying isopachous fibrous cements and meniscus-type cements. The cements pass landward into meniscus and microstalactitic forms along the same discontinuities, which are characteristic of subaerial exposure. During the deposition of transgressive systems tracts, carbonate accumulation remained located mostly on the shallow platform. Energy level increased and carbonates were exported during the deposition of highstand systems tracts forming the infralittoral prograding oolitic wedge. During the deposition of lowstand systems tracts, carbonate production fell to near zero and intraclast strata, derived from the erosion of hardgrounds on the shallow platform, prograded basinward. Early diagenetic cements are related exclusively to discontinuities that are not found within the prograding wedge because of the continuous high sedimentation rate under lower hydrodynamic conditions. This absence of early cementation within the infralittoral prograding oolitic wedge was conducive to porosity conservation, making such features good targets for carbonate reservoir exploration. This study proposes a novel sequence stratigraphy model for oolitic platform wedges, including facies and early diagenesis features.     

Facies architecture and heterogeneity of the fluvial–aeolian reservoirs of the Sergi formation (Upper Jurassic), Recôncavo Basin,NE Brazil

The Sergi Formation (Upper Jurassic) represents the main hydrocarbon reservoir of the Recôncavo Basin, Brazil. The basal vertical facies succession of the Sergi Formation comprises reservoirs formed by a complex fluvio–aeolian–lacustrine interaction. Facies architecture and detailed petrophysical analysis of these reservoirs have enhanced the understanding of heterogeneity at a variety of scales and has allowed the development of predictive models that describes the range of styles of mixed fluvial–aeolian reservoirs. At megascopic scale, the reservoirs are predominantly composed of sand bodies deposited by fluvial channel and aeolian facies associations. Regional flooding surfaces and sequence boundaries are their main flow barriers. The regional flooding surfaces are composed of fine-grained sediments deposited by lacustrine facies associations and the sequence boundaries act as flow barriers due to mechanically infiltrated clays. Based on its geometrical relations, reservoirs linked to fluvial–aeolian–lacustrine interaction formed two types of reservoirs at macroscopic scale: (i) with good lateral continuity of aeolian packages and relatively simple stratigraphic correlation and (ii) of highly compartmentalized aeolian packages with complex stratigraphic correlation and truncation by fluvial deposits. Mesoscopic heterogeneity reflects lithofacies, sedimentary structures, and lamina-scale variability within aeolian and fluvial facies associations.     

Geometry and architectural associations of co-genetic debrite–turbidite beds in basin-margin strata, Carboniferous Ross Sandstone (Ireland): Applications to reservoirs located on the margins of structurally confined submarine fans

Co-genetic debrite–turbidite beds are most commonly found in distal basin-plain settings and basin margins. This study documents the geometry, architectural association and paleogeographic occurrence of co-genetic debrite–turbidite beds in the Carboniferous Ross Sandstone with the goal of reducing uncertainty in the interpretation of subsurface data in similarly shaped basins where oil and gas is produced.The Ross Sandstone of western Ireland was deposited in a structurally confined submarine basin. Two outcrops contain co-genetic debrite–turbidite beds: Ballybunnion and Inishcorker. Both of the exposures contain strata deposited on the margin of the basin. An integrated dataset was used to characterize the stratigraphy of the Ballybunnion exposure. The exposure is divided into lower, middle, and upper units. The lower unit contains laminated shale with phosphate nodules, structureless siltstone, convolute bedding/slumps, locally contorted shale, and siltstone turbidites. The middle unit contains co-genetic debrite–turbidite beds, siltstone turbidites, and structureless siltstone. Each co-genetic debrite–turbidite bed contains evidence that fluid turbulence and matrix strength operated alternately and possibly simultaneously during deposition by a single sediment-gravity-flow event. The upper unit contains thin-bedded sandy turbidites, amalgamated sandy turbidites, siltstone turbidites, structureless siltstone, and laminated shale. A similar vertical facies pattern is found at Inishcorker.Co-genetic debrite–turbidite beds are only found at the basin-margin. We interpret these distinct beds to have originated as sand-rich, fully turbulent flows that eroded muddy strata on the slope as well as interbedded sandstone and mudstone in axial positions of the basin floor forming channels and associated megaflute erosional surfaces. This erosion caused the axially dispersing flows to laterally evolve to silt- and clay-rich flows suspended by both fluid turbulence and matrix strength due to a relative increase in clay proportions and associated turbulence suppression. The flows were efficient enough to bypass the basin center/floor, physically disconnecting their deposits from coeval lobes, resulting in deposition of co-genetic debrite–turbidite beds on the basin margin. The record of these bypassing flows in axial positions of the basin is erosional surfaces draped by thin siltstone beds with organic debris.A detailed cross-section through the Ross Sandstone reveals a wedge of low net-to-gross, poor reservoir-quality strata that physically separates sandy, basin-floor strata from the basin margin. The wedge of strata is referred to as the transition zone. The transition zone is composed of co-genetic debrite–turbidite beds, structureless siltstone, slumps, locally contorted shale, and laminated shale. Using data from the Ross Sandstone, two equations are defined that predict the size and shape of the transition zone. The equations use three variables (thickness of basin-margin strata, thickness of coeval strata on the basin floor, and angle of the basin margin) to solve for width (w) and trajectory of the basinward side of the low net-to-gross wedge (β). Beta is not a time line, but a facies boundary that separates sandy basin floor strata from silty basin-margin strata. The transition zone is interpreted to exist on lateral and distal margins of the structurally confined basin.Seismic examples from Gulf of Mexico minibasins reveal a wedge of low continuity, low amplitude seismic facies adjacent to the basin margin. Strata in this wedge are interpreted as transition-zone sediments, similar to those in the Ross Sandstone. Besides defining the size and shape of the transition zone, the variables “w” and “β” define two important drilling parameters. The variable “w” corresponds to the minimum distance a well bore should be positioned from the lateral basin margin to intersect sandy strata, and “β” corresponds to the deviation (from horizontal) of the well bore to follow the interface between sandy and low net-to-gross strata. Calculations reveal that “w” and “β” are related to the relative amount of draping, condensed strata on the margin and the angle of the basin margin. Basins with shallowly dipping margins and relatively high proportions of draping, clay-rich strata have wider transition zones compared to basins with steeply dipping margins with little draping strata. These concepts can reduce uncertainty when interpreting subsurface data in other structurally confined basins including those in Gulf of Mexico, offshore West Africa, and Brunei.     

Tracking the last sea-level cycle: seafloor morphology and shallow stratigraphy of the latest Quaternary New Jersey middle continental shelf

Seafloor geomorphology and surficial stratigraphy of the New Jersey middle continental shelf provide a detailed record of sea-level change during the last advance and retreat of the Laurentide ice sheet (120 kyr B.P. to Present). A NW–SE-oriented corridor on the middle shelf between water depths of 40 m (the mid-shelf “paleo-shore”) and 100 m (the Franklin “paleo-shore”) encompasses 500 line-km of 2D Huntec boomer profiles (500–3500 Hz), an embedded 4.6 km² 3D volume, and a 490 km² swath bathymetry map. We use these data to develop a relative stratigraphy. Core samples from published studies also provide some chronological and sedimentological constraints on the upper <5 m of the stratigraphic succession.The following stratigraphic units and surfaces occur (from bottom to top): (1) “R”, a high-amplitude reflection that separates sediment >46.5 kyr old (by AMS ¹⁴C dating) from overlying sediment wedges; (2) the outer shelf wedge, a marine unit up to 50 m thick that onlaps “R”; (3) “Channels”, a reflection sub-parallel to the seafloor that incises “R”, and appears as a dendritic system of channels in map view; (4) “Channels” fill, the upper portion of which is sampled and known to represent deepening-upward marine sediments 12.3 kyr in age; (5) the “T” horizon, a seismically discontinuous surface that caps “Channels” fill; (6) oblique ridge deposits, coarse-grained shelly units comprised of km-scale, shallow shelf bedforms; and (7) ribbon-floored swales, bathymetric depressions parallel to modern shelf currents that truncate the oblique ridges and cut into surficial deposits.We interpret this succession of features in light of a global eustatic sea-level curve and the consequent migration of the coastline across the middle shelf during the last 120 kyr. The morphology of the New Jersey middle shelf shows a discrete sequence of stratigraphic elements, and reflects the pulsed episodicity of the last sea-level cycle. “R” is a complicated marine/non-marine erosional surface formed during the last regression, while the outer shelf wedge represents a shelf wedge emplaced during a minor glacial retreat before maximum Wisconsin lowstand (i.e., marine oxygen isotope stage 3.1). “Channels” is a widespread fluvial subarial erosion surface formed at the late Wisconsin glacial maximum 22 kyr B.P. The shoreline migrated back across the mid-shelf corridor non-uniformly during the period represented by “Channels” fill. Oblique ridges are relict features on the New Jersey middle shelf, while the ribbon-floored swales represent modern shelf erosion. There is no systematic relationship between modern seafloor morphology and the very shallowly buried stratigraphic succession.     

Prediction of diagenetic facies using well logs – A case study from the upper Triassic Yanchang Formation,Ordos Basin,China

Understanding diagenetic heterogeneity in tight sandstone reservoirs is vital for hydrocarbon exploration. As a typical tight sandstone reservoir, the seventh unit of the Upper Triassic Yanchang Formation in the Ordos Basin (Chang 7 unit), central China, is an important oil-producing interval. Results of helium porosity and permeability and petrographic assessment from thin sections, X-ray diffraction, scanning electron microscopy and cathodoluminescence analysis demonstrate that the sandstones have encountered various diagenetic processes encompassing mechanical and chemical compaction, cementation by carbonate, quartz, clay minerals, and dissolution of feldspar and lithic fragments. The sandstones comprise silt-to medium-grained lithic arkoses to feldspathic litharenites and litharenites, which have low porosity (0.5%–13.6%, with an average of 6.8%) and low permeability (0.009 × 10⁻³ μm² to 1.818 × 10⁻³ μm², with an average of 0.106 × 10⁻³ μm²).This study suggests that diagenetic facies identified from petrographic observations can be up-scaled by correlation with wire-line log responses, which can facilitate prediction of reservoir quality at a field-scale. Four diagenetic facies are determined based on petrographic features including intensity of compaction, cement types and amounts, and degree of dissolution. Unstable and labile components of sandstones can be identified by low bulk density and low gamma ray log values, and those sandstones show the highest reservoir quality. Tightly compacted sandstones/siltstones, which tend to have high gamma ray readings and relatively high bulk density values, show the poorest reservoir quality. A model based on principal component analysis (PCA) is built and show better prediction of diagenetic facies than biplots of well logs. The model is validated by blind testing log-predicted diagenetic facies against petrographic features from core samples of the Upper Triassic Yanchang Formation in the Ordos Basin, which indicates it is a helpful predictive model.     

Generation of Upwelling near the Pacific Coast of Mexico

In a series of numerical experiments, we simulate the process of generation of coastal upwelling induced by the winds of various directions in the central part of the Pacific Coast of Mexico (18–24°N, 103– 107°W). The numerical nonlinear multilevel model [see E. N. Mikhailova, I. M. Semenyuk, and N. B. Shapiro, “ Modeling of the variability of hydrophysical fields in the Tropical Atlantic,” Izv. Akad. Nauk SSSR, Fiz. Atmosf. Okean., 27, No. 10, 1139–1148 (1991)] is adapted to the region of investigations with 9-km space resolution by specifying the conditions of flow through the open lateral boundaries. The results of numerical experiments demonstrate that the NW, N, NE, and E winds are especially favorable for the generation of intense upwelling.__________Translated from Morskoi Gidrofizicheskii Zhurnal, No. 1, pp. 32–41, January–February, 2005.     

Controls on reservoir quality in exhumed basins – an example from the Ordovician sandstone,Illizi Basin,Algeria

Petroleum exploration in many North African intracratonic basins targets Early Paleozoic sandstones as the primary reservoir objective. These sandstones are often characterized by highly variable reservoir quality (0.0001–1000 mD), and the ability to predict and selectively target areas of enhanced porosity and permeability is crucial to unlock the hydrocarbon potential. The objective of this study is to characterize the primary controls on reservoir quality in an Ordovician field in the Illizi Basin of Algeria through detailed core and petrographic analysis, and establish if variations in thermal history across the field have a material impact on reservoir quality. The best reservoir quality is observed in facies where primary intergranular porosity has been preserved in fine to coarse grained quartzarenites with less than 1% fibrous illite. These lithologies are most commonly found within the high-energy, tidally reworked, post-glacial facies sandstones of the uppermost Ordovician succession. Observed differences in quartz cement volume within compositionally and texturally similar samples from the southern and northern parts of the field are interpreted to reflect variations in thermal exposure due to deeper burial. This interpretation is supported by field-wide numerical modelling of sandstone diagenesis. This study indicates that subtle variations in thermal history can have a material impact on the spatial trends in reservoir permeability. Thermal history, therefore, is an important consideration in reservoir quality studies in exhumed basins where variations in present-day burial depth will be a poor guide for evaluating reservoir quality risk across a basin or play.     

The role of diagenesis and depositional facies on pore system evolution in a Triassic outcrop analogue (SE Spain)

This study aims at unravelling the diagenetic history and its effect on the pore system evolution of the Triassic redbeds exposed in SE Spain (TIBEM¹), an outcrop analogue of the TAGI (Trias Argilo-Gréseux Inférieur) reservoir (Berkine-Ghadames Basin, Algeria). Similar climatic, base level and tectonic conditions of aforementioned alluvial formations developed analogue fluvial facies stacking patterns. Furthermore, interplay of similar detrital composition and depositional facies in both formations resulted in analogue early diagenetic features. Petrographic observations indicate lithic subarkosic (floodplain facies) and subarkosic (braidplain facies) compositions which are considered suitable frameworks for potential reservoir rocks. Primary porosity is mainly reduced during early diagenesis through moderate mechanical compaction and formation of K-feldspar overgrowth, gypsum, dolomite and phyllosilicate cements. Early mesodiagenesis is testified by low chemical compaction and quartz cementation. Telodiagenetic calcite filling fractures and K-feldspar dissolution determined the final configuration of analysed sandstones. Mercury injection-capillary pressure technique reveals overbank deposits in the floodplain as the least suitable potential reservoirs because of their lowest open porosity (OP < 16%), permeability (k < 5 mD) and small dimensions. On the other hand, braidplain deposits show the highest values of such properties (OP up to 31.6% and k > 95 mD) and greater thickness and lateral continuity, so being considered the best potential reservoir. The accurate estimation of TIBEM microscale attributes can provide important input for appraisal and enhanced oil recovery performance in TAGI and in others reservoirs consisting on similar fluvial sandy facies.     

Nearshore retention of upwelled waters north and south of Point Reyes (northern California)—Patterns of surface temperature and chlorophyll observed in CoOP WEST

Retentive embayments can be found near capes in upwelling regions, where they stand out as relatively warm features with higher chlorophyll a concentrations than surrounding waters. Within the area of the “Wind Events and Shelf Transport” study site (WEST) from the Gulf of the Farallones to Point Arena (37.5–39°N and 122.5–124°W), we describe two retentive embayments, extending approximately 20 km north of Point Reyes, and 30 km south of Point Reyes in the northern Gulf of the Farallones. These areas are identifiable from chlorophyll a (SeaWiFS) and sea-surface temperature (MODIS) satellite radiometry. Additional data from moorings and drifters were used to further characterize these retentive features. The persistence of these features is on time scales between 2 and 10 days, determined from time-series analysis of mooring data for chlorophyll and temperature. The alongshore wind stress is negatively correlated with chlorophyll and temperature mooring values. The time scale of persistence of these retentive features was similar to both the upwelling-relaxation timescale and the timescale of phytoplankton bloom development. The WEST region is notable in that the spring and summer is subject to the strongest wind stress along the US west coast, yet the coastal waters are highly productive. Based on our observations, we suggest that the apparent persistence of high biomass coastal waters in this strongly advective and wind-dominated system may be partially explained by the presence of retentive features identified in this study.     

The “separation formula” and its application to the Pacific Ocean

The “separation formula”, a new method for computing the adiabatic inter-hemispheric meridional transport, is applied to the Pacific Ocean. The method involves an integration of the wind stress along a “horseshoe” path. It begins at the separation point of the East Australian Current, continues eastward across the ocean, progresses northward along the continental boundary, and then turns back westward across the ocean to the separation point of the Kuroshio. Since the Pacific is closed on the northern side, such an integration gives the wind-driven Indonesian throughflow.The analytical formulas show that, in order for the adiabatic wind-driven throughflow to exist, it is necessary that there be an asymmetry in the winds associated with the two zonal cross-sections connecting the (northern and southern) separation points in the west to the continents in the east. It turns out that these asymmetries in the Pacific are relatively small and, consequently, do not allow for a significant (i.e. more than one Sverdrup) Indonesian transport. Specifically, in the Pacific, this wind-driven transport is directed to the south, implying a very small net Indian-to-Pacific transport rather than a Pacific-to-Indian transport. The adiabatic model fails, therefore, to explain the observed Pacific-to-Indian throughflow of 5-6 Sv.When an upwelling is added to the model (to simulate diabatic processes), then one obtains the result that all the water upwelled in the Pacific must exit the Pacific via the Indonesian seas, i.e. the wind field is effectively blocking the oceanic region between Australia and South America, forcing the upwelled water into the Indian Ocean. This model suggests, therefore, that the observed Pacific-to-Indian throughflow is a measure of the upwelling in the Pacific.     

Wasp-waist populations and marine ecosystem dynamics: Navigating the “predator pit” topographies

Many marine ecosystems exhibit a characteristic “wasp-waist” structure, where a single species, or at most several species, of small planktivorous fishes entirely dominate their trophic level. These species have complex life histories that result in radical variability that may propagate to both higher and lower trophic levels of the ecosystem. In addition, these populations have two key attributes: (1) they represent the lowest trophic level that is mobile, so they are capable of relocating their area of operation according to their own internal dynamics; (2) they may prey upon the early life stages of their predators, forming an unstable feedback loop in the trophic system that may, for example, precipitate abrupt regime shifts. Experience with the typical “boom-bust” dynamics of this type of population, and with populations that interact trophically with them, suggests a “predator pit” type of dynamics. This features a refuge from predation when abundance is very low, very destructive predation between an abundance level sufficient to attract interest from predators and an abundance level sufficient to satiate available predators, and, as abundance increases beyond this satiation point, decreasing specific predation mortality and population breakout. A simple formalism is developed to describe these dynamics. Examples of its application include (a) a hypothetical mechanism for progressive geographical habitat expansion at high biomass, (b) an explanation for the out-of-phase alternations of abundances of anchovies and sardines in many regional systems that appear to occur without substantial adverse interactions between the two species groups, and (c) an account of an interaction of environmental processes and fishery exploitation that caused a regime shift. The last is the example of the Baltic Sea, where the cod resource collapsed in concert with establishment of dominance of that ecosystem by the cod’s ‘wasp-waist” prey, herring and sprat.     

An ichnological-assemblage approach to reservoir heterogeneity assessment in bioturbated strata: Insights from the Lower Cretaceous Viking Formation,Alberta, Canada

Facies-scale trends in porosity and permeability are commonly mapped for reservoir models and flow simulation; however, these trends are too broad to capture bed and bed-set heterogeneity, and there is a need to up-scale detailed, bed-scale observations, especially in low-permeability reservoir intervals. Here we utilize sedimentology and ichnology at the bed- and bedset-scale to constrain the range of porosity and permeability that can be expected within facies of the Lower Cretaceous Viking Formation of south-central, Alberta, Canada.Three main facies were recognized, representing deposition from the middle shoreface to the upper offshore. Amalgamated, hummocky cross-stratified sandstone facies (Facies S_HCS) consist of alternations between intensely bioturbated beds and sparsely bioturbated/laminated beds. Trace fossil assemblages in bioturbated beds of Facies S_HCS are attributable to the archetypal Skolithos Ichnofacies, and are morphologically characterized by vertical, sand-filled shafts (VSS). Bioturbated beds show poor reservoir properties (max: 10% porosity, mean: 85.1 mD) compared to laminated beds (max 20% porosity, mean: 186 mD). Bioturbated muddy sandstone facies (Facies S_B) represent trace fossil assemblages primarily attributable to the proximal expression of the Cruziana Ichnofacies. Four ichnological assemblages occur in varying proportions, namely sediment-churning assemblages (SC), horizontal sand-filled tube assemblages (HSF), VSS assemblages, and mud-filled, lined, or with spreiten (MLS) assemblages. Ichnological assemblages containing horizontal (max: 30% porosity, mean: 1.28 mD) or vertical sand-filled burrows (max: 10% porosity, mean: 2.2 mD) generally have better reservoir properties than laminated beds (max: 20% porosity, mean: 0.98 mD). Conversely, ichnological assemblages that consist of muddy trace fossils have lower porosity and permeability (max 10% porosity, mean: 0.89 mD). Highly bioturbated, sediment churned fabrics have only slightly higher porosity and permeability overall (max: 15% porosity, mean: 1.29 mD). Bioturbated sandy mudstone facies (Facies M_B) contain ichnofossils representing an archetypal expression of the Cruziana Ichnofacies. Four ichnological assemblages occur throughout Facies M_B that are similar to Facies S_B; SC, HSF, VSS, and MLS assemblages. The SC (max: 15% porosity, mean: 21.67 mD), HSF (max: 20% porosity, mean: 3.79 mD), and VSS (max: 25% porosity, mean: 7.35 mD) ichnological assemblages have similar or slightly lower values than the laminated beds (max: 20% porosity, mean: 10.7 mD). However, MLS assemblages have substantially lower reservoir quality (max: 10% porosity, mean: 0.66 mD).Our results indicate that the most likely occurrence of good reservoir characteristics in bioturbated strata exists in sand-filled ichnological assemblages. This is especially true within the muddy upper offshore to lower shoreface, where vertically-oriented trace fossils can interconnect otherwise hydraulically isolated laminated sandstone beds; this improves vertical fluid transmission. The results of this work largely corroborate previous findings about ichnological impacts on reservoir properties. Unlike previous studies, however, we demonstrate that the characteristics of the ichnological assemblage, such as burrow form and the nature of burrow fill, also play an important role in determining reservoir characteristics. It follows that not all bioturbated intervals (attributed to the same facies) should be treated equally. When upscaling bed-scale observations to the reservoir, a range of possible permeability-porosity values can be tested for model sensitivity and to help determine an appropriate representative elementary volume.     

Verification of sediment transport rate parameter on cross-shore sediment transport analysis

The sediment transport parameter helps determining the amount of sediment transport in cross-shore direction. The sediment transport parameter therefore, should represent the effect of necessary environmental factors involved in cross-shore beach profile formation. However, all the previous studies carried out for defining shape parameter consider the parameter as a calibration value. The aim of this study is to add the effect of wave climate and grain size characteristics in the definition of transport rate parameter and thus witness their influence on the parameter. This is achieved by taking the difference in between “the equilibrium wave energy dissipation rate” and “the wave energy dissipation rate” to generate a definition for the bulk of sediment, dislocating within a given time interval until the beach tends reach an equilibrium conditions. The result yields that empirical definition of transport rate parameter primarily governs the time response of the beach profile. Smaller transport rate value gives a longer elapsed time before equilibrium is attained on the beach profile. It is shown that any significant change in sediment diameter or wave climate proportionally increases the value of the shape parameter. However, the effect of change in wave height or period on sediment transport parameter is not as credit to as mean sediment characteristics.     

A three-dimensional high-resolution reservoir model of the Eocene Shahejie Formation in Bohai Bay Basin,integrating stratigraphic forward modeling and geostatistics

Reservoir characterization based on geostatistics method requires well constraints (e.g. seismic data with high quality) to predict inter-well reservoir quality that is conformed to geological laws. Nevertheless, the resolution of seismic data in multiple basins or reservoirs is not high enough to recognize the distribution of different types of sand bodies. In this paper, we propose a new method to improve the precision of reservoir characterization: reservoir modeling with the constrains of sedimentary process model and sedimentary microfacies. We employed stratigraphic forward modeling, a process-based method, to constrain the reservoir modeling in one oil-bearing interval of the third member of Eocene Shahejie Formation in J-Oilfield of Liaoxi Sag, Bohai Bay Basin.We divide reservoir modeling into two orders using different types of constrains. In the first order, we use the simulated shale model from stratigraphic forward model that is corrected by wells data as a 3D trend volume to constrain the reservoir sand-shale modeling. In the second order, different types of sedimentary microfacies in the sandy part of the model are further recognized and simulated within the constrains of sedimentary microfacies maps. Consequently, the porosity, permeability and oil saturation are modeled under the control of precise sedimentary microfacies model. The high-resolution reservoir model shows that the porosity, permeability and oil saturation of distributary channel is generally above 20%, 10md and 50%, respectively, which are much higher than that of other types of sedimentary microfacies. It can be concluded that comparing to other types of sedimentary facies, distributary channel has better physical properties and more oil accumulation in the fan-delta front and therefore is the most favorable zones for petroleum development in the research area.     

A turbidity survey of Narragansett Bay

A turbidity survey of Narragansett Bay, Rhode Island, was made during the summer months of 1971 and included measurements of the attenuation function for scalar irradiance for daylight and the volume attenuation function for white tungsten light at various depths. One hundred and three stations were made at 17 different locations. Variations in the optical parameters were large, one standard deviation at any given location ranging from 7 to 23 per cent of the mean value. This variation was only slightly dependent on the state of the tidal currents, depth of the location, or weather factors. The magnitude of turbidity variations was almost 4-fold over a north-south range of 31 km within the estuary, with clearest water at the southern mouths of the Bay. A good correlation exists between turbidity parameters and Autumn values of suspended-material concentration found by Morton (1967), with both data sets showing highest turbidity and suspended concentrations in the West Passage of the Bay. “Wedges” and “bulges” of clear water were detected throughout the Bay but were most evident at the southern (Atlantic Ocean) end.Although it was not possible to fully define the parameters producing these temporal and geographic variations in estuarine turbidity, it is suggested that knowledge of these parameters can assist those concerned with the physical and biological state of an estuary, as well as divers and photographers plying their trades within its boundaries.     

River flooding, storm resuspension, and event stratigraphy on the northern California shelf: observations compared with simulations

Coast-hugging surface flood plumes occur on the inner shelf of northern California during the winter season, generating dense, near-bottom suspensions which may attain fluid mud concentrations as particles settle. The period of storm-heightened waves may continue into the flood period, leading to gravity-driven seaward displacement of the bottom suspension; or the wave regime may ameliorate, leaving the suspension to consolidate as a short-lived, inner-shelf flood bed. Such beds tend to be resuspended within days or weeks by subsequent storm events that may recreate the original high concentrations. The sediment is thus dispersed seaward by gravity flows, to be deposited as a muddy flood bed on the central shelf. The locus of deposition of these “high-concentration regimes” is a function of the relative intensities of river discharge and storm wave height. Greater discharge piles thicker storm beds nearer shore, while intense wave regimes allow deposition of the fluid mud further seaward. During events with high values of both parameters, large amount of fluid mud may bypass over the shelf edge. In contrast, “low-concentration regimes” occur during storm periods when there has been no recent flood deposition on the inner shelf. The shelf floor is better consolidated than in the previous case, and the resulting suspended sediment concentrations are lower. As a consequence, low-concentration regimes are winnowing and bypassing regimes, and the beds deposited are thinner and sandier. Algorithms describing deposition by high and low-concentration regimes have been embedded in a probabilistic model. A simulation of a 400-year sequence of beds deposited by winter storms and floods suggests that on the Eel shelf, the Holocene transgressive systems tract consists of back-stepping, seaward-fining event beds, whose timelines (bedding planes) dip more gently than do their gradational facies boundaries. At these longer time scales, flood beds dominate over storm beds.