Effect of post-seismic deformation on earth orientation parameter estimates from VLBI observations: a case study at Gilcreek, Alaska

Earth orientation parameters (EOPs) provide a link between the International Celestial Reference Frame (ICRF) and the International Terrestrial Reference Frame (ITRF). Natural geodynamic processes, such as earthquakes, can cause the motion of stations to become discontinuous and/or non-linear, thereby corrupting the EOP estimates if the sites are assumed to move linearly. The VLBI antenna at the Gilcreek Geophysical Observatory has undergone non-linear, post-seismic motion as a result of the M_w=7.9 Denali earthquake in November 2002, yet some VLBI analysts have adopted co-seismic offsets and a linear velocity model to represent the motion of the site after the earthquake. Ignoring the effects of the Denali earthquake leads to error on the order of 300–600 μas for the EOP, while modelling the post-seismic motion of Gilcreek with a linear velocity generates errors of 20–50 μas. Only by modelling the site motion with a non-linear function is the same level of accuracy of EOP estimates maintained. The effect of post-seismic motion on EOP estimates derived from the International VLBI Service IVS-R1 and IVS-R4 networks are not the same, although changes in network geometries and equipment improvements have probably affected the estimates more significantly than the earthquake-induced deformation at Gilcreek.     

EOP and scale from continuous VLBI observing: CONT campaigns to future VGOS networks

Continuous (CONT) VLBI campaigns have been carried out about every 3 years since 2002. The basic idea of these campaigns is to acquire state-of-the-art VLBI data over a continuous time period of about 2 weeks to demonstrate the highest accuracy of which the current VLBI system is capable. In addition, these campaigns support scientific studies such as investigations of high-resolution Earth rotation, reference frame stability, and daily to sub-daily site motions. The size of the CONT networks and the observing data rate have increased steadily since 1994. Performance of these networks based on reference frame scale precision and polar motion/LOD comparison with global navigation satellite system (GNSS) earth orientation parameters (EOP) has been substantially better than the weekly operational R1 and R4 series. The precisions of CONT EOP and scale have improved by more than a factor of two since 2002. Polar motion precision based on the WRMS difference between VLBI and GNSS for the most recent CONT campaigns is at the 30 \(\upmu \)as level, which is comparable to that of GNSS. The CONT campaigns are a natural precursor to the planned future VLBI observing networks, which are expected to observe continuously. We compare the performance of the most recent CONT campaigns in 2011 and 2014 with the expected performance of the future VLBI global observing system network using simulations. These simulations indicate that the expected future precision of scale and EOP will be at least 3 times better than the current CONT precision.     

Earth orientation parameters estimated from VLBI during the CONT11 campaign

In this paper we investigate the accuracy of the earth orientation parameters (EOP) estimated from the continuous VLBI campaign CONT11. We first estimated EOP with daily resolution and compared these to EOP estimated from GNSS data. We find that the WRMS differences are about 31  $\upmu $ as for polar motion and 7  $\upmu $ s for length of day. This is about the precision we could expect, based on Monte Carlo simulations and the results of the previous CONT campaigns. We also estimated EOP with hourly resolution to study the sub-diurnal variations. The results confirm the results of previous studies, showing that the current IERS model for high-frequency EOP variations does not explain all the sub-diurnal variations seen in the estimated time series. We then compared our results to various empirical high-frequency EOP models. However, we did not find that any of these gave any unambiguous improvement. Several simulations testing the impact of various aspects of, e.g. the observing network were also made. For example, we made simulations assuming that all CONT11 stations were equipped with fast VLBI2010 antennas. We found that the WRMS error decreased by about a factor five compared to the current VLBI system. Furthermore, the simulations showed that it is very important to have a homogenous global distribution of the stations for achieving the highest precision for the EOP.     

Monte Carlo simulations of the impact of troposphere,clock and measurement errors on the repeatability of VLBI positions

Within the International VLBI Service for Geodesy and Astrometry (IVS) Monte Carlo simulations have been carried out to design the next generation VLBI system (“VLBI2010”). Simulated VLBI observables were generated taking into account the three most important stochastic error sources in VLBI, i.e. wet troposphere delay, station clock, and measurement error. Based on realistic physical properties of the troposphere and clocks we ran simulations to investigate the influence of the troposphere on VLBI analyses, and to gain information about the role of clock performance and measurement errors of the receiving system in the process of reaching VLBI2010’s goal of mm position accuracy on a global scale. Our simulations confirm that the wet troposphere delay is the most important of these three error sources. We did not observe significant improvement of geodetic parameters if the clocks were simulated with an Allan standard deviation better than 1 × 10⁻¹⁴ at 50 min and found the impact of measurement errors to be relatively small compared with the impact of the troposphere. Along with simulations to test different network sizes, scheduling strategies, and antenna slew rates these studies were used as a basis for the definition and specification of VLBI2010 antennas and recording system and might also be an example for other space geodetic techniques.     

The 2008 DGFI realization of the ITRS: DTRF2008

A new realization of the International Terrestrial System was computed at the ITRS Combination Centre at DGFI as a contribution to ITRF2008. The solution is labelled DTRF2008. In the same way as in the DGFI computation for ITRF2005 it is based on either normal equation systems or estimated parameters derived from VLBI, SLR, GPS and DORIS observations by weekly or session-wise processing. The parameter space of the ITRS realization comprises station positions and velocities and daily resolved Earth Orientation Parameters (EOP), whereby for the first time also nutation parameters are included. The advantage of starting from time series of input data is that the temporal behaviour of geophysical parameters can be investigated to decide whether the parameters can contribute to the datum realization of the ITRF. In the same way, a standardized analysis of station position time series can be performed to detect and remove discontinuities. The advantage of including EOP in the ITRS realization is twofold: (1) the combination of the coordinates of the terrestrial pole—estimated from all contributing techniques—links the technique networks in two components of the orientation, leading to an improvement of consistency of the Terrestrial Reference Frame (TRF) and (2) in their capacity as parameters common to all techniques, the terrestrial pole coordinates enhance the selection of local ties as they provide a measure for the consistency of the combined frame. The computation strategy of DGFI is based on the combination of normal equation systems while at the ITRS Combination Centre at IGN solutions are combined. The two independent ITRS realizations provide the possibility to assess the accuracy of ITRF by comparison of the two frames. The accuracy evaluation was done separately for the datum parameters (origin, orientation and scale) and the network geometry. The accuracy of the datum parameters, assessed from the comparison of DTRF2008 and ITRF2008, is between 2–5?mm and 0.1–0.8?mm/year depending on the technique. The network geometry (station positions and velocities) agrees within 3.2?mm and 1.0?mm/year. A comparison of DTRF2008 and ITRF2005 provides similar results for the datum parameters, but there are larger differences for the network geometry. The internal accuracy of DTRF2008—that means the level of conservation of datum information and network geometry within the combination—was derived from comparisons with the technique-only multi-year solutions. From this an internal accuracy of 0.32?mm for the VLBI up to 3.3?mm for the DORIS part of the network is found. The internal accuracy of velocities ranges from 0.05?mm/year for VLBI to 0.83?mm/year for DORIS. The internal consistency of DTRF2008 for orientation can be derived from the analysis of the terrestrial pole coordinates. It is estimated at 1.5–2.5?mm for the GPS, VLBI and SLR parts of the network. The consistency of these three and the DORIS network part is within 6.5?mm.     

Combined Earth orientation parameters based on homogeneous and continuous VLBI and GPS data

The CONT02 campaign is of great interest for studies combining very long baseline interferometry (VLBI) with other space-geodetic techniques, because of the continuously available VLBI observations over 2 weeks in October 2002 from a homogeneous network. Especially, the combination with the Global Positioning System (GPS) offers a broad spectrum of common parameters. We combined station coordinates, Earth orientation parameters (EOPs) and troposphere parameters consistently in one solution using technique- specific datum-free normal equation systems. In this paper, we focus on the analyses concerning the EOPs, whereas the comparison and combination of the troposphere parameters and station coordinates are covered in a companion paper in Journal of Geodesy. In order to demonstrate the potential of the VLBI and GPS space-geodetic techniques, we chose a sub-daily resolution for polar motion (PM) and universal time (UT). A consequence of this solution set-up is the presence of a one-to-one correlation between the nutation angles and a retrograde diurnal signal in PM. The Bernese GPS Software used for the combination provides a constraining approach to handle this singularity. Simulation studies involving both nutation offsets and rates helped to get a deeper understanding of this singularity. With a rigorous combination of UT1–UTC and length of day (LOD) from VLBI and GPS, we showed that such a combination works very well and does not suffer from the systematic effects present in the GPS-derived LOD values. By means of wavelet analyses and the formal errors of the estimates, we explain this important result. The same holds for the combination of nutation offsets and rates. The local geodetic ties between GPS and VLBI antennas play an essential role within the inter-technique combination. Several studies already revealed non-negligible discrepancies between the terrestrial measurements and the space-geodetic solutions. We demonstrate to what extent these discrepancies propagate into the combined EOP solution.     

On the consistency of the current conventional EOP series and the celestial and terrestrial reference frames

Precise transformation between the celestial reference frames (CRF) and terrestrial reference frames (TRF) is needed for many purposes in Earth and space sciences. According to the Global Geodetic Observing System (GGOS) recommendations, the accuracy of positions and stability of reference frames should reach 1 mm and 0.1 mm year\(^{-1}\), and thus, the Earth Orientation Parameters (EOP) should be estimated with similar accuracy. Different realizations of TRFs, based on the combination of solutions from four different space geodetic techniques, and CRFs, based on a single technique only (VLBI, Very Long Baseline Interferometry), might cause a slow degradation of the consistency among EOP, CRFs, and TRFs (e.g., because of differences in geometry, orientation and scale) and a misalignment of the current conventional EOP series, IERS 08 C04. We empirically assess the consistency among the conventional reference frames and EOP by analyzing the record of VLBI sessions since 1990 with varied settings to reflect the impact of changing frames or other processing strategies on the EOP estimates. Our tests show that the EOP estimates are insensitive to CRF changes, but sensitive to TRF variations and unmodeled geophysical signals at the GGOS level. The differences between the conventional IERS 08 C04 and other EOP series computed with distinct TRF settings exhibit biases and even non-negligible trends in the cases where no differential rotations should appear, e.g., a drift of about 20 \(\upmu \)as year\(^{-1 }\)in \(y_{\mathrm{pol }}\) when the VLBI-only frame VTRF2008 is used. Likewise, different strategies on station position modeling originate scatters larger than 150 \(\upmu \)as in the terrestrial pole coordinates.     

Methodology for the combination of sub-daily Earth rotation from GPS and VLBI observations

A combination procedure of Earth orientation parameters from Global Positioning System (GPS) and Very Long Baseline Interferometry (VLBI) observations was developed on the basis of homogeneous normal equation systems. The emphasis and purpose of the combination was the determination of sub-daily polar motion (PM) and universal time (UT1) for a long time-span of 13 years. Time series with an hourly resolution and a model for tidal variations of PM and UT1-TAI (dUT1) were estimated. In both cases, 14-day nutation corrections were estimated simultaneously with the ERPs. Due to the combination procedure, it was warranted that the strengths of both techniques were preserved. At the same time, only a minimum of de-correlating or stabilizing constraints were necessary. Hereby, a PM time series was determined, whose precision is mainly dominated by GPS observations. However, this setup benefits from the fact that VLBI delivered nutation and dUT1 estimates at the same time. An even bigger enhancement can be seen for the dUT1 estimation, where the high-frequency variations are provided by GPS, while the long term trend is defined by VLBI. The estimated combined tidal PM and dUT1 model was predominantly determined from the GPS observations. Overall, the combined tidal model for the first time completely comprises the geometrical benefits of VLBI and GPS observations. In terms of root mean squared (RMS) differences, the tidal amplitudes agree with other empirical single-technique tidal models below 4 μas in PM and 0.25 μs in dUT1. The noise floor of the tidal ERP model was investigated in three ways resulting in about 1 μas for diurnal PM and 0.07 μs for diurnal dUT1 while the semi-diurnal components have a slightly better accuracy.     

The impact of celestial pole offset modelling on VLBI UT1 intensive results

Very Long Baseline Interferometry (VLBI) Intensive sessions are scheduled to provide operational Universal Time (UT1) determinations with low latency. UT1 estimates obtained from these observations heavily depend on the model of the celestial pole motion used during data processing. However, even the most accurate precession- nutation model, IAU 2000/2006, is not accurate enough to realize the full potential of VLBI observations. To achieve the highest possible accuracy in UT1 estimates, a celestial pole offset (CPO), which is the difference between the actual and modelled precession-nutation angles, should be applied. Three CPO models are currently available for users. In this paper, these models have been tested and the differences between UT1 estimates obtained with those models are investigated. It has been shown that neglecting CPO modelling during VLBI UT1 Intensive processing causes systematic errors in UT1 series of up to 20 μas. It has been also found that using different CPO models causes the differences in UT1 estimates reaching 10 μas. Obtained results are applicable to the satellite data processing as well.     

Is there utility in rigorous combinations of VLBI and GPS Earth orientation parameters?

Combinations of station coordinates and velocities from independent space-geodetic techniques have long been the standard method to realize robust global terrestrial reference frames (TRFs). In principle, the particular strengths of one observing method can compensate for weaknesses in others if the combination is properly constructed, suitable weights are found, and accurate co-location ties are available. More recently, the methodology has been extended to combine time-series of results at the normal equation level. This allows Earth orientation parameters (EOPs) to be included and aligned in a fully consistent way with the TRF. While the utility of such multi-technique combinations is generally recognized for the reference frame, the benefits for the EOPs are yet to be quantitatively assessed. In this contribution, which is a sequel to a recent paper on co-location ties (Ray and Altamimi in J Geod 79(4–5): 189–195, 2005), we have studied test combinations of very long baseline interferometry (VLBI) and Global Positioning System (GPS) time-series solutions to evaluate the effects on combined EOP measurements compared with geophysical excitations. One expects any effect to be small, considering that GPS dominates the polar motion estimates due to its relatively dense and uniform global network coverage, high precision, continuous daily sampling, and homogeneity, while VLBI alone observes UT1-UTC. Presently, although clearly desirable, we see no practical method to rigorously include the GPS estimates of length-of-day variations due to significant time-varying biases. Nevertheless, our results, which are the first of this type, indicate that more accurate polar motion from GPS contributes to improved UT1-UTC results from VLBI. The situation with combined polar motion is more complex. The VLBI data contribute directly only very slightly, if at all, with an impact that is probably affected by the weakness of the current VLBI networks (small size and sparseness) and the quality of local ties relating the VLBI and GPS frames. Instead, the VLBI polar motion information is used primarily in rotationally aligning the VLBI and GPS frames, thereby reducing the dependence on co-location tie information. Further research is needed to determine an optimal VLBI-GPS combination strategy that yields the highest quality EOP estimates. Improved local ties (including internal systematic effects within the techniques) will be critically important in such an effort.     

Global optimization of core station networks for space geodesy: application to the referencing of the SLR EOP with respect to ITRF

We apply global optimization in order to optimize the referencing (and consequently the stability) of the Earth Orientation Parameters (EOP) with respect to ITRF2005. These EOP are derived at a daily sampling from SLR data, simultaneously with weekly station positions. The EOP referencing is carried out with minimum constraints applied weekly to the three rotations and over core station networks. Our approach is based on a multi objective genetic algorithm, a particular stochastic global optimization method, the reference system effects being the objectives to minimize. We thus use rigorous criteria for the optimal weekly core station selection. The results evidence an improvement of 10% of the stability for Polar Motion (PM) series in comparison to the results obtained with the network specially designed for EOP referencing by the Analysis Working Group of the International Laser Ranging Service. This improvement of nearly 25 μas represents 50% of the current precision of the IERS 05 C04 PM reference series. We also test the possibility of averaging the weekly networks provided by our algorithm (the Genetically Modified Networks—GMN) over the whole time period. Although the dynamical nature of the GMN is clearly a key point of their success, we can derive such a global mean core network, which could be useful for practical applications regarding EOP referencing. Using this latter core network moreover provides more stable EOP series than the conventional network does.     

International VLBI Service for Geodesy and Astrometry

The International VLBI Service for Geodesy and Astrometry (IVS) regularly produces high-quality Earth orientation parameters from observing sessions employing extensive networks or individual baselines. The master schedule is designed according to the telescope days committed by the stations and by the need for dense sampling of the Earth orientation parameters (EOP). In the pre-2011 era, the network constellations with their number of telescopes participating were limited by the playback and baseline capabilities of the hardware (Mark4) correlators. This limitation was overcome by the advent of software correlators, which can now accommodate many more playback units in a flexible configuration. In this paper, we describe the current operations of the IVS with special emphasis on the quality of the polar motion results since these are the only EOP components which can be validated against independent benchmarks. The polar motion results provided by the IVS have improved continuously over the years, now providing an agreement with IGS results at the level of 20–25 \(\upmu \)as in a WRMS sense. At the end of the paper, an outlook is given for the realization of the VLBI Global Observing System.     

Radio source instability in VLBI analysis

The source position time-series for many of the frequently observed radio sources in the NASA geodetic very long baseline interferometry (VLBI) program show systematic linear and non-linear variations of as much as 0.5 mas (milli-arc-seconds) to 1.0 mas, due mainly to source structure changes. In standard terrestrial reference frame (TRF) geodetic solutions, it is a common practice to only estimate a global source position for each source over the entire history of VLBI observing sessions. If apparent source position variations are not modeled, they produce corresponding systematic variations in estimated Earth orientation parameters (EOPs) at the level of 0.02–0.04 mas in nutation and 0.01–0.02 mas in polar motion. We examine the stability of position time-series of the 107 radio sources in the current NASA geodetic source catalog since these sources have relatively dense observing histories from which it is possible to detect systematic variations. We consider different strategies for handling source instabilities where we (1) estimate the positions of unstable sources for each session they are observed, or (2) estimate spline parameters or rate parameters for sources chosen to fit the specific variation seen in the position-time series. We found that some strategies improve VLBI EOP accuracy by reducing the biases and weighted root mean square differences between measurements from independent VLBI networks operating simultaneously. We discuss the problem of identifying frequently observed unstable sources and how to identify new sources to replace these unstable sources in the NASA VLBI geodetic source catalog.     

A VLBI Delay Model for Radio Sources at a Finite Distance

A relativistic delay model for Earth-based very long baseline interferometry (VLBI) observation of sources at finite distances is derived. The model directly provides the VLBI delay in the scale of terrestrial time. The effect of the curved wave front is represented by using a pseudo source vector K = (R ₁ + R ₂)/(R ₁ + R ₂), and the variation of the baseline vector due to the difference of arrival time is taken into account up to the second-order by using Halley’s method. The precision of the new VLBI delay model is 1 ps for all radio sources above 100 km altitude from the Earth’s surface in Earth-based VLBI observation. Simple correction terms (parallax effect) are obtained, which can also adopt the consensus model (e.g. International Earth Rotation and Reference Frames Service conventions) to finite-distance radio source at R > 10 pc with the same precision. The new model may enable estimation of distance to the radio source directly with VLBI delay data.     

Consistent realization of Celestial and Terrestrial Reference Frames

The Celestial Reference System (CRS) is currently realized only by Very Long Baseline Interferometry (VLBI) because it is the space geodetic technique that enables observations in that frame. In contrast, the Terrestrial Reference System (TRS) is realized by means of the combination of four space geodetic techniques: Global Navigation Satellite System (GNSS), VLBI, Satellite Laser Ranging (SLR), and Doppler Orbitography and Radiopositioning Integrated by Satellite. The Earth orientation parameters (EOP) are the link between the two types of systems, CRS and TRS. The EOP series of the International Earth Rotation and Reference Systems Service were combined of specifically selected series from various analysis centers. Other EOP series were generated by a simultaneous estimation together with the TRF while the CRF was fixed. Those computation approaches entail inherent inconsistencies between TRF, EOP, and CRF, also because the input data sets are different. A combined normal equation (NEQ) system, which consists of all the parameters, i.e., TRF, EOP, and CRF, would overcome such an inconsistency. In this paper, we simultaneously estimate TRF, EOP, and CRF from an inter-technique combined NEQ using the latest GNSS, VLBI, and SLR data (2005–2015). The results show that the selection of local ties is most critical to the TRF. The combination of pole coordinates is beneficial for the CRF, whereas the combination of \(\varDelta \hbox {UT1}\) results in clear rotations of the estimated CRF. However, the standard deviations of the EOP and the CRF improve by the inter-technique combination which indicates the benefits of a common estimation of all parameters. It became evident that the common determination of TRF, EOP, and CRF systematically influences future ICRF computations at the level of several \(\upmu \)as. Moreover, the CRF is influenced by up to \(50~\upmu \)as if the station coordinates and EOP are dominated by the satellite techniques.     

Accuracy assessment of the National Geodetic Survey’s OPUS-RS utility

OPUS-RS is a rapid static form of the National Geodetic Survey’s On-line Positioning User Service (OPUS). Like OPUS, OPUS-RS accepts a user’s GPS tracking data and uses corresponding data from the U.S. Continuously Operating Reference Station (CORS) network to compute the 3-D positional coordinates of the user’s data-collection point called the rover. OPUS-RS uses a new processing engine, called RSGPS, which can generate coordinates with an accuracy of a few centimeters for data sets spanning as little as 15 min of time. OPUS-RS achieves such results by interpolating (or extrapolating) the atmospheric delays, measured at several CORS located within 250 km of the rover, to predict the atmospheric delays experienced at the rover. Consequently, standard errors of computed coordinates depend highly on the local geometry of the CORS network and on the distances between the rover and the local CORS. We introduce a unitless parameter called the interpolative dilution of precision (IDOP) to quantify the local geometry of the CORS network relative to the rover, and we quantify the standard errors of the coordinates, obtained via OPUS-RS, by using functions of the form

ΔVLBI用于“嫦娥一号”地月转移轨道段定轨及EOP解算

推导了基于相对论时空理论的"嫦娥一号"地月转移轨道段差分VLBI(ΔVLBI)的数学模型,在此基础上利用"嫦娥一号"实测的VLBI时延观测量和模拟的河外射电源时延观测量组成了ΔVLBI时延观测量,在参数最优先验精度下解算了不同弧段长度的"嫦娥一号"轨道及地球定向参数(EOP)等未知参数,并根据各参数的解算精度及外符合程度确定了最优观测弧段长度,并分析了该条件下的参数解算精度。     

Atmospheric loading corrections at the observation level in VLBI analysis

This paper investigates whether in very long baseline interferometry (VLBI) analysis atmospheric loading corrections should be applied a priori at the observation level or whether it is sufficient to correct for atmospheric loading effects a posteriori by adding constant values per session to the estimated station coordinates. Simulated observations at single stations corresponding to the precise point positioning approach of global navigation satellite systems show that the atmospheric loading effect can be fully recovered by a posteriori corrections, i.e., the height differences between both approaches stay well below 1 mm. However, real global VLBI network solutions with sessions from 1984 to 2008 reveal that the effect of neglected atmospheric loading corrections at the stations is distributed to the other stations in the network, thus resulting in station height differences between solutions with observation level and with a posteriori corrections which can be as large as 10 mm and a ‘damping’ effect of the corrections. As soon as the terrestrial reference frame and the corresponding coordinate time series are determined, it would be conceptually wrong to apply atmospheric loading corrections at the VLBI stations. We recommend the rigorous application of atmospheric loading corrections at the observation level to all stations of a VLBI network because the seven parameters for translation, rotation, and in particular the network-scale of VLBI networks are significantly affected.     

Height bias and scale effect induced by antenna gravitational deformations in geodetic VLBI data analysis

The impact of signal path variations (SPVs) caused by antenna gravitational deformations on geodetic very long baseline interferometry (VLBI) results is evaluated for the first time. Elevation-dependent models of SPV for Medicina and Noto (Italy) telescopes were derived from a combination of terrestrial surveying methods to account for gravitational deformations. After applying these models in geodetic VLBI data analysis, estimates of the antenna reference point positions are shifted upward by 8.9 and 6.7 mm, respectively. The impact on other parameters is negligible. To simulate the impact of antenna gravitational deformations on the entire VLBI network, lacking measurements for other telescopes, we rescaled the SPV models of Medicina and Noto for other antennas according to their size. The effects of the simulations are changes in VLBI heights in the range [−3, 73] mm and a net scale increase of 0.3–0.8 ppb. The height bias is larger than random errors of VLBI position estimates, implying the possibility of significant scale distortions related to antenna gravitational deformations. This demonstrates the need to precisely measure gravitational deformations of other VLBI telescopes, to derive their precise SPV models and to apply them in routine geodetic data analysis.     

Stability of the determination of earth rotation parameters (ERP) from VLBI

The observations of theIRIS network are used to study the stability of the determination ofERP fromVLBI. It is concluded that the uncertainties in the initial values ofERP, the errors of other parameters and analyst noise are at the same level as the formal errors in the determination ofERP. The geometric effect on the determination ofERP is important and gives rise to systematic errors. The geometric effect on polar motion is greate than onUT1, and much greater for the continental network. The stability of the determination ofERP fromVLBI can be improved either by creating new stations at reasonable locations in a network or by creating new networks. At last a comparison is provided between the determinations ofERP from theIRIS andTEMPO networks.