阿克苏气象局VPN备份网络建设

VPN网络是构建在Internet上的虚拟专线网络,成本低廉,使用安全简便.本文介绍了VPN技术,阿克苏气象局VPN备份网络的设计思路、配置方法及安全防范措施.VPN技术的应用,使气象信息传输方式变得更为灵巧.     

浅淡VPN虚拟专网技术及其应用

在计算机网络技术和信息科技对社会经济发展起着关键作用的今天,各类用户对网络服务及其应用的要求愈来愈高,一种成本更低、使用更灵活的虚拟专网(VPN)在这一市场环境中应运而生。本文简要介绍了VPN的原理、优势、结构及实现技术,并对构建VPN提出了指导方案。     

VPN技术在气象业务网络中的试用

通过对VPN技术的初步理解,结合中国气象局信息网络"十、五"发展计划,设计一套远程分支机构之间实现VPN的接入方案.     

ICEFLOWVPN系统在气象行业得到成功应用

2003年，上海冰峰网络公司为成都市气象局提供的ICEFLOW VPN(虚拟专用网)系统，通过ADSL等全动态IP接入，将成都市气象局及各区县局构建为网状结构的全联通VPN网络，实现了整个气象局的内部联网。相对于一般的VPN网络而言，冰峰网络公司所提供的ICEFLOW VPN解决方案的最大特点是具有良好的性能价格比。其系统特点如下：     

VPN技术在气象业务网络中的试用

通过对VPN技术的初步理解，结合中国气象局信息网络“十、五”发展计划，设计一套远程分支机构之间实现VPN的接入方案。     

双中心双云的DM VPN设计

针对拥有几百个分支机构的企业网络环境,其多个分支机构间需要安全可靠的通信,采用DM VPN这个高扩展性的IPSec VPN 解决方案,部署VPN隧道加密企业网络通信.DM VPN技术可以直接将分支机构的通信加密,不需要经过中心机构的转发,为中小型企业网络的互联节省了成本,在提高网络的可用性与安全性的同时也使得应用和管理更加简易.     

VPN与Internet可同时使用的方法

在多数情况下用户发现只要连接上VPN,原本正常的网络浏览、FTP等访问Internet通讯都被中断,断开VPN后又恢复正常,说明不能同时使用2个网络。笔者通过分析研究,找到解决问题的方法,实现VPN与Internet同时连接使用。     

组建VPN虚拟专用网络实例

介绍了组建VPN虚拟专用网的的方法。     

SSL VPN技术在贵州省气象信息网络通信中的应用

该文介绍了贵州省气象信息SSL VPN网络的建设以及该网络部署后的功能和优点。通过该VPN的建设对远程接入贵州省气象信息内部网络的用户,实现统一管理和控制,极大的提高了网络安全性。     

巧用Windows 2000 server的VPN和路由功能

利用Windows 2000 server操作系统中提供的VPN服务器和路由功能,向电信部门申请一条有固定IP登陆公网的线路,可建立一个VPN服务器,从而利用公网传输信息资料。     

Summer dryness in a warmer climate: a process study with a regional climate model

Earlier GCM studies have expressed the concern that an enhancement of greenhouse warming might increase the occurrence of summer droughts in mid-latitudes, especially in southern Europe and central North America. This could represent a severe threat for agriculture in the regions concerned, where summer is the main growing season. These predictions must however be considered as uncertain, since most studies featuring enhanced summer dryness in mid-latitudes use very simple representations of the land-surface processes ("bucket" models), despite their key importance for the issue considered. The current study uses a regional climate model including a land-surface scheme of intermediate complexity to investigate the sensitivity of the summer climate to enhanced greenhouse warming over the American Midwest. A surrogate climate change scenario is used for the simulation of a warmer climate. The control runs are driven at the lateral boundaries and the sea surface by reanalysis data and observations, respectively. The warmer climate experiments are forced by a modified set of initial and lateral boundary conditions. The modifications consist of a uniform 3 K temperature increase and an attendant increase of specific humidity (unchanged relative humidity). This strategy maintains a similar dynamical forcing in the warmer climate experiments, thus allowing to investigate thermodynamical impacts of climate change in comparative isolation. The atmospheric CO ₂ concentration of the sensitivity experiments is set to four times its pre-industrial value. The simulations are conducted from March 15 to October 1st, for 4 years corresponding to drought (1988), normal (1986, 1990) and flood (1993) conditions. The numerical experiments do not present any great enhancement of summer drying under warmer climatic conditions. First, the overall changes in the hydrological cycle (especially evapotranspiration) are of small magnitude despite the strong forcing applied. Second, precipitation increases in spring lead to higher soil water recharge during this season, compensating for the enhanced soil moisture depletion occurring later in the year. Additional simulations replacing the plant control on transpiration with a bucket-type formulation presented increased soil drying in 1988, the drought year. This suggests that vegetation control on transpiration might play an important part in counteracting an enhancement of summer drying when soil water gets limited. Though further aspects of this issue would need investigating, our results underline the importance of land-surface processes in climate integrations and suggest that the risk of enhanced summer dryness in the region studied might be less acute than previously assumed, provided the North American general circulation does not change markedly with global warming.     

Continental vegetation as a dynamic component of a global climate model: a preliminary assessment

A simplified vegetation distribution prediction scheme is used in combination with the Biosphere-Atmosphere Transfer Scheme (BATS) and coupled to a version of the NCAR Community Climate Model (CCM1) which includes a mixed-layer ocean. Employed in an off-line mode as a diagnostic tool, the scheme predicts a slightly darker and slightly rougher continental surface than when BATS' prescribed vegetation classes are used. The impact of tropical deforestation on regional climates, and hence on diagnosed vegetation, differs between South America and S.E. Asia. In the Amazon, the climatic effects of removing all the tropical forest are so marked that in only one of the 18 deforested grid elements could the new climate sustain tropical forest vegetation whereas in S.E. Asia in seven of the 9 deforested elements the climate could continue to support tropical forest. Following these off-line tests, the simple vegetation scheme has been coupled to the GCM as an interactive (or two-way) submodel for a test integration lasting 5.6 yr. It is found to be a stable component of the global climate system, producing only ~ 3% (absolute) interannual changes in the predicted percentages of continental vegetation, together with globally-averaged continental temperature increases of up to + 1.5 °C and evaporation increases of 0 to 5 W m^–2 and no discernible trends over the 67 months of integration. On the other hand, this interactive land biosphere causes regional-scale temperature differences of ± 10 °C and commensurate disturbances in other climatic parameters. Tuning, similar to the q-flux schemes used for ocean models, could improve the simulation of the present-day surface climate but, in the longer term, it will be important to focus on predicting the characteristics of the continental surface rather than simple vegetation classes. The coupling scheme will also have to allow for vegetation responses occurring over longer timescales so that the coupled system is buffered from sudden shocks.     

Numerical analysis of a thermotopographically-induced mesoscale circulation in a mountain basin using a non-hydrostatic model

Summary The boundary-layer wind field during weak synoptic conditions is largely controlled by the nature of the landscape. Mesoscale (sub-synoptic) circulations result from horizontal gradients of sensible heat flux due to variation in local topography, variation in surface-cover, and discontinuities such as land-sea contrasts. Such flows are usually referred to as thermally-driven circulations, and are diurnal in nature and often predictable. In this paper we use a state-of-the-art non-hydrostatic computer model to shed light on the physical mechanisms that drive a persistent easterly wind that develops in the afternoon in the Mackenzie Basin, New Zealand. The easterly – Canterbury Plains Breeze (CPB) – is observed early in the afternoon and is often intense, with mean wind speeds reaching up to 12 m s⁻¹. Although computer modelling in mountainous terrain is extremely challenging, the model is able to simulate this circulation satisfactorily. To further investigate the mechanisms that generate the Canterbury Plains Breeze, two additional idealized model experiments are performed. With each experiment, the effects of the synoptic scale wind and the ocean around the South Island, New Zealand were successively removed. The results show that contrary to previous suggestions, the Canterbury Plains Breeze is not an intrusion of the coastal sea breeze or the Canterbury north-easterly, but can be generated by heating of the basin alone. This conclusion highlights the importance of mountain basins and saddles in controlling near-surface wind regimes in complex terrain.     

A cold air lake formation in a basin — a simulation with a mesoscale numerical model

Summary A formation of a cold air lake in a basin is studied with a mesometeorological model.A dynamic Boussinesq hydrostatic mesoscale numerical model is developed in a staggered orthogonal grid with a horizontal resolution of 1 km and with a varying vertical grid. The topography is presented in a block shape so that computation levels are horizontal.The mesometeorological model is tested in three idealized topography cases (a valley, a single mountain, a basin) and test results are discussed.In an alpine basin surrounded by mountains and plateaus the air is supposed to be stagnant at the beginning of the night. Due to differences in radiation cooling an inversion layer is formed in the basin and local wind circulation is studied by model simulations.With 14 Figures     

Effects of a Fence on Pollutant Dispersion in a Boundary Layer Exposed to a Rural-to-Urban Transition

Simultaneous particle-image velocimetry and laser-induced fluorescence combined with large-eddy simulations are used to investigate the flow and pollutant dispersion behaviour in a rural-to-urban roughness transition. The urban roughness is characterized by an array of cubical obstacles in an aligned arrangement. A plane fence is added one obstacle height h upstream of the urban roughness elements, with three different fence heights considered. A smooth-wall turbulent boundary layer with a depth of 10h is used as the approaching flow, and a passive tracer is released from a uniform line source 1h upstream of the fence. A shear layer is formed at the top of the fence, which increases in strength for the higher fence cases, resulting in a deeper internal boundary layer (IBL). It is found that the mean flow for the rural-to-urban transition can be described by means of a mixing-length model provided that the transitional effects are accounted for. The mixing-length formulation for sparse urban canopies, as found in the literature, is extended to take into account the blockage effect in dense canopies. Additionally, the average mean concentration field is found to scale with the IBL depth and the bulk velocity in the IBL.     

Evaporation from a blanket bog in a foggy coastal environment

Frequent fog severely restricts evaporation from blanket bogs in Newfoundland because it more than halves the radiant energy input, and it eliminates the vapor pressure deficit, resulting in evaporation at the equilibrium rate (average = 0.99 during fog). During these periods, there is no surface resistance to evaporation because the bog has been wetted by fog drip, and although the latent heat flux dominates over sensible heat (average = 0.8), both are small. In contrast, the surface dries during clear periods, increasing the surface resistance to evaporation so that sensible heat becomes more important ( = 1.05). When the mosses are dry, evaporation is below the equilibrium rate ( = 0.87), although the higher available energy ensures that actual evaporation is higher. During clear periods, daily evaporation averaged 2.5 mm, compared to 1.1 and 0.7 mm for fog and rain, respectively. The suppressed evaporation at this site is important in maintaining appropriate hydrological conditions for blanket bog development.     

Parameterization of a momentum source in a tropical cumulus ensemble

Summary An eddy effect of tropical deep convection on the large-scale momentum, resp vorticity budget is investigated. The process is specified by a simple parameterization approach which is based on a concept of rotating clouds exerting a momentum on the large-scale flow. The cloud rotation is associated with the thermal properties of a cloud ensemble by the principle of conservation of potential vorticity. A decomposition of cloud classes is applied in consistency with the thermodynamical parameterization scheme of Arakawa and Schubert (1974).The parameterization is tested with observations of GATE74, Phase III. The data are processed on a B/C-scale grid (55km) in a region within 9N and 16N, and between 21W and 27W, and with a vertical resolution of 41 levels. The parameterization results correspond to the observed patterns, especially in situations with strong large-scale wind shear. The findings suggest that certain large-scalle flow regimes provoke convective scale momentum generation rather than redistributing large-scale momentum by convective circulations.With 10 Figures     

Spatial structure of a jet flow at a river mouth

The present work concentrates on the latest data measured in the Jordan river flow in lake Kinneret. Spectral characteristics of fluctuating velocity components have been obtained and processed. The three-dimensional structure of turbulence along the flow has been described. The main features of the jet flow turbulence in the river mouth are: a) The supply of turbulent energy changes due to different mechanisms along the flow. b) The structure of turbulence formed in the river decays rapidly along the flow, and c) In the sand area and beyond it, a significant generation of turbulent energy occurs. Quantitative estimations of the above effects were carried out.     

Atmospheric dispersion of a heavier-than-air gas near a two-dimensional obstacle

Flow over a two-dimensional obstacle and dispersion of a heavier-than-air gas near the obstacle were studied. Two species, one representing air and the other representing the heavier-than-air gas were treated. Equations for mass and momentum were cast in mass-averaged form, with turbulent Reynolds stresses and mass fluxes modeled using eddy-viscosity and diffusivity hypotheses. A two-equation k- turbulence model was used to determine the effective turbulent viscosity. Streamline curvature and buoyancy corrections were added to the basic turbulence formulation. The model equations were solved using finite difference techniques. An alternating-direction-implicit (ADI) technique was used to solve the parabolic transport equations and a direct matrix solver was used to solve the elliptic pressure equation.Mesh sensitivities were investigated to determine the optimum mesh requirements for the final calculations. It was concluded that at least 10 grid spaces were required across the obstacle width and 15 across the obstacle height to obtain valid solutions. A non-uniform mesh was used to concentrate the grid points at the top of the obstacle.Experimental measurements were made with air flow over a 7.6 by 7.6 cm obstacle in a boundary-layer wind tunnel. Smoke visualization revealed a low-frequency oscillation of the bubble downstream of the obstacle. Hot-wire anemometer data are presented for the mean velocity and turbulent kinetic energy at the mid-plane of the obstacle and the mid-plane of the downstream recirculation bubble. A single hot-wire probe was found to be suitable for determining mean streamwise velocities with an accuracy of 11 %. The downstream recirculation bubble was unsteady and had a length range from 3 to 8 obstacle lengths.The experimental results for flow over the obstacle were compared with numerical calculations to validate the numerical solution procedure. A sensitivity study on the effect of curvature correction and variation of turbulence model constants on the numerical solution was conducted. Calculations that included the curvature correction model gave a downstream recirculation bubble length of 5.9 obstacle lengths while excluding the correction reduced this length to 4.4.In the second part of the study, numerical calculations were performed for the dispersion of a heavier-than-air gas in the vicinity of the two-dimensional obstacle. Characteristics of an adiabatic boundary layer were used in these calculations. The densities of the contaminant gases were 0, 25 and 50% greater than the air density. Calculations were performed with the contaminant injection source upstream and downstream of the obstacle.Use of the pressure gradient model reduced the size of the dense gas cloud by as much as 12%. The curvature correction model also affected the cloud expanse by reducing the effective turbulent viscosity in the downstream recirculation bubble. The location of the injection source had the largest impact on the cloud size. The area of the cloud within the 5 % contour was three times larger for downstream injection than for upstream injection.