Multi-angle backscatter classification and sub-bottom profiling for improved seafloor characterization

This study applies three classification methods exploiting the angular dependence of acoustic seafloor backscatter along with high resolution sub-bottom profiling for seafloor sediment characterization in the Eckernförde Bay, Baltic Sea Germany. This area is well suited for acoustic backscatter studies due to its shallowness, its smooth bathymetry and the presence of a wide range of sediment types. Backscatter data were acquired using a Seabeam1180 (180 kHz) multibeam echosounder and sub-bottom profiler data were recorded using a SES-2000 parametric sonar transmitting 6 and 12 kHz. The high density of seafloor soundings allowed extracting backscatter layers for five beam angles over a large part of the surveyed area. A Bayesian probability method was employed for sediment classification based on the backscatter variability at a single incidence angle, whereas Maximum Likelihood Classification (MLC) and Principal Components Analysis (PCA) were applied to the multi-angle layers. The Bayesian approach was used for identifying the optimum number of acoustic classes because cluster validation is carried out prior to class assignment and class outputs are ordinal categorical values. The method is based on the principle that backscatter values from a single incidence angle express a normal distribution for a particular sediment type. The resulting Bayesian classes were well correlated to median grain sizes and the percentage of coarse material. The MLC method uses angular response information from five layers of training areas extracted from the Bayesian classification map. The subsequent PCA analysis is based on the transformation of these five layers into two principal components that comprise most of the data variability. These principal components were clustered in five classes after running an external cluster validation test. In general both methods MLC and PCA, separated the various sediment types effectively, showing good agreement (kappa >0.7) with the Bayesian approach which also correlates well with ground truth data (r²?>?0.7). In addition, sub-bottom data were used in conjunction with the Bayesian classification results to characterize acoustic classes with respect to their geological and stratigraphic interpretation. The joined interpretation of seafloor and sub-seafloor data sets proved to be an efficient approach for a better understanding of seafloor backscatter patchiness and to discriminate acoustically similar classes in different geological/bathymetric settings.     

Seafloor acoustic remote sensing with multibeam echo-sounders and bathymetric sidescan sonar systems

This paper examines the potential for remote classification of seafloor terrains using a combination of quantitative acoustic backscatter measurements and high resolution bathymetry derived from two classes of sonar systems currently used by the marine research community: multibeam echo-sounders and bathymetric sidescans sonar systems. The high-resolution bathymetry is important, not only to determine the topography of the area surveyed, but to provide accurate bottom slope corrections needed to convert the arrival angles of the seafloor echoes received by the sonars into true angles of incidence. An angular dependence of seafloor acoustic backscatter can then be derived for each region surveyed, making it possible to construct maps of acoustic backscattering strength in geographic coordinates over the areas of interest. Such maps, when combined with the high-resolution bathymetric maps normally compiled from the data output by the above sonar systems, could be very effective tools to quantify bottom types on a regional basis, and to develop automatic seafloor classification routines.     

Waterfall notch-filtering for restoration of acoustic backscatter records from Admiralty Bay,Antarctica

A series of multibeam sonar surveys were conducted from 2009 to 2013 around Admiralty Bay, Shetland Islands, Antarctica. These surveys provided a detailed bathymetric model that helped understand and characterize the bottom geology of this remote area. Unfortunately, the acoustic backscatter records registered during these bathymetric surveys were heavily contaminated with noise and motion artifacts. These artifacts persisted in the backscatter records despite the fact that the proper acquisition geometry and the necessary offsets and delays were applied during the survey and in post-processing. These noisy backscatter records were very difficult to interpret and to correlate with gravity-core samples acquired in the same area. In order to address this issue, a directional notch-filter was applied to the backscatter waterfall in the along-track direction. The proposed filter provided better estimates for the backscatter strength of each sample by considerably reducing residual motion artifacts. The restoration of individual samples was possible since the waterfall frame of reference preserves the acquisition geometry. Then, a remote seafloor characterization procedure based on an acoustic model inversion was applied to the restored backscatter samples, generating remote estimates of acoustic impedance. These remote estimates were compared to Multi Sensor Core Logger measurements of acoustic impedance obtained from gravity core samples. The remote estimates and the Core Logger measurements of acoustic impedance were comparable when the shallow seafloor was homogeneous. The proposed waterfall notch-filtering approach can be applied to any sonar record, provided that we know the system ping-rate and sampling frequency.     

Toward remote seafloor classification using the angular response ofacoustic backscattering: a case study from multiple overlapping GLORIAdata

While the average seafloor backscatter strength within a narrow range of grazing angles can be used as a first-order classification tool, this technique often fails to distinguish seafloors of known differing geological character. In order to resolve such ambiguities, it is necessary to examine the variation in backscatter strength as a function of grazing angle. For this purpose, a series of multiply overlapping GLORIA sidescan sonar images (6.5 kHz) have been obtained in water depths ranging from 1000 to 2500 m. To constrain the placement of acoustic backscatter measurements and to measure the true impinging angle of the incident wave, the corresponding seafloor was simultaneously surveyed using the Seabeam multibeam system. As a result of the multiple overlap, the angular response of seafloor backscatter strength may be derived for regions much smaller than the swath width. By using the derived angular response of seafloor backscatter strength in regions for which sediment samples exist, an empirical seafloor classification scheme is proposed based on the shape, variance, and magnitude of the angular response. Because of the observed variability in the shape of the angular response with differing seafloor types, routine normalization of single-pass swath data to an equivalent single grazing angle image cannot be achieved. As a result, for the case of single-pass surveys, confident seafloor classification may only be possible for regions approaching the scale of the swath width     

多波束反向散射强度数据处理研究

在探讨多波束测深系统反向散射强度与海底底质类型的关系基础上,研究影响反向散射强度的各种因素,主要分析了海底地形起伏、中央波束区反射信号对反向散射强度的影响,并给出了消除这些影响的方法;将处理后的“纯”反向散射强度数据镶嵌生成海底声像图,为海底底质类型划分以及地貌解译提供了基础数据和辅助判读依据.     

Inhomogeneous substrate analysis using EM300 backscatter imagery

Backscatter reflectivity from multibeam echo-sounders provides a powerful tool to efficiently characterize seafloor substrates. A comprehensive EM300 bathymetric and backscatter survey has been completed of Cook Strait, in central New Zealand. This paper presents a detailed analysis of the realtime corrections applied to the raw EM300 multibeam data and additional corrections required to compute angular variations of the backscatter strength. The corrections, including the local absorption coefficient, the influence of seafloor topography and sound refraction in the water column, are determined for different Cook Strait seafloor substrates. Modifying MB-System software code, we extracted the backscatter signal parameters in order to quantify the raw backscatter strength and apply additional processing. Profiles of backscatter strength versus incidence angle were computed for a variety of sites characterized by flat seafloor and homogeneous substrates, and for which ground-truth data were available. For each homogeneous site, different but characteristic backscatter profiles are observed that can be interpreted in terms of sediment facies. To analyze heterogeneous substrates, we present a statistical technique, based on a 3-dimensional distribution of (incidence angle, backscatter strength) couples that preserves geological information of the substrate components. This analysis, using backscatter data acquired on a submarine volcano, north of New Zealand, clearly differentiates soft sediments and lava flows within a heterogeneous substrate.     

Processing Multibeam Backscatter Data

A new highly precise source of data has recently become available using multibeam sonar systems in hydrography. Multibeam sonar systems can provide hydrographic quality depth data as well as high-resolution seafloor sonar images. We utilize the seafloor backscatter strength data of each beam from multibeam sonar and the automatic classification technology so that we can get the seafloor type identification maps. In this article, analyzing all kinds of error effects in backscatter strength, data are based on the relationship between backscatter strength and seafloor types. We emphasize particularly analyzing the influences of local bottom slope and near nadir reflection in backscatter strength data. We also give the correction algorithms and results of these two influent factors. After processing the raw backscatter strength data and correcting error effects, we can get processed backscatter strength data which reflect the features of seafloor types only. Applying the processed backscatter strength data and mosaicked seafloor sonar images, we engage in seafloor classification and geomorphy interpretation in future research.     

Processing of high-frequency multibeam echo sounder data for seafloor characterization

Processing simultaneous bathymetry and backscatter data, multibeam echosounders (MBESs) show promising abilities for remote seafloor characterization. High-frequency MBESs provide a good horizontal resolution, making it possible to distinguish fine details at the water-seafloor interface. However, in order to accurately measure the seafloor influence on the backscattered energy, the recorded sonar data must first be processed and cleared of various artifacts generated by the sonar system itself. Such a preprocessing correction procedure along with the assessment of its validity limits is presented and applied to a 95-kHz MBES (Simrad EM 1000) data set. Beam pattern effects, uneven array sensitivities, and inaccurate normalization of the ensonified area are removed to make possible further quantitative analysis of the corrected backscatter images. Unlike low-frequency data where the average backscattered energy proves to be the only relevant feature for discriminating the nature of the seafloor, high-frequency MBES backscatter images exhibit visible texture patterns. This additional information involves different statistical distributions of the backscattered amplitudes obtained from various seafloor types. Non-Rayleigh statistics such as K-distributions are shown to fit correctly the skewed distributions of experimental high-frequency data. Apart from the effect of the seafloor micro-roughness, a statistical model makes clear a correlation between the amplitude statistical distributions and the signal incidence angle made available by MBES bathymetric abilities. Moreover, the model enhances the effect of the first derivative of the seafloor backscattering strength upon statistical distributions near the nadir and at high incidence angles. The whole correction and analysis process is finally applied to a Simrad EM 1000 data set.     

Processing Multibeam Backscatter Data

A new highly precise source of data has recently become available using multibeam sonar systems in hydrography. Multibeam sonar systems can provide hydrographic quality depth data as well as high-resolution seafloor sonar images. We utilize the seafloor backscatter strength data of each beam from multibeam sonar and the automatic classification technology so that we can get the seafloor type identification maps. In this article, analyzing all kinds of error effects in backscatter strength, data are based on the relationship between backscatter strength and seafloor types. We emphasize particularly analyzing the influences of local bottom slope and near nadir reflection in backscatter strength data. We also give the correction algorithms and results of these two influent factors. After processing the raw backscatter strength data and correcting error effects, we can get processed backscatter strength data which reflect the features of seafloor types only. Applying the processed backscatter strength data and mosaicked seafloor sonar images, we engage in seafloor classification and geomorphy interpretation in future research.     

Multibeam sonar backscatter data processing

Multibeam sonar systems now routinely record seafloor backscatter data, which are processed into backscatter mosaics and angular responses, both of which can assist in identifying seafloor types and morphology. Those data products are obtained from the multibeam sonar raw data files through a sequence of data processing stages that follows a basic plan, but the implementation of which varies greatly between sonar systems and software. In this article, we provide a comprehensive review of this backscatter data processing chain, with a focus on the variability in the possible implementation of each processing stage. Our objective for undertaking this task is twofold: (1) to provide an overview of backscatter data processing for the consideration of the general user and (2) to provide suggestions to multibeam sonar manufacturers, software providers and the operators of these systems and software for eventually reducing the lack of control, uncertainty and variability associated with current data processing implementations and the resulting backscatter data products. One such suggestion is the adoption of a nomenclature for increasingly refined levels of processing, akin to the nomenclature adopted for satellite remote-sensing data deliverables.     

Geometric corrections on sidescan sonar images based on bathymetry. Application with SeaMARC II and Sea Beam data

Acoustic backscatter images of the seafloor obtained with sidescan sonar systems are displayed most often using a flat bottom assumption. Whenever this assumption is not valid, pixels are mapped incorrectly in the image frame, yielding distorted representations of the seafloor. Here, such distortions are corrected by using an appropriate representation of the relief, as measured by the sonar that collected the acoustic backscatter information. In addition, all spatial filtering operations required in the pixel relocation process take the sonar geometry into account. Examples of the process are provided by data collected in the Northeastern Pacific over Fieberling Guyot with the SeaMARC II bathymetric sidescan sonar system and the Sea Beam multibeam echo-sounder. The nearly complete (90%) Sea Beam bathymetry coverage of the Guyot serves as a reference to quantify the distortions found in the backscatter images and to evaluate the accuracy of the corrections performed with SeaMARC II bathymetry. As a byproduct, the processed SeaMARC II bathymetry and the Sea Beam bathymetry adapted to the SeaMARC II sonar geometry exhibit a 35m mean-square difference over the entire area surveyed.On leave at the Naval Research Laboratory, Code 7420, Washington D.C. 20375-5350.     

Analysis of seafloor backscatter strength dependence on the survey azimuth using multibeam echosounder data

The sediment backscatter strength measured by multibeam echosounders is a key feature for seafloor mapping either qualitative (image mosaics) or quantitative (extraction of classifying features). An important phenomenon, often underestimated, is the dependence of the backscatter level on the azimuth angle imposed by the survey line directions: strong level differences at varying azimuth can be observed in case of organized roughness of the seabed, usually caused by tide currents over sandy sediments. This paper presents a number of experimental results obtained from shallow-water cruises using a 300-kHz multibeam echosounder and specially dedicated to the study of this azimuthal effect, with a specific configuration of the survey strategy involving a systematic coverage of reference areas following “compass rose” patterns. The results show for some areas a very strong dependence of the backscatter level, up to about 10-dB differences at intermediate oblique angles, although the presence of these ripples cannot be observed directly—neither from the bathymetry data nor from the sonar image, due to the insufficient resolution capability of the sonar. An elementary modeling of backscattering from rippled interfaces explains and comforts these observations. The consequences of this backscatter dependence upon survey azimuth on the current strategies of backscatter data acquisition and exploitation are discussed.     

基于回波时间的多波束测深与声纳数据匹配方法

以多波束精确的水深数据为参照源,采用原始回波时间对多波束测深数据与其同源声纳数据进行匹配,从而获得高精度和高分辨率的海底影像数据,并避免了传统声纳图像处理过程中斜距改正所带来的几何形变。匹配结果采用光照图输出,并与三维水深图、原始声纳图像和CARIS处理后的声纳图像进行比较分析。该方法有效地提高了多波束数据的利用率,增强了对海底地形的探测分辨率。     

Analysis of simrad EM12 multibeam bathymetry and acoustic backscatter data for seafloor mapping,exemplified at the Mid-Atlantic Ridge at 45° N

The EM12 multibeam echosounder can record acoustic backscatter information as well as high resolution bathymetry. The dataset presented, from the axis of the Mid-Atlantic Ridge at 45° N, was the first EM12 survey of a mid-ocean ridge. This paper presents methods for utilising the backscatter information. Data processing enables the production of a mosaic of acoustic backscatter, and visualisation techniques are investigated to provide initial qualitative views of the combined backscatter and bathymetry datasets. The co-registration of the backscatter and bathymetry data enables quantitative analysis of their relationships. Various sites of different geological type have been selected and their angular acoustic backscattering relationships estimated, including the effect on backscatter of incidence angle, its regional variability with bottom type and the influence of bottom slope. Incidence angles and bottom type are shown to affect backscatter to a similar degree, while slopes appear to contribute little. The geometry of hull-mounted systems, such as the EM12, is significantly different from that of conventional sidescan sonars, such as GLORIA, and the backscatter images from the two types differ in various respects. Because of the wide variations in incidence angle that are common with hull-mounted systems, and the importance of incidence angle in determining backscatter strength, it is vital to consider the effect of incidence angle during interpretation.     

Seafloor Geomorphology and Processes on the Western Continental Margin of India based on Multibeam Acoustic Backscatter Data Analysis

An assessment of the multibeam sonar data of the central Western Continental Margins of India has been carried out to evaluate the seafloor geomorphology and processes by examining the geomorphological attributes e.g., slope, sediments, structures, etc. associated with geomorphic features. The variation in relief and the features located in the region have been mapped and interpreted collectively by utilizing several geospatial mapping tools. The backscatter strength across the area, apparently congruent with the local relief, has helped to examine the sediment movement on the seafloor. The prominent features found in the region include faults, pockmarks, mounds, submarine terraces, and submerged fossil reefs. Several areas with varying topography engender comparable fractal dimension at short scale breaks, and the probability density functions (PDFs) utilizing backscatter data depicting overlapping classes. The present study highlights how fractals and scale break parameters can be utilized to determine the seafloor processes and associated sedimentological dynamics in a complex geographical environment with strong bottom currents, seasonal upwelling, and faulted structure. The role and impact of the various geomorphic processes on the reworking of sediment movement and the overall progression of the seafloor morphology has been revealed for the first time in this part of the ocean bottom.     

Sea-floor classification using multibeam echo-sounding angular backscatter data: a real-time approach employing hybrid neural network architecture

The presently studied numerical model, e.g., composite roughness, is successful for the purpose of seafloor classification employing processed multibeam angular backscatter data from manganese-nodule-bearing locations of the Central Indian Ocean Basin. Hybrid artificial neural network (ANN) architecture, comprised of the self-organizing feature map and learning vector quantization (LVQ), has been implemented as an alternative technique for sea-floor roughness classification, giving comparative results with the aforesaid numerical model for processed multibeam angular backscatter data. However, the composite-roughness model approach is protracted due to the inherent need for processed data including system-gain corrections. In order to establish that tedious processing of raw backscatter values is unessential for efficient classification, hybrid ANN architecture has been attempted here due to its nonparametric approach. In this technical communication, successful employment of LVQ algorithm for unprocessed (raw) multibeam backscatter data indicates true real-time classification application.     

Accuracy of the spatial representation of the seafloor with bathymetric sidescan sonars

When isobath maps of the seafloor are constructed with a bathymetric sidescan sonar system the position of each sounding is derived from estimates of range and elevation. The location of each pixel forming the acoustic backscatter image is calculated from the same estimates. The accuracy of the resulting maps depends on the acoustic array geometry, on the performances of the acoustic signal processing, and on knowledge of other parameters including: the platform's navigation, the sonar transducer's attitude, and the sound rays' trajectory between the sonar and the seafloor. The relative importance of these factors in the estimation of target location is assesed. The effects of the platform motions (e.g. roll, pitch, yaw, sway, surge and heave) and of the uncertainties in the elevation angle measurements are analyzed in detail. The variances associated with the representation (orientation and depth) of a plane, rectangular patch of the seafloor are evaluated, depending on the geometry of the patch. The inverse problem is addressed. Its solution gives the lateral dimensions of the spatial filter that must be applied to the bathymetric data to obtain specified accuracies of the slopes and depths. The uncertainty in the estimate of elevation angle, mostly due to the acoustic noise, is found to bring the main error contribution in across-track slope estimates. It can also be critical for along-track slope estimates, overshadowing error contributions due to the platform's attitude. Numerical examples are presented.On leave at the Naval Research Laboratory, Code 7420, Washington D.C. 20375-5350, U.S.A.     

Backscatter calibration of high-frequency multibeam echosounder using a reference single-beam system,on natural seafloor

The calibration of multibeam echosounders for backscatter measurements can be conducted efficiently and accurately using data from surveys over a reference natural area, implying appropriate measurements of the local absolute values of backscatter. Such a shallow area (20-m mean depth) has been defined and qualified in the Bay of Brest (France), and chosen as a reference area for multibeam systems operating at 200 and 300 kHz. The absolute reflectivity over the area was measured using a calibrated single-beam fishery echosounder (Simrad EK60) tilted at incidence angles varying between 0° and 60° with a step of 3°. This reference backscatter level is then compared to the average backscatter values obtained by a multibeam echosounder (here a Kongsberg EM 2040-D) at a close frequency and measured as a function of angle; the difference gives the angular bias applicable to the multibeam system for recorded level calibration. The method is validated by checking the single- and multibeam data obtained on other areas with sediment types different from the reference area.     

声学方法进行海底沉积物遥测分类:综述

本文讨论利用声学遥测方法进行海底沉积物分类的目的、用途及该项技术的发展背景和现状。重点介绍目前主要的用于浅、表层沉积物分类的声学遥测方法，包括选通等幅脉冲、宽频带脉冲、连续线性扫频脉冲等正入射方法和侧扫声呐、多波束测深等斜入射方法。回顾它们的发展历史，评述它们的技术现状，并讨论它们的进一步发展