黄海、东海上空春季气溶胶光学特性观测分析

2003年春季国家卫星海洋应用中心等几家单位在黄海和东海海区进行了为期40 d的二类水体信息测量试验,试验中使用手持太阳辐射计对海区上空大气光学特性进行了观测,并获得了大量晴空天气条件下的大气光学数据.利用本次试验获取的测量数据得到了黄海、东海海区春季的大气气溶胶光学特性,其中包括气溶胶光学厚度和气溶胶粒子谱分布.采用Langley方法对测量得到的太阳直射辐射量进行处理得到了海区上空气溶胶光学厚度,利用得到的气溶胶光学厚度来反演气溶胶粒子谱分布.反演结果表明无云情况下黄海、东海上空的气溶胶光学厚度在0.2~0.4左右,且气溶胶粒子谱分布的变化趋势也很接近;海区上空霾层较厚时测量得到的气溶胶光学厚度明显增大,最大接近0.8;气溶胶粒子谱分布的变化趋势发生了明显的变化.     

基于GOCI数据黄海气溶胶光学厚度反演方法研究

气溶胶是研究大气辐射收支的重要参数,确定气溶胶光学特性对于研究气候变化和实现卫星定量遥感有重要意义。针对黄海上空气溶胶反演时存在下垫面背景受到内陆河流巨大影响及吸收性气溶胶干扰的问题,本文提出了一种基于GOCI数据的气溶胶光学厚度反演新算法,利用AERONET数据对比分析了黄海上空气溶胶光学厚度的反演精度,结果表明该算法能较好地反演气溶胶光学厚度,相比业务化算法具有较高的反演精度。     

气溶胶光学厚度的时空变化

在大气中气溶胶微粒是一种重要的大气微量成分。气溶胶光学厚度也是大气校正所需的重要大气参数，同时也是海洋水色卫星主要的数据产品。由于气溶胶光学厚度的时空变化较大，所以如何准确获取大气校正和卫星数据产品真实性检验所需的气溶胶光学厚度则是至关重要的。在简述气溶胶光学性质的基础上，并结合2002年6月HY—1南海实验数据来阐述现场气溶胶光学厚度的准确获取。     

海面盐度卫星遥感的大气影响仿真

海面盐度是描述海洋的重要参量之一,基于星载微波辐射计的海面盐度探测也是海洋遥感研究的重要内容.在影响盐度遥感的误差中,大气是重要的影响因素.在辐射传输理论的基础上,仿真计算了大气透射率和上、下行辐射随地面大气温度、压强和辐射计入射角的变化关系,进而得到大气对接收辐射亮温的影响.仿真结果表明,大气对盐度遥感的影响很大,但当地面大气温度和压强精度分别达到2℃和1000 Pa时,可以消除大气的影响.     

基于MODIS数据气溶胶光学厚度特征分析

气溶胶光学厚度(AOD)是表征大气浑浊程度的关键的物理量,也是确定气溶胶气候效应的重要因素。本文以环渤海区域为例,首先利用太阳光度计观测数据对MODIS数据气溶胶光学厚度产品进行验证分析,暗像元法反演结果最好;然后基于2005年1月至2019年2月MODIS暗像元法反演结果分析环渤海地区气溶胶光学厚度的时空分布。结果表明:环渤海地区AOD分布呈现出明显的季节变化,春夏季节气溶胶处于高值区(0.7-0.9),秋冬季节处于低值区(0.2-0.5),AOD高值区主要分布于北京、天津及河北和山东交界地区。气溶胶分布特征可能与沙尘天气、季风变化和工业生产生活的污染物排放有关。     

中国东部海域卫星遥感PFSST和现场观测资料的差异

海表面温度(SST)是海洋-大气系统中的一个重要物理量,是影响天气和气候的一个重要因子,也是气候的指示因子之一,在海洋学研究中也占有非常重要的地位.     

基于SBDART辐射传输模式的晴天地面总辐射模拟误差分析

基于SBDART辐射传输模式,利用POM-02型天空辐射计观测和反演获得的气溶胶光学参数计算地面总辐射,并与CM21辐射表的观测结果对比以探讨晴天地面总辐射模拟的误差来源。结果表明:地面总辐射对气溶胶单次散射比和水汽柱含量的敏感性较强,模拟中对这2个因子减少50%会分别造成地面总辐射量增加56.99W/m2和减少25.45W/m2。在准确输入水汽柱含量基础上变换大气廓线对地面总辐射计算结果影响甚微。相关性及多元线性回归分析表明,天顶角、气溶胶单次散射比和光学厚度是地面总辐射相对误差的主要来源。利用上述3个因子建立回归方程,回归结果与地面总辐射相对误差的相关系数为0.486(通过了置信度0.01的显著性检验),说明回归方程能够准确的计算相对误差,利用该方法可以对本站模式计算结果进行修订。     

气溶胶的光学厚度与反射率比的处理方法

气溶胶光学厚度与气溶胶反射率比都是大气校正所需的重要大气参数，同时也是海洋水色卫星主要的数据产品，它们的测量精度将直接到卫星数据产品正演的精度和卫星数据产品的应用。文章在简述气溶胶光学厚度与气溶胶反射率比的基本测量原理和处理方法的基础上，结合多次试验数据结果进行简要的评价。     

利用Sea WiFS资料反演我国海域气溶胶粒子密度分布

在卫星数据反演气溶胶光学厚度产品的基础上,讨论了二次反演大气柱中气溶胶粒子密度的问题.通过理论分析,利用多波段气溶胶光学厚度提取大气柱中气溶胶粒子密度是可行的,并指出能否准确确定多波段气溶胶光学厚度会直接影响粒子密度的反演结果.定义并分析了气溶胶粒子消光体积权重系数随粒子半径的变化,表明从气溶胶光学厚度中反演大气柱中气溶胶积聚模态和粗模态粒子密度的结果是可信的.利用SeaWiFS气溶胶光学厚度产品,运用蒙特卡罗法反演了2002年我国海域上空大气柱中积聚模态和粗模态气溶胶粒子密度,结果表明,积聚模态粒子密度比粗模态的高2~3个量级,它们的空间分布趋势一致;我国近岸海域大气柱中气溶胶粒子密度高于离岸海域的;春季气溶胶粒子密度高于其他季节的,特别在黄海、东海海区是如此.     

山东气溶胶光学厚度时空分布及其与地面大气污染物质量浓度的相关性分析

基于卫星的气溶胶光学厚度(aerosol optical thickness,AOT)是研究大气污染程度及时空变化的重要参考,由于大气污染物排放特征、地理和气候背景不同,不同区域AOT的时空分布及其与地面大气污染物质量浓度的相关性存在一定的差异.选取了2017年7月-2020年7月山东89个国家环境空气质量监测站数据、...     

Microbial Biomass and Organic Nutrients in the Deep-Sea Sediments of the Central Indian Ocean Basin

In order to assess the impact of deep-sea mining on the in situ benthic life, we measured the microbial standing stock and concentration of organic nutrients in the deep-sea sediments of the Central Indian Ocean Basin in the Indian pioneer area. Sediments were collected using box core and grab samples during September 1996. The total bacterial numbers ranged from 10 10 -10 11 cells per g -1 dry weight sediment. There was a marginal decrease in the number of bacteria from surface to 30 cm depth, though the subsurface section registered a higher number than did the surface. The highest numbers were encountered at depths of 4-8 cm. The retrievable number of bacteria were two orders less in comparison with the direct total counts of bacteria. An almost homogeneous distribution of bacteria, total organic carbon, living biomass, and lipids throughout the depth of cores indicates active microbial and benthic processes in the deep sea sediments. On the other hand, a uniform distribution of total counts of bacteria, carbohydrates, and total organic carbon in all the cores indicates their stable nature and suggests that they can serve as useful parameters for long-term monitoring of the area after the benthic disturbance. Further studies on temporal variability in this region would not only verify the observed norms of distribution of these variables but would also help to understand restabilization processes after the simulated benthic disturbance.     

Assessing the Validity of Seismo-Acoustic Predictor Equations for Obtaining Seabed and Sub-Surface Sediment Physical Properties

The interdependence between the seismo-acoustic properties of a marine sediment and its geotechnical/physical parameters has been known for many years, and it has been postulated that this should allow the extraction of geotechnical information from seismic data. Though in the literature many correlations have been published for the surficial layer, there is a lack of information for greater sediment depths. In this article, a desktop study on a synthetic seafloor model illustrates how the application of published near-surface prediction equations to subsurface sediments (up to several tens of meters burial depth) can lead to spurious predictions. To test this further, acoustic and geotechnical properties were measured on a number of sediment core samples, some of which were subjected to loading in acoustically-equipped consolidation cells (oedometers) to simulate greater burial depth conditions. For low effective pressures (representing small burial depths extending to around 10 meters subsurface), the general applicability of established relationships was confirmed: the prediction of porosity, bulk density, and mean grain size from acoustic velocity and impedance appears generally possible for the investigated sedimentary environments. As effective pressure increases through, the observed relationships deviate more and more from the established ones for the near-surface area. For the samples tested in this study, in some instances increasing pressure even resulted in decreasing velocities. There are several possible explanations for this abnormal behavior, including the presence of gas, overconsolidation, or bimodal grain size distribution. The results indicate that an appropriate depth correction must be introduced into the published prediction equations in order to obtain reliable estimates of physical sediment properties for greater subsurface depths.     

Geoacoustic Inversion via Genetic Algorithm and Its Application to Manganese Sediment Identification

An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm.     

海上大直径钢管桩打桩过程中桩周土强度弱化研究

海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明：土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。     

Interannual Sea Level Variations and Annual Tides in the Northwestern Pacific

Specific properties of the interannual sea level variations and annual tides in the Northwestern Pacific were studied. Several tide stations were monitored. The monthly mean sea level for the year of 1995 was analyzed at each tide station. A seismic event in 1995, some tectonic activity around the subject area, and the Kuroshio (the oceanic western boundary current) may possibly contaminate results which would have occurred from the astronomical annual tide alone.     

Flow Cytometric Analysis of Coastal Lagoon Bacterioplankton and Picophytoplankton: Fixation and Storage Effects

The effect of different fixation and storage protocols on the flow cytometric (FCM) simultaneous analysis of bacterioplankton and phytoplankton in coastal seawater samples (Mediterranean coastal lagoons) was investigated. FCM measurements (cell number, fluorescence and scatter characteristics) were obtained through DAPI staining. Three fixatives [glutaraldehyde (GA), formaldehyde (FA) and paraformaldehyde (PFA)] and two storage (3 months duration) methods (5 °C and −196 °C) were tested. Two dominant populations were detected in studied samples: bacteria and eukaryotic picophytoplankton. Adding fixatives (2% final concentration) appears necessary to obtain FCM exhaustive counts of all the bacteria and phytoplanktonic cells. This was related to the permeation effect of fixatives which allowed a better DAPI staining of the cells. Maximum fluorescence, i.e. optimal staining of the cells was obtained with FA or PFA, and significant lower fluorescences with GA. Fixed samples stored at 5 °C induced rapid cell loss. Only storage in liquid nitrogen of samples fixed with FA or PFA, allows mid-term (≥4 months) preservation of bacteria or picophytoplankton cell numbers, and limited evolution of DAPI-induced fluorescence and scatter characteristics.     

INFORMATION FOR AUTHORS

<正>Acta Oceanologica Sinica(AOS)is a comprehensive academic journal edited by the Editorial Committee of Acta Oceanologica Sinica and is designed to provide a forum for important research papers of the marine scientific community which reflect the information on a worldwide basis.The journal publishes scholarly papers on marine science and technology,including physics,chemistry,biology,     

Deep-Sea Sediment Compression Curves: Some Controlling Factors, Spurious Overconsolidation, Predictions, and Geophysical Reproduction

Oedometer tests have been carried out on 70 undisturbed surficial clays (at approximately 250 mm below the mudline), mostly collected by free-fall corers from sites widely scattered throughout the deep-sea North Atlantic. Acoustic measurements were also made, initially on contiguous samples and ultimately on the same sample using a geophysically instrumented oedometer which also collected electrical resistivity data. Apart from those quiescent areas below the carbonate compensation depth, such as north of the West Indies where very fine clays exist, most of the samples are silty clays whose geotechnical-geophysical properties are dependent on the type of clay minerals present (and their ability to take in moisture), the sand-size fraction, and the quantity of carbonate present. Thus the pure clays have high compressibilities which decrease on the addition of coarse particles, while the converse is true for the acoustic parameters, these increasing with the sand fraction. Using the notion of the intrinsic compression line for all samples, and comparison to it of the measured compression curves, it is clear that, contrary to some previously held ideas, most deep-sea clays are normally consolidated; the addition of carbonate has the effect of creating an open, stronger sediment skeleton. Interestingly, where information is available, the variation with depth of a sample's acoustic velocity follows the void ratio pressure relationship of the compression curve. This allows the construction of an in-situ sediment compression curve using the in-situ geophysical observations.