河南省济源盆地下侏罗统鞍腰组重力流沉积特征及其构造意义

在详细野外剖面工作的基础上,通过岩性特征、沉积构造及沉积序列等的系统观察研究,发现济源盆地下侏罗统鞍腰组重力流沉积由滑塌沉积、砂质碎屑流沉积和浊流沉积构成。滑塌沉积以砂岩和泥岩的混杂、岩层的滑动变形以及泥岩呈碎块被卷入砂岩层中为特征;砂质碎屑流沉积常呈厚层块状,颗粒分选和磨圆较差,杂基较多,可见漂浮于层内的石灰岩砾石;常见的浊流沉积分为2种类型:具有明显正粒序结构的浊流沉积和砂泥岩薄互层的浊流沉积,可用鲍马序列来描述。鞍腰组重力流沉积可划分为3个沉积序列:序列A记录了滑塌沉积→砂质碎屑流沉积→浊流沉积→深湖沉积的转换过程;序列B表现为砂质碎屑流与浊流沉积的叠覆;序列C由浊流及湖泊沉积构成,并经历了由序列A→序列B→序列C的沉积演化过程。重力流的形成受秦岭造山带于早侏罗世沿三门峡—鲁山—舞阳断裂发生逆冲推覆作用的控制,其沉积演化指示了秦岭造山带造山作用由强到弱的过程。     

河南东濮凹陷古近系沙三中亚段重力流沉积与伴生遗迹化石组合

基于对东濮凹陷97口钻井岩心的详细观察和分析,在古近系沙河街组沙三中亚段湖相沉积中识别出滑动、滑塌、碎屑流和浊流共4种类型的重力流沉积。各种类型沉积的主要判识特征如下: (1)滑动沉积以保留部分原始沉积构造、层内准同生小型断裂构造及较大角度的地层倾角(陡倾构造)发育、伴生Skolithos-Palaeophycus遗迹组合或Planolites-Taenidium遗迹组合为主要特征; (2)滑塌沉积以砂岩层顶、底面均与暗色泥岩呈突变接触以及岩层内部发育各种同生软沉积物变形构造(如包卷层理、火焰状构造、泄水构造、液化脉和各种撕裂屑等)为主要鉴别特征;(3)碎屑流沉积以砂岩呈块状构造、顶部发育漂浮砾石、底部泥岩撕裂屑发育并可见“泥包砾”现象、砂岩顶、底面均与暗色泥岩突变接触为特征;滑塌沉积和碎屑流沉积序列的上部常常伴生Mermoides-Parapaleodictyon遗迹组合; (4)浊流沉积以发育完整或不完整的鲍马序列为主要特征,浊积砂体下部见正粒序层理,底面见有冲刷痕、不规则槽模、重荷模等沉积构造,中上部发育深湖沉积中常见的Semirotundichnus-Puyangichnus遗迹组合。综合分析上述各种重力流沉积特征和伴生遗迹化石组合所体现的水深变化规律,认为遗迹化石组合随着湖水深度的增加呈分带性,与重力流沉积随水深增加而出现的滑动—滑塌—碎屑流—浊流沉积序列具有明显的一致性,且伴随重力流沉积而产生的生物扰动作用是增强的。因此,生物扰动构造(遗迹化石)的研究不仅对湖相沉积中储集层物性的分析具有重要意义,而且针对重力流沉积类型的判识还能提供重要的生物遗迹学信息。     

鄂尔多斯盆地西南部延长组6段重力流沉积特征及其油气地质意义

鄂尔多斯盆地南部延长组长6油层组中发现大量块状无层理砂岩,属陡坡带处堆积的三角洲前缘沉积物沿斜坡滑塌形成的重力流沉积。综合岩芯、露头、测井及分析化验资料,认为延长组发育滑塌岩、液化沉积物流、砂质碎屑流和经典浊流等多种类型的重力流,不同类型重力流沉积特征差异明显;其中地形坡度、物源供给和一定的触发机制是形成长6重力流沉积的基本条件;在流动过程中由于水的混入和沉积物卸载,重力流沉积物发生浓度变化和流态转换,形成滑塌岩-砂质碎屑流、砂质碎屑流-浊流、浊流等不同组合类型;重力流砂岩延伸至半深湖-深湖相泥岩中,与长7烃源岩侧向连通,形成有利的成藏组合,是研究区延长组重要的勘探目标区。     

鄂尔多斯盆地陇东地区长7段沟道型重力流沉积特征研究

致密砂岩目前已成为中国油气勘探开发的重点领域。本文通过野外剖面及岩心观察、测井资料和深水重力流沉积理论对就鄂尔多斯盆地陇东地区长7段重力流沉积特征进行了系统研究,结果表明该区发育砂质碎屑流沉积、浊流沉积及滑塌沉积3种成因类型的重力流沉积砂体。砂质碎屑流沉积由灰色、褐灰色细砂岩构成,厚度均在0.5m以上,多数大于1m,块状层理发育,具有近源分布特征;浊流沉积由灰色、深灰色粉砂岩、泥质粉砂岩构成,单层厚数度从几厘米到十几厘米,具有完整或不完整的鲍马序列,呈远源分布特征;滑塌沉积在研究区发育较少。研究区长7段重力流沉积砂体横向连通性较差,纵向连通性较好,具有带状展布的特征,为沟道型(非扇型)重力流沉积体系。     

滑塌型深水重力流沉积特征及沉积模式:以渤海湾盆地临南洼陷古近系沙三中亚段为例*

综合运用钻井岩心、测录井等资料,通过岩心观察、薄片鉴定和粒度分析等方法,对渤海湾盆地临南洼陷古近系沙三中亚段深水重力流沉积类型及其沉积特征、沉积模式展开研究。研究表明,临南洼陷沙三中亚段深水重力流沉积主要发育滑塌沉积、碎屑流沉积和浊流沉积3种成因类型。滑塌沉积以包卷层理、液化砂岩脉、阶梯状小断层、变形岩层与未变形岩层叠置为典型特征。碎屑流沉积中砂质碎屑流沉积分布较广,以突变的底部接触面、块状层理、泥岩撕裂屑、土黄色泥砾、突变或不规则的上接触面为典型识别标志。浊流沉积则以正粒序层理、底部冲刷面和槽模、薄层砂泥互层、不完整的鲍马序列为典型识别标志。滑塌沉积主要发育在三角洲前缘斜坡根部,在滑塌沉积前方形成碎屑流沉积,碎屑流向前搬运的过程中,流体被稀释逐渐转化成浊流。滑塌型深水重力流沉积整体分为近源沉积、中部沉积和远源沉积3个部分: 近源沉积主要发育具变形构造的滑塌沉积和厚层块状砂质碎屑流沉积;中部沉积主要发育砂质碎屑流沉积及浊流沉积;远源沉积以薄层浊流沉积为主。     

滑塌型深水重力流沉积特征及沉积模式:以渤海湾盆地临南洼陷古近系沙三中亚段为例

综合运用钻井岩心、测录井等资料,通过岩心观察、薄片鉴定和粒度分析等方法,对渤海湾盆地临南洼陷古近系沙三中亚段深水重力流沉积类型及其沉积特征、沉积模式展开研究。研究表明,临南洼陷沙三中亚段深水重力流沉积主要发育滑塌沉积、碎屑流沉积和浊流沉积3种成因类型。滑塌沉积以包卷层理、液化砂岩脉、阶梯状小断层、变形岩层与未变形岩层叠置为典型特征。碎屑流沉积中砂质碎屑流沉积分布较广,以突变的底部接触面、块状层理、泥岩撕裂屑、土黄色泥砾、突变或不规则的上接触面为典型识别标志。浊流沉积则以正粒序层理、底部冲刷面和槽模、薄层砂泥互层、不完整的鲍马序列为典型识别标志。滑塌沉积主要发育在三角洲前缘斜坡根部,在滑塌沉积前方形成碎屑流沉积,碎屑流向前搬运的过程中,流体被稀释逐渐转化成浊流。滑塌型深水重力流沉积整体分为近源沉积、中部沉积和远源沉积3个部分:近源沉积主要发育具变形构造的滑塌沉积和厚层块状砂质碎屑流沉积;中部沉积主要发育砂质碎屑流沉积及浊流沉积;远源沉积以薄层浊流沉积为主。     

湖相重力流沉积特征及沉积模式

应用深水沉积学和地震沉积学的相关理论,通过岩心观察描述、钻测井资料分析及平面沉积相编图,对下刚果盆地A区块白垩系Pointe Indienne组深水重力流的类型、沉积特征、垂向沉积组合及沉积模式进行了探讨分析,指出该地区发育砂质碎屑流、泥质碎屑流、浊流及与重力流形成过程相关的滑动—滑塌沉积,并总结了该深水重力流的沉积模式。结果表明:砂质碎屑流沉积以块状层理细砂岩为主,含大型漂浮泥砾和泥岩撕裂屑;泥质碎屑流沉积以泥级碎屑为主,含有少量的暗色泥岩碎屑和砂质团块,见“泥包砾”结构;浊流沉积以发育完整或不完整的鲍马序列为特征;滑动—滑塌沉积具有明显的剪切滑移面,可见旋转火焰构造、砂岩扭曲杂乱分布及褶皱变形层;纵向上可识别出4种类型的重力流沉积垂向组合,以多期砂质碎屑流沉积叠置和砂质碎屑流沉积与浊流沉积叠置最为常见;研究区深水重力流沉积可分为上部扇、中部扇和外部扇3部分,上部扇以主水道沉积为主;中部扇以辫状水道和溢岸沉积为主,砂体厚度较大;外部扇以朵叶体沉积和薄层浊积岩为主,砂体厚度相对较薄。     

渤中25-1油田沙三段重力流沉积模式及油气地质意义

运用最新重力流沉积理论,以钻井岩芯、地震资料为基础,系统研究了渤海海域渤中25-1油田沙三段重力流沉积特征、类型、岩相组合、砂体空间展布特征以及沉积模式。结果表明,研究区主要发育滑塌重力流、砂质碎屑流、浊流3种重力流沉积类型,并构成5种典型的岩相组合,包括湖相细粒沉积与滑塌重力流组合（MS）、砂质碎屑流与滑塌重力流组合（DS）、砂质碎屑流与浊流组合（DT）、浊流与砂质碎屑流组合（TD）、湖相细粒沉积与浊流组合（MT）。研究区重力流沉积具有"源-坡-断-流"联控的"滑塌-砂质碎屑流-浊流"沉积过程与发育模式,其中砂质碎屑流砂体呈舌状体分布,浊流砂体则具有朵状体形态特征。储层综合评价表明,砂质碎屑流砂体粒度粗、宽厚比小、泥质含量低、物性好,是优质的重力流储层类型。对不同重力流类型沉积特征、展布形态以及储层性质的精细研究,对深水优质砂岩储层的预测具有重要的指导意义。     

断陷湖盆洼陷带重力流沉积特征与模式:以南堡凹陷东部东营组为例

利用岩心、粒度、测井信息和重力流沉积理论,系统研究了南堡凹陷东部洼陷带东营组重力流沉积特征和沉积模式。该区重力流沉积砂岩常夹于灰色、灰黑色泥岩中,砂岩相发育,其中正递变层理(含砾)中-细砂岩相(S-3)、粉砂岩相(S-4)和块状层理中-细砂岩相(S-2)发育层数最多,块状层理含砾砂岩相(S-1)次之;S-2沉积厚度最大,S-1和S-3次之。按支撑和沉积机制,将本区重力流分为浊流、砂质碎屑流、颗粒流和液化流,其中砂质碎屑流以基质支撑、冻结块状沉积为特征。不同重力流发育程度有明显差异。从砂岩层数看,浊流最多,砂质碎屑流次之,颗粒流和液化流最少;从单期沉积厚度看,砂质碎屑流最大,平均为1.17m,浊流沉积最小,仅平均为0.25m。为了回避取心的局限性、弱化重力流成因,突出具有油气储集意义的砂层概念,开展了测井岩性解释,结果表明该区重力流沉积为细砂岩或粉砂岩,单层平均厚度2.94m,最大厚度可达9.5m,其中单井中厚度在3m以上的砂体可达22层、累积达107.5m。本区重力流沉积为滑塌成因,除了(扇)三角洲前缘斜坡的自然滑塌外,断层(地震)活动或间歇式火山喷发是其关键的触发机制;断层活动除了提供滑塌的动力外,还影响着其堆积场所和沉积的结构。     

鄂尔多斯盆地南部三叠系延长组深水重力流沉积特征及其石油地质意义*

通过大量岩心观察、钻测井资料分析及野外露头观察,对鄂尔多斯盆地南部延长组长6—长7深水重力流沉积特征、触发机制、沉积过程、沉积模式及石油地质意义进行了系统分析。研究结果表明:研究区共存在滑动岩体、滑塌沉积、砂质碎屑流沉积、浊流沉积及泥质碎屑流沉积5种类型的重力流沉积物,各类型的沉积物特征明显。不同类型重力流沉积物垂向组合可分为5类,研究区重力流的形成过程可分为5个阶段:三角洲前缘沉积阶段、滑动阶段、滑塌变形阶段、砂质碎屑流及泥质碎屑流形成阶段以及浊流形成阶段。滑动、滑塌砂体多呈孤立透镜体状,砂质碎屑流砂体多以扇沟道的形式展现出来,浊流砂体多分布在扇沟道的前端或侧翼,呈席状砂展布。深水重力流砂体垂向叠置厚度大,可形成规模大的油藏,大大扩展了深湖的勘探范围。研究区长6、长7油层组砂质碎屑流砂体储集层物性较好,含油性好,是重点勘探层位。     

鄂尔多斯盆地南部三叠系延长组湖相重力流沉积细粒岩及其油气地质意义

随着页岩油气勘探开发和相关领域研究的不断深入,细粒沉积物的搬运和沉积已成为当前沉积学研究的热点问题之一,但中国中生代湖泊环境中的泥质重力流沉积尚未引起应有的关注。通过岩心观察、薄片鉴定等手段及综合研究,分析了鄂尔多斯盆地晚三叠世湖相泥质重力流沉积特征,探讨了其形成机制与成因分类。鄂尔多斯盆地三叠系延长组湖相泥页岩结构类型多样,发育泥质块体流沉积、泥质碎屑流沉积、泥质浊流沉积和泥质异重流沉积等多种重力流沉积类型。按照泥质含量将重力流划分为砂质重力流、泥质重力流和混合重力流3种亚类,并根据成因将重力流划分为滑塌体、碎屑流、浊流及异重流等4种亚类;结合成因和泥质含量,将重力流沉积共划分为12种类型。滑塌岩、碎屑岩分布于三角洲前缘斜坡脚附近;浊积岩、异重岩广泛分布于三角洲斜坡至沉积中心。认为泥质沉积物可以在强水动力条件下搬运-沉积;重力流沉积细粒物质在湖相沉积中占据很大的比例;泥质重力流对泥页岩中的碎屑物质、黏土矿物及有机质的搬运和沉积起到重要作用,因而对于页岩油气的生烃、储集性能和压裂工艺研究具有重要意义。     

Status and Trends in Research on Deep-Water Gravity Flow Deposits

Deep-water gravity flows are one of the most important sediment transport mechanisms on Earth. After 60 years of study,significant achievements have been made in terms of classification schemes,genetic mechanisms,and depositional models of deep-water gravity flows. The research history of deep-water gravity flows can be divided into five stages: incipience of turbidity current theory; formation of turbidity current theory; development of deep-water gravity flow theory; improvement and perfection of deep-water gravity flow theory; and comprehensive development of deep-water gravity flow theory. Currently,three primary classification schemes based on the sediment support mechanism,the rheology and transportation process,and the integration of sediment support mechanisms,rheology,sedimentary characteristics,and flow state are commonly used.Different types of deep-water gravity flow events form different types of gravity flow deposits. Sediment slump retransportation mainly forms muddy debris flows,sandy debris flows,and surge-like turbidity currents. Resuspension of deposits by storms leads to quasi-steady hyperpycnal turbidity currents(hyperpycnal flows). Sustainable sediment supplies mainly generate muddy debris flows,sandy debris flows,and hyperpycnal flows. Deep-water fans,which are commonly controlled by debris flows and hyperpycnal flows,are triggered by sustainable sediment supply; in contrast,deep-water slope sedimentary deposits consist mainly of debris flows that are triggered by the retransportation of sediment slumps and deep-water fine-grained sedimentary deposits are derived primarily from finegrained hyperpycnal flows that are triggered by the resuspension of storm deposits. Harmonization of classification schemes,transformation between different types of gravity flow deposit,and monitoring and reproduction of the sedimentary processes of deep-water gravity flows as well as a source-to-sink approach to document the evolution and deposition of deep-water gravity flows are the most important research aspects for future studies of deep-water gravity flows study in the future.     

The Coarse-Grained Lacustrine Slope Apron Deposits in the Moliqing Area, Yitong Basin, Northeast China

Overlapping gravity accumulation bodies were formed on the northwestern steep slope of the Shuangyang Formation in the Moliqing fault depression of northeast China. This study analyzed in detail the spatial distribution of the lithofacies and lithofacies associations of these accumulation bodies based on more than 600 m of core sections, and summarized 12 major types of lithofacies and three types of lithofacies associations: (1) the proximal zone consists of gravelly debris flows dominated by alluvial channel conglomerates; (2) the middle zone is dominated by various gravity flow deposits and traction flow deposits; and (3) the distal zone is dominated by mudstones with intercalations of sandy debris and turbidites. Combining with the grain size cumulative probability curves analysis, we determined the transformation of debris flows to sandy debris flows and to turbidity currents in the slope zone of the basin margin, and further proposed a lacustrine slope apron model that is characterized by (1) an inconstant multiple source (line source), (2) an alternation of gravity flow deposits and traction flow deposits dominated by periodical changes in a source flood flow system, and (3) the transformation of sandy debris flow deposits into distal turbidity current deposits. This sedimentary model may be applicable to other fault depressions for predicting reservoir distribution.     

重力流沉积：理论研究与野外识别

重力流沉积是（半）深海和深湖环境中一种重要的沉积现象,因此准确识别重力流沉积对恢复古代沉积环境具有重要意义。从沉积物重力流的基本理论出发,介绍四类重力流沉积的特点和野外鉴别特征。碎屑流沉积表现为颗粒大小混杂,底面平坦,板条状砾石平行层面排列;超高密度流沉积的砂岩呈厚层状或块状,砂岩内部经常出现较大砾石或泥岩碎片,泄水构...     

湖南邵阳地区茅口期晚期重力流沉积的发现及意义*

湖南邵阳市邵阳大道两侧出露的龙潭组下段(中二叠世茅口期晚期)发育一套地质特征典型、沉积序列明显的重力流沉积。重力流沉积以块状砂岩、粉砂岩及泥岩互层为主,砂岩底面发育有重荷模、槽模、工具痕及冲刷充填构造,砂岩内部有块状层理、平行层理、包卷层理及粒序层理,互层的泥岩中见类似于古网迹的痕迹化石。可识别出砂质碎屑流、浊流与滑塌沉积。剖面下部含泥砾块状砂岩发育,剖面中上部以发育薄到中厚层砂岩、粉砂岩与泥岩互层为特点。根据重力流沉积物特征及其垂向序列特征,建立了重力流沉积模式,将海底扇划分出内扇、中扇与外扇。通过与附近的短陂桥矿区的龙潭组下段沉积特征进行对比研究,结合华南地区岩相古地理特征,认为位于华南盆地范围的邵阳地区,在中二叠世茅口期晚期(龙潭组下段)发育的重力流沉积,可能意味着华南盆地在扬子陆块和华夏陆块之间的深大断裂在中二叠世末期曾经发生拉张,形成裂谷盆地。     

Features of Sandy Debris Flows of the Yanchang Formation in the Ordos Basin and Its Oil and Gas Exploration Significance

Sandy debris flow is a new genetic type of sand bodies, which has gained much attention in recent years and its corresponding theory is proved to be a significant improvement and even partial denial to the “Bouma Sequence” and “turbidite fan” deep-water sedimentary theories to some point. Oil exploration researchers are highly concerned with sandy debris flows for its key role in controlling oil and gas accumulation processes. In this article, by applying sandy debris flows theory and combining a lot work of core, outcrop observation and analysis plus seismic profile interpretation, we recognized three types of sedimentary gravity flows that are sandy debris flows, classic turbidites and slumping rocks in chang-6 member of Yanchang Formation in the deep-water area of central Ordos Basin. Among the three types, the sandy debris flows are the most prominent and possesses the best oil bearing conditions. On the contrary, the classic turbidites formed by turbidity currents are limited in distribution; therefore, previous Yanchang Formation deep-water sedimentary studies have exaggerated the importance of turbidite currents deposition. Further study showed that the area distribution of deep water gravity flow sand bodies in Yanchang Formation were controlled by the slope of the deep-water deposits and the flows had vast distribution, huge depth and prevalent advantages for oil forming, which make it one of the most favorable new areas for Ordos Basin prospecting.     

Sedimentary facies analysis and depositional model of gravity-flow deposits of the Yanchang Formation,southwestern Ordos Basin,NW China

During the deposition of the Chang-7 (Ch-7) and Chang-6 (Ch-6) units in the Upper Triassic, gravity flows were developed widely in a deep lake in the southwestern Ordos Basin, China. Based on cores, outcrops, well-logs and well-testing data, this paper documents the sedimentary characteristics of the gravity-flow deposits and constructs a depositional model. Gravity-flow deposits in the study area comprise seven lithofacies types, which are categorised into four groups: slides and slumps, debris-flow-dominated lithofacies, turbidity-current-dominated lithofacies, and deep-water mudstone-dominated lithofacies. The seven lithofacies form two sedimentary entities: sub-lacustrine fan and the slump olistolith, made up of three and two lithofacies associations, respectively. Lithofacies association 1 is a channel–levee complex with fining-/thinning-upward sequences whose main part is characterised by sandy debris flow-dominated, thick-bedded massive sandstones. Lithofacies association 2 represents distributary channelised lobes of sub-lacustrine fans, which can be further subdivided into distributary channel, channel lateral margin and inter-channel. Lithofacies association 3 is marked by non-channelised lobes of sub-lacustrine fans, including sheet-like turbidites and deep-lake mudstones. Lithofacies association 4 is represented by proximal lobes of slump olistolith, consisting of slides and slumps. Lithofacies association 5 is marked by distal lobes of slump olistolith, comprising tongue-shaped debris flow lobes and turbidite lobes. It is characterised by sandy debris flow, muddy debris flow-dominated sandstone and sandstone with classic Bouma sequences. Several factors caused the generation of gravity flows in the Ordos Basin, including sediment supply, terrain slope and external triggers, such as volcanisms, earthquakes and seasonal floods. The sediment supply of sub-lacustrine fan was most likely from seasonal floods with a high net-to-gross and incised channels. Triggered by volcanisms and earthquakes, the slump olistolith is deposited by the slumping and secondary transport of unconsolidated sediments in the delta front or prodelta with a low net-to-gross and no incised channels.     

渤海湾盆地东营凹陷碎屑流主控型深水体系沉积过程及模式

【研究目的】碎屑流是深水环境沉积物搬运和分散的重要机制,其相关的砂岩储层是含油气盆地重要的勘探目标,然而,与经典浊流及浊积系统相比,对碎屑流主控型深水体系的发育规律目前仍知之甚少。【研究方法】本文基于岩心、测井及全三维地震资料,通过系统的岩心观察描述、测井及地震资料解释,对渤海湾盆地东营凹陷始新统沙三中亚段深水体系沉积过程及模式开展研究。【研究结果】结果表明,沙三中深水体系发育九种异地搬运岩相,可概括为四大成因类型,反映了块体及流体两种搬运过程。岩相定量统计表明,该深水体系主要由碎屑流沉积构成,浊流沉积很少,碎屑流中又以砂质碎屑流为主。重力流在搬运过程中经历了滑动、滑塌、砂质碎屑流、泥质碎屑流及浊流等5个阶段演变,发育5类主要的深水沉积单元,包括滑动体、滑塌体、碎屑流水道、碎屑流朵体及浊积薄层砂。从发育规模及储层物性上,砂质碎屑流水道、朵体及砂质滑动体构成了本区最重要的深水储层类型。【结论】认为沙三中时期充足的物源供给、三角洲前缘高沉积速率、断陷期频繁的断层活动以及较短的搬运距离是碎屑流主控型深水体系形成及演化的主控因素,最终基于沉积过程、沉积样式及盆地地貌特征综合建立了碎屑流主控型深水体系沉积模式。本研究将进一步丰富深水沉积理论,为陆相深水储层预测提供借鉴。