基于环境振动的斜拉桥拉索基频识别

斜拉索是现代斜拉桥最重要的结构构件，索力在斜拉桥的施工控制和长期监测中起着重要作用。振动测试法是斜拉桥索力测定、监测和状态评估中应用最广泛的一种方法。振动法测索力的关键在于准确地识别出索的基频。本文使用自功率谱和倒频谱方法，基于MATLAB平台，开发出了斜拉桥拉索环境振动模态分析图形用户交互(GUI)工具箱，实现了斜拉索基频的快速自动识别。应用本文的方法，对福州青洲闽江主跨605m斜拉桥拉索的环境振动实测加速度数据进行了分析处理，斜拉索基频识别方便直观，结果可靠。     

考虑刚度及边界条件的短索索力求解与试验研究

建立了一个非齐次边界拉索力学模型,基于拉索线性振动理论,推导了考虑拉索抗弯刚度及边界条件的拉索频率方程;根据双曲函数的数理特性对频率方程进行了合理简化,得到了实用的频率简化方程,提出了逆过程求解索力的方法和步骤,并探讨了不同支承刚度对索力的影响。设计了室内拉索试验模型并进行了27种工况索力试验,比较了不同工况下的计算索力与实际索力,验证了本文提出的频率简化方程和逆过程求解方法的实用可靠性。     

Traffic‐induced variability in dynamic properties of cable‐stayed bridge

The traffic‐induced variability in the dynamic properties of a cable‐stayed bridge is investigated using ambient vibration measurements. Under a relatively steady wind and temperature environment, the ambient vibration test was conducted on the bridge with normal traffic conditions and totally 24 h acceleration response time histories were recorded. These data are divided into 12 sections with each data section containing 2 h measurements. Thereby the modal variability due to changing traffic loading is investigated through post‐processing of the data in each section in both amplitude and frequency domains. The result indicates that the natural frequencies of the global modes can exhibit as much as 1% variation within a day. The modal amplitudes of each mode as well as the modal deflection at each measurement position vary insignificantly. The damping ratios however are sensitive to the vibration intensity, especially when the deck vibration exceeds a certain level. Copyright © 2002 John Wiley & Sons, Ltd.     

On a modal damping identification model for non-classically damped linear building structures subjected to earthquakes

A simple modal damping identification model developed by the present authors for classically damped linear building frames is extended here to the non-classically damped case. The modal damping values are obtained with the aid of the frequency domain modulus of the roof-to-basement transfer function and the resonant frequencies of the structure (peaks of the transfer function) as well as the modal participation factors and mode shapes of the undamped structure. The assumption is made that the modulus of the transfer function of the non-classically damped structure matches the one of the classically damped structure in a discrete manner, i.e., at the resonant frequencies of that function modulus. This proposed approximate identification method is applied to a number of plane building frames with and without pronounced non-classical damping under different with respect to their frequency content earthquakes and its limitations and range of applicability are assessed with respect to the accuracy of both the identified damping ratios and that of the seismic structural response obtained by classical mode superposition and use of those identified modal damping ratios.     

Approximate soil-structure interaction analysis by a perturbation approach: The case of stiff soils

An approximate solution of the classical eigenvalue problem governing the vibrations of a structure on an elastic soil is derived through the application of a perturbation analysis. For stiff soils, the full solution is obtained as the sum of the solution for a rigid-soil and small perturbing terms related to the inverse of the soil shear modulus. The procedure leads to approximate analytical expressions for the system frequencies, modal damping ratios and participation factors for all system modes that generalize those presented by other authors for the fundamental mode. The resulting approximate expressions for the system modal properties are validated by comparison with the corresponding quantities obtained by numerical solution of the eigenvalue problem for a nine-story building. The accuracy of the proposed approach and of the classical normal mode approach is assessed through comparison with the exact frequency response of the test structure.     

ACTIVE TENDON CONTROL OF CABLE-STAYED BRIDGES

This paper considers the active vibration control of cables and cable/structure systems with an active tendon controlling the axial displacement of the cable anchor point. It is demonstrated that a force feedback based on a collocated force sensor measuring the tension in the cable is feasible and that this control configuration can be associated with control laws with guaranteed stability properties. Experimental results are presented on a cable with small sag and on a cable/structure system. They show that the control algorithm can provide the structure with several percent of active damping and that the parametric resonance does not occur when the natural frequency of the structure is twice that of the cable.     

MODAL ANALYSIS OF SOFT-SOIL SITES INCLUDING RADIATION DAMPING

For the one-dimensional analysis of soft-soil layers on an elastic half-space, a general form of analytical solution is developed for converting radiation damping due to energy leaking back to the half-space into equivalent modal damping, allowing the modal analysis technique to be extended to a site where radiation damping has to be accounted for. Closed-form solutions for equivalent modal damping ratios and effective modal participation factors are developed for a single layer with a shear wave velocity distribution varying from constant to linearly increasing with depth. Compact and recursive forms of solutions for equivalent modal damping ratios are developed for a system with an arbitrary number of homogeneous layers on an elastic half-space. Comparisons with numerical solutions show that the modal solutions are accurate. The nominal frequency of a site, i.e. the inverse of four times the total shear wave travel time through the layers, is an important parameter for estimating the high mode frequencies. A parameter study shows that for the same impedance ratio of the bottom layer to the elastic half-space, a system of soil layers with an increasing soil rigidity with depth has, in general, larger peak modal amplifications at the ground surface than does a single homogeneous layer on an elastic half-space, while a system with a decreasing soil rigidity with depth has smaller modal peak amplifications. © 1997 by John Wiley & Sons, Ltd.     

Towards a seismic design method for plane steel frames using equivalent modal damping ratios

A method for seismic design of plane steel moment resisting frames based on the use of equivalent modal damping ratios is developed. The method determines the design base shear of the structure through spectrum analysis using rationally obtained equivalent modal damping ratios instead of the crude strength reduction (behavior) factor. An equivalent linear structure, which retains the mass and initial stiffness of the original non-linear structure and takes into account geometrical non-linearity and inelasticity in the form of equivalent, time-invariant, modal damping ratios is established. The equivalent damping ratios for the first few significant modes are numerically computed by first iteratively forming a frequency response transfer function modulus until it satisfies certain smoothness criteria and then by solving a set of non-linear algebraic equations. Thus, design equations providing equivalent damping ratios as functions of period and allowable deformation and damage are constructed using extensive numerical data coming from plane steel moment resisting frames excited by various seismic motions. These equations can be used in conjunction with a design spectrum, appropriately constructed for high damping values, and modal synthesis tools to calculate the seismic design forces of the structure. The proposed method is illustrated by numerical examples. It is concluded that unlike the usual approach of seismic codes employing a single common value of the strength reduction factor value for all modes, the proposed approach working with deformation and damage dependent equivalent modal damping ratios leads to more accurate and deformation and damage controlled results.     

System identification of linear structures based on Hilbert–Huang spectral analysis. Part 1: normal modes

Based on the Hilbert–Huang spectral analysis, a method is proposed to identify multi‐degree‐of‐freedom (MDOF) linear systems using measured free vibration time histories. For MDOF systems, the normal modes have been assumed to exist. In this method, the measured response data, which are polluted by noises, are first decomposed into modal responses using the empirical mode decomposition (EMD) approach with intermittency criteria. Then, the Hilbert transform is applied to each modal response to obtain the instantaneous amplitude and phase angle time histories. A linear least‐square fit procedure is proposed to identify the natural frequency and damping ratio from the instantaneous amplitude and phase angle for each modal response. Based on a single measurement of the free vibration time history at one appropriate location, natural frequencies and damping ratios can be identified. When the responses at all degrees of freedom are measured, the mode shapes and the physical mass, damping and stiffness matrices of the structure can be determined. The applications of the proposed method are illustrated using three linear systems with different dynamic characteristics. Numerical simulation results demonstrate that the proposed system identification method yields quite accurate results, and it offers a new and effective tool for the system identification of linear structures in which normal modes exist. Copyright © 2003 John Wiley & Sons, Ltd.     

拉索端部弹性约束振动控制研究(Ⅱ)——试验验证

在索端沿轴向设置弹性约束,对拉索振动轴向被动控制进行了试验研究。研究了支座移动对拉索振动频率的影响;验证了弹性约束对拉索振动的减振效果,讨论了阻尼系数和弹簧刚度对减振效果的影响;最后验证文献[10]中理论研究的正确性。     

Experimental investigation of adjacent buildings connected by fluid damper

Dynamic characteristic and harmonic response of adjacent buildings connected by fluid damper were experimentally investigated using model buildings and fluid damper. Two building models were constructed as two three-storey shear buildings of different natural frequencies. Model fluid damper connecting the two buildings was designed as linear viscous damper of which damping coefficient could be adjusted. The two buildings without fluid dampers connected were first tested to obtain their individual dynamic characteristics and responses to harmonic excitation. The tests were then carried out to determine modal damping ratios of the adjacent buildings connected by the fluid damper of different damping coefficients and at different locations. Optimal damper damping coefficient and location for achieving the maximum modal damping ratio were thus found. The measured modal damping ratios and harmonic responses of the building-fluid damper system were finally compared with those from the individual buildings. The comparison showed that the fluid damper of proper parameter could significantly increase the modal damping ratio and tremendously reduce the dynamic response of both buildings. Copyright © 1999 John Wiley & Sons, Ltd.     

Output-only identification of the modal and physical properties of structures using free vibration response

The viability of a complete structural characterization of civil structures is explored and discussed. In particular, the identification of modal (i.e. natural frequencies, damping ratios and modal shapes) and physical properties (i.e. mass and stiffness) using only the structure’s free decay response is studied. To accomplish this, modal analysis from free vibration response only (MAFVRO) and mass modification (MM) methodologies are engaged along with Wavelet based techniques for optimal signal processing and modal reconstruction. The methodologies are evaluated using simulated and experimental data. The simulated data are extracted from a simple elastic model of a 5 story shear building and from a more realistic nonlinear model of a RC frame structure. The experimental data are gathered from shake table test of a 2-story scaled shear building. Guidelines for the reconstruction procedure from the data are proposed as the quality of the identified properties is shown to be governed by adequate selection of the frequency bands and optimal modal shape reconstruction. Moreover, in cases where the structure has undergone damage, the proposed identification scheme can also be applied for preliminary assessment of structural health.     

基于复阻尼理论的混合结构Rayleigh阻尼模型

混合结构的阻尼矩阵不满足经典阻尼条件,导致传统的模态叠加法无法适用。复阻尼理论无法适用于时域计算,其自由振动响应中存在发散现象。针对混合结构的阻尼矩阵非比例性和复阻尼理论的时域发散性,基于频域等效原则构建了求解Rayleigh阻尼系数的数学优化模型,进而得到与复阻尼理论等效的Rayleigh阻尼运动方程。算例分析表明:依据位移时程响应和结构等效阻尼比可证明Rayleigh阻尼运动方程的正确性。基于本文研究成果,等效复阻尼理论的混合结构Rayleigh阻尼运动方程可直接采用模态叠加法,结合其确定的结构等效阻尼比,为混合结构的振型分解反应谱法提供理论依据。     

Damping estimation of high-rise buildings considering structural modal directions

One widespread problem in damping estimation of high-rise buildings is the neglect of structural modal directions, which may induce beating in measured dynamic responses along building geometric axes and thereby induce errors in damping estimations to some extent. Based on a proposed two degrees of freedom (2-DOF) simulation model, the effects of neglecting the modal directions on damping estimate are systematically investigated. The results show that the angular differences between the modal directions and the building geometric axes, as well as the frequency difference between the involved modes, both have significant effects on the damping estimate of high-rise buildings. This paper proposes a spectral method to determine the modal directions of high-rise buildings and further validate this method by an analysis of full-scale measurements from four skyscrapers. The damping ratios estimated based on the responses along the identified modal directions are more accurate than those based on those measured along the building geometric axes. Furthermore, an empirical prediction model for damping ratio of high-rise buildings with heights over 200 m is proposed based on the field measured damping results of several buildings with consideration of the modal directions. The objective of this study is to improve the accuracy of damping estimation of high-rise buildings and therefore provide useful information for the structural design of future skyscrapers.     

地震作用下智能相邻建筑的主动锚索控制

研究了应用主动锚索控制装置控制相邻建筑地震响应的有效性。首先，建立了主动锚索－相邻建筑系统的运动方程；然后应用广义振型分析方法，寻求了主动锚索联结的相邻建筑的力学特性，特别是振型阻尼比；最后，在频率域内应用广义振型分析与虚拟激励相结合的方法，建立了主动锚索控制装置联结相邻建筑的随机地震响应的分析方法。应用本文建立的公式，我们编制了计算机程序，进行了广泛的参数研究，以评价控制装置的有效性，并确定最优传感器类型及控制装置参数。研究表明，如果应用速度传感器，并能适当地选择主动锚索控制器的参数，则可以显著地提高系统的振型阻尼比，减小两个结构的地震响应。     

内共振对斜拉索面内瞬时相频特性的影响

为研究内共振对斜拉索的瞬时相频特性的影响,利用多尺度法对拉索面内分布激励下的运动方程进行摄动求解,分别得到不计内共振和计内共振2种状态下面内主共振响应的近似解析式以及其稳态方程,最后采用Hilbert变换分别得到两者面内响应与激励的瞬时相位差及其幅值.同时在小垂度条件下,研究了不同索力下内共振对拉索面内响应与激励的瞬时...     

A reassessment of dynamic characteristics of the Quincy Bayview Bridge using output‐only identification techniques

A reassessment of the dynamic characteristics of the 542 m cable‐stayed Bayview Bridge in Quincy, Illinois, is presented using a newly developed output‐only system identification technique. The technique is applied to an extensive set of ambient vibration response data acquired from the bridge in 1987. Vertical, torsional and transverse modal frequencies of the deck are identified, and uncertainty in damping values are estimated using an automated procedure on several redundant measurements at four locations. Important practical implementation issues associated with the implementation of the procedure and selection of algorithm design parameters for stochastic subspace identification techniques are discussed. An overall mean and standard deviation of damping of 1.0±0.8% is estimated considering all identified vertical, torsional and transverse modes in the 0–2 Hz band. The mean damping for the fundamental vertical mode (0.37 Hz) is identified as 1.4±0.5%, and for the first coupled torsion–transverse mode (0.56 Hz) is identified as 1.1±0.8%. Variability in the damping estimates is shown to decrease as estimated modal RMS acceleration levels increase. Standard deviations on estimated damping range from 0.05% to 2%. The results are shown to be a substantial improvement in the evaluation of damping compared to earlier spectral analysis conducted on the same data set. Copyright © 2005 John Wiley & Sons, Ltd.     

规则型隔震房屋的自振特性和地震反应分析方法

文中根据规则型隔震房屋的刚度、质量和阻尼分布的特点，改进了阻尼比的简化计算表达式。此外还归纳给出了自振周期、振型和地震反应计算公式。文中还将我们提出的隔震结构振型阻尼比公式与Kelly的相应公式进行了数值比较，两式的复杂程度虽几无差异，但文中的公式更为精确。文中提出的简化计算公式可以方便地在一般房屋结构隔震方案设计和地震反应的振型叠加分析中应用。     

Approximate soil–structure interaction analysis by a perturbation approach: The case of soft soils

An approximate solution of the classical eigenvalue problem governing the vibrations of a relatively stiff structure on a soft elastic soil is derived through the application of a perturbation analysis. The full solution is obtained as the sum of the solution for an unconstrained elastic structure and small perturbing terms related to the ratio of the stiffness of the soil to that of the superstructure. The procedure leads to approximate analytical expressions for the system frequencies, modal damping ratios and participation factors for all system modes that generalize those presented earlier for the case of stiff soils. The resulting approximate expressions for the system modal properties are validated by comparison with the corresponding quantities obtained by numerical solution of the eigenvalue problem for a nine-story building. The accuracy of the proposed approach and of the classical normal mode approach is assessed through comparison with the exact frequency response of the test structure.     

基于复模态的有限元模型修正算法

针对地下结构地震响应分析中无限地基辐射阻尼问题，引入复模态情况下的具有非简化的堆积阻尼矩阵的阻尼模型，并针对具有集中质量阵的阻尼模型提出了合并与质量有关的阻尼和堆积阻尼的思想，并据此提出了一种修正此类有限元模型的两步法，首先从复模态参数中提取实模态参数，采用基于模态残余力的识别算法修正刚度矩阵，然后根据复模态参数和已得的刚度矩阵来识别阻尼模型中的刚度参与系数和质量阻尼堆积阻尼联合矩阵。