Chromium solubility in anhydrous Phase B

The crystal structure and chemical composition of a crystal of (Mg_14?x Cr _x )(Si_5?x Cr _x )O₂₄ (x ≈ 0.30) anhydrous Phase B (Anh-B) synthesized in the model system MgCr₂O₄–Mg₂SiO₄ at 12 GPa and 1600 °C have been investigated. The compound was found to be orthorhombic, space group Pmcb, with lattice parameters a = 5.900(1), b = 14.218(2), c = 10.029(2) Å, V = 841.3(2) Å³ and Z = 2. The structure was refined to R ₁ = 0.065 using 1492 independent reflections. Chromium was found to substitute for both Mg at the M3 site (with a mean bond distance of 2.145 Å) and Si at the octahedral Si1 site (mean bond distance: 1.856 Å), according to the reaction Mg²⁺ + Si⁴⁺ = 2Cr³⁺. Such substitutions cause a reduction in the volume of the M3 site and an increase in the volume of the Si-dominant octahedron with respect to the values typically observed for pure Anh-B and Fe²⁺-bearing Anh-B. Taking into account that Cr³⁺ is not expected to be Jahn–Teller active, it appears that both the Cr³⁺–for–Mg and Cr³⁺–for–Si substitutions in the Anh-B structure decrease the distortion of the octahedra. Electron microprobe analysis gave the Mg_13.66(8)Si_4.70(6)Cr_0.62(4)O₂₄ stoichiometry for the studied phase. The successful synthesis of this phase provides new information for the possible mineral assemblages occurring in the Earth’s deep upper mantle and shed new light on the so-called X discontinuity that has been observed at 275–345 km depth in several subcontinental and subduction zone environments.     

Synthesis,TEM characterization and thermal behaviour of LiNiSi<Subscript>2</Subscript>O<Subscript>6</Subscript> pyroxene

A pyroxene with composition LiNiSi₂O₆ was synthesized at T = 1,473 K and P = 2.0 GPa; the cell parameters at T = 298 K are a = 9.4169(6) Å, b = 8.4465(7) Å, c = 5.2464(3) Å, β = 110.534(6)°, V = 390.78(3) Å³. TEM examination of the LiNiSi₂O₆ pyroxene showed the presence of h + k odd reflections indicative of a primitive lattice, and of antiphase domains obtained by dark field imaging of the h + k odd reflections. A HT in situ investigation was performed by examining TEM selected area diffraction patterns collected at high temperature and synchrotron radiation powder diffraction. In HTTEM the LiNiSi₂O₆ was examined together with LiCrSi₂O₆ pyroxene. In LiCrSi₂O₆ the h + k odd critical reflections disappear at about 340 K; they are sharp up to the transition temperature and do not change their shape until they disappear. In LiNiSi₂O₆ the h + k odd reflections are present up to sample deterioration at 650 K. A high temperature synchrotron radiation powder diffraction investigation was performed on LiNiSi₂O₆ between 298 and 773 K. The analysis of critical reflections and of changes in cell parameters shows that the space group is P-centred up to the highest temperature. The comparative analysis of the thermal and spontaneous strain contributions in P2₁/c and C2/c pyroxenes indicates that the high temperature strain in P-LiNiSi₂O₆ is very similar to that due to thermal strain only in C2/c spodumene and that a spontaneous strain contribution related to pre-transition features is not apparent in LiNiSi₂O₆. A different high-temperature behaviour in LiNiSi₂O₆ with respect to other pyroxenes is suggested, possibly in relation with the presence of Jahn–Teller distortion of the M1 polyhedron centred by low-spin Ni³⁺.     

High-pressure displacive phase transition of a natural Mg-rich pigeonite

A high-pressure single-crystal X-ray diffraction study has been carried out on a P2₁/c natural Mg-rich pigeonite sample with composition ca. Wo₆En₇₆Fs₁₈ using a diamond anvil-cell. The unit-cell parameters were determined at 14 different pressures to 7.14 GPa. The sudden disappearance of the b-type reflections (h + k = odd) and a strong discontinuity (about 2.8%) in the unit-cell volume indicated a first-order P2₁/c–C2/c phase transition between 4.66 and 4.88 GPa. The P(V) data of the P2₁/c phase were fitted to 4.66 GPa by a third-order Birch–Murnaghan equation of state (BM3 EoS), whereas the limited number of experimental data collected within the C2/c phase between 4.88 and 7.14 GPa were fitted using the same equation of state but with K′ constrained to the value obtained for the P2₁/c fitting. The equation of state coefficients are V ₀ = 424.66(6) ų, K _T0 = 104(2) GPa and K′ = 8(1) for the P2₁/c phase, and V ₀ = 423.6(1) ų, K _T0 = 112.4(8) GPa, and K′ fixed to 8(1) for the C2/c phase. The axial moduli for a, b, and c for the P2₁/c phase were obtained using also a BM3-EoS, while for the C2/c phase only a linear calculation could be performed, and therefore the same approach was applied for comparison also to the P2₁/c phase. In general the C2/c phase exhibits axial compressibilities (β _c > β _a >> β _b) lower than those of the P2₁/c phase (β _b > β _c ≈ β _a; similar to those found in previous studies in clinopyroxenes and orthopyroxenes). The lower compressibility of the C2/c phase compared with that of the P2₁/c could be ascribed to the greater stiffness along the b direction. A previously published relationship between P _c and M2 average cation radius (i.r.) has been updated using all the literature data on P2₁/c clinopyroxene containing large cations at M2 site and our new data. The following weighted regression was obtained: P _c (GPa) = 26(4) ? 28(5) ×  i.r (Å), R ² = 0.97. This improved equation can be used to predict the critical pressure of natural P2₁/c clinopyroxene samples just knowing the composition at M2 site.     

Behavior of 10-Å phase at low temperatures

The thermal evolution of 10-Å phase Mg₃Si₄O₁₀(OH)₂·H₂O, a phyllosilicate which may have an important role in the storage/release of water in subducting slabs, was studied by X-ray single-crystal diffraction in the temperature range 116–293 K. The lattice parameters were measured at several intervals both on cooling and heating. The structural model was refined with intensity data collected at 116 K and compared to the model refined at room temperature. As expected for a layer silicate on cooling in this temperature range, the a and b lattice parameters undergo a small linear decrease, α _a  = 1.7(4) 10^?6 K^?1 and α _b  = 1.9(4) 10^?6 K^?1, where α is the linear thermal expansion coefficient. The greater variation is along the c axis and can be modeled with the second order polynomial c _T  = c ₂₉₃(1 + 6.7(4)10^?5 K^?1ΔT + 9.5(2.5)10^?8 K^?2(ΔT)²) where ΔT = T ? 293 K; the monoclinic angle β slightly increased. The cell volume thermal expansion can be modeled with the polynomial V _T  = V ₂₉₃ (1 + 8.0 10^?5 K^?1 ΔT + 1.4 10^?7 K^?2 (ΔT)²) where ΔT = T ? 293 is in K and V in ų. These variations were similar to those expected for a pressure increase, indicating that T and P effects are approximately inverse. The least-squares refinement with intensity data measured at 116 K shows that the volume of the SiO₄ tetrahedra does not change significantly, whereas the volume of the Mg octahedra slightly decreases. To adjust for the increased misfit between the tetrahedral and octahedral sheets, the tetrahedral rotation angle α changes from 0.58° to 1.38°, increasing the ditrigonalization of the silicate sheet. This deformation has implications on the H-bonds between the water molecule and the basal oxygen atoms. Furthermore, the highly anisotropic thermal ellipsoid of the H₂O oxygen indicates positional disorder, similar to the disorder observed at room temperature. The low-temperature results support the hypothesis that the disorder is static. It can be modeled with a splitting of the interlayer oxygen site with a statistical distribution of the H₂O molecules into two positions, 0.6 Å apart. The resulting shortest O_bas–O_W distances are 2.97 Å, with a significant shortening with respect to the value at room temperature. The low-temperature behavior of the H-bond system is consistent with that hypothesized at high pressure on the basis of the Raman spectra evolution with P.     

Stability at high-pressure,elastic behaviour and pressure-induced structural evolution of CsAlSi<Subscript>5</Subscript>O<Subscript>12</Subscript>, a potential host for nuclear waste

The elastic and structural behaviour of the synthetic zeolite CsAlSi₅O₁₂ (a = 16.753(4), b = 13.797(3) and c = 5.0235(17) Å, space group Ama2, Z = 2) were investigated up to 8.5 GPa by in situ single-crystal X-ray diffraction with a diamond anvil cell under hydrostatic conditions. No phase-transition occurs within the P-range investigated. Fitting the volume data with a third-order Birch–Murnaghan equation-of-state gives: V ₀ = 1,155(4) ų, K _T0 = 20(1) GPa and K′ = 6.5(7). The “axial moduli” were calculated with a third-order “linearized” BM-EoS, substituting the cube of the individual lattice parameter (a ³, b ³, c ³) for the volume. The refined axial-EoS parameters are: a ₀ = 16.701(44) Å, K _T0a = 14(2) GPa (β_a = 0.024(3) GPa^?1), K′ _a = 6.2(8) for the a-axis; b ₀ = 13.778(20) Å, K _T0b = 21(3) GPa (β_b = 0.016(2) GPa^?1), K′ _b = 10(2) for the b-axis; c ₀ = 5.018(7) Å, K _T0c = 33(3) GPa (β_c = 0.010(1) GPa^?1), K′ _c = 3.2(8) for the c-axis (K _T0a:K _T0b:K _T0c = 1:1.50:2.36). The HP-crystal structure evolution was studied on the basis of several structural refinements at different pressures: 0.0001 GPa (with crystal in DAC without any pressure medium), 1.58(3), 1.75(4), 1.94(6), 3.25(4), 4.69(5), 7.36(6), 8.45(5) and 0.0001 GPa (after decompression). The main deformation mechanisms at high-pressure are basically driven by tetrahedral tilting, the tetrahedra behaving as rigid-units. A change in the compressional mechanisms was observed at P ≤ 2 GPa. The P-induced structural rearrangement up to 8.5 GPa is completely reversible. The high thermo-elastic stability of CsAlSi₅O_12, the immobility of Cs at HT/HP-conditions, the preservation of crystallinity at least up to 8.5 GPa and 1,000°C in elastic regime and the extremely low leaching rate of Cs from CsAlSi₅O₁₂ allow to consider this open-framework silicate as functional material potentially usable for fixation and deposition of Cs radioisotopes.     

Structural evolution of hemimorphite at high pressure up to 4.2 GPa

The high-pressure structural evolution of hemimorphite, Zn₄Si₂O₇(OH)₂·H₂O, a = 8.3881(13), b = 10.7179(11), c = 5.1311(9) Å, V = 461.30(12) Å³, space group Imm2, Z = 2, was studied by single-crystal X-ray diffraction with a diamond anvil cell under hydrostatic conditions up to 4.2 GPa. In the pressure range of 0.0001–2.44 GPa, the unit-cell parameters change almost linearly. The phase transition (probably of the second order) with symmetry reduction from Imm2 (hemimorphite-I) to Pnn2 (hemimorphite-II) was found near 2.5 GPa. The structure compressibility increases somewhat above the phase transition. Namely, the initial unit-cell volume decreases by 3.6% at 2.44 GPa and by 7.2% at 4.20 GPa. The hemimorphite framework can be described as built up of secondary building units (SBU) Zn₄Si₂O₇(OH)₂. These blocks are combined to form the rods arranged along the c-axis; these rods are multiplied by basic and I-translations of orthorhombic unit cell. The symmetry reduction is caused by the rotation of the rods along their axis. In hemimorphite-I, the compression affects mainly the SBU dimensions, whereas a rectangular section of the channels having mm2 symmetry remains practically unchanged. An appreciable decrease in this section in hemimorphite-II is determined by its oblique distortion with the loss of m planes. It results from opposite rotation of adjacent SBU, which also leads into the loss of I-translation. In hemimorphite-I, the coordination of H₂O molecules is fourfold planar; the hydrogen-bonded hydroxyls and H₂O molecules form infinite ribbons along the c-axis. In hemimorphite-II, an additional short H₂O–O contact appears as a result of asymmetric deformation of the channels. The appearance of this new contact provides the possibility for re-orientation of hydrogen bonds. The planar coordination of H₂O molecules changes to tetrahedral and the ribbons are transformed to islands (OH)₂–H₂O.     

Elastic behavior of vanadinite,Pb<Subscript>10</Subscript>(VO<Subscript>4</Subscript>)<Subscript>6</Subscript>Cl<Subscript>2</Subscript>, a microporous non-zeolitic mineral

The high-pressure behavior of a vanadinite (Pb₁₀(VO₄)₆Cl₂, a = b = 10.3254(5), c = 7.3450(4) Å, space group P6₃/m), a natural microporous mineral, has been investigated using in-situ HP-synchrotron X-ray powder diffraction up to 7.67 GPa with a diamond anvil cell under hydrostatic conditions. No phase transition has been observed within the pressure range investigated. Axial and volume isothermal Equations of State (EoS) of vanadinite were determined. Fitting the P–V data with a third-order Birch-Murnaghan (BM) EoS, using the data weighted by the uncertainties in P and V, we obtained: V ₀ = 681(1) Å³, K ₀ = 41(5) GPa, and K′ = 12.5(2.5). The evolution of the lattice constants with P shows a strong anisotropic compression pattern. The axial bulk moduli were calculated with a third-order “linearized” BM-EoS. The EoS parameters are: a ₀ = 10.3302(2) Å, K ₀(a) = 35(2) GPa and K′(a) = 10(1) for the a-axis; c ₀ = 7.3520(3) Å, K ₀(c) = 98(4) GPa, and K′(c) = 9(2) for the c-axis (K ₀(a):K ₀(c) = 1:2.80). Axial and volume Eulerian-finite strain (fe) at different normalized stress (Fe) were calculated. The weighted linear regression through the data points yields the following intercept values: Fe _a (0) = 35(2) GPa for the a-axis, Fe _c (0) = 98(4) GPa for the c-axis and Fe _V (0) = 45(2) GPa for the unit-cell volume. The slope of the regression lines gives rise to K′ values of 10(1) for the a-axis, 9(2) for the c-axis and 11(1) for the unit cell-volume. A comparison between the HP-elastic response of vanadinite and the iso-structural apatite is carried out. The possible reasons of the elastic anisotropy are discussed.     

Seismic source characteristics in Kachchh and Saurashtra regions of Western India: <Emphasis Type="Italic">b</Emphasis>-value and fractal dimension mapping of aftershock sequences

Seismic source characteristics in the Kachchh rift basin and Saurashtra horst tectonic blocks in the stable continental region (SCR) of western peninsular India are studied using the earthquake catalog data for the period 2006–2011 recorded by a 52-station broadband seismic network known as Gujarat State Network (GSNet) running by Institute of Seismological Research (ISR), Gujarat. These data are mainly the aftershock sequences of three mainshocks, the 2001 Bhuj earthquake (M _w 7.7) in the Kachchh rift basin, and the 2007 and 2011 Talala earthquakes (M _w ≥ 5.0) in the Saurashtra horst. Two important seismological parameters, the frequency–magnitude relation (b-value) and the fractal correlation dimension (D _c) of the hypocenters, are estimated. The b-value and the D _c maps indicate a difference in seismic characteristics of these two tectonic regions. The average b-value in Kachchh region is 1.2 ± 0.05 and that in the Saurashtra region 0.7 ± 0.04. The average D _c in Kachchh is 2.64 ± 0.01 and in Saurashtra 2.46 ± 0.01. The hypocenters in Kachchh rift basin cluster at a depth range 20–35 km and that in Saurashtra at 5–10 km. The b-value and D _c cross sections image the seismogenic structures that shed new light on seismotectonics of these two tectonic regions. The mainshock sources at depth are identified as lower b-value or stressed zones at the fault end. Crustal heterogeneities are well reflected in the maps as well as in the cross sections. We also find a positive correlation between b- and D _c-values in both the tectonic regions.     

Compressional behavior of omphacite to 47 GPa

Omphacite is an important mineral component of eclogite. Single-crystal synchrotron X-ray diffraction data on natural (Ca, Na) (Mg, Fe, Al)Si₂O₆ omphacite have been collected at the Advanced Photon Source beamlines 13-BM-C and 13-ID-D up to 47 GPa at ambient temperature. Unit cell parameter and crystal structure refinements were carried out to constrain the isothermal equation of state and compression mechanism. The third-order Birch–Murnaghan equation of state (BM3) fit of all data gives V ₀ = 423.9(3) Å³, K _T0 = 116(2) GPa and K _T0′ = 4.3(2). These elastic parameters are consistent with the general trend of the diopside–jadeite join. The eight-coordinated polyhedra (M2 and M21) are the most compressible and contribute to majority of the unit cell compression, while the SiO₄ tetrahedra (Si1 and Si2) behave as rigid structural units and are the most incompressible. Axial compressibilities are determined by fitting linearized BM3 equation of state to pressure dependences of unit cell parameters. Throughout the investigated pressure range, the b-axis is more compressible than the c-axis. The axial compressibility of the a-axis is the largest among the three axes at 0 GPa, yet it quickly drops to the smallest at pressures above 5 GPa, which is explained by the rotation of the stiffest major compression axis toward the a-axis with the increase in pressure.     

Compressibility of strontium orthophosphate Sr<Subscript>3</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript> at high pressure

High pressure in situ synchrotron X-ray diffraction experiment of strontium orthophosphate Sr₃(PO₄)₂ has been carried out to 20.0 GPa at room temperature using multianvil apparatus. Fitting a third-order Birch–Murnaghan equation of state to the P–V data yields a volume of V ₀ = 498.0 ± 0.1 Å³, an isothermal bulk modulus of K _T  = 89.5 ± 1.7 GPa, and first pressure derivative of K _T ′ = 6.57 ± 0.34. If K _T ′ is fixed at 4, K _T is obtained as 104.4 ± 1.2 GPa. Analysis of axial compressible modulus shows that the a-axis (K _a  = 79.6 ± 3.2 GPa) is more compressible than the c-axis (K _c  = 116.4 ± 4.3 GPa). Based on the high pressure Raman spectroscopic results, the mode Grüneisen parameters are determined and the average mode Grüneisen parameter of PO₄ vibrations of Sr₃(PO₄)₂ is calculated to be 0.30(2).     

Thermal equation of state of natural tourmaline at high pressure and temperature

Synchrotron-based in situ angle-dispersive X-ray diffraction experiments were conducted on a natural uvite-dominated tourmaline sample by using an external-heating diamond anvil cell at simultaneously high pressures and temperatures up to 18 GPa and 723 K, respectively. The angle-dispersive X-ray diffraction data reveal no indication of a structural phase transition over the P–T range of the current experiment in this study. The pressure–volume–temperature data were fitted by the high-temperature Birch–Murnaghan equation of state. Isothermal bulk modulus of K ₀ = 96.6 (9) GPa, pressure derivative of the bulk modulus of \(K_{0}^{\prime } = 12.5 \;(4)\), thermal expansion coefficient of α ₀ = 4.39 (27) × 10^?5 K^?1 and temperature derivative of the bulk modulus (?K/?T) _P  = ?0.009 (6) GPa K^?1 were obtained. The axial thermoelastic properties were also obtained with K _a0 = 139 (2) GPa, \(K_{a0}^{\prime }\) = 11.5 (7) and α _a0 = 1.00 (11) × 10^?5 K^?1 for the a-axis, and K _c0 = 59 (1) GPa, \(K_{c0}^{\prime }\) = 11.4 (5) and α _c0 = 2.41 (24) × 10^?5 K^?1 for the c-axis. Both of axial compression and thermal expansion exhibit large anisotropic behavior. Thermoelastic parameters of tourmaline in this study were also compared with that of the other two ring silicates of beryl and cordierite.     

Clinopyroxenes from mantle-related xenocrysts in alkaline basalts from Hannuoba (China): augite–pigeonite exsolutions and their thermal significance

Optically homogeneous augite xenocrysts, closely associated with spinel–peridotite nodules, occur in alkali basalts from Hannuoba (Hebei province, China). They were studied by electron and X-ray diffraction to define the occurrence and significance of pigeonite exsolution microtextures. Sub-calcic augite (Wo₃₄) exsolved into En_62–62Fs_25–21Wo_13–17 pigeonite and En_46–45Fs_14–14Wo_40–42 augite, as revealed by TEM through diffuse coarser (001) lamellae (100–300 Å) and only incipient (100) thinner ones (<70 Å). C2/c augite and P2₁/c pigeonite lattices, measured by CCD-XRD, relate through a(Aug)?a(Pgt), b(Aug)?b(Pgt), c(Aug)≠c(Pgt) [5.278(1) vs 5.189(1)Å] and β(Aug)≠β(Pgt) [106.55(1) vs 108.55(2)°]. Cell and site volumes strongly support the hypothesis that the augite xenocrysts crystallised at mantle depth from alkaline melts. After the augite xenocrysts entered the magma, (001) lamellae first formed by spinodal decomposition at a T_min of about 1,100 °C, and coarsened during very rapid transport to the surface; in a later phase, possibly on cooling, incipient (100) lamellae then formed.     

High-pressure phase transitions of CaRhO<Subscript>3</Subscript> perovskite

High-pressure phase transitions of CaRhO₃ perovskite were examined at pressures of 6–27 GPa and temperatures of 1,000–1,930°C, using a multi-anvil apparatus. The results indicate that CaRhO₃ perovskite successively transforms to two new high-pressure phases with increasing pressure. Rietveld analysis of powder X-ray diffraction data indicated that, in the two new phases, the phase stable at higher pressure possesses the CaIrO₃-type post-perovskite structure (space group Cmcm) with lattice parameters: a = 3.1013(1) Å, b = 9.8555(2) Å, c = 7.2643(1) Å, V _m  = 33.43(1) cm³/mol. The Rietveld analysis also indicated that CaRhO₃ perovskite has the GdFeO₃-type structure (space group Pnma) with lattice parameters: a = 5.5631(1) Å, b = 7.6308(1) Å, c = 5.3267(1) Å, V _m  = 34.04(1) cm³/mol. The third phase stable in the intermediate P, T conditions between perovskite and post-perovskite has monoclinic symmetry with the cell parameters: a = 12.490(3) Å, b = 3.1233(3) Å, c = 8.8630(7) Å, β = 103.96(1)°, V _m  = 33.66(1) cm³/mol (Z = 6). Molar volume changes from perovskite to the intermediate phase and from the intermediate phase to post-perovskite are –1.1 and –0.7%, respectively. The equilibrium phase relations determined indicate that the boundary slopes are large positive values: 29 ± 2 MPa/K for the perovskite—intermediate phase transition and 62 ± 6 MPa/K for the intermediate phase—post-perovskite transition. The structural features of the CaRhO₃ intermediate phase suggest that the phase has edge-sharing RhO₆ octahedra and may have an intermediate structure between perovskite and post-perovskite.     

The compressibility of Fe- and Al-bearing phase D to 30 GPa

High-pressure in situ X-ray diffraction experiment of Fe- and Al-bearing phase D (Mg_0.89Fe_0.14Al_0.25Si_1.56H_2.93O₆) has been carried out to 30.5 GPa at room temperature using multianvil apparatus. Fitting a third-order Birch–Murnaghan equation of state to the P–V data yields values of V ₀ = 86.10 ± 0.05 ų; K ₀ = 136.5 ± 3.3 GPa and K′ = 6.32 ± 0.30. If K′ is fixed at 4.0 K ₀ = 157.0 ± 0.7 GPa, which is 6% smaller than Fe–Al free phase D reported previously. Analysis of axial compressibilities reveals that the c-axis is almost twice as compressible (K _c  = 93.6 ± 1.1 GPa) as the a-axis (K _a  = 173.8 ± 2.2 GPa). Above 25 GPa the c/a ratio becomes pressure independent. No compressibility anomalies related to the structural transitions of H-atoms were observed in the pressure range to 30 GPa. The density reduction of hydrated subducting slab would be significant if the modal amount of phase D exceeds 10%.     

X-ray single-crystal and Raman study of (Na<Subscript>0.86</Subscript>Mg<Subscript>0.14</Subscript>)(Mg<Subscript>0.57</Subscript>Ti<Subscript>0.43</Subscript>)Si<Subscript>2</Subscript>O<Subscript>6</Subscript>, a new pyroxene synthesized at 7 GPa and 1700 °C

A new pyroxene with formula (Na_0.86Mg_0.14)(Mg_0.57Ti_0.43)Si₂O₆, synthesized in a high-pressure toroidal ‘anvil-with-hole’ apparatus at P = 7 GPa and T = 1700 °C, was characterized by X-ray single-crystal diffraction and Raman spectroscopy. The compound was found to be monoclinic (R1 = 2.56 %), space group C2/c, with lattice parameters a = 9.687(2), b = 8.814(1), c = 5.290(1) Å, β = 107.853(2)°, V = 430.08(1) ų. The coexistence of Mg and Ti⁴⁺ at the M1 site does not induce strong modifications either to the M1 site or to the adjacent M2 site. The Raman spectrum of synthetic Na–Ti-pyroxene was obtained for the first time and compared with that of Mg₂Si₂O₆ (with very low concentrations of Na and Ti). The structural characterization of the Na–Ti–Mg-pyroxene is important, because the study of its thermodynamic constants provides new constraints on thermobarometry of the upper mantle assemblages.     

The Influence of Benthic Macrofauna on the Erodibility of Intertidal Sediments with Varying mud Content in Three New Zealand Estuaries

Fine sediment inputs can alter estuarine ecosystem structure and function. However, natural variations in the processes that regulate sediment transport make it difficult to predict their fate. In this study, sediments were sampled at different times (2011–2012) from 45 points across intertidal sandflat transects in three New Zealand estuaries (Whitford, Whangamata, and Kawhia) encompassing a wide range in mud (≤63 μm) content (0–56 %) and macrofaunal community structure. Using a core-based erosion measurement device (EROMES), we calculated three distinct measures of sediment erosion potential: erosion threshold (? _c ; N m^?2), erosion rate (ER; g m^?2 s^?1), and change in erosion rate with increasing bed shear stress (m _e ; g N^?1 s^?1). Collectively, these measures characterized surface (? _c and ER) and sub-surface (m _e ) erosion. Benthic macrofauna were grouped by functional traits (size and motility) and data pooled across estuaries to determine relationships between abiotic (mud content, mean grain size) and biotic (benthic macrofauna, microbial biomass) variables and erosion measures. Results indicated that small bioturbating macrofauna (predominantly freely motile species <5 mm in size) destabilized surface sediments, explaining 23 % of the variation in ? _c (p ≤ 0.01) and 59 % of the variation in ER (p ≤ 0.01). Alternatively, mud content and mean grain size cumulatively explained 61 % of the variation in m _e (p ≤ 0.01), where increasing mud and grain size stabilized sub-surface sediments. These results highlight that the importance of biotic and abiotic predictors vary with erosion stage and that functional group classifications are a useful way to determine the impact of benthic macrofauna on sediment erodibility across communities with different species composition.     

Efficient removal of Evans blue dye by Zn–Al–NO<Subscript>3</Subscript> layered double hydroxide

Evans blue (EB) dye has been successfully removed from aqueous solution through chemisorption process with synthetic layered double hydroxides (LDH) [Zn_1?x Al _x (OH)₂NO₃·nH₂O, x = 0.2–0.33]. Detailed evaluation of dye adsorption characteristics in aqueous medium has been studied for different layer charged hydroxides. The objective of the study was efficient removal of a dye by LDH and understanding the structure–property relationship of the LDH on its adsorption behaviour. Highest Langmuir monolayer adsorption capacity (Qt) of 113.64 mg g^?1 was observed for highest layer charge x = 0.33, and it is higher than previously reported values for the LDH-EB dye system. Under optimized condition, 99% of EB dye is removed from aqueous solution within 60 min at 313 K. The monotonous increase in Qt value with increasing layer charge is correlated with layer charge density (LCD) and lower particle size of the synthetic LDH. The variation in Qt among different layer charged materials is marginal (3.46–4.17%) with respect to the respective anion exchange capacity (AEC) of LDH NO₃. The limited contribution of AEC surmises the occurrence of surface-only adsorption and absence of intercalation as validated by the XRD analysis. The spontaneity of the EB dye removal increases with increasing temperature and LCD. The chemisorption nature of the adsorption reaction is well supported by the thermodynamics values.     

The thermal expansion and crystal structure of mirabilite (Na<Subscript>2</Subscript>SO<Subscript>4</Subscript>·10D<Subscript>2</Subscript>O) from 4.2 to 300 K,determined by time-of-flight neutron powder diffraction

We have collected high resolution neutron powder diffraction patterns from Na₂SO₄·10D₂O over the temperature range 4.2–300 K following rapid quenching in liquid nitrogen, and over a series of slow warming and cooling cycles. The crystal is monoclinic, space-group P2₁/c (Z = 4) with a = 11.44214(4) Å, b = 10.34276(4) Å, c = 12.75486(6) Å, β = 107.847(1)°, and V = 1436.794(8) Å³ at 4.2 K (slowly cooled), and a = 11.51472(6) Å, b = 10.36495(6) Å, c = 12.84651(7) Å, β = 107.7543(1)°, V = 1460.20(1) Å³ at 300 K. Structures were refined to R _P (Rietveld powder residual, \( R_{P} = {{\sum {\left| {I_{\text{obs}} - I_{\text{calc}} } \right|} } \mathord{\left/ {\vphantom {{\sum {\left| {I_{\text{obs}} - I_{\text{calc}} } \right|} } {\sum {I_{\text{obs}} } }}} \right. \kern-\nulldelimiterspace} {\sum {I_{\text{obs}} } }} \)) better than 2.5% at 4.2 K (quenched and slow cooled), 150 and 300 K. The sulfate disorder observed previously by Levy and Lisensky (Acta Cryst B34:3502–3510, 1978) was not present in our specimen, but we did observe changes with temperature in deuteron occupancies of the orientationally disordered water molecules coordinated to Na. The temperature dependence of the unit-cell volume from 4.2 to 300 K is well represented by a simple polynomial of the form V = ? 4.143(1) × 10^?7 T ³ + 0.00047(2) T² ? 0.027(2) T + 1437.0(1) Å³ (R ² = 99.98%). The coefficient of volume thermal expansion, α _V , is positive above 40 K, and displays a similar magnitude and temperature dependence to α _V in deuterated epsomite and meridianiite. The relationship between the magnitude and orientation of the principal axes of the thermal expansion tensor and the main structural elements are discussed; freezing in of deuteron disorder in the quenched specimen affects the thermal expansion, manifested most obviously as a change in the behaviour of the unit-cell parameter β.