Estimates of winter currents on the Israeli continental shelf

A simplified analytical model for continental shelf wind-driven currents is adopted. The calculated results compare favorably with extensive field measurements from two separate sources. The model is used to hindcast the current climatology on the Israeli continental shelf. The maximum northward/southward alongshore currents at 10-m water depth, with a return period of 100 years, are found to be 1.28 and 0.53 m/s, respectively.     

Wave-induced bottom currents on the outer shelf

Estimates of the wave-induced oscillatory bottom currents available to move sediment on the continental shelf have been made using the Pierson—Moskowitz wave spectrum; the oscillations are substantially stronger than had previously been thought. Near a shelf edge with canyons the wave-induced currents will be locally enhanced by wave refraction by about four times under certain conditions for idealized topography. Local sediment-transport rates will be greater and will occur more frequently than had previously been supposed.     

Tidal fluctuation of the surface currents of the Kuroshio in the East China Sea

Significant fluctuations of the currents of the tidal frequencies have been detected in the Kuroshio Current northeast of Taiwan and in the Tokara Strait, with total amplitudes comparable to the mean surface current (about 4050 cm s⁻¹). At the continental shelf the tidal signal varies considerably with distance from the axis of the Kuroshio. Tidal ellipses on the continental shelf consistently have major axes in the northwest-southeast direction. Because tidal signals in the Kuroshio regions have very small spatial scales, they may not be caused by the barotropic tide but the baroclinic tide. It is inferred that the Kuroshio interacts with the baroclinic tides over the continental slope.     

Waves and currents near the continental shelf edge

The abrupt depth increase which characterises the edge of many continental shelves determines a reduced horizontal length scale and a localised transition from shelf seas to the deep ocean. Particular forms of motion which may arise from the steep slopes include topographically guided currents along the slope, shelf-break upwelling, topographic Rossby waves and internal lee waves in the tidal current. The ocean/shelf mismatch may lead to a clear separation of water types, substantial reflection (from the shelf-edge neighbourhood) of all oceanic and shelf motions with periods greater than a few hours, and interaction between barotropic and baroclinic motions. Unstable longshelf currents, interleaving water masses, strong internal tides and internal waves, and narrow canyons enhance mixing across the shelf edge.     

Direct measurements of coastal currents around southern New Zealand

Results are presented from direct measurements of subsurface currents at ten coastal positions around the southern half of New Zealand, and from geomagnetic electrokinetograph measurements of surface currents between these positions. Currents on the continental shelf were predominantly tidal. Strongest mean flows were found on the continental slope adjacent to areas where the continental shelf is narrowest. The flow on the west coast of the South Island was southwards south of 44° S, with a maximum mean speed at a depth of 100 m of 0.64 m.s^‐1. On the east coast of the South Island the flow was generally towards the north, with a maximum speed at a depth of 100 m of 0.21 m.s^‐1 near latitude 42° 30’ S.     

An instrumentation system to measure near-bottom conditions on the continental shelf

In recent years significant interest has emerged regarding bottom currents and sediment dispersal over continental shelves and shallow marine waters. Although many papers have been written on sediment dispersal mechanisms, they include relatively few long-term observations of bottom currents and/or sediment transport. Lack of observational data is related to the hostile nature of the environment, and the difficulty associated with placing and retrieving instruments on the floor of the continental shelf during some seasons and environmental conditions.This paper describes an instrumentation system designed for use on the floor of the continental shelf. It can remain submerged for periods of one month continuously recording water speed and direction 1 m from the sea bed, differential pressure, and bed nature by means of half-hourly photographs. Four of these systems are presently in use in arrays across the continental shelf of Washington.     

Modelling tidal currents on the coast of Portugal

A tide circulation model of the Atlantic coast of the Iberian Peninsula has been constructed. This regional numerical model covers the whole continental shelf. The finite element computational grid is made of some 16,300 triangular elements with sizes ranging between 13 km (on the offshore boundary) and 1 km (near the coast), with local refinements on the continental shelf and in the area of Figueira da Foz. This site was selected as experimental site for the study of waves and currents in the frame of the MAST2/WAVEMOD research project.Boundary conditions along the three oceanic limits of this widely open domain are obtained from the North-Atlantic component of a World Ocean tidal numerical model known as FES94 [Le Provost, C., Genco, M.L., Lyard, F., Vincent, P. and Canceil, P. (1994) Spectroscopy of the world ocean tides from a finite element hydrodynamic model, Journal of Geophysical Research, Topex-Poseidon Special Issue]. A new radiation-like boundary condition has been introduced in the modelling system used (Telemac-2D), which solves the Shallow Water Equations (SWE), in order to interface the two models and to allow for the tidal wave to leave the northern limit without reflection. Model calibration has been performed on the dominating M₂ constituent. The introduction of the astral static potential generating the tide in the SWE improved this regional model.A long duration run (1 month) has been performed, the model being forced by the eight major tide constituents. Harmonic analysis of results has been performed on 17 tide constituents, due to non-linear interactions of constituents on the continental shelf. Comparisons with the FES94 model on one hand, and with a set of coastal tide gauges on the other hand, are good. A database of tidal harmonics is now available for forecasting sea levels and currents in this area.This work has shown that diurnal shelf trapped tide waves exist in some places along the Portuguese continental shelf, which induce diurnal dominant tidal currents in these places (North of Figueira da Foz).     

基于FVCOM的南海北部海域潮汐潮流数值模拟

基于非结构三角形网格的FVCOM(finite-volume coastal ocean model )数值模型, 对南海北部海域的潮汐、潮流进行了精细化数值模拟研究, 并根据模拟结果详细分析了M2, S2, K1, O1 分潮的潮汐和潮流特征。研究结果表明: 神泉港到甲子港海域表现为正规全日潮性质, 珠江口附近海区潮汐以不正规半日潮为主, 其他海域主要表现为不规则全日潮; 陆架海域和深水海域主要表现为往复流, 陆架坡折区存在较强的旋转流, 陆架坡折区为不规则半日潮流和不规则全日潮流的分界线; 东沙群岛附近海域以不规则全日潮流为主, 旋转方向为顺时针; 整个海域的最大流速分布与等深线基本平行, 东沙群岛附近速度明显变大, 最大值出现在台湾浅滩附近, 最大值超过70 cm/s; 南海潮波系统以巴士海峡传入的大洋潮波为主, 分为三支潮流, 以不同的形式进出南海北部海域; 余流在台湾浅滩附近达到最大, 超过6 cm/s, 自南向北进入台湾海峡, 近岸余流自东向西沿岸流动。本研究在东沙群岛周边的模拟结果与前人基于实测资料的分析吻合较好, 并且由于采用了高精度的三角网格, 本文对东沙群岛周边海域的潮汐潮流结构和性质的刻画和分析是迄今为止较为精细的, 同时本研究还提高了对沿岸验潮站调和常数的模拟精度。     

Tidally incised valleys on tropical carbonate shelves: An example from the northern Great Barrier Reef, Australia

The formation of incised valleys on continental shelves is generally attributed to fluvial erosion under low sea level conditions. However, there are exceptions. A multibeam sonar survey at the northern end of Australia's Great Barrier Reef, adjacent to the southern edge of the Gulf of Papua, mapped a shelf valley system up to 220 m deep that extends for more than 90 km across the continental shelf. This is the deepest shelf valley yet found in the Great Barrier Reef and is well below the maximum depth of fluvial incision that could have occurred under a − 120 m, eustatic sea level low-stand, as what occurred on this margin during the last ice age. These valleys appear to have formed by a combination of reef growth and tidal current scour, probably in relation to a sea level at around 30–50 m below its present position.

Tidally incised depressions in the valley floor exhibit closed bathymetric contours at both ends. Valley floor sediments are mainly calcareous muddy, gravelly sand on the middle shelf, giving way to well-sorted, gravely sand containing a large relict fraction on the outer shelf. The valley extends between broad platform reefs and framework coral growth, which accumulated through the late Quaternary, coincides with tidal current scour to produce steep-sided (locally vertical) valley walls. The deepest segments of the valley were probably the sites of lakes during the last ice age, when Torres Strait formed an emergent land-bridge between Australia and Papua New Guinea. Numerical modeling predicts that the strongest tidal currents occur over the deepest, outer-shelf segment of the valley when sea level is about 40–50 m below its present position. These results are consistent with a Pleistocene age and relict origin of the valley.

Based on these observations, we propose a new conceptual model for the formation of tidally incised shelf valleys. Tidal erosion on meso- to macro-tidal, rimmed carbonate shelves is enhanced during sea level rise and fall when a tidal, hydraulic pressure gradient is established between the shelf-lagoon and the adjacent ocean basin. Tidal flows attain a maximum, and channel incision is greatest, when a large hydraulic pressure gradient coincides with small channel cross sections. Our tidal-incision model may explain the observation of other workers, that sediment is exported from the Great Barrier Reef shelf to the adjacent ocean basins during intermediate (rather than last glacial maximum) low-stand, sea level positions. The model may apply to other rimmed shelves, both modern and ancient.     

M2 tidal currents near the continental shelf margin in the East China Sea

Time series of velocity and water temperature were measured at three stations on the continental shelf, on the shelf margin and on the slope off the northwest Tokunoshima in December 1980 to study influences of the slope on tides.Tidal currents with semidiurnal periods were dominant at the stations on the shelf and shelf margin. However, semidiurnal components in temperature fluctuations were dominant at the stations on the shelf margin and the slope. We estimated horizontal currents due to semidiurnal internal tides from the vertical distribution of water density and temperature, assuming that the temperature fluctuations were caused by the vertical displacement of water particles due to semidiurnal internal tides. The tidal ellipses at the station on the shelf and the phase relation of the tidal currents between the two stations on the shelf and shelf margin indicated that the M₂ surface tide on the shelf was a Sverdrup wave propagating to the northwest.Semidiurnal tidal currents on the slope were also caused by tides of surface and internal modes. Furthermore, the axis of the tidal ellipse was not perpendicular to the co-tidal line estimated by Ogura (1934) but rather parallel to the isobaths on the slope, which shows a striking effect of the bottom topography on the tidal currents.     

Morphology and sedimentary processes in and around Tortugas and Agassiz Sea Valleys,southern Straits of Florida

Continuous seismic reflection profiling and new bathymetry data in the southern Straits of Florida over an area dominated by the Tortugas and Agassiz Valley systems have allowed a more detailed analysis of the morphology and sedimentary processes active in this region. Four dives in the submersible DSV “Alvin” supplement the seismic and bathymetric data.The continental slope in the study area can be divided into two physiographic provinces: (I) an irregular topography controlled by the Florida Escarpment west of Tortugas Valley; and (II) the remainder of the continental slope which contains the majority of features under investigation. Seismic data indicate that the valleys are being filled shoreward of 290 fathoms (530 m) by a wedge of prograding sediments derived from the Florida shelf.The morphology of the two valley systems reflects probable differences of origin. Tortugas Valley appears to have originated coincident with the eastern terminus of the Florida Escarpment and province-I-type topography. The Agassiz valleys may have an origin associated with jointing patterns observed by divers aboard DSV “Alvin”. Current meter readings and bottom photographs from “Alvin” indicate that currents are relatively sluggish and not very effective in the transport of sediment within the valleys. An area of undulations west of Pourtales Terrace was investigated and concluded to be erosional in origin.Slumping appears to have played a large part in shaping many features in the study area. The bottom morphology and sediment distribution on the continental slope and in the axis of the Straits of Florida suggest that bottom currents are active in shaping the entire area.     

A numerical experiment on the variations of western boundary currents: Part II. Response to a moving typhoon

Response of the barotropic western boundary current to typhoon passage is investigated by the use of the numerical models described in Part I. Steady states obtained in Part I are chosen as the initial conditions for undisturbed currents. In these models it is assumed that an axially symmetric typhoon (radius = 100 km, maximum wind speed = 27.4 m/sec) moves parallel to the western boundary.For the model with a flat bottom the boundary flow diminishes its strength and broadens its width after the passage of the typhoon offshore. For the model with a continental slope the effect of the typhoon is significantly different depending on the distance of the path of the typhoon from the western boundary. Specifically the north wind on the continental slope causes the formation of cyclonic vortex, which progresses southwards along the slope in the northern hemisphere. Linear theory of continental shelf waves indicates that the phase speed of the propagation of the vortex is 2.4 m/sec. Anomalies of the water level along the coast are also calculated from geostrophic relationships.     

Effects of longshore shelf variations on barotropic continental shelf waves,slope currents and ocean modes

Effects of continental shelf bends, converging depth contours and changing depth profiles are discussed. Some analysis is carried out for previously unstudied cases. Separate oceanic interior and shelf flow problems are formulated for a sufficiently narrow shelf. The ocean interior ‘sees’ only an integrated shelf effect, typically increasing shelf-edge amplitudes, retarding longshore Kelvin-wave propagation and increasing natural mode periods by 0 (10%). On the local shelf, the flow matches to the ocean interior and is nondivergent. Effects on shelf waves and slope currents depend subtly on the nature of the longshore variations. Curvature and contour convergence do not per se imply scaterring or generation of shelf waves. Indeed, any depth h(ξ) where ▽² ξ(x,y) = 0 (a condition approximating longshelf uniformity in the topography's convexity) supports essentially the same shelf waves as do straight depth contours (DAVIS, 1983), and slope currents follow depth contours. Scattering results rather from breaks in analyticity of the depth profile. Hence calculations for small isolated features (necessarily highly convex or concave) may overestimate scattering, and superposition for realistic topography may lead to much self-cancellation among scattered waves. Otherwise, examples show a strong preference for scattering into adjacent mode numbers and into any shelf wave mode near to its maximum frequency. A shelf sector, where the maximum shelf wave frequency maxω is less than the frequency ω of an incident shelf wave, causes substantial scattering unless maxω and ω are very close. Adjustment of slope currents to changed conditions takes place through (and over the decay distance of) scattered shelf waves.     

Observations on geomorphology,transportation and distribution of sediments in western Lebanon and its continental shelf and slope regions

The geomorphology, drainage systems and predominant lithologies of western Lebanon are briefly described as a background for sediment transportation into the eastern Mediterranean. Fragmentary past and current bathymetric work over offshore Lebanon is reviewed and a simplified compilation bathymetric map correlating and interpreting the different survey results is presented. It reveals a narrow continental shelf about 3 km in width with two wider areas in the north and south; the shelf break occurs generally at about 100 m depth. Submarine valleys are common, most of which are seaward continuations of important land valleys but some prolong land-fault trends. Many continue down the continental slope, dividing into “distributaries”. Hydrological data indicate that over 2,525 × 10⁶ m³ of surface-water runoff annually discharges into the sea through the perennial streams of western Lebanon. A high proportion of the country exposes carbonate rocks but a number of the stream basins drain appreciable areas of soft clastics; preliminary work suggests that these contribute appreciable loads into the Mediterranean. Overall marine net sediment transport is northwards by the longshore current and predominant WSW-ENE directed waves, but investigations in progress indicate that the submarine valleys provide avenues for cross-shelf and down-slope movement for much sediment.     

Celtic and Armorican slope and shelf residual currents

Current meter data collected over the last 20 years are presented and used to describe the residual currents on the Celtic and Armorican slope and shelf regions. On the slopes, a poleward current of about 6cm s⁻¹ exists at the 500m depth contour. At mid depths, these currents are directed onslope, whereas near the bottom the flow in markedly downslope, reaching mean speeds of about 15cm s⁻¹ near 6°40′W. The downslope currents are thought to be largely tidally induced and balanced by Stokes transports. The total slope transport near 48°N is about 4Sv. On the upper slopes (<1000m depth) the transport increases poleward. On the outer Celtic shelf, a weak (2 cm s⁻¹) counter-current flowing southeastwards was observed. On the Armorican shelf, the residual flow is again nothwestwards and this coastal flow appears to continue northwards across the mouth of the English Chanel and past the Isles of Scilly with typical mean upper layer speeds of about 2cm s⁻¹. Southwest of Ireland the flow is again northwesterly. Numerical model simulations show that the eastern slope boundary current of the NE Atlantic can be driven by realistic distributions of seawater density. The simulations also show only a small wind driven barotropic response on the Celtic and Armorican shelf region and that a component of the residual shelf flows, like the slope current, may be driven by pressure distributions arising from regional differences in the distribution of seawater density, or from non local wind stress.     

Near-surface seismic facies at the Korea Strait shelf margin and trough region

High-resolution seismic profiles across the shelf margin and trough region of the Korea Strait reveal five shallow, near-surface facies units. These are relict coastal deposits, relict delta deposits, slumps and slides, and trough lag deposits. Most deposits represent a lowstand systems tract, formed during the last lowstand of sea level. Relict coastal deposits represent a linear sediment body along the present shelf margin at water depths of 120–150 m, whereas relict delta deposits occur on the gentle, southwestern slope of the trough at water depths of about 150–200 m. Slumps and slides are dominant at the base of slope in the central trough region. Sediments on the central trough floor were partly eroded and redistributed by strong currents, resulting in lag deposits.     

东海南部海域夏秋季沿岸流特征

Current characteristics and vertical variations during summer and autumn in the southern East China Sea were investigated by measuring current profile, tide, wind, and wave data for 90 d from July 28 to October 25, 2015. Our results are:(1) The current was mainly a(clockwise) rotating flow, displaying reciprocating flow characteristics,and vertically the current directions were the same throughout the vertical profile.(2) The horizontal current speed was strongest during August(summer) with an average speed of 51.8 cm/s. The average current speeds during spring tides were highest in August and weakest in September, with speeds of 59.9 and 42.8 cm/s,respectively.(3) Considerable differences exist in average current speeds in different layers and seasons. The highest average current speeds were found in the middle–upper layers in August and in the middle–lower layers in September and October.(4) The residual current speed was highest in August, when the speed was 12.5–47.1 cm/s,whereas the vertical average current speed was 34.3 cm/s. The depth-averaged residual current speeds in September and October were only 50% of that in August, and the residual current direction gradually rotated in a counter-clockwise direction from the lower to surface layers.(5) Typhoon waves had a significant influence on the currents, and even affected the middle and lower water layers at depths of >70.0 m. Our results showed that the currents are controlled by the dynamic interplay of the Taiwan Warm Current, incursion of the Kuroshio Current onto the continental shelf, and monsoonal changes.     

南海北部沙波区海底强流的内波特征及其对沙波运动的影响

2008年3月6日至2008年4月9日, 在南海北部外陆架与陆坡上的沙波区进行了海底流速的连续观测,观测结果表明潮流与海流较弱,但时有流速达30—77cm.s-1的海底强流发生。强流方向与南海北部内波传播方向相对应,多分布在偏NW向与偏SE向。偏SE向流强于偏NW向流,与内波在传播方向上的下坡流大于上坡流的特征一致。对流速序列进行了旋转功率谱分析,结果表明,高于M2分潮的频率中,众多的振荡分量具有内波流性质,说明阵发性强流为内波所致。采用观测流速计算了沙波的移动速度,计算结果得出强流能起动海底泥沙,由于NW向传播（上坡方向）的内波导致了SE向（下坡方向）的净流动,沙波偏SE向移动,但沙波移动速度不大,小型沙波移动速度小于1.6m.a-1。采用潮流、风暴潮耦合模型计算了强台风驱动的海底流速过程,表明潮流、风暴潮耦合也能移动海底沙波,但沙波移动方向与台风路径相关,不一定为SE向,且移动距离更小,潮流、风暴潮耦合不是沙波移动的主要动力机制。     

Morphosedimentary features and recent depositional architectural model of the Cantabrian continental margin

Multibeam bathymetry, high (sleeve airguns) and very high resolution (parametric system-TOPAS-) seismic records were used to define the morphosedimentary features and investigate the depositional architecture of the Cantabrian continental margin. The outer shelf (down to 180–245 m water depth) displays an intensively eroded seafloor surface that truncates consolidated ancient folded and fractured deposits. Recent deposits are only locally present as lowstand shelf-margin deposits and a transparent drape with bedforms. The continental slope is affected by sedimentary processes that have combined to create the morphosedimentary features seen today. The upper (down to 2000 m water depth) and lower (down to 3700–4600 m water depth) slopes are mostly subject to different types of slope failures, such as slides, mass-transport deposits (a mix of slumping and mass-flows), and turbidity currents. The upper slope is also subject to the action of bottom currents (the Mediterranean Water — MW) that interact with the Le Danois Bank favouring the reworking of the sediment and the sculpting of a contourite system. The continental rise is a bypass region of debris flows and turbidity currents where a complex channel-lobe transition zone (CLTZ) of the Cap Ferret Fan develops.The recent architecture depositional model is complex and results from the remaining structural template and the great variability of interconnected sedimentary systems and processes. This margin can be considered as starved due to the great sediment evacuation over a relatively steep entire depositional profile. Sediment is eroded mostly from the Cantabrian and also the Pyrenees mountains (source) and transported by small stream/river mountains to the sea. It bypasses the continental shelf and when sediment arrives at the slope it is transported through a major submarine drainage system (large submarine valleys and mass-movement processes) down to the continental rise and adjacent Biscay Abyssal Plain (sink). Factors controlling this architecture are tectonism and sediment source/dispersal, which are closely interrelated, whereas sea-level changes and oceanography have played a minor role (on a long-term scale).     

Structure and morphology of the west Reykjanes basin and the southeast Greenland continental margin

The continental-shelf morphology is dominated by glacial erosion and deposition. Erosion is prominent on the near-shore shelf and deposition along the outer shelf edge. The continental slope is characterized by delta-shaped progradations (glaciomarine-sediment fans) seaward of the shelf channels. Canyons cross the continental slope only in the region southeast of Cape Farewell. The continental rise is incised by a number of submarine canyons. Broad sediment ridges on the upper continental rise are probably canyon-eroded remains of extensive Plio-Pleistocene fans. A mid-ocean channel which crosses the continental rise is possibly related to the axis of maximum depth of Denmark Strait. Despite the presence of strong bottom currents, there is no indication of depositional sediment drifts along the continental margin of Greenland between Cape Farewell and Denmark Strait. This may be a function of high current velocity or low sediment load.Sea floor older than 60 m.y. B.P. is present just seaward of the Greenland continental margin implying either downwarped continental material or an early rift formed prior to the separation of Greenland from the European plate. A left lateral offset of anomalies 20 and 21 at 65°N indicates a major fracture zone related to the Greenland continental margin offset nearby.