适于弹性波方程无网格有限差分数值解的PML与CFS-PML吸收边界条件（英文）

无网格有限差分法能有效提高数值模拟的几何灵活性,且无需网格映射或复杂的网格生成过程。RBF-FD (基于径向基函数的有限差分)是最常用的无网格有限差分法之一,可以准确模拟地震波在非矩形计算域中的传播。本文提出适于弹性波方程无网格有限差分数值解的PML (完全匹配层)吸收边界条件,可以应用于非矩形速度模型的边界。但是PML吸收边界对近掠射波、低频波的吸收效果不好。为此,我们继续提出适于弹性波方程无网格有限差分数值解的CFS-PML(复频移完全匹配层)吸收边界条件。本文所提两种边界条件均是通过构造辅助微分方程,得到不分裂时域表达式,具有存储量小、便于编程实现的特点。模拟结果表明,两种PML吸收边界条件都能有效地消除无网格有限差分数值模拟的人工边界反射。此外,本文所提CFS-PML相较PML对近掠射波和损耗波的吸收效果更好。     

弹性波正演模拟中改进的非分裂式PML实现方法(英文)

在弹性波有限差分正演模拟中,吸收边界条件常用来吸收截断边界处引入的不期望边界反射,其中完全匹配层(PML)吸收边界条件被认为是目前最理想的吸收边界条件。但是PML吸收边界条件的传统实现却存在着很大不足:全局分裂式PML吸收边界条件实现简单但是需要占用太多内存;局部分裂式PML吸收边界条件需要考虑多个边界和角点区域,编程实现非常复杂;非分裂式PML吸收边界条件由于涉及卷积运算,计算量很大。本文基于非分裂式PML吸收边界条件,结合复频移伸展函数,提出了一种新的数值实现方法,其计算方程简单、占用内存小、编程实现容易,是对PML介质理论数值实现的改进和完善。     

地震波模拟中多轴复频移近似完全匹配层的吸收效果及稳定性

在进行地震波模拟计算的过程中用有限的计算区域模拟地下无限空间,需要进行边界截断.为了在边界处不产生虚假反射影响模拟结果,需要引入吸收边界条件.本文采用的近似完全匹配层是一种新型非分裂完全匹配层,计算效率较高.同时相比于其他非分裂完全匹配层,其还具有不改变方程的形式、易于实现等优势.但是当入射波角度较大,边界吸收效果变弱,且残留在边界中的能量使近似完全匹配层变得极其不稳定.多轴复频移近似完全匹配层的提出就是为了改善对大角度入射波的吸收并且提高边界的稳定性.通过实验模拟和矩阵特征值灵敏度来研究多轴复频移近似完全匹配层的吸收效果及稳定性.结果表明该方法不仅能够吸收掠入波,而且对常规入射波的吸收也得到提升,同时拥有更好的稳定性.     

CPML条件下黏弹介质地震波传播的有限差分模拟与特征分析

在波动方程有限差分波场数值模拟中,为了使计算得到的边界波场值更接近于真实的边界波场值,需要使用边界条件以减少来自计算区域边界的人为反射能量。传统的分裂式完全匹配层(SPML)吸收边界条件不能有效吸收掠射波,后来发展的不分裂卷积完全匹配层(CPML)能够较好地处理这个问题,并且CPML在处理边界问题时无需对波场进行非物理分裂。本文针对Kelvin-Voigt模型的黏弹性介质,采用高阶交错网格有限差分方法进行数值模拟,同时利用CPML吸收边界条件进行边界处理。数值模拟结果表明:与弹性波相比,大角度入射产生的低频掠射波对黏弹性波的影响更大;CPML吸收边界条件对低频掠射波的吸收效果比传统的SPML吸收边界条件更好。     

二阶声波方程非分裂式CPML实施新方法

完全匹配层(PML)是处理波动方程数值模拟中模型边界反射问题的常用方法,在时间域有限差分(FD)波场数值模拟中得到了广泛的应用.早期的PML技术存在对于近切入射和低频反射吸收效果较差的问题,由此产生了复频移PML(CFS-PML)模型边界反射压制法,其中基于递归卷积技术的复频移PML(CPML),由于其算法在时间域的高效性,被广泛应用于时间域一阶方程的数值模拟.一阶波动方程CPML边界条件是非常成熟的方法,但是二阶方程, CPML方法还需要进一步发展研究.目前,二阶方程的CPML处理方法需要引入辅助方程或者辅助变量,导致计算量增加,从而对数值模拟效率产生一定的影响.本文提出了一种分区域两步法CPML实施策略,简称为TS-CPML. TS-CPML通过对二阶CPML控制方程进行两步有限差分进行数值模拟,从而避免计算引入辅助变量的新二阶偏微分方程或其他辅助方程,具有计算效率高、编程易于实现等特点.我们将该方法应用于二阶声波方程和TTI介质二阶拟声波方程组,数值模拟显示,在相同参数下,由模型边界产生的反射波振幅约为传统二阶方程CPML方法的50%以上,验证了TSCMPL技术的优越性.     

不分裂卷积完全匹配层与旋转交错网格有限差分在孔隙弹性介质模拟中的应用

完全匹配层吸收边界在地震波模拟中已广泛使用,但常用的场分裂格式完全匹配层吸收边界(SPML)和传统的不分裂完全匹配层吸收边界(NPML)对极低频入射波或大角度入射波的边界吸收效果不好.一种无需分裂和显式卷积计算的完全匹配层吸收边界(CPML)不仅能够解决常规PML吸收边界的不足,而且具有存储量小、计算效率高、易于编程实现的特点.本文将这种完全匹配层(CPML)吸收边界引入到孔隙弹性介质速度-应力格式的旋转交错网格有限差分算法中,对完全匹配层吸收边界参数进行数值分析,得到一组优化的参数.孔隙弹性介质数值模拟结果表明这种不分裂卷积完全匹配层的吸收效果优于常规完全匹配层.     

基于混合有限元格式的完美匹配层与多次透射公式人工边界比较研究

介绍了完美匹配层(PML)人工边界可以吸收不同频率和任意角度入射波的原理以及PML人工边界的构造方法. 在此基础上，将PML人工边界应用于地震波动数值模拟的速度应力混合有限元格式中，探讨了PML应用的可行性，并通过数值试验研究了PML人工边界的反射率，比较了PML人工边界与多次透射公式(MTF)人工边界应用于体波和面波模拟中数值反射的差异，对两种边界的透射效果进行了分析. 结果表明， 尽管数值离散后PML人工边界不再保持完美匹配特性，但PML人工边界在近场波动数值模拟中可获得比MTF人工边界更为理想的吸收效果，在角点透射、大角度掠射情形下尤为明显；PML人工边界在混合有限元格式的数值算法中，未见失稳等不良反应，比MTF人工边界有更好的稳定性；在合理选择参数的情况下，PML人工边界的运算量可接受.      

地震波数值模拟的非规则网格PML吸收边界

以格子法为基础,以声波方程为例研究非规则网格PML(Perfectly Matched Layer)方法.本方法的核心是建立局部坐标系下的分裂方程和基于积分近似的微分方程弱形式.该非规则网格模拟方法允许在计算域内设置任意形状的人工边界.对于二维半空间问题,与采用矩形人工边界相比,采用半圆形人工边界可减少计算量20%以上.采用光滑的曲边界,不仅可减少计算区域,还可避免常规的PML吸收边界在吸收带角点区域的特殊处理.本方法事先计算和存储边界单元的局部几何参数,在计算的每一时间步查表调用这些参数,与常规的直边界PML方法相比,不增加任何计算量.     

起伏地表弹性波传播的间断Galerkin有限元数值模拟方法

间断Galerkin有限元法（DG-FEM）作为一种有效的高阶有限元法受到了国内外学者的广泛关注.本文基于任意高阶间断Galerkin有限元法对弹性波方程进行空间离散,并将离散后所得的非齐次线性常微分方程系统齐次化,最后结合针对齐次问题的强稳定性保持龙格库塔（SSP Runge-Kutta）算法,将DG-FEM推广至时间任意高阶精度.另外,借鉴近最佳匹配层（NPML）的思想,基于复频移（CFS）拉伸坐标变换推导了一种新的PML吸收边界条件（简称为CFS-NPML）,该CFS-NPML能够与DG-FEM算法很好地结合,形成有效的起伏地表地震波传播数值模拟技术.数值试验结果表明,DG-FEM具有高阶精度,可以适应任意复杂起伏地表和复杂构造情况下的弹性波传播数值模拟.同时,CFS-NPML对包括面波等震相的人为边界反射都具有良好的吸收效果.     

常Q衰减介质分数阶波动方程优化有限差分模拟

本文基于Kjartansson常Q模型理论,推导了常Q衰减介质中黏声波和黏弹性波的速度-应力方程,并采用基于二项式窗函数的优化交错网格有限差分方法进行了数值模拟,同时引入不分裂的复频移卷积完全匹配层(CPML)吸收边界条件,以消除边界反射.使用基于自适应时间步长记忆方法的中心差分近似时间分数阶导数,与常用的短时记忆方法相比,提高了波动方程的离散化精度和计算效率.通过对比均匀模型下声波的数值解与解析解,验证了算法的精确性,并进一步分析了不同品质因子下地震波的频散及衰减特征.对BP盐丘模型的数值模拟结果可以较好地反映本文数值方法对复杂介质的适应性及频散压制效果.      

An unsplit complex frequency-shifted perfectly matched layer for second-order acoustic wave equations

The perfectly matched layer(PML) boundary condition has been proven to be effective for attenuating reflections from model boundaries during wavefield simulation. As such, it has been widely used in time-domain finite-difference wavefield simulations. The conventional PML has poor performance for near grazing incident waves and low-frequency reflections. To overcome these limitations, a more complex frequency-shifted stretch(CSF) function is introduced, which is known as the CFSPML boundary condition and can be implemented in the time domain by a recursive convolution technique(CPML). When implementing the PML technique to second-order wave equations, all the existing methods involve adding auxiliary terms and rewriting the wave equations into new second-order partial differential equations that can be simulated by the finite-difference scheme, which may affect the efficiency of numerical simulation. In this paper, we propose a relatively simple and efficient approach to implement CPML for the second-order equation system, which solves the original wave equations numerically in the stretched coordinate. The spatial derivatives in the stretched coordinate are computed by adding a correction term to the regular derivatives. Once the first-order spatial derivatives are computed, we computed the second-order spatial derivatives in a similar way; therefore, we refer to the method as two-step CPML(TS-CPML). We apply the method to the second-order acoustic wave equation and a coupled second-order pseudo-acoustic TTI wave equation. Our simulations indicate that amplitudes of reflected waves are only about half of those computed with the traditional CPML method, suggesting that the proposed approach has computational advantages and therefore can be widely used for forwarding modeling and seismic imaging.     

探地雷达FDTD数值模拟中不分裂卷积完全匹配层对倏逝波的吸收效果研究

介绍了CPML边界条件的原理,推导了CPML的GPR正演FDTD差分公式,对比分析了Berenger PML、UPML、CPML三种PML对倏逝波的吸收性能.开展了PML边界中关键参数κ和α的选取实验,确定了参数的取值范围与选取原则.然后,以二维TM波为例,研究了倏逝波产生的机理,分析了决定逝波性吸收性能的影响因素.均匀介质的波场快照、检测点的反射误差及全局反射误差对比,说明了3种边界条件对传输波都具有较好的吸收能力,而对低频倏逝波的吸收表现迥异,其中CPML因为引入了参数α,对倏逝波的吸收效果最佳,但离散化造成的全域误差也最大.最后,应用加载UPML和CPML边界条件的FDTD程序,开展了GPR二维剖面法、宽角法矩状地电模型及三维复杂模型的正演,展示了倏逝波反射对雷达正演剖面及波场快照的影响.进一步对比了UPML与CPML对倏逝波的吸收表现优劣,结果显示,CPML可有效减少边界反射误差,并能取得满意的精度,综合考虑对倏逝波的吸收、全域误差、编程难易程度等因素,在GPR正演中推荐使用CPML.     

衰减夹层GPR模拟的时频域全局反射误差

全局反射误差分析是深入研究探地雷达(GPR)吸收边界条件吸收效率的有力工具.基于常规完全匹配层(PML)的标准交错网格有限差分算法必须满足严格的CFL条件限制,即在单位时间步长内,不容许电磁波传播的距离超过单元网格尺寸.为了提高主区域所有网格节点的计算效率,并有效地吸收传播后期出现的低频隐失波,提出基于非分裂递归卷积完全匹配层(UCPML)的旋转交错网格(RSG)GPR正演算法.该算法采用不同的网格交错策略,并在边界条件中引入了吸收低频隐失波的自由可变因子,使得该算法允许选取较大的时间步长,提高了计算效率,并且实现了对低频隐失波的高效吸收.本文首先给出了RSG差分格式,推导了基于UCPML的RSG差分更新方程,探讨了数值色散的稳定性条件,然后以绕射现象严重的衰减夹层数值模拟为例,分别从波场快照、单道波记录、时间域反射误差(TDRE)、频率域反射误差(FDRE)四个方面分析了UCPML与常规PML的全局反射误差,说明了基于UCPML和RSG的GPR正演算法能更有效地吸收低频隐失波.     

Stability of finite difference numerical simulations of acoustic logging-while-drilling with different perfectly matched layer schemes

In acoustic logging-while-drilling （ALWD） finite difference in time domain （FDTD） simulations, large drill collar occupies, most of the fluid-filled borehole and divides the borehole fluid into two thin fluid columns （radius -27 mm）. Fine grids and large computational models are required to model the thin fluid region between the tool and the formation. As a result, small time step and more iterations are needed, which increases the cumulative numerical error. Furthermore, due to high impedance contrast between the drill collar and fluid in the borehole （the difference is 〉30 times）, the stability and efficiency of the perfectly matched layer （PML） scheme is critical to simulate complicated wave modes accurately. In this paper, we compared four different PML implementations in a staggered grid finite difference in time domain （FDTD） in the ALWD simulation, including field-splitting PML （SPML）, multiaxial PML（M- PML）, non-splitting PML （NPML）, and complex frequency-shifted PML （CFS-PML）. The comparison indicated that NPML and CFS-PML can absorb the guided wave reflection from the computational boundaries more efficiently than SPML and M-PML. For large simulation time, SPML, M-PML, and NPML are numerically unstable. However, the stability of M-PML can be improved further to some extent. Based on the analysis, we proposed that the CFS-PML method is used in FDTD to eliminate the numerical instability and to improve the efficiency of absorption in the PML layers for LWD modeling. The optimal values of CFS-PML parameters in the LWD simulation were investigated based on thousands of 3D simulations. For typical LWD cases, the best maximum value of the quadratic damping profile was obtained using one do. The optimal parameter space for the maximum value of the linear frequency-shifted factor （a0） and the scaling factor （β0） depended on the thickness of the PML layer. For typical formations, if the PML thickness is 10 grid points, the global error can be reduced to 〈1% using the optimal PML parameters, and the error will decrease as the PML thickness increases.     

Complex frequency-shifted multi-axial perfectly matched layer for frequency-domain seismic wavefield simulation in anisotropic media

Seismic anisotropy has an important influence on seismic data processing and interpretation. Although the frequency-domain seismic wavefield simulation has a problem of solving the large scale linear sparse matrix due to the computational limitations, it has some advantages over the time-domain seismic wavefield simulation including efficient inversion using only a limited number of frequency components and easy implementation of multiple sources. To accurately simulate seismic wave propagation in the frequency domain, we also need to choose the absorbing boundary conditions to absorb artificial reflections from edges of the model as we do in the time domain. Compared with the classical boundary conditions including the perfectly matched layer and complex frequency-shifted perfectly matched layer, the complex frequency-shifted multi-axial perfectly matched layer has been proven to effectively suppress the unwanted reflections at grazing incidence and solve the instability problem in the time-domain seismic numerical modelling in anisotropic elastic media. In this paper, we propose to extend the complex frequency-shifted multi-axial perfectly matched layer absorbing boundary condition to the frequency-domain seismic wavefield simulation in anisotropic elastic media. To test the validity of our proposed algorithm, we compare the results (snapshots and seismograms) of the frequency-domain seismic wavefield simulation with those of the time-domain modelling. The model studies indicate that the complex frequency-shifted multi-axial perfectly matched layer absorbing boundary condition is stable in the frequency-domain seismic wavefield simulation in anisotropic media, and provides better absorbing performance than the complex frequency-shifted perfectly matched layer boundary condition.     

完全匹配层吸收边界在孔隙介质弹性波模拟中的应用

模拟弹性波在孔隙介质中传播，需要稳定有效的吸收边界来消除或尽可能的减小由人工边界引起的虚假反射. 本文在前人工作基础上，首次建立了弹性孔隙介质情况下完全匹配层吸收边界的高阶速度-应力交错网格有限差分算法，并详细讨论了完全匹配层的构建及其有限差分算法实现. 首先，本文通过均匀孔隙模型的数值解与解析解的对比，验证所提出的数值方法的正确性；然后，本文考察了完全匹配层对不同入射角度入射波和自由表面上的瑞利波的吸收性能，将完全匹配层与廖氏和阻尼吸收边界进行了对比，研究了这三种吸收边界在不同吸收厚度情况下对弹性波吸收能力. 数值结果表明，在孔隙介质中，完全匹配层作为吸收边界能十分有效地吸收衰减外行波，无论对体波还是面波，是一种高效边界吸收算法.     

几种自由边界实施方法在完全 匹配层条件下的对比研究

传统的完全匹配层技术是一种能够较为有效地消除边界反射的边界条件,但是当表层为泊松比较高的自由表面时,该技术可能会产生不稳定的现象.针对传统的完全匹配层技术固有的不稳定和掠射情况下吸收效果不佳等缺陷,发展了多轴完全匹配层、卷积完全匹配层以及将两者结合的多轴卷积完全匹配层等3种边界条件.本文介绍了水平自由表面的不同处理方法以及传统、多轴、卷积和多轴卷积等4种完全匹配层条件的原理,通过二维半无限空间模型的交错网格有限差分正演模拟对比,分析了几种自由边界实施方法在这几种完全匹配层条件下的稳定性,并通过提取单道波形与解析解进行对比,定性分析了水平自由表面几种不同处理方法的准确性以及各自的适用条件. 结果表明,泊松比和水平自由表面实施方法对波场模拟效果及其稳定性有重要影响.      

Perfectly matched layer-absorbing boundary condition for finite-element time-domain modeling of elastic wave equations

The perfectly matched layer (PML) is a highly efficient absorbing boundary condition used for the numerical modeling of seismic wave equation. The article focuses on the application of this technique to finite-element time-domain numerical modeling of elastic wave equation. However, the finite-element time-domain scheme is based on the second-order wave equation in displacement formulation. Thus, the first-order PML in velocity-stress formulation cannot be directly applied to this scheme. In this article, we derive the finite-element matrix equations of second-order PML in displacement formulation, and accomplish the implementation of PML in finite-element time-domain modeling of elastic wave equation. The PML has an approximate zero reflection coefficients for bulk and surface waves in the finite-element modeling of P-SV and SH wave propagation in the 2D homogeneous elastic media. The numerical experiments using a two-layer model with irregular topography validate the efficiency of PML in the modeling of seismic wave propagation in geological models with complex structures and heterogeneous media.