Crustal and upper-mantle structure in the Eastern Mediterranean from the analysis of surface wave dispersion curves

The dispersive properties of surface waves are used to infer earth structure in the Eastern Mediterranean region. Using group velocity maps for Rayleigh and Love waves from 7 to 100 s, we invert for the best 1-D crust and upper-mantle structure at a regular series of points. Assembling the results produces a 3-D lithospheric model, along with corresponding maps of sediment and crustal thickness. A comparison of our results to other studies finds the uncertainties of the Moho estimates to be about 5 km. We find thick sediments beneath most of the Eastern Mediterranean basin, in the Hellenic subduction zone and the Cyprus arc. The Ionian Sea is more characteristic of oceanic crust than the rest of the Eastern Mediterranean region as demonstrated, in particular, by the crustal thickness. We also find significant crustal thinning in the Aegean Sea portion of the backarc, particularly towards the south. Notably slower S -wave velocities are found in the upper mantle, especially in the northern Red Sea and Dead Sea Rift, central Turkey, and along the subduction zone. The low velocities in the upper mantle that span from North Africa to Crete, in the Libyan Sea, might be an indication of serpentinized mantle from the subducting African lithosphere. We also find evidence of a strong reverse correlation between sediment and crustal thickness which, while previously demonstrated for extensional regions, also seems applicable for this convergence zone.     

Anelasticity of the Crust and Upper Mantle of South America From the Inversion of Observed Surface Wave Attenuation

Fundamental-mode Rayleigh and Love waves generated by several earthquakes situated along great-circle paths between pairs of seismograph stations have been analysed to obtain coefficients of attenuation, group velocities, phase velocities, and specific quality factors in the period range 18–80s in two regions of the South American continent. One set of paths crosses the shield region which lies on the eastern coast and another set traverses the mountainous region inland. the average attenuation coefficient values are clearly higher in the tectonically active western region throughout the entire period range than in the eastern or shield region.
Inversion of the attenuation data yielded shear wave internal friction ( Q ^-1_β) models as a function of depth in the crust and upper mantle in both regions. A low- Q zone below the lithosphere is prominent in both regions. the results show that substantial variations of Q _β occur in the two regions of South America. the Q_β values were found to be inversely related to the heat flow values or to the temperature.     

Transitional continental–oceanic structure beneath the Norwegian Sea from inversion of surface wave group velocity data

We have analysed the fundamental mode of Love and Rayleigh waves generated by 12 earthquakes located in the mid-Atlantic ridge and Jan Mayen fracture zone. Using the multiple filter analysis technique, we isolated the Rayleigh and Love wave group velocities for periods between 10 and 50  s. The surface wave propagation paths were divided into five groups, and average group velocities calculated for each group. The average group velocities were inverted and produced shear wave velocity models that correspond to a quasi-continental oceanic structure in the Greenland–Norwegian Sea region. Although resolution is poor at shallow depth, we obtained crustal thickness values of about 18  km in the Norwegian Sea area and 9  km in the region between Svalbard and Iceland. The abnormally thick crust in the Norwegian Sea area is ascribed to magmatic underplating and the thermal blanketing effect of sedimentary layers. Maximum crustal shear velocities vary between 3.5 and 3.9  km  s⁻¹ for most paths. An average lithospheric thickness of 60  km was observed, which is lower than expected for oceanic-type structure of similar age. We also observed low shear wave velocities in the lower crust and upper mantle. We suggest that high heat flow extending to depths of about 30  km beneath the surface can account for the thin lithosphere and observed low velocities. Anisotropy coefficients of 1–5 per cent in the shallow layers and >7 per cent in the upper mantle point to the existence of polarization anisotropy in the region.     

Lithospheric structure of the continent–continent collision zone: eastern Turkey

We infer the lithospheric structure in eastern Turkey using teleseismic and regional events recorded by 29 broad-band stations from the Eastern Turkey Seismic Experiment (ETSE). We combine the surface wave group velocities (Rayleigh and Love) with telesesimic receiver functions to jointly invert for the S -wave velocity structure, Moho depth and mantle-lid (lithospheric mantle) thickness. We also estimated the transverse anisotropy due to Love and Rayleigh velocity discrepancies. We found anomalously low shear wave velocities underneath the Anatolian Plateau. Average crustal thickness is 36 km in the Arabian Plate, 44 km in Anatolian Block and 48 km in the Anatolian Plateau. We observe very low shear wave velocities at the crustal portion (30–38 km) of the northeastern part of the Anatolian Plateau. The lithospheric mantle thickness is either not thick enough to resolve it or it is completely removed underneath the Anatolian Plateau. The shear velocities and anisotropy down to 100 km depth suggest that the average lithosphere–asthenosphere boundary in the Arabian Plate is about 90 and 70 km in Anatolian block. Adding the surface waves to the receiver functions is necessary to constrain the trade-off between velocity and the thickness. We find slower velocities than with the receiver function data alone. The study reveals three different lithospheric structures in eastern Turkey: the Anatolian plateau (east of Karliova Triple Junction), the Anatolian block and the northernmost portion of the Arabian plate. The boundary of lithospheric structure differences coincides with the major tectonic boundaries.     

Horizontal layered structure with heterogeneity beneath continents and island arcs from particle orbits of long-period P waves

We investigate the particle orbits of long-period (about 20 s) P waves observed with the global seismic network. By analysing 84 three-component seismograms recorded at 25 stations from 60 earthquakes occurring beneath 300 km, we quantitatively evaluate the orbits by three sets of eigenvalues and eigenvectors, using a covariance matrix method. The eigenvalues for P waves recorded at stations located on continents are explained by the standard horizontal layered structure model (iasp91). On the other hand, the orbits observed at stations close to island arcs are affected not only by the horizontal layered structure but also by heterogeneity due to subducting plates, mantle diapirs and so on. On the basis of a single-scattering model for a plane P wave, we quantify the heterogeneities by an isotropic scattering coefficient g0. Fitting the theoretical eigenvalues to the observed ones, we estimate g0 for the crust and upper mantle beneath continents to be less than 0.0005 km^-1, and the mean g₀ for the structure beneath island arcs to be about 0.0015 to 0.003 km^-1.     

Crust and upper mantle shear velocities from controlled sources

b
A two ship refraction profile was undertaken on the Australian continental shelf during the Banda Sea geophysical program, carried out by the Woods Hole Oceanographic Institution, the Scripps Institution of Oceanography and the Geological Survey of Indonesia. S waves originating close to the sea bottom were observed to distances of up to 1150 km at an array of stations in northern Australia.
These observations are interpreted as implying S mantle velocities of 4.60 km s^-1 from a depth of 45 km to a depth of 76 km and 4.72 km s^-1 below a depth of 76 km.
Ratios of the P and S travel times (V_p/V_s) have been determined to be 1.74 in the crust rising to a value of greater than 1.79 below a velocity discontinuity at a depth of 200 km. It is inferred that this high value arises because the effect of temperature is greater for S than for P .
Using the data from this and other studies in the shield region of Northern Australia it has been found that the _S travel times are significantly less than predicted by the Jeffreys—Bullen tables.     

Upper mantle shear structure of North America

Summary. The waveforms and travel times of S and SS phases in the range 10°–60° have been used to derive upper mantle shear velocity structures for two distinct tectonic provinces in North America. Data from earthquakes on the East Pacific Rise recorded at stations in western North America were used to derive a tectonic upper mantle model. Events on the north-west coast of North America and earthquakes off the coast of Greenland provided the data to investigate the upper mantle under the Canadian shield. All branches from the triplications due to velocity jumps near 400 and 660 km were observed in both areas. Using synthetic seismograms to model these observations placed tight constraints on heterogeneity in the upper mantle and on the details of its structure. SS–S travel-time differences of 30 s along with consistent differences in waveforms between the two data sets require substantial heterogeneity to at least 350 km depth. Velocities in the upper 170 km of the shield are about 10 per cent higher than in the tectonic area. At 250 km depth the shield velocities are still greater by about 4.5 per cent and they gradually merge near 400 km. Below 400 km no evidence for heterogeneity was found. The two models both have first-order discontinuities of 4.5 per cent at 405 km and 7.5 per cent at 695 km. Both models also have lids with lower velocities beneath. In the western model the lid is very thin and of relatively low velocity. In the shield the lid is 170 km thick with very high elocity (4.78 km s^-1); below it the velocity decreases to about 4.65 km s^-1. Aside from these features the models are relatively smooth, the major difference between them being a larger gradient in the tectonic region from 200 to 400 km.     

Localized velocity anomalies in the lower mantle

Summary. Two localized regions of velocity heterogeneity in the lower mantle with scale lengths of 1000–2000 km and 2 per cent velocity contrasts are detected and isolated through comparison of S, ScS, P and PcP travel times and amplitudes from deep earthquakes in Peru, Bolivia, Argentina and the Sea of Okhotsk. Comparison of the relative patterns of ScS-S differential travel times and S travel-time residuals across North American WWSSN and CSN stations for the different source regions provides baselines for interpreting which phases have anomalous times. A region of low S and P velocities is located beneath Northern Brazil and Venezuela at depths of 1700–2700 km. This region produces S -wave delays of up to 4 s for signals from deep Argentine events recorded at eastern North American stations. The localized nature of the anomaly is indicated by the narrow bounds in azimuth (15°) and take-off angle (13°) of the arrivals affected by it. The long period S -waves encountering this anomaly generally show 30–100 per cent amplitude enhancement, while the short-period amplitudes show no obvious effect. The second anomaly is a high-velocity region beneath the Caribbean originally detected by Jordan and Lynn, who used travel times from deep Peruvian events. The data from Argentine and Bolivian events presented here constrain the location of the anomaly quite well, and indicate a possible short- and long-period S -wave amplitude diminution associated with it. When the travel-time data are corrected for the estimated effects of these two anomalies, a systematic regional variation in ScS-S station residuals is apparent between stations east of and west of the Rocky Mountains. One possible explanation of this is a long wavelength lateral variation in the shear velocity structure of the lower mantle at depths greater than 2000 km beneath North America.     

Surface-wave propagation across the Mexican Volcanic Belt and the origin of the long-period seismic-wave amplification in the Valley of Mexico

A network of nine broad-band seismographs was operated from March to May 1994 to study the propagation of seismic waves across the Mexican Volcanic Belt (MVB) in the region of the Valley of Mexico. Analysis of the data from the network reveals an amplification of seismic waves in a wide period band al the stations situated in the southern part of the MVB.
The group velocities of the fundamental mode of the Rayleigh wave in the period range 2–13 s are found to be lower in the southern part of the MVB than in its northern part and in the region south of the MVB. The inversion of dispersion curves shows that the difference in group velocities is due to the presence of a superficial low-velocity layer (with an average S -wave velocity of 1.7 km s^-1 and an average thickness of 2 km) beneath the southern part of the MVB. This low-velocity zone is associated with the region of active volcanism.
Numerical simulations show that this superficial low-velocity layer causes a regional amplification of 8–10 s period signals, which is of the same order as the amplification measured from the data. This layer also increases the signal duration significantly because of the dispersion of the surface waves. These results confirm the hypothesis of Singh et al. (1995), who suggested that the regional amplification observed in the Valley of Mexico is due to the anomalously low shear-wave velocity of the shallow volcanic rocks in the southern MVB     

Upper crustal shear velocity models from higher mode Rayleigh wave dispersion in Scotland

Summary. Group velocities for first and second higher mode Rayleigh waves, in the frequency range 0.8–4.8 Hz, generated from a local earthquake of magnitude 3.7 M _L in western Scotland, are measured at stations along the 1974 LISPB line. These provide detailed information about the crustal structure west of the line. The data divide the region into seven apparently homogeneous provinces. Averaged higher mode velocity dispersion curves for each province are analysed simultaneously using a linearized inversion technique, yielding regionalized shear velocity profiles down to a depth of 17 km into the upper crust. Shear wave velocity is between 3.0 and 3.4 km s⁻¹ in the upper 2 km, with a slow increase to around 3.8 km s⁻¹. P -wave models computed using these results agree with profiles from the LISPB and LUST refraction experiments.     

Multimode surface waveform tomography of the Pacific Ocean: a closer look at the lithospheric cooling signature

We present a regional surface waveform tomography of the Pacific upper mantle, obtained using an automated multimode surface waveform inversion technique on fundamental and higher mode Rayleigh waves, to constrain the   V_SV   structure down to ∼400 km depth. We have improved on previous implementations of this technique by robustly accounting for the effects of uncertainties in earthquake source parameters in the tomographic inversion. We have furthermore improved path coverage in the South Pacific region by including Rayleigh wave observations from the French Polynesian Pacific Lithosphere and Upper Mantle Experiment deployment. This improvement has led to imaging of vertical low-velocity structures associated with hotspots within the South Pacific Super-Swell region. We have produced an age-dependent average cross-section for the Pacific Ocean lithosphere and found that the increase in   V_SV   with age is broadly compatible with a half-space cooling model of oceanic lithosphere formation. We cannot confirm evidence for a Pacific-wide reheating event. Our synthetic tests show that detailed interpretation of average   V_SV   trends across the Pacific Ocean may be misleading unless lateral resolution and amplitude recovery are uniform across the region, a condition that is difficult to achieve in such a large oceanic basin with current seismic stations.     

Crustal heterogeneity and velocity anisotropy from seismic studies in the USSR

Summary. The analysis of data of seismic crustal studies in the USSR, obtained from waves propagating at different azimuths, reveals considerable horizontal and vertical inhomogeneity of the crust. Against this background it is difficult to predict what kind of velocity anisotropy can be expected in the continental crust. The rare cases of disagreement in velocities on intersecting profiles can be attributed both to anisotropy and to horizontal crustal inhomogeneity. There is a definite disagreement in layer velocities measured by reflected waves: fine layers in the crust and upper mantle have been found to have anomalously high velocities. The role of anisotropy in these events is not clear. The frequently observed splitting of S -wave with different polarization, however, positively implies anisotropy in the Earth's crust.     

Anisotropy in the continental upper mantle: possible evidence from explosion seismology

Summary. Peculiarities of propagation in the upper mantle of western Europe are documented by profiles of stations recording body waves generated by explosions. Azimuthal variations of travel times and amplitudes of P waves and possible birefringence of S waves may be associated with an anisotropic layer at depths where the lithosphere-asthenosphere transition is supposed to be.     

Upper mantle and lithospheric heterogeneities in central and eastern Europe as observed by teleseismic receiver functions

Data from 90 permanent broad-band stations spread over central and eastern Europe were analysed using Ps receiver functions to study the crustal and upper-mantle structure down to the mantle transition zone. Receiver functions provide valuable information on structural features, which are important for the resolution of European lithospheric dynamics. Moho depths vary from less than 25 km in extensional areas in central Europe to more than 50 km at stations in eastern Europe (Craton) and beneath the Alpine–Carpathian belt. A very shallow Moho depth can be observed at stations in the Upper Rhine Graben area ( ca. 25 km), whereas, for example, stations in the SW Bohemian Massif show a significantly deeper Moho interface at a depth of 38 km. V_p / V_s ratios vary between 1.60 and 1.96, and show no clear correlation to the major tectonic units, thus probably representing local variations in crustal composition. Delayed arrivals of converted phases from the mantle transition zone are observed at many stations in central Europe, whereas stations in the cratonic area show earlier arrivals compared with those calculated from the IASP91 Earth reference model. Differential delay times between the P₄₁₀s and P₆₆₀s phases indicate a thickened mantle transition zone beneath the eastern Alps, the Carpathians and the northern Balkan peninsula, whereas the transition zone thickness in eastern and central Europe agrees with the IASP91 value. The thickening of the mantle transition zone beneath the eastern Alps and the Carpathians could be caused by cold, deeply subducted oceanic slabs.     

Surface wave tomography of the Barents Sea and surrounding regions

The goal of this study is to refine knowledge of the structure and tectonic history of the European Arctic using the combination of all available seismological surface wave data, including historical data that were not used before for this purpose. We demonstrate how the improved data coverage leads to better depth and spatial resolution of the seismological model and discovery of intriguing features of upper-mantle structure. To improve the surface wave data set in the European Arctic, we extensively searched for broad-band data from stations in the area from the beginning of the 1970s until 2005. We were able to retrieve surface wave observations from regional data archives in Norway, Finland, Denmark and Russia in addition to data from the data centres of IRIS and GEOFON. Rayleigh and Love wave group velocity measurements between 10 and 150 s period were combined with existing data provided by the University of Colorado at Boulder. This new data set was inverted for maps showing the 2-D group-velocity distribution of Love and Rayleigh waves for specific periods. Using Monte Carlo inversion, we constructed a new 3-D shear velocity model of the crust and upper mantle beneath the European Arctic which provides higher resolution and accuracy than previous models. A new crustal model of the Barents Sea and surrounding areas, published recently by a collaboration between the University of Oslo, NORSAR and the USGS, constrains the 3-D inversion of the surface wave data in the shallow lithosphere. The new 3-D model, BARMOD, reveals substantial variations in shear wave speeds in the upper mantle across the region with a nominal resolution of 1°× 1°. Of particular note are clarified images of the mantle expression of the continent-ocean transition in the Norwegian Sea and a deep, high wave speed lithospheric root beneath the Eastern Barents Sea, which presumably is the remnant of several Palaeozoic collisions.     

Waveform modelling of teleseismic S, Sp, SsPmP, and shear-coupled PL waves for crust- and upper-mantle velocity structure beneath Africa

We describe a waveform modelling technique and demonstrate its application to determine the crust- and upper-mantle velocity structure beneath Africa. Our technique uses a parallelized reflectivity method to compute synthetic seismograms and fits the observed waveforms by a global optimization technique based on a Very Fast Simulated Annealing (VFSA). We match the S , Sp, SsPmP and shear-coupled PL phases in seismograms of deep (200–800 km), moderate-to-large magnitude (5.5–7.0) earthquakes recorded teleseismically at permanent broad-band seismic stations in Africa. Using our technique we produce P - and S -wave velocity models of crust and upper mantle beneath Africa. Additionally, our use of the shear-coupled PL phase, wherever observed, improves the constraints for lower crust- and upper-mantle velocity structure beneath the corresponding seismic stations. Our technique retains the advantages of receiver function methods, uses a different part of the seismogram, is sensitive to both P - and S -wave velocities directly, and obtains helpful constraints in model parameters in the vicinity of the Moho. The resulting range of crustal thicknesses beneath Africa (21–46 km) indicates that the crust is thicker in south Africa, thinner in east Africa and intermediate in north and west Africa. Crustal P - (4.7–8 km s⁻¹) and S -wave velocities (2.5–4.7  km s⁻¹) obtained in this study show that in some parts of the models, these are slower in east Africa and faster in north, west and south Africa. Anomalous crustal low-velocity zones are also observed in the models for seismic stations in the cratonic regions of north, west and south Africa. Overall, the results of our study are consistent with earlier models and regional tectonics of Africa.     

Anomalous propagation of surface waves in the Barents Sea as inferred from NORSAR recordings

Summary. NORSAR recordings of Rayleigh waves generated by presumed nuclear explosions on central and southern Novaya Zemlya and in northwestern Siberia have been studied. Using a frequency time analysing technique and correcting for presumed known dispersion effects across the Baltic Shield, dispersion curves for two different paths across the southern part of the Barents Sea were obtained. The curves are very unusual in that they give extremely low velocities even for periods up to 20 s. For the path to the middle part of the island, the inversion of the data gives a model with sediments and consolidated sediments down to 25 km, followed by a 15-km thick basaltic layer and an upper mantle with a P velocity as low as 7.9 km/s. For the path to the southern part of Novaya Zemlya the data inversion gives a somewhat different model with sediments and consolidated sediments down to 8 km, followed by a 17-km thick zone with velocities close to granitic and a 15-km thick layer with basaltic velocities. Again the upper-mantle P velocity is only 7.9 km/s. Other indications of lateral inhomogeneities in the Barents Sea are obtained by utilizing the array's capability to determine the angle of approach of seismic waves. It is demonstrated that reflections both from inhomogeneities in the Barents Sea and the continental margin off Norway can be detected. For waves from the southern end of the island, a reflection from a strong discontinuity close to the direct path to the middle part of the island is found, whereas signals from this area include a reflected wave possibly coming from the edge of the Svalbard platform.     

Lithospheric thickness beneath the Dabie Shan, central eastern China from S receiver functions

P and S receiver functions obtained from a portable array of 34 broad-band stations in east central China provide a detailed image of the crust–mantle and lithosphere–asthenosphere boundaries (LAB) in the Dabie Shan and its adjacent areas. Clear S -to- P converted waves produced at the LAB show a thin lithosphere beneath the whole study area. Based on our results, the thickest lithosphere of 72 km is observed beneath the southern part of the area within the Yangtze craton, whereas beneath the North-China platform, the lithosphere is only 60 km thick. S receiver functions also reveal, in good agreement with P receiver functions, a maximum depth of the Moho beneath the Dabie Shan orogen at approximately 40 km. Furthermore, we interpret the structural difference at 32° latitude as the probable location of the mantle suture formed between the Yangtze and the Sino-Korean cratons.     

Absolute S-velocity estimation from receiver functions

We present a novel method to recover absolute S velocities from receiver functions.
For a homogeneous half-space the S velocity can be calculated from the horizontal slowness and the angle of surface particle motion for an incident P wave. Generally, the calculated S velocity is an apparent half-space value which depends on model inhomogeneity and P -waveform. We therefore, suggest to calculate such apparent half-space S velocities from low-pass filtered (smoothed) receiver functions using a suite of filter-parameters, T . The use of receiver functions neutralize the influence of the P -waveform, and the successive low-pass filterings emphasize the variation of S velocity with depth.
We apply this   V _{S ,app.}( T )  technique to teleseismic data from three stations: FUR, BFO and SUM, situated on thick sediments, bedrock and the Greenland ice cap, respectively. The observed   V _{S ,app.}( T )  curves indicate the absolute S velocities from the near surface to the uppermost mantle beneath each station, clearly revealing the different geological environments. Application of linearized, iterative inversion quantify these observations into   V _S ( z )  models, practically independent of the S -velocity starting model. The obtained models show high consistency with independent geoscientific results. These cases provide also a general validation of the   V _{S ,app.}( T )  method.
We propose the computation of   V _{S ,app.}( T )  curves for individual three-component broad-band stations, both for direct indication of the S velocities and for inverse modelling.     

Global anisotropic phase velocity maps for higher mode Love and Rayleigh waves

It is well established that the Earth's uppermost mantle is anisotropic, but there are no clear observations of anisotropy in the deeper parts of the mantle. Surface waves are well suited to observe anisotropy since they carry information about both radial and azimuthal anisotropy. Fundamental mode surface waves, for commonly used periods up to 200 s, are sensitive to structure in the first few hundred kilometres, and therefore, do not provide information on anisotropy below. Higher mode surface waves have sensitivities that extend to and beyond the transition zone, and should thus give insight about azimuthal anisotropy at greater depths. We have measured higher mode Love and Rayleigh phase velocities using a model space search approach, which provides us with consistent relative uncertainties from measurement to measurement and from mode to mode. From these phase velocity measurements, we constructed global anisotropic phase velocity maps. Prior to inversion, we determine the optimum relative weighting for anisotropy. We present global azimuthal phase velocity maps for higher mode Rayleigh waves (up to the sixth higher mode) and Love waves (up to the fifth higher mode) with corresponding average model uncertainties. The anisotropy we derive is robust within the uncertainties for all modes. Given the ray theoretical sensitivity kernels of Rayleigh and Love wave modes, the source of anisotropy is complex, but mainly located in the asthenosphere and deeper. Our models show a good correspondence with other studies for the fundamental mode, but we have been able to achieve higher resolution.