The utilization of boron and strontium isotopes for the assessment of boron contamination of the Cecina River alluvial aquifer (central-western Tuscany,Italy)

The groundwater B concentration in the alluvial aquifer of the upper Cecina River basin in Tuscany, Italy, often exceeds the limit of 1 mg L⁻¹ set by the European Union for drinking water. On the basis of hydrogeological and geochemical observations, the main source of the B contamination of groundwater has been attributed to past releases into streams of exhausted, B-rich geothermal waters and/or mud derived from boric acid manufacturing in Larderello. The releases were discontinued 25–30 years ago.This study confirms that the B dissolved in groundwater is anthropogenic. In fact, the δ¹¹B values of groundwater B match the range −12.2‰ to −13.3‰ of the Turkish B mineral (colemanite) processed in boric acid manufacturing, in the course of which no significant isotopic effects have been observed. This isotopic tracing of the Cecina alluvial aquifer occurs just below the confluence of the Possera Creek, which carries the B releases from Larderello. Strontium isotope ratios support this conclusion.At about 18 km from the Possera Creek confluence, the groundwater δ¹¹B drops to much more negative values (−22‰ to −27‰), which are believed to be produced by adsorption–desorption interactions between dissolved B and the aquifer matrix. The δ¹¹B of B fixed in well bottom sediments shows a similar variation. At present, desorption is prevailing over adsorption because the releases of B-rich water have ceased. A theoretical model is suggested to explain the isotopic trends observed.Thus, B isotopes appear to be a powerful tool for identifying the origin of B contamination in natural waters, although isotopic effects associated with adsorption–desorption processes may complicate the picture, to some extent.     

Geochemical and isotopic variations in shallow groundwater in areas of the Fayetteville Shale development,north-central Arkansas

Exploration of unconventional natural gas reservoirs such as impermeable shale basins through the use of horizontal drilling and hydraulic fracturing has changed the energy landscape in the USA providing a vast new energy source. The accelerated production of natural gas has triggered a debate concerning the safety and possible environmental impacts of these operations. This study investigates one of the critical aspects of the environmental effects; the possible degradation of water quality in shallow aquifers overlying producing shale formations. The geochemistry of domestic groundwater wells was investigated in aquifers overlying the Fayetteville Shale in north-central Arkansas, where approximately 4000 wells have been drilled since 2004 to extract unconventional natural gas. Monitoring was performed on 127 drinking water wells and the geochemistry of major ions, trace metals, CH₄ gas content and its C isotopes (δ¹³C_CH4), and select isotope tracers (δ¹¹B, ⁸⁷Sr/⁸⁶Sr, δ²H, δ¹⁸O, δ¹³C_DIC) compared to the composition of flowback-water samples directly from Fayetteville Shale gas wells. Dissolved CH₄ was detected in 63% of the drinking-water wells (32 of 51 samples), but only six wells exceeded concentrations of 0.5 mg CH₄/L. The δ¹³C_CH4 of dissolved CH₄ ranged from −42.3‰ to −74.7‰, with the most negative values characteristic of a biogenic source also associated with the highest observed CH₄ concentrations, with a possible minor contribution of trace amounts of thermogenic CH₄. The majority of these values are distinct from the reported thermogenic composition of the Fayetteville Shale gas (δ¹³C_CH4 = −35.4‰ to −41.9‰). Based on major element chemistry, four shallow groundwater types were identified: (1) low (<100 mg/L) total dissolved solids (TDS), (2) TDS > 100 mg/L and Ca–HCO₃ dominated, (3) TDS > 100 mg/L and Na–HCO₃ dominated, and (4) slightly saline groundwater with TDS > 100 mg/L and Cl > 20 mg/L with elevated Br/Cl ratios (>0.001). The Sr (⁸⁷Sr/⁸⁶Sr = 0.7097–0.7166), C (δ¹³C_DIC = −21.3‰ to −4.7‰), and B (δ¹¹B = 3.9–32.9‰) isotopes clearly reflect water–rock interactions within the aquifer rocks, while the stable O and H isotopic composition mimics the local meteoric water composition. Overall, there was a geochemical gradient from low-mineralized recharge water to more evolved Ca–HCO₃, and higher-mineralized Na–HCO₃ composition generated by a combination of carbonate dissolution, silicate weathering, and reverse base-exchange reactions. The chemical and isotopic compositions of the bulk shallow groundwater samples were distinct from the Na–Cl type Fayetteville flowback/produced waters (TDS ∼10,000–20,000 mg/L). Yet, the high Br/Cl variations in a small subset of saline shallow groundwater suggest that they were derived from dilution of saline water similar to the brine in the Fayetteville Shale. Nonetheless, no spatial relationship was found between CH₄ and salinity occurrences in shallow drinking water wells with proximity to shale-gas drilling sites. The integration of multiple geochemical and isotopic proxies shows no direct evidence of contamination in shallow drinking-water aquifers associated with natural gas extraction from the Fayetteville Shale.     

Sources of groundwater nitrate revealed using residence time and isotope methods

Nitrate concentrations approaching and greater than the maximum contaminant level are impairing the viability of many groundwater basins as drinking water sources. Nitrate isotope data are effective in determining contaminant sources, especially when combined with other isotopic tracers such as stable isotopes of water and ³H–He ages to give insight into the routes and timing of NO₃ inputs to the flow system. This combination of techniques is demonstrated in Livermore, CA, where it is determined that low NO₃ reclaimed wastewater predominates in the NW, while two flowpaths with distinct NO₃ sources originate in the SE. Along the eastern flowpath, δ¹⁵N values greater than 10‰ indicate that animal waste is the primary source. Diminishing concentrations over time suggest that contamination results from historical land use practices. The other flowpath begins in an area where rapid recharge, primarily of low-NO₃ imported water (identified by stable isotopes of water and a ³H–He residence time of <1 year), mobilizes a significant local NO₃ source, bringing groundwater concentrations up to 53 mg NO₃ L⁻¹. In this area, artificial recharge of imported water via local arroyos increases the flux of NO₃ to the regional aquifer. The low δ¹⁵N value (3.1‰) in this location implicates synthetic fertilizer. In addition to these anthropogenic sources, natural NO₃ background levels between 15 and 20 mg NO₃ L⁻¹ are found in deep wells with residence times greater than 50 a.     

In situ LA–MC–ICP–MS boron isotope and zircon U–Pb age determinations of Paleoproterozoic borate deposits in Liaoning Province,northeastern China

A large number of Paleoproterozoic borate deposits are hosted by the lower units of a volcanic-sedimentary sequence in Liaoning Province, northeastern China, and are a major source of boron in China. The ore-bearing wall rocks in the deposits are serpentinized ultrabasic rocks and carbonates, with layered leptynites, leptites, amphibolites, and migmatites adjacent to the ore. Both the borate ores and country rocks contain tourmaline, although the country rocks have much lower abundances of the mineral. Based on in situ boron isotope measurements using laser ablation–multi-collector–inductively coupled plasma–mass spectrometry (LA–MC–ICP–MS), boron isotope data show that: (1) δ¹¹B values of borate ores range from + 6.8‰ to + 13.9‰ (mean + 10.8‰); (2) tourmalines from the borate ores have δ¹¹B values from + 9.5‰ to + 12.7‰; and (3) the wall rocks within the borate ores yield slightly lower δ¹¹B values ranging from + 5.7‰ to + 7.6‰, and those outside the deposits from − 9.9‰ to − 5.9‰. Positive δ¹¹B values in borates as well as in tourmalines inside the mining area indicate that boron in these Paleoproterozoic borate deposits was derived from marine evaporites. δ³⁴S_V-CDT (where V-CDT is Vienna Canyon Diablo Troilite) values of borate ores, serpentinized marbles, and anhydrites range from + 16.1‰ to + 24.7‰, whereas δ¹³C_V-PDB (where V-PDB is Vienna Pee Dee Belemnite) values of marbles range from + 3.2‰ to + 5.9‰. These isotopic characteristics are interpreted to reflect formation in a marine evaporative environment. LA–MC–ICP–MS zircon weighted²⁰⁷Pb/²⁰⁶Pb ages of leptite and serpentinized olivine basalt from the hanging wall of the borate deposits are 2139 ± 13 Ma and 2130 ± 19 Ma, respectively. Therefore, the (~ 2.2 Ga) borate deposits may have originated from marine evaporative boron-bearing sediments, which were interbedded within bimodal volcanic rocks during the early stages of development of the Liaoji rift.     

Behaviour of boron and strontium isotopes in groundwater–aquifer interactions in the Cornia Plain (Tuscany,Italy)

The Cornia Plain alluvial aquifer, in Tuscany, is exploited intensely to meet the demand for domestic, irrigation and industrial water supplies. The B concentration of groundwater, however, is often above the European limit of 1 mg L⁻¹, with the result that exploitation of these water resources requires careful management. Boron and Sr isotopes have been used as part of a study on the origin and distribution of B dissolved in groundwater, and indirectly as a contribution to the development of appropriate water management strategies.The geochemistry of the Cornia Plain groundwater changes from a HCO₃ facies in the inland areas to a Cl facies along the coastal belt, where seawater intrusion takes place. The B concentration of groundwater increases towards the coastal areas, while the ¹¹B/¹⁰B ratio decreases. This indicates that there is an increasing interaction between dissolved B and the sediments forming the aquifer matrix, whose B content is in the order of 100 mg kg⁻¹. Adsorption–desorption exchanges take place between water and the sediment fine fraction rich in clay minerals, with a net release of B from the matrix into the groundwater, and a consequent δ¹¹B shift from positive to negative values. The aquifer matrix sediments therefore seem to be the major source of B dissolved in the groundwater.The groundwater–matrix interactions triggered by the ionic strength increase caused by seawater intrusion can also be detected in the Ca–Na ion exchanges. Dissolved Sr follows a trend similar to that of Ca, while the ⁸⁷Sr/⁸⁶Sr ratio is equal to that of the exchangeable Sr of the aquifer matrix and therefore does not change significantly.These results have helped to define a new strategy for groundwater exploitation, with the final objective of reducing B concentration in the water extracted from the aquifer.     

Using dual isotopic data to track the sources and behaviors of dissolved sulfate in the western North China Plain

This paper investigated the sources and behaviors of sulfate in groundwater of the western North China Plain using sulfur and oxygen isotopic ratios. The groundwaters can be categorized into karst groundwater (KGW), coal mine drainage (CMD) and pore water (subsurface saturated water in interstices of unconsolidated sediment). Pore water in alluvial plain sediments could be further classified into unconfined groundwater (UGW) with depth of less than 30 m and confined groundwater (CGW) with depth of more than 60 m. The isotopic compositions of KGW varied from 9.3‰ to 11.3‰ for δ³⁴S_SO4 with the median value of 10.3‰ (n = 4) and 7.9‰ to 15.6‰ for δ¹⁸O_SO4 with the median value of 14.3‰ (n = 4) respectively, indicating gypsum dissolution in karst aquifers. δ³⁴S_SO4 and δ¹⁸O_SO4 values of sulfate in CMD ranged from 10.8‰ to 12.4‰ and 4.8‰ to 8.7‰ respectively. On the basis of groundwater flow path and geomorphological setting, the pore water samples were divided as three groups: (1) alluvial–proluvial fan (II₁) group with high sulfate concentration (median values of 2.37 mM and 1.95 mM for UGW and CGW, respectively) and positive δ³⁴S_SO4 and δ¹⁸O_SO4 values (median values of 8.8‰ and 6.9‰ for UGW, 12.0‰ and 8.0‰ for CGW); (2) proluvial slope (II₂) group with low sulfate concentration (median values of 1.56 mM and 0.84 mM for UGW and CGW, respectively) and similar δ³⁴S_SO4 and δ¹⁸O_SO4 values (median values of 9.0‰ and 7.4‰ for UGW, 10.2‰ and 7.7‰ for CGW); and (3) low-lying zone (II₃) group with moderate sulfate concentration (median values of 2.13 mM and 1.17 mM for UGW and CGW, respectively) and more positive δ³⁴S_SO4 and δ¹⁸O_SO4 values (median values of 10.7‰ and 7.7‰ for UGW, 20.1‰ and 8.8‰ for CGW). In the present study, three major sources of sulfate could be differentiated as following: sulfate dissolved from Ordovician to Permian rocks (δ³⁴S_SO4 = 10–35‰ and δ¹⁸O_SO4 = 7–20‰), soil sulfate (δ³⁴S_SO4 = 5.9‰ and δ¹⁸O_SO4 = 5.8‰) and sewage water (δ³⁴S_SO4 = 10.0‰ and δ¹⁸O_SO4 = 7.6‰). Kinetic fractionations of sulfur and oxygen isotopes as a result of bacterial sulfate reduction (BSR) were found to be evident in the confined aquifer in stagnant zone (II₃), and enrichment factors of sulfate–sulfur and sulfate–oxygen isotopes calculated by Rayleigh equation were −12.1‰ and −4.7‰ respectively along the flow direction of groundwater at depths of 60–100 m. The results obtained in this study confirm that detailed hydrogeological settings and identification of anthropogenic sources are critical for elucidating evolution of δ³⁴S_SO4 and δ¹⁸O_SO4 values along with groundwater flow path, and this work also provides a useful framework for understanding sulfur cycling in alluvial plain aquifers.     

A conceptual framework of groundwater flow in some crystalline aquifers in Southeastern Ghana

A conceptual groundwater flow model was developed for the crystalline aquifers in southeastern part of the Eastern region, Ghana. The objective was to determine approximate levels of groundwater recharge, estimate aquifer hydraulic parameters, and then test various scenarios of groundwater extraction under the current conditions of recharge. A steady state groundwater flow model has been calibrated against measured water levels of 19 wells in the area. The resulting recharge is estimated to range from 8.97 × 10^?5 m/d to 7.14 × 10^?4 m/d resulting in a basin wide average recharge of about 9.6% of total annual precipitation, which results in a basin wide quantitative recharge of about 2.4 million m³/d in the area. This compares to recharge estimated from the chloride mass balance of 7.6% of precipitation determined in this study. The general groundwater flow in the area has also been determined to conform to the general northeast–southwest structural grain of the country. The implication is that the general hydrogeology is controlled by post genetic structural entities imposed on the rocks to create ingresses for sufficient groundwater storage and transport. Calibrated aquifer hydraulic conductivities range between 0.99 m/d and over 19.4 m/d. There is a significant contribution of groundwater discharge to stream flow in the study area. Increasing groundwater extraction will have an effect on stream flow. This study finds that the current groundwater extraction levels represent only 0.17% of the annual recharge from precipitation, and that groundwater can sustain future increased groundwater demands from population growth and industrialization.     

Intermediate sulfidation epithermal gold-base metal deposits in Tertiary subaerial volcanic rocks,Sahinli/Tespih Dere (Lapseki/Western Turkey)

Gold in the Sahinli and Tespih Dere intermediate sulfidation gold-base metal deposits in Western Turkey occurs in relatively deep epithermal quartz veins along with base metal minerals which have epithermal textures, including plumose quartz, vug infills, comb and cockade textures and matrix-supported milled breccias. The total sulfide content of the veins in the area is variable ranging from < 1% to 60% and is dominated by pyrite, galena, sphalerite and chalcopyrite. Sphalerite is Fe-poor (0.6 to 1.4 mol% FeS). Minor amounts of Ag-rich tetrahedrite are present. Primary hydrothermal alteration minerals include illite/muscovite, mixed-layer illite/smectite (11.6 Å) and clinochlore towards the east and, alunite, dickite/nacrite and pyrophyllite towards the west at Sahinli; major illite/muscovite and dickite occur at Tespih Dere and Sarioluk, respectively.Fluid inclusions in main-stage quartz at Sahinli are only liquid-rich, with homogenization temperatures ranging from 220 to 322 °C and the majority of T_h values between 250 and 300 °C. Salinity ranges from 4.3 to 6.9 wt.% NaCl equiv. First ice-melting temperatures (T_mf) between ?24.5 and ?19.0 °C indicate that the fluids were dominated by NaCl – H₂O during mineralization. The relatively higher average T_h at the Tespih Dere deposit (295 °C) is attributed to a relatively deeper level of exposure.Calculated δ¹⁸O values indicate that ore-forming hydrothermal fluids in the study area had δ¹⁸O_H2O ranging from + 1.1 to + 9.7‰ (average = 3.8‰), strongly ¹⁸O-enriched compared with present-day hydrothermal meteoric water in the area (δ¹⁸O = ?8.5‰). δD values of fluid inclusions in quartz range from ?58 to ?93‰ and δD values of clay minerals and alunite from ?40 to ?119‰. δD values from intermediate argillic alteration (average = ?68‰) in the study area are very similar to δD values of the present-day local geothermal system (average δD = ?54‰) whereas δD values from advanced-argillic alteration (average δD = ?33‰) are very different from the present-day local geothermal system.The δ³⁴S values in samples from the Sahinli and Tespih Dere deposits average ?2.9‰ for pyrite; ?3.3‰ for chalcopyrite; ?5.4‰ for sphalerite and ?7.6‰ for galena. These data are consistent with derivation of the sulfur from either igneous rocks or possibly from local wallrock.     

Enhancement of in situ biodegradation of organic compounds in groundwater by targeted pump and treat intervention

This study demonstrates the value of targeted pump and treatment (PAT) to enhance the in situ biodegradation of organic contaminants in groundwater for improved restoration. The approach is illustrated for a plume of phenolic compounds in a sandstone aquifer, where PAT is used for hydraulic containment and removal of dissolved phase contaminants from specific depth intervals. Time-series analysis of the plume hydrochemistry and stable isotope composition of dissolved species (δ³⁴S-SO₄, δ¹³C-CH₄, δ¹³C-TDIC (TDIC = Total Dissolved Inorganic Carbon)) in groundwater samples from high-resolution multilevel samplers were used to deduce changes in the relative significance of biodegradation processes and microbial activity in the plume, induced by the PAT system over 3 years. The PAT system has reduced the maximum contaminant concentrations (up to 6800 mg L⁻¹ total phenols) in the plume by 50% to ∼70% at different locations. This intervention has (i) stimulated in situ biodegradation in general, with an approximate doubling of contaminant turnover based on TDIC concentration, which has increased from <200 mg L⁻¹ to >350 mg L⁻¹, (ii) enhanced the activity of SO₄-reducing microorganisms (marked by a declining SO₄ concentration with corresponding increase in SO₄-δ³⁴S to values >7–14‰_V-CDT relative to background values of 1.9–6.5‰_V-CDT), and (iii) where the TDIC increase is greatest, has changed TDIC-δ¹³C from values of −10 to −15‰_V-PDB to ∼−20‰_V-PDB. This indicates an increase in the relative importance of respiration processes (including denitrification and anaerobic methane oxidation, AMO) that yield ¹³C-depleted TDIC over fermentation and acetoclastic methanogenesis that yield ¹³C-enriched TDIC in the plume, leading to higher contaminant turnover. The plume fringe was found to be a zone of enhanced biodegradation by SO₄-reduction and methanogenesis. Isotopically heavy methane compositions (up to −47.8‰_V-PDB) and trends between δ¹³C-TDIC and δ¹³C-CH₄ suggest that AMO occurs at the plume fringe where the contaminant concentrations have been reduced by the PAT system. Mass and isotope balances for inorganic carbon in the plume confirm the shift in spatial dominance of different biodegradation processes and significant increase in contribution of anaerobic respiration for contaminant biodegradation in zones targeted by the PAT system. The enhanced in situ biodegradation results from a reduction in organic contaminant concentrations in the plume to levels below those that formerly suppressed microbial activity, combined with increased supply of soluble electron acceptors (e.g. nitrate) into the plume by dispersion. An interruption of the PAT system and recovery of the dissolved organic contaminant concentrations towards former values highlights the dynamic nature of this enhancement on restoration and relatively rapid response of the aquifer microorganisms to changing conditions induced by the PAT system. In situ restoration using this combined engineered and passive approach has the potential to manage plumes of biodegradable contaminants over shorter timescales than would be possible using these methods independently. The application of PAT in this way strongly depends on the ability to ensure an adequate flux of dissolved electron acceptors into the plume by advection and dispersion, particularly in heterogeneous aquifers.     

Geochemical and isotopic approach to maturity/source/mixing estimations for natural gas and associated condensates in the Thrace Basin,NW Turkey

The Tertiary Thrace Basin located in NW Turkey comprises 9 km of clastic-sedimentary column ranging in age from Early Eocene to Recent in age. Fifteen natural gas and 10 associated condensate samples collected from the 11 different gas fields along the NW–SE extending zone of the northern portion of the basin were evaluated on the basis of their chemical and individual C isotopic compositions. For the purpose of the study, the genesis of CH₄, thermogenic C₂₊ gases, and associated condensates were evaluated separately.Methane appears to have 3 origins: Group-1 CH₄ is bacteriogenic (Calculated δ¹³C_C1–C = −61.48‰; Silivri Field) and found in Oligocene reservoirs and mixed with the thermogenic Group-2 CH₄. They probably formed in the Upper Oligocene coal and shales deposited in a marshy-swamp environment of fluvio-deltaic settings. Group-2 (δ¹³C_C1–C = −35.80‰; Hamitabat Field) and Group-3 (δ¹³C_1–C = −49.10‰; Değirmenköy Field) methanes are thermogenic and share the same origin with the Group-2 and Group-3 C₂₊ gases. The Group-2 C₂₊ gases include 63% of the gas fields. They are produced from both Eocene (overwhelmingly) and Oligocene reservoirs. These gases were almost certainly generated from isotopically heavy terrestrial kerogen (δ¹³C = −21‰) present in the Eocene deltaic Hamitabat shales. The Group-3 C₂₊ gases, produced from one field, were generated from isotopically light marine kerogen (δ¹³C = −29‰). Lower Oligoce ne Mezardere shales deposited in pro-deltaic settings are believed to be the source of these gases.The bulk and individual n-alkane isotopic relationships between the rock extracts, gases, condensates and oils from the basin differentiated two Groups of condensates, which can be genetically linked to the Group-2 and -3 thermogenic C₂₊ gases. However, it is crucial to note that condensates do not necessarily correlate to their associated gases.Maturity assessments on the Group-1 and -2 thermogenic gases based on their estimated initial kerogen isotope values (δ¹³C = −21‰; −29‰) and on the biomarkers present in the associated condensates reveal that all the hydrocarbons including gases, condensates and oils are the products of primary cracking at the early mature st age (R_eq = 0.55–0.81%). It is demonstrated that the open-system source conditions required for such an early-mature hydrocarbon expulsion exist and are supported by fault systems of the basin.     

Stable oxygen and carbon isotopes of carbonate concretions of the Miocene Yeonil Group in the Pohang Basin,Korea: Types of concretions and formation condition

Carbonate concretions in the Miocene sedimentary rocks of the Yeonil Group in the Pohang Basin (Korea) were investigated in terms of stable oxygen and carbon isotope composition to delineate the origin and associated diagenetic environment for their formation. Carbonate concretions are widely distributed in all the sedimentary rocks in the Pohang Basin, showing that the calcitic concretions are preserved within the mass-flow deposits and the dolomitic ones mostly in the hemipelagic siliceous rocks (diatomites). Concretions can be classified into four different types, on the basis of the stable isotopic signatures, each of which represents its own geochemical range.Type I concretions are calcitic and are composed of micrite to microspar. They occur in the conglomerates and sandstones which were deposited by mass flows (debris flow to turbidity current). It shows relatively lower δ¹⁸O (− 14.0 to − 9.3‰) and δ¹³C (− 19.6 to − 8.4‰) values. These concretions grew in a sulfate reducing zone under the influence of residual ambient seawater which had been significantly modified by volcanogenic sediments. Type II concretions are also calcitic, composed mostly of micrite with minor microspar and found in the sandstones. These concretions are characterized by relatively high δ¹⁸O (+ 1.8 to + 2.4‰) and variable δ¹³C (− 17.3 to − 0.4‰) values. These isotopic signatures reflect that Type II concretions formed from just beneath the sediment/water interface down to the sulfate reducing zone through the early stage of methanogenesis. Type III concretions are also calcitic, and composed largely of micrite with a minor contribution of microspar. They are observed in hemipelagic mudrocks which were deposited under the influence of mass flows. They are characterized by intermediate to high δ¹⁸O (− 4.6 to + 1.6‰) and high δ¹³C (− 1.3 to + 8.8‰) values. These concretions grew in a methanogenic zone by residual ambient seawater and/or seawater slightly modified by reaction with volcanogenic sediments. Type IV concretions are dolomite with calcite inclusion, and occur in hemipelagic siliceous rocks. These concretions are mostly composed of micrite and characterized by variable δ¹⁸O (− 9.1 to + 0.7‰) and high δ¹³C (+ 3.1 to + 17.9‰) values, suggesting formation in the methanogenic zone, although the residual ambient seawater is slightly modified by volcanogenic sediments.The same type of the concretions is widely distributed throughout the basin and always shows its own distinctive stable isotopic signature. This means that the formation of the given type depends upon the lithology and composition of host sediments that are closely related to the depositional process of the fan-delta systems regardless of their localities. Further, the different types of concretions are also found at the different, but closely spaced stratigraphic levels in the same locality, displaying the distinctive diagenetic conditions for each type. Such preservation of the unique diagenetic signatures in individual type of concretion suggests that the concretions formed in a completely closed diagenetic system. Therefore, caution should be made to simplify and generalize the diagenetic condition for the formation of any concretions in a large sedimentary basin.     

Laser ablation multicollector ICPMS determination of δ11B in geological samples

A method for the in situ single spot δ¹¹B characterisation of geological materials with laser ablation multicollector ICP mass spectrometry (LA-MC-ICPMS) has been developed. The mass spectrometer was equipped with both Faradays and multiple ion counters. Four samples with different B contents (12–31,400 ppm) and isotopic compositions (δ¹¹B are between −8.71 and +13.6‰) were analysed. Samples include the B4 tourmaline and 3 MPI-DING glasses (StHs6/80-G, GOR132-G and GOR128-G).All sources of B isotopic fractionation during the analysis (mass bias, laser-induced isotopic fractionation and detector efficiency drift) have been evaluated and quantified. Instrumental mass bias is the major source of fractionation, altering the original isotopic ratio up to 13%. Fractionation related to laser sampling and transport to the ICP was found to be very low (less than 0.0015% s⁻¹). Fractionation effects due to drift in ion counter efficiencies were found to be significant. Nevertheless, the “standard-sample-standard” bracketing approach could be used to correct for the above fractionation effects using NIST SRM 610 as external standard.With spot sizes of 60–80 μm in diameter, geologically meaningful results can be achieved on samples containing at least 10 ppm B, i.e., results with precisions that can discriminate between the different reservoirs on Earth. Data obtained with Faraday detectors on NIST SRM 610 and B4 tourmaline show high precision (down to 0.04‰, 1σ) and accuracy. Boron isotope ratios measured in the glass samples using multiple ion counting show significantly higher standard deviations (up to 2.5‰, 1σ), but they are very close to the values that can be expected from counting statistics. No significant variations with spot size or B contents were observed. Most of the values are within 1σ level of the reference values.The developed method was applied to a series of ashes from Mt. Etna erupted in 1995 having B contents between 14 and 20 ppm. The B isotope compositions of the ashes are between −4.8 and −10.7‰, with a weighted average value of −8.0 ± 1.9‰ (1σ).     

Post-Chicxulub depositional and diagenetic history of the northwestern Yucatan Peninsula,Mexico

The Chicxulub Sedimentary Basin of the northwestern Yucatan Peninsula, Mexico, which was formed because of the largest identified Phanerozoic bolide impact on Earth, became a site of deposition of dominantly marine carbonate sediments during most of the Cenozoic Era. This is a study of the filling and diagenetic history of this basin and surrounding areas. The study makes use of lithologic, biostratigraphic, petrographic, and geochemical data obtained on core samples from boreholes drilled throughout the northwestern Yucatan Peninsula.The core sample data indicate that: 1) The Chicxulub Sedimentary Basin concentrated the deposition of pelagic and outer-platform sediments during the Paleocene and Eocene, and, in places, during the Early Oligocene, as well, and filled during the Middle Miocene, 2) deeper-water limestone also is present within the Paleocene and Lower Eocene of the proposed Santa Elena Depression, which is located immediately south of the Basin, 3) shallow-water deposits are relatively more abundant outside the Basin and Depression than inside, 4) the autigenic and allogenic silicates from the Paleogene formations are the most abundant inside the Depression, 5) sediment deposition and diagenesis within the Basin also were controlled by impact crater topography, 6) the abundance of the possible features of subaerial exposure increases upward and outward from the center of the Basin, and 7) the formation of replacive low-magnesium calcite and dolomite, dedolomitization, dissolution, and precipitation of vug-filling calcite and dolomite cement have been more common outside the Basin than inside.δ¹⁸O in whole-rock (excluding vug-filling) calcite from core samples ranges from − 7.14‰ to + 0.85‰ PDB. δ¹³C varies from − 6.92‰ to + 3.30‰ PDB. Both stable isotopes correlate inversely with the abundance of subaerial exposure features indicating that freshwater diagenesis has been extensive especially outside and at the edge of the Chicxulub Sedimentary Basin.δ¹⁸O and δ¹³C in whole-rock (excluding vug-filling) dolomite ranges from − 5.54‰ to + 0.87‰ PDB and − 4.63‰ to + 3.38‰ PDB, respectively. Most dolomite samples have negative δ¹⁸O and positive δ¹³C suggesting that replacive dolomitization involved the presence of a fluid dominated by freshwater and/or an anomalously high geothermal gradient.Most dolomite XRD-determined mole percent CaCO₃ varies between 51 and 56. Replacive dolomite is larger, more euhedral, and less stoichiometric inside the Chicxulub Sedimentary Basin than outside.     

Geochemical and oxygen isotope signatures of mantle corundum megacrysts from the Mbuji-Mayi kimberlite,Democratic Republic of Congo,and the Changle alkali basalt,China

Oxygen isotope signatures of ruby and sapphire megacrysts, combined with trace-element analysis, from the Mbuji-Mayi kimberlite, Democratic Republic of Congo, and the Changle alkali basalt, China, provide clues to specify their origin in the deep Earth. At Mbuji-Mayi, pink sapphires have δ¹⁸O values in the range 4.3 to 5.4‰ (N = 10) with a mean of 4.9 ± 0.4‰, and rubies from 5.5 to 5.6‰ (N = 3). The Ga/Mg ratio of pink sapphires is between 1.9 and 3.9, and in rubies, between 0.6 and 2.6. The blue or yellow sapphires from Changle have δ¹⁸O values from 4.6 to 5.2 ‰, with a mean of 4.9 ± 0.2‰ (N = 9). The Ga/Mg ratio is between 5.7 and 11.3. The homogenous isotopic composition of ruby suggests a derivation from upper mantle xenoliths (garnet lherzolite, pyroxenite) or metagabbros and/or lower crustal garnet clinopyroxenite eclogite-type xenoliths included in kimberlites. Data from the pink sapphires from Mbuji-Mayi suggest a mantle origin, but different probable protoliths: either subducted oceanic protolith transformed into eclogite with δ¹⁸O values buffered to the mantle value, or clinopyroxenite protoliths in peridotite. The Changle sapphires have a mantle O-isotope signature. They probably formed in syenitic magmas produced by low degree partial melting of a spinel lherzolite source. The kimberlite and the alkali basalt acted as gem conveyors from the upper mantle up to the surface.     

Groundwater recharge,circulation and geochemical evolution in the source region of the Blue Nile River,Ethiopia

Geochemical and environmental isotope data were used to gain the first regional picture of groundwater recharge, circulation and its hydrochemical evolution in the upper Blue Nile River basin of Ethiopia. Q-mode statistical cluster analysis (HCA) was used to classify water into objective groups and to conduct inverse geochemical modeling among the groups. Two major structurally deformed regions with distinct groundwater circulation and evolution history were identified. These are the Lake Tana Graben (LTG) and the Yerer Tullu Wellel Volcanic Lineament Zone (YTVL). Silicate hydrolysis accompanied by CO₂ influx from deeper sources plays a major role in groundwater chemical evolution of the high TDS Na–HCO₃ type thermal groundwaters of these two regions. In the basaltic plateau outside these two zones, groundwater recharge takes place rapidly through fractured basalts, groundwater flow paths are short and they are characterized by low TDS and are Ca–Mg–HCO₃ type waters. Despite the high altitude (mean altitude ∼2500 masl) and the relatively low mean annual air temperature (18 °C) of the region compared to Sahelian Africa, there is no commensurate depletion in δ¹⁸O compositions of groundwaters of the Ethiopian Plateau. Generally the highland areas north and east of the basin are characterized by relatively depleted δ¹⁸O groundwaters. Altitudinal depletion of δ¹⁸O is 0.1‰/100 m. The meteoric waters of the Blue Nile River basin have higher d-excess compared to the meteoric waters of the Ethiopian Rift and that of its White Nile sister basin which emerges from the equatorial lakes region. The geochemically evolved groundwaters of the YTVL and LTG are relatively isotopically depleted when compared to the present day meteoric waters reflecting recharge under colder climate and their high altitude.     

Isotopic and geochemical identifications of groundwater salinisation processes in Salalah coastal plain,Sultanate of Oman

A detail investigation was carried out to improve the current knowledge of groundwater salinisation processes in coastal aquifers using hydrochemical and isotopic parameters. Data of major ions for 40 wells located in the Salalah plain aquifer, Sultanate of Oman, were collected during pre-monsoon 2004 and analysed. The groundwater changes along the general flow path towards the coast from fresh (EC < 1500 μS/cm), brackish (EC: 1500–3000 μS/cm) and saline (EC > 3000 μS/cm). Results of inverse modeling simulations using PHREEQC show that dissolution of halite may be the main source of Cl and Na in the study area. Ionic delta calculation indicates that the depletion of Na and K and enrichment of Ca and Mg in groundwater were probably attributed to reverse ion exchange reactions. During a sampling campaign conducted in October 2015, 11 groundwater samples were collected for Cl, Br and isotopic analysis (²H/¹⁸O). Molar Cl/Br ratios in fresh groundwater were higher than those of seawater, indicating the impact of halite dissolution on the groundwater quality. For saline groundwater, these ratios were less than those of seawater, showing the influence of anthropogenic input from agriculture on the same. Relatively depleted isotopic signature of all groundwater samples show that the monsoon precipitation is the main source of groundwater recharge in the study area.     

Sulfur cycling at the Mid-Atlantic Ridge: A multiple sulfur isotope approach

The role of sulfur in two hydrothermal vent systems, the Logatchev hydrothermal field at 14°45′N/44°58′W and several different vent sites along the southern Mid-Atlantic Ridge (SMAR) between 4°48′S and 9°33′S and between 12°22′W and 13°12′W, is examined by utilizing multiple sulfur isotope and sulfur concentration data. Isotope compositions for sulfide minerals and vent H₂S from different SMAR sites range from + 1.5 to + 8.9‰ in δ³⁴S and from + 0.001 to + 0.051‰ in Δ³³S. These data indicate mixing of mantle sulfur with sulfur from seawater sulfate. Combined δ³⁴S and Δ³³S systematics reveal that vent sulfide from SMAR is characterized by a sulfur contribution from seawater sulfate between 25 and 33%. This higher contribution, compared with EPR sulfide, indicates increased seawater sulfate reduction at MAR, because of a deeper seated magma chamber and longer fluid upflow path length, and points to fundamental differences with respect to subsurface structures and fluid evolution at slow and fast spreading mid-ocean ridges.Additionally, isotope data uncover non-equilibrium isotopic exchange between dissolved sulfide and sulfate in an anhydrite bearing zone below the vent systems at fluid temperatures between 335 and 400 °C. δ³⁴S values between + 0.2 to + 8.8‰ for dissolved and precipitated sulfide from Logatchev point to the same mixing process between mantle sulfur and sulfur from seawater sulfate as at SMAR. δ³⁴S values between ? 24.5 and + 6.5‰ and Δ³³S values between + 0.001 and + 0.125‰ for sulfide-bearing sediments and mafic/ultramafic host rocks from drill cores taken in the region of Logatchev indicate a clear contribution of biogenic sulfides formed via bacterial sulfate reduction. Basalts and basaltic glass from SMAR sites with Δ³³S = ? 0.008‰ reveal lower Δ³³S lower values than suggested on the basis of previously published isotopic measurements of terrestrial materials.We conclude that the combined use of both δ³⁴S and Δ³³S provides a more detailed picture of the sulfur cycling in hydrothermal systems at the Mid-Atlantic Ridge and uncovers systematic differences to hydrothermal sites at different mid-ocean ridge sites. Multiple sulfur isotope measurements allow identification of incomplete isotope exchange in addition to isotope mixing as a second important factor influencing the isotopic composition of dissolved sulfide during fluid upflow. Furthermore, based on Δ³³S we are able to clearly distinguish biogenic from hydrothermal sulfides in sediments even when δ³⁴S were identical.     

Hydrogeochemical evolution of confined groundwater in northeastern Osaka Basin,Japan: estimation of confined groundwater flux based on a cation exchange mass balance method

A confined aquifer system has developed in argillaceous marine and freshwater sediments of Pliocene–Holocene age in the northeastern Osaka Basin (NEOB) in central Japan. The shallow groundwater (<100 m) in the system is recharged in a northern hilly to mountainous area with dominantly Ca-HCO₃ type water, which changes as it flows toward the SW to Mg-HCO₃ type and then to Na-HCO₃ type water. Comparison of the chemical and Sr isotopic compositions of the groundwater with those of the bulk and exchangeable components of the underground sediments indicates that elements leached from the sediments contribute negligibly to the NEOB aquifer system. Moreover, model calculations show that contributions of paleo-seawater in the deep horizon and of river water at the surface are not major factors of chemical change of the groundwater. Instead, the zonal pattern of the HCO₃-dominant groundwater is caused by the loss of Ca²⁺ from the water as it is exchanged for Mg²⁺ in clays, followed by loss of Mg + Ca as they are exchanged for Na + K in clays between the Ca-HCO₃ type recharge water and the exchangeable cations in the clay layers, which were initially enriched in Na⁺. Part of this process was reproduced in a chromatographic experiment in which Na type water with high ⁸⁷Sr/⁸⁶Sr was obtained from Mg type water with low ⁸⁷Sr/⁸⁶Sr by passing it through marine clay packed in a column. The flux of recharge water into the confined aquifer system according to this chromatographic model is estimated to be 0.99 mm/day, which is compatible with the average recharge flux to unconfined groundwater in Japan (1 mm/day).     

Geochemistry,radiocarbon ages,and paleorecharge conditions along a transect in the central High Plains aquifer,southwestern Kansas,USA

Water samples from short-screen monitoring wells installed along a 90-km transect in southwestern Kansas were analyzed for major ions, trace elements, isotopes (H, B, C, N, O, S, Sr), and dissolved gases (He, Ne, N₂, Ar, O₂, CH₄) to evaluate the geochemistry, radiocarbon ages, and paleorecharge conditions in the unconfined central High Plains aquifer. The primary reactions controlling water chemistry were dedolomitization, cation exchange, feldspar weathering, and O₂ reduction and denitrification. Radiocarbon ages adjusted for C mass transfers ranged from <2.6 ka (¹⁴C) B.P. near the water table to 12.8 ± 0.9 ka (¹⁴C) B.P. at the base of the aquifer, indicating the unconfined central High Plains aquifer contained a stratified sequence of ground water spanning Holocene time. A cross-sectional model of steady-state ground-water flow, calibrated using radiocarbon ages, is consistent with recharge rates ranging from 0.8 mm/a in areas overlain by loess to 8 mm/a in areas overlain by dune sand. Paleorecharge temperatures ranged from an average of 15.2 ± 0.7 °C for the most recently recharged waters to 11.6 ± 0.4 °C for the oldest waters. The temperature difference between Early and Late Holocene recharge was estimated to be 2.4 ± 0.7 °C, after taking into account variable recharge elevations. Nitrogen isotope data indicate NO₃ in paleorecharge (average concentration=193 μM) was derived from a relatively uniform source such as soil N, whereas NO₃ in recent recharge (average concentration=885 μM) contained N from varying proportions of fertilizer, manure, and soil N. Deep water samples contained components of N₂ derived from atmospheric, denitrification, and deep natural gas sources. Denitrification rates in the aquifer were slow (5 ± 2× 10⁻³ μmol N L⁻¹ a⁻¹), indicating this process would require >10 ka to reduce the average NO₃ concentration in recent recharge to the Holocene background concentration.