基于iSIGHT重于水的无人自治潜水器概念设计及优化方法

介绍一种新型重于水的无人自治潜水器的概念设计及主艇体优化方法,阐述了主艇体、机翼、尾翼等设计原理。以飞鱼Ⅱ设计过程为例,详细描述了重于水的无人自治潜水器概念设计流程,并通过iSIGHT优化设计软件对主艇体的设计参数进行优化。优化结果表明,优化后主艇体重量能够减小48%,阻力减小2.9%。     

超大型海洋浮式结构物概念设计的关键技术问题

应用超大型海洋浮式结构物进行海洋空间利用和海洋资源开发，是目前海洋工程界的研究热点。概念设计是超大型海洋浮式结构物研究的基础。本文从设计准则、结构型式、建造材料、模块连接器、系泊系统等几个方面对概念设计的关键技术问题作了归纳，对超大型海洋浮式结构物的概念设计有一定的参考价值。     

渤海油田的开发与5000t原油船的设计论证

本文简要地介绍了渤海油田的开发现状和环境条件的特点，详细地论述了５０００ｔ原油船概念设计中所做的工作，以及在型线设计、总体布置、船体结构、舾装和机电设备等诸方面所取得的结果。     

无人艇载水陆一体化测量系统集成优化技术

为提高水陆一体化测量系统的作业精度和性能,开展无人艇载水陆一体化测量系统集成优化技术研究。借助仿真分析手段,对艇型及设备布置进行优化研究,并开展多传感器集成、时间同步、盲区无缝和实时拼接技术研究,设计并集成了无人艇载水陆一体化测量系统。实验表明,无人艇载水陆一体化测量系统获得的水上水下数据的平均垂直误差为0.12m。所提出的无人艇载水陆一体化测量系统集成优化技术是可行的,可为测绘艇和水陆一体化测量系统集成提供理论依据。     

移动式海上基地连接器研究现状与发展

移动式海上基础（MOB）由一些装有自推进装置的半潜式模块相连组成，能为货运机以及直升机提供起降、导航、维护和军需品供给。MOB的概念设计中存在一些关键技术问题有待研究。连接系统的设计就是其中之一。本文介绍了5种MOB的概念设计，并以McDemott MOB连接器为例，介绍了连接器设计准则的发展以及相应连接器设计的改进，列举了一些连接器载荷的计算方法。     

无人水面测量艇技术研究(一):船型及推进方式设计

目前,无人水面舰船代表了海洋测量装备自动化、智能化的发展趋势,是海洋测量技术研究的热点。针对浅水区域水下地形复杂、暗礁众多、涌浪较大的特点,对无人水面测量艇水深测量技术进行研究,涉及的关键技术包括船型及推进方式设计、测量设备加装测试、无线数据传输功能、测量艇吊放回收技术等,本文主要围绕船型及推进方式展开研究,提出三体喷水推进无人水面测量艇设计方案,基于该方案实现的测量模式具有很强的机动性和高效性,必将极大地提高测量部门在浅水区域水深数据的快速获取能力。     

深潜器设计特征分析

从1948年法国设计FNRS-2号第一艘深潜器以来,特别是六十年代开始,由于海洋开发和军事上的需要,对深潜器(又称可潜器)给予了广泛重视。目前,深潜器已成为海洋调查、海底打捞、深海救生、海洋研究以及建造各种水下工程的重要手段。美国1970年下水的深潜救生艇(DSRV)全部采用计算机程序控制。可以在1524米水深援救失事海艇艇员,每次24人,化费研制费高达二亿多美元。三艘“南鱼座”号深潜器,在一年内把沉没在深750米海底的120条鱼雷打捞起来。深潜工作艇“阿尔文”号和“CURV”号把失落在深856米海底的一颗氢弹打捞起来。著名深潜器“阿鲁明纳”号和打捞船“密执尔”号合作打捞了沉没在深1538米的另一艘深潜器“阿尔文”号。     

深海立柱式平台概念设计研究

以上海交通大学海洋工程国家重点实验室提出的多柱桁架式立柱平台(Cell-Truss Spar)概念为例,对Spar平台的概念设计方法和过程进行了初步的研究,并对其水动力性能进行理论和数值计算,分析一些影响Spar平台运动性能的参数。设计涉及到两方面的问题:一是设计方法、流程以及结构物的形式;二是水动力性能。整个设计流程是一个不断循环的交互式的过程,需要考虑很多方面因素的影响。     

一种无人艇自适应无线通信系统的设计应用

随着无人艇技术的发展成熟,各型无人艇已逐步应用到民用和军用领域。无线通信系统作为无人艇的重要组成部分,承担着无人艇与母艇之间信息交互的功能。从无线通信技术的发展现状出发,分析出适用于无人艇应用场景的无线通信技术及工程设计方法,并设计了一种自适应无线通信系统。该系统能根据无人艇工作状态提供连续稳定的数据链,经试验测试,运行效果良好。     

面向体系作战的水下无人攻防装备发展构想

着眼于我国海军战略转型时期水下作战能力不足的问题及水下无人装备体系化发展需求,分析了美国水下无人装备发展特点。按照装备体系设计方法,从作战任务、能力需求、能力差距、装备需求等方面进行分析研究,提出了一种由“近海、中远海、舰/艇载”等几类装备构成的水下无人攻防装备体系构想。     

玻璃钢渔船船体材料切片之灼烧试验研究

玻璃钢渔船有很多优异的性能，因而有逐渐取代本质渔船的趋势，为推进玻璃钢渔船的产业化进程，作者查痒了大量国内外有关资料，并进行了玻璃钢渔船船体材料切片的灼烧试验，最终提出了我国玻璃钢渔船船体材料切片的灼烧试验的试验规程，以供我国今后制定玻璃钢渔船材料试验标准作参考。     

Development of BOATDSS high speed boat design database

Yachts and recreational boats have been growing in popularity throughout the world. In the United States alone they have a 2% annual growth rate. This growth has created the market for new boats built with improved hull materials and new hull forms, propulsion motors and fabrication techniques. With this growth in boat designs and technology developments, it is useful to examine the current trends in pleasure boat design. This paper addresses the development and utilization of a relational pleasure boat database BOATDSS–Boat Decision Support System. The BOATDSS database contains the data on 850 boat designs. The Decision Support System portion of the BOATDSS is organized to use this data for decision support such as a buyer shopping or a builder examining the potential of a new boat entering the present boat market. Several results from BOATDSS are presented to illustrate its use during the conception and preliminary design of recreational boats.     

中日两国渔船的性能和发展情况的比较研究

本文是在对两国渔业发展情况调查研究的基础上,对比了两国渔船在性能方面的差异,分析了日本渔船的发展趋势,提出了中国渔船近期发展的方向。日本渔船改为节能型后,两国渔船的船型相近,其稳定与适航性指标亦相差不大。日本渔船的装备优于中国的渔船,平均单船功率为46．5kW／艘,中国的平均单船功率为23．03kw／艘。日本渔船的助渔设备、机电设备、制冷设备均较先进,主机推进系统多采用可变螺距螺旋浆或多级减速,中国渔船的推进方式多为定距浆,现在正推广多级减速装置。日本渔船业的发展趋势为：控制规模,提高性能,确保安全,改善适居性。我国渔船的发展方向是：减少渔船的数量,适度发展外海和远洋作业渔船,改善渔船装备,改造小型渔船,大力发展FRP渔船。     

广东海域模拟人和无动力渔船海上漂移试验研究

为探讨海上搜救目标无动力渔船和落水人员在海水中的漂移规律,对现有海上搜救目标漂移轨迹预测模型进行评估与改进,国家海洋局南海海洋工程勘察中心于2011年2月和4月在广东近岸海域开展了3组模拟人和2组无动力船海上漂移试验。试验发现模拟人与无动力船大部分时刻的漂移轨迹位于下风向的右侧,80%以上的时刻漂移轨迹位于海流流向和下风向的矢量合成区间内。以漂移速度为应变量,流速和风速为自变量进行二元回归分析发现,广东海域的模拟人和无动力渔船的流致漂移参数约为1.0,风致漂移参数分别为0.019和0.038。     

玻璃钢渔船船体材料切片之弯曲试验研究

玻璃钢渔船有很多优异的性能，因而有逐渐取代木质渔船的趋势。为推进玻璃钢渔船的产业化进程，作者在查阅了大量国内外有关资料的基础上，进行了玻璃钢渔船体材料切片的弯曲试验，最终提出了我国玻璃钢渔船船体材料切片的弯曲试验规程，以供我国今后制定玻璃钢渔船材料试验标准作参考。     

20马力玻璃钢渔船的总体设计

作者为开发新型渔船并改善其性能和节约木材,设计了20马力玻璃钢渔船。船体总长Loa=13.65米,船宽B=3.40米,型深D=1.15米,平均吃水T_m=0.82米,航速V=6.5节,满载排水量为17.19吨,自持力为10天。全船采用玻璃钢材料,并设计成折角线形横剖面、延伸甲板和收缩形舭龙骨。本船稳性满足规范要求。横摇性能及适航性能良好。     

Recreational boat noise level evaluation

Recreational boats are constantly undergoing modifications and improvements in design, construction materials, and equipment. The boat builder mission is supply customers with a product with better quality, safety and onboard comfort. Onboard comfort should be evaluated along several points. Seakeeping is especially critical on long trips or operations in regions where harsh sea conditions occur. Over the years much attention has been given to boat behavior underway at sea. Recently onboard noise level has become a significant element of comfort and navigation safety. With high onboard noise a boater is unable to detect other boat whistles, horns and calls for help. This becomes a critical problem when sailing in fog and at night. Maintaining the internal noise level within limits is important. In order to address this noise problem, the paper presents a review of existing guidelines and the authors' proposal for Boat Noise Evaluation (BNE) procedure for recreational powerboats. This procedure has been used in a number of boat trials. The use of this procedure is discussed along with representative boat noise level results and a comparison with the acceptable values for passenger comfort and safety.     

Maritime safety for fishing boat operations and avoidable hijacking in Taiwan

Taiwanese fishing boats have been hijacked many times this year. Trouble at sea can usually be attributed to communication problems, inappropriate management and an unfair salary system. The majority of boats hijacked are high sea (long-line) fishing boats. Although fishery authorities ask the fishing boats to set up vessel monitoring systems (VMSs), this precaution has not been sufficient. There is a further need for improved management by the fishing boat owner and for an improved employment policy for seamen. The issue of maritime security is not new, but it remains a major concern and continues to be a threat to Taiwan and other countries. To date, there have been many cases of hijacking in the South China Sea. This paper analyzes the reasons for the hijackings and provides potential strategies to prevent future incidents.     

An operational satellite remote sensing system for ocean fishery

Ocean environmental information is very important to supporting the fishermen in fishing and satellite remote sensing technology can provide it in large scale and in near real-time. Ocean fishery locations are always far away beyond the coverage of the satellite data received by a land-based satellite receiving station. A nice idea is to install the satellite ground station on a fishing boat. When the boat moves to a fishery location, the station can receive the satellite data to cover the fishery areas. One satellite remote sensing system was once installed in a fishing boat and served fishing in the North Pacific fishery areas when the boat stayed there. The system can provide some oceanic environmental charts such as sea surface temperature (SST) and relevant derived products which are in most popular use in fishery industry. The accuracy of SST is the most important and affects the performance of the operational system, which is found to be dissatisfactory. Many factors affect the accuracy of SST and it is difficult to increase the accuracy by SST retrieval algorithms and clouds detection technology. A new technology of temperature error control is developed to detect the abnormity of satellite-measured SST. The performance of the technology is evaluated to change the temperature bias from-3.04 to 0.05 ℃ and the root mean square (RMS) from 5.71 to 1.75 ℃. It is suitable for employing in an operational satellite-measured SST system and improves the performance of the system in fishery applications. The system has been running for 3 a and proved to be very useful in fishing. It can help to locate the candidates of the fishery areas and monitor the typhoon which is very dangerous to the safety of fishing boats.     

Commercial landings of the spiny lobster Jasus edwardsii (Hutton) at Chatham Islands,New Zealand (Crustacea: Decapoda: Palinuridae)

The spiny lobster Jasus edwardsii (Hutton) supports a thriving new fishery at the Chatham Islands, about 770 km east of New Zealand. Commercial fishing for J. edwardsii started in November 1965, and within 2 years the area became a major centre of New Zealand's large spiny lobster fishery, which earned >NZ$5,000,000 in 1967. Over 12 months (September 1966 to August 1967) landings at the Chatham Islands made up 39.8% of the total New Zealand spiny lobster catch of 16,600,0001b.

In the first year of fishing 2,177,923 lb of spiny lobsters were caught, and in the second 7,129,658lb—a 227% increase. Fishing effort also increased substantially: average number of boats fishing each month rose by 174% in the second year, and the total number of boat‐fishing days by 152%. Most specimens of J. edwardsii caught are large and mature, typical of a virgin stock.