软黏土卸荷变形特性室内试验研究与数值模拟

利用在常规三轴仪的基础上改制而成的应力控制式三轴仪进行了加(卸)荷作用下软黏土变形特性的室内试验研究,得到了以下的结论:(1)在加荷载和卸荷载大小相同的情况下,卸荷过程中的变形量比加载过程中的变形量小,约为加载过程中的变形量的十分之一;(2)当卸荷比例比较小时,试样的回弹变形量非常小;(3)当卸荷比例达到某一定值以后,...     

剪切-体积应变耦合的孔压增量模型试验

以南京细砂为对象,通过共振柱试验及应变控制的排水/不排水分级和单级加载循环三轴试验的系统性研究,建立了能够描述饱和砂土孔压增长规律的新模型。该模型遵循Martin和Byrne提出的基本理论框架,孔压的增长是由循环剪切作用下体积改变所引起的。提出的孔压模型属于应变控制的孔压增量模型。基于排水循环单级加载试验,通过引入体积门槛剪应变γ_(tv)的概念,以具有代表性的15周体应变(ξ_(vd))15为基准点,归准化体应变发展与循环剪应变之间的关系,建立了三参数的体应变增量模型及其参数标定方法。基于排水和不排水循环单级加载试验结果,揭示了体应变与孔压比之间的内在联系,进而导出回弹模量表达式。通过耦合新的体应变增量模型及回弹模量公式,建立了新的剪应变-体应变耦合的孔压增量模型。验证性试验表明,新的孔压增量模型的预测值与试验结果的吻合度较高。     

新型卧式土工平面应变仪研制

平面应变仪是一种开发较早但至今尚不完善的一种土工试验仪器,随着国家基础设施建设的发展,平面应变试验及试验方法在许多领域得以应用,显示出了平面应变试验在工程设计和研究中的重要性。通过回顾国内外平面应变仪的发展,提出了开发一种新型的土工平面应变三轴仪的思路,以实现更科学、更精确地进行复杂应力加载条件下土平面应变试验的研究。以此为目的,从压力室结构、加载系统及控制量测系统等方面提出了相应的改善措施,开发了一种新型的土工平面三轴仪。并通过重塑黄土的平面应变试验及改进的真三轴仪平面应变试验对比、以及平面应变试验强度参数与常规三轴试验强度参数对比分析,验证了所研制的新型卧式土工平面应变仪的合理性和研制思路的正确性。最后,通过对该平面应变仪应变试验的黄土破坏特性与改进真三轴平面应变试验的黄土破坏特征的对比分析,验证了本文所开发的平面应变仪在描述土体应变局部化问题的合理性。     

粘土的粘塑性特性试验与三要素本构模型

研究了3种粘土的未扰动试样和重塑试样在三轴排水固结试验条件下的粘塑性。在试验过程中,利用计算机控制应变控制式三轴仪的加载速度,实现了在不同加载阶段的不同恒应变率加载。依据应力对应变率改变的响应程度对粘土的粘塑性进行了评价。实验结果表明,粘土的粘塑性表现为等时特性,并且经过一定时间的蠕变后,粘土强度会有较大地提高。并指出粘土的粘塑性应力-应变特性可以较好地采用非线性三要素模型对它进行描述。     

深圳地区原状花岗岩残积土硬化土模型参数的试验研究

硬化土（hardening soil）模型是岩土工程数值分析中常采用的模型。为研究加载方式和排水条件对原状花岗岩残积土剪切行为的影响,对深圳地区原状花岗岩残积土进行了常规三轴固结排水、常规三轴固结不排水、固结排水侧向卸载和固结不排水侧向卸载4组试验,并由试验结果确定出不同加载方式和排水条件下的硬化土模型参数。结果表明：在常规三轴试验中,试样在剪切过程中表现为先剪缩后剪胀的特性,在侧向卸载试验中,试样始终表现为剪胀的特性;模型参数值与加载路径密切相关,固结不排水侧向卸载试验（CDLU）测得的有效内摩擦角 较常规三轴固结不排水试验（CD）试验大20%,而有效黏聚力 小了46%;CDLU试验得到的三轴压缩试验的参考割线模量 为CD试验的2.9倍,卸载再加载参考割线模量 为CD试验的1.8倍;在相同加载路径下,模型参数值也受排水条件的影响,由CU试验得到的 与CD试验的结果相近,但CU试验得到的 要明显大于CD试验的结果,CU试验得到的 为CD试验的2倍, 为CD试验的3.8倍。因此,在岩土工程数值分析中应根据工程的实际情况确定和选用模型参数值。     

应力状态对粗粒料力学特性影响的大型真三轴试验

土石坝所处的应力状态较接近平面应变应力状态或三维应力状态,而常规三轴试验低估了粗粒料的力学性能。应用大型真三轴仪对常规三轴应力状态、平面应变应力状态和真三轴应力状态（ 0.25, 为中主应力系数, 、 、 分别为大、中、小主应力）下粗粒料的力学特性进行了压缩试验研究。试验结果表明：相同小主应力下,常规三轴试验、平面应变试验、真三轴试验的大、小主应力之差与大主应力方向应变的关系曲线依次变高变陡。某一试验加载条件下,体应变随球应力的增大而增大,初始剪切阶段增加较慢,随后呈线性增大,不同小主应力的体应变曲线较为接近。平面应变试验强度和真三轴试验强度比常规三轴试验强度有较大增长,真三轴试验强度增加百分比大于平面应变试验强度增加百分比。初始弹性模量随小主应力的增大呈线性增大。平面应变状态下中主应力系数随大主应力方向应变的增大而增大,初始剪切阶段增长较缓,之后近似呈线性增大。相同小主应力下,从常规三轴应力状态至平面应变应力状态再到真三轴应力状态,小主应力方向应变均为膨胀变形,且膨胀变形依次增大。同一试验加载条件下,小主应力较小时,应力比（偏应力与球应力之比）与偏应变的关系曲线位于上方。     

温控桩-土接触面三轴试验系统研制与验证

为探讨温度对桩?土接触面力学性质的影响,自主研制了一套温控桩?土接触面三轴试验仪。基于常规土工三轴仪压力腔,搭建桩?土接触面构件,分别增设桩体和土体温度控制系统,实现非等温条件下桩?土接触面热力耦合特性测试。开展了不同类型、温度荷载等级下桩?砂土接触面热?力耦合特性三轴试验,实测了桩体与土体温度控制精度、桩?土接触面剪切应力、不排水条件下的孔隙水压力以及排水条件下的体积变化等规律,初步验证了试验系统的可靠性和准确性。该试验系统结构简单、拆装方便,可实现温控桩?土接触面三轴试验与常规/温控三轴试验的自由切换。相关研究成果将为桩?土接触面热?力耦合机制与本构模型的建立提供技术支撑。     

常规三轴试验测定土的残余强度

利用常规三轴仪测定土的残余强度的方法进行了试验研究,并对其误差进行了分析。认为：如果能够准确控制轴向荷重,对超固结土可在常规三轴仪中测定出残余强度。尤其对已具裂隙面的土样,其与重复剪结果极为接近。     

应力路径对软土应力-应变特性影响试验研究

采用应力-应变控制式三轴仪对福州市区某基坑影响范围内典型饱和软土进行了一系列应力路径试验,以研究受基坑开挖和支护结构作用影响的土体卸、加载应力-应变特征。对室内正常固结和相同围压K0固结的试样剪切试验结果进行了比较,表明二者在变形和强度上均存在较大差异。基于K0固结剪切试验结果,求出了邓肯-张模型参数,提出了该模型各参数的验证方法。同时,与室内正常固结试验确定的模型参数进行了对比,说明部分参数之间存在着较大差异,也决定了二者应力-应变关系上的差异,建议以K0固结试样进行三轴加、卸载试验确定邓肯-张模型参数,以满足该模型在基坑工程数值模拟分析中的需要。试验得到的典型软土的邓肯-张模型参数,可供福州市区或相似地层条件下基坑工程数值模拟时参考     

变轴压加载煤体变形破坏及瓦斯渗流试验研究

为探究煤岩在变轴压加载下的变形破坏和瓦斯渗流演化规律,以原煤煤粉压制的煤体试件为研究对象,采用含瓦斯煤热流固耦合三轴伺服渗流试验系统,进行了5种不同轴压加载路径下的煤体三轴压缩及瓦斯渗流试验。研究结果表明,煤体变形可分为压密、稳定发展、非稳定破裂发展和破裂后4个阶段;压密阶段试件的应变变化速率主要与张开性结构面和裂隙有关,与轴压加载区间无关,稳定发展阶段虽然轴压加载速率不同,但在相同的轴压加载区间,轴向应变变化速率基本相同;变轴压加载前期煤体渗透率与轴压的加载速率呈负相关变化,中后期渗透率变化速率与轴压加载速率相关性不大。研究结论对指导冲击地压以及煤与瓦斯突出的监测预警有着重要意义。     

The terrestrial fauna of the Late Triassic Pant-y-ffynnon Quarry fissures,South Wales,UK and a new species of Clevosaurus (Lepidosauria: Rhynchocephalia)

Pant-y-ffynnon Quarry in South Wales yielded a rich cache of fossils in the early 1950s, including articulated specimens of new species (the small sauropodomorph dinosaur Pantydraco caducus and the crocodylomorph Terrestrisuchus gracilis), but no substantial study of the wider fauna of the Pant-y-ffynnon fissure systems has been published. Here, our overview of existing specimens, a few described but mostly undescribed, as well as freshly processed material, provides a comprehensive picture of the Pant-y-ffynnon palaeo-island of the Late Triassic. This was an island with a relatively impoverished fauna dominated by small clevosaurs (rhynchocephalians), including a new species, Clevosaurus cambrica, described here from a partially articulated specimen and isolated bones. The new species has a dental morphology that is intermediate between the Late Triassic Clevosaurus hudsoni, from Cromhall Quarry to the east, and the younger C. convallis from Pant Quarry to the west, suggesting adaptive radiation of clevosaurs in the palaeo-archipelago. The larger reptiles on the palaeo-island do not exceed 1.5?m in length, including a small carnivorous crocodylomorph, Terrestrisuchus, and a possible example of insular dwarfism in the basal dinosaur Pantydraco.     

Définition d'une limite multicritère ; stratigraphie du passage Campanien–Maastrichtien du site géologique de Tercis (Landes,SW France)Definition of a multi-criteria boundary; stratigraphy of the Campanian–Maastrichtian interval of the geological site at Tercis (Landes,SW France)

Lithostratigraphy, physicochemical stratigraphy, biostratigraphy, and geochronology of the 77–70 Ma old series bracketing the Campanian–Maastrichtian boundary have been investigated by 70 experts. For the first time, direct relationships between macro- and microfossils have been established, as well as direct and indirect relationships between chemo-physical and biostratigraphical tools. A combination of criteria for selecting the boundary level, duration estimates, uncertainties on durations and on the location of biohorizons have been considered; new chronostratigraphic units are proposed. The geological site at Tercis is accepted by the Commission on Stratigraphy as the international reference for the stratigraphy of the studied interval. To cite this article: G.S. Odin, C. R. Geoscience 334 (2002) 409–414.     

The effect of water on accessory phase solubility in subaluminous and peralkaline granitic melts

The solubilities of columbite, tantalite, wolframite, rutile, zircon and hafnon were determined as a function of the water contents in peralkaline and subaluminous granite melts. All experiments were conducted at 1035 °C and 2 kbar and the water contents of the melts ranged from nominally dry to approximately 6 wt.% H₂O. Accessory phase solubilities are not affected by the water content of the peralkaline melt. By contrast, solubilities are affected by the water content of the subaluminous melt, where the solubilities of all the accessory phases examined increase with the water content of the melt, up to 2 wt.% H₂O. At higher water contents, solubilities are nearly constant. It can be concluded that water is not an important control of accessory phase solubility, although the water content will affect diffusivities of components in the melt, thus whether or not accessory phases will be present as restite material. The solubility behaviour in the subaluminous and peralkaline melts supports previous spectroscopic studies, which have observed differences in the coordination of high field strength elements in dry vs. wet subaluminous granitic glasses, but not for peralkaline granitic glasses. Lastly, the fact that wolframite solubility increases with increasing water content in the subaluminous melt suggests that tungsten dissolved as a hexavalent species.     

Late Wuchiapingian (Late Dzhulfian,early Late Permian) limestone olistolites within the Tertiary flysch of Glypia Unit (Mount Parnon,central–eastern Peloponnesus,Greece)

Some olistolites reworked in a Tertiary flysch of Mount Parnon (Peloponnesus, Greece) exhibit a Late Permian assemblage, dominated by Paradunbarula (Shindella) shindensis, Hemigordiopsis cf. luquensis and Colaniella aff. minima. This association corresponds to the Late Wuchiapingian (=Late Dzhulfian), a substage whose algae and foraminifera are generally little known. Contemporaneous limestones crop out in the middle part of the Episkopi Formation in Hydra, but they are rather commonly reworked in Mesozoic and Cainozoic sequences. The palaeobiogeographical affinities shared by the foraminiferal markers of Greece, southeastern Pamir, and southern China, are very strong (up to the specific level), and are congruent with the Pangea B reconstructions. To cite this article: E. Skourtsos et al., C. R. Geoscience 334 (2002) 925–931.     

PALEONTOLOGY

正20141596 Liu Yunhuan(School of Earth Sciences and Resources,Chang’an University,Xi’an 710054,China);Shao Tiequan Early Cambrian Quadrapyrgites Fossils of Xixiang Boita in Southern Shaanxi Province(Journal of Earth Sciences and Environment,ISSN1672-6561,CN61-1423/P,35(3),2013,p.39-43,3 illus.,20 refs.)     

GEOCHEMICAL EXPLORATION

正20141719 Chen Zhijun(State Key Laboratory of Geological Processes and Mineral Resources,China University of Geosciences,Wuhan 430074,China);Chen Jianguo Automated Batch Mapping Solution for Serial Maps:A Case Study of Exploration Geochemistry Maps(Journal of Geology,ISSN1674-3636,CN32-1796/P,37(3),2013,p.456-464,2 illus.,2 tables,10 refs.)     

MICROPALAEONTOLOGY

正20140962 Chen Fenning(Xi’an Institute of Geology and Mineral Resources,Xi’an710054,China);Chen Ruiming Late Miocene-Early Pleistocene Ostracoda Fauna of Gyirong Basin,Southern Tibet(Acta Geologica Sinica,ISSN0001-5717,CN11-1951/P,87(6),2013,p.872-886,6illus.,56refs.)     

PETROLOGY

正1.IGNEOUS PETROLOGY20142008Cai Jinhui(Wuhan Center,China Geological Survey,Wuhan 430205,China);Liu Wei Zircon U-Pb Geochronology and Mineralization Significance of Granodiorites from Fuzichong Pb-Zn Deposit,Guangxi,South China(Geology and Mineral Resources of South China,ISSN1007-3701,CN42-1417/P,29(4),2013,p.271-281,7illus.,     

ENVIRONMENTAL GEOLOGY

正20141205Cheng Weiming(State Key Laboratory of Resources and Environmental Information System,Institute of Geographic Sciences and Natural Resources Research,CAS,Beijing 100101,China);Xia Yao Regional Hazard Assessment of Disaster Environment for Debris Flows:Taking Jundu Mountain,Beijing as an     

PROSPECTING EXPLORATION

正20141266Fan Chaoyan(Guangdong Provincial Key Laboratory of Mineral Resources and Geological Processes,Guangzhou 510275,China);Wang Zhenghai On Error Analysis and Correction Method of Measured Strata Section with Wire Projection Method(Journal of