滑动窗口混合加权法磁异常保真去噪研究

实测磁异常通常含有明显的噪声干扰,常用的滑动窗口平均滤波法虽然有明显的去噪效果,但对有意义的异常信号也会造成明显的幅值和宽度上的失真.S-G平滑滤波法具有异常形态保真的优点,但在平稳区的去噪效果欠佳.本文提出异常评价识别具体方法,并据此将平均法与S-G法动态加权融合,从而实现了既能对异常区进行信号的保护,又能在全区达到有效去噪的目的,为磁异常的有效去噪形成简单而有效的方法.     

Statistical analysis of non-stationary voltage recordings in geoelectrical prospecting1

We study the geoelectrical problem of picking out the useful signal from voltage time series, monitored under conditions of a low signal-to-noise ratio and non-stationary noise. Statistical tests performed at different sites show that geoelectrical noise often belongs to the class of non-stationary phenomena with non-Gaussian probability distributions. In such cases, the application of conventional methods of geoelectrical useful signal extraction, based on the stationary white-noise assumption, gives biased estimates. For the on-line processing of geoelectrical recordings, we recommend the use of the periodogram technique combined with the Kolmogorov–Smirnov test, a suitable algorithm of which is described in detail. The suggested procedure allows data acquisition to stop as soon as the useful signal power is estimated with a relative error smaller than a predetermined value. Finally, we compare the suggested procedure with the autoregressive approach. The previously used and simpler periodogram method, applied to the solution of problems of this kind, appears to give better performances than the autoregressive analysis.     

Weak Seismic Signal Extraction Based on the Curvelet Transform

Seismic signal denoising is a key step in seismic data processing. Airgun signals are easy to be interfered with by noise when it travels a long distance due to the weak energy of active source signal of the airgun. Aiming to solve this problem, and considering that the conventional Curvelet transform threshold processing method does not use the seismic spectrum information, we independently process the Curvelet scale layer corresponding to valid data based on the characteristics of the Curvelet transform of multi-scale, multi-direction and capable of expressing the sparse seismic signals in order to fully excavate the information features. Combined with the Curvelet adaptive threshold denoising the algorithm, we apply the Curvelet transform to denoising seismic signals while retaining the weak information in the signal as much as possible. The simulation experiments show that the improved threshold denoising method based on Curvelet transform is superior to the frequency domain filtering, wavelet denoising and traditional Curvelet denoising method in detailed information extraction and signal denoising of low SNR signals. The calculation accuracy of the relative wave velocity variation of underground medium is improved.     

多小波方法及其在深地震测深数据去噪中的应用

在宽角反射/折射地震测深数据处理中,仍多用基于傅里叶变换的滤波方法和小波去噪方法。鉴于傅里叶方法对稳态信号很有效但对非稳态的地震信号效果不佳的状况以及小波不能同时具有正交性、紧支性、对称性,本文给出了基于多小波的去噪方法,多小波具有正交性、对称性、紧支性,克服了传统小波的缺陷。编写了多小波去噪方法的人机交互软件。该软件可以方便快捷地显示宽角反射/折射地震记录截面,进行多小波域的阈值去噪。实例计算结果表明,本文所述方法和编写的软件有效且可行。     

How to Remedy Non-optimal Seismic Data by Seismic Processing

—Seismic data processing mostly takes into account the statistics inherent in the data to improve the data quality. Since some years the deterministic approach for processing shows many advantages. This approach takes into account e.g., the source signature, with the knowledge of its amplitude and phase behavior. The transformation of the signal into an optimized form is called wavelet processing. By this step an optimal input for deconvolution can be produced, which needs a minimum- delay signal to function well. The interpreter needs a signal which gives the optimum resolution, which is accomplished by the zero-phase transformation of the input signal. The combination of different input sources such as Vibroseis and Dynamite requires a phase adoption. All these procedures can be implemented via Two-Sided-Recursive (TSR-) filters. Spectral balancing can be accomplished very effectively in time domain after a minimum delay transform of the input signals. The DEKORP data suffer from a low signal/noise ratio, so that special methods for the suppression of coherent noise trains were developed. This can be done by subtractive coherency filtering. Multiple seismic reflections also can be suppressed by this method very effectively. All processing procedures developed during recent years are now fully integrated in commercial software operated by the processing center in Clausthal.     

基于方向可控滤波的地震勘探随机噪声压制

针对地震勘探随机噪声的压制,本文应用拉伸厄米特高斯函数设计出方向可控滤波器.根据时空域上随机噪声的无方向性与有效信号的有向性的区别,通过局部数字特征,对数据进行选择后重组信号.方向选择性的增加,使得滤波过程能与不同方向的轴进行匹配,噪声被压制的同时保持信号的幅度;方向可调性,使得计算效率提高,且所需存储空间减少.仿真实验表明,采用此方法,信号保幅性和去噪效果均比传统的小波算法以及Curvelet变换好,在-5db信噪比下,本文方法保幅度为92.99%,信噪比提升221.774%,在实际地震信号处理中有明显的抑制噪声、保持有用信号的效果.     

基于f-x域流式预测滤波器的地震随机噪声衰减方法

随机噪声的影响在地震勘探中是不可避免的,常规的随机噪声压制方法在处理中往往会破坏具有时空变化特征的非平稳有效地震信号,影响地震数据的准确成像.当前油气勘探的目标已经转变为“两宽一高”,随着数据量的增大,对去噪方法的处理效率也提出了更高的要求.因此,开发高效的非平稳地震数据随机噪声压制方法具有重要意义.预测滤波技术广泛用于地震随机噪声的衰减,本文基于流式处理框架提出一种新的f-x域流式预测滤波方法,通过在频率域建立预测自回归方程,运用直接复数矩阵逆运算代替迭代算法求解非平稳滤波器系数,实现时空变地震同相轴预测,提高自适应预测滤波的计算效率.通过与工业标准的FXDECON方法和f-x域正则化非平稳自回归(RNA)方法进行对比,理论模型和实际数据的测试结果表明,提出的f-x域流式预测滤波方法能更好地平衡时空变有效信号保护、随机噪声压制和高效计算三者之间的关系,获得合理的处理效果.     

基于混合时频分析技术的地震数据噪声压制(英文)

针对复杂地质结构、陡倾角相干噪声、空间采样不均匀等情况下F-x域反褶积去噪技术的不足,提出首先应用具有时-频聚集性度量准则的广义S变换将时间-空间域的地震数据变换至时间-频率-空间域(t-f-x)的数据,在t-f-x域中对每一个频率切片应用经验模态分解(EMD),移除噪声占主导地位的本征模态函数以压制相干和随机噪声的滤波方法。模型分析表明第一本征模态函数表征的高频信息以噪声为主,移除第一本证模态函数可以达到压制噪声的目的。经广义S变换后形成t-f-x域中EMD滤波方法等效于具有依赖于空间位置、频率、高波数截断特征的自适应f-k滤波。此滤波方法考虑了数据的局部时-频特征,且具有执行简单的特点。与AR预测滤波方法比较,此法滤除的成分包含较少的低波数的信息,滤除的成分非常的局部化,且获得结果没有表现出过度平滑的特征。实际资料的应用表明在经广义S变换后形成t-f-x域中运用EMD滤波方法能够有效地压制随机和陡倾角相干噪声。     

GHM类正交多小波变换及其在地震资料去噪中的应用

多小波是对小波理论的一个新发展,它可以同时满足正交性、对称性、短支撑等良好的特性要求。文中介绍了多小波基本理论、多小波变换具体过程及预处理方法,提出了基于GHM类多小波变换的地震资料软阈值去噪方法,通过对合成数据和实际资料进行处理分析,表明多小波变换在有效压制随机噪声的同时,能较好地保留原信号的特征信息,是一种行之有效的去噪方法     

Median filter behaviour with seismic data1

Median filters may be used with seismic data to attenuate coherent wavefields. An example is the attenuation of the downgoing wavefield in VSP data processing. The filter is applied across the traces in the ‘direction’ of the wavefield. The final result is given by subtracting the filtered version of the record from the original record. This method of median filtering may be called ‘median filtering operated in subtraction’. The method may be extended by automatically estimating the slowness of coherent wavefields on a record. The filter is then applied in a time- and-space varying manner across the record on the basis of the slowness values at each point on the record. Median filters are non-linear and hence their behaviour is more difficult to determine than linear filters. However, there are a number of methods that may be used to analyse median filter behaviour: (1) pseudo-transfer functions to specific time series; (2) the response of median filters to simple seismic models; and (3) the response of median filters to steps that simulate terminating wavefields, such as faults on stacked data. These simple methods provide an intuitive insight into the behaviour of these filters, as well as providing a semiquantitative measurement of performance. The performance degradation of median filters in the presence of trace-to-trace variations in amplitude is shown to be similar to that of linear filters. The performance of median filters (in terms of signal distortion) applied obliquely across a record may be improved by low-pass filtering (in the t-dimension). The response of median filters to steps is shown to be affected by background noise levels. The distortion of steps introduced by median filters approaches the distortion of steps introduced by the corresponding linear filter for high levels of noise.     

台站地震资料的时频域自适应极化分析和滤波

提出一种自适应协方差的时频域极化滤波方法。该方法在广义S变换时频方法的基础上,构造时频域自适应协方差矩阵,通过特征分析计算时频域瞬时极化参数,设计极化滤波器,实现多分量地震极化分析和滤波。其优势在于协方差矩阵的分析时窗的长度由多分量地震数据的瞬时频率确定,可以自适应于有效信号的周期,在每个时频点计算极化参数不需要进行插值处理;结合时间频率信息,解决在时间域或频率域波形或频率重叠的信号具有明显的直观性。模型数据及实际三分量台站地震数据处理结果表明,该极化滤波方法在台站地震资料分析和处理方面具有很好的直观性和较高的分辨率。     

自适应非局部均值地震随机噪声压制(英文)

非局部均值滤波是一种基于图像信息冗余的去噪方法,其认为图像自身的有效结构具有一定的重复性,而随机噪声则不具备这一特点,通过利用图像本身的自相似性来达到压制随机噪声的目的,是一种全局的去噪方法。本文把这一思想引入地震数据随机噪声压制中,针对传统非局部均值滤波计算量过大的问题,文章采用分块非局部均值的方式来减少计算量;针对滤波参数选取会影响非局部均值滤波效果的问题,提出一种简单的自适应滤波参数地震数据分块非局部均值算法。模型和实际数据处理结果表明:相对于传统的去噪算法(如f-x反褶积),该方法在压制随机噪声的同时对有效信号保护地更好,具有更高的保真度,更有利于后续的处理和解释工作。     

基于Seislet-TV双正则化约束的地震随机噪声压制方法

人工地震数据总是受到随机噪声的干扰,地震数据时-空变的特性使得常规去噪方法处理效果并不理想,容易导致有效信号的损失.目前广泛应用的预测滤波类方法存在处理时变数据能力不足的问题.随着压缩感知理论的不断完善,稀疏变换阈值算法能够解决时变地震数据噪声压制问题,但是常规的稀疏变换方法,如傅里叶变换,小波变换等,并不是特殊针对地震数据设计的,很难提供地震数据最佳的压缩特征,同时,常规阈值算法容易导致去噪结果过于平滑.因此开发更加有效的时-空变地震数据信噪分离方法具有重要的工业价值.本文将地震数据信噪分离问题归纳为数学基追踪问题,在压缩感知理论框架下,利用特殊针对地震数据设计的VD-seislet稀疏变换方法,结合全变差(TV)算法,构建seislet-TV双正则化条件,并利用分裂Bregman迭代算法求解约束最优化问题,实现地震数据的有效信噪分离.通过理论模型和实际数据测试本文方法,并且与工业标准FXdecon方法进行比较,结果表明基于seislet-TV双正则化约束条件的迭代方法能够更加有效地保护时-空变地震信号,压制地震数据中的强随机噪声.     

EFFICIENT MULTICHANNEL FILTERING OF SEISMIC DATA1

Multichannel filters are used to eliminate coherent noise from surface seismic data, for wavefield separation from VSP stacks, and for signal enhancement. Their success generally depends on the choice of the filter parameters and the domain of application. Multichannel filters can be applied to shots (monitors), common-receiver traces, CDP traces and stacked sections. Cascaded applications in these domains are currently performed in the seismic industry for better noise suppression and for signal enhancement. One-step shot-domain filtering is adequate for some applications. However, in practice, cascaded applications in shot-and common-receiver domains usually give better results when the S/N ratio is low. Multichannel filtering after stacking (especially after repeated applications in shot and/or receiver domains) may create undesirable results such as artificial continuations, or smearing and smoothing of small features such as small throw faults and fine stratigraphic details. Consequently, multichannel filtering after stacking must be undertaken with the utmost care and occasionally only as a last resort. Multichannel filters with fan-shaped responses (linear moveout filters) should be applied after NMO correction. These are the filters commonly used in the seismic industry where they have such names as velocity filters, moveout filters, f-k filters and coherency filters. Filtering before NMO correction may result in break-up and flattening especially of those shallow reflection events with relatively higher curvatures and diffractions. NMO correction is needed prior to wavefield separation from VSP stacks for the same practical reasons outlined above whenever source-receiver offsets are involved. Creation of artificial lineup and smearing at the outputs of multichannel filters is presently the common practical concern. Optimum multichannel filters with well-defined pass, reject and transition bands overcome the latter problems when applied before stacking and after NMO correction. The trace dimension of these filters must be kept small to avoid such lineups and the smoothing of small structures. Good results can be obtained with only five traces, but seven traces seems to be a better compromise both in surface and well seismic applications. The so-called f-k filtering and τ-p domain filtering are no exceptions to the above practical considerations. Residual static computations after multichannel filtering also need special consideration. Since multichannel filtering improves spatial continuity, residual static algorithms using local correlation, i.e. nonsurface-consistent algorithms, may be impractical especially after multichannel filtering.     

航空重力测量数据的小波滤波处理

构造三类连续小波函数对航空重力测量数据进行小波滤波处理. 三类连续小波函数分别用于对测量数据在某一空间尺度（或时间尺度）上的低通,一阶求导和二阶求导滤波. 着重介绍三类连续小波函数的构造原理与过程,并说明其相对于传统的数字滤波器的优势. 对系统的技术参数（滤波器窗口宽度参数δ 和尺度参数s）进行了调试实验. 实算结果显示了方法的可行性和有效性.     

Ricker子波核最小二乘支持向量回归滤波方法的稳健性研究

除了信噪比、有效子波畸变等,稳健性(Robustness)也是度量滤波方法效果的一个重要的物理量,它刻画了滤波系统应对异常点值的能力.一般用影响函数作为评价稳健性的工具.支持向量机方法已较成功地应用于信号与图像的滤波中,尤其Ricker子波核方法更适于地震勘探信号处理.通过考察Ricker子波核最小二乘支持向量回归(L...     

Vibrator Data Denoising Based on Fractional Wavelet Transform

In this paper, a novel data denoising method is proposed for seismic exploration with a vibrator which produces a chirp-like signal. The method is based on fractional wavelet transform (FRWT), which is similar to the fractional Fourier transform (FRFT). It can represent signals in the fractional domain, and has the advantages of multi-resolution analysis as the wavelet transform (WT). The fractional wavelet transform can process the reflective chirp signal as pulse seismic signal and decompose it into multi-resolution domain to denoise. Compared with other methods, FRWT can offer wavelet transform for signal analysis in the timefractional-frequency plane which is suitable for processing vibratory seismic data. It can not only achieve better denoising performance, but also improve the quality and continuity of the reflection syncphase axis.     

Applications of Savitzky-Golay Filter for Seismic Random Noise Reduction

This article utilizes Savitzky–Golay (SG) filter to eliminate seismic random noise. This is a novel method for seismic random noise reduction in which SG filter adopts piecewise weighted polynomial via leastsquares estimation. Therefore, effective smoothing is achieved in extracting the original signal from noise environment while retaining the shape of the signal as close as possible to the original one. Although there are lots of classical methods such as Wiener filtering and wavelet denoising applied to eliminate seismic random noise, the SG filter outperforms them in approximating the true signal. SG filter will obtain a good tradeoff in waveform smoothing and valid signal preservation under suitable conditions. These are the appropriate window size and the polynomial degree. Through examples from synthetic seismic signals and field seismic data, we demonstrate the good performance of SG filter by comparing it with the Wiener filtering and wavelet denoising methods.     

重构小波阈值函数在信号去噪中的应用与研究

实际工程应用中,通过物理手段采集到的信号都带有噪声信息,这样就会淹没很多有用信号,传统的“带通、低通、高通”滤波技术往往显得无能为力,因此提取有用的特征信息就需要对原始信号进行去噪。常用的小波阈值去噪（硬、软阈值函数）方法,含有诸多缺点,本文在其基础上重新构造了一个新的阈值函数。在MTALAB（2014a）环境下,用传统的硬、软阈值函数及重构阈值函数对混入高斯白噪声信号进行去噪仿真分析,结果表明,重构的阈值函数处理的信号效果更好,更清晰。      

THE KALMAN FILTER AS A PREDICTION ERROR FILTER*

In mathematical statistical filtering the deconvolution problem can be solved by two different methods:

• 1 by inverse filtering
• 2 by calculating the prediction error.

Both methods are well known in the theory of Wiener filters. If, however, the generating process of the signal is known and can be described by a set of linear first order differential equations, then the Kalman filter can also be used to solve the deconvolution problem. In the case of the inverse filtering method this was shown by Bayless and Brigham (1970). But, while their method can only be used if the original signal is a colored random process, this paper shows that in the case of a white process the prediction error filtering method is a more appropriate approach. The method is extremely efficient and simple. This can be demonstrated by an example which maybe of special interest for seismic exploration.