Effect of solar flare on the equatorial electrojet in eastern Brazil region

The effect of solar flare, sudden commencement of magnetic storm and of the disturbances ring current on the equatorial electrojet in the Eastern Brazil region, where the ground magnetic declination is as large as \(20^{^{\circ }}\hbox {W}\) is studied based on geomagnetic data with one minute resolution from Bacabal during November–December 1990. It is shown that the mean diurnal vector of the horizontal field was aligned along \(2{^{\circ }}\hbox {E}\) of north at Huancayo and \(30{^{\circ }}\hbox {W}\) of north at Bacabal during the month of December 1990. Number of solar flares that occurred on 30 December 1990 indicated the direction of solar flare related \(\Delta H\) vector to be aligned along \(5{^{\circ }}\hbox {E}\) of north at Huancayo and \(28{^{\circ }}\hbox {W}\) of north at Bacabal. This is expected as the solar flare effects are due to the enhanced conductivity in the ionosphere. The SC at 2230 UT on 26 November 1990 produced a positive impulse in \(\Delta X\) and negative impulse in \(\Delta Y\) at Bacabal with \(\Delta H\) vector aligned along \(27{^{\circ }}\hbox {W}\) of north. At Huancayo the \(\Delta H\) vector associated with SC is aligned along \(8{^{\circ }}\hbox {E}\) of north, few degrees east to the alignment of the diurnal vector of H. The magnetic storm that followed the SC had a minimum Dst index of –150 nT. The corresponding storm time disturbance in \(\Delta X\) at Huancayo as well as at Bacabal were about –250 nT but \(\Delta Y\) at Bacabal was about +70 nT and very small at Huancayo, that give the alignment of the H vector due to ring current about \(16{^{\circ }}\hbox {W}\) of north at Bacabal and almost along N–S at Huancayo. Thus alignment of the \(\Delta H\) vector due to ring current at Bacabal is \(14{^{\circ }}\hbox {E}\) of the mean direction of \(\Delta H\) vector during December 1990. This is consistent with the direction of ring current dependent on the dipole declination at the ring current altitude which is about \(5{^{\circ }}\hbox {W}\) of north over Bacabal and the deviation of declination due to the ring current during disturbed period given by the angle (\(\psi \)-D).     

New paleomagnetic results on $$\sim $$2367 Ma Dharwar giant dyke swarm,Dharwar craton,southern India: implications for Paleoproterozoic continental reconstruction

Here we report new paleomagnetic results and precise paleopole position of the extensional study on \(\sim \)2367 Ma mafic giant radiating dyke swarm in the Dharwar craton, southern India. We have sampled 29 sites on 12 dykes from NE–SW Karimnagar–Hyderabad dykes and Dhone–Gooty sector dykes, eastern Dharwar craton to provide unambiguous paleomagnetism evidence on the spectacular radiating dyke swarm and thereby strengthening the presence of single magmatic event at \(\sim \)2367 Ma. A total of 158 samples were subjected to detailed alternating field and thermal demagnetization techniques and the results are presented here along with previously reported data on the same dyke swarm. The remanent magnetic directions are showing two components, viz., seven sites representing four dykes show component (A) with mean declination of \(94{{}^{\circ }}\) and mean inclination of \(-\,70{{}^{\circ }}\) (\(\hbox {k}=87\), \(\upalpha _{95}=10{{}^{\circ }}\)) and corresponding paleopole at \(16{{}^{\circ }}\hbox {N}\), \(41{{}^{\circ }}\hbox {E}\) (\(\hbox {dp}=15{{}^{\circ }}\) and \(\hbox {dm}=17{{}^{\circ }}\)) and 22 sites representing 8 dykes yielded a component (B) with mean declination of \(41{{}^{\circ }}\) and mean inclination of \(-\,21{{}^{\circ }}\) (\(\hbox {k}=41\), \(\upalpha _{95}=9{{}^{\circ }}\)) with a paleopole at \(41{{}^{\circ }}\hbox {N}\), \(200{{}^{\circ }}\hbox {E}\) (\(\hbox {dp}=5{{}^{\circ }}\) and \(\hbox {dm}=10{{}^{\circ }}\)). Component (A) results are similar to the previously reported directions from the \(\sim \)2367 Ma dyke swarm, which have been confirmed fairly reliably to be of primary origin. The component (B) directions appear to be strongly overprinted by the 2080 Ma event. The grand mean for the primary component (A) combined with earlier reported studies gives mean declination of \(97{{}^{\circ }}\) and mean inclination of \(-\,79{{}^{\circ }}\) (\(\hbox {k}=55\), \(\upalpha _{95}=3{{}^{\circ }}\)) with a paleopole at \(15{{}^{\circ }}\hbox {N}\), \(57{{}^{\circ }}\hbox {E}\) (\(\hbox {dp}=5{{}^{\circ }}\), \(\hbox {dm}=6{{}^{\circ }}\)). Paleogeographical position for the Dharwar craton at \(\sim \)2367 Ma suggests that there may be a chance to possible spatial link between Dharwar dykes of Dharwar craton (India), Widgemooltha and Erayinia dykes of Yilgarn craton (Australia), Sebanga Poort Dykes of Zimbabwe craton (Africa) and Karelian dykes of Kola-Karelia craton (Baltica Shield).     

Phase diagram and thermodynamic properties of AIPO<Subscript>4</Subscript> based on first-principles calculations and the quasiharmonic approximation

We calculated the phase diagram of \(\hbox {AlPO}_{4}\) up to 15 GPa and 2,000 K and investigated the thermodynamic properties of the high-pressure phases. The investigated phases include the berlinite, moganite-like, \(\hbox {AlVO}_{4},\, P2_1/c\), and \(\hbox {CrVO}_{4}\) phases. The computational methods used include density functional theory, density functional perturbation theory, and the quasiharmonic approximation. The investigated thermodynamic properties include the thermal equation of state, isothermal bulk modulus, thermal expansivity, and heat capacity. With increasing pressure, the ambient phase berlinite transforms to the moganite-like phase, and then to the \(\hbox {AlVO}_{4}\) and \(P2_1/c\) phases, and further to the \(\hbox {CrVO}_{4}\) phase. The stability fields of the \(\hbox {AlVO}_{4}\) and \(P2_1/c\) phases are similar in pressure but different in temperature, as the \(\hbox {AlVO}_{4}\) phase is stable at low temperatures, whereas the \(P2_1/c\) phase is stable at high temperatures. All of the phase relationships agree well with those obtained by quench experiments, and they support the stabilities of the moganite-like, \(\hbox {AlVO}_{4}\), and \(P2_1/c\) phases, which were not observed in room-temperature compression experiments.     

Comparison of earthquake source characteristics in the Kachchh Rift Basin and Saurashtra horst,Deccan Volcanic Province,western India

Seismic source parameters of small to moderate sized intraplate earthquakes that occurred during 2002–2009 in the tectonic blocks of Kachchh Rift Basin (KRB) and the Saurashtra Horst (SH), in the stable continental region of western peninsular India, are studied through spectral analysis of shear waves. The data of aftershock sequence of the 2001 Bhuj earthquake (\(M_{w}\) 7.7) in the KRB and the 2007 Talala earthquake (\(M_{w}\) 5.0) in the SH are used for this study. In the SH, the seismic moment (\(M_{o})\), corner frequency \((f_{c})\), stress drop (\(\varDelta \sigma \)) and source radius (r) vary from \(7.8\times 10^{11}\) to \(4.0\times \)10\(^{16}\) N-m, 1.0–8.9 Hz, 4.8–10.2 MPa and 195–1480 m, respectively. While in the KRB, these parameters vary from \(M_{o} \sim 1.24 \,\times \, 10^{11}\) to \(4.1 \times 10^{16}\) N-m, \(f_{c }\sim \) 1.6 to 13.1 Hz, \(\varDelta \sigma \sim 0.06\) to 16.62 MPa and \(r \sim 100\) to 840 m. The kappa (K) value in the KRB (0.025–0.03) is slightly larger than that in the SH region (0.02), probably due to thick sedimentary layers. The estimated stress drops of earthquakes in the KRB are relatively higher than those in SH, due to large crustal stress concentration associated with mafic/ultramafic rocks at the hypocentral depths. The results also suggest that the stress drop value of intraplate earthquakes is larger than the interplate earthquakes. In addition, it is observed that the strike-slip events in the SH have lower stress drops, compared to the thrust and strike-slip events.     

Characteristics of surface ozone in Agra,a sub-urban site in Indo-Gangetic Plain

In the present study, measurements of surface ozone (\(\hbox {O}_{3}\)) and its precursors (NO and \(\hbox {NO}_{2}\)) were carried out at a sub-urban site of Agra (\(27{^{\circ }}10'\hbox {N}\), \(78{^{\circ }}05'\hbox {E}\)), India during May 2012–May 2013. During the study period, average concentrations of \(\hbox {O}_{3}\), NO, and \(\hbox {NO}_{2}\) were \(39.6 \pm 25.3\), \(0.8 \pm 0.8\) and \(9.1 \pm 6.6 \, \hbox {ppb}\), respectively. \(\hbox {O}_{3}\) showed distinct seasonal variation in peak value of diurnal variation: summer \({>}\) post-monsoon \({>}\) winter \({>}\) monsoon. However, \(\hbox {NO}_{2}\) showed highest levels in winter and lowest in monsoon. The average positive rate of change of \(\hbox {O}_{3}\) (08:00–11:00 hr) was highest in April (16.3 ppb/hr) and lowest in August (1.1 ppb/hr), while average negative rate of change of \(\hbox {O}_{3}\) (17:00–19:00 hr) was highest in December (–13.2 ppb/hr) and lowest in July (–1.1 ppb/hr). An attempt was made to identify the \(\hbox {VOC--NO}_{\mathrm{x}}\) sensitivity of the site using \(\hbox {O}_{3}/\hbox {HNO}_{3}\) ratio as photochemical indicator. Most of the days this ratio was above the threshold value (12–16), which suggests \(\hbox {NO}_{\mathrm{x}}\) sensitivity of the site. The episodic event of ozone was characterized through meteorological parameters and precursors concentration. Fine particles (\(\hbox {PM}_{2.5}\)) cause loss of ozone through heterogeneous reactions on their surface and reduction in solar radiation. In the study, statistical analyses were used to estimate the amount of ozone loss.     

Correlation analyses of effects of temperature on physical and mechanical properties of clay

In determining the physical and mechanical parameters of clay, it is sometimes necessary to determine them indirectly from other parameters since they cannot be measured directly from laboratory or field tests. In order to determine the effect of temperature on the behavior of clay, an indirect approach is used here by analyzing the changes of mass (\(\Delta m\)), density (\(\rho\)), porosity (\(\phi\)), P-wave velocity (\({v_p}\)), thermal conductivity (\(\lambda\)), specific heat capacity (c), resistivity (R) and uniaxial compressive strength (f) of clay from eastern China for a temperature range between 20 and 800 °C. The results indicate that temperature has a significant effect on these parameters. Comparisons between \(\Delta m\) and \(\rho\), \(\Delta m\) and \({v_p}\), \(\rho\) and \({v_p}\), \(\phi\) and \(\lambda\), \({v_p}\) and f, R and f show a linear change among these parameters,whereas the relationships among \(\Delta m\) and \(\phi\), \(\phi\) and \({v_p}\), \(\phi\) and R, \({v_p}\) and \(\lambda\), \(\phi\) and f are exponential. It is difficult to obtain these relationships by using regression analysis with high levels of accuracy. Further refinement is therefore required.     

Near InfraRed Imaging Spectrograph (NIRIS) for ground-based mesospheric OH(6-2) and $$\hbox {O}_{2}$$(0-1) intensity and temperature measurements

This paper describes the development of a new Near InfraRed Imaging Spectrograph (NIRIS) which is capable of simultaneous measurements of OH(6-2) Meinel and \(\hbox {O}_{2}\)(0-1) atmospheric band nightglow emission intensities. In this spectrographic technique, rotational line ratios are obtained to derive temperatures corresponding to the emission altitudes of 87 and 94 km. NIRIS has been commissioned for continuous operation from optical aeronomy observatory, Gurushikhar, Mount Abu (\(24.6^{\circ }\hbox {N}\), \(72.8^{\circ }\hbox {E}\)) since January 2013. NIRIS uses a diffraction grating of 1200 lines \(\hbox {mm}^{-1}\) and 1024\(\times \)1024 pixels thermoelectrically cooled CCD camera and has a large field-of-view (FOV) of \(80^{\circ }\) along the slit orientation. The data analysis methodology adopted for the derivation of mesospheric temperatures is also described in detail. The observed NIRIS temperatures show good correspondence with satellite (SABER) derived temperatures and exhibit both tidal and gravity waves (GW) like features. From the time taken for phase propagation in the emission intensities between these two altitudes, vertical phase speed of gravity waves, \(c_{z}\), is calculated and along with the coherent GW time period ‘\(\tau \)’, the vertical wavelength, \(\lambda _{z}\), is obtained. Using large FOV observations from NIRIS, the meridional wavelengths, \(\lambda _{y}\), are also calculated. We have used one year of data to study the possible cause(s) for the occurrences of mesospheric temperature inversions (MTIs). From the statistics obtained for 234 nights, it appears that in situ chemical heating is mainly responsible for the observed MTIs than the vertical propagation of the waves. Thus, this paper describes a novel near infrared imaging spectrograph, its working principle, data analysis method for deriving OH and \(\hbox {O}_{2}\) emission intensities and the corresponding rotational temperatures at these altitudes, derivation of gravity wave parameters (\(\tau \), \(c_{z}\), \(\lambda _{z}\), and \(\lambda _{y})\), and results on the statistical study of MTIs that exist in the earth’s mesospheric altitudes.     

Indian summer monsoon forcing on the deglacial polar cold reversals

The deglacial transition from the last glacial maximum at \(\sim \)20 kiloyears before present (ka) to the Holocene (11.7 ka to Present) was interrupted by millennial-scale cold reversals, viz., Antarctic Cold Reversal (\(\sim \)14.5–12.8 ka) and Greenland Younger Dryas (\(\sim \)12.8–11.8 ka) which had different timings and extent of cooling in each hemisphere. The cause of this synchronously initiated, but different hemispheric cooling during these cold reversals (Antarctic Cold Reversal \(\sim \)3\(^{\circ }\hbox {C}\) and Younger Dryas \(\sim \)10\(^{\circ }\hbox {C}\)) is elusive because \(\hbox {CO}_{2}\), the fundamental forcing for deglaciation, and Atlantic meridional overturning circulation, the driver of antiphased bipolar climate response, both fail to explain this asymmetry. We use centennial-resolution records of the local surface water \(\delta ^{18}\hbox {O}\) of the Eastern Arabian Sea, which constitutes a proxy for the precipitation associated with the Indian Summer Monsoon, and other tropical precipitation records to deduce the role of tropical forcing in the polar cold reversals. We hypothesize a mechanism for tropical forcing, via the Indian Summer Monsoons, of the polar cold reversals by migration of the Inter-Tropical Convergence Zone and the associated cross-equatorial heat transport.     

Geochemical assessment of fluoride enrichment and nitrate contamination in groundwater in hard-rock aquifer by using graphical and statistical methods

This systematic study was carried out with objective to delineate the various sources responsible for \(\hbox {NO}_{3}^{-}\) contamination and \(\hbox {F}^{-}\) enrichment by utilizing statistical and graphical methods. Since Central Ground Water Board, India, indicated susceptibility of \(\hbox {NO}_{3}^{-}\) contamination and \(\hbox {F}^{-}\) enrichment, in most of the groundwater, \(\hbox {NO}_{3}^{-}\) and \(\hbox {F}^{-}\) concentration primarily observed \({>}45\) and \({>}1.5~\hbox {mg/L}\), respectively, i.e., higher than the permissible limit for drinking water. Water Quality Index (WQI) indicates \({\sim }22.81\%\) groundwater are good-water, \({\sim }71.14\%\) groundwater poor-water, \({\sim }5.37\%\) very poor-water and 0.67% unsuitable for drinking purpose. Piper diagram indicates \({\sim }59.73\%\) groundwater hydrogeochemical facies are Ca–Mg–\(\hbox {HCO}_{3 }\) water-types, \({\sim }28.19\%\) Ca–Mg–\(\hbox {SO}_{4}\)–Cl water-types, \({\sim }8.72\%\) Na–K–\(\hbox {SO}_{4}\)–Cl water-types and 3.36% Na–K–\(\hbox {HCO}_{3 }\) water-types. This classification indicates dissolution and mixing are mainly controlling groundwater chemistry. Salinity diagram indicate \({\sim }44.30\%\) groundwater under in low sodium and medium salinity hazard, \({\sim }49.66\%\) groundwater fall under low sodium and high salinity hazard, \({\sim }3.36\%\) groundwater fall under very-high salinity hazard. Sodium adsorption ratio indicates \({\sim }97\%\) groundwater are in excellent condition for irrigation. The spatial distribution of \(\hbox {NO}_{3}^{-}\) indicates significant contribution of fertilizer from agriculture lands. Fluoride enrichment occurs in groundwater through the dissolution of fluoride-rich minerals. By reducing the consumption of fertilizer and stress over groundwater, the water quality can be improved.     

Micromechanical Modeling of Yield in Isotropic Non-Cohesive Particulate Materials

We perform a micromechanical analysis of general isotropic non-cohesive particulate materials idealized as three-dimensional random assemblies of uniform spheres with a simple linear elastic inter-particle contact force law and inter-particle Coulomb friction law. We obtain analytical relationships between the inter-particle friction coefficient \(\mu\) (or inter-particle friction angle \(\phi _\mu = \tan ^{-1} \mu\)) on the microscale and the material friction angle \(\phi\) on the macroscale. Our micromechanical analysis directly employs force and moment equilibrium (together with compatibility and the contact constitutive assumptions noted) rather than energy methods, and thus can account for the effects of particle rotation, and in particular the effects of mechanisms or zero-energy modes due to particle rotation. To explore the effects of particle rotation, we perform analyses with particle rotation either allowed or prohibited. To validate the analytical results obtained here, we compare the \(\phi\) versus \(\phi _\mu\) curves determined theoretically to those obtained by the discrete element method (DEM) for six randomly packed specimens of 3430–29, 660 uniform spherical elements with uniform inter-element Coulomb friction in Fleischmann et al. in Geotech Geol Eng 32(4):1081–1100, (2014). The \(\phi\) versus \(\phi _\mu\) curves derived here show remarkable agreement with those obtained via DEM simulations in Fleischmann et al. in Geotech Geol Eng 32(4):1081–1100, (2014), especially for the case in which particle rotation is not artificially restrained.     

Strain responses of frozen clay with thermal gradient under triaxial creep

Thermal gradient is one of the main features for the temperature distribution in artificial frozen shaft lining (FSL). The time-dependent strain responses and the corresponding heterogeneity characteristics of frozen soils with thermal gradient are of potential significance for stability assessment and prediction of FSL, especially of the FSL embedded in thick alluvium. A series of triaxial creep tests were carried out on frozen saturated clay under various thermal gradients and creep stresses. The experimental results indicated that the triaxial creep curves for frozen clay with thermal gradient exhibit viscous characteristics, and the creep rate \(\Delta \varepsilon_{\text{a}} /\Delta t\) decreases with the increase in creep time \(t\) and decrease in thermal gradient. The stress–strain curve under different \(t\) showed that the creep stress has a marked growth when axial strain \(\varepsilon_{\text{a}} \le 1\,\%\). However, when \(\varepsilon_{\text{a}} \ge 1\,\%\), the growth rate decreases gradually. The deviation between measured radial strain \(\varepsilon_{\text{r}}^{\text{m}}\) under the middle specimen section height SSH and the calculated radial strain \(\varepsilon_{\text{r}}^{\text{c}}\) from the volumetric strain increases following a unified equation with the increase in axial strain. The radial strain \(\varepsilon_{\text{r}}^{\text{f}}\) for frozen clay with thermal gradient after experiment increases with the increase in SSH, and the slope of \( \varepsilon_{\text{r}}^{\text{f}} - {\text{SSH}} \) curve is significantly dependent on the thermal gradient and creep stress. The variation of \(\varepsilon_{\text{r}}^{\text{m}} - \varepsilon_{\text{r}}^{\text{c }}\) during experiment and \(\varepsilon_{\text{r}}^{\text{f}}\) distribution after experiment are the macro-responses of internal micro-heterogeneities in frozen soils induced from thermal gradient, and are closely related to strain rate and its variation. These observations and findings provide an insight into the creep mechanism and the estimation method of creep deformation for frozen soils with thermal gradient.     

Moisture rainout fraction over the Indian Ocean during austral summer based on $$^{18}\hbox {O}/{}^{16}\hbox {O}$$ ratios of surface seawater,rainwater at latitude range of 10°N–60°S

Oxygen isotope ratios (\(^{18}\hbox {O}/^{16}\hbox {O}\)) of surface seawater and rainwater samples from the Indian Ocean region (10°N–60°S) during austral summer collected onboard ORV Sagar Nidhi during 2011–2013 have been measured along with salinity, sea surface temperature and relative humidity. The rainwater is isotopically lighter (by \(4.6\pm 2.7\permille )\) compared to the equilibrium condensation of the vapour arising from the seawater at the ambient condition. The isotopic composition of the vapour at high altitude responsible for the rain formation at the sampling location is estimated from a global atmospheric water isotope model (IsoGSM2). The apparent deficit of \(\sim \)5\(\permille \) can be explained by invoking a high degree of rainout (on average, about 70% of the overhead atmospheric moisture) during transport of the source vapour to the sampling location undergoing a Rayleigh fractionation. The required rainout fraction is higher (\(\sim \)80%) in the latitude belt 40°–60°S compared to the equatorial belt (\(\sim \)60%). The pattern of variation in the rainout fraction with latitude is consistent with the well-known evaporation/precipitation processes in the Indian Ocean.     

Influence of Shear Strain on the Poisson’s Ratio of Clean Sands

In the present study, a series of resonant column tests was performed to determine the influence of confining pressure, shear strain and relative density on the dynamic properties and Poisson's ratio of poorly graded clean sand. The tests were performed on the sand specimens of size 50 × 100 mm compacted at relative densities 30, 50 and 75 %. To achieve the corresponding relative density, sand was compacted in 5 equal layers with a specific number of blows. A fixed-free type resonant column apparatus was used to determine the dynamic soil properties at various confining pressures. It has been inferred from the data that the shear modulus (\(G\)) increases with an increase in confining pressure and relative density; and decreases with an increase in shear strain. In addition, damping ratio (\(D\)) decreases with an increase in confining pressure and relative density; and increases with an increase in shear strain. In addition, Poisson’s ratio (\(\nu\)) decreases with an increase in confining pressure and relative density and increases with an increase in the shear strain. The variation of shear modulus with Poisson’s ratio is also discussed. It has been found that there has been a decrease in shear modulus with an increase in Poisson’s ratio of the soil. It is noticed that the small strain shear modulus determined from the present study closely matches with the value determined using the correlations from the literature.     

Pressuremeter Modulus and Limit Pressure of Clayey Soils Using <Emphasis Type="Italic">GMDH</Emphasis>-Type Neural Network and Genetic Algorithms

Pressuremeter modulus (\(E_{M}\)) and limit pressure (\(P_{L}\)) are used for the calculation of the settlement and bearing capacity of foundation respectively. As the determination of these parameters from pressuremeter test (PMT) is relatively time-consuming and expensive, various empirical correlations have been proposed to correlate the \(E_{M}\) and \(P_{L}\) to other soil parameters. For the existing equations are incapable of estimating these PMT parameters well, in present research group method of data handling type neural network is used to estimate the \(E_{M}\) and \(P_{L}\) of clayey soils. The \(E_{M}\) and \(P_{L}\) were modeled as a function of three variables including the moisture content (\(\omega\)), plasticity index and corrected SPT blow counts (\(N_{60}\)). A database containing 51 data sets have been used for training and testing of the models. The performances of proposed models are compared with those of existing empirical equations. The results demonstrate that appreciable improvement with respect to the other correlations has been achieved. At the end, sensitivity analysis of the obtained models has been performed to study the influence of input parameters on model outputs and shows that the \(N_{60}\) is the most influential parameter on the PMT parameters.     

Effect of $$\hbox {CO}_2$$ solubility on dissolution rate of calcite in saline aquifers for temperature range of 50–100 $$^{\circ } \hbox {C}$$∘C and pressures up to 600 bar: alterations of fractures geometry in carbonate rocks by $$\hbox {CO}_2$$-acidified brines

An empirical model is developed to predict the dissolution rate of calcite in saline solutions that are saturated with respect to dissolved \(\hbox {CO}_2\) over a broad range of both subcritical and supercritical conditions. The focus is on determining the rate of calcite dissolution within a temperature range of 50–100 \(^\circ \hbox {C}\) and pressures up to 600 bar, relevant for \(\hbox {CO}_2\) sequestration in saline aquifers. A general reaction kinetic model is used that is based on the extension of the standard Arrhenius equation with an added, solubility-dependent, pH term to account for the saturated concentration of dissolved \(\hbox {CO}_2\). On the basis of this kinetic model, a new rate equation is obtained using multi-parameter, nonlinear regression of experimental data to determine the dissolution of calcite as a function of temperature, pressure and salinity. Different models for the activity coefficient of \(\hbox {CO}_2\) dissolved in saline solutions are accounted for. The new rate equation helps us obtain good agreement with experimental data, and it is applied to study the geochemically induced alterations of fracture geometry due to calcite dissolution.     

Short-temporal variation of soil organic carbon in different land use systems in the Ramsar site 2027 ‘Presa Manuel Ávila Camacho’ Puebla

The soil organic carbon (SOC) was determined in 40 sites at two depths (0–10 and 10–20 cm) for different uses of soil during one year (February 2014–February 2015). The total SOC stored in the analysed soil from the Ramsar site was \(9{,}67 \times 10^{5}\) t, from which 40% was stored in induced pasture, followed by the red oak forest with shrubbery secondary vegetation, rain-fed agriculture and human settlements (24%, 23%, and 13%, respectively); the last was evaluated to determine how the proximity of the city impacts the SOC. The SOC concentrations present significant differences with respect to soil depth (\(p=0.0\)) and land use (\(p=0.0\)). The temporal distribution maps showed that SOC did not present significant variations in the short-term. A relation between SOC and bulk density was found (\(r = -0.654\), \(p=0.00\)), with respect to other physicochemical properties. Moreover, a significant relation between SOC and stored total nitrogen (\(r = 0.585\); \(p = 0.00\)) was found. This work represents the first study that analyses the current condition of the soils in the Ramsar site ‘Presa Manuel Ávila Camacho’.     

Modeling competing hydraulic fracture propagation with the extended finite element method

We present an extended finite element framework to numerically study competing hydraulic fracture propagation. The framework is capable of modeling fully coupled hydraulic fracturing processes including fracture propagation, elastoplastic bulk deformation and fluid flow inside both fractures and the wellbore. In particular, the framework incorporates the classical orifice equation to capture fluid pressure loss across perforation clusters linking the wellbore with fractures. Dynamic fluid partitioning among fractures during propagation is solved together with other coupled factors, such as wellbore pressure loss (\(\Delta p_w\)), perforation pressure loss (\(\Delta p\)), interaction stress (\(\sigma _\mathrm{int}\)) and fracture propagation. By numerical examples, we study the effects of perforation pressure loss and wellbore pressure loss on competing fracture propagation under plane-strain conditions. Two dimensionless parameters \(\Gamma = \sigma _\mathrm{int}/\Delta p\) and \(\Lambda = \Delta p_w/\Delta p\) are used to describe the transition from uniform fracture propagation to preferential fracture propagation. The numerical examples demonstrate the dimensionless parameter \(\Gamma \) also works in the elastoplastic media.     

Lithologic boundaries from gravity and magnetic anomalies over Proterozoic Dalma volcanics

Dalma volcanics (DVs) has intruded the older Singhbhum Group of Metapelites. Despite DVs being rich in mineralisation, its boundaries are not clearly demarcated. Gravity and magnetic surveys have been attempted for mapping the boundaries in DVs. These surveys were made in the northern fringe of the DVs over an area of \(\sim \)0.70 \(\hbox {km}^{2}\) along 13 parallel lines at 50 m spacing. The data was acquired at \(\sim \)25 \(\hbox {m}\) spacing. The surveys were taken for determination of lithological boundaries, depths and nature of causative source using Euler depth solutions and radially averaged power spectrum (RAPS). Residual anomaly maps of gravity and magnetic intensity show the same trend as that of Bouguer gravity anomaly and total magnetic intensity anomaly map indicating towards shallow sources. The magnetic map in general follows the same pattern as that of gravity anomaly maps. The map shows coincident high gravity and magnetic anomalies. These anomalies together with resistivity signatures confirm that the northern fringe of DVs hosts volcanogenic massive sulphide settings. The Euler depth solution delineated the lateral boundaries and nature of the source. It seems that the source is of spherical nature lying within a depth range of 25–40 m. The obtained lithological (vertical) units from RAPS are between Lower DVs, Upper DVs and Singhbhum Group Metapelites at depths of \(\sim \)15, \(~\sim \)25 and \(\sim \)40 \(\hbox {m}\), respectively. The metallogeny is associated with the Upper DVs and the corresponding delineated lithological (vertical) unit is indicative of the top of the ore body. Good agreement is observed with the geological succession from the drilling data and resistivity data. The findings suggest that the northern fringe of DVs could be a preferred target for drilling.     

The geochemical and petrological characteristics of prenatal caldera volcano: a case of the newly formed small dacitic caldera,Hijiori, Northeast Japan

Evaluating the magma depth and its physical properties is critical to conduct a better geophysical assessment of magma chambers of caldera volcanoes that may potentially cause future volcanic hazards. To understand pre-eruptive conditions of a magma chamber before its first appearance at the surface, this paper describes the case of Hijiori caldera volcano in northeastern Japan, which emerged approximately 12,000 years ago at a place where no volcano ever existed. We estimated the depth, density, bulk modulus, vesicularity, crystal content, and bulk H\(_2\)O content of the magma chamber using petrographic interpretations, bulk and microchemical compositions, and thermodynamic calculations. The chemical mass balance calculations and thermodynamic modeling of the erupted magmas indicate that the upper portion of the Hijiori magmatic plumbing system was located at depths between 2 and 4 km, and had the following characteristics: (1) pre-eruptive temperature: about 780 \(^{\circ }\)C; (2) bulk magma composition: 66 ± 1.5 wt% SiO\(_{2}\); (3) bulk magmatic H\(_2\)O: approximately 2.5 wt%, and variable characteristics that depend on depth; (4) crystal content: \(\le\)57 vol%; (5) bulk modulus of magma: 0.1–0.8 GPa; (6) magma density: 1.8–2.3 g/cm³; and (7) amount of excess magmatic H\(_2\)O: 11–32 vol% or 48–81 mol%. The range of melt water contents found in quartz-hosted melt inclusions (2–9 wt%) suggests the range of depth phenocrysts growth to be wide (2\(\sim\)13 km). Our data suggest the presence of a vertically elongated magma chamber whose top is nearly solidified but highly vesiculated; this chamber has probably grown and re-mobilized by repeated injections of a small amount of hot dacitic magma originated from the depth.     

Rethinking communication in risk interpretation and action

We have studied the attenuation characteristics of eastern Himalaya and southern Tibet by using local earthquake data set that consists of 123 well-located events, recorded by the Himalayan Nepal Tibet Seismic Experiment operated during 2001–2003. We have used single backscattering model to calculate frequency-dependent values of coda Q (\(Q_\mathrm{c}\)). The estimation of \(Q_\mathrm{c}\) is made at central frequencies 2, 4, 8 and 12 Hz through five lapse time windows from 10 to 50 s starting at double the travel time of the S-wave. The observed \(Q_\mathrm{c}\) is found to be strongly frequency-dependent and follows a similar trend as observed in other tectonically active parts of the Himalaya. The trend of variation of \(Q_\mathrm{c}\) with lapse time and the corresponding apparent depths is also studied. Increase in \(Q_\mathrm{c}\) values with the lapse time suggests that the deeper part of the study region is less heterogeneous than the shallower part. The observed values of \(Q_0\) (\(Q_\mathrm{c}\) at 1 Hz) and frequency parameter n indicate that the medium beneath the study area is highly heterogeneous and tectonically very active. A regionalization of the estimated \(Q_0\) is carried out, and a contour map is prepared for the whole region. Some segments of Lesser Himalaya and Sub-Himalaya exhibit very low \(Q_0\) , while the whole Tethyan Himalaya and some parts of Greater Himalaya are characterized by low \(Q_0\) values. Our results are comparable with those obtained from tectonically active regions in the world.