Paleozoic tectonism on the East Gondwana margin: Evidence from SHRIMP U–Pb zircon geochronology of a migmatite–granite complex in West Antarctica

The Fosdick Mountains migmatite–granite complex in West Antarctica records episodes of crustal melting and plutonism in Devonian–Carboniferous time that acted to transform transitional crust, dominated by immature oceanic turbidites of the accretionary margin of East Gondwana, into stable continental crust. West Antarctica, New Zealand and Australia originated as contiguous parts of this margin, according to plate reconstructions, however, detailed correlations are uncertain due to a lack of isotopic and geochronological data. Our study of the mid-crustal exposures of the Fosdick range uses U–Pb SHRIMP zircon geochronology to examine the tectonic environment and timing for Paleozoic magmatism in West Antarctica, and to assess a correlation with the better known Lachlan Orogen of eastern Australia and Western Province of New Zealand.NNE–SSW to NE–SW contraction occurred in West Antarctica in early Paleozoic time, and is expressed by km-scale folds developed both in lower crustal metasedimentary migmatite gneisses of the Fosdick Mountains and in low greenschist-grade turbidite successions of the upper crust, present in neighboring ranges. The metasedimentary rocks and structures were intruded by calc-alkaline, I-type plutons attributed to arc magmatism along the convergent East Gondwana margin. Within the Fosdick Mountains, the intrusions form a layered plutonic complex at lower structural levels and discrete plutons at upper levels. Dilational structures that host anatectic granite overprint plutonic layering and migmatitic foliation. They exhibit systematic geometries indicative of NNE–SSW stretching, parallel to a first-generation mineral lineation. New U–Pb SHRIMP zircon ages for granodiorite and porphyritic monzogranite plutons, and for leucogranites that occupy shear bands and other mesoscopic-scale structural sites, define an interval of 370 to 355 Ma for plutonism and migmatization.Paleozoic plutonism in West Antarctica postdates magmatism in the western Lachlan Orogen of Australia, but it coincides with that in the central part of the Lachlan Orogen and with the rapid main phase of emplacement of the Karamea Batholith of the Western Province, New Zealand. Emplaced within a 15 to 20 million year interval, the Paleozoic granitoids of the Fosdick Mountains are a product of subduction-related plutonism associated with high temperature metamorphism and crustal melting. The presence of anatectic granites within extensional structures is a possible indication of alternating strain states (‘tectonic switching’) in a supra-subduction zone setting characterized by thin crust and high heat flow along the Devonian–Carboniferous accretionary margin of East Gondwana.     

Rheological controls on extensional styles and the structural evolution of the Northern Carnarvon Basin,North West Shelf,Australia

The extensional architecture of the Northern Carnarvon Basin can be explained in terms of changes in lithospheric rheology during multiphase extension and lower crustal flow. Low‐angle detachments, while playing a minor role, are not considered to have been the primary mechanism for extension as suggested in previous models. Early extension (Cambrian‐Ordovician) in the Northern Carnarvon Basin is characterised by low‐angle detachment structures of limited regional extent. These structures have a spatial association with a Proterozoic mobile belt on the margin of the Pilbara Craton. Thermo‐mechanical conditions in the mobile belt may have predisposed the highly deformed crust to thin‐skinned extension and detachment development. Permo‐Carboniferous extension generated an extensive wide rift basin, suggesting ductile rheologies associated with intermediate lithospheric temperatures and crustal thickness. Thick Upper Permian to Upper Triassic post‐rift sequences and marked thinning of the lower crust occurred in association with only a small amount of extension in the upper crust. This observation can be reconciled by considering outward lower crustal flow, from beneath the basin towards the basin margin, following extension. Strong mid‐crustal reflectors, which occur over large areas of the Northern Carnarvon Basin, probably represent a boundary between flow and non‐flow regimes rather than detachment fault surfaces as in previous models. Crustal thinning and thermal decay following Permo‐Carboniferous extension contributed to the increased strength and brittle behaviour of the lithosphere. Consequently, Late Triassic to Early Cretaceous extension resulted in the development of far more localised narrow rift systems on the margins of the preceding wide rift basin. Diapiric intrusions are associated with the narrow rift basin development, resulting from either remobilisation of ductile lower crustal rock or the initial formation of sea‐floor spreading centres.     

Middle Carboniferous crustal melting in the Variscan Belt: New insights from U–Th–Pbtot. monazite and U–Pb zircon ages of the Montagne Noire Axial Zone (southern French Massif Central)

In France, the Devonian–Carboniferous Variscan orogeny developed at the expense of continental crust belonging to the northern margin of Gondwana. A Visean–Serpukhovian crustal melting has been recently documented in several massifs. However, in the Montagne Noire of the Variscan French Massif Central, which is the largest area involved in this partial melting episode, the age of migmatization was not clearly settled. Eleven U–Th–Pb_tot. ages on monazite and three U–Pb ages on associated zircon are reported from migmatites (La Salvetat, Ourtigas), anatectic granitoids (Laouzas, Montalet) and post-migmatitic granites (Anglès, Vialais, Soulié) from the Montagne Noire Axial Zone are presented here for the first time. Migmatization and emplacement of anatectic granitoids took place around 333–326 Ma (Visean) and late granitoids emplaced around 325–318 Ma (Serpukhovian). Inherited zircons and monazite date the orthogneiss source rock of the Late Visean melts between 560 Ma and 480 Ma. In migmatites and anatectic granites, inherited crystals dominate the zircon populations. The migmatitization is the middle crust expression of a pervasive Visean crustal melting event also represented by the “Tufs anthracifères” volcanism in the northern Massif Central. This crustal melting is widespread in the French Variscan belt, though it is restricted to the upper plate of the collision belt. A mantle input appears as a likely mechanism to release the heat necessary to trigger the melting of the Variscan middle crust at a continental scale.     

Mesoproterozoic–Neoproterozoic transition: Geochemistry, provenance and tectonic setting of clastic sedimentary rocks on the SE margin of the Yangtze Block, South China

The SE margin of the Yangtze Block, South China is composed of the Mesoproterozoic Lengjiaxi Group and the Neoproterozoic Banxi Group, with Sinian- and post-Sinian-cover. A geochemical study was undertaken on the Mesoproterozoic–Neoproterozoic clastic sediments in order to delineate the characteristics of the sediment source and to constrain the tectonic development and crustal evolution of South China.Our results show that the Mesoproterozoic clastic sediments have a dominant component derived from a metavolcanic-plutonic terrane, with a large of mafic component. There is a minor contribution of mafic rocks and older upper crustal rocks to the provenance. Strong chemical weathering in the source area occurred before transport and deposition. The provenance for the Neoproterozoic clastic sediments was most likely old upper continental crust composed of tonalite–granodiorite-dominated, tonalite–granodiorite–granite source rocks, which had undergone strong weathering and/or recycling. A minor component of older K-rich granitic plutonic rocks and younger volcanogenic bimodal rocks is also indicated.Based on the regional geology, the geochemical data and the inferred provenance, the Mesoproterozoic Group is interpreted as a successive sedimentary sequence, deposited in an extensional/rifting back-arc basin, adjacent to a >1.80 Ga continental margin arc-terrane. The progressive extension/rifting of the back-arc basin was followed by increasing subsidence and regional uplift during continental marginal arc-continent (the Cathaysian Block) collision at 1.0 Ga caused the deposition of the Neoproterozoic Group into back-arc to retro-arc foreland basin. Therefore, the depositional setting of the Proterozoic clastic sediments and associated volcanic rocks within the back-arc basin reflected basin development from an active continental margin (back-arc basin), with extension or rifting of the back-arc basin, to a passive continental margin.     

High T/P evolution and metamorphic ages of the migmatitic basement of northern Sierras Pampeanas,Argentina: Characterization of a mid-crustal segment of the Famatinian belt

New petrologic, thermobarometric and U-Pb monazite geochronologic information allowed to resolve the metamorphic evolution of a high temperature mid-crustal segment of an ancient subduction-related orogen. The El Portezuelo Metamorphic-Igneous Complex, in the northern Sierras Pampeanas, is mainly composed of migmatites that evolved from amphibolite to granulite metamorphic facies, reaching thermal peak conditions of 670–820 °C and 4.5–5.3 kbar. The petrographic study combined with conventional and pseudosection thermobarometry led to deducing a short prograde metamorphic evolution within migmatite blocks. The garnet-absent migmatites represent amphibolite-facies rocks, whereas the cordierite-garnet-K-feldspar-sillimanite migmatites represent higher metamorphic grade rocks. U-Pb geochronology on monazite grains within leucosome record the time of migmatization between ≈477 and 470 Ma. Thus, the El Portezuelo Metamorphic-Igneous Complex is an example of exhumed Early Ordovician anatectic middle crust of the Famatinian mobile belt. Homogeneous exposure of similar paleo-depths throughout the Famatinian back-arc and isobaric cooling paths suggest slow exhumation and consequent longstanding crustal residence at high temperatures. High thermal gradients uniformly distributed in the Famatinian back-arc can be explained by shallow convection of a low-viscosity asthenosphere promoted by subducting-slab dehydration.     

地壳的拆离作用与华北克拉通破坏:晚中生代伸展构造约束

伸展条件下的地壳拆离作用是岩石圈减薄的重要浅部构造响应。晚中生代时期的伸展构造(包括拆离断层、变质核杂岩构造和断陷盆地)在华北、华南、东北和东蒙古及贝加尔地区普遍发育,它们切过上部地壳(断陷盆地)、中、上地壳(拆离断层)或中部地壳(变质核杂岩)。地壳拆离作用具有运动学极性(NWW或SEE)、几何学宏观(区域)对称与微观(局部)不对称性、遍布全区但不均匀性,以及形成时间的跨越性(140~60Ma)等特点,并使得地壳和岩石圈发生显著的减薄。本文研究揭示出现今岩石圈厚度变化与晚中生代伸展构造的发育程度和分布之间并没有必然的联系。其变化的基本规律是,除新生代裂陷发育区岩石圈厚度明显较小且厚度有迅速变化外,从华北向贝加尔地区总体的变化趋势是逐渐加厚,也即东亚地区岩石圈具有楔形形态。晚中生代时期的地壳(或地幔)拆离作用伴随着广泛的岩石圈减薄作用,区域岩石圈同时遭受到一定程度的减薄和破坏,华北克拉通在这一时期的破坏仅仅是区域岩石圈减薄在华北的具体体现。     

松辽盆地长岭断陷构造演化及其动力学背景

通过大量高精度二维地震剖面的构造解析与平衡地质剖面构造演化史定量恢复,探讨了松辽盆地长岭断陷的构造演化及其地球动力学背景。长岭断陷发育NNE、NNW、SN等多个方向的低角度铲式正断层,它们可能是在晚侏罗世一早白垩世郯庐断裂系左行走滑派生的次级破裂的基础上受断陷期强烈地壳伸展拆离作用形成的。断陷期可分为早晚两个脉冲式伸展事件,每个伸展脉冲均由一个快速伸展期和其后的缓慢伸展期组成,前者与火山活动高峰期相对应,后者则是构造转换期。早期伸展是以热穹窿式多向拉伸为标志,可能是侏罗纪岩石圈加厚后根部发生拆沉作用导致地壳弹性回调和岩浆底侵的结果。而晚期伸展则以NWW-SEE向区域伸展为标志,是对中国东部广泛的地壳伸展拆离和岩石圈减薄事件的响应,可能是伊则纳崎板块俯冲产生的弧后扩张效应。     

Formation of the Shuswap metamorphic core complex during late-orogenic collapse of the Canadian Cordillera: Role of ductile thinning and partial melting of the mid-to lower crust

Abstract

The early Tertiary evolution of the Shuswap metamorphic core complex is characterised by low-angle crustal detachments and nearly isothermal decompression followed by rapid cooling of rocks in the footwall of the detachments. Previous work as well as our own observations suggest that Paleogene late-orogenic extension produced the main tectonic features of the region. Furthermore, structural analysis of the migmatites and published geochronological data indicate that partial melting of the mid- to lower crust was coeval with extension in the upper crustal levels, suggesting that these two processes are linked genetically. Consequently, we propose that the formation of the Shuswap metamorphic core complex corresponds to late-orogenic gravitational collapse of the Canadian Cordillera accommodated by normal faulting of the brittle upper crust and by ductile thinning of the mid- to lower crust. The initiation and amplification of extension during the Paleocene in the Shuswap metamorphic core complex are tentatively related to partial melting of the thickened crust which caused drastic mechanical weakening of the crust.     

Crustal structure of the northeastern margin of the Tibetan plateau from the Songpan-Ganzi terrane to the Ordos basin

The 1000-km-long Darlag–Lanzhou–Jingbian seismic refraction profile is located in the NE margin of the Tibetan plateau. This profile crosses the northern Songpan-Ganzi terrane, the Qinling-Qilian fold system, the Haiyuan arcuate tectonic region, and the stable Ordos basin. The P-wave and S-wave velocity structure and Poisson's ratios reveal many significant characteristics in the profile. The crustal thickness increases from northeast to southwest. The average crustal thickness observed increases from 42 km in the Ordos basin to 63 km in the Songpan-Ganzi terrane. The crust becomes obviously thicker south of the Haiyuan fault and beneath the West-Qinlin Shan. The crustal velocities have significant variations along the profile. The average P-wave velocities for the crystalline crust vary between 6.3 and 6.4 km/s. Beneath the Songpan-Ganzi terrane, West-Qinling Shan, and Haiyuan arcuate tectonic region P-wave velocities of 6.3 km/s are 0.15 km/s lower than the worldwide average of 6.45 km/s. North of the Kunlun fault, with exclusion of the Haiyuan arcuate tectonic region, the average P-wave velocity is 6.4 km/s and only 0.5 km/s lower than the worldwide average. A combination of the P-wave velocity and Poisson's ratio suggests that the crust is dominantly felsic in composition with an intermediate composition at the base. A mafic lower crust is absent in the NE margin of the Tibetan plateau from the Songpan-Ganzi terrane to the Ordos basin. There are low velocity zones in the West-Qinling Shan and the Haiyuan arcuate tectonic region. The low velocity zones have low S-wave velocities and high Poisson's ratios, so it is possible these zones are due to partial melting. The crust is divided into two layers, the upper and the lower crust, with crustal thickening mainly in the lower crust as the NE Tibetan plateau is approached. The results in the study show that the thickness of the lower crust increases from 22 to 38 km as the crustal thickness increases from 42 km in the Ordos basin to 63 km in the Songpan-Ganzi terrane south of the Kunlun fault. Both the Conrad discontinuity and Moho in the West-Qinling Shan and in the Haiyuan arcuate tectonic region are laminated interfaces, implying intense tectonic activity. The arcuate faults and large earthquakes in the Haiyuan arcuate tectonic region are the result of interaction between the Tibetan plateau and the Sino–Korean and Gobi Ala Shan platforms.     

Mesozoic lithospheric deformation in the North China block: Numerical simulation of evolution from orogenic belt to extensional basin system

Horizontal extension of a previously thickened crust could be the principal mechanism that caused the development of widespread extensional basins throughout the North China block (Hua-Bei region) during the Mesozoic. We develop here a regional tectonic model for the evolution of the lithosphere in the North China block, based on thin sheet models of lithospheric deformation, with numerical solutions obtained using the finite element method. The tectonic evolution of this region is defined conceptually by two stages in our simplified tectonic model: the first stage is dominated by N–S shortening, and the second by E–W extension. We associate the N–S shortening with the Triassic continental collision between the North and South China blocks, assuming that the Tan-Lu Fault system defines the eastern boundary of the North China block. The late Mesozoic E–W extension that created the Mesozoic basin systems requires a change in the regional stress state that could have been triggered by either or both of the following factors: First, gravitational instability of the lithosphere triggered by crustal convergence might have removed the lower layers of the thickened mantle lithosphere and thus caused a rapid increase in the local gravitational potential energy of the lithosphere. Secondly, a change to the constraining stress on the eastern boundary of the North China block, that might have been caused by roll-back of the subducting Pacific slab, could have reduced the E–W horizontal stress enough to activate extension. Our simulations show that widespread thickening of the North China block by as much as 50% can be explained by the collision with South China in the Triassic and Jurassic. If convergence then ceases, E–W extension can occur in the model if the eastern boundary of the region can move outwards. We find that such extension may occur, restoring crustal thickness of order 30 km within a period of 50 Myr or less, if the depth-averaged constitutive relation of the lithosphere is Newtonian, and if the Argand number (the ratio of buoyancy-derived stress to viscous stress) is greater than about 4. Widespread convective thinning of the lithosphere is not required in order to drive the extension with these parameters. If, however, the lithospheric viscosity is non-Newtonian (with strain-rate proportional to the third power of stress) the extensional phase would not occur in a geologically plausible time unless the Argand number were significantly increased by a lithospheric thinning event that was triggered by crustal thickening ratios as low as 1.5.     

松辽盆地裂谷期前火山岩与裂谷盆地关系及动力学过程

松辽盆地存在裂谷期前火山岩,之后上地壳脆性伸展发育半地堑裂谷盆地。裂谷期前火山岩近水平展布于基底之上,裂谷期,沉则分布于半地暂内,两者属于不同构造层。     

The tectono-sedimentary evolution of a hyper-extended rift basin: the example of the Arzacq–Mauléon rift system (Western Pyrenees,SW France)

In this paper, we present a sedimentary and structural analysis that together with maps, sections and new Ar/Ar data enable to describe the tectono-sedimentary evolution of the Mauléon hyper-extended rift basin exposed in the W-Pyrenees. Hyper-extension processes that ultimately resulted in exhuming mantle rocks are the result of the subsequent development of two diachronous detachment systems related to two evolutional stages of rifting. An initial Late Aptian Early Albian crustal thinning phase is first recorded by the development of a crustal necking zone controlled by the north-vergent Southern Mauléon Detachment system. During a subsequent exhumation phase, active faulting migrates to the north with the emplacement of the Northern Mauléon detachment system that exhumed north section thinned continental crust and mantle rocks. This diachronous crustal thinning and exhumation processes are also recorded by the diachronous deposition of syn-tectonic sedimentary tracts above the two supra-detachment sub-basins. Syn-tectonic sedimentary tracts record the progressive exhumation of footwall rocks along detachment systems. Tectonic migration from the southern to the northern Mauléon Detachment system is recorded by the coeval deposition of “sag” deposits above the necking zone basin and of syn-tectonic tracts above exhumed rocks north section. Located on a hanging-wall situation related to the Mauléon hyper-extension structures, the Arzacq Basin also records a major crustal thinning phase as shown by its subsidence evolution so as by deep seismic images. The absence of major top-basement structures and its overall sag morphology suggest that crustal thinning processes occurred by decoupled extension of lower crustal levels contrasting with the Southern Mauléon Detachment system. Reconciling observations from the Mauléon and Arzacq Basins, we finally propose in this paper that they were the result of one and the same asymmetric crustal thinning and exhumation processes, where extension is accommodated into the upper crust in the Mauléon Basin (lower plate basin) and relayed in ductile lower crust below the Arzacq Basin (upper plate basin).     

Constraining the mid-crustal channel flow beneath the Tibetan Plateau: data from the Nielaxiongbo gneiss dome,SE Tibet

Gneiss domes involving the South Tibetan Detachment System provide evidence for crustal extension simultaneous with shortening. The Nielaxiongbo gneiss dome is composed of a metamorphic complex of granitic gneiss, amphibolite, and migmatite; a ductilely deformed middle crustal layer of staurolite- or garnet-bearing schist; and a cover sequence of weakly metamorphosed Triassic and Lower Cretaceous strata. The middle crust ductilely deformed layer is separated from both the basement complex and the cover sequence by lower and upper detachments, respectively, with a smaller detachment fault occurring within the ductilely deformed layer. Leucogranites crosscut the basement complex, the lower detachment, and the middle crustal layer, but do not intrude the upper detachment or the cover sequence. Three deformational fabrics are recognized: a N–S compressional fabric (D₁) in the cover sequence, a north- and south-directed extensional fabric (D₂) in the upper detachment and lower tectonic units, and a deformation (D₃) related to the leucogranite intrusion. SHRIMP zircon U–Pb dating yielded a metamorphic age of ～514 million years for the amphibolite and a crystallization age of ～20 million years for the leucogranite. Hornblende from the amphibolite has an ⁴⁰Ar/³⁹Ar age of 18 ± 0.3 million years, whereas muscovites from the schist and leucogranite yielded ⁴⁰Ar/³⁹Ar ages between 13.5 ± 0.2 and 13.0 ± 0.2 million years. These results suggest that the basement was consolidated at ～510 Ma and then exhumed during extension and silicic plutonism at ～20 Ma. Continuing exhumation led to cooling through the 500°C Ar closure temperature in hornblende at ～18 Ma to the 350°C Ar closure temperature in muscovite at ～13 Ma. The middle crustal ductilely deformed layer within gneiss domes of southern Tibet defines a southward-extruding ductile channel, marked by leucogranites emplaced into migmatites and amphibolites. We propose a model involving thinned upper crust for the initial extension of the Tibetan Plateau in the early Miocene.     

Nature of the archean midcrust in the core of the Vredefort dome, Central Kaapvaal Craton, South Africa

Extreme uplift associated with the formation of the 2.02 Ga Vredefort dome has exposed a substantial cross section through the crystalline early Archean basement complex rocks of the Kaapvaal craton. The rocks comprise polydeformed high-grade tonalite-trondhjemite-granodiorite (TTG) gneisses, migmatites and late-tectonic intrusive granitoids that straddle the upper amphibolite-to granulite-facies transition. Field, petrographic and geochemical data indicate that compositional heterogeneity occurs on a local scale and reflects the migmatitic character of the rocks rather than crustal-scale layering as has been previously proposed. No evidence has been found to support exposure of either a melt-depleted, refractory, lower crust or an upper crustal batholithic granite layer; however, the immense volume of granitic leucosome in the rocks suggests that the exposed section represents an intermediate level between these two zones. Granitic leucosomes in the upper amphibolite-facies migmatites appear to be intrusive into the predominantly trondhjemitic host rocks, rather than of in situ derivation. Leucosome compositions in the granulite-facies migmatites are more variable, ranging from granitic and charnockitic to enderbitic, probably reflecting at least some local derivation. Leucosomes and small granitoid bodies show local-scale geochemical variation that can be explained in terms of variable amounts of melt segregation and migration, and fractionation of minerals such as K-feldspar within the melts.     

The geological and geodynamic evolution of the eastern Black Sea basin: insights from 2-D and 3-D tectonic modelling

Subsidence mechanisms that may have controlled the evolution of the eastern Black Sea have been studied and simulated using a numerical model that integrates structural, thermal, isostatic and surface processes in both two- (2-D) and three-dimensions (3-D). The model enables the forward modelling of extensional basin evolution followed by deformation due to subsequent extensional and compressional events. Seismic data show that the eastern Black Sea has evolved via a sequence of interrelated tectonic events that began with early Tertiary rifting followed by several phases of compression, mainly confined to the edges of the basin. A large magnitude (approximately 12 km) of regional subsidence also occurred in the central basin throughout the Tertiary. Models that simulate the magnitude of observed fault controlled extension (β=1.13) do not reproduce the total depth of the basin. Similarly, the modelling of compressional deformation around the edges of the basin does little to enhance subsidence in the central basin. A modelling approach that quantifies lithosphere extension according to the amount of observed crustal thinning and thickening across the basin provides the closest match to overall subsidence. The modelling also shows that deep crustal and mantle–lithosphere processes can significantly influence the rate and magnitude of syn- to post-rift subsidence and shows that such mechanisms may have played an important role in forming the anomalously thin syn-rift and thick Miocene–Quaternary sequences observed in the basin. It is also suggested that extension of a 40–45 km thick pre-rift crust is required to generate the observed magnitude of total subsidence when considering a realistic bathymetry.     

AMS record of brittle dilation,viscous-stretching and gravity-driven magma ascent in area of magma-rich crustal extension (Vosges Mts., NE France)

Orogenic compression-related fabrics (~340–335 Ma) were reworked during regional extensional deformation (~328–325 Ma) in a large anatectic crustal domain of the Central Vosges (NE France). The extension was first accommodated by brittle dilation affecting vertically anisotropic high-grade rocks associated with emplacement of subvertical granitic sheets. The AMS fabric of granitoids is consistent with highly partitioned transtensional deformation marked by alternations of flat and steep foliations and development of orthogonal lineations. This deformation passes to top-to-the-southwest ductile shearing expressed in southerly migmatitic middle crust. The AMS fabric revealed moderately west-dipping foliations bearing subhorizontal NNW–SSE-trending lineations and predominantly plane strain to prolate shapes. This fabric pattern is interpreted as a viscous response of stretched partially molten crust during continuous ductile extension. Vertical ascent of voluminous granites and stoping of the upper crust occurs further south. This gravity ascent triggered by extension leads to development of south-dipping AMS foliations, south-plunging lineations and oblate fabrics in various crustal granites. Vertical shortening related to ascent of these (~325 Ma) granitoids and persistent N–S stretching is responsible for reworking and remelting of originally vertical compression-related fabric in roof supracrustal granites (~340 Ma) and development of highly prolate fabrics in these rocks. This work shows that the finite shape of AMS fabric ellipsoid is highly sensitive to both strain regime and superpositions of orthogonal deformation events.     

P-wave velocity structure under the Changbaishan volcanic region, NE China, from wide-angle reflection and refraction data

We present velocity models determined by inverting refracted and reflected arrivals along two active source lines in the Changbaishan volcanic region, NE China. We resolve a prominent low-velocity zone (LVZ) in the crust, with velocities as low as 5.4 km/s. Away from the LVZ, the velocity gradients in the crust are relatively smooth, with average P-wave velocities of about 6.0–6.5 km/s. The Moho is at about 35 km depth, thickening to about 40 km under the Tianchi volcano, and thinning to about 30 km under the LVZ. The LVZ is located about 30–60 km to the north of the summit of the Tianchi volcano (the most recently active volcano in the region), is about 30–75 km in north–south extent, is at most 35 km in east–west extent, and is in the depth range of about 10–25 km below the surface. We use these results to constrain receiver function inversions, and show that the receiver functions in the region are compatible with our findings. With these data alone, the significance of the LVZ in non-unique, although we do not see any evidence to support the presence of partial melt in the crust, and favor the interpretation that the LVZ indicates a residual crustal magma chamber.     

MnNCKFMASH phase relations in cordierite-orthopyroxene migmatitic gneisses, southern india: implications for low-pressure crustal melting under granulite-facies

Cordierite-orthopyroxene migmatitic gneisses exposed in Achankovil unit of the Kerala Khondalite Belt, southern India show evidences of melting, melt extraction and in-situ crystallization of melt under granulite-facies conditions. The sequential mineral assemblages garnet + biotite + orthopyroxene + plagioclase + quartz (± melt) in the mesosomes and garnet + biotite + orthopyroxene + cordierite + plagioclase + K-feldspar + quartz + melt in the melanosomes makes the Achankovil cordierite-orthopyroxene migmatitic gneisses a good example of anatectic rocks, where substantial melt fractions remained in-situ during decompression and cooling. Therefore, the rocks provide an opportunity to investigate deep crustal processes and record of rheological (thermal and mechanical) reequilibration prevailed during the final stages of orogeny. The significance of cordierite formation and its possible relationship with melt formation are investigated applying theoretical calculations in the MnO-Na₂O-CaO-K₂O-FeO-MgO-Al₂O₃-SiO₂-H₂O (MnNCKFMASH) system. Results of numerical modelling of the mineral assemblages in pressure-temperature-composition (P-T-X) pseudosections using Perple_X infer that the sequence of reactions involving formation of cordierite-orthopyroxene-melt assemblage is consistent with an isothermal decompression (with a pressure drop of >1.5 kbars) at high temperatures (>800 °C), forming leucosomes. Biotite dehydration melting reactions, occurring above 4.5 kbars constrain prograde arm of the P-T trajectory and is interpreted as a product of crustal thickening, which was followed by rapid decompression. The final stage of exhumation is characterized by rehydration of cordierites in the melanosome by melt-solid interactions at exceptionally low-pressure (??3.2 kbars) conditions. The high-temperature isothermal decompression inferred from the mineral reactions and P-T-X pseudosections constitute a clockwise P-T path for the exhumation of the lower crust. This clockwise P-T path is consistent with the common tectonic model accepted for the genesis of granulite-facies migmatites during crustal thickening and later unroofing, accompanied with arc-continent collision. Our conclusions indicate low-P metamorphism and anatexis can be traced to convergent setting, where melt buoyancy considerably decreases density of the lithosphere and modifies rheology leading to rapid exhumation of the lower crust. Therefore, the crustal evolution in the Kerala Khondalite Belt is correlated with two stage processes: (i) thickening of the crust in relation to a continental-arc setting, followed by (ii) exhumation along a high-temperature stable geotherm with sufficient pressure release associated with syn- to post-convergence transpression and transtension.     

Are the Chinese Altai “terranes” the result of juxtaposition of different crustal levels during Late Devonian and Permian orogenesis?

The general structure of the Chinese Altai has been traditionally regarded as being formed by five tectono-stratigraphic ‘terranes’ bounded by large-scale faults. However, numerous detrital zircon studies of the Paleozoic volcano-sedimentary sequences shown that the variably metamorphosed Cambro-Ordovician sequence, known as the Habahe Group, is present at least in four ‘terranes’. It structurally represents deepest rocks unconformably covered by Devonian and Carboniferous sedimentary and volcanic rocks. Calc-alkaline, mostly Devonian, granitoids that intruded all the terranes revealed their syn-subduction related setting. Geochemistry and isotope features of the syn-subduction granitoids have shown that they originated mainly from the melting of youthful sediments derived from an eroded Ordovician arc further north. In contrast, Permian alkaline granitoids, mostly located in the southern part of the Chinese Altai, reflect a post-subduction intraplate setting. The metamorphic evolution of the metasedimentary sequences shows an early MP-MT Barrovian event, followed by two Buchan events: LP-HT mid-Devonian (ca. 400–380 Ma) and UHT-HT Permian (ca. 300–270 Ma) cycles. The Barrovian metamorphism is linked to the formation of a regional sub-horizontal possibly Early Devonian fabric and the burial of the Cambro-Ordovician sequence. The Middle Devonian Buchan type event is related to intrusions of the syn-subduction granitoids during an extensional setting and followed by Late Devonian-Early Carboniferous NE-SW trending upright folding and crustal scale doming during a general NW-SE shortening, responsible for the exhumation of the hot lower crust. The last Permian deformation formed NW-SE trending upright folds and vertical zones of deformation related to the extrusion of migmatites, anatectic granitoids and granulite rocks, and to the intrusions of gabbros and granites along the southern border of the Chinese Altai. Finally, the Permo-Triassic cooling and thrust systems affected the whole mountain range from ca. 265 to 230 Ma. In conclusion, the Chinese Altai represents different crustal levels of the lower, middle and upper orogenic crust of a single Cambro-Ordovician accretionary wedge, heterogeneously affected by the Devonian polyphase metamorphism and deformation followed by the Permian tectono-thermal reworking event related to the collision with the Junggar arc. It is the interference of Devonian and Permian upright folding events that formed vertical boundaries surrounding the variously exhumed and eroded crustal segments. Consequently, these crustal segments should not be regarded as individual suspect terranes.     

Regional geoelectric structure beneath Deccan Volcanic Province of the Indian subcontinent using magnetotellurics

Understanding deep continental structure and the seismotectonics of Deccan trap covered region has attained greater importance in recent years. For imaging the deep crustal structure, magnetotelluric (MT) investigations have been carried out along three long profiles viz. Guhagarh–Sangole (GS), Sangole–Partur (SP), Edlabad–Khandwa (EK) and one short profile along Nanasi–Mokhad (NM). The results of GS, SP and NM profiles show that the traps lie directly over high resistive basement with thin inter-trappean sediments, where large thickness of sediments, of the order of 1.5–2.0 km, has been delineated along EK profile across Narmada–Son–Lineament zone. The basement is intersected by faults/fractures, which are clearly delineated as narrow steep conducting features at a few locations. The conducting features delineated along SP profile are also seen from the results of aeromagnetic anomalies. Towards the southern part of the profile, these features are spatially correlated with Kurduwadi rift proposed earlier from gravity studies. Apart from the Kurduwadi rift extending to deep crustal levels, the present study indicates additional conductive features in the basement. The variation in the resistivity along GS profile can be attributed to crustal block structure in Koyna region. Similar block structure is also seen along NM profile.Deccan trap thickness, based on various geophysical methods, varies gradually from 1.8 km towards west to 0.3 km towards the east. While this is the general trend, a sharp variation in the thickness of trap is observed near Koyna. The resistivity of the trap is more (150–200 Ω m) towards the west as compared to the east (50–60 Ω m) indicating more compact or denser nature for the basalt towards west. The upper crust is highly resistive (5000–10,000 Ω m), and the lower crust is moderately resistive (500–1000 Ω m). In the present study, seismotectonics of the region is discussed based on the regional geoelectrical structure with lateral variation in the resistivity of the basement and presence of anomalous conductors in the crust.