Active tectonism in the central Alps: contrasting stress regimes north and south of the Rhone Valley

An integrated interpretation of seismicity, fault plane solutions and deep seismic reflection data suggests that the NE–SW to NW–SE trending Rhone–Simplon fault zone and the gently S-dipping basal Penninic thrust separate fundamentally different stress regimes in the western Swiss Alps. North of the Rhone-Simplon fault zone, strike-slip earthquakes on steep-dipping faults within the Helvetic nappes are a consequence of regional NW–SE compression and NE–SW extension. To the south, vertical maximum stress and N–S extension are responsible for normal mechanism earthquakes that occur entirely within the Penninic nappes above the basal Penninic thrust. Such normal faulting likely results from extension associated with southward movements (collapse) of the Penninic nappes and/or continued uplift and relative northward displacements of the underlying Alpine massifs. Geological mapping and fission-track dating suggest that the two distinct stress regimes have controlled tectonism in the western Swiss Alps since at least the Neogene.     

Horizontal contraction or horizontal extension? Heterogeneous Late Eocene and early Oligocene general shearing during blueschist and greenschist facies metamorphism at the Pennine-Austroalpine boundary zone in the Western Alps

Mylonitic structures related to two orogenic events are described from the upper and lower contacts of the Combin zone and the immediately overlying upper Austroalpine Dent Blanche nappe/Mont Mary klippe and the directly underlying lower Austroalpine Etirol-Levaz slice. The first event, Late Eocene in age, commenced during blueschist facies P-T conditions, but pre-dated the peak of subsequent greenschist facies overprint. The second event, Early Oligocene in age, took place during retrograde greenschist facies conditions. Most sense of shear indicators associated with the retrograde mylonites indicate top SE shearing, but subordinate top NW displacing shear sense indicators have also been mapped. Mylonitic top SE shearing appears to be restricted to the Combin zone and its upper and lower contacts. Within the Dent Blanche nappe and Mont Mary klippe and at the base of the Etirol-Levaz slice, structures were observed which developed during blueschist/greenschist facies conditions and are, in conjunction with the P-T-t history of these rocks, inferred to be older. Associated kinematic data indicate a top NW shear sense. Comparable blueschist/greenschist facies shear sense indicators have not been observed in the Combin zone. Nonetheless, the foliation in the Combin zone shows a progressive evolution from blueschist facies to greenschist facies to retrograde greenschist facies conditions. This indicates that the Combin zone and the immediately over- and underlying Austroalpine units shared a common tectono-metamorphic evolution since the Late Eocene. Finite strain data reveal oblate strain fabrics, which are thought to result from a true flattening strain geometry. Flow path modelling reveals a general non-coaxial deformation régime and corroborates significant departures from a simple shear deformation. In the study area, mylonitic top SE shearing in the Combin zone is attributed to Early Oligocene backfolding and backthrusting of the Mischabel phase. Temperature-time curves suggest slight reheating in the Monte Rosa nappe underneath and cooling in the Dent Blanche nappe above the Combin zone, hence confirming a thrust interpretation for this event. The top NW displacing structures are thought to result from Late Eocene emplacement of the Dent Blanche nappe and the Combin zone onto the Middle Pennine Barrhorn series along the Combin fault. As related structures initiated during mildly blueschist facies conditions in the Dent Blanche nappe and the underlying Combin zone and both were emplaced together onto the greenschist facial Barrhorn series, it is concluded that the structures developed as the nappes moved upward relative to the earth's surface. Thus the Combin fault is regarded as a thrust. The geometry of this structure indicates that the Combin fault is an out of sequence thrust that locally cut down section. Hence, top NW out of sequence thrusting caused local thinning of the metamorphic/structural section in association with horizontal shortening. Out of sequence thrusts cutting down section, and back-thrusts, offer the possibility of explaining the pronounced break in the grade of metamorphism across the Combin fault, i.e. the contact between the eclogite facial Zermatt-Saas zone and the overlying lower grade Combin zone, by contractional deformation.     

The Louzidian Normal Fault near Chifeng,Inner Mongolia: Master Fault of a Quasi-Metamorphic Core Complex

A special metamorphic core complex underlain by a low-angle strike-slip ductile shear zone is present near Chifeng in eastern Inner Mongolia, northern China. The geology of the study area is similar to that of several Cordilleran metamorphic core complexes, but contrasts in significant ways as well. A major ESE-dipping normal fault, the Louzidian Range frontal fault, formed during Late Cretaceous extension. This fault separates a crystalline footwall locally containing mylonitic basement gneisses and granitic rocks (0 to >3 km thick) from a non-metamorphic hanging wall that is distended by normal faults. However, the shear sense of the underlying mylonitic shear zone, a low-angle strike-slip zone, is not compatible with the Louzidian fault. It may be related to a pre-Cretaceous regional sinistral strike-slip event rather than the Late Cretaceous regional crustal extension common throughout eastern China. Pre-existing mylonitic fabric anisotropy appears to have controlled the development of the Louzidian normal fault. Chloritic breccias locally developed along the fault indicate that it cut deeply into the crust of northern China.     

High-pressure–low-temperature metamorphism and deformation in the Bündnerschiefer of the Engadine window: implications for the regional evolution of the eastern Central Alps

A study of the metamorphic and tectonic evolution of the Bündnerschiefer of the Engadine window shows that the individual nappes have been thinned by a large amount and that extension was active during and soon after nappe stacking.
Based on contrasting P–T  histories the Penninic Bündnerschiefer can be divided in two major units bounded by a horizontal contact. The lower (Mundin) unit shows typical high- P /low- T  parageneses in metapelites (Mg-carpholite) and in metabasites (glaucophane); metamorphic conditions are estimated around 12  kbar, 375  °C. The upper (Arina) unit contains no specific high- P minerals; metamorphic conditions are estimated around 7  kbar, 325  °C. A minimum pressure gap of 5  kbar is thus observed. The contact between the two units is marked by a mappable normal shear zone with top-to-the-north-west sense of shear. Near the shear zone, fresh carpholite fibres trend parallel to the regional stretching lineation, implying that the detachment is an early structure active from the depth of stability of the carpholite and persisting during subsequent exhumation. The good preservation of carpholite and the absence of retrograde chloritoid below the shear zone show that exhumation occurred along a cooling path, whereas the deeper units are exhumed along an isothermal path. Exhumation probably occurred during convergence and further nappe stacking during the earlier Eocene. These results suggest that pre-collisional tectonic thinning of the Penninic oceanic units may be more widespread and significant than generally recognized.
     

Footwall dip of a core complex detachment fault: thermobarometric constraints from the northern Snake Range (Basin and Range,USA)

Low‐angle detachment faults are common features in areas of large‐scale continental extension and are typically associated with metamorphic core complexes, where they separate upper plate brittle extension from lower plate ductile stretching and metamorphism. In many core complexes, the footwall rocks have been exhumed from middle to lower crustal depths, leading to considerable debate about the relationship between hangingwall and footwall rocks, and the role that detachment faults play in footwall exhumation. Here, garnet–biotite thermometry and garnet–muscovite–biotite–plagioclase barometry results are presented, together with garnet and zircon geochronology data, from seven locations within metapelitic rocks in the footwall of the northern Snake Range décollement (NSRD). These locations lie both parallel and normal to the direction of footwall transport to constrain the pre‐exhumation geometry of the footwall. To determine P–T gradients precisely within the footwall, the ΔPT method of Worley & Powell (2000) has been employed, which minimizes the contribution of systematic uncertainties to thermobarometric calculations. The results show that footwall rocks reached pressures of 6–8 kbar and temperatures of 500–650 °C, equivalent to burial depths of 23–30 km. Burial depth remains constant in the WNW–ESE direction of footwall transport, but increases from south to north. The lack of a burial gradient in the direction of footwall transport implies that the footwall rocks, which today define a sub‐horizontal datum in the direction of fault transport, also defined a sub‐horizontal datum at depth in Late Cretaceous time. This suggests that the footwall was not tilted about the normal to the fault transport direction during exhumation, and hence that the NSRD did not form as a low‐angle normal fault cutting down through the lower crust. Instead, the following evolution for the northern Snake Range footwall is proposed. (i) Mesozoic contraction caused substantial crustal thickening by duplication and folding of the miogeoclinal sequence, accompanied by upper greenschist to amphibolite facies metamorphism. (ii) About half of the total exhumation was accomplished by roughly coaxial stretching and thinning in Late Cretaceous to Early Tertiary time, accompanied by retrogression and mylonitic deformation. (iii) The footwall rocks were then ‘captured’ from the middle crust along a moderately dipping NSRD that soled into the middle crust with a rolling‐hinge geometry at both upper and lower terminations.     

Geochemical evidence for the nature of the crust beneath the eastern North Penninic basin of the Mesozoic Tethys ocean

The North Penninic basin was a subbasin in the northern part of the Mesozoic Tethys ocean. Its significance within the framework of this ocean is controversial because it is not clear whether it was underlain by thinned continental or oceanic crust. Remnants of the eastern North Penninic basin are preserved in the Alps of eastern Switzerland (Grisons) as low metamorphic "Bündnerschiefer" sediments and associated basaltic rocks which formed approximately 140–170 Ma ago (Misox Bündnerschiefer zone, Middle Jurassic to Early Cretaceous). Nb/U, Zr/Nb, and Y/Nb ratios, as well as Nd–Sr isotopic and REE data of most of the metabasalts point to a depleted MORB-type mantle origin. They have been contaminated by magmatic assimilation of Bündnerschiefer sediments and by exchange with seawater, but do not prove the existence of a subcontinental lithospheric mantle or continental crust beneath the North Penninic basin. This suggests that the studied part of the North Penninic realm was underlain by oceanic crust. Only the metabasalts from two melange zones (Vals and Grava melanges) show a more important contamination by crustal material. Since this type of contamination cannot be observed in the other tectonic units, we suggest that its occurrence is related to melange formation during the subduction of the North Penninic basin in the Tertiary. The North Penninic basin was probably, despite the occurrence of oceanic crust, smaller than the South Penninic ocean where the presence of oceanic crust is well established. Modern analogues for the North Penninic basin could be the transitional zone of the Red Sea or the pull-apart basins of the southernmost Gulf of California where local patches of oceanic crust with effusive volcanism have been described.     

Kinematic reworking and exhumation within the convergent Alpine Orogen

Kinematic data from the internal zones of the Western Alps indicate both top-to-SE and top-to-NW shearing during synkinematic greenschist facies recrystallisation. Rb/Sr data from white micas from different kinematic domains record a range of ages that does not represent closure through a single thermal event but reflects the variable timing of synkinematic mica recrystallisation at temperatures between 300 and 450 °C. The data indicate an initial phase of accretion and foreland-directed thrusting at ca. 60 Ma followed by almost complete reworking of thrust-related deformation by SE-directed shearing. This deformation is localised within oceanic units of the Combin Zone and the base of the overlying Austroalpine basement, and forms a regional scale shear zone that can be traced for almost 50 km perpendicular to strike. The timing of deformation in this shear zone spans 9 Ma from 45 to 36 Ma. The SE-directed shear leads to local structures that cut upwards in the transport direction with respect to tectonic stratigraphy, and such structures have been interpreted in the past as backthrusts in response to ongoing Alpine convergence. However, on a regional scale, the top-to-SE deformation is related to crustal extension, not shortening, and is coincident with exhumation of eclogites in its footwall. During this extension phase, deformation within the shear zone migrated both spatially and temporally giving rise to domains of older shear zone fabrics intercalated with zones of localised reworking. Top-NW kinematics preserved within the Combin Zone show a range of ages. The oldest (48 Ma) may reflect the final stages of emplacement of Austroalpine Units above Piemonte oceanic rocks prior to the onset of extension. However, much of the top-to-NW deformation took place over the period of extension and may reflect either continuing or episodic convergence or tectonic thinning of the shear zone.⁴⁰Ar/³⁹Ar data from the region are complicated due to the widespread occurrence of excess ⁴⁰Ar in eclogite facies micas and partial Ar loss during Alpine heating. Reliable ages from both eclogite and greenschist facies micas indicate cooling ages in different tectonic units of between 32 and 40 Ma. These ages are slightly younger than Rb/Sr deformation ages and suggest that cooling below ca. 350 °C occurred after juxtaposition of the units by SE-directed extensional deformation.Our data indicate a complex kinematic history involving both crustal shortening and extension within the internal zones of the Alpine Orogen. To constrain the palaeogeographic and geodynamic evolution of the Alps requires that these data be integrated with data from the more external zones of the orogen. Complexity such as that described is unlikely to be restricted to the Western Alps and spatially and temporally variable kinematic data are probably the norm in convergent orogens. Recognising such features is fundamental to the correct tectonic interpretation of both modern and ancient orogens.     

Thermal structure and metamorphic evolution of the Piemont-Ligurian metasediments in the northern Western Alps

In the Western Alps, the Piemont-Ligurian oceanic domain records blueschist to eclogite metamorphic conditions during the Alpine orogeny. This domain is classically divided into two “zones” (Combin and Zermatt-Saas), with contrasting metamorphic evolution, and separated tectonically by the Combin fault. This study presents new metamorphic and temperature (RSCM thermometry) data obtained in Piemont-Ligurian metasediments and proposes a reevaluation of the P–T evolution of this domain. In the upper unit (or “Combin zone”) temperatures are in the range of 420–530 °C, with an increase of temperature from upper to lower structural levels. Petrological evidences show that these temperatures are related to the retrograde path and to deformation at greenschist metamorphic conditions. This highlights heating during exhumation of HP metamorphic rocks. In the lower unit (or “Zermatt-Saas zone”), temperatures are very homogeneous in the range of 500–540 °C. This shows almost continuous downward temperature increase in the Piemont-Ligurian domain. The observed thermal structure is interpreted as the result of the upper and lower unit juxtaposition along shear zones at a temperature of ~500 °C during the Middle Eocene. This juxtaposition probably occurred at shallow crustal levels (~15–20 km) within a subduction channel. We finally propose that the Piemont-Ligurian Domain should not be viewed as two distinct “zones”, but rather as a stack of several tectonic slices.     

Late Cretaceous, synorogenic, low-angle normal faulting along the Schlinig fault (Switzerland, Italy, Austria) and its significance for the tectonics of the Eastern Alps

The Schlinig fault at the western border of theÖtztal nappe (Eastern Alps), previously interpreted as a west-directed thrust, actually represents a Late Cretaceous, top-SE to -ESE normal fault, as indicated by sense-of-shear criteria found within cataclasites and greenschist-facies mylonites. Normal faulting postdated and offset an earlier, Cretaceous-age, west-directed thrust at the base of theÖtztal nappe. Shape fabric and crystallographic preferred orientation in completely recrystallized quartz layers in a mylonite from the Schlinig fault record a combination of (1) top-east-southeast simple shear during Late Cretaceous normal faulting, and (2) later north-northeast-directed shortening during the Early Tertiary, also recorded by open folds on the outcrop and map scale. Offset of the basal thrust of theÖtztal nappe across the Schlinig fault indicates a normal displacement of 17 km. The fault was initiated with a dip angle of 10° to 15° (low-angle normal fault). Domino-style extension of the competent Late Triassic Hauptdolomit in the footwall was kinematically linked to normal faulting.

The Schlinig fault belongs to a system of east- to southeast-dipping normal faults which accommodated severe stretching of the Alpine orogen during the Late Cretaceous. The slip direction of extensional faults often parallels the direction of earlier thrusting (top-W to top-NW), only the slip sense is reversed and the normal faults are slightly steeper than the thrusts. In the western Austroalpine nappes, extension started at about 80 Ma and was coeval with subduction of Piemont-Ligurian oceanic lithosphere and continental fragments farther west. The extensional episode led to the formation of Austroalpine Gosau basins with fluviatile to deep-marine sediments. West-directed rollback of an east-dipping Piemont-Ligurian subduction zone is proposed to have caused this stretching in the upper plate.     

The Arosa zone in Eastern Switzerland: oceanic, sedimentary burial, accretional and orogenic very low- to low grade patterns in a tectono-metamorphic mélange

In the area of Arosa?CDavos?CKlosters (Eastern Switzerland) the different tectonic elements of the Arosa zone mélange e.g. the Austroalpine fragments, the sedimentary cover of South Penninic ophiolite fragments, as well as the matrix (oceanic sediments and flysch rocks) show distinctively different metamorphic histories and also different climaxes (??peaks??) of Alpine metamorphism. This is shown by a wealth of Kübler-Index, vitrinite and bituminite reflectance measurements, and K-white mica b cell dimension data. At least six main metamorphic events can be recognized in the area of Arosa?CDavos?CKlosters: (1) A pre-orogenic event, typical for the Upper Austroalpine and for instance found in the sediments at the base of the Silvretta nappe but also in some tectonic fragments of the Arosa zone (Arosa zone mélange). (2) An epizonal oceanic metamorphism observed in the close vicinity of oceanic basement rocks units of the Arosa zone (South Penninic) is another pre-orogenic process. (3) A metamorphic overprint of the adjacent Lower Austroalpine nappes and structural fragments of the Lower Austroalpine in the Arosa zone. This metamorphic overprint is attributed to the orogenic metamorphic processes during the Late Cretaceous. (4) A thermal climax observed in the South Penninic sediments of the Arosa zone can be bracketed by the Austroalpine Late Cretaceous event (3) and the middle Tertiary event (5) in the Middle Penninic units and predates Oligocene extension of the ??Turba phase??. (6) North of Klosters, in the northern part of our study area, the entire tectonic pile from the North Penninic flysches to the Upper Austroalpine is strongly influenced by a late Tertiary high-grade diagenetic to low-anchizone event. In the Arosa zone mélange an individual orogenic metamorphic event is evidenced and gives a chance to resolve diagenetic?Cmetamorphic relations versus deformation. Six heating episodes in sedimentary rocks and seven deformation cycles can be distinguished. This is well explained by the propagation of the Alpine deformation front onto the foreland units. Flysches at the hanging wall of the mélange zone in the north of the study area (Walsertal zone) show data typical for low-grade diagenetic thermal conditions and are therefore sandwiched between higher metamorphic rock units and separated from theses units by a disconformity. The Arosa zone s.s., as defined in this paper, is characterised by metamorphic inversions in the hanging wall and at the footwall thrust, thus shows differences to the Walsertal zone in the north and to the Platta nappe in the south.     

Alpine geodynamic evolution of passive and active continental margin sequences in the Tauern Window (eastern Alps, Austria, Italy): a review

The Penninic oceanic sequence of the Glockner nappe and the foot-wall Penninic continental margin sequences exposed within the Tauern Window (eastern Alps) have been investigated in detail. Field data as well as structural and petrological data have been combined with data from the literature in order to constrain the geodynamic evolution of these units. Volcanic and sedimentary sequences document the evolution from a stable continent that was formed subsequent to the Variscan orogeny, to its disintegration associated with subsidence and rifting in the Triassic and Jurassic, the formation of the Glockner oceanic basin and its consumption during the Upper Cretaceous and the Paleogene. These units are incorporated into a nappe stack that was formed during the collision between a Penninic Zentralgneis block in the north and a southern Austroalpine block. The Venediger nappe and the Storz nappe are characterized by metamorphic Jurassic shelf deposits (Hochstegen group) and Cretaceous flysch sediments (Kaserer and Murtörl groups), the Eclogite Zone and the Rote Wand–Modereck nappe comprise Permian to Triassic clastic sequences (Wustkogel quartzite) and remnants of platform carbonates (Seidlwinkl group) as well as Jurassic volcanoclastic material and rift sediments (Brennkogel facies), covered by Cretaceous flyschoid sequences. Nappe stacking was contemporaneous to and postdated subduction-related (high-pressure) eclogite and blueschist facies metamorphism. Emplacement of the eclogite-bearing units of the Eclogite zone and the Glockner nappe onto Penninic continental units (Zentralgneis block) occurred subsequent to eclogite facies metamorphism. The Eclogite zone, a former extended continental margin, was subsequently overridden by a pile of basement-cover nappes (Rote Wand–Modereck nappe) along a ductile out-of-sequence thrust. Low-angle normal faults that have developed during the Jurassic extensional phase might have been inverted during nappe emplacement.     

Tjörnes fracture zone. New and old seismic evidences for the link between the North Iceland rift zone and the Mid-Atlantic ridge

The Tjörnes facture zone (TFZ) connects the EW extension of the Mid-Atlantic ridge north of Iceland to the extension of the North volcanic zone (NVZ) of Iceland. Earthquakes up to magnitude 7 (Ms) can occur in TFZ, volcanic eruptions have been observed and large crustal deformations are expected in similar way as have been observed in the NVZ. Most of the zone is below ocean, which limits the historical information and geological observations. For studying the dynamics of the zone we must rely on interpretation and modelling based on seismic observations, especially on microearthquake observations for the last 10 years. In this paper we demonstrate how microearthquakes can be applied to map the details of the plate boundary, and how this information can be applied to find epicenters and fault planes of large historical earthquakes, also how seismic information can be applied in dynamic modelling and to infer spatial and temporal interplay in activity, and to enhance hazard assessment.     

The Rila-Pastra Normal Fault and multi-stage extensional unroofing in the Rila Mountains (SW Bulgaria)

The Rhodope Metamorphic Province represents the core of an Alpine orogen affected by strong syn- and postorogenic extension. We report evidence for multiple phases of extensional unroofing from the western border of the Rila Mountains in the lower Rila valley, SW Bulgaria. The most prominent structure is the Rila-Pastra Normal Fault (RPNF), a major extensional fault and shear zone of Eocene to Early Oligocene age. The fault zone includes, from base to top, mylonites, ultramylonites and cataclasites, indicating deformation under progressively decreasing temperature, from amphibolite-facies to low-temperature brittle deformation. It strikes E–W with a top-to-the-N-to NW-directed sense of shear. Basement rocks in the hanging wall and footwall both display amphibolite-facies conditions. The foliation of the hanging-wall gneisses, however, is discordantly cut by the fault, while the foliation of the footwall gneisses is seen to curve into parallelism with the fault when approaching it. Two ductile splays of the RPNF occur in the footwall, which are subparallel to the foliation of the surrounding gneisses and merge laterally into the mylonites of the main fault zone. The concordance between the foliation in the footwall and the RPNF suggests that deformation and cooling in the footwall occurred simultaneously with extensional shearing, while the hanging-wall gneisses had already been exhumed previously. The RPNF is associated with thick deposits of an Early Oligocene, syntectonic breccia on top of its hanging wall. Integrating our results with previous studies, we distinguish the following stages of extensional faulting: (1) Late Cretaceous NW–SE extension (Gabrov Dol Detachment), exhumation of the present day hanging wall of the RPNF; (2) Eocene to Early Oligocene NW–SE to N–S extension (RPNF); (3) Miocene to Pliocene E–W extension (Western Border Fault), formation of the Djerman Graben; (4) Holocene to recent N–S to NW–SE extension (Stob Fault), reactivating the SW part of the Western Border Fault.     

Earthquake focal mechanisms and stress orientations in the eastern Swiss Alps

This study presents an updated set of earthquake focal mechanisms in the Helvetic and Penninic/Austroalpine domains of the eastern Swiss Alps. In eight cases, based on high-precision relative hypocentre locations of events within individual earthquake sequences, it was possible to identify the active fault plane. Whereas the focal mechanisms in the Helvetic domain are mostly strike-slip, the Penninic/Austroalpine domain is dominated by normal-faulting mechanisms. Given this systematic difference in faulting style, an inversion for the stress field was performed separately for the two regions. The stress field in the Penninic/Austroalpine domain is characterized by extension oriented obliquely to the E–W strike of the orogen. Hence, the Penninic nappes, which were emplaced as large-scale compressional structures during the Alpine orogenesis, are now deforming in an extensional mode. This contrasts with the more compressional strike-slip regime in the Helvetic domain towards the northern Alpine front. Relative to the regional stress field seen in the northern Alpine foreland with a NNW–SSE compression and an ENE–WSW extension, the orientation of the least compressive stress in the Penninic/Austroalpine domain is rotated counter-clockwise by about 40°. Following earlier studies, the observed rotation of the orientation of the least compressive stress in the Penninic/Austroalpine region can be explained as the superposition of the regional stress field of the northern foreland and a uniaxial extensional stress perpendicular to the local trend of the Alpine mountain belt.     

Main Uralian Thrust and Main Uralian Normal Fault: non-extensional Palaeozoic high-P rock exhumation, oblique collision, and normal faulting in the Southern Urals

The crustal architecture of the Southern Urals is dominated by an orogenic wedge thrusted westward upon the subducted East European continental margin. The N–S trending wedge constitutes an antiformal stack composed mainly of the high-P Maksyutov Complex, the overlying Suvanyak Complex and the allochthonous synformal Zilair flysch further west. These tectono-metamorphic units are separated by tectonic contacts and record discontinously decreasing metamorphic conditions from bottom to top. In the east, the E-dipping Main Uralian Normal Fault cross-cuts the metamorphic footwall and juxtaposes the non metamorphic Magnitogorsk island arc. This syncollisional normal fault compensated crustal thickening and exhumation of the high-P rocks. Orogenic shortening was accommodated by the Main Uralian Thrust, a W-vergent crustal-scale shear zone at the base of the wedge. Geological investigations and reflection seismics (URSEIS '95) argue in favour of a geodynamic evolution integrating subduction and basal accretion of high-P rocks during sinistral oblique thrusting along the Main Uralian Thrust and coeval normal-faulting along the Main Uralian Normal Fault.     

The Sha’it–Nugrus shear zone separating Central and South Eastern Deserts,Egypt: A post-arc collision low-angle normal ductile shear zone

The northerly dipping Sha’it–Nugrus shear zone (SNSZ) is the boundary separating the Central Eastern Desert from the South Eastern Desert of Egypt. The hangingwall of this shear zone is composed of low-grade metavolcanics and ophiolitic nappes of the Central Eastern Desert, while the footwall consists of South Eastern Desert high-grade metapsammitic gneisses (Migif-Hafafit gneissic complex). The SNSZ is about 700 m thick and represents the shear foliated lower parts of the hangingwall and upper parts of the footwall. A significant part of the SNSZ has been truncated by a later normal fault along Wadi Sha’it, however the SNSZ is well-preserved along Wadi Nugrus. Features of the SNSZ include shear-related schistosity (termed Ss), mylonite zones, sheared syn-kinematic granitoid intrusions, diverse metasomatism and metamorphic effects (higher T overprinting of hangingwall lithologies and retrogression of footwall lithologies). Shear-sense indicators clearly show top-to-N or NW displacement sense. SNSZ structures overprint arc collision related nappe structures (～680 Ma) and are therefore post-arc collision. SNSZ syn-kinematic intrusives have been dated at ～600 Ma. The SNSZ is deformed (regionally and locally folded and thrust dissected) during later NE–SW compressive tectonism. The SNSZ had an originally approximately E–W strike, low-angle N-dip and a normal shear sense, making this an example of a low-angle normal ductile shear (LANF) or detachment fault. The steep NE dip of Ss foliations and low-pitching slip lineations along Wadi Nugrus are due to NW–SE folding of the SNSZ, and do not indicate a sinistral strike-slip shear zone. The normal shear sense activity is responsible for juxtaposing the low-grade Central Eastern Desert lithologies against South Eastern Desert gneisses. A displacement of 15–30 km is estimated on the SNSZ, which is comparable to LANF displacements in the Basin and Range province of the western USA. Frictional resistance along this shear was probably reduced by high magmatic fluid pressure and hydrothermal fluid pressure. The vastness and diversity of the hydrothermal activity along this shear zone is a characteristic of other LANFs in the Eastern Desert, e.g. at Gabal El-Sibai, and may be Gabal Meatiq. The SNSZ formed during the Neoproterozoic extensional tectonic phase of Eastern Desert that began ～600 Ma, and followed arc collision and NW-ward ejection of nappes.     

Evolution of the Large-scale Active Manisa Fault,Southwest Turkey: Implications on Fault Development and Regional Tectonics

This paper aims to illustrate and discuss mechanism(s) responsible for the growth and evolution of large-scale corrugated normal faults in southwest Turkey. We report spectacular exposures of normal fault surfaces as parts of the Manisa Fault - a ?50-km-long northeast-ward arched active fault that defines the northwestern edge of the Manisa graben, which is subsidiary to the Gediz Graben. The fault is a single through-going corrugated fault system with distinct along-strike bends. It follows NW direction for 15 km in the south, then bends into an approximately E-W direction in the northwest. The fault trace occurs at the base of topographic scarps and separates the Quaternary limestone scree and alluvium from the highly strained, massive bed-rock carbonates. The fault is exposed on continuous pristine slip surfaces, up to 60 m high. The observed surfaces are polished and ornamented by well-preserved various brittle structural features, such as slip-parallel striations, gutters and tool tracks, and numerous closely spaced extension fractures with straight or crescentic traces. The rocks both in the footwall and hanging-wall of the fault possess a well-developed fault rock stratigraphy made up, from structurally lowest to the top, of massive undeformed recrystallized limestone, a zone of cemented breccia sheets, corrugated polished slip planes, and first brecciated, then unbrecciated scree.

The observed slip surfaces of the Manisa Fault contain two sets of striations that suggest an early phase of sinistral strike-slip and a subsequent normal-slip movements. The first phase is attributed to: (i) approximately E-W-directed compression that commenced during either (?) Early-Middle Pliocene time or (ii) the current extensional tectonics and consequent modern graben formation in southwest Turkey that initiated during the Plio-Quaternary. During this period, the Manisa Fault was reactivated and it became a major segment. Stress inversion of fault slip data suggests that southwest Turkey has been experiencing multidirectional crustal extension, with components of approximately N-S, E-W, NE-SW and NW-SE extension. Following the reactivation, the inherited fault segments were connected to each other through interaction, linkage and amalgamation of previously discontinuous and overlapping smaller stepping adjacent faults. Linkage was via the formation of new connecting (breaching) fault(s) or by curved propagation of fault-tips. The result is a single through-going corrugated fault trace with distinct along-strike bends. The final geometry of the Manisa Fault is thus the combined result of reactivation and continuing interaction between previously discontinuous segmented fault traces.