库木库里背斜活动性初步研究

库木库里盆地位于青藏高原北缘,与柴达木盆地一山之隔,是二者的过渡地带,也是高原主体部分向NE扩展的前缘地区;现今构造表现为被3条大型活动构造带(走滑的阿尔金断裂带、东昆仑断裂带和逆冲的祁漫塔格褶皱逆冲系)所夹持。因此,该盆地对于研究青藏高原北缘的构造活动性、活动历史,探讨高原的扩展模式具有十分重要的意义。虽然库木库里盆地南、北两侧均发育活动性很强的大型走滑断裂,但是在盆地中央发育1条大型背斜,走向NWW-SEE,与祁漫塔格褶皱逆冲系和柴达木盆地内的褶皱构造走向一致,说明盆地目前遭受NNE向的挤压。通过对盆地地形横、纵剖面和阶地展布形态的分析,得出背斜有自西向东扩展变形的特征;野外调查和测年结果显示,背斜东段冰川融水形成了大型冰水扇,形成年龄为(87.09±2.31)~(102.4±3.7)ka,进而获得背斜东段自晚更新世以来平均隆升速率的最大值为(2.78±0.28)~(3.28±0.28)mm/a。库木库里盆地整体的活动性很强,在构造上与其北边的柴达木盆地类似,都受控于阿尔金断裂南侧的NNE向的区域挤压作用。     

THE SLIP RATE AND PALEOEARTHQUAKES OF THE YUMEN FAULT IN THE NORTHERN QILIAN MOUNTAINS SINCE THE LATE PLEISTOCENE

The Yumen Fault lies on the west segment of the north Qilian Fault belt and adjacent to the Altyn-Tagh Fault,in the north margin of the Tibet Plateau.The tectonic location of the Yumen fault is special,and the fault is the evidence of recent activity of the northward growth of Tibetan plateau.In recent twenty years,many researches show the activity of the Yumen Fault became stronger from the early Pleistocene to the Holocene.Because the Yumen Fault is a new active fault and fold belt in the Qilian orogenic belt in the north margin of the Tibet Plateau,it is important to ascertain its slip rate and the recurrence interval of paleoearthquakes since the Late Pleistocene.Using the satellite image interpretation of the Beida river terrace,the GPS measurement of alluvial fans in front of the Yumen Fault and the trench excavation on the fault scarps,two conclusions are obtained in this paper.(1) The vertical slip rate of the Yumen Fault is about 0.41~0.48mm/a in the Holocene and about 0.24~0.30mm/a in the last stage of the late Pleistocene.(2) Since the Holocene epoch,four paleoearthquakes,which happened respectively in 6.12~10.53ka,3.6~5.38ka,1.64~1.93ka and 0.63~1.64ka,ruptured the surface scarps of the Yumen Fault.Overall,the recurrence interval of the paleoseismic events shortens gradually and the activity of the Yumen Fault becomes stronger since the Holocene.Anther characteristic is that every paleoearthquake probably ruptured multiple fault scarps at the same time.     

DISTRIBUTION OF YANGJIA VILLAGE-YAODIAN SECTION OF WEIHE FAULT AND THE CHARACTERISTICS OF ITS LATE QUATERNARY ACTIVITY

The Yangjia Village-Yaodian segment of Weihe Fault, starting from Yangjia Village in the west, passing through Weijiaquan, Jinjiazhuang, Donger Village, Chenjiatai to Yaodian, occurs as a NE-striking fault dipping south with a total length of 33 kilometers. As a syn-depositional normal fault, it extends along the leading and trail edge of T₁, T₂ and T₃ terrace at the northern bank of Weihe River. Results of remote sensing interpretation, shallow seismic exploration, exploratory trench, and drilling show that the Yangjia Village-Yaodian section of Weihe Fault manifests as fault scarps, overlapping with the NE-extending terrace scarp at the northern bank of Weihe River. Weihe Fault broke the T₁ that can be distinguished on the shallow seismic profile and multiple profiles with broken signs from T₁ to the ground, which is the same with the cracks through the Han Tomb at the top of the exploratory trench in Yangjia Village. It shows that the fault may still be active from the late Pleistocene to Holocene. Through composite drilling section and the analysis of exploratory trench, there is no significant difference in activity between the Yangjia Village-Jinjiazhuang and Donger Village-Yaodian section. This segment has experienced a large displacement event since (46.0±3.3)ka BP, approximately 11.0~16.5m, with a vertical slip rate of 0.34~0.45mm/a. The most recent activity occurred approximately around 2.0ka BP. The left-step en echelon fracture zone at Jingjiazhuang separates this section into two minor ones, Yangjia Village-Jinjiazhuang section and Donger Villag-Yaodian section. Yangjia Village-Yaodian section in Weihe Fault and Yaodian-Zhangjiawan section which was found out in the Xi'an active fault detection and seismic risk assessment project can be combined into the Yangjia Village-Zhangjiawan section.     

NEW EVIDENCES OF HOLOCENE ACTIVITY IN THE JIANGSU SEGMENT OF ANQIU-JUXIAN FAULT OF THE TANLU FAULT ZONE

Anqiu-Juxian Fault is an important fault in the Tanlu fault zone, with the largest seismic risk, the most recent activity date and the most obvious surface traces. It is also the seismogenic fault of the Tancheng M8 1/2 earthquake in 1668. There are many different views about the southern termination location of surface rupture of the Tancheng earthquake and the Holocene activity in Jiangsu segment of this fault. Research on the latest activity time of the Jiangsu segment of Anqiu-Juxian Fault, particularly the termination location of surface rupture of the Tancheng earthquake, is of great significance to the assessment of its earthquake potential and seismic risk. Based on trench excavation on the Jiangsu segment of Anqiu-Juxian Fault, we discuss the time and characteristics of its latest activity. Multiple geological sections from southern Maling Mountain to Chonggang Mountain indicate that there was an ancient seismic event occurring in Holocene on the Jiangsu segment of Anqiu-Juxian Fault. We suggest the time of the latest seismic event is about(4.853±0.012)~(2.92±0.3)ka BP by dating results. The latest activity is characterized by thrust strike-slip faulting, with the maximum displacement of 1m. Combined with the fault rupture characteristics of each section, it is inferred that only one large-scale paleo-earthquake event occurred on the Jiangsu segment of Anqiu-Juxian Fault since the Holocene. The upper parts of the fault are covered by horizontal sand layers, not only on the trench in the west of Chonggang mountain but also on the trench in Hehuan Road in Suqian city, which indicates that the main part of the Jiangsu segment of Anqiu-Juxian Fault was probably not the surface rupture zone of the 1668 Tancheng M8 1/2 earthquake. In short, the Jiangsu segment of Anqiu-Juxian Fault has experienced many paleo-earthquake events since the late Pleistocene, with obvious activity during the Holocene. The seismic activities of the Jiangsu segment of Anqiu-Juxian Fault have the characteristics of large magnitude and low frequency. The Jiangsu segment of Anqiu-Juxian Fault has the deep tectonic and seismic-geological backgrounds of big earthquakes generation and should be highly valued by scientists.     

THE QUANTATIVE STUDY ON ACTIVITY OF DENGDENGSHAN-CHIJIACIWO FAULTS SINCE LATE QUATERNARY

The Dengdengshan and Chijiaciwo faults situate in the northeast flank of Kuantanshan uplift at the eastern terminal of Altyn Tagh fault zone, striking northwest as a whole and extending 19 kilometers and 6.5 kilometers for the Dengdengshan and Chijiaciwo Fault, respectively. Based on satellite image interpretation, trenching, faulted geomorphology surveying and samples dating etc., we researched the new active characteristics of the faults. Three-levels of geomorphic surfaces, i.e. the erosion rock platform, terrace I and terrace Ⅱ, could be found in the northeast side of Kuantanshan Mountain. The Dengdengshan Fault dislocated all geomorphic surfaces except terrace I, and the general height of scarp is about 1.5 meters, with the maximum reaching 2.6 meters. Three paleoseismic events are determined since late Pleistocene through trenching, and the total displacement of three events is about 2.7 meters, the average vertical dislocation of each event changed from 0.5 to 1.2 meters. By collecting age samples and dating, the event Ⅰ occurred about 5ka BP, event Ⅱ occurred about 20ka BP, and event Ⅲ occurred about 35ka BP. The recurrence interval is about 15ka BP; and the vertical slip rate since the late Pleistocene is about 0.04mm/a. The Chijiaciwo Fault, however, dislocated all three geomorphic surfaces, and the general scarp height is about 2.0 meters with the maximum up to 4.0 meters. Three paleoseismic events are determined since late Pleistocene through trenching, and the total displacement of three events is about 3.25 meters, the average vertical dislocation of each event changed from 0.75 to 1.5 meters, and the vertical slip rate since the late Pleistocene is about 0.06mm/a. Although the age constraint of paleoearthquakes on Chijiaciwo Fault is not as good as that of Dengdengshan Fault, the latest event on Chijiaciwo Fault is later than Dengdengshan Fault's. Furthermore, we infer that the recurrence interval of Chijiaciwo Fault is 15ka BP, which is close to that of Dengdengshan Fault. The latest event on Chijiaciwo Fault is later than the Dengdengshan Fault's, and the vertical displacement and the slip rate of a single event in late Quaternary are both larger than that of Dengdengshan Fault. Additionally, a 5-kilometer-long discontinuity segment exists between these two faults and is covered by Quaternary alluvial sand gravel. All these indicate that the activity of the Chijiaciwo Fault and Dengdengshan Fault has obvious segmentation feature. The size of Chijiaciwo Fault and Dengdengshan Fault are small, and the vertical slip rate of 0.04~0.06mm/a is far smaller than that of Qilianshan Fault and the NW-striking faults in Jiuxi Basin. All these indeicate that the tectonic deformation of this region is mainly concentrated on Hexi Corrider and the interior of Tibet Plateau, while the activties of Chijiaciwo and Dengdengshan faults are characterized by slow slip rate, long recurrence interval(more than 10ka)and slow tectonic deformation.     

LATE QUATERNARY FAULTED LANDFORMS AND FAULT ACTIVITY OF THE HUASHAN PIEDMONT FAULT

Based on the 1︰50000 active fault geological mapping, combining with high-precision remote imaging, field geological investigation and dating technique, the paper investigates the stratum, topography and faulted landforms of the Huashan Piedmont Fault. Research shows that the Huashan Piedmont Fault can be divided into Lantian to Huaxian section (the west section), Huaxian to Huayin section (the middle section) and Huayin to Lingbao section (the east section) according to the respective different fault activity. The fault in Lantian to Huaxian section is mainly contacted by loess and bedrock. Bedrock fault plane has already become unsmooth and mirror surfaces or striations can not be seen due to the erosion of running water and wind. 10~20m high fault scarps can be seen ahead of mountain in the north section near Mayu gully and Qiaoyu gully, and we can see Malan loess faulted profiles in some gully walls. In this section terraces are mainly composed of T₁ and T₂ which formed in the early stage of Holocene and late Pleistocene respectively. Field investigation shows that T₁ is continuous and T₂ is dislocated across the fault. These indicate that in this section the fault has been active in the late Pleistocene and its activity becomes weaker or no longer active after that. In the section between Huaxian and Huayin, neotectonics is very obvious, fault triangular facets are clearly visible and fault scarps are in linear distribution. Terrace T₁, T₂ and T₃ develop well on both sides of most gullies. Dating data shows that T₁ forms in 2~3ka BP, T₂ forms in 6~7ka BP, and T₃ forms in 60~70ka BP. All terraces are faulted in this section, combing with average ages and scarp heights of terraces, we calculate the average vertical slip rates during the period of T₃ to T₂, T₂ to T₁ and since the formation of T₁, which are 0.4mm/a, 1.1mm/a and 1.6mm/a, and among them, 1.1mm/a can roughly represent as the average vertical slip rate since the middle stage of Holocene. Fault has been active several times since the late period of late Pleistocene according to fault profiles, in addition, Tanyu west trench also reveals the dislocation of the culture layer of(0.31~0.27)a BP. 1~2m high scarps of floodplains which formed in(400~600)a BP can be seen at Shidiyu gully and Gouyu gully. In contrast with historical earthquake data, we consider that the faulted culture layer exposed by Tanyu west trench and the scarps of floodplains are the remains of Huanxian M_S8½ earthquake. The fault in Huayin to Lingbao section is also mainly contacted by loess and mountain bedrock. Malan loess faulted profiles can be seen at many river outlets of mountains. Terrace geomorphic feature is similar with that in the west section, T₁ is covered by thin incompact Holocene sand loam, and T₂ is covered by Malan loess. OSL dating shows that T₂ formed in the early to middle stage of late Pleistocene. Field investigation shows that T₁ is continuous and T₂ is dislocated across the fault. These also indicate that in this section fault was active in the late Pleistocene and its activity becomes weaker or no longer active since Holocene. According to this study combined with former researches, we incline to the view that the seismogenic structure of Huanxian M_S8½ earthquake is the Huashan Piedmont Fault and the Northern Margin Fault of Weinan Loess, as for whether there are other faults or not awaits further study.     

中甸-大具断裂南东段晚第四纪活动的地质地貌证据

中甸-大具断裂南东段位于哈巴和玉龙雪山北麓,属于川西北次级块体西南边界,断裂总体走向310°~320°,是一条重要的边界断裂。了解该断裂的活动性质、活动时代和滑动速率等对分析川西北次级块体运动,研究该断裂与玉龙雪山东麓断裂的交切关系等问题具有重要意义。文中基于1︰5万活动断层地质填图,对断裂沿线地层地貌、陡坎地貌、地表破裂、典型断层剖面以及河流阶地等进行了详细的研究。研究表明:1)中甸-大具断裂南东段按几何结构、断错地貌表现、断裂活动性可分为马家村—大具次级段和大具—大东次级段。2)通过野外地质调查发现,马家村—大具次级段断错了全新世冲洪积扇,形成了地表破裂,为全新世活动段;而大具—大东次级段虽然也断错了晚更新—全新世地层,但其断错规模及滑动速率均较小,由此认为其全新世以来活动较弱。3)通过分析断裂沿线断层陡坎、水平位错及地表破裂等地质地貌问题,认为马家村—大具次级段的活动性质为右旋走滑兼正断,其晚更新世以来的垂直滑动速率为0.4~0.8mm/a,水平滑动速率为1.5~2.4mm/a;大具—大东次级段以右旋走滑为主、正断为辅,其晚更新世晚期以来的垂直滑动速率为0.1mm/a。4)在大具盆地内发现的NW向地表破裂带的形成时代很年轻,不排除是1966年中甸6.4级地震或1996年丽江7.0级地震造成的地表破裂。     

NEW DISCOVERY OF RESHUI-TAOSTUO RIVER FAULT IN DULAN,QINGHAI PROVINCE AND ITS IMPLICATIONS

The 40km-long, NEE trending Reshui-Taostuo River Fault was found in the southern Dulan-Chaka highland by recent field investigation, which is a strike-slip fault with some normal component. DEM data was generated by small unmanned aerial vehicle(UAV)on key geomorphic units with resolution<0.05m. Based on the interpretation and field investigation, we get two conclusions:1)It is the first time to define the Reshui-Taostuo River Fault, and the fault is 40km long with a 6km-long surface rupture; 2)There are left-handed dislocations in the gullies and terraces cut by the fault. On the high-resolution DEM image obtained by UAV, the offsets are(9.3±0.5) m, (17.9±1.5) m, and(36.8±2) m, measured by topographic profile recovery of gullies. The recovery measurements of two terraces present that the horizontal offset of T₁/T₀ is(18.2±1.5) m and the T₂/T₁ is (35.8±2) m, which is consistent with the offsets from gullies. According to the historical earthquake records, a M5 3/4 earthquake on April 10, 1938 and a M_S5.0 earthquake on March 21, 1952 occurred at the eastern end of the surface rupture, which may be related to the activity of the fault. By checking the county records of Dulan and other relevant data, we find that there are no literature records about the two earthquakes, which is possibly due to the far distance to the epicenter at that time, the scarcity of population in Dulan, or that the earthquake occurred too long ago that led to losing its records. The southernmost ends of the Eastern Kunlun Fault and the Elashan Fault converge to form a wedge-shaped extruded fault block toward the northwest. The Dulan Basin, located at the end of the wedge-shaped fault block, is affected by regional NE and SW principal compressive stress and the shear stress of the two boundary faults. The Dulan Basin experienced a complex deformation process of compression accompanying with extension. In the process of extrusion, the specific form of extension is the strike-slip faults at each side of the wedge, and there is indeed a north-east and south-west compression between the two controlling wedge-shaped fault block boundary faults, the Eastern Kunlun and Elashan Faults. The inferred mechanism of triangular wedge extrusion deformation in this area is quite different from the pure rigid extrusion model. Therefore, Dulan Basin is a wedge-shaped block sandwiched between the two large-scale strike-slip faults. Due to the compression of the northeast and southwest directions of the region, the peripheral faults of the Dulan Basin form a series of southeast converging plume thrust faults on the northeast edge of the basin near the Elashan Fault, which are parallel to the Elashan Fault in morphology and may converge with the Elashan Fault in subsurface. The southern marginal fault of the Dulan Basin(Reshui-Taostuo River Fault)near the Eastern Kunlun fault zone is jointly affected by the left-lateral strike-slip Eastern Kunlun Fault and the right-lateral strike-slip Elashan Fault, presenting a left-lateral strike-slip characteristic. Meanwhile, the wedge-shaped fault block extrudes to the northwest, causing local extension at the southeast end, and the fault shows the extensional deformation. These faults absorb or transform the shear stress in the northeastern margin of the Tibet Plateau. Therefore, our discovery of the Dulan Reshui-Taostuo River Fault provides important constraints for better understanding of the internal deformation mode and mechanism of the fault block in the northeastern Tibetan plateau. The strike of Reshui-Taostuo River Fault is different from the southern marginal fault of the Qaidam Basin. The Qaidam south marginal burial fault is the boundary fault between the Qaidam Basin and the East Kunlun structural belt, with a total length of ~500km. The geophysical data show that Qaidam south marginal burial fault forms at the boundary between the positive gravity anomaly of the southern East Kunlun structural belt and the negative gravity anomaly gradient zone of the northern Qaidam Basin, showing as a thrust fault towards the basin. The western segment of the fault was active at late Pleistocene, and the eastern segment near Dulan County was active at early-middle Pleistocene. The Reshui-Taostuo River Fault is characterized by sinistral strike-slip with a normal component. The field evidence indicates that the latest active period of this fault was Holocene, with a total length of only 40km. Neither remote sensing image interpretation nor field investigation indicate the fault extends further westward and intersects with the Qaidam south marginal burial fault. Moreover, it shows that its strike is relatively consistent with the East Kunlun fault zone in spatial distribution and has a certain angle with the burial fault in the southern margin of Qaidam Basin. Therefore, there is no structural connection between the Reshui-Taostuo River Fault and the Qaidam south marginal burial fault.     

THE MECHANISMS OF ARCUATE STRUCTURES ON THE SOUTH SIDE OF THE ALTYN TAGH FAULT AND THEIR TECTONIC IMPLICATIONS

The giant sinistral Altyn Tagh Fault(ATF)is the northern boundary of the Tibetan Plateau. It has been playing important role in adjusting the India-Eurasia collision and the tectonic evolution of the northeastern Tibetan Plateau. Knowledge of the evolution of the ATF can provide comprehensive understanding of the processes and mechanisms of the deformation of the Tibetan Plateau. However, its timing of commencement, amount of displacement and strike-slip rate, as well as the tectonic evolution of the region are still under debate. South of the ATF, there exist a series of oroclinal-like arcuate structures. Knowledge of whether these curved geometries represent original curvatures or the bending of originally straight/aligned geological units has significant tectonic implications for the evolution of the ATF. The Yingxiongling arcuate belt in the western Qaidam Basin and the northern Qaidam marginal thrust belt(NQMTB)north of the Qaidam Basin are the two typical arcuate thrust belts, where the former has a "7-types" structure, and the latter has a reverse "S-type" structure. Successive Cenozoic sediments are well exposed and magnetostratigraphically dated in both belts. Paleomagnetic declination has great advantage to reveal vertical-axis rotations of geological bodies since they become magnetized. Recently conducted paleomagnetic rotation studies in different parts of these two thrust belts revealed detailed Cenozoic rotation patterns and magnitudes of the region. By integrating these paleomagnetic rotation results with regional geometric features and lines of geological evidence, we propose that these two arcuate thrust belts were most likely caused by different rotations in different parts of these curvatures, due to the sinistral strike-slip faulting along the ATF, rather than originally curved ones. The Yingxiongling arcuate belt was shaped by the significant counterclockwise(CCW)rotations of its northwestern half(the Akatengnengshan anticline)near the ATF during~16~11Ma BP, while its southeastern half(the Youshashan anticline)had no significant rotations since at least~20Ma BP. The geometry of the NQMTB was developed firstly by remarkable clockwise rotations of its middle part during~33~14Ma BP, and later possibly CCW rotations of its northwestern part during the Middle to Late Miocene, similar to that of the northwestern part of the Yingxiongling arcuate belt. The characteristics of two-stage strike-slip evolution of the ATF since the Early Oligocene were enriched:1)During the Early Oligocene to mid-Miocene, fast strike-slip faulting along the ATF was proposed to accommodate the eastward extrusion of the northern Tibetan Plateau with its sinistral shear confined to the fault itself. While in the NQMTB and farther east area in the Qilian Shan, its sinistral shear was transferred to the interior of the plateau and was accommodated by deformation of differential crustal shortenings and block rotations in these regions. Thus, the displacement along the ATF west of the NQMTB is larger than that east of the NQMTB. 2)Since the mid-late Miocene, sinistral shear of the ATF was widespread distributed within the northern Tibetan Plateau, instead of concentrated to the fault itself. Its sinistral offsets were partially absorbed by the shortening deformation within the Qaidam Basin and the Qilian Shan, leading the offsets along the ATF decreasing to the east. With the sinistral frictional drag of blocks(the Tarim Basin and the Altyn Tagh Range)on the other side during the second stage evolution of the ATF, a transitional zone south of the ATF was likely developed by remarkable CCW rotations during the Middle to Late Miocene, which is probably confined to east of the Tula syncline. Combining the sinistral offsets along the ATF derived from the paleomagnetic rotations during the Early Oligocene to mid-late Miocene and that by piercing points since the Late Miocene, the post Oligocene strike-slip offsets were constrained as at least~350~430km for the reference in the western Qaidam Basin and~380~460km for the reference in the NQMTB, with an average slip rate of at least~10.6~13.9mm/a. The post Early Oligocene offsets are consistent with the widely accepted offsets of~300~500km obtained by piercing point analyses.     

PRELIMINARY STUDY OF PALEOEARTHQUAKES ON THE MIDDLE-EASTERN SEGMENT OF JINTA NANSHAN FAULT

Hexi Corridor is located at the northeastern margin of the Tibetan plateau. Series of late Quaternary active faults are developed in this area. Numerous strong earthquakes occurred in history and nowadays. Jinta Nanshan fault is one of the boundary faults between the Qinghai-Tibet block and the Alxa block. The fault starts from the northwest of Wutongdun in the west, passes through Changshan, Yuanyangchi reservoir, Dakouzi, and ends in the east of Hongdun. Because the Jinta Nanshan fault is a new active fault in this region, it is important to ascertain its paleoearthquakes since late Pleistocene for the earthquake risk study. Previous studies were carried out on the western part, such as field geomorphic investigation and trench excavation, which shows strong activity in Holocene on the western segment of Jinta Nanshan fault. On the basis of the above research, in this paper, we carried out satellite image interpretation, detailed investigation of faulted landforms and differential GPS survey for the whole fault. Focusing on the middle-eastern part, we studied paleoearthquakes through trench exploration on the Holocene alluvial fan and optical luminescence dating. The main results are as follows:Early Pleistocene to late Pleistocene alluvial strata are widely developed along the fault and Holocene sediment is only about tens of centimeters thick. The Jinta Nanshan fault shows long-lasting activity since late Quaternary and reveals tens of centimeters of the lowest scarp which illustrates new strong activity on the middle-east segment of this fault. Since late Pleistocene, 4 paleoearthquakes happened respectively before(15.16±1.29) ka, before(9.9±0.5) ka, about 6ka and after(3.5±0.4) ka, revealed by 4 trenches, of which 2 are laid on relatively thicker Holocene alluvial fan. Two events occurred since middle Holocene, and both ruptured the whole fault.     

山西罗云山山前断裂带中段龙祠-峪口全新世活动证据

通过断错地貌调查和探槽开挖,获得了临汾盆地西界罗云山山前断裂带龙祠-峪口段的最新活动信息:该段山前洪积扇后缘断断续续存在高2.5m、5.2m、8m左右的地表地貌陡坎;附近冲沟的Ⅰ级阶地热释光测年为距今7500a左右;在NW向的席坊沟内存在拔沟3.5m、8m、18m左右的3级阶地,与地貌陡坎有对应关系;席坊沟探槽揭示罗云...     

SURFACE TRACKS AND SLIP RATE OF THE FAULT ALONG THE SOUTHERN MARGIN OF THE WUWEI BASIN IN THE LATE QUATERNARY

The fault along the southern margin of the Wuwei Basin, located in the eastern Hexi Corridor, NW China, plays an important role in the thrust fault system in the northern Qilian Mountains. The activities of this fault resulted in the generation of the Gulang earthquake(M_S8.0) in 1927. Based on remote sensing image interpretation, geological and geomorphic observations in the field and ¹⁴C geochronological dating results, we conducted a detailed research on the geometry and kinematics of the fault. According to the discontinuous geometric distribution and variable strike directions, we divide this fault into 5 segments: Kangningqiao Fault(F₁), Nanyinghe Fault(F₂), Shangguchengcun-Zhangliugou Fault(F₃), Tajiazhuang Fault(F₄)and Yanjiazhuang Fault(F₅). Results indicate that this fault, with a total of 60km long trace at the surface, has been active since the late Pleistocene. It behaves predominantly as a thrust fault and is accompanied with a locally sinistral strike-slip component along the Nanyinghe Fault(F₂). Intensive activities of this fault in Holocene have caused extensive occurrence of dislocated landforms along its strike. Some measured displacements of the dislocated geologic or geomorphic units, combined with the ¹⁴C dating results, yield a vertical slip rate of (0.44±0.08)mm/a on this fault in Holocene, and a sinistral strike-slip rate of (1.43±0.08)mm/a on the Nanyinhhe Fault (F₂) in late Pleistocene.     

钻探揭示的黄河断裂北段活动性和滑动速率

黄河断裂是银川盆地内展布最长、切割最深的一条深大断裂,也是银川盆地的东边界。由于其北段呈隐伏状,因此,该段的活动性和滑动速率长期未知,影响了对盆地演化和地震危险性的认识。文中选择具有石油地震勘探基础的陶乐镇为研究场点,以人工浅层地震勘探结果为依据,在黄河断裂北段布设了一排钻孔联合剖面,并对标志层进行年代测试,获得了断裂的活动时代和滑动速率。结果表明,黄河断裂北段在晚更新世末期或全新世有过活动,在（28.16±0.12）ka BP 以来的累积位移为0.96m,晚第四纪以来的平均滑动速率为0.04mm/a,该值明显低于南段灵武断层（0.24mm/a）;尽管向下切割了莫霍面,黄河断裂晚第四纪活动强度和发震能力均要低于切割相对浅的贺兰山东麓断裂;黄河断裂可能在新生代之前已经强烈活动并深切莫霍面,新生代以来,银川盆地的构造活动迁移分解到以贺兰山东麓断裂为主的多条断裂之上,地壳双层伸展模型可解释银川盆地现今深浅部构造活动间的联系。     

EVIDENCE OF HOLOCENE ACTIVITY DISCOVERED IN ANHUI ZIYANGSHAN SEGMENT OF TANLU FAULT ZONE

Anqiu-Juxian Fault(F₅) is the latest active fault in the eastern graben of the middle segment of the Tanlu fault zone. In recent years, the research results of F₅ in Jiangsu Province are abundant, and it is found that Holocene activity is prevalent in different segments, and the movement pattern is dominated by dextral strike-slip and squeezing thrust. The Anhui segment and the Jiangsu segment of the Tan-Lu fault zone are bounded by the Huaihe River. Previous studies have not discussed the extension and activity of F₅ in the south of the Huaihe River in Anhui Province. This paper chooses the Ziyangshan segment of Tanlu fault zone in the south of the Huaihe River as the breakthrough point, which is consistent with the linear image feature of extension of F₅ in Jiangsu Province. Through the remote sensing image interpretation, geological and geomorphological investigation and trench excavation, we initially get the following understanding:(1)The linear structural features of the Ziyang segment are clear, and the fault is developed on the gentle slope of the Mesozoic red sandstone uplift along the Fushan-Ziyangshan, which is the southern extension of the Anqiu-Juxian Fault(F₅); (2)The excavation of the Zhuliu trench reveals that the late Pleistocene clastic layers are interrupted, and the late late Pleistocene to early Holocene black clay layers are filled along the fault to form black fault strips and black soil-filled wedges, indicating that the latest active age of the fault is early Holocene; (3)The excavation of Zhuliu trench reveals that there are at least 3 paleo-earthquake events since the Quaternary, the first paleo-seismic event is dated to the early and middle Quaternary, and the 2nd paleo-seismic event is 20.10~13.46ka BP, the age of the third paleo-seismic event is(10.15±0.05)~(8.16±0.05)ka BP. These results complement our understanding of the late Quaternary activity in the Anhui segment of the Tanlu fault zone, providing basic data for earthquake monitoring and seismic damage prevention in Anhui Province.     

2001年昆仑山口西M_S 8.1地震前背景形变场的模拟研究

文中以东昆仑断裂带周围分布的27个GPS站点的地壳运动速率矢量为约束,利用半无限弹性空间三维断裂位错模型,反演了东昆仑断裂、柴达木盆地北缘断裂、玛尼-玉树断裂和玛尔盖茶卡断裂带在2001年昆仑山口西MS8.1地震之前的运动速率,并认为这些断裂带以反演出的运动速率错动所形成的形变场可以作为震前的背景地壳形变场。基于这一具有构造意义的背景速度场资料,计算了区域地壳应变率场和地震矩累积率场。结果表明,昆仑山口西地震前,东昆仑断裂的东西大滩段和玛尼-玉树断裂西段为该区域2个最显著的地震矩累积率高值区,其中东昆仑断裂的东西大滩段高值区为后来的昆仑山口西MS8.1地震的发震段     

DISCOVERY OF SURFACE RUPTURE ZONE IN JIUXI BASIN,GANSU PROVINCE

Qilian Shan-Hexi Corridor is located at the northeastern margin of Tibetan plateau. Series of late Quaternary active faults are developed in this region. A number of strong earthquakes even large earthquakes occurred in history and present-day. In the past, the study of active faults in the area was mostly concentrated in the northern margin fault zone of the Qilian Shan on the south side of the corridor, while the research on the interior and the north side of the corridor basin was relatively rare. We found a new fault scarp in the northern part of the Baiyanghe anticline in Jiuxi Basin in 2010. It is an earthquake surface rupture zone which has never been reported before. In this paper, we carried out palaeoearthquake trench analysis on the newly found earthquake surface rupture zone and textual research of relevant historical earthquakes data. According to the interpretation of aerial photo and satellite image and field investigation, we found the surface rupture has the length of about 5km. The rupture shows as an arc-shaped line and is preserved intact comparably. The lower terrace and the latest flood alluvial fan are offset in addition to modern gullies. By differential GPS measurement, the height of the scarp is about 0.5~0.7m in the latest alluvial fan and about 1.5m in the T₁ terrace. From the residual ruins along the earthquake rupture zone, we believe the surface rupture might be produced by an earthquake event occurring not long ago. In addition, the rupture zone locates in the area where the climate is dry and rainless and there are no human activities induced damages. These all provide an objective condition for the preservation of the rupture zone. The trench along the fault reveals that the surface rupture was formed about 1500 years ago, and another earthquake event might have happened before it. Based on the textural research on the historical earthquake data and the research degree in the area at present, we believe that the surface rupture is related to the Yumen earthquake in 365, Yumen Huihuipu earthquake in 1785 or another unrecorded historical earthquake event.     

PALEOSEISMOLOGY ON THE YEMAHE SEGMENT OF THE YEMAHE-DAXUESHAN FAULT REVEALED BY TRENCH STUDY

A series of NWW striking faults are obliquely intersected by the NEE striking Altyn Tagh fault zone in the western Qilian Mountains. These faults were mostly active in late Quaternary and play an important role in accommodating regional lateral extrusion by both reverse and sinistral slip. Detailed studies on late Quaternary activity, tectonic transformation, paleoseismology, and strain partitioning not only significantly affect our recognition on seismogenic mechanism and zones of potential large earthquakes, but also provide useful information for exploring tectonic deformation mechanism in the northern Tibetan plateau. The Danghenanshan Fault, Yemahe-Daxueshan fault, and Altyn Tagh Fault form a triplet junction point at southwest of Subei county. The Yemahe-Daxueshan fault is one important branch fault in the western Qilian Mountains that accommodated eastward decreasing slip of the Altyn Tagh Fault, which was active in late Holocene, with a length up to 170km. Based on geometry and late Quaternary activity, the Yemahe-Daxueshan fault was subdivided into 3 segments, i.e. the Subei fault, Yemahe fault and Daxueshan Fault. The Yemahe Fault has the most prominent appearance among them, and is dominated by left-lateral slip with a little normal component. The heights of fresh scarps on this fault are only several tens of centimeters. We dug 2 trenches at the Zhazhihu site, and cleaned and reinterpreted one trench of previous studies. Then we interpreted trench profiles and paleoseismic events, and collected ¹⁴C and Optical Stimulated Luminescence samples to constrain event ages. Finally, we determined 3 events on the Yemahe fault with ages(6 830±30) a BP-(6 280±40) a BP, (5 220±30) a BP, (2 010±30) a BP, respectively. The elapsed time of most recent earthquake is(2 010±30) years before present, which is very close to the recurrence interval, so the possibility of major earthquakes on the Yemahe fault is relatively large.     

STUDY ON PALEOEARTHQUAKES ALONG THE JINGHE SECTION OF BOLOKENU-AQIKEKUDUKE FAULT

The Bolokenu-Aqikekuduk fault zone(B-A Fault)is a 1 000km long right-lateral strike-slip active fault in the Tianshan Mountains. Its late Quaternary activity characteristics are helpful to understand the role of active strike-slip faults in regional compressional strain distribution and orogenic processes in the continental compression environment, as well as seismic hazard assessment. In this paper, research on the paleoearthquakes is carried out by remote sensing image interpretation, field investigation, trench excavation and Quaternary dating in the Jinghe section of B-A Fault. In this paper, two trenches were excavated on in the pluvial fans of Fan2b in the bulge and Fan3a in the fault scarp. The markers such as different strata, cracks and colluvial wedges in the trenches are identified and the age of sedimentation is determined by means of OSL dating for different strata. Four most recent paleoearthquakes on the B-A Fault are revealed in trench TC1 and three most recent paleoearthquakes are revealed in trench TC2. Only the latest event was constrained by the OSL age among the three events revealed in the trench TC2. Therefore, when establishing the recurrence of the paleoearthquakes, we mainly rely on the paleoearthquake events in trench TC1, which are labeled E1-E4 from oldest to youngest, and their dates are constrained to the following time ranges: E1(19.4±2.5)~(19.0±2.5)ka BP, E2(18.6±1.4)~(17.3±1.4)ka BP, E3(12.2±1.2)~(6.6±0.8)ka BP, and E4 6.9~6.2ka BP, respectively. The earthquake recurrence intervals are(1.2±0.5)ka, (8.7±3.0)ka and(2.8±3)ka, respectively. According to the sedimentation rate of the stratum, it can be judged that there is a sedimentary discontinuity between the paleoearthquakes E2 and E3, and the paleoearthquake events between E2 and E3 may not be recorded by the stratum. Ignoring the sedimentary discontinuous strata and the earthquakes occurring during the sedimentary discontinuity, the earthquake recurrence interval of the Jinghe section of B-A Fault is ~1~3ka. This is consistent with the earthquake recurrence interval(~2ka)calculated from the slip rate and the minimum displacement. The elapsed time of the latest paleoearthquake recorded in the trench is ~6.9~6.2ka BP. The magnitude of the latest event defined by the single event displacement on the fault is ~M_W7.4, and a longer earthquake elapsed time indicates the higher seismic risk of the B-A Fault.     

卡兹克阿尔特断裂带活动特征

卡兹克阿尔特断裂带是帕米尔和天山新生代造山带间一个重要的活动构造边界,通过对其活动构造特征的详细地质调查和大比例尺填图,可将卡兹克阿尔特断裂带进一步划分为吉勒格由特断裂带、乌恰地震断裂带和木什断裂带3段.吉勒格由特断裂带的地表破裂为一系列的断层陡坎和偏转的冲积扇,经过别尔托阔依河出山口处时,切割了T1至T3堆积阶地.断裂带在T1、T2和T3阶地的断层陡坎高度分别为0.67m、3.90m和36.50m.对采自T2阶地顶部和底部的粉砂样品进行光释光测年,测定的初步结果分别为8900aBP和10500aBP,因此对T3、T2阶地以来的滑动速率估计分别约为3.5mm/a、0.8mm/a.断裂的前缘开挖的探槽揭示出全新世以来有4次古地震活动.乌恰地震带主要切割克兹勒苏河的T3阶地后缘,沿断裂带分布有大小不等的断塞塘和断层陡坎.1985年8月23日在乌恰地震带上发生Ms7.4地震,地震最大位错为1.5m.根据断层陡坎计算出断裂的滑动速率约为0.54mm/a.卡帕河的东岸探槽同样揭示出有4次古地震活动.在乌恰地震带的东端,木什断裂带地表长度约6km,由数十条左阶排列的反向断层陡坎(坡向北)组成,沿这些断坎多处可见冲沟被断错,横跨断层陡坎的探槽揭示出3次古地震活动.     

2012年6月24日宁蒗-盐源MS5.7地震发震构造刍议

2012年6月24日宁蒗-盐源M_S5.7地震,位于丽江-小金河断裂西北30km。区域范围内历史上地震频繁,为滇西北地震多发区。震区断裂构造复杂,主要发育NW向、NE向2组断裂,呈棋盘格式展布。经野外实地考察,震中附近发育NW向永宁断裂和NE向日古鲁-岩瓦断裂2条晚更新世活动断裂。永宁断裂由温泉断层、永宁断层和阿拉凹断层组成。在卫星影像上线性特征清晰,断层地貌明显。断裂对永宁、泸沽湖第四纪盆地具有严格的控制作用,沿线多处发育温泉。前所河的多条支流顺断层发育,八七—海衣角一带、日古鲁东山厝附近,多处河流右旋位错。阿拉凹一带断错T₂阶地上更新统沉积,被错地层最新年龄(TL)为(21.19±1.80)ka,是一条以右旋走滑兼正断性质的晚更新世活动断层。日古鲁—岩瓦断裂对岩瓦、日古鲁、利家咀等古近纪、新近纪盆地和永宁第四纪盆地有着明显的控制作用,断错中更新世和上更新世地层。中挖都—利家咀一带,有多条小溪呈现出同步左旋位错特征。断裂在晚更新世有着明显的活动迹象,以左旋走滑运动为主。据震源机制解结果,此次地震为正断兼右旋走滑型地震,NW向节面产状与永宁断裂基本吻合,地震破裂型式与永宁断裂运动学特征一致。地震烈度长轴方向、Ⅷ度烈度异常点线性分布以及构造地裂缝方向均与永宁断裂走向一致。分析认为,永宁断裂为此次地震的发震构造。此外,1996年丽江7.0级地震、1976年中甸5.5级地震以及本次5.7级地震,均具有明显的正倾滑分量。这些地震多分布在哈巴雪山和玉龙雪山新构造隆起周缘。根据区域地形条件分析,该地区的正断层运动作用很可能与地形巨大反差引起的重力势能有关。