Adsorption of uranyl onto ferric oxyhydroxides: Application of the surface complexation site-binding model

Uranyl adsorption was measured from aqueous electrolyte solutions onto well-characterized goethite, amorphous ferric oxyhydroxide, and hematite sols at 25°C. Adsorption was studied at a total uranyl concentration of 10^?5 M, (dissolved uranyl 10^?5 to 10^?8 M) as a function of solution pH, ionic strength and electrolyte concentrations, and of competing cations and carbonate complexing. Solution pHs ranged from 3 to 10 in 0.1 M NaNO₃ solutions containing up to 0.01 M NaHCO₃. All the iron oxide materials strongly adsorbed dissolved uranyl species at pHs above 5 to 6 with adsorption greatest onto amorphous ferric oxyhydroxide and least onto well crystallized specular hematite. The presence of Ca or Mg at the 10^?3 M level did not significantly affect uranyl adsorption. However, uranyl carbonate and hydroxy-carbonate complexing severely inhibited adsorption. The uranyl adsorption data measured in carbonate-free solutions was accurately modeled with the surface complexation-site binding model of Davis et al. (1978), assuming adsorption was chiefly of the UO₂OH⁺ and (UO₂)₃(OH)⁺₅, aqueous complexes. In modeling it was assumed that these complexes formed a monodentate UO₂OH⁺ surface complex, and a monodentate, bidentate or tridentate (UO₂)₃(OH)⁺₅surface complex. Of the latter, the bidentate surface complex is the most likely, based on crystallographic arguments. Modeling was less successful predicting uranyl adsorption in the presence of significant uranyl carbonate and hydroxy-carbonate complexing. It was necessary to slightly vary the intrinsic constants for adsorption of the di- and tricarbonate complexes in order to fit the uranyl adsorption data at total carbonate concentrations of 10^?2 and 10^?3 M.     

Surface complexation of U(VI) on goethite (α-FeOOH)

Sorption of U(VI) to goethite is a fundamental control on the mobility of uranium in soil and groundwater. Here, we investigated the sorption of U on goethite using EXAFS spectroscopy, batch sorption experiments and DFT calculations of the energetics and structures of possible surface complexes. Based on EXAFS spectra, it has previously been proposed that U(VI), as the uranyl cation , sorbs to Fe oxide hydroxide phases by forming a bidentate edge-sharing (E2) surface complex, >Fe(OH)₂UO₂(H₂O)_n. Here, we argue that this complex alone cannot account for the sorption capacity of goethite (α-FeOOH). Moreover, we show that all of the EXAFS signal attributed to the E2 complex can be accounted for by multiple scattering. We propose that the dominant surface complex in CO₂-free systems is a bidentate corner-sharing (C2) complex, (>FeOH)₂UO₂(H₂O)₃ which can form on the dominant {101} surface. However, in the presence of CO₂, we find an enhancement of UO₂ sorption at low pH and attribute this to a (>FeO)CO₂UO₂ ternary complex. With increasing pH, U(VI) desorbs by the formation of aqueous carbonate and hydroxyl complexes. However, this desorption is preceded by the formation of a second ternary surface complex (>FeOH)₂UO₂CO₃. The three proposed surface complexes, (>FeOH)₂UO₂(H₂O)₃, >FeOCO₂UO₂, and (>FeOH)₂UO₂CO₃ are consistent with EXAFS spectra. Using these complexes, we developed a surface complexation model for U on goethite with a 1-pK model for surface protonation, an extended Stern model for surface electrostatics and inclusion of all known UO₂-OH-CO₃ aqueous complexes in the current thermodynamic database. The model gives an excellent fit to our sorption experiments done in both ambient and reduced CO₂ environments at surface loadings of 0.02-2.0 wt% U.     

Uranyl adsorption onto montmorillonite: Evaluation of binding sites and carbonate complexation

The fate and transport of uranium in contaminated soils and sediments may be affected by adsorption onto the surface of minerals such as montmorillonite. Extended X-ray absorption fine structure (EXAFS) spectroscopy has been used to investigate the adsorption of uranyl (UO₂²⁺) onto Wyoming montmorillonite. At low pH (∼4) and low ionic strength (10⁻³ M), uranyl has an EXAFS spectrum indistinguishable from the aqueous uranyl cation, indicating binding via cation exchange. At near-neutral pH (∼7) and high ionic strength (1 M), the equatorial oxygen shell of uranyl is split, indicating inner-sphere binding to edge sites. Linear-combination fitting of the spectra of samples reacted under conditions where both types of binding are possible reveals that cation exchange at low ionic strengths on SWy-2 may be more important than predicted by past surface complexation models of U(VI) adsorption on related montmorillonites. Analysis of the binding site on the edges of montmorillonite suggests that U(VI) sorbs preferentially to [Fe(O,OH)₆] octahedral sites over [Al(O,OH)₆] sites. When bound to edge sites, U(VI) occurs as uranyl-carbonato ternary surface complexes in systems equilibrated with atmospheric CO₂. Polymeric surface complexes were not observed under any of the conditions studied. Current surface complexation models of uranyl sorption on clay minerals may need to be reevaluated to account for the possible increased importance of cation exchange reactions at low ionic strengths, the presence of reactive octahedral iron surface sites, and the formation of uranyl-carbonato ternary surface complexes. Considering the adsorption mechanisms observed in this study, future studies of U(VI) transport in the environment should consider how uranium retardation will be affected by changes in key solution parameters, such as pH, ionic strength, exchangeable cation composition, and the presence or absence of CO₂.     

Molecular characterization of uranium(VI) sorption complexes on iron(III)-rich acid mine water colloids

A mixing of metal-loaded acid mine drainage with shallow groundwater or surface waters usually initiates oxidation and/or hydrolysis of dissolved metals such as iron (Fe) and aluminum (Al). Colloidal particles may appear and agglomerate with increasing pH. Likewise chemical conditions may occur while flooding abandoned uranium mines. Here, the risk assessment of hazards requires reliable knowledge on the mobility of uranium (U). A flooding process was simulated at mesocosm scale by mixing U-contaminated acid mine water with near-neutral groundwater under oxic conditions. The mechanism of U-uptake by fresh precipitates and the molecular structure of U bonding were determined to estimate the mobility of U(VI). Analytical and spectroscopic methods such as Extended X-ray Absorption Fine-Structure (EXAFS) spectroscopy at the Fe K-edge and the U L_III-edge, and Attenuated Total Reflectance Fourier Transform Infrared (ATR-FTIR) spectroscopy were employed. The freshly formed precipitate was identified as colloidal two-line ferrihydrite. It removed U(VI) from solution by sorption processes, while surface precipitation or structural incorporation of U was not observed. EXAFS data suggest a mononuclear inner-sphere, edge-sharing complex of U(VI) with ferrihydrite in the absence of dissolved carbonate. By employing a novel EXAFS analysis method, Monte Carlo Target Transformation Factor Analysis, we could for the first time ascertain a 3-D configuration of this sorption complex without the necessity to invoke formation of a ternary complex. The configuration suggests a slightly tilted position of the adsorbed unit relative to the edge-sharing Fe(O, OH)₆ octahedra. In the presence of dissolved carbonate and at pH ∼8.0, a distal carbonate O-atom at ∼4.3 Å supports formation of ternary U(VI)-carbonato surface complexes. The occurrence of these complexes was also confirmed by ATR-FTIR. However, in slightly acidic conditions (pH 5-6) in equilibrium with atmospheric CO₂, the U(VI) sorption on ferrihydrite was dominated by the binary complex species Fe(O)₂UO₂, whereas ternary U(VI)-carbonato surface complexes were of minor relevance. While sulfate and silicate were also present in the mine water, they had no detectable influence on U(VI) surface complexation. Our experiments demonstrate that U(VI) forms stable inner-sphere sorption complexes even in the presence of carbonate and at slightly alkaline pH, conditions which previously have been assumed to greatly accelerate the mobility of U(VI) in aqueous environments. Depending on the concentrations of U(VI) and carbonate, the type of surface complexes may change from binary uranyl-ferrihydrite to ternary carbonato-uranyl-ferrihydrite complexes. These different binding mechanisms are likely to influence the binding stability and retention of U(VI) at the macroscopic level.     

Molecular simulation of the diffusion of uranyl carbonate species in aqueous solution

Potential-based molecular dynamics simulations of aqueous uranyl carbonate species (M_xUO₂(CO₃)_y^2+2x−2y with M = Mg, Ca, or Sr) were carried out to gain molecular-level insight into the hydration properties of these species. The simulation results were used to estimate the self-diffusion coefficients of these uranyl carbonate species, which often dominate uranyl speciation in groundwater systems. The diffusion coefficients obtained for the monoatomic alkaline-earth cations and polyatomic ions (uranyl, carbonate, and uranyl tri-carbonate) were compared with those calculated from the Stokes-Einstein (SE) equation and its variant formulation by Impey et al. (1983). Our results show that the equation of Impey et al. (1983), originally formulated for monovalent monoatomic ions, can be extended to divalent monoatomic ions, with some success in reproducing the absolute values and the overall trend determined from the molecular dynamics simulations, but not to polyatomic ions, for which the hydration shell is not spherically symmetrical. Despite the quantitative failure of both SE formulations, a plot of the diffusion coefficients of the uranyl carbonate complexes as a function of the inverse of the equivalent spherical radius showed that a general linear dependence is observed for these complexes as expected from the SE equation. The nature of the alkaline-earth cation in the uranyl carbonate complexes was not found to have a significant effect on the ion’s diffusion coefficient, which suggests that the use of a single diffusion coefficient for different alkaline-earth uranyl carbonate complexes in microscopic diffusion models is appropriate.The potential model reproduced well published quantum mechanical and experimental data of and of the individual constituent ions, and therefore is expected to offer reliable predictions of the structure of magnesium and strontium uranyl carbonate aqueous species, for which there is no structural data available to date. In addition, the interatomic distances reported for could help with the refinement of the interpretation of EXAFS data of these species, which is made difficult by the similar uranium-distant carbonate oxygen and uranium-calcium distances.An analysis of the dynamics of water exchange around the alkaline-earth cations revealed that the presence of the uranyl tri-carbonate molecule has a strong influence on the geometry of the cation’s first hydration shell, which, in turn, can considerably affect the water exchange kinetics depending on whether the imposed geometry matches that around the isolated alkaline-earth cation. This result shows that the alkaline-earth uranyl carbonate complexes have distinct water exchange dynamics, which may lead to different reactivities. Finally, significant changes in water residence time were also predicted when replacing carbonate for water ligands in the uranyl coordination shell.     

Chemical factors controlling the solubility of uraninite and their significance in the genesis of unconformity-related uranium deposits

A quantitative evaluation of the solubility of uraninite (UO₂) in aqueous solutions under hydrothermal conditions was made using previously reported thermodynamic data, so as to inquire into the controlling factors for Canadian unconformity-type ore mineralization as observed in the Athabasca uranium field. The results of solubility calculations suggest that uranyl carbonate complexes, such as UO₂CO ₃ ^o , UO₂(CO₃) ₂ ^2- and UO₂(CO₃) ₃ ^4- , predominate under relatively oxidizing and slightly acidic-alkaline conditions and that the uranyl chloride complex, UO₂Cl⁺ is dominant under acidic conditions. These features are predicted at temperatures up to 200 °C over reasonable ranges of CO₂ pressure (Pco₂) and salinity. Consequently, the physico-chemical parameters, such as oxygen activity (ao₂), and pH are regarded as the most important factors controlling uraninite solubility. Judging from the paragenetic sequences observed in most unconformity-type uranium deposits in the Athabasca district, appreciable decreases in the above variables are postulated to have occurred in the stage of principal uranium deposition. Such changes would be due to fluid-mixing phenomenon accompanied by the diagenetic-hydrothermal activity (Hoeve and Quirt 1987).     

The effect of calcium on aqueous uranium(VI) speciation and adsorption to ferrihydrite and quartz

Recent studies of uranium(VI) geochemistry have focused on the potentially important role of the aqueous species, CaUO₂(CO₃)₃²⁻ and Ca₂UO₂(CO₃)₃⁰(aq), on inhibition of microbial reduction and uranium(VI) aqueous speciation in contaminated groundwater. However, to our knowledge, there have been no direct studies of the effects of these species on U(VI) adsorption by mineral phases. The sorption of U(VI) on quartz and ferrihydrite was investigated in NaNO₃ solutions equilibrated with either ambient air (430 ppm CO₂) or 2% CO₂ in the presence of 0, 1.8, or 8.9 mM Ca²⁺. Under conditions where the Ca₂UO₂(CO₃)₃⁰(aq) species predominates U(VI) aqueous speciation, the presence of Ca in solution lowered U(VI) adsorption on quartz from 77% in the absence of Ca to 42% and 10% at Ca concentrations of 1.8 and 8.9 mM, respectively. U(VI) adsorption to ferrihydrite decreased from 83% in the absence of Ca to 57% in the presence of 1.8 mM Ca. Surface complexation model predictions that included the formation constant for aqueous Ca₂UO₂(CO₃)₃⁰(aq) accurately simulated the effect of Ca²⁺ on U(VI) sorption onto quartz and ferrihydrite within the thermodynamic uncertainty of the stability constant value. This study confirms that Ca²⁺ can have a significant impact on the aqueous speciation of U(VI), and consequently, on the sorption and mobility of U(VI) in aquifers.     

Towards a consistent geochemical model for prediction of uranium(VI) removal from groundwater by ferrihydrite

Uranium(VI), which is often elevated in granitoidic groundwaters, is known to adsorb strongly to Fe (hydr)oxides under certain conditions. This process can be used in water treatment to remove U(VI). To develop a consistent geochemical model for U(VI) adsorption to ferrihydrite, batch experiments were performed and previous data sets reviewed to optimize a set of surface complexation constants using the 3-plane CD-MUSIC model. To consider the effect of dissolved organic matter (DOM) on U(VI) speciation, new parameters for the Stockholm Humic Model (SHM) were optimized using previously published data. The model, which was constrained from available X-ray absorption fine structure (EXAFS) spectroscopy evidence, fitted the data well when the surface sites were divided into low- and high-affinity binding sites. Application of the model concept to other published data sets revealed differences in the reactivity of different ferrihydrites towards U(VI). Use of the optimized SHM parameters for U(VI)-DOM complexation showed that this process is important for U(VI) speciation at low pH. However in neutral to alkaline waters with substantial carbonate present, Ca–U–CO₃ complexes predominate. The calibrated geochemical model was used to simulate U(VI) adsorption to ferrihydrite for a hypothetical groundwater in the presence of several competitive ions. The results showed that U(VI) adsorption was strong between pH 5 and 8. Also near the calcite saturation limit, where U(VI) adsorption was weakest according to the model, the adsorption percentage was predicted to be >80%. Hence U(VI) adsorption to ferrihydrite-containing sorbents may be used as a method to bring down U(VI) concentrations to acceptable levels in groundwater.     

Biogenic nanoparticulate UO2: Synthesis, characterization, and factors affecting surface reactivity

The surface reactivity of biogenic, nanoparticulate UO₂ with respect to sorption of aqueous Zn(II) and particle annealing is different from that of bulk uraninite because of the presence of surface-associated organic matter on the biogenic UO₂. Synthesis of biogenic UO₂ was accomplished by reduction of aqueous uranyl ions, by Shewanella putrefaciens CN32, and the resulting nanoparticles were washed using one of two protocols: (1) to remove surface-associated organic matter and soluble uranyl species (NAUO2), or (2) to remove only soluble uranyl species (BIUO2). A suite of bulk and surface characterization techniques was used to examine bulk and biogenic, nanoparticulate UO₂ as a function of particle size and surface-associated organic matter. The N₂-BET surface areas of the two biogenic UO₂ samples following the washing procedures are 128.63 m² g⁻¹ (NAUO2) and 92.56 m² g⁻¹ (BIUO2), and the average particle sizes range from 5-10 nm based on TEM imaging. Electrophoretic mobility measurements indicate that the surface charge behavior of biogenic, nanoparticulate UO₂ (both NAUO2 and BIUO2) over the pH range 3-9 is the same as that of bulk. The U L_III-edge EXAFS spectra for biogenic UO₂ (both NAUO2 and BIUO2) were best fit with half the number of second-shell uranium neighbors compared to bulk uraninite, and no oxygen neighbors were detected beyond the first shell around U(IV) in the biogenic UO₂. At pH 7, sorption of Zn(II) onto both bulk uraninite and biogenic, nanoparticulate UO₂ is independent of electrolyte concentration, suggesting that Zn(II) sorption complexes are dominantly inner-sphere. The maximum surface area-normalized Zn(II) sorption loadings for the three substrates were 3.00 ± 0.20 μmol m⁻² UO₂ (bulk uraninite), 2.34 ± 0.12 μmol m⁻² UO₂ (NAUO2), and 2.57 ± 0.10 μmol m⁻² UO₂ (BIUO2). Fits of Zn K-edge EXAFS spectra for biogenic, nanoparticulate UO₂ indicate that Zn(II) sorption is dependent on the washing protocol. Zn-U pair correlations were observed at 2.8 ± 0.1 Å for NAUO2 and bulk uraninite; however, they were not observed for sample BIUO2. The derived Zn-U distance, coupled with an average Zn-O distance of 2.09 ± 0.02 Å, indicates that Zn(O,OH)₆ sorbs as bidentate, edge-sharing complexes to UO₈ polyhedra at the surface of NAUO2 nanoparticles and bulk uraninite, which is consistent with a Pauling bond-valence analysis. The absence of Zn-U pair correlations in sample BIUO2 suggests that Zn(II) binds preferentially to the organic matter coating rather than the UO₂ surface. Surface-associated organic matter on the biogenic UO₂ particles also inhibited particle annealing at 90 °C under anaerobic conditions. These results suggest that surface-associated organic matter decreases the reactivity of biogenic, nanoparticulate UO₂ surfaces relative to aqueous Zn(II) and possibly other environmental contaminants.     

Uranyl acetate speciation in aqueous solutions—an XAS study between 25°C and 250°C

Speciation of uranium (VI) in acetate solutions between 25 and 250°C, at pH values between 1.8 and 3.8 and acetate/uranium (Ac/U) ratios of 0.5 to 100 has been investigated using uranium L_III-edge X-ray absorption spectroscopy. With increasing pH the UO₂(Ac)₂⁰ species becomes more important than UO₂(Ac)⁺ species, which is predominant below pH 2. It remains the dominant species as pH is further increased to 3.8 at an Ac/U ratio of 20. Decrease in U-O_eq bond distance and coordination number with increasing solution age indicates that steric/kinetic factors are important and that equilibrium is attained slowly in this system with initial acetate coordination to the uranyl ion being monodentate or pseudo-bridging before slow conversion to bidentate chelation. Acetate coordination to the uranyl ion appears to decrease as temperature is increased from room temperature to ∼100°C before increasing in solutions of Ac/U > 2. For solutions where Ac/U ≤ 2 at pH 2.1, there is no evidence for uranyl acetate speciation at low temperatures, but at elevated temperature bidentate uranyl-acetate ion-pairing is evident. The existence of the uranyl acetate species in the temperature range 200 to 240°C demonstrates the importance of including acetate and other organic ligands in models of uranium transport at elevated temperatures.     

X-ray absorption fine structure determination of pH-dependent U-bacterial cell wall interactions

X-ray absorption fine structure (XAFS) measurements was used at the U L3-edge to directly determine the pH dependence of the cell wall functional groups responsible for the absorption of aqueous UO₂²⁺ to Bacillus subtilis from pH 1.67 to 4.80. Surface complexation modeling can be used to predict metal distributions in water-rock systems, and it has been used to quantify bacterial adsorption of metal cations. However, successful application of these models requires a detailed knowledge not only of the type of bacterial surface site involved in metal adsorption/desorption, but also of the binding geometry. Previous acid-base titrations of B. subtilis cells suggested that three surface functional group types are important on the cell wall; these groups have been postulated to correspond to carboxyl, phosphoryl, and hydroxyl sites. When the U(VI) adsorption to B. subtilis is measured, observed is a significant pH-independent absorption at low pH values (<3.0), ascribed to an interaction between the uranyl cation and a neutrally charged phosphoryl group on the cell wall. The present study provides independent quantitative constraints on the types of sites involved in uranyl binding to B. subtilis from pH 1.67 to 4.80. The XAFS results indicate that at extremely low pH (pH 1.67) UO₂²⁺ binds exclusively to phosphoryl functional groups on the cell wall, with an average distance between the U atom and the P atom of 3.64 ± 0.01 Å. This U-P distance indicates an inner-sphere complex with an oxygen atom shared between the UO₂²⁺ and the phosphoryl ligand. The P signal at extremely low pH value is consistent with the UO₂²⁺ binding to a protonated phosphoryl group, as previously ascribed. With increasing pH (3.22 and 4.80), UO₂²⁺ binds increasingly to bacterial surface carboxyl functional groups, with an average distance between the U atom and the C atom of 2.89 ± 0.02 Å. This U-C distance indicates an inner-sphere complex with two oxygen atoms shared between the UO₂²⁺ and the carboxyl ligand. The results of this XAFS study confirm the uranyl-bacterial surface speciation model.     

Goethite adsorption of Cu(II), Pb(II), Cd(II), and Zn(II) in the presence of sulfate: Properties of the ternary complex

Adsorption of Cu²⁺, Zn²⁺, Cd²⁺, and Pb²⁺ onto goethite is enhanced in the presence of sulfate. This effect, which has also been observed on ferrihydrite, is not predicted by the diffuse layer model (DLM) using adsorption constants derived from single sorbate systems. However, by including ternary surface complexes with the stoichiometry FeOHMSO₄, where FeOH is a surface adsorption site and M²⁺ is a cation, the effect of SO₄²⁻ on cation adsorption was accurately predicted for the range of cation, goethite and SO₄²⁻ concentrations studied. While the DLM does not provide direct molecular scale insights into adsorption reactions there are several properties of ternary complexes that are evident from examining trends in their formation constants. There is a linear relationship between ternary complex formation constants and cation adsorption constants, which is consistent with previous spectroscopic evidence indicating ternary complexes involve cation binding to the oxide surface. Comparing the data from this work to previous studies on ferrihydrite suggests that ternary complex formation on ferrihydrite involves complexes with the same or similar structure as those observed on goethite. In addition, it is evident that ternary complex formation constants are larger where there is a stronger metal-ligand interaction. This is also consistent with spectroscopic studies of goethite-M²⁺-SO₄²⁻ and phthalate systems showing surface species with metal-ligand bonding. Recommended values of ternary complex formation constants for use in SO₄-rich environments, such as acid mine drainage, are presented.     

Impact of Alkaline Earth Metals on Aqueous Speciation of Uranium(VI) and Sorption on Quartz

The effect of Mg-, Ca-, and Sr–Uranyl-Carbonato complexes with respect to sorption on quartz was studied by means of batch experiments with U(VI) concentration of 0.126 × 10⁻⁶ M in the presence and absence of Mg, Ca, and Sr (each 1 mM) at pH from 6.5 to 9. In the absence of alkaline earth elements, 90% of the U(VI) sorbed on the quartz surface at all pH. In the presence of Mg, Ca, and Sr, the sorption of U(VI) on quartz decreased to 50, 10, and 30%, respectively. Sorption kinetics of U(VI) on quartz is faster in the absence of alkaline earth elements and reached equilibrium after 12 h, whereas in the presence of Mg, Ca and Sr, the kinetics of U(VI) sorption on quartz is pH dependent and attained equilibrium after 24 h. Aqueous speciation calculations for alkaline earth uranyl carbonates were carried out by using PHREEQC with the Nuclear Energy Agency thermodynamic database (NEA_2007) by adding constants for MUO₂(CO₃)₃²⁻ and M₂UO₂(CO₃)₃⁰ (M = Ca, Mg, Sr). This study reveals that alkaline earth elements can have a significant effect on the aqueous speciation of U(VI) under neutral to alkaline pH conditions and subsequently sorption behavior and mobility of U(VI) in aqueous environments.     

Arsenate and arsenite adsorption onto Al-containing ferrihydrites. Implications for arsenic immobilization after neutralization of acid mine drainage

Natural ferrihydrites (Fh) often contain impurities such as aluminum, especially in acid mine drainage, and these impurities can potentially impact the chemical reactivity of Fh with respect to metal (loid) adsorption. In the present study, we have investigated the influence of aluminum on the sorption properties of ferrihydrite with respect to environmentally relevant aqueous arsenic species, arsenite and arsenate. We have conducted sorption experiments by reacting aqueous As(III) and As(V) with synthetic Al-free and Al-bearing ferrihydrite at pH 6.5. Our results reveal that, when increasing the Al:Fe molar ratio in Fh, the sorption density dramatically decreased for As(III), whereas it increased for As(V). Extended X-ray Absorption Fine Structure (EXAFS) spectroscopy analysis at the As K-edge indicated that the As^IIIO₃ pyramid binds to FeO₆ octahedra on both Al-free Fh and Al-bearing Fh, by forming bidentate mononuclear edge-sharing (²E) and bidentate binuclear corner-sharing (²C) surface complexes characterized by As–Fe distances of 2.9 Å and 3.4 Å, respectively. The decrease in As(III) sorption density with increasing Al:Fe ratio in Fh could thus be explained by a low affinity of the As(OH)₃ molecule for Al surface sites compared to Fe ones. In contrast, on the basis of available literature on As(V) adsorption mechanisms, we suggest that, in addition to inner-sphere ²C arsenate surface complexes, outer-sphere arsenate surface complexes forming hydrogen bonds with both Al–OH and Fe–OH surface sites could explain the enhancement of As(V) sorption onto aluminous Fh relative to Al-free Fh, as observed in the present study. The presence of aluminum in Fh may thus enhance the mobility of arsenite with respect to arsenate in Acid Mine Drainage impacted systems, while mixed Al:Fe systems could present an alternative for arsenic removal from impacted waters, provided that As(III) would be oxidized to As(V).     

Biogenic uraninite precipitation and its reoxidation by iron(III) (hydr)oxides: A reaction modeling approach

One option for immobilizing uranium present in subsurface contaminated groundwater is in situ bioremediation, whereby dissimilatory metal-reducing bacteria and/or sulfate-reducing bacteria are stimulated to catalyze the reduction of soluble U(VI) and precipitate it as uraninite (UO₂). This is typically accomplished by amending groundwater with an organic electron donor. It has been shown, however, that once the electron donor is entirely consumed, Fe(III) (hydr)oxides can reoxidize biogenically produced UO₂, thus potentially impeding cleanup efforts. On the basis of published experiments showing that such reoxidation takes place even under highly reducing conditions (e.g., sulfate-reducing conditions), thermodynamic and kinetic constraints affecting this reoxidation are examined using multicomponent biogeochemical simulations, with particular focus on the role of sulfide and Fe(II) in solution. The solubility of UO₂ and Fe(III) (hydr)oxides are presented, and the effect of nanoscale particle size on stability is discussed. Thermodynamically, sulfide is preferentially oxidized by Fe(III) (hydr)oxides, compared to biogenic UO₂, and for this reason the relative rates of sulfide and UO₂ oxidation play a key role on whether or not UO₂ reoxidizes. The amount of Fe(II) in solution is another important factor, with the precipitation of Fe(II) minerals lowering the Fe⁺² activity in solution and increasing the potential for both sulfide and UO₂ reoxidation. The greater (and unintuitive) UO₂ reoxidation by hematite compared to ferrihydrite previously reported in some experiments can be explained by the exhaustion of this mineral from reaction with sulfide. Simulations also confirm previous studies suggesting that carbonate produced by the degradation of organic electron donors used for bioreduction may significantly increase the potential for UO₂ reoxidation through formation of uranyl carbonate aqueous complexes.     

The effects of uranium speciation on the rate of U(VI) reduction by Shewanella oneidensis MR-1

We measured the kinetics of U(VI) reduction by Shewanella oneidensis MR-1 under anaerobic conditions in the presence of variable concentrations of either EDTA or dissolved Ca. We measured both total dissolved U and U(VI) concentrations in solution as a function of time. In separate experiments, we also measured the extent of U(VI) adsorption onto S. oneidensis in order to quantify the thermodynamic stabilities of the important U(VI)-bacterial surface complexes. In the EDTA experiments, the rate of U(IV) production increased with increasing EDTA concentration. However, the total dissolved U concentrations remained constant and identical to the initial U concentrations during the course of the experiments for all EDTA-bearing systems. Additionally, the U(VI) reduction rate in the EDTA experiments exhibited a strong correlation to the concentration of the aqueous U⁴⁺-EDTA complex. We conclude that the U(VI) reduction rate increases with increasing EDTA concentration, likely due to U⁴⁺-EDTA aqueous complexation which removes U(IV) from the cell surface and prevents UO₂ precipitation.In the Ca experiments, the U(VI) reduction rate decreased as Ca concentration increased. Our thermodynamic modeling results based on the U(VI) adsorption data demonstrate that U(VI) was adsorbed onto the bacterial surface in the form of a Ca-uranyl-carbonate complex in addition to a number of other Ca-free uranyl complexes. The observed U(VI) reduction rates in the presence of Ca exhibit a strong negative correlation to the concentration of the Ca-uranyl-carbonate bacterial surface complex, but a strong positive correlation to the total concentration of all the other Ca-free uranyl surface complexes. Thus, the concentration of these Ca-free uranyl surface complexes appears to control the rate of U(VI) reduction by S. oneidensis in the presence of dissolved Ca. Our results demonstrate that U speciation, both of U(VI) before reduction and of U(IV) after reduction, affects the reduction kinetics, and that thermodynamic modeling of the U speciation may be useful in the prediction of reduction kinetics in realistic geologic settings.     

The effect of Si and Al concentrations on the removal of U(VI) in the alkaline conditions created by NH3 gas

Remediation of uranium in the deep unsaturated zone is a challenging task, especially in the presence of oxygenated, high-carbonate alkalinity soil and pore water composition typical for arid and semi-arid environments of the western regions of the U.S. This study evaluates the effect of various pore water constituencies on changes of uranium concentrations in alkaline conditions, created in the presence of reactive gases such as NH₃ to effectively mitigate uranium contamination in the vadose zone sediments. This contaminant is a potential source for groundwater pollution through slow infiltration of soluble and highly mobile uranium species towards the water table. The objective of this research was to evaluate uranium sequestration efficiencies in the alkaline synthetic pore water solutions prepared in a broad range of Si, Al, and bicarbonate concentrations typically present in field systems of the western U.S. regions and identify solid uranium-bearing phases that result from ammonia gas treatment. In previous studies (Szecsody et al. 2012; Zhong et al. 2015), although uranium mobility was greatly decreased, solid phases could not be identified at the low uranium concentrations in field-contaminated sediments. The chemical composition of the synthetic pore water used in the experiments varied for silica (5–250 mM), Al³⁺ (2.8 or 5 mM), HCO₃⁻ (0–100 mM) and U(VI) (0.0021–0.0084 mM) in the solution mixture. Experiment results suggested that solutions with Si concentrations higher than 50 mM exhibited greater removal efficiencies of U(VI). Solutions with higher concentrations of bicarbonate also exhibited greater removal efficiencies for Si, Al, and U(VI). Overall, the silica polymerization reaction leading to the formation of Si gel correlated with the removal of U(VI), Si, and Al from the solution. If no Si polymerization was observed, there was no U removal from the supernatant solution. Speciation modeling indicated that the dominant uranium species in the presence of bicarbonate were anionic uranyl carbonate complexes (UO₂(CO₃)₂⁻² and UO₂(CO₃)₃⁻⁴) and in the absence of bicarbonate in the solution, U(VI) major species appeared as uranyl-hydroxide (UO₂(OH)₃⁻ and UO₂(OH)₄⁻²) species. The model also predicted the formation of uranium solid phases. Uranyl carbonates as rutherfordine [UO₂CO₃], cejkaite [Na₄(UO2)(CO₃)₃] and hydrated uranyl silicate phases as Na-boltwoodite [Na(UO₂)(SiO₄)·1.5H₂O] were anticipated for most of the synthetic pore water compositions amended from medium (2.9 mM) to high (100 mM) bicarbonate concentrations.     

Sequestration of arsenate from aqueous solution using 2-line ferrihydrite: equilibria,kinetics, and X-ray absorption spectroscopic analysis

Arsenic(V), as the arsenate (AsO₄ ^3?) ion and its conjugate acids, has a strong affinity on Fe, Mn, and Al (oxyhydr)oxides and clay minerals. Removal of arsenate from aqueous solution by poorly crystalline ferrihydrite (hydrous ferric oxide) via a combination of macroscopic (equilibria and kinetics of sorption) and X-ray absorption spectroscopic studies was investigated. The removal of arsenate significantly decreased with increasing pH and sorption maxima of approximately 1.994 mmol/g (0.192 mol_As/mol_Fe) were achieved at pH 2.0. The Langmuir isotherm is most appropriate for arsenate sorption over the wide range of pH, indicating that arsenate sorption preferentially takes place at relatively homogenous and monolayer sites rather than heterogeneous and multilayer surfaces. The kinetic study demonstrated that arsenate sorption onto 2-line ferrihydrite is considerably fast, and sorption equilibrium was achieved within the reaction time of 2 h. X-ray absorption near-edge structure spectroscopy indicates no change in oxidation state of arsenate following interaction with the ferrihydrite surfaces. Extended X-ray absorption fine structure spectroscopy supports the efficient removal of arsenate by the 2-line ferrihydrite through the formation of highly stable inner-sphere surface complexes, such as bidentate binuclear corner-sharing (²C) and bidentate mononuclear edge-sharing (²E) complexes.     

Reactions of the feldspar surface with metal ions: Sorption of Pb(II), U(VI) and Np(V), and surface analytical studies of reaction with Pb(II) and U(VI)

Feldspar minerals are thermodynamically unstable in the near-surface environment and their surfaces are well known to react readily with aqueous solutions, leading to incongruent dissolution at low pH values, but congruent dissolution at neutral and high pH values. Interactions with mineral surfaces are an important control on the environmental transport of trace elements and detrital feldspars are abundant in soils and sediments. However, the interactions of metal ions in solution with the reacting feldspar surface have not been widely explored. The interactions of Pb(II), U(VI) and Np(V) ions with the feldspar surface have therefore been studied. Lead is taken up by the microcline surface at pH 6 and 10, but no uptake could be measured at pH 2. There was measurable uptake of Pb(II) on the plagioclase surface at pH 2, 6 and 10. Uptake always increased with pH. In most conditions, Pb(II) reacts through cation exchange process although, at high pH, a discrete phase, probably hydrocerrusite, is observed by atomic force microscopy (AFM) to precipitate on the plagioclase surface. Supersaturation with hydrocerrusite in these conditions is expected from thermodynamic calculations. Uptake of uranyl ion , generally through surface complex formation, could only be measured at pH 6 and 10. At pH 6 and an initial U(VI) concentration above 21.0 μM, precipitation of becquerelite (Ca[(UO₂)₃O₂(OH)₃]₂·8H₂O), identified by AFM and characterised by grazing incidence X-ray diffraction and X-ray photoelectron spectroscopy, is observed on plagioclase. The U(VI) concentration range in which becquerelite precipitation begins (dissolved U(VI) 1-5 μM) is consistent with that predicted from thermodynamic modelling. On plagioclase feldspar, secondary ion mass spectrometry showed diffusion of uranium into the altered surface layer. Uptake of the neptunyl ion (Np(V)) was found at pH 6 and 10 for microcline and at pH 2, 6 and 10 for plagioclase, and was generally lower than uptake of U(VI). By combining batch sorption experiments with imaging and surface analysis, and thermodynamic modelling, it has been possible to gain a mechanistic insight into the reactions of the feldspar surface with metal ions in solution.     

Behavior of radium,thorium and uranium in groundwater near the Buena Lagoon in the Coastal Zone of the State of Rio de Janeiro,Brazil

Groundwater found near the head of the Buena Lagoon in the State of Rio de Janeiro, Brazil, has high salinity and low pH values. There is a strong correlation between concentrations of radium and light rare earth elements (LREEs) that suggests the leaching of monazite as a common source. Radium is present predominantly as ²²⁸Ra. The factors responsible for high radium mobility in groundwater seem to be high levels of salinity resulting in the competition for adsorption sites, and low pH values resulting in the limited adsorption of Ra²⁺ on the positively-charged surface of adsorbents. The behavior of uranium and thorium is also influenced by their speciation and low pH conditions. Uranium is present as a positively charged uranyl ion UO₂²⁺ in low pH samples and is very mobile. Similarly, the presence of positively charged Th⁴⁺ and thorium complexes with sulfate result in relatively high thorium concentrations at a low pH range. On the other hand, the mobility of phosphate released by dissolving monazite is probably reduced due to its adsorption and precipitation close to its source.