The evolution of iron-core white dwarfs

Recent measurements by Hipparcos present observational evidence supporting the existence of some white dwarf (WD) stars with iron-rich core composition. In connection with this, the present paper is aimed at exploring the structure and evolution of iron-core WDs by means of a detailed and updated evolutionary code. In particular, we examined the evolution of the central conditions, neutrino luminosity, surface gravity, crystallization, internal luminosity profile and ages. We find that the evolution of iron-rich WDs is markedly different from that of their carbon–oxygen counterparts. In particular, cooling is strongly accelerated (up to a factor of 5 for models with pure iron composition) as compared with the standard case. Thus, if iron WDs were very numerous, some of them would have had time enough to evolve at lower luminosities than that corresponding to the fall-off in the observed WD luminosity function.     

Accreting CO material onto ONe white dwarfs towards accretion-induced collapse

The final outcomes of accreting ONe white dwarfs(ONe WDs) have been studied for several decades,but there are still some issues that are not resolved. Recently,some studies suggested that the deflagration of oxygen would occur for accreting ONe WDs with Chandrasekhar masses. In this paper,we aim to investigate whether ONe WDs can experience accretion-induced collapse(AIC) or explosions when their masses approach the Chandrasekhar limit. Employing the stellar evolution code Modules for Experiments in Stellar Astrophysics(MESA),we simulate the longterm evolution of ONe WDs with accreting CO material. The ONe WDs undergo weak multicycle carbon flashes during the mass-accretion process,leading to mass increase of the WDs. We found that different initial WD masses and mass-accretion rates influence the evolution of central density and temperature. However,the central temperature cannot reach the explosive oxygen ignition temperature due to neutrino cooling. This work implies that the final outcome of accreting ONe WDs is electroncapture induced collapse rather than thermonuclear explosion.     

Sources of error in the photoclinometric determination of planetary topography: A reappraisal

The technique of photoclinometry has frequently been used to determine planetary topography without proper consideration of possible sources of error. Previous studies of error sources have been limited in extent and have overlooked the importance of factors such as atmospheric scattering and the choice of a surface photometric function. This paper adopts a thorough and more direct approach to error analysis, whereby known topography is compared with photoclinometric profiles derived from synthetic quantised reflectance scans.Instrumental and geometric sources of error are found to exert a minimal influence on profiles in practice, provided that sufficient care is taken in the selection of images and the extraction of scans from those images. Environmental factors — relating to the scattering properties of the surface and, if present, atmosphere — are far more important. It is found that a simple Lommel-Seeliger law is unlikely to be appropriate to the majority of planetary terrains, given its inability to model the effects of multiple scattering or unresolved macroscopic roughness. It is further demonstrated that a Minnaert function or combination of Lommel-Seeliger and Lambert laws may empirically compensate for the first of these phenomena but not the second; in this respect, Hapke's equation is a far superior model of surface optical properties. In the case of an atmosphere, the need to correct for scattering by aerosols or suspended dust becomes more acute as atmospheric opacity increases and as particle scattering becomes more forward-biased. To perform this correction, a model for the combined reflectance of surface and atmosphere must be used when deriving profiles.Two case studies — of a small impact crater on Triton and a dust-mantled basaltic lava flow on Mars - are presented here. Regarding the latter, the implications that errors in photoclinometric flow thickness measurements have for inferred lava rheology are examined. Conservative estimates of errors in yield strength and apparent viscosity easily exceed 100% when one of the simplest photometric models possible — a Lommel-Seeliger law — is used to derive a profile.In the light of these findings, strategies are suggested for improving the results obtained from photoclinometry in the future.     

Accreting He-rich material onto carbon-oxygen white dwarfs until explosive carbon ignition

Type Ia supernovae(SNe Ia) play an important role in studies of cosmology and galactic chemical evolution.They are believed to be thermonuclear explosions of carbon-oxygen white dwarfs(CO WDs)when their masses approach the Chandrasekar(Ch) mass limit.However,it is still not completely understood how a CO WD increases its mass to the Ch-mass limit in the classical single-degenerate(SD) model.In this paper,we studied the mass accretion process in the SD model to examine whether the WD can explode as an SN Ia.Employing the stellar evolution code called modules for experiments in stellar astrophysics(MESA),we simulated the He accretion process onto CO WDs.We found that the WD can increase its mass to the Ch-mass limit through the SD model and explosive carbon ignition finally occurs in its center,which will lead to an SN Ia explosion.Our results imply that SNe Ia can be produced from the SD model through steady helium accretion.Moreover,this work can provide initial input parameters for explosion models of SNe Ia.     

Galactic models and white dwarf populations

We make use of a previous well-tested Galactic model, but describing the observational behaviour of the various stellar components in terms of suitable assumptions on their evolutionary status. In this way we are able to predict the expected distribution of Galactic white dwarfs (WDs), with results which appear in rather good agreement with recent estimates of the local WD luminosity function. The predicted occurrence of WDs in deep observations of selected Galactic fields is presented, and we discuss the role played by WDs in star counts. The effects on the theoretical predictions of different white dwarf evolutionary models, ages, initial mass functions and relations between progenitor mass and WD mass are also discussed.     

New age estimates of M31 globular clusters from multicolour photometry

The large majority of extragalactic star cluster studies performed to date essentially use multicolour photometry, combined with theoretical stellar synthesis models, to derive ages, masses, extinction estimates and metallicities. M31 offers a unique laboratory for studies of globular cluster (GC) systems. In this paper, we obtain new age estimates for 91 M31 GCs, based on improved photometric data, updated theoretical stellar synthesis models and sophisticated new fitting methods. In particular, we used photometric measurements from the Two Micron All Sky Survey (2MASS), which, in combination with optical photometry, can partially break the well-known age–metallicity degeneracy operating at ages in excess of a few Gyr. We show robustly that previous age determinations based on photometric data were affected significantly by this age–metallicity degeneracy. Except for one cluster, the ages of our other sample GCs are all older than 1 Gyr. Their age distribution shows populations of young- and intermediate-age GCs, peaking at ∼3 and 8 Gyr, respectively, as well as the 'usual' complement of well-known old GCs, i.e. GCs of similar age as the majority of the Galactic GCs. Our results also show that although there is significant scatter in metallicity at any age, there is a notable lack of young metal-poor and old metal-rich GCs, which might be indicative of an underlying age–metallicity relationship among the M31 GC population.     

Unbiased estimates of galaxy scaling relations from photometric redshift surveys

Many physical properties of galaxies correlate with one another, and these correlations are often used to constrain galaxy formation models. Such correlations include the colour–magnitude relation, the luminosity–size relation, the fundamental plane, etc. However, the transformation from observable (e.g. angular size, apparent brightness) to physical quantity (physical size, luminosity) is often distance dependent. Noise in the distance estimate will lead to biased estimates of these correlations, thus compromising the ability of photometric redshift surveys to constrain galaxy formation models. We describe two methods which can remove this bias. One is a generalization of the V _max method, and the other is a maximum-likelihood approach. We illustrate their effectiveness by studying the size–luminosity relation in a mock catalogue, although both methods can be applied to other scaling relations as well. We show that if one simply uses photometric redshifts one obtains a biased relation; our methods correct for this bias and recover the true relation.     

Photometric redshifts with surface brightness priors

We use galaxy surface brightness as prior information to improve photometric redshift (photo- z ) estimation. We apply our template-based photo- z method to imaging data from the ground-based VVDS survey and the space-based GOODS field from HST , and use spectroscopic redshifts to test our photometric redshifts for different galaxy types and redshifts. We find that the surface brightness prior eliminates a large fraction of outliers by lifting the degeneracy between the Lyman and 4000-Å breaks. Bias and scatter are improved by about a factor of 2 with the prior in each redshift bin in the range  0.4 < z < 1.3  , for both the ground and space data. Ongoing and planned surveys from the ground and space will benefit, provided that care is taken in measurements of galaxy sizes and in the application of the prior. We discuss the image quality and signal-to-noise ratio requirements that enable the surface brightness prior to be successfully applied.     

A visible and near-infrared photometric correction for Moon Mineralogy Mapper (M3)

Observations of the Moon obtained by the Moon Mineralogy Mapper (M³) instrument were acquired at various local viewing geometries. To compensate for this, a visible near-infrared photometric correction for the M³ observations of the lunar surface has been derived. Images are corrected to the standard geometry of 30° phase angle with an incidence of 30° and an emission of 0°. The photometric correction is optimized for highland materials but is also a good approximation for mare deposits. The results are compared with ground-based observations of the lunar surface to validate the absolute reflectance of the M³ observations. This photometric model has been used to produce the v1.0 Level 2 delivery of the entire set of M³ data to the Planetary Data System (PDS). The photometric correction uses local topography, in this case derived from an early version of the Lunar Orbiter Laser Altimeter data, to more accurately determine viewing geometry. As desired, this photometric correction removes most of the topography of the M³ measurements. In this paper, two additional improvements of the photometric modeling are discussed: (1) an extrapolated phase function long ward of 2500 nm to avoid possible misinterpretation of spectra in the wavelength region that includes possible OH/H₂O absorptions and (2) an empirical correction to remove a residual cross-track gradient in the data that likely is an uncorrected instrumental effect. New files for these two effects have been delivered to PDS and can be applied to the M³ observations.     

Maximum mass of magnetic white dwarfs

We revisit the problem of the maximum masses of magnetized white dwarfs(WDs).The impact of a strong magnetic field on the structure equations is addressed.The pressures become anisotropic due to the presence of the magnetic field and split into parallel and perpendicular components.We first construct stable solutions of the Tolman-Oppenheimer-Volkoff equations for parallel pressures and find that physical solutions vanish for the perpendicular pressure when B(?) 10~(13) G.This fact establishes an upper bound for a magnetic field and the stability of the configurations in the(quasi) spherical approximation.Our findings also indicate that it is not possible to obtain stable magnetized WDs with super-Chandrasekhar masses because the values of the magnetic field needed for them are higher than this bound.To proceed into the anisotropic regime,we can apply results for structure equations appropriate for a cylindrical metric with anisotropic pressures that were derived in our previous work.From the solutions of the structure equations in cylindrical symmetry we have confirmed the same bound for B ~ 10~(13) G,since beyond this value no physical solutions are possible.Our tentative conclusion is that massive WDs with masses well beyond the Chandrasekhar limit do not constitute stable solutions and should not exist.     

Using GALEX-SDSS-PanSTARRS-HST-Gaia to understand post-AGB evolution

Hot WDs in binary systems with a less evolved star are particularly invaluable astrophysical probes, the unevolved companion enabling better derivation of distance and age than is usually possible for post-AGB objects, and therefore also of their radius and luminosity. But hot white dwarfs (WD) are elusive at all wavelengths except the UV (Bianchi et al. 2011a). From our GALEX UV source catalogs (Bianchi et al. 2011a,b, 2014, 2017) matched to SDSS, we identified thousands of candidate hot WDs including WDs in binary systems consisting of a hot WD and a companion of spectral type from A to M. The identification and preliminary characterization of the stellar parameters is based on the analysis of the photometric SED from far-UV to z-band.We have observed subsamples of the UV-selected WDs with the Hubble Space Telescope (HST) to better characterize their stellar parameters. We obtained (1) UV spectroscopy with STIS and analyzed the UV spectra together with optical SDSS spectra, and (2) multi-band imaging with WFC3 (\(0.04^{\prime\prime}/\mbox{pixel}\)) to measure angular separation and individual SEDs of the pair’s components in binary systems. In our HST/WFC3 sample of 59 hot-WD binaries with late-type companions, we found that at least a dozen have possibly evolved without exchanging mass. The UV STIS spectroscopy led to the revision of previous results based on optical spectra only, because of the often undetectable or unquantifiable contribution of the hot component to the optical fluxes.     

The double helium-white dwarf channel for the formation of AM CVn binaries

Most close double helium white dwarfs will merge within a Hubble time due to orbital decay by gravitational wave radiation.However,a significant fraction with low mass ratios will survive for a long time as a consequence of stable mass transfer.Such stable mass transfer between two helium white dwarfs(He WDs) provides one channel for the production of AM CVn binary stars.In previous calculations of double He WD progenitors,the accreting He WD was treated as a point mass.We have computed the evolution of 16 double He WD models in order to investigate the consequences of treating the evolution of both components in detail.We find that the boundary between binaries having stable and unstable mass transfer is slightly modified by this approach.By comparing with observed periods and mass ratios,we redetermine masses of eight known AM CVn stars by our double He WDs channel,i.e.HM Cnc,AM CVn,V406 Hya,J0926,J1240,GP Com,Gaia14 aae and V396 Hya.We propose that central spikes in the triple-peaked emission spectra of J1240,GP Com and V396 Hya and the surface abundance ratios of N/C/O in GP Com can be explained by the stable double He WD channel.The mass estimates derived from our calculations are used to discuss the predicted gravitational wave signal in the context of the Laser Interferometer Space Antenna(LISA) project.     

The globular clusters–stellar haloes connection in early-type galaxies

This paper explores if, and to what an extent, the stellar populations of early-type galaxies can be traced through the colour distribution of their globular cluster (GC) systems. The analysis, based on a galaxy sample from the Virgo Advanced Camera for Surveys data, is an extension of a previous approach that has been successful in the cases of the giant ellipticals NGC 1399 and NGC 4486, and assumes that the two dominant GC populations form along diffuse stellar populations sharing the cluster chemical abundances and spatial distributions. The results show that (a) integrated galaxy colours can be matched to within the photometric uncertainties and are consistent with a narrow range of ages; (b) the inferred mass to luminosity ratios and stellar masses are within the range of values available in the literature; (c) most GC systems occupy a thick plane in the volume space defined by the cluster formation efficiency, total stellar mass and projected surface mass density. The formation efficiency parameter of the red clusters shows a dependency with projected stellar mass density that is absent for the blue globulars. In turn, the brightest galaxies appear clearly detached from that plane as a possible consequence of major past mergers; (d) the stellar mass–metallicity relation is relatively shallow but shows a slope change at   M _*≈ 10¹⁰ M_⊙  . Galaxies with smaller stellar masses show predominantly unimodal GC colour distributions. This result may indicate that less massive galaxies are not able to retain chemically enriched interstellar matter.     

Interpreting photometry of regolith-like surfaces with different topographies: shadowing and multiple scattering

The effects of various types of topography on the shadow-hiding effect and multiple scattering in particulate surfaces are studied. Two bounding cases were examined: (1) the characteristic scale of the topography is much larger than the surface particle size, and (2) the characteristic scale of the topography is comparable to the surface particle size. A Monte Carlo ray-tracing method (i.e., geometric optics approximation) was used to simulate light scattering. The computer modeling shows that rocky topographies generated by randomly distributed stones over a flat surface reveal much steeper phase curves than surface with random topography generated from Gaussian statistics of heights and slopes. This is because rocks may have surface slopes greater than 90°. Consideration of rocky topography is important for interpreting rover observations. We show the roughness parameter in the Hapke model to be slightly underestimated for bright planetary surfaces, as the model neglects multiple scattering on large-scale topographies. The multiple scattering effect also explains the weak spectral dependences of the roughness parameter in Hapke's model found by some authors. Multiple scattering between different parts of a rough surface suppresses the effect of shadowing, thus the effects produced by increases in albedo on the photometric behavior of a surface can be compensated for with the proper decreases in surface roughness. This defines an effective (photometric) roughness for a surface. The interchangeability of albedo and roughness is shown to be possible with fairly high accuracy for large-scale random topography. For planetary surfaces that have a hierarchically arranged large-scale random topography, predictions made with the Hapke model can significantly differ from real values of roughness. Particulate media with surface borders complicated by Gaussian or clumpy random topographies with characteristic scale comparable to the particle size reveal different photometric behaviors in comparison with particulate surfaces that are flat or the scale of their topographies is much larger than the particle size.     

Nuclear stellar discs in early-type galaxies — II. Photometric properties

Hubble Space Telescope images of two early-type galaxies harbouring both nuclear and outer stellar discs are studied in detail. By means of a photometric decomposition, the images of NGC 4342 and 4570 are analysed and the photometric properties of the nuclear discs investigated. We find a continuity of properties in the parameter space defined by the central surface brightness μ₀ and the scalelength R _d of discs in spirals, S0s and embedded discs in ellipticals, in the sense that the nuclear discs extend the observed disc properties even further towards smaller scalelengths and brighter central surface brightnesses. When including the nuclear discs, disc properties span more than four orders of magnitude in both scalelength and central surface brightness. The nuclear discs studied here are the smallest and brightest stellar discs known, and as such, they are as extreme in their photometric properties as Malin I, when compared with typical galactic discs that obey Freeman's law. We discuss a possible formation scenario in which the double-disc structure observed in these galaxies has been shaped by now dissolved bars. Based on the fact that the black holes known to exist in some of these galaxies have masses comparable to those of the nuclear discs, we explore a possible link between the black holes and the nuclear discs.     

Detectability of exoplanetary transits from radial velocity surveys

Of the known transiting extrasolar planets, a few have been detected through photometric follow-up observations of radial velocity planets. Perhaps the best known of these is the transiting exoplanet HD 209458b. For hot Jupiters (periods less than ∼5 d), the a priori information that 10 per cent of these planets will transit their parent star due to the geometric transit probability leads to an estimate of the expected transit yields from radial velocity surveys. The radial velocity information can be used to construct an effective photometric follow-up strategy which will provide optimal detection of possible transits. Since the planet-harbouring stars are already known in this case, one is only limited by the photometric precision achievable by the chosen telescope/instrument. The radial velocity modelling code presented here automatically produces a transit ephemeris for each planet data set fitted by the program. Since the transit duration is brief compared with the fitted period, we calculate the maximum window for obtaining photometric transit observations after the radial velocity data have been obtained, generalizing for eccentric orbits. We discuss a typically employed survey strategy which may contribute to a possible radial velocity bias against detection of the very hot Jupiters which have dominated the transit discoveries. Finally, we describe how these methods can be applied to current and future radial velocity surveys.     

Thermophysical analysis of infrared observations of asteroids

Abstract— Visual photometry, which measures reflected solar radiation, can be combined with infrared radiometry, which measures absorbed and re‐radiated solar energy, to determine key properties of small solar system objects. This method can be applied via thermophysical model concepts not only for albedo and diameter determination, but also for studies of thermal parameters like thermal inertia, surface roughness or emissivity. Hence, a detailed analysis of the asteroid surface is possible and topics like surface mineralogy, the density of the regolith or the presence of a rocky surface, lightcurve influences due to shape or albedo, porosity of the surface material, etc. can be addressed. The “radiometric technique” based on a recently developed thermophysical model is presented. The model was extensively tested against observations from the infrared space observatory, including spectroscopic and photometric measurements at infrared wavelengths between 2 and 200 μm of more than 40 asteroids. The possible model applications are discussed in terms of the different levels of knowledge for individual asteroids. The effects of the thermal parameters are illustrated and methods are presented as to how to separate different aspects. Possibilities and limitations are evaluated for the possible transfer of this model to near‐Earth asteroids. In the long run, this kind of study of near‐Earth asteroids may provide answers to questions about their surface properties which are crucial to develop mitigation scenarios.     

Interferometric visibility and closure phase of microlensing events with finite source size

Interferometers from the ground and space will be able to resolve the two images in a microlensing event. This will at least partially lift the inherent degeneracy between physical parameters in microlensing events. To increase the signal-to-noise ratio, intrinsically bright events with large magnifications will be preferentially selected as targets. These events may be influenced by finite source size effects both photometrically and astrometrically. Using observed finite source size events as examples, we show that the fringe visibility can be affected by ∼5–10 per cent, and the closure phase by a few degrees – readily detectable by ground and space interferometers. Such detections will offer unique information about the lens–source trajectory relative to the baseline of the interferometers. Combined with photometric finite source size effects, interferometry offers a way to measure the angular sizes of the source and the Einstein radius accurately. Limb-darkening changes the visibility by a small amount compared with a source with uniform surface brightness, marginally detectable with ground-based instruments. We discuss the implications of our results for the plans to make interferometric observations of future microlensing events.     

On the baseline flux determination of microlensing events detectable with the difference image analysis method

To improve photometric precision by removing the blending effect, a newly developed technique of difference image analysis (DIA) has been adopted by several gravitational microlensing experiment groups. However, the principal problem of the DIA method is that, by its nature, it has difficulties in measuring the baseline flux F ₀ of a source star, causing a degeneracy problem in determining the lensing parameters of an event. Therefore, it is often believed that the DIA method is not as powerful as the classical method based on PSF photometry for determining the Einstein time-scales t _E of events.
In this paper, we demonstrate that the degeneracy problem in microlensing events, detectable from searches using the DIA method, is not as serious as is often thought. This is because a substantial fraction of events will be high amplification events for which the deviations of the amplification curves, constructed with the wrong baseline fluxes from their corresponding best-fit standard amplification curves, will be considerable, even for a small amount of the fractional baseline flux deviation Δ F ₀ F ₀. With a model luminosity function of source stars and under realistic observational conditions, we find that ∼30 per cent of detectable Galactic bulge events are expected to have high amplifications and their baseline fluxes can be determined with uncertainties Δ F ₀ F ₀≤0.5.     

Mars: Experimental study of albedo changes caused by dust fallout

An experimental study was undertaken to determine how the spectral and photometric properties of representative Martian areas are affected by fallout of atmospheric dust suspended during dust forms. A laboratory apparatus was used to simulate the uniform fallout and deposition of particles 1 to 5 μm in diameter. Spectral measurements from 0.4- to 1.2-μm wavelengths and photometric measurements at several wavelengths were made for a number of Mars-analog materials before and after deposition of 6 × 10^?5 to 1.5 × 10^?3 g/cm² of simulated fallout. These results indicate that the spectral and photometric properties of Martian regions can be affected significantly even by minute amounts of fallout. For instance, the reflectance at 0.56 μm of an average dark area will increase by 35% after deposition of only 9 × 10^?5 g/cm², and by 70% after deposition of 1.5 × 10^?4 g/cm². Thus the fallout from even one dust storm season (～2 × 10^?3 g/cm²) is sufficient to change significantly the spectral and photometric characteristics of the substrate material, if the fallout were ubiquitous over the surface and if no competing processes of dust removal from surface grains occured.