Re-appraisal of seismicity and seismotectonics in the north-eastern Algeria Part I: Review of historical seismicity

As large destructive seismic events are not frequent in Algeria, anexhaustive knowledge of the historical seismicity is required to have arealistic view of seismic hazard in this part of the world. This research workpresents a critical reappraisal of seismicity in the north-eastern Algeria forseismotectonic and seismic hazard purposes. This part of work focuses onthe seismicity of pre-1900 period for the area under consideration[33^°N-38^°N, 4^°E-9.5^°E]. By going back tothe available documentary sources and evaluating and analysing the eventsin geographical, cultural and historical context, it has been possible toidentify 111 events, from 1850–1899, which are not reported in therecent Algerian catalogue. Several spurious events, reported in standardlistings, have been deleted and nine unknown events have been discovered.It is quite clear that macroseismic information derived from press reportsand published documents in Algeria, under certain conditions, is veryincomplete, even for destructive earthquakes, located in the countrysideaway from communication centres. One of the reasons for this iscensorship, noticeable during the colonisation period. Critical analysis ofnewly collected information has allowed the determination and/or theimprovement of the macroseismic parameters of each event, such aslocation, maximum epicentral intensity and magnitude to produce anearthquake catalogue as homogeneous and complete as the available data,for the zone under study. The criteria used in this research are explainedand eight historical earthquakes have been the subject of retrospectivemacroseismic field construction.The investigation of historical earthquakes is one of the most important taskin studying seismotectonic for seismic hazard evaluation purposes.     

Recent seismicity in Northeast India and its adjoining region

Recent seismicity in the northeast India and its adjoining region exhibits different earthquake mechanisms – predominantly thrust faulting on the eastern boundary, normal faulting in the upper Himalaya, and strike slip in the remaining areas. A homogenized catalogue in moment magnitude, M _W, covering a period from 1906 to 2006 is derived from International Seismological Center (ISC) catalogue, and Global Centroid Moment Tensor (GCMT) database. Owing to significant and stable earthquake recordings as seen from 1964 onwards, the seismicity in the region is analyzed for the period with spatial distribution of magnitude of completeness m _t, b value, a value, and correlation fractal dimension D _C. The estimated value of m _t is found to vary between 4.0 and 4.8. The a value is seen to vary from 4.47 to 8.59 while b value ranges from 0.61 to 1.36. Thrust zones are seen to exhibit predominantly lower b value distribution while strike-slip and normal faulting regimes are associated with moderate to higher b value distribution. D _C is found to vary from 0.70 to 1.66. Although the correlation between spatial distribution of b value and D _C is seen predominantly negative, positive correlations can also be observed in some parts of this territory. A major observation is the strikingly negative correlation with low b value in the eastern boundary thrust region implying a possible case of extending asperity. Incidentally, application of box counting method on fault segments of the study region indicates comparatively higher fractal dimension, D, suggesting an inclination towards a planar geometrical coverage in the 2D spatial extent. Finally, four broad seismic source zones are demarcated based on the estimated spatial seismicity patterns in collaboration with the underlying active fault networks. The present work appraises the seismicity scenario in fulfillment of a basic groundwork for seismic hazard assessment in this earthquake province of the country.     

Probabilistic Seismic Hazard Assessment for Iraq Using Complete Earthquake Catalogue Files

Probabilistic seismic hazard analysis (PSHA) has been carried out for Iraq. The earthquake catalogue used in the present study covers an area between latitude 29°–38.5° N and longitude 39°–50° E containing more than a thousand events for the period 1905–2000. The entire Iraq region has been divided into thirteen seismogenic sources based on their seismic characteristics, geological setting and tectonic framework. The completeness of the seismicity catalogue has been checked using the method proposed by Stepp (1972). The analysis of completeness shows that the earthquake catalogue is not complete below M_s=4.8 for all of Iraq and seismic source zones S1, S4, S5, and S8, while it varies for the other seismic zones. A statistical treatment of completeness of the data file was carried out in each of the magnitude classes. The Frequency Magnitude Distributions (FMD) for the study area including all seismic source zones were established and the minimum magnitude of complete reporting (M_c) were then estimated. For the entire Iraq the M_c was estimated to be about M_s=4.0 while S11 shows the lowest M_c to be about M_s=3.5 and the highest M_c of about M_s=4.2 was observed for S4. The earthquake activity parameters (activity rate , b value, maximum regional magnitude m_max) as well as the mean return period (R) with a certain lower magnitude m_min m along with their probability of occurrence have been determined for all thirteen seismic source zones of Iraq. The maximum regional magnitude m_max was estimated as 7.87 ± 0.86 for entire Iraq. The return period for magnitude 6.0 is largest for source zone S3 which is estimated to be 705 years while the smallest value is estimated as 9.9 years for all of Iraq.The large variation of the b parameter and the hazard level from zone to zone reflects crustal heterogeneity and the high seismotectonic complexity. The seismic hazard near the source boundaries is directly and strongly affected by the change in the delineation of these boundaries. The forces, through which the geological structure along the plate boundary in Eastern and Northeastern Iraq are evolved, are still active causing stress-strain accumulation, deformation and in turn producing higher probabilities of earthquake activity. Thus, relatively large destructive earthquakes are expected in this region. The study is intended to serve as a reference for more advanced approaches and to pave the path for the probabilistic assessment of seismic hazard in this region.     

The reservoir-associated earthquakes of April 1983 in western Thailand: Source modeling and implications for induced seismicity

On 22 April 1983, a very large area of Thailand and part of Burma were strongly shaken by a rare earthquake (m _b=5.8,M _s=5.9). The epicenter was located at the Srinagarind reservoir about 190 km northwest of Bangkok, a relatively stable continental region that experienced little previous seismicity. The main shock was preceded by some foreshocks and followed by numerous aftershocks. The largest foreshock ofm _b=5.2 occurred 1 week before the main shock, and the largest aftershock ofm _b=5.3 took place about 3 hours after the main shock. Focal mechanisms of the three largest events in this earthquake sequence have been studied by other seismologists using firts-motion data. However, the solutions for the main shock and the largest aftershock showed significant inconsistency with known surface geology and regional tectonics. We reexamined the mechanisms of these three events by using teleseismicP-andS-waveforms and through careful readings ofP-wave first motions. The directions of theP axes in our study range from NNW-SSE to NNE-SSW, and nodal planes strike in the NW-SE to about E-W in agreement with regional tectonics and surface geology. The main shock mechanism strikes 255°, dips 48°, and slips 63.5°. The fault motions during the main shock and the foreshock are mainly thrust, while the largest aftershock has a large strike-slip component. The seismic moment and the stress drop of the mainshock are determined to be 3.86×10²⁴ dyne-cm and 180 bars, respectively. The occurrence of these thrust events appears to correlate with the unloading of the Srinagarind reservoir. The focal depths of the largest foreshock, the main shock, and the largest aftershock are determined to be 5.4 km, 8 km, and 22.7 km, respectively, from waveform modeling and relative location showing a downward migration of hypocenters of the three largest events during the earthquake sequence. Other characteristics of this reservoir-induced earthquake sequence are also discussed.     

Present-day seismicity,stress field and crustal deformation of Egypt

In this study we investigate present-day seismicity and crustal deformation of Egypt based on a comprehensive earthquake catalog from 1900 to 2004 by focal mechanism stress inversion and by recent GPS observations. Spatial distribution of earthquake epicenters indicates that Egypt has been suffered from both interplate and intraplate earthquakes. Most earthquake activity (more than 70%) has been concentrated in northern Egypt along the geologically documented borders of Sinai subplate (northern Red Sea and its two branches Suez rift and Aqaba–Dead Sea transform). The majority of inland earthquake focal mechanisms in Egypt are normal with strike-slip component or strike-slip faulting events. Only a small minority, namely four events, exhibits reverse faulting. The inversion method of Gephart and Forsyth (1984) was applied to calculate the orientation of the principle stress axes and the shape of the stress tensor. The best fitting tensor in Egypt shows homogeneity stress field. The tension stress regime is dominant in northern Egypt. The stress directions are well resolved by the 95% confidence limits, the relative stress magnitude has a value of about 0.3. However, along southern Egypt the strike-slip regime is dominant. The shape factor (R-value) is 0.5, which means that the deviatoric components of σ₁ and σ₃ are of the same magnitude, but of opposite signs. The average horizontal velocity of GPS stations in Egypt is 5.15± 1.1 mm/year in mostly NNW direction. The results of deformation analysis indicate that the northern Egypt is deformed more than the southern part. Only the Egyptian-Mediterranean coastal–Nile Delta zone dominates as a compression deformation area. However, an extensional deformation has been observed throughout the rest of country. This means that the relative motion of African plate with respect to both Eurasian and Arabian has highly controlled the deformation processes in Egypt.     

The Dinar Earthquake (Mw = 6.2; October 1, 1995; Afyon-Turkey) and Earthquake Hazard of the Dinar-Çivril Fault

—A moderately strong earthquake (M _w = 6.2) occurred in the town of Dinar at 17.57 UT on October 1, 1995, taking the lives of 90 people and damaging about 4500 buildings. Its epicenter is located near the Dinar-Çivril fault and its focal mechanism is linked to a northeast-southwesterly tensional stress field arising from the interaction between the subducting African plate and the overriding Aegean-Anatolian plate in the eastern Mediterranean.¶Surface cracks of the October 1 earthquake have been observed 10 km continuously along the Dinar-Çivril fault. The cracks have displayed a mode of dip-slip; however, some have also indicated lateral slip. The different modes of slip are generally in agreement with the fault plane solution and are indicators of the complex nature of the rupture process.¶In investigating the earthquake hazard of the Dinar-Çivril fault and proximity, the maximum likelihood method was used to estimate seismic hazard parameters of b-value, seismicity activity rate λ _m and the expected maximum magnitude M _max?. The data consisted of the historical data covering the period between 1800–1900 and instrumental data between 1900 and 1992. This method, allowing use of the mixed earthquake catalogue containing both historical and instrumental earthquake data, yielded values of 0.70, 1.92 and 7.14 for b, λ _m and M _max?, respectively. The recurrence time estimated for an earthquake of a magnitude of M _w = 6.2 is 123 years. The non-occurrence probabilities of such an earthquake in 1 and 50 years are 0.21 and 0.04, respectively.     

Estimation of Seismic Hazard Parameters for the Himalayas and its Vicinity from Complete Data Files

—The maximum likelihood estimation of earthquake hazard parameters has been made in the Himalayas and its surrounding areas on the basis of a procedure which utilizes data containing complete files of the most recent earthquakes. The entire earthquake catalogue used covers the period from 1900–1990. The maximum regional magnitude M _max?, the activity rate of the seismic event λ, the mean return period R of earthquakes with a certain lower magnitude M _max≥ m along with their probability of occurrence, as well as the parameter b of of Gutenberg Richter magnitude-frequency relationship, have been determined for six different seismic zones of the Himalayas and its vicinity. It is shown that in general the hazard is higher in the zone NEI and BAN than the other four zones. The high difference of the b parameter and the hazard level from zone to zone reflect the high seismotectonic complexity and crustal heterogeneity.     

2020年新疆伽师MS6.4地震震源区 微震检测与目录完备性分析

中强地震发生后,地震检测因受到尾波的干扰可能会遗漏部分微震事件,影响地震目录的完备性。文章利用波形模板匹配方法对2020年新疆伽师M_S6.4地震序列开展微震检测,相比原始的中国地震台网中心统一地震目录,新检测出1 756个微震事件,地震数量增加了1.3倍。基于检测后的余震目录计算最小完备震级为M_L1.2,地震活动性b值为0.76,较原始目录的M_L1.6和0.77均有所降低。通过伽师震源区地震序列活动特征分析,结果表明前震序列在主震前短时间内(前36小时)出现地震活动的密集增强,相应的b值显示为低值;主震发生后地震序列完备震级较高,随着时间的推移,完备震级缓慢降低并趋于稳定,并且呈周期性的波动。本研究提高了伽师震源区地震目录的完备性,为精细化描述该地区地震序列时空演化特征提供了关键数据基础。     

An improved earthquake catalogue (<Emphasis Type="Italic">M</Emphasis> ≥ 4.0) for Turkey and its near vicinity (1900–2012)

Many catalogues, agency reports and research articles have been published on seismicity of Turkey and its surrounding since 1950s. Given existing magnitude heterogeneity, erroneous information on epicentral location, event date and time, this past published data however is far from fulfilling the required standards. Paucity of a standardized format in the available catalogues have reinforced the need for a refined and updated catalogue for earthquake related hazard and risk studies. During this study, ~37,000 earthquakes and related parametric data were evaluated by utilizing more than 41 published studies and, an integrated database was prepared in order to analyse all parameters acquired from the catalogues and references for each event. Within the scope of this study, the epicentral locations of M ≥ 5.0 events were firstly reappraised based on the updated Active Fault Map of Turkey. An improved catalogue of 12.674 events for the period 1900–2012 was as a result recompiled for the region between 32–45N° and 23–48E° by analyzing in detail accuracy of all seismological parameters available for each event. The events consist of M ≥ 4.0 are reported in several magnitude scales (e.g. moment magnitude, M_w; surface wave magnitude, M_S; body-wave magnitude m_b; local magnitude M_L and duration magnitude M_d) whereas the maximum focal depth reaches up to 225-km. In order to provide homogenous data, the improved catalogue is unified in terms of M_w. Fore-and aftershocks were also removed from the catalogue and completeness analyses were performed both separately for various tectonic sources and as a whole for the study region of interest. Thus, the prepared homogenous and declustered catalogue consisting of 6573 events provides the basis for a reliable input to the seismic hazard assessment studies for Turkey and its surrounding areas.     

Studies on the June 23, 2010 north Ottawa M W 5.2 earthquake and vicinity seismicity

The basic parameters for the earthquake with a moment magnitude (M _W) of 5.2 on the 23rd of June 2010 have been investigated. The earthquake occurred on a hidden fault in the northwest direction about 60?km north-northeast of Ottawa in the Western Quebec Seismic Zone (WQSZ) and had a focal depth of about 21?km. The focal mechanism was a thrust type with strike in the northwest direction and dipping in the northeast direction. The relative relocations of seven larger aftershocks show that the source rupture area was about 6?km². The b value of the aftershock sequence was 0.8?C1.0, and the decay rate of the aftershocks was faster than normal cases. The dominant seismogenic depths are about 12 to 22?km in most parts of the WQSZ, while the seismogenic depth along the Ottawa?CBonnechere Graben can be as deep as 28?km. Based on the seismic activity in the WQSZ and vicinity since 1961, it seems that the periods of moderate earthquakes are about 6?C10?years.     

Calibration of magnitude scales for earthquakes of the Mediterranean

In order to provide the tools for uniform size determination for Mediterranean earthquakes over the last 50-year period of instrumental seismology, we have regressed the magnitude determinations for 220 earthquakes of the European-Mediterranean region over the 1977–1991 period, reported by three international centres, 11 national and regional networks and 101 individual stations and observatories, using seismic moments from the Harvard CMTs. We calibrate M(M₀) regression curves for the magnitude scales commonly used for Mediterranean earthquakes (M_L, M_WA, m_b, M_S, M_LH, M_LV, M_D, M); we also calibrate static corrections or specific regressions for individual observatories and we verify the reliability of the reports of different organizations and observatories. Our analysis shows that the teleseismic magnitudes (m_b, M_S) computed by international centers (ISC, NEIC) provide good measures of earthquake size, with low standard deviations (0.17–0.23), allowing one to regress stable regional calibrations with respect to the seismic moment and to correct systematic biases such as the hypocentral depth for M_S and the radiation pattern for m_b; while m_b is commonly reputed to be an inadequate measure of earthquake size, we find that the ISC m_b is still today the most precise measure to use to regress M_W and M₀ for earthquakes of the European-Mediterranean region; few individual observatories report teleseismic magnitudes requiring specific dynamic calibrations (BJI, MOS). Regional surface-wave magnitudes (M_LV, M_LH) reported in Eastern Europe generally provide reliable measures of earthquake size, with standard deviations often in the 0.25–0.35 range; the introduction of a small (±0.1–0.2) static station correction is sometimes required. While the Richter magnitude M_L is the measure of earthquake size most commonly reported in the press whenever an earthquake strikes, we find that M_L has not been computed in the European-Mediterranean in the last 15 years; the reported local magnitudes M_WA and M_L do not conform to the Richter formula and are of poor quality and little use, with few exceptions requiring ad hoc calibrations similar to the M_S regression (EMSC, ATH). The duration magnitude M_D used by most seismic networks confirms that its use requires accurate station calibrations and should be restricted only to events with low seismic moments.     

High magnitude global seismicity and lateral velocity gradients

Summary A new significant correlation has been sought between high magnitude global seismicity and lateral surface wave velocity gradients. Rayleigh wave velocity divisioning of Eurasia, Africa, Pacific Ocean, Atlantic Ocean and Indian Ocean into regions of similar group velocity dispersion character of 30 sec period bySanto andSato [1]³) has been mainly used for calculating the gradients. It is quite striking to note that all earthquakes of magnitude 8.6 and above during 1897–1956 have occurred in regions having gradients of the order of 1.5·10^–3 sec^–1.Finally, some potential areas for high magnitude earthquake occurrences are predicted and the possible velocity gradients in regions, where division pattern is not yet investigated like South America and Australia, are also estimated.N.G.R.I. Contribution No. 70-170.     

A Probabilistic Assessment of Earthquake Hazard Parameters in NW Himalaya and the Adjoining Regions

The maximum likelihood estimation method is applied to study the geographical distribution of earthquake hazard parameters and seismicity in 28 seismogenic source zones of NW Himalaya and the adjoining regions. For this purpose, we have prepared a reliable, homogeneous and complete earthquake catalogue during the period 1500–2010. The technique used here allows the data to contain either historical or instrumental era or even a combination of the both. In this study, the earthquake hazard parameters, which include maximum regional magnitude (M _max), mean seismic activity rate (λ), the parameter b (or β?=?b/log e) of Gutenberg–Richter (G–R) frequency-magnitude relationship, the return periods of earthquakes with a certain threshold magnitude along with their probabilities of occurrences have been calculated using only instrumental earthquake data during the period 1900–2010. The uncertainties in magnitude have been also taken into consideration during the calculation of hazard parameters. The earthquake hazard in the whole NW Himalaya region has been calculated in 28 seismogenic source zones delineated on the basis of seismicity level, tectonics and focal mechanism. The annual probability of exceedance of earthquake (activity rate) of certain magnitude is also calculated for all seismogenic source zones. The obtained earthquake hazard parameters were geographically distributed in all 28 seismogenic source zones to analyze the spatial variation of localized seismicity parameters. It is observed that seismic hazard level is high in Quetta-Kirthar-Sulaiman region in Pakistan, Hindukush-Pamir Himalaya region and Uttarkashi-Chamoli region in Himalayan Frontal Thrust belt. The source zones that are expected to have maximum regional magnitude (M _max) of more than 8.0 are Quetta, southern Pamir, Caucasus and Kashmir-Himanchal Pradesh which have experienced such magnitude of earthquakes in the past. It is observed that seismic hazard level varies spatially from one zone to another which suggests that the examined regions have high crustal heterogeneity and seismotectonic complexity.     

Primary component analysis method and reduction of seismicity parameters

Introduction Data mining (SHAO and YU, 2003) is a new kind of technique developed with database and artificial intelligence in recent years, which processes the data in the database to abstract the im- plied and pre-unknown, but potentially useful information and knowledge from large amounts of incomplete, noisy, blurring and stochastic data. For data mining, data purging is an important link beforehand that includes eliminating noise, making up lost domain, and deleting ineffective data, as…     

Partial breaking of a mature seismic gap: The 1987 earthquakes in New Britain

To better understand the mechanics of subduction and the process of breaking a mature seismic gap, we study seismic activity along the western New Britain subduction segment (147°E–151°E, 4°S–8°S) through earthquakes withm _b 5.0 in the outer-rise, the upper area of subducting slab and at intermediate depths to 250 km, from January 1964 to December 1990. The segment last broke fully in large earthquakes of December, 28, 1945 (M _s =7.9) and May 6, 1947 (M _s =7.7.), and its higher seismic potential has been recognized byMcCann et al., (1979). Recently the segment broke partially in two smaller events of February, 8, 1987 (M _s =7.4) and October 16, 1987 (M _s =7.4), leaving still unbroken areas.We observe from focal mechanisms that the outer-rise along the whole segment was under pronounced compression from the late 60's to at least October 1987 (with exception of the tensional earthquake of December 11, 1985), signifying the mature stage of the earthquake cycle. Simultaneously the slab at intermediate depths below 40 km was under tension before the earthquake of October 16, 1987. That event, with a smooth rupture lasting 32 sec, rupture velocity of 2.0 km/sec, extent of approximately 70 km and moment of 1.2×10²⁷ dyne-cm, did not change significantly the compressive state of stress in the outer-rise of that segment. The earthquake did not fill the gap completely and this segment is still capable of rupturing either in an earthquake which would fill the gap between the 1987 and 1971 events, or in a larger magnitude event (M _s =7.7–7.9), comparable to earthquakes observed in that segment in 1906, 1945 and 1947.     

Magnitude scale for the Central American tsunamis

Based on the tsunami data in the Central American region, the regional characteristic of tsunami magnitude scales is discussed in relation to earthquake magnitudes during the period from 1900 to 1993. Tsunami magnitudes on the Imamura-Iida scale of the 1985 Mexico and 1992 Nicaragua tsunamis are determined to bem=2.5, judging from the tsunami height-distance diagram. The magnitude values of the Central American tsunamis are relatively small compared to earthquakes with similar size in other regions. However, there are a few large tsunamis generated by low-frequency earthquakes such as the 1992 Nicaragua earthquake. Inundation heights of these unusual tsunamis are about 10 times higher than those of normal tsunamis for the same earthquake magnitude (M _s =6.9–7.2). The Central American tsunamis having magnitudem>1 have been observed by the Japanese tide stations, but the effect of directivity toward Japan is very small compared to that of the South American tsunamis.     

A change in seismicity near the Mid-America Trench following the Oaxaca earthquake

Immediately after the Oaxaca earthquake of November 29, 1978, the rate of occurrence of earthquakes (magnitude m_b ? 4.9) increased all along the Mid-America Trench, and stayed above the average level for the area for five months. The highest rate was recorded in the month just after the Oaxaca earthquake, after which the rate gradually declined for five months. No aftershocks of the Oaxaca earthquake are included in the counts. The past seismicity history of the area suggests that it is unlikely that the simultaneous timing is a simple matter of coincidences. These observations suggest that motion of the Cocos plate is episodic, and that stress changes are rapidly transmitted throughout the plate.     

Evaluation of earthquake activity along the Serghaya fault, Syria, from instrumental seismic data

This is a tentative study in order to characterize and identify the Serghaya fault in Syria through an analysis of its instrumentally observed earthquake activity for the period of 1995–2009. Different approaches are used to evaluate a- and b-values of the Gutenberg-Richter relation. It has been found that the computed b-values (around 1.5) are bigger than usually expected, which could be related either to incompleteness of earthquake catalogue or to invalidity of the Gutenberg-Richter model in the case of Serghaya fault. Based on several explanations of high b-values, existing in the literature, it can be inferred that the events recorded on the Serghaya fault occurred at small depths in the heterogeneous milieus under low stresses. A relative seismic quiescence from 1900 up to now is observed, whereas the biggest earthquake recorded during the study period does not exceed magnitude 3.9. Such quiescence does not reflect accurately an earthquake potential of the Serghaya fault and can probably indicate a large-magnitude earthquake occurrence in near future. The established earthquake catalogue must be necessarily completed in order to deeper characterize the real behavior of the Serghaya fault. Such a characterization, accompanied with seismic activity evaluation, could be used in the assessment of seismic hazard.     

Shallow seismicity, stress distribution and crustal deformation pattern in the Andaman-West Sunda arc and Andaman Sea, northeastern Indian Ocean

Shallow seismicity and available source mechanisms in the Andaman–westSunda arc and Andaman sea region suggest distinct variation in stressdistribution pattern both along and across the arc in the overriding plate.Seismotectonic regionalisation indicates that the region could be dividedinto eight broad seismogenic sources of relatively homogeneousdeformation. Crustal deformation rates have been determined for each oneof these sources based on the summation of moment tensors. The analysisshowed that the entire fore arc region is dominated by compressive stresseswith compression in a mean direction of N23^°, and the rates ofseismic deformation velocities in this belt decrease northward from 5.2± 0.65 mm/yr near Nias island off Sumatra and 1.12 ±0.13 mm/yr near Great Nicobar islands to as much as 0.4 ±0.04 mm/yr north of 8^°N along Andaman–Nicobar islandsregion. The deformation velocities indicate, extension of 0.83 ±0.05 mm/yr along N343^° and compression of 0.19 ±0.01 mm/yr along N73^° in the Andaman back arc spreadingregion, extension of 0.18 ± 0.01 mm/yr along N125^° andcompression of 0.16 ± 0.01 mm/yr along N35^° in NicobarDeep and west Andaman fault zone, compression of 0.84 ±0.12 mm/yr N341^° and extension of 0.77 ± 0.11 mm/yralong N72^° within the transverse tectonic zone in the Andamantrench, N-S compression of 3.19 ± 0.29 mm/yr and an E-Wextension of 1.24 ± 0.11 mm/yr in the Semangko fault zone ofnorth Sumatra. The vertical deformation suggests crustal thinning in theAndaman sea and crustal thickening in the fore arc and Semangko faultzones. The apparent stresses calculated for all major events range between0.1–10 bars and the values increase with increasing seismic moment.However, the apparent stress estimates neither indicate any significantvariation with faulting type nor display any variation across the arc, incontrast to the general observation that the fore arc thrust events showhigher stress levels in the shallow subduction zones. It is inferred that theoblique plate convergence, partial subduction of 90^°E Ridge innorth below the Andaman trench and the active back arc spreading are themain contributing factors for the observed stress field within the overridingplate in this region.     

Crustal structure and local seismicity in Colombia

Using P-wave travel time data from local seismicity, the crustal structure ofthe central and southern part of Colombia was determined. A very stableand narrow range of possible velocity models for the region was obtainedusing travel time inversion. This range of models was tested with earthquakelocations to select the best velocity model. The 1D velocity modelproposed has five layers over a halfspace, with interfaces at depths of 4,25, 32, 40 and 100 km and P-wave velocities of 4.8, 6.6, 7.0, 8.0, 8.1and 8.2 km/sec, respectively. According to this model the Moho lies at32 km depth on average. For P-waves, the station corrections range from–0.62 to 0.44 sec and for S-wave they range from –1.17 to 0.62 sec.These low variations in station residuals indicate small lateral velocitychanges and therefore the velocity model found should be well suited forearthquake locations and future starting model for 3D tomography studies.Using this new velocity model, the local earthquakes were relocated. Theshallow seismicity, < 30 km, clearly shows the borders betweentectonic plates and also the main fault systems in the region. The deepseismicity, > 80 km, shows two subduction zones in the country: theCauca subduction zone with a strike of N120^°E, dip of 35^°and thickness of 35 km, and the Bucaramanga subduction zone which has,for the northern part, a strike of N103^°E, dip of 27^° andthickness undetermined and, for the southern part, a strike ofN115^°E, dip of 40^° and thickness of 20 km. Based ondifferences of thickness of brittle crust in the subducted slab and spatialdistribution of the seismicity, the Cauca and Bucaramanga subduction zonesseem to represent independent processes. The Cauca subduction seems tobe connected to the process of the Nazca plate being subducted under theNorth Andes Block. In the Bucaramanga subduction zone, the transitionbetween southern and northern parts and changes in geometry of the slabseem to be gradual and there is no evidence of a tear in the slab, howeverthe local seismicity does not allow us to determine which plate or plates arebeing subducted. The Bucaramanga nest appears to be included into thesubducted slab.