首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 796 毫秒
1.
S-wave velocity structure beneath the Ailaoshan-Red River fault was obtained from receiver functions by using teleseismic body wave records of broadband digital seismic stations. The average crustal thickness, Vp/Vs ratio and Poisson’s ratio were also estimated. The results indicate that the interface of crust and mantle beneath the Ailaoshan-Red River fault is not a sharp velocity discontinuity but a characteristic transition zone. The velocity increases relatively fast at the depth of Moho and then increases slowly in the uppermost mantle. The average crustal thickness across the fault is 36―37 km on the southwest side and 40―42 km on the northeast side, indicating that the fault cuts the crust. The relatively high Poisson’s ratio (0.26―0.28) of the crust implies a high content of mafic materials in the lower crust. Moreover, the lower crust with low velocity could be an ideal position for decoupling between the crust and upper mantle.  相似文献   

2.
We use 15 seismic stations,crossing the Qinling orogen(QO),Weihe graben(WG)and Ordos block(OB),to study the crustal structures by receiver functions(RFs)methods.The results show quite a difference in crustal structures and materials of three tectonic units(orogenic belt,extentional basin and stable craton).The average crustal thickness in the northern QO is 37.8 km,and Poisson ratio is 0.247,which indicates the increase of felsic materials in QO.In the southern OB,the average crustal thickness is 39.2 km and Poisson ratio is 0.265.Comparatively high value of Poisson ratio is related with old crystallized base in the lower crust and shallow sediments.The artificial RFs reveal that low-velocity and thick sediments have a significant effect on phases of the Mohorovi i discontinuity(Moho).As a result,the Moho phases in WG are tangled.S-wave velocity(VS)inversion shows that there are shallow sediment layers with 4–8 km’s thickness and high velocity zones in the middle-lower crust in WG.Complex Moho structure and high velocity zone may have been induced by the activities of the Weihe faults series.  相似文献   

3.
A teleseismic profile consisting of 26 stations was deployed along 30°N latitude in the eastern Tibetan Plateau. By use of the inversion of P-wave receiver function, the S-wave velocity structures at depth from surface to 80 km beneath the profile have been determined. The inversion results reveal that there is significant lateral variation of the crustal structure between the tectonic blocks on the profile. From Linzhi north of the eastern Himalayan Syntaxis, the crust is gradually thickened in NE direction; the crustal thickness reaches to the maximum value (~72 km) at the Bangong-Nujiang suture, and then decreased to 65 km in the Qiangtang block, to 57―64 km in the Bayan Har block, and to 40―45 km in the Sichuan Basin. The eastern segment of the teleseismic profile (to the east of Batang) coincides geographically with the Zhubalong-Zizhong deep seismic sounding profile carried out in 2000, and the S-wave velocity structure determined from receiver functions is consistent with the P-wave velocity structure obtained by deep seismic sounding in respect of the depths of Moho and major crustal interfaces. In the Qiangtang and the Bayan Har blocks, the lower velocity layer is widespread in the lower crust (at depth of 30―60 km) along the profile, while there is a normal velocity distribution in lower crust in the Sichuan Basin. On an average, the crustal velocity ratio (Poisson ratio) in tectonic blocks on the profile is 1.73 (σ = 0.247) in the Lhasa block, 1.78 (σ = 0.269) in the Banggong-Nujiang suture, 1.80 (σ = 0.275) in the Qiangtang block, 1.86 (σ = 0.294) in the Bayan Har blocks, and 1.77 (σ = 0.265) in the Yangtze block, respectively. The Qiangtang and the Bayan Har blocks are characterized by lower S-wave velocity anomaly in lower crust, complicated Moho transition, and higher crustal Poisson ratio, indicating that there is a hot and weak medium in lower crust. These are considered as the deep environment of lower crustal flow in the eastern Tibetan Plateau. Flowage of the ductile material in lower crust may be attributable to the variation of the gravitational potential energy in upper crust from higher on the plateau to lower off plateau.  相似文献   

4.
Crustal structure beneath the Songpan—Garze orogenic belt   总被引:2,自引:0,他引:2  
The Benzilan-Tangke deepseismic sounding profile in the western Sichuan region passes through the Song-pan-Garze orogenic belt with trend of NNE.Based on the travel times and the related amplitudes of phases in the record sections,the 2-D P-wave crustal structure was ascertained in this paper.The velocity structure has quite strong lateral variation along the profile.The crust is divided into 5layers,where the first,second and third layer belong to the upper crust,the forth and fifth layer belong to the lower crust.The low velocity anomaly zone gener-ally exists in the central part of the upper crust on the profile,and it integrates into the overlying low velocity basement in the area to the north of Ma‘erkang.The crustal structure in the section can be divided into 4parts:in the south of Garze-litang fault,between Garze-Litang fault and Xianshuihe fault,between Xianshuihe fault and Longriba fault and in the north of Longriba fault,which are basically coincided with the regional tectonics division.The crustal thickness decreases from southwest to northeast along the profile,that is ,from62km in the region of the Jinshajiang River to 52km in the region of the Yellow River.The Moho discontinuity does not obviously change across the Xianshuihe fault basesd on the PmP phase analysis.The crustal average velocity along the profile is lower,about 6.30 km/s.The Benzilan-Tangke profile reveals that the crust in the study area is orogenic.The Xianshuihe fault belt is located in the central part of the profile,and the velocity is positive anomaly on the upper crust,and negative anomaly on the lower crust and upper mantle.It is considered as a deep tectonhic setting in favor of strong earthquake‘s accumulation and occurrence.  相似文献   

5.
We use observations recorded by 23 permanent and 99 temporary stations in the SE Tibetan plateau to obtain the S-wave velocity structure along two profiles by applying joint inversion with receiver functions and surface waves. The two profiles cross West Yunnan block(WYB),the Central Yunnan sub-block(CYB), South China block(SCB), and Nanpanjiang basin(NPB). The profile at ~25°N shows that the Moho interface in the CYB is deeper than those in the WYB and the NPB, and the topography and Moho depth have clear correspondence.Beneath the Xiaojiang fault zone(XJF), there exists a crustal low-velocity zone(LVZ), crossing the XJF and expanding eastward into the SCB. The NPB is shown to be of relatively high velocity. We speculate that the eastward extrusion of the Tibetan plateau may pass through the XJF and affect its eastern region, and is resisted by the rigid NPB, which has high velocity. This may be the main cause of the crustal thickening and uplift of the topography. In the Tengchong volcanic area, the crust is shown to have alternate high- and low-velocity layers, and the upper mantle is shown to be of low velocity. We consider that the magma which exists in the crust is from the upper mantle and that the complex crustal velocity structure is related to magmatic differentiation. Between the Tengchong volcanic area and the XJF, the crustal velocity is relatively high.Combining these observations with other geophysical evidence, it is indicated that rock strength is high and deformation is weak in this area, which is why the level of seismicity is quite low. The profile at ~23°N shows that the variation of the Moho depth is small from the eastern rigid block to the western active block with a wide range of LVZs. We consider that deformation to the south of the SE Tibetan Plateau is weak.  相似文献   

6.
Southwest Yunnan, located in the southern segment of the north-south seismic belt, is one of the regions with strong tectonic movement and seismic activity in China. Study on the characteristics of tectonic setting and deep geophysical field in the region is an important issue in basic science. In 2013, we conducted a 600-km-long Menghai-Gengma-Lushui profile of deep seismic wide-angle reflection/refraction and high-resolution seismic refraction in Southwest Yunnan. In this paper, we use 6 groups of clear intracrustal P-wave phases picked from the seismic record sections of 11 shots to build a velocity structure model of basement and 2D crustal P-wave of the region by using finite difference inversion and ray travel time forward fitting technology. The results show that, from south to north, the crust gradually thickens along the profile and its basement shows a significant lateral heterogeneity. In the vicinity of the Nanting River fault, the basement structure shows the character of alternate depressions and uplifts, and the shallowest basement is about 1.0 km. In the vicinity of Tengchong and Lancang, the basement is about 5.0 km deep. The velocity of the middle and lower crust in the region generally increases with the increasing of depth. At the block boundary and beneath the fault tectonic belt, the velocity contours show apparent irregularity and the P-wave velocity changes sharply. In this region, the Moho gradually deepens from south to north with relatively large lateral undulations. The shallowest point of the Moho is located near Menghai at a depth of about 32.0 km. The deepest point of the Moho is located near Tengchong at a depth of about 40.5 km. Between Gengma and Yongde, the Moho shows significantly fast uplifting and depressing with an amplitude of about 4.0 km. Beneath the Nanting River fault, Longling-Ruili fault, Dayingjiang fault and Tengchong volcano, the basement velocity structure, 2D crustal P-wave velocity structure, distribution of average profile velocity and intracrustal interface spreading also show significant changes from the basement to the top of the Moho, indicating that the crustal velocity and medium physical properties beneath the fault tectonic belt are apparently different from the crustal materials on its both sides, which suggests that these faults should be in a certain scale and may extend to the lower crust or the top of the upper mantle. The earthquakes in the region mainly occurred at a depth of 10–20 km, and the seismic activity is related to the intracrustal medium velocity difference and fault belt distribution. The results can serve as the important data of the crust-mantle structure for the analysis of the deep tectonic setting, earthquake precise positioning, seismogenic structure modeling of the seismic activities in Southwest Yunnan, as well as the important reference for the evaluation of seismic hazard and the planning of earthquake disaster mitigation of this region.  相似文献   

7.
The Deep Seismic Sounding( DSS) projects carried out from the 1970 s in the lower Yangtze region and its neighboring area were reviewed in this paper,then the basic wave group features of those wide angle reflection / refraction record sections,and of the crustal structure are summarized. It shows that there were in total five clear wave groups on the record sections,which include the first arrival Pg,the reflection P1 from the bottom interface of the upper crust,the reflection P3 from the bottom interface of the middle crust,the strong reflection Pm from the Moho boundary,and the refraction Pn from uppermost mantle. In general,these phases are easily consistently traced and compared,despite some first arrivals being delayed or arriving earlier than normal due to the shallow sedimentary cover or bedrocks. In particular,in the Dabie Mountain region the seismic events of a few gathered shots always have weak reflection energy,are twisted,or exhibit disorganized waveforms, which could be attributed to the disruption variations of reflection depth,the broken Moho,and the discontinuity of the reflection boundary within crust. The regional crustal structures are composed of the upper,middle and lower crust,of which the middle and lower layers can be divided into two weak reflection ones. The crustal thickness of the North China and Yangtze platform are 30km- 36 km,and the Moho exhibits a flat geometry despite some local uplifts. The average pressure velocity in lower crust beneath this two tectonic area is 6. 7 ± 0. 3km / s. Nevertheless,beneath the Dabieshan area the crustal thickness is 32km- 41 km,the Moho bends down sharply andtakes an abrupt 4km- 7km dislocation in the vertical direction. The average pressure velocity in the lower crust beneath the Dabieshan area is 6. 8 ± 0. 2km / s.  相似文献   

8.
Investigation has been made for the upper crust structure and seismotectionic environments in Yunnan Province using the plentiful DSS data of the four profiles.The derived velocity model has a good relationship with the ex-posed basins,uplifts and faults.The low velocity anomaly corresponding to the volcano also has been revealed.There exits a prominent lateral inhomogeneity within the upper crust of Yunnan region.The depth of crystalline basement generally ranges from 0km to 5km,and the bedrocks are exposed on the ground directly in some places,nevertheless the thickness of sedimentary cover also can reack to 8km or even 12km at some targe depressions.Although the Changning-Shuangjiang fault is a boundary between two first class tectonic units,its incision depth within the crust maybe shallow.On the other hand,known as the plates‘seam,the Honghe fault has a distinct evi-dence of extending into the mid-lower crust.The widely spread activity of the volcanoes in the geological era has a close relationship with the earthquake‘s occurrence nowadays.Despite of the ceasing of the volcanoes in some places on the ground,the material in the mid-lower crst is still active,and there still exists strong upward stress-As the ceasing of the volcanoes on the surface,most parts of the power from the lower crust and the upper mantle cannot be released;therefore it accumulates at some appropriate tectonic locations.Moreover,the saturation of the water from the basin,the action of other fluids,and the effects of the outer stress maybe another direct reason ac-count for the strong earthquakes‘occurrence in Yunnan region.  相似文献   

9.
2-D crustal velocity structure and vp/vs are obtained by processing and interpretation of S-wave data from Maqen-Jingbian deep seismic sounding(DSS)profile.The result shows that there exist obvious differences in 2-D S-wave velocity structure and vp/vs ratio structure along the profile.The S-wave velocities are low and vp/vs ration is high for the westem section of the profile and Haiyuan region,while they are normal for the middle and eastern sections.The changes in lithologic characters of two major anomalous zones are discussed according to lateral variation of S-wave velocity structure and vp/vs ratio structure.It is concluded that the development and occurrence of the Haiyuan strong earthquake is not only related to tectonic activities,but also to lithologic characters of the region.  相似文献   

10.
2-D crustal structure and velocity ratio are obtained by processing S-wave data from two wide-angle reflec-tion/refraction profiles in and around Jiashi in northeastern Pamir,with the result of P-wave data taken into con-sideration.The result shows that:1)Average crustal velocity ratio is obviously higher in Tarim block than in West Kunlun Mts.and Tianshan fold zone,which reflects its crustal physical property of “hardness“and stability.The relatively low but normal velocity ratio(Poisson‘s ratio)of the lower crust indicates that the “downward thrusting“ of Tarim basin is the main feature of crustal movement in this area.2)The rock layer in the upper crust of Tian-shan fold zone is relatively“soft“,which makes it prone to rupture and stress energy release.This is the primary tectonic factor for the concentration of small earthquakes in this area.3)Jiashi is located right over the apex or the inflection point of the updoming lower crustal interface C and the crust-mantle boundary,which is the deep struc-tural background for the occurrence of strong earthquakes.The alternate variation of vp/vs near the block bounda-ries and the complicated configuration of the interfaces in the upper and middle part of the upper crust form a par-ticular structural environment for the Jiashi strong earthquake swarm.vp/vs is comparatively high and shear modulus is low at the focal region,which may be the main reason for the low stress drop of the Jiashi strong earthquake swarm.  相似文献   

11.
青藏高原东南缘Moho面速度密度跃变研究   总被引:1,自引:0,他引:1       下载免费PDF全文
青藏高原东南缘地下深部结构的研究对了解青藏高原的变形机制和动力学过程具有重要意义.本文利用四川、云南固定台站记录到的远震波形资料,首先采用接收函数H-k叠加方法获得青藏高原东南缘台站下方的地壳厚度和波速比.进而利用接收函数一次转换波和多次波幅度信息确定了青藏高原东南缘Moho面上的S波速度和密度跃变.研究结果表明:研究区由南到北地壳厚度逐渐增加,从永德、沧源、孟连地区的33 km左右增至巴塘地区的69.7 km左右,厚度变化了近乎37 km.四川盆地和松潘甘孜块体南部的姑咱地区具有高泊松比、速度密度跃变较小特征,表明这两个地区含有较多铁镁物质.腾冲地区、龙门山西侧的汶川地区、四川盆地西南缘的沐川地区以及则木河断裂的石门坎至东川地区同属于高泊松比、速度密度跃变较大,显示这些地区壳内存在部分熔融.  相似文献   

12.
We recognized 6 sets of reflecting P- and S-wave events from Moho and other interfaces within the crust, respectively, with the wide-angle seismic data acquired from 510 km-long Selincuo-Ya'anduo profile in the northern Tibet, fitted the observed events with forward modeling, and interpreted crustal structure of P- and S-wave velocities and Poisson's ratio under the profile. The results demonstrate that the crustal structure between Yarlungzangbo and Bangong-Nujiang sutures changes abruptly, and the crust is the thickest at the middle part of the profile with thickness of 80 km or more. The "down-bowing" Moho is the striking feature for the crustal variation along the west-east direction. The Moho uplifts with steps, and the uplifting rate westward is greater than that eastward. The heterogeneity of P- and S-wave velocities exists both vertically and horizontally, and one lower velocity layer (LVL) exists with the depth range of 27-34 km and the thickness range of 5-7 km. For the upper crust, Poisson's ratio is the lowest at the middle part of the profile; for the lower crust, the Poisson's ratio at the east segment is lower than that at west segment, which means that the crustal rigidity for the upper crust is different from the lower crust, and the lower crust under the east segment of the profile is more ductile. We infer that the substance in the lower crust endured eastward flow along with the collision between Eurasian and Indian plates, and the "down-bowing" Moho is attributable to the multi-phase E-W tectonic processes.  相似文献   

13.
云南思茅—中甸地震剖面的地壳结构   总被引:7,自引:7,他引:7       下载免费PDF全文
张智  赵兵  张晰  刘财 《地球物理学报》2006,49(5):1377-1384
云南思茅—中甸宽角反射/折射地震剖面切割松潘—甘孜、扬子和华南三个构造单元的部分区域. 我们利用初至波和壳内反射波走时层析成像获得地壳纵波速度结构. 在获得新的地壳速度结构模型基础上,利用地震散射成像思想和低叠加次数的叠前深度偏移方法重建了研究区的地壳、上地幔反射结构. 综合分析研究区地壳P波速度模型和壳内地震反射剖面发现:沿测线从北至南地壳厚度从约50 km减薄至35 km左右,地壳厚度的减薄量主要体现在下地壳,剖面北段下地壳厚度约为30 km,剖面南段下地壳厚度仅为15 km左右;上地幔顶部局部位置P波速度值偏低,一般为76~78 km/s,反映出云南地区是典型的构造活动区的特点.剖面沿线地壳内地震反射发育,其中莫霍强反射出现在景云桥下方;在景云桥弧形断裂带8~10 km深处出现宽约50 km的强反射带.  相似文献   

14.
本文使用位于喜马拉雅东构造结地区布置的24个宽频带地震台站记录的远震波形数据,利用P波接收函数的方法研究了台站下方的Moho面深度、泊松比和地壳速度结构.结果表明,东构造结内Moho面深度呈现出自南西向北东方向逐渐变深的趋势,地壳厚度在54~60 km范围内,其中东久一米林走滑断裂带附近Moho面最浅,东构造结周围拉萨地块的Moho面深度在60 km以上.东构造结西部东久一米林走滑断裂带附近地壳泊松比较高.嘉黎断裂带南北两侧的泊松比差别较大,说明该断裂带两侧地壳结构存在显著差异.东构造结周边拉萨地块地壳内普遍存在低速层,分布在20~40 km深度范围内,厚度约为5~15 km.  相似文献   

15.
Based on the inversion method of 2D velocity structure and interface, the crustal velocity structures of P-wave and S-wave along the profile L1 are determined simultaneously with deep seismic sounding data in Changbaishan Tianchi volcanic region, and then its Poisson's ratio is obtained. Calculated results show that this technique overcomes some defects of traditional forward calculation method, and it is also very effective to determine Poisson's ratio distribution of deep seismic sounding profile, especially useful for study on volcanic magma and crustal fault zone. Study result indicates that there is an abnormally high Poisson's ratio body that is about 30 km wide and 12 km high in the low velocity region under Tianchi crater. Its value of Poisson's ratio is 8% higher than that of surrounding medium and it should be the magma chamber formed from melted rock with high temperature. There is a high Poisson's ratio zone ranging from magma chamber to the top of crust, which may be the uprise passage of hot substance. The lower part with high Poisson's ratio, which stretches downward to Moho, is possibly the extrusion way of hot substance from the uppermost mantle. The conclusions above are consistent with the study results of both tomographic determination of 3D crustal structure and magnetotelluric survey in this region.  相似文献   

16.
芦山与汶川地震之间存在约40 km的地震空区.震源区和地震空区的深部构造背景的研究对深入了解中强地震的深部孕育环境及地震空区的地震活动性具有重要科学意义.利用本小组布设的15个临时观测地震台以及21个芦山科考台站和21个四川省地震局固定台站记录的远震数据,用H-K叠加方法得到各个台站的地壳厚度和平均泊松比,并构建了接收函数共转换点(CCP)偏移叠加图像以及反演得到台站下方的S波速度模型.我们的结果揭示了震源区和地震空区地壳结构特征差异:(1)汶川震源区的地壳平均泊松比为~0.28;芦山震源区为~0.29;而地震空区处于泊松比变化剧烈的区域;(2)汶川地震与芦山地震的震源区以西下方的Moho面呈现深度上的突变(这与前人的研究成果基本一致),分别从~44 km突变到~59 km,~40 km突变到~50 km,而地震空区地壳平均厚度呈现渐变性变化;(3)地震空区Moho面下凹且具有低速的上地壳.综合一维S波速度结构和H-k以及CCP的初步结果,这可能显示汶川地震的发震断裂在深部方向上向西倾斜并形成切割整个地壳的大型断裂;芦山地震则可能是由于上、下地壳解耦引起的;而地震空区处于两种地震形成机制控制区域的过渡带中.  相似文献   

17.
利用接收函数方法研究四川地区地壳结构   总被引:3,自引:0,他引:3  
范军  朱介寿  江晓涛  吴朋 《地震》2015,35(1):65-76
采用接收函数反演和共转换点(CCP)偏移叠加成像方法, 利用四川数字地震台网宽频带的52个区域固定地震台站和布设的两条52个宽频带流动地震观测台站的远震地震波形数据资料, 对四川地区地壳结构进行研究。 结果表明, 四川地区的Moho面深度在青藏高原和四川盆地差异明显, 在川西高原地区地壳厚度为52~68 km, 在川滇地块地壳厚度为50~60 km, 在中地壳内存在不连续的低速层分布; 而在四川盆地地壳厚度为38~45 km, 地壳内没有低速层存在。 Moho面深度从川西高原的60多公里至四川盆地的约40 km, 在二者的交界处龙门山断裂带下面, 存在厚度约30 km左右宽的下降过渡带, 说明其下的Moho面可能受断层影响, 结构比较复杂; 在高原地区的上地壳界面和下地壳上界面比四川盆地的相应界面深; 高原地区在中地壳的上部有不连续的低速层分布, 在松潘—甘孜地块的上地壳下部存在向南东运动的脆性推覆体, 在羌塘—理塘地块的上地壳下部存在向南东和南运动的脆性物质流动。  相似文献   

18.
The receiver functions of body waves of distant earthquakes obtained for the regions beneath 41 digital stations (Lhasa and GANZ in Tibet, Mandalay and Rangoon in Myanmar, SHIO in India, CHTO in Thailand, and station network in Sichuan and Yunnan) were used to invert for S-wave structure in the crust and upper mantle in Sichuan, Yunnan, and their surrounding areas. Meanwhile the distribution characteristics of the Poisson’s ration and the crustal thickness in Sichuan and Yunnan areas were also obtained. Results indicate that the depth of Moho beneath the eastern side of Qinghai-Tibetan plateau varies strikingly. It is obvious that the greatest changes in crustal thickness occur in a north-south direction. The crustal thickness decreases from north to south, being as thick as 70 km in eastern Tibet, the northern portion of our area of interest, and less than 30 km in Chaing Mai and Rangoon, the southern portion of our area. There are, however, exceptions regarding the trend. The thickness exhibits an east-west variation trend in the area from Ma’erkong-Kongding in Sichuan to Lijiang in Yunnan. In general the Jinpingshan-Longmenshan fault and Anninghe fault can be taken as the boundaries of this exception area. The thickness in Kongding in the west is 68 km, while it is only 39 km in Yongchuan in the east. Moreover the Poisson’s ratio values in the blocks of central Sichuan and Sichuan-Yunnan Diamond are high, and a low velocity layer in the crust of this area can be obviously detected. The distribution characteristics of the high Poisson’s ratio and the low velocity of the crust in this block correspond to the tectonic structure, being in contrast with the surrounding areas. Combining with the distribution features of the modern tectonic stress field, it is deduced that the Sichuan-Yunnan area is probably the channel through which the materials of the lithosphere flow eastward.  相似文献   

19.
We recognized 6 sets of reflecting P- and S-wave events from Moho and other interfaces within the crust, respectively, with the wide-angle seismic data acquired from 510 km-long Selincuo-Ya’anduo profile in the northern Tibet, fitted the observed events with forward modeling, and interpreted crustal structure of P- and S-wave velocities and Poisson’s ratio under the profile. The results demonstrate that the crustal structure between Yarlungzangbo and Bangong-Nujiang sutures changes abruptly, and the crust is the thickest at the middle part of the profile with thickness of 80 km or more. The “down-bowing” Moho is the striking feature for the crustal variation along the west-east direction. The Moho uplifts with steps, and the uplifting rate westward is greater than that eastward. The heterogeneity of P- and S-wave velocities exists both vertically and horizontally, and one lower velocity layer (LVL) exists with the depth range of 27–34 km and the thickness range of 5–7 km. For the upper crust, Poisson’s ratio is the lowest at the middle part of the profile; for the lower crust, the Poisson’s ratio at the east segment is lower than that at west segment, which means that the crustal rigidity for the upper crust is different from the lower crust, and the lower crust under the east segment of the profile is more ductile. We infer that the substance in the lower crust endured eastward flow along with the collision between Eurasian and Indian plates, and the “down-bowing” Moho is attributable to the multi-phase E-W tectonic processes.  相似文献   

20.
云南数字地震台站下方的S波速度结构研究   总被引:36,自引:13,他引:36       下载免费PDF全文
通过对云南数字地震台站的宽频带远震接收函数反演,获得了云南地区数字地震台站下方0-0km深度范围的S波速度结构.结果表明,云南地区地壳厚度变化剧烈,中甸、丽江等西北部地区,地壳厚度达62km左右,景洪、思茅和沧源等南部地区,地壳厚度仅为32-34km.厚地壳从西北部向东南方向伸展,厚度和范围逐渐减小,至通海一带地壳厚度减为42km,其形态和范围与小江断裂和元江断裂围成的川滇菱形块体相一致.地壳厚度较小的东、南部地区Moho面速度界面明显;在地壳厚度较大或变化剧烈的地区,Moho面大多表现为S波速度的高梯度带.云南地区S波速度结构具有很强的横向不均匀性.km深度以上,北部地区S波速度明显低于南部地区,在-20km深度范围内,北部地区的S波速度比南部地区高.地壳内部S波速度界面的连续性较差,低速层的深度和范围不一,近一半的台站下方不存在明显的低速层.受南部地区上地幔的影响,40-50km深度范围内,S波速度南部高、北部低,高速区随深度增加逐渐向北推移,低速异常区形态与川滇菱形块体的形态趋向一致.70-80km深度的上地幔速度分布与云南地区大震分布具有一定的相关性.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号