Intra-crater glacial processes in central Utopia Planitia, Mars

We describe and interpret a series of previously unidentified glacial-like lobes (34-43°N; 107-125°E) that were discovered as part of a survey of large (D > 5 km) impact craters in Utopia Planitia, one of the great northern plains of Mars. The lobes have characteristics that are consistent with a glacial origin. Evidence includes curvilinearity of form, lineations and ridges, and surface textures that are thought to form by the sublimation of near-surface volatiles. The lobes display morphologies that range from wedge-shaped to near-circular to elongate. The flow directions are towards the northern walls in the case of craters with large single lobes, and in all directions in the case of the largest (D > 30 km) craters. Concentric crater fill is also interspersed within craters of our study region, with such craters having much higher filling rates than those with flow lobes. We suggest that the impact crater population in south-west Utopia Planitia demonstrates a spectrum of glacial modifications, from low levels of filling in the case of craters with elongate lobes at one extreme, to concentric crater fill in highly-filled craters at the other.     

Ejecta size-velocity relation derived from the distribution of the secondary craters of kilometer-sized craters on Mars

The relation between the size and velocity of impact crater ejecta has been studied by both laboratory experiments and numerical modeling. An alternative method, used here, is to analyze the record of past impact events, such as the distribution of secondary craters on planetary surfaces, as described by Vickery (Icarus 67 (1986) 224; Geophys. Res. Lett. 14 (1987) 726). We first applied the method to lunar images taken by the CLEMENTINE mission, which revealed that the size-velocity relations of ejecta from craters 32 and 40 km in diameter were similar to those derived by Vickery for a crater 39 km in diameter. Next, we studied the distribution of small craters in the vicinity of kilometer-sized craters on three images from the Mars Orbiter Camera (MOC) on board the Mars Global Surveyor (MGS). If these small craters are assumed to be secondaries ejected from the kilometer-sized crater in each image, the ejection velocities are of hundreds of meters per second. These data fill a gap between the previous results of Vickery and those of laboratory studies.     

Laboratory simulation of the herringbone pattern associated with lunar secondary crater chains

V-shaped ridge components of the herringbone pattern associated with lunar secondary crater chains have been simulated by simultaneous and nearly simultaneous impact of two projectiles near one another. The impact velocities and angles of the projectiles were similar to those of the fragments that produced secondary craters found at various ranges from large lunar craters.Variables found to affect the included angles of the V-shaped ridges are: relative time of impact of the projectiles, impact angle, relative projectile mass, and azimuth angle of the crater chain relative to the projection of the flight line onto the target surface. The functional relationships between the forms of the ridges and many of these variables are similar to those observed for lunar V-shaped ridges.Comparison of the magnitudes of the ridge angles of both laboratory crater pairs and secondary crater chains of the crater Copernicus implies that material was ejected from Copernicus at angles in excess of 60°, measured from the normal, to form many of Copernicus' satellitic craters. Moreover, other independent calculations presented indicate that many of the fragments that produced secondary craters also ricocheted to produce tertiary craters.Application of the study to identification of isolated secondary craters and to the determination of the origin of large lunar craters is discussed.     

Evidence for Hesperian impact-induced hydrothermalism on Mars

Several hydrated silicate deposits on Mars are observed within craters and are interpreted as excavated Noachian material. Toro crater (71.8°E, 17.0°N), located on the northern edge of the Syrtis Major Volcanic Plains, shows spectral and morphologic evidence of impact-induced hydrothermal activity. Spectroscopic observations were used to identify extensive hydrated silicate deposits, including prehnite, chlorites, smectites, and opaline material, a suite of phases that frequently results from hydrothermal alteration in terrestrial craters and also expected on Mars from geochemical modeling of hydrothermal environments. When combined with altimetry and high-resolution imaging data, these deposits appear associated predominantly with the central uplift and with portions of the northern part of the crater floor. Detailed geologic mapping of these deposits reveals geomorphic features that are consistent with hydrothermal activity that followed the impact event, including vent-like and conical mound structures, and a complex network of tectonic structures caused by fluid interactions such as fractures and joints. The crater age has been calculated from the cumulative crater size-frequency distributions and is found to be Early Hesperian. The evidence presented here provides support for impact-induced hydrothermal activity in Toro crater, that extends phyllosilicate formation processes beyond the Noachian era.     

The role of arcuate ridges and gullies in the degradation of craters in the Newton Basin region of Mars

A survey of craters in the vicinity of Newton Basin, using high-resolution images from Mars Global Surveyor and Mars Odyssey, was conducted to find and analyze examples of gullies and arcuate ridges and assess their implications for impact crater degradation processes. In the Phaethontis Quadrangle (MC-24), we identified 225 craters that contain these features. Of these, 188 had gullies on some portion of their walls, 118 had arcuate ridges at the bases of the crater walls, and 104 contained both features, typically on the same crater wall. A major result is that the pole-facing or equator-facing orientation of these features is latitude dependent. At latitudes >44° S, equator-facing orientations for both ridges and gullies are prevalent, but at latitudes <44° S, pole-facing orientations are prevalent. The gullies and arcuate ridges typically occupy craters between ∼2 and 30 km in diameter, at elevations between −1 and 3 km. Mars Orbiter Laser Altimeter (MOLA) elevation profiles indicate that most craters with pole-facing arcuate ridges have floors sloping downward from the pole-facing wall, and some of these craters show asymmetry in crater rim heights, with lower pole-facing rims. These patterns suggest viscous flow of ice-rich materials preferentially away from gullied crater walls. Clear associations exist between gullies and arcuate ridges, including (a) geometric congruence between alcoves and sinuous arcs of arcuate ridges and (b) backfilling of arcuate ridges by debris aprons associated with gully systems. Chronologic studies suggest that gullied walls and patterned crater floor deposits have ages corresponding to the last few high obliquity cycles. Our data appear consistent with the hypothesis that these features are associated with periods of ice deposition and subsequent erosion associated with obliquity excursions within the last few tens of millions of years. Arcuate ridges may form from cycles of activity that also involve gully formation, and the ridges may be in part due to mass-wasted, ice-rich material transported downslope from the alcoves, which then interacts with previously emplaced floor deposits. Most observed gullies may be late-stage features in a degradational cycle that may have occurred many times on a given crater wall.     

Nonuniform cratering of the Moon and a revised crater chronology of the inner Solar System

We model the cratering of the Moon and terrestrial planets from the present knowledge of the orbital and size distribution of asteroids and comets in the inner Solar System, in order to refine the crater chronology method. Impact occurrences, locations, velocities and incidence angles are calculated semi-analytically, and scaling laws are used to convert impactor sizes into crater sizes. Our approach is generalizable to other moons or planets. The lunar cratering rate varies with both latitude and longitude: with respect to the global average, it is about 25% lower at (±65°N, 90°E) and larger by the same amount at the apex of motion (0°N, 90°W) for the present Earth-Moon separation. The measured size-frequency distributions of lunar craters are reconciled with the observed population of near-Earth objects under the assumption that craters smaller than a few kilometers in diameter form in a porous megaregolith. Varying depths of this megaregolith between the mare and highlands is a plausible partial explanation for differences in previously reported measured size-frequency distributions. We give a revised analytical relationship between the number of craters and the age of a lunar surface. For the inner planets, expected size-frequency crater distributions are calculated that account for differences in impact conditions, and the age of a few key geologic units is given. We estimate the Orientale and Caloris basins to be 3.73 Ga old, and the surface of Venus to be 240 Ma old. The terrestrial cratering record is consistent with the revised chronology and a constant impact rate over the last 400 Ma. Better knowledge of the orbital dynamics, crater scaling laws and megaregolith properties are needed to confidently assess the net uncertainty of the model ages that result from the combination of numerous steps, from the observation of asteroids to the formation of craters. Our model may be inaccurate for periods prior to 3.5 Ga because of a different impactor population, or for craters smaller than a few kilometers on Mars and Mercury, due to the presence of subsurface ice and to the abundance of large secondaries, respectively. Standard parameter values allow for the first time to naturally reproduce both the size distribution and absolute number of lunar craters up to 3.5 Ga ago, and give self-consistent estimates of the planetary cratering rates relative to the Moon.     

Radar imagery of Mercury’s putative polar ice: 1999-2005 Arecibo results

We present an updated survey of Mercury’s putative polar ice deposits, based on high-resolution (1.5-km) imaging with the upgraded Arecibo S-band radar during 1999-2005. The north pole has now been imaged over a full range of longitude aspects, making it possible to distinguish ice-free areas from radar-shadowed areas and thus better map the distribution of radar-bright ice. The new imagery of the south pole, though derived from only a single pair of dates in 2005, improves on the pre-upgrade Arecibo imagery and reveals many additional ice features. Some medium-size craters located within 3° of the north pole show near-complete ice coverage over their floors, central peaks, and southern interior rim walls and little or no ice on their northern rim walls, while one large (90 km) crater at 85°N shows a sharp ice-cutoff line running across its central floor. All of this is consistent with the estimated polar extent of permanent shading from direct sunlight. Some craters show ice in regions that, though permanently shaded, should be too warm to maintain unprotected surface ice owing to indirect heating by reflected and reradiated sunlight. However, the ice distribution in these craters is in good agreement with models invoking insulation by a thin dust mantle. Comparisons with Goldstone X-band radar imagery indicate a wavelength dependence that could be consistent with such a dust mantle. More than a dozen small ice features have been found at latitudes between 67° and 75°. All of this low-latitude ice is probably sheltered in or under steep pole-facing crater rim walls, although, since most is located in the Mariner-unimaged hemisphere, confirmation must await imaging by the MESSENGER orbiter. These low-latitude features are concentrated toward the “cold longitudes,” possibly indicating a thermal segregation effect governed by indirect heating. The radar imagery places the corrected locations of the north and south poles at 7°W, 88.35°N and 90°W, 88.7°S, respectively, on the original Mariner-based maps.     

Applying machine learning to catalogue matching in astrophysics

We present the results of applying automated machine learning techniques to the problem of matching different object catalogues in astrophysics. In this study, we take two partially matched catalogues where one of the two catalogues has a large positional uncertainty. The two catalogues we used here were taken from the H  i Parkes All Sky Survey (HIPASS) and SuperCOSMOS optical survey. Previous work had matched 44 per cent (1887 objects) of HIPASS to the SuperCOSMOS catalogue.
A supervised learning algorithm was then applied to construct a model of the matched portion of our catalogue. Validation of the model shows that we achieved a good classification performance (99.12 per cent correct).
Applying this model to the unmatched portion of the catalogue found 1209 new matches. This increases the catalogue size from 1887 matched objects to 3096. The combination of these procedures yields a catalogue that is 72 per cent matched.     

Mercury: Radar images of the equatorial and midlatitude zones

Radar imaging results for Mercury's non-polar regions are presented. The dual-polarization, delay-Doppler images were obtained from several years of observations with the upgraded Arecibo S-band (λ12.6-cm) radar telescope. The images are dominated by radar-bright features associated with fresh impact craters. As was found from earlier Goldstone-VLA and pre-upgrade Arecibo imaging, three of the most prominent crater features are located in the Mariner-unimaged hemisphere. These are: “A,” an 85-km-diameter crater (348° W, 34° S) whose radar ray system may be the most spectacular in the Solar System; “B,” a 95-km-diameter crater (343° W, 58° N) with a very bright halo but less distinct ray system; and “C,” an irregular feature with bright ejecta and rays distributed asymmetrically about a 125-km source crater (246° W, 11° N). Due south of “C” lies a “ghost” feature (242° W, 27° S) that resembles “A” but is much fainter. An even fainter such feature is associated with Bartok Crater. These may be two of the best mercurian examples of large ejecta/ray systems observed in an intermediate state of degradation. Virtually all of the bright rayed craters in the Mariner 10 images show radar rays and/or bright rim rings, with radar rays being less common than optical rays. Radar-bright craters are particularly common in the H-7 quadrangle. Some diffuse radar albedo variations are seen that have no obvious association with impact ejecta. In particular, some smooth plains regions such as the circum-Caloris plains in Tir, Budh, and Sobkou Planitiae and the interiors of Tolstoj and “Skinakas” basins show high depolarized brightness relative to their surroundings, which is the reverse of the mare/highlands contrast seen in lunar radar images. Caloris Basin, on the other hand, appears dark and featureless in the images.     

Star catalogue in the fields of axial meridian circle of the Nikolaev observatory

On the base of CCD-observations made with the axial meridian circle of the Nikolaev Observatory from 2008 to 2009, we compiled a catalogue for astrometric positions and proper motions for 140321 stars located in an ecliptic zone and around high proper motion stars. The root-meansquare error for a star position is 20–65 mas in right ascension and 30–70 mas in declination. The UCAC2 catalogue is used as a reference for astrometric reductions. To derive stars’ proper motion and to estimate systematic errors of the compiled catalogue, cross-identification of the obtained data with modern astronomic catalogues Tycho2, 2MASS, CMC14, LSPM, PPMX, USNO-A2, and XPM-1.0 is performed. In addition to star position and proper motion, our catalogue contains photometric values B, V, r’, J, H, and K taken from other catalogues.     

Pulkovo combined catalogue of radio source positions PUL 2013

According to the decision of the International Astronomical Union (IAU), since 1998 the International Celestial Reference System has been realized by the ICRF catalogue of extragalactic radio source positions obtained from VLBI observations. Over the past years, the accuracy of the ICRF catalogue data has been increased only through an increase in the number and quality of observations and an improvement in the methods of their processing. Both the first ICRF version and the new ICRF2 version adopted by the IAU in 2009 are based on the catalogues obtained at the same VLBI data processing center. However, the experience of classical astrometry shows that a significant increase in the accuracy of the International Celestial Reference Frame can be achieved by creating combined catalogues, such as the fundamental catalogues of star positions. The same approach was applied to improve the ICRF catalogue. Even the first experience of such a combined solution has shown its high efficiency. Here, a new combined catalogue of radio source positions PUL(2013)C02 is presented. Mainly classical methods based on the expansion of the systematic differences between the input catalogues into series of orthogonal functions with additional improvements have been applied for its creation. Comparison of the combined catalogue obtained with the ICRF2 catalogue has shown that the latter is most likely not devoid of systematic errors at a level of 15–20 μas.     

Morphologic classification of Martian craters and some implications

A computer data bank containing information on crater sizes, locations, and morphologies for all craters visible on Mariner 9 wide-angle mapping photography was used to construct a crater morphologic classification. Four general classes were constructed that can be interpreted to represent increasing degrees of crater degradation. Fresh class craters are nearly unmodified and consist of deep bowl-shaped craters and deep, flat-floored craters with terraced walls. The slightly modified class consists of deep flat-floored craters that usually have raised rims, but lack the terracing, central peaks, and hummocky floors indicative of unmodified impact crater morphology. Craters in the modified class are rimless and shallow and those in the ghost class are rimless and extremely shallow. Retention ages for fresh (i.e. unmodified) class craters on equatorial cratered terrain range from millions to billions of years, depending on the impact flux history used. If the trend is toward billions of years, then present degradation rates on Mars are low relative to earlier history and most craters in the degraded classes were probably modified in an early (>3.3 b.y.?) period.     

Ejecta emplacement and modes of formation of martian fluidized ejecta craters

From an analysis of 1173 craters possessing single (Type I) and double (Type 2) concentric ejecta deposits, Type 2 craters are found to occur most frequently in areas that have also been described as possessing periglacial features. The frequency of occurence of central peaks and wall failure (terraces plus scallops) within the craters indicate that, by analogy with previous analyses, Type 1 craters form in more fragmental targets than Type 2 craters. The maximum range of the outer ejecta deposits of Type 2 craters, however, consistently extends ～0.8 crater radii further than ejecta deposits of Type 1 craters, suggesting a greater degree of ejecta fluidization for the twin-lobed Type 2 craters. Numerous characteristics of Ries Crater, West Germany, show similarities to craters on Mars, indicating that Martian fluidized ejecta craters may be closer analogs to this terrestrial crater than are lunar craters.     

Rays and secondary craters of Tycho

The large, fresh crater Tycho in the nearside lunar highlands has an extensive system of bright rays covering approximately 560,000 km², containing dense clusters of secondary craters. Examination of crater densities in several clusters shows that Tycho produced almost 10⁶ secondary craters larger than 63 m diameter. This is a lower limit, because small crater densities are reduced, most likely by mass wasting. We estimate a crater erasure rate of 2-6 cm/Myr, varying with crater size, and consistent with previous results. This process has removed many small craters, and it is probable that the original number of secondary craters formed by Tycho was higher. Also, we can only identify distant secondaries of Tycho where they occur in bright rays. Craters on Mars and Europa also formed large numbers of secondaries, but under possibly ideal conditions for spallation as a mechanism to produce high-velocity ejecta fragments. The results from Tycho show that large numbers of such fragments can be produced even from impact into a heavily fragmented target on which spallation is expected to be less important.     

Degradation of mid-latitude craters on Mars

Recent geomorphic, remote sensing, and atmospheric modeling studies have shown evidence for abundant ground ice deposits in the martian mid-latitudes. Numerous potential water/ice-rich flow features have been identified in craters in these regions, including arcuate ridges, gullies, and small flow lobes. Previous studies (such as in Newton Basin) have shown that arcuate ridges and gullies are mainly found in small craters (∼2-30 km in diameter). These features are located on both pole-facing and equator-facing crater walls, and their orientations have been found to be dependent on latitude. We have conducted surveys of craters >20 km in diameter in two mid-latitude regions, one in the northern hemisphere in Arabia Terra, and one in the southern hemisphere east of Hellas basin. In these regions, prominent lobes, potentially ice-rich, are commonly found on the walls of craters with diameters between ∼20-100 km. Additional water/ice-rich features such as channels, valleys, alcoves, and debris aprons have also been found in association with crater walls. In the eastern Hellas study region, channels were found to be located primarily on pole-facing walls, whereas valleys and alcoves were found primarily on equator-facing walls. In the Arabia Terra study region, these preferences are less distinct. In both study regions, lobate flows, gullies, and arcuate ridges were found to have pole-facing orientation preferences at latitudes below 45° and equator-facing orientation preferences above 45°, similar to preferences previously found for gullies and arcuate ridges in smaller craters. Interrelations between the features suggest they all formed from the mobilization of accumulated ice-rich materials. The dependencies of orientations on latitude suggest a relationship to differences in total solar insolation along the crater walls. Differences in slope of the crater wall, differences in total solar insolation with respect to wall orientation, and variations in topography along the crater rim can explain the variability in morphology of the features studied. The formation and evolution of these landforms may best be explained by multiple cycles of deposition of ice-rich material during periods of high obliquity and subsequent modification and transport of these materials down crater walls.     

A new approach to the calculation of the cratering rate of the Earth over the last 125 ± 20 Myr

The recent cratering record of the surface of the Earth is re-examined using a new technique that concentrates on estimating the mean areas occupied by individual craters, together with the gradients of linear plots of crater numbers versus crater ages. This analysis indicates that the lower limit of the rate at which craters have been produced over the last 125±20 Myr is, for example, (12.0±0.7)×10⁻¹⁵ km⁻² yr⁻¹ for D 2.4 km craters, (9.5±0.6)×10⁻¹⁵ km⁻² yr⁻¹ for D 5.0 km craters, (6.5±0.5)×10⁻¹⁵ km⁻² yr⁻¹ for D 12 km craters, and (3.0±0.3)×10⁻¹⁵ km⁻² yr⁻¹ for D 22 km craters. These figures indicate that previous researchers have considerably overestimated the rate at which small (2.4< D <20 km) craters are being produced. It is also found that the relationship between crater production rate and crater diameter is not a simple power law in the 2.4< D <40 km diameter range. On the most stable areas of the Earth's continents, and over the last 125±20 Myr it seems that the rate at which craters are eroded below the detection limit does not depend on crater diameter throughout the above size range.     

A comparison catalogue ofHii-regions

For complete information about the apparent distribution ofHii-regions along the whole galactic equator a Catalogue of 698 known emission nebulae is given on the basis of 13 lists and catalogues of these objects. The main catalogue used for the northern sky was that of Sharpless (1959) including 313 objects while the coverage of the southern sky can be characterized by a greater number of smaller catalogues represented in the first place by that of Rodgerset al. (1960) and that of Gum (1955). ForHii-regions, only optical data were taken into account.Where several authors describe the complex of nebulosities a more detailed specification of objects is preferred. The objects in the Catalogue are listed according to their right ascensions for 1950. As only three catalogues applied here give also the objects out of the belt ±15° around the galactic equator, the Catalogue is divided into two parts. The first (main) part contains 667 objects lying within this belt, the second contains 31 objects lying outside it. A Summary Table listing the objects from the two parts according to their galactic longitudes involving, in addition, the 50-yrs precession for every object is also added.An attempt was made not to repeat contingent errors present in the source-catalogues. The maps of the POSS were often used. Coincidences with SNR and planetaries were sought for independently of identifications given in the source-catalogues. The list of objects from the source-catalogues ofHii-regions excluded as SNR, planetaries and galaxies is also given.Astrophysics and Space Science Review Paper.     

Scaling of oblique impacts in frictional targets: Implications for crater size and formation mechanisms

Almost every meteorite impact occurs at an oblique angle of incidence, yet the effect of impact angle on crater size or formation mechanism is only poorly understood. This is, in large part, due to the difficulty of inferring impactor properties, such as size, velocity and trajectory, from observations of natural craters, and the expense and complexity of simulating oblique impacts using numerical models. Laboratory oblique impact experiments and previous numerical models have shown that the portion of the projectile’s kinetic energy that is involved in crater excavation decreases significantly with impact angle. However, a thorough quantification of planetary-scale oblique impact cratering does not exist and the effect of impact angle on crater size is not considered by current scaling laws. To address this gap in understanding, we developed iSALE-3D, a three-dimensional multi-rheology hydrocode, which is efficient enough to perform a large number of well-resolved oblique impact simulations within a reasonable time. Here we present the results of a comprehensive numerical study containing more than 200 three-dimensional hydrocode-simulations covering a broad range of projectile sizes, impact angles and friction coefficients. We show that existing scaling laws in principle describe oblique planetary-scale impact events at angles greater than 30° measured from horizontal. The displaced mass of a crater decreases with impact angle in a sinusoidal manner. However, our results indicate that the assumption that crater size scales with the vertical component of the impact velocity does not hold for materials with a friction coefficient significantly lower than 0.7 (sand). We found that increasing coefficients of friction result in smaller craters and a formation process more controlled by impactor momentum than by energy.