消能减震技术在某公共建筑改造加固中的应用

本文以某公共建筑改造工程为背景,针对改造过程中存在的大量梁、柱承载力不足,且主控参数超限等问题,提出了在框架结构中适当位置增设黏滞阻尼器的加固方案,使改造后的结构形成消能减震体系,减小地震作用。采用有限元软件分析了加固方案下结构在多遇和罕遇地震作用下的时程反应,研究了消能减震效果。结果表明,经加固改造后,各主控参数均可满足现行规范要求,大幅度提高了罕遇地震作用下结构抗震性能;通过合理设置黏滞阻尼器,减小了地震作用,大幅度缩小了梁、柱加固范围。     

某耗能减震框肢剪力墙转换结构分析

采用复合型铅粘弹性阻尼器对带转换层框肢剪力墙结构的某酒店进行了耗能减震设计,对耗能减震结构和钢支撑结构进行了对比分析,包括反应谱和局部非线性多遇地震作用和罕遇地震作用下的时程分析。结果表明,底部框架结构布置复合型铅粘弹性阻尼器后,在多遇和罕遇地震情况下层间位移能满足《建筑抗震设计规范》要求,并且采用耗能减震结构能优化整体结构,不会对转换层上部结构产生不利的影响,能更好地改善结构的抗震性能。     

某型钢混凝土框架核心筒消能减震结构的弹塑性分析

某工程位于昆明市,主体结构高153.1m,为型钢混凝土框架-剪力墙核心筒体系。建筑总高度超过了《高层建筑混凝土结构技术规程》中规定的B级高度,为提高结构的抗震性能,该工程采用消能减震技术控制结构的地震反应,对消能减震结构进行了设计,确定了消能器附加给结构的阻尼比值。为给结构设计提供可靠的参考依据,采用PERFORM-3D软件,对设有非线性粘滞阻尼器的该结构进行罕遇地震作用下动力弹塑性时程分析,评估该结构的整体性能及其构件的屈服情况,结果表明该消能减震结构基本能达到预期抗震性能目标。     

某高层框架剪力墙结构减震性能分析

为了研究剪切型铅阻尼器在高层建筑结构中的耗能减震效果,以高烈度地区某设置剪切型铅阻尼器的框架-剪力墙结构为工程背景,首先通过Sap2000分析了结构的动力特性,在此基础上对结构进行了消能减震设计。其次采用非线性分析软件ABAQUS对结构进行了罕遇地震作用下的有限元分析,对比了不同地震波作用下的结构弹塑性分析结果。分析结果表明:设置剪切型铅阻尼器的高层建筑结构的抗震性能较好,为剪切型铅阻尼器在高层框架-剪力墙结构中的应用提供了成功的工程案例,其设计思路可以为高层结构的减震提供有益的借鉴和参考。     

黏滞阻尼器在某大跨度钢桁架铁路梁桥中的应用研究

以某大跨度的铁路钢桁架连续梁桥为工程背景,基于有限元软件SAP2000建立其三维有限元模型,采用非线性动力时程分析方法分析了在罕遇地震作用下黏滞阻尼器对大跨度高墩连续钢桁架梁桥的减震效果,研究了黏滞阻尼器参数对减震效果的影响规律。研究结果表明:通过对黏滞阻尼器的合理布置和参数优化可以有效减小大跨铁路桥梁的主梁位移和墩底内力,显著改善其强震下的抗震性能。     

非线性粘滞阻尼器消能结构设计方法探讨

在建立非线形粘滞阻尼器消能结构性能曲线的基础上，建议了依据减震性能目标确定阻尼器参数的概略设计方法。提出了多自由度非线性粘滞阻尼器消能结构的等效阻尼比计算公式。在此基础上建议了适用于多自由度非线性粘滞阻尼器消能结构地震反应预测的模态叠加法，方法与时程分析结果对比吻合良好。为使各层阻尼器参数更好地满足减震性能要求，提出了将概略设计得到的层阻尼器参数依据减振性能目标进行调整的方法。     

考虑SSI效应的设圈梁构造柱农村民居振动台试验研究

将参数化建模的方法引入减震结构的分析与设计中,通过预设目标和迭代优化计算,以天水市某高层住宅消能减震结构为例,寻找最优的阻尼器布置方案。为评估和验证该消能减震结构的抗震性能,分别采用Perform 3D和ETABS等软件分析结构在多遇和罕遇地震作用下的结构响应,分析结果表明：小震作用下,消能减震结构的楼层位移、层间位移角、楼层弯矩及楼层剪力均减小6.5%以上,达到了设计要求;大震作用下,结构框架柱、框架梁、剪力墙和阻尼器能够满足既定的性能要求,层间位移角满足规范限值,能够达到“大震不倒”的设计目标,研究结果为实际工程预设减震目标和阻尼器优化布置提供参考。     

高烈度区某框架结构减震分析研究

为了研究设置金属阻尼器的框架结构的耗能减震效果,以某高烈度区超长框架结构为工程背景,通过有限元软件SAP2000分析了结构在罕遇地震作用下的抗震性能和减震效果。分析结构表明:设置金属阻尼器的某超长框架结构的抗震性能有了很大的提高,在罕遇地震作用下能够满足"大震不倒"的性能要求。     

高层医疗建筑消能减震技术应用研究

医疗类建筑是抗震救灾的重要场地,如何保证医疗建筑在发生地震时实现“大震不倒”甚至“功能不中断”,成为值得研究的关键问题。对于位于发震断层附近的医疗类建筑,本文以实际项目为例,采用粘滞阻尼器作为一种消能减震的手段,将减震结构与非减震结构在多遇地震和罕遇地震工况下的地震响应进行对比。结果表明:多遇地震工况下,粘滞消能器发生轴向拉压变形开始耗能,能够提供3%的附加阻尼比,主体结构地震力减小,结构构件尺寸较非减震结构能够更好地满足医疗建筑的使用要求;罕遇地震工况下,设置粘滞消能器的结构X与Y向最大层间位移角分别为1/214和1/230,结构塑性铰分布满足“强柱弱梁”的设计准则,整体结构基本满足“大震下功能不中断”的性能要求。     

罕遇地震下的屈曲约束支撑框架结构的动力响应研究

为分析支撑布置方式、刚度比、结构总层数等因素在罕遇地震下对屈曲约束支撑框架结构动力响应的影响,借助有限元分析软件SAP2000,分别对6层、12层、18层屈曲约束支撑框架结构模型进行了罕遇地震下的时程分析,详细研究了多高层结构体系的层间位移角、底层剪力、支撑内力等随支撑布置方式、刚度比、结构总层数等因素变化的规律。分析表明,倒V较单斜布置更能有效降低底层剪力、增大支撑轴力、降低层间位移角,从而降低结构的地震响应,更有利于结构消能减震;随着结构总层数的增大,支撑的屈服层数呈现出增多的趋势;刚度比七为2—4时,能使较多层数的屈曲约束支撑参与到消能减震的过程之中,较好地实现抗震设防目标。     

Development of elasto-plastic viscous damper finite element model for reinforced concrete frames

By advancing the technologies regarding seismic control of structures and development of earthquake resistance systems in the past decades application of different types of earthquake energy dissipation system has incredibly increased. Viscous damper device as a famous and the simplest earthquake energy dissipation system is implemented in many new structures and numerous number of researches have been done on the performance of viscous dampers in structures subjected to earthquake. The experience of recent severe earthquakes indicates that sometimes the earthquake energy dissipation devices are damaged during earthquakes and there is no function for structural control system. So, damage of earthquake energy dissipation systems such as viscous damper device must be considered during design of earthquake resistance structures.This paper demonstrates the development of three-dimensional elasto-plastic viscous damper element consisting of elastic damper in the middle part and two plastic hinges at both ends of the element which are compatible with the constitutive model to reinforce concrete structures and are capable to detect failure and damage in viscous damper device connections during earthquake excitation. The finite element model consists of reinforced concrete frame element and viscous damper element is developed and special finite element algorithm using Newmark׳s direct step-by-step integration is developed for inelastic dynamic analysis of structure with supplementary elasto-plastic viscous damper element. So based on all the developed components an especial finite computer program has been codified for “Nonlinear Analysis of Reinforced Concrete Buildings with Earthquake Energy Dissipation System”. The evaluation of seismic response of structure and damage detection in structural members and damper device was carried out by 3D modeling, of 3 story reinforced concrete frame building under earthquake multi-support excitation.     

Seismic analysis of diagrid structural frames with shear-link fuse devices

This paper presents a new concept for enhancing the seismic ductility and damping capacity of diagrid structural frames by using shear-link fuse devices and its seismic performance is assessed through nonlinear static and dynamic analysis.The architectural elegancy of the diagrid structure attributed to its triangular leaning member configuration and high structural redundancy make this system a desirable choice for tall building design.However,forming a stable energy dissipation mechanism in diagrid framing remains to be investigated to expand its use in regions with high seismicity.To address this issue,a diagrid framing design is proposed here which provides a competitive design option in highly seismic regions through its increased ductility and improved energy dissipation capacity provided by replaceable shear links interconnecting the diagonal members at their ends.The structural characteristics and seismic behavior(capacity,stiffness,energy dissipation,ductility) of the diagrid structural frame are demonstrated with a 21-story building diagrid frame subjected to nonlinear static and dynamic analysis.The findings from the nonlinear time history analysis verify that satisfactory seismic performance can be achieved by the proposed diagrid frame subjected to design basis earthquakes in California.In particular,one appealing feature of the proposed diagrid building is its reduced residual displacement after strong earthquakes.     

附加黏弹性阻尼与金属阻尼耗能的自复位墙结构抗震性能对比分析

相对传统结构,自复位墙结构在地震作用下具有更大的变形能力且几乎无残余位移,但其耗能能力较弱,需采用附加阻尼来增加整体耗能.目前,金属阻尼器已广泛用于自复位墙结构,其可显著减小结构大震下的地震响应,但小震下的位移和加速度减震效果不佳.因此,将小变形下即可耗能的黏弹性阻尼器应用于自复位墙结构中.设计一幢10层自复位墙结构,分别采用黏弹性阻尼器和 U 型金属阻尼器作为附加耗能构件,通过弹塑性时程分析对比采用两种耗能机制的结构地震响应.结果表明,黏弹性阻尼器可显著减小自复位墙结构在小震下的位移和加速度响应;U 型金属阻尼器在中震下开始耗能,在大震和巨震下,其减震效果会超越黏弹性阻尼器.因此,为进一步优化自复位墙结构在不同水准地震作用下的抗震性能,建议结合阻尼器的特点进行合理设计.     

基于耗能连梁钢板阻尼器的高层结构耗能减振分析及应用

为改善传统连梁钢板阻尼器的适用性,提出了一种新型耗能连梁钢板阻尼器的设计方法,通过对阻尼器工作区域的划分与设计,使新型阻尼器充分发挥耗能作用,有效地提高了结构整体耗能能力。基于有限元软件ABAQUS模拟低周反复荷载作用下墙肢与阻尼器的应力应变状态,以验证所提出的新型阻尼器的设计方法及端部嵌固区的可靠性,并通过对原结构和实施耗能连梁钢板阻尼器结构进行弹塑性时程分析,探讨其改进后的抗震性能。研究结果表明,新型嵌固区构造不仅能够保证阻尼器与墙肢协同工作良好,还能大大降低施工难度;通过实施该阻尼器,可形成耗能连梁及抗震多道防线,在连梁钢筋混凝土部分损伤较为严重的情况下,仍能保证连梁具有一定的延性和耗能能力。     

基于楼层剪力的等效阻尼比计算方法研究

针对现有附加有效阻尼比计算方法存在的问题,本文从能量的角度揭示了阻尼比对结构影响的机理。从结构设计的角度,提出一种在时程分析下基于楼层剪力的消能减震结构等效阻尼比计算方法。对布置黏滞阻尼器和软钢阻尼器的消能减震模型,采用本文提出的等效阻尼比计算方法,建立等效结构进行结构响应对比。结果表明,由该计算方法得到的等效阻尼比能够准确地评估阻尼器在结构中的耗能效果,建立的等效结构能够准确反映消能减震结构实际情况。基于楼层剪力的等效阻尼比计算方法通过等效结构楼层剪力大于或等于消能减震结构楼层剪力判断迭代完成,该方法计算过程不涉及阻尼器参数及结构形式,适用于所有阻尼器类型与结构类型。计算得到的等效结构进行设计能够确保结构设计的安全。     

Use of a shared tuned mass damper (STMD) to reduce vibration and pounding in adjacent structures

The dynamic response of tall civil structures due to earthquakes is very important to civil engineers. Structures exposed to earthquakes experience vibrations that are detrimental to their structural components. Structural pounding is an additional problem that occurs when buildings experience earthquake excitation. This phenomena occurs when adjacent structures collide from their out‐of‐phase vibrations. Many energy dissipation devices are presently being used to reduce the system response. Tuned mass dampers (TMD) are commonly used to improve the response of structures. The stiffness and damping properties of the TMD are designed to be a function of the natural frequency of the building to which it is connected. This research involves attaching adjacent structures with a shared tuned mass damper (STMD) to reduce both the structures vibration and probability of pounding. Because the STMD is connected to both buildings, the problem of tuning the STMD stiffness and damping parameters becomes an issue. A design procedure utilizing a performance function is used to obtain the STMD parameters to result in the best overall system response. Copyright © 2001 John Wiley & Sons, Ltd.     

Dynamic analysis method of a combined energy dissipation system and its experimental verification

A combined energy dissipation system is developed in this paper. In this system lead rubber dampers and their parallel connection with oil dampers are used in the braces of a structural frame. A dynamic analysis method of the system, including the modelling of the lead rubber damper and the oil damper, is proposed. In the analysis method, the restoring force characterestics of the lead rubber damper is simulated by the Bouc–Wen hysteretic model, and the behaviour of the oil damper is simulated by a velocity and displacement‐related model in which the contributions of the oil damper to the damping force and stiffness of the system are considered. A series of shaking table tests of a three‐storey steel frame with the combined energy dissipation system are carried out to evaluate the performance of the system and to verify the analysis method. The test and analysis show that the performance of the combined energy dissipation system is quite satisfactory and there is a good agreement between the analysis and test results, which indicates that the analysis method proposed in this paper is valid and suitable for the dynamic analysis of the combined energy dissipation system. Copyright © 2002 John Wiley & Sons, Ltd.     

Modeling of energy dissipation in structural devices and foundation soil during seismic loading

Though rocking shallow foundations could be designed to possess many desirable characteristics such as energy dissipation, isolation, and self-centering, current seismic design codes often avoid nonlinear behavior of soil and energy dissipation beneath foundations. This paper compares the effectiveness of energy dissipation in foundation soil (during rocking) with the effectiveness of structural energy dissipation devices during seismic loading. Numerical simulations were carried out to systematically study the seismic energy dissipation in structural elements and passive controlled energy dissipation devices inserted into the structure. The numerical model was validated using shaking table experimental results on model frame structures with and without energy dissipation devices. The energy dissipation in the structure, drift ratio, and the force and displacement demands on the structure are compared with energy dissipation characteristics of rocking shallow foundations as observed in centrifuge experiments, where shallow foundations were allowed to rock on dry sandy soil stratum during dynamic loading. For the structures with energy dissipating devices, about 70–90% of the seismic input energy is dissipated by energy dissipating devices, while foundation rocking dissipates about 30–90% of the total seismic input energy in foundation soil (depending on the static factor of safety). Results indicate that, if properly designed (with reliable capacity and tolerable settlements), adverse effects of foundation rocking can be minimized, while taking advantage of the favorable features of foundation rocking and hence they can be used as efficient and economical seismic energy dissipation mechanisms in buildings and bridges.     

Statistical performance analysis of seismic‐excited structures with active interaction control

This paper presents a statistical performance analysis of a semi‐active structural control system for suppressing the vibration response of building structures during strong seismic events. The proposed semi‐active mass damper device consists of a high‐frequency mass damper with large stiffness, and an actively controlled interaction element that connects the mass damper to the structure. Through actively modulating the operating states of the interaction elements according to pre‐specified control logic, vibrational energy in the structure is dissipated in the mass damper device and the vibration of the structure is thus suppressed. The control logic, categorized under active interaction control, is defined directly in physical space by minimizing the inter‐storey drift of the structure to the maximum extent. This semi‐active structural control approach has been shown to be effective in reducing the vibration response of building structures due to specific earthquake ground motions. To further evaluate the control performance, a Monte Carlo simulation of the seismic response of a three‐storey steel‐framed building model equipped with the proposed semi‐active mass damper device is performed based on a large ensemble of artificially generated earthquake ground motions. A procedure for generating code‐compatible artificial earthquake accelerograms is also briefly described. The results obtained clearly demonstrate the effectiveness of the proposed semi‐active mass damper device in controlling vibrations of building structures during large earthquakes. Copyright © 2003 John Wiley & Sons, Ltd.