Lineament Analysis and Geophysical Modelling of the Alba Patera Region on Mars

Global data sets of images, topography and gravity are available for Mars from several orbiter missions. At the eve of new global data from Mars Global Surveyor (MGS), the capabilities of 3D geophysical modelling based on areal topography and gravity data combined with geologic-tectonic image interpretation is demonstrated here. A unique structure is chosen for the model calculations: the Alba Patera volcanic complex at the northern border of the Tharsis rise. Five groups of graben are discriminated: Ceraunius Fossae, Catenae, Tantalus Fossae (radial group) radial to the Tharsis rise, mainly associated to the formation of Tharsis, and Alba and Tantalus Fossae (circular group), younger than the other graben and circular around Alba Patera. Combining 3D elastic flexure of the lithosphere due to a 3D topographic surface load with 3D gravity models results in a rather thick lithosphere (150–200 km) and thick crust (60–100 km). In another model estimate it has been assumed that the circular grabens are induced by the stresses from the surface load of Alba Patera. In a first order calculation the surface stresses under a point load have been determined resulting in a good correlation of the stress maximum with the location of the circular grabens for a 50-km thick lithosphere. This is in accordance with earlier results from this method, but in contradiction with the thick lithosphere derived from flexure-gravity models. One possibility for this contradiction may be that the different models represent two evolutionary points of Alba Patera. (1) The correlation of stresses with the circular grabens may represent an older stage of evolution with a thinner lithosphere. (2) The flexure-gravity models represent a younger to present stage with a thick lithosphere. The results of the lithosphere thicknesses are compared with an admittance calculation and different thermal evolution models which determine comparable thicknesses (150 km). More detailed models including 3D stress models should wait for new data sets from MGS. The results from the lineament analysis and geophysical modelling are summarized in an evolution model for Alba Patera.     

Tharsis block tectonics on Mars

The concept of block tectonics provides a framework for understanding many aspects of Tharsis and adjoining structures. This Tharsis block tectonics on Mars is manifested partly by mantle-related doming and partly by response to loading by subsequent volcanic construction. Although the origin of the volcanism from beneath Tharsis is a subject of controversy explanations have to include inhomogenities in Martian internal structure, energy distribution, magma accumulation and motion below the lithosphere. Thermal convection can be seen as a necessary consequence for transient initial phase of Martian cooling. This produced part of the elevated topography with tensional stresses and graben systems radial to the main bulge. The linear grabens, radial to the Tharsis center, can be interpreted to indicate rift zones that define the crustal block boundaries. The load-induced stresses may then have contributed on further graben and ridge formation over an extended period of time.On leave from Dept. of Astronomy University of Oulu, Oulu, Finland.     

Unveiling the origin of radial grabens on Alba Patera volcano by finite element modelling

The Tharsis region is an 8000-km-wide structural dome that incorporates a concentration of the main volcanic and tectonic activity on the Planet Mars. The area of structural doming is characterised by giant radial graben-dike systems. Nested on a set of these giant dikes to the northern side of Tharsis, is Alba Patera, one of the largest volcanoes in the planetary system. The regional dikes there are in arcuate arrangement and imply an E-W to NW-SE regional extension at Alba Patera. To assess the influence of regional and local tectonics, we studied the dike orientations on the volcano with Viking mosaic data and simulated plausible stress fields with finite element modelling. We found that the influence of a NW-SE regional extension was strong near the volcano centre but decreased rapidly in importance towards the northern pole, i.e., far from the Tharsis centre. By combining this regional stress with a broad uplift that is due to a buoyancy zone of about 1400 km in lateral extent and centred under Alba Patera, we reproduced the radial pattern of dike swarms that diverge from the Tharsis trend. Regional tectonics may have dominated the early stages of dike injection. During the evolution of Alba Patera, however, local updoming controlled the dike pattern, supporting the idea of a hotspot under Alba Patera. The well-expressed dike geometry and characteristics of Alba Patera provide an ideal example for comparative study with analogue hotspots on Earth where plate tectonics and active erosion may complicate the reconstruction of volcanic and tectonic history and the understanding of involved geodynamic processes.     

Magma chamber -related development of Alba Patera on Mars

The formation of the central calderas of the Alba Patera summit area is proposed to have been caused by collapse(s) into relatively shallow and wide magma chamber(s). The subduction or collapse of the whole central Alba Patera area and the formation of peripheral circular fossae grabens around it were caused by a deeper, wider and more primary magmatic process which was more directly connected to the ascending hot mantle.     

Polar wander of Mars: Evidence from giant impact basins

We investigate the polar wander of Mars in the last ∼4.2 Ga. We identify two sets of basins from the 20 giant impact basins reported by Frey [Frey, H., 2008. Geophys. Res. Lett. 35, L13203] which trace great circles on Mars, and propose that the great circles were the prevailing equators of Mars at the impact times. Monte Carlo tests are conducted to demonstrate that the two sets of basins are most likely not created by random impacts. Also, fitting 63,771 planes to randomly selected sets of 5, 6, or 7 basins indicated that the identified two sets are unique. We propose three different positions for the rotation pole of Mars, besides the present one. Accordingly, Tharsis bulge was initially formed at ∼50 N and moved toward the equator while rotating counterclockwise due to the influence of the two newly forming volcanic constructs, Alba Patera and Elysium Rise. The formation of the giant impact basins, subsequent mass concentrations (mascons) in Argyre, Isidis, and Utopia basins, and surface masses of volcanic mountains such as Ascraeus, Pavonis, Arsia and Olympus, caused further polar wander which rotated Tharsis bulge clockwise to arrive at its present location. The extensive polar motion of Mars during 4.2-3.9 Ga implies a weak lithosphere on a global scale, deduced from a total of 72,000 polar wander models driven by Tharsis bulge, Alba Patera and Elysium Rise as the major mass perturbations. Different compensation states, 0-100%, are examined for each of the surface loads, and nine different thicknesses are considered for an elastic lithosphere. The lithosphere must have been very weak, with an elastic thickness of less than 5 km, if the polar wander was driven by these mass perturbations.     

Tectonic histories between Alba Patera and Syria Planum, Mars

Syria Planum and Alba Patera are two of the most prominent features of magmatic-driven activity identified for the Tharsis region and perhaps for all of Mars. In this study, we have performed a Geographic Information System-based comparative investigation of their tectonic histories using published geologic map information and Mars Orbiter Laser Altimetry (MOLA) data. Our primary objective is to assess their evolutional histories by focusing on their extent of deformation in space and time through stratigraphic, paleotectonic, topographic, and geomorphologic analyses. Though there are similarities among the two prominent features, there are several distinct differences, including timing deformational extent, and tectonic intensity of formation. Whereas Alba Patera displays a major pulse of activity during the Late Hesperian/Early Amazonian, Syria Planum is a long-lived center that displays a more uniform distribution of simple graben densities ranging from the Noachian to the Amazonian, many of which occur at greater distances away from the primary center of activity. The histories of the two features presented here are representative of the complex, long-lived evolutional history of Tharsis.     

A plume tectonics model for the Tharsis province, Mars

Morphological and structural data from the whole Tharsis province suggest that a number of shallow grabens radially oriented about the Tharsis bulge on Mars are underlain by dykes, which define giant radiating swarms similar to, e.g. the Mackenzie dyke swarm of the Canadian shield. Mechanisms for graben formation are proposed, and the depth, width, and height of the associated dykes are estimated. Structural mapping leads to define successive stages of dyke emplacement, and provide stress-trajectory maps that indicate a steady source of the regional stress during the whole history of the Tharsis province. A new tectonic model of Tharsis is presented, based on an analogy with dyke swarms on the Earth that form inside hot spots. This model successfully matches the following features: (1) the geometry of the South Tharsis Ridge Belt, which may have been a consequence of the compressional stress field at the boundary between the uplifted and non-uplifted areas in the upper part of the lithosphere at the onset of hot spot activity; (2) extensive lava flooding, interpreted as a consequence of the high thermal anomaly at the onset of plume (hot spot) activity; (3) wrinkle ridge geometry in the Tharsis hemisphere, the formation of which is interpreted as a consequence of buoyant subsidence of the brittle crust in response to the lava load; (4) Valles Marineris limited stretching by preliminary passive rifting, and uplift, viewed as a necessary consequence of adiabatic mantle decompression induced by stretching. The geometrical analysis of dyke swarms suggests the existence of a large, Tharsis-independent extensional state of stress during all the period of tectonic activity, in which the minimum compressive stress is roughly N---S oriented. Although magmatism must have loaded the lithosphere significantly after the plume activity ceased and be responsible for additional surface deformations, there is no requirement for further loading stress to explain surficial features. Comparison with succession of magmatic and tectonic events related to hot spots on the Earth suggests that the total time required to produce all the surface deformation observed in the Tharsis province over the last 3.8 Ga does probably not exceed 10 or 15 Ma.     

Gravity studies of the Tharsis area on Mars

The Tharsis rise on Mars with a diameter of about 8000 km and an elevation up to 10 km shows extensive volcanism and an extensional fracture system. Other authors explained this structure by (I) an uplift due to mantle processes and by (II) volcanic construction. Gravity models of four profiles are in accordance with a total Airy isostatic compensation of the whole rise with mean crustal thicknesses of 50 km and 100 km. But two regions exhibit significant mass deficits: (i) the area between Olympus Mons and the three large Tharsis volcanoes and (ii) central Tharsis. This can be explained by (1) a heated upper mantle, (2) a chemically modified upper mantle, (3) a crustal thickening, or (4) a combination of these three processes. Crustal thickening is mainly a constructional process, but the mass deficit should contribute to a certain degree of uplift causing the extensional area of Labyrinthus Noctis. Gravity modelling results in a different isostatic state of the three Tharsis volcanoes. Pavonis Mons is not compensated, Ascraeus Mons is highly or totally compensated, and Arsia Mons is medium or not compensated. The large, flat volcanic structure Alba Patera has been explained by a hot spot with an evolution of a mantle diapir.The results have shown that the Tharsis rise is a very complex structure. The central and eastern part of the rise is characterized by extensional features and a mass deficit (Extensional Province). The western part is dominated by many volcanic features and a central elongated mass deficit (Volcanic Province). The northern part consists of Alba Patera. It seems unlikely that the whole rise has been generated by one stationary large axisymmetric plume or hot spot. There could have been one or more active hot spots with an evolution in space and time.Contribution Nr. 421, Institut für Geophysik der Universität Kiel, Germany.     

Tharsis province of Mars: Geologic sequence,geometry, and a deformation mechanism

The early history of Mars included two large-scale events of great significance: (1) the lowering and resurfacing of one-third of the crust, followed closely by (2) evolution of the Tharsis bulge. Tharsis development apparently involved two stages: (1) an initial rapid topographic rise accompanied by the development of a vast radial fault system, and (2) an extremely long-lived volcanic stage apparently continuing to the geologic present. A deformational model is proposed whereby a first-order mantle convection cell caused early subcrustal erosion and foundering of the low third of the planet. Underplating and deep intrusion by the eroded materials beneath Tharsis caused isostatic doming. Minor radial gravity motions of surficial layers off the dome produced the radial fault system. The hot underplate eventually affected the surface to cause the very long-lived volcanic second stage. Deep crustal anisotropy associated with the locally NE-trending boundary between the highland two-thirds and the lowland one-third caused the NE elongation of many features of Tharsis.     

Tharsis Tholus: an unusual martian volcano

Tharsis Tholus is unusual martian shield volcano in that the edifice is cut by a series of large normal faults that appear to penetrate the entire volcano. Northeast-trending narrow graben also cut the flank. The large normal faults may be caused by loading of a ductile subsurface layer allowing failure of the edifice; the narrow graben are typical tensional faults. The flank is heavily mantled by aeolian material. Despite the bulbous appearance, the overall morphology of Tharsis Tholus suggests it is a basaltic shield. Crater counts indicate an age of early Hesperian placing Tharsis Tholus in the middle of the period of activity that built the other small Tharsis volcanoes.     

Mapping of the Culann-Tohil region of Io from Galileo imaging data

We have used Galileo spacecraft data to produce a geomorphologic map of the Culann-Tohil region of Io's antijovian hemisphere. This region includes a newly discovered shield volcano, Ts?i Goab Tholus and a neighboring bright flow field, Ts?i Goab Fluctus, the active Culann Patera and the enigmatic Tohil Mons-Radegast Patera-Tohil Patera complex. Analysis of Voyager global color and Galileo Solid-State Imaging (SSI) high-resolution, regional (50-330 m/pixel), and global color (1.4 km/pixel) images, along with available Galileo Near-Infrared Mapping Spectrometer (NIMS) data, suggests that 16 distinct geologic units can be defined and characterized in this region, including 5 types of diffuse deposits. Ts?i Goab Fluctus is the center of a low-temperature hotspot detected by NIMS late during the Galileo mission, and could represent the best case for active effusive sulfur volcanism detected by Galileo. The Culann volcanic center has produced a range of explosive and effusive deposits, including an outer yellowish ring of enhanced sulfur dioxide (SO₂), an inner red ring of SO₂ with short-chain sulfur (S₃-S₄) contaminants, and two irregular green diffuse deposits (one in Tohil Patera) apparently produced by the interaction of dark, silicate lava flows with sulfurous contaminants ballistically-emplaced from Culann's eruption plume(s). Fresh and red-mantled dark lava flows west of the Culann vent can be contrasted with unusual red-brown flows east of the vent. These red-brown flows have a distinct color that is suggestive of a compositional difference, although whether this is due to surface alteration or distinct lava compositions cannot be determined. The main massif of Tohil Mons is covered with ridges and grooves, defining a unit of tectonically disrupted crustal materials. Tohil Mons also contains a younger unit of mottled crustal materials that were displaced by mass wasting processes. Neighboring Radegast Patera contains a NIMS hotspot and a young lava lake of dark silicate flows, whereas the southwest portion of Tohil Patera contains white flow-like units, perhaps consisting of ‘ponds’ of effusively emplaced SO₂. From 0°-15° S the hummocky bright plains unit away from volcanic centers contains scarps, grooves, pits, graben, and channel-like features, some of which have been modified by erosion. Although the most active volcanic centers appear to be found in structural lows (as indicated by mapping of scarps), DEMs derived from stereo images show that, with the exception of Tohil Mons, there is less than 1 km of relief in the Culann-Tohil region. There is no discernable correlation between centers of active volcanism and topography.     

Episodes of floods in Mangala Valles,Mars, from the analysis of HRSC,MOC and THEMIS images

The Mangala Valles is a 900-km long outflow channel system in the highlands adjacent to the south-eastern flank of the Tharsis bulge. This work was intended to answer the following two questions unresolved in previous studies: (1) Was there only one source of water (Mangala Fossa at the valley head which is one of the Medusae Fossae troughs or graben) or were other sources also involved in the valley-carving water supply, and (2) Was there only one episode of flooding (maybe with phases) or were there several episodes significantly separated in time. The geologic analysis of HRSC image 0286 and mapping supported by analysis of MOC and THEMIS images show that Mangala Valles was carved by water released from several sources. The major source was Mangala Fossa, which probably formed in response to magmatic dike intrusion. The graben cracked the cryosphere and permitted the release of groundwater held under hydrostatic pressure. This major source was augmented by a few smaller-scale sources at localities in (1) two mapped heads of magmatic dikes, (2) heads of two clusters of sinuous channels, and (3) probably several large knob terrain locals. The analysis of results of crater counts at more than 60 localities showed that the first episode of formation of Mangala Valles occurred ～3.5 Ga ago and was followed by three more episodes, one occurred ～1 Ga ago, another one ～0.5 Ga ago, and the last one ～0.2 Ga ago. East of the mapped area there are extended and thick lava flows whose source may be the eastern continuation of the Mangala source graben. Crater counts in 10 localities on these lava flows correlate with those taken on the Mangala valley elements supporting the idea that the valley head graben was caused by dike intrusions. Our observations suggest that the waning stage of the latest flooding episode (～0.2 Ga ago) led to the formation at the valley head of meander-like features sharing some characteristics with meanders of terrestrial rivers. If this analogy is correct this could suggest a short episode of global warming in Late Amazonian time.     

Erosion and tectonics in Central Valles Marineris (Mars): a new morpho-structural model

In order to explain the development of Central Valles Marineris, a new morphostructural model is proposed. This model involves three major phases, including (i) initiation of graben patterns and pit crater chains under an early extensional phase, (ii) formation of wide grabens during major faulting, local rifting, and erosional phase, (iii) late faulting and secondary volcanic activity, possibly related to renewed updoming of East Tharsis. Based on detailed morphologic studies presented in a companion paper (Peulvast and Masson, this issue), the role of erosional processes in Central Valles Marineris landforming is discussed.     

Polygonal impact craters in Argyre region,Mars: Implications for geology and cratering mechanics

Abstract— Impact craters are not always circular; sometimes their rims are composed of several straight segments. Such polygonal impact craters (PICs) are controlled by pre‐existing target structures, mainly faults or other similar planes of weakness. In the Argyre region, Mars, PICs comprise ? 17% of the total impact crater population (>7 km in diameter), and PICs are relatively more common in older geologic units. Their formation is mainly controlled by radial fractures induced by the Argyre and Ladon impact basins, and to a lesser extent by the basin‐concentric fractures. Also basin‐induced conjugate shear fractures may play a role. Unlike the PICs, ridges and graben in the Argyre region are mostly controlled by Tharsis‐induced tectonism, with the ridges being concentric and graben radial to Tharsis. Therefore, the PICs primarily reflect an old impact basin‐centered tectonic pattern, whereas Tharsis‐centered tectonism responsible for the graben and the ridges has only minor influence on the PIC rim orientations. According to current models of PIC formation, complex PICs should form through a different mechanism than simple PICs, leading to different orientations of straight rim segments. However, when simple and complex PICs from same areas are studied, no statistically significant difference can be observed. Hence, in addition to enhanced excavation parallel to the strike of fractures (simple craters) and slumping along the fracture planes (complex craters), we propose a third mechanism involving thrusting along the fracture planes. This model is applicable to both simple and small complex craters in targets with some dominating orientations of structural weakness.     

Topography of Martian central volcanoes

New topographic maps of six large central volcanoes on Mars are presented and discussed. These features are Olympus Mons, Elysium Mons, Albor Tholus, Ceraunius Tholus, Uranius Tholus, and Uranius Patera. Olympus Mons has the general form of a terrestrial basaltic shield constructed almost entirely from lava flows; but with 20 to 23 km of relief it is far larger. Flank slopes average about 4°. A nominal density calculated from the shield volume and the local free-air gravity anomaly is so high that anomalously dense lithosphere probably underlies the shield. Uranius Patera is a similar feature of much lower present relief, about 2 km, but its lower flanks have been buried by later lava flood deposits. Elysium Mons has about 13 km of local relief and average slopes of 4.4°, not significantly steeper than those of Olympus Mons. Its upper flank slopes are significantly steeper than those of Olympus Mons. We suggest Elysium Mons is a shield volcano modified and steepened by a terminal phase of mixed volcanic activity. Alternatively, the volcano may be a composite cone. Albor Tholus is a partially buried 3-km-tall shield-like construct. Ceranius and Uranius Tholus are steeper cone-like features with relief of about 6 and 2 km, respectively. Slopes are within the normal range for terrestrial basaltic shields, however, and topographic and morphologic data indicate burial of lower flanks by plains forming lavas. These cones may be lava shield constructs modified by a terminal stage of explosive activity which created striking radial patterns of flank channels. Differences among these six volcanoes in flank slopes and surface morphology may be primarily consequences of different terminal phases of volcanic activity, which added little to the volume of any construct, and burial of shallow lower flanks by later geologic events. Additional topographic data for Olympus Mons, Arsia Mons, and Hadriaca Patera are described. The digital techniques used to extract topographiv data from Viking Orbiter stereo images are also described.     

Radar,visual and thermal characteristics of Mars: Rough planar surfaces

High-resolution Viking Orbiter images (10 to 15 m/pixel) contain significant information on Martian surface roughness at 25- to 100-m lateral scales, whereas Earth-based radar observations of Mars are sensitive to roughness at lateral scales of 1 to 30 m, or more. High-rms slopes predicted for the Tharsis-Memnonia-Amazonis volcanic plains from extremely weak radar returns (low peak radar cross section) are qualitatively confirmed by the Viking image data. Large-scale, curvilinear (but parallel) ridges on lava flows in the Memnonia Fossae region are interpreted as innate flow morphology caused by compressional foldover of moving lava sheets of possible rhyolite-dacite composition. The presence or absence of a recent mantle of fine-grained eolian material on the volcanic surfaces studied was determined by the visibility of fresh impact craters with diameters less than 50 m. Lava flows south and west of Arsia Mons, and within the large region of low thermal inertia centered on Tharsis Montes (H. H. Kieffer et al., 1977, J. Geophys. Res.82, 4249–4291), were found to possess such a recent mantle. At predawn residual temperatures ≥ ?10K (south boundary of this low-temperature region), lava flows are shown to have relatively old eolian mantles. Lava flows with surfaces modified by eolian erosion and deposition occur west-northwest of Apollinaris Patera at the border of the cratered equatorial uplands and southern Elysium Planitia. Nearby yardangs, for which radar observations indicate very high-rms slopes, are similar to terrestrial features of similar origin.     

Geologic mapping of the Zal region of Io

We produced a regional geologic map of the Zal region of Io's antijovian hemisphere using Galileo mission data. We discuss the geologic features, summarize the map units and structures that are present, discuss the nature of volcanic activity, and present an analysis of the volcanic, tectonic, and gradational processes that affect the region. The Zal region consists of five primary types of geologic materials: plains, mountains, paterae floors, flows, and diffuse deposits. The flows and patera floors are similar, but are subdivided based on uncertainties regarding emplacement environments and mechanisms. The Zal region includes two hotspots detected by Galileo: one along the western scarp of the Zal Patera volcano and one at the Rustam Patera volcano (name submitted to IAU). A third hotspot at the nearby At'am Patera volcano (name submitted to IAU) is the source of diffuse and pyroclastic materials that blanket north Zal Mons. The western bounding scarp of Zal Patera is the location of a fissure vent that is the source of multiple silicate lava flows. The floor of Zal Patera has been partially resurfaced by dark lava flows, although portions of the patera floor appear bright and unchanged during the Galileo mission. This suggests that the floor did not undergo complete resurfacing as a flooding lava lake but does contain a compound flow field. Mountain materials exhibit stages of degradation; lineated material degrades into mottled material. We have explored the possibility that north and south Zal Mons were originally one structure. We propose that strike-slip faulting and subsequent rifting separated the mountain units, opened a fissure which serves as a vent for lava flow, and created a depression which, by further extension during the rifting event, became Zal Patera. With comparison to other regional maps of Io, this work provides insight into the general geologic evolution of Io.     

Ancient dorsa-related stresses of the tharsis region on Mars

Topographic information, surface structures and construction of the Martian Tharsis bulge are used to estimate the previous stresses across the low-lying peripheral margins of the crustal blocks in terms of simple compensation models. Hot mantle activity, crustal roots, isostasy, and late-stage extensive lithosphere thickening together with volcanic building have been in combined response to the high-elevated Tharsis bulge. The initial phases of the Tharsis building have been dominated by the mantle plume doming, followed by extrusional dome raising. The volcanism has been most important bulge building factor only after thickening of the crust. During the initial mantle-generated doming and igneous activity the thin-lithosphere block tectonics has been very important. There has been a compressional peripheral zone around the bulge giving rise to dorsa formation while the high bulge crests have been in tensional state. The situation may be favorable for comparative studies with other planets. We may have something to learn from this block tectonics on the one-plate planet Mars even in respect to the Earth's plate tectonic paradigm.On leave from Dept. of Astronomy, University of Oulu, Finland.     

Does a detachment level exist beneath the Ceraunius Fossae? Insights from graben mapping and lost-area balancing analysis

We took advantage of the close relationship between graben width and rheology of the involved materials (e.g., number, thickness and spacing of rheological layers, presence of mechanical discontinuities of different nature) and attempted to obtain information about the mechanical stratigraphy of the Ceraunius Fossae area (Northern Tharsis Region). The possible existence of detachment levels beneath the Ceraunius Fossae area were investigated using the lost-area balancing method and a topographic profile derived from Mars Orbiter Laser Altimeter (MOLA) data. Results suggest a marked difference in structural style between the western and eastern sectors of the study area, which is interpreted as a result of different mechanical stratigraphies. On the western sector the maximum depth reached by grabens is well localized within 1000 m from the topographic surface suggesting the existence of a detachment level, which we interpret as a weak horizon at the base of the Late Hesperian-Early Amazonian units. The ductile behaviour of this horizon could be favoured by the presence of volatile reservoir or ice. In the eastern sector of the profile (HNf and Hf units) the maximum depth reached by the grabens is scattered and does not support the existence of clearly defined detachment horizons suggesting that Noachian Fractured Rocks are mechanically homogeneous. A maximum depth, however, could be established.     

Lava lakes on Io: New perspectives from modeling

Loki Patera (310° W, 12° N) is Io's largest patera at ∼180 km in diameter. Its morphology and distinct thermal behavior have led researchers to hypothesize that Loki Patera may either be an active lava lake that experiences periodic overturn, or a shallow depression whose floor is episodically resurfaced with thin flows. Using results from mathematical models, we suggest that a better model for Loki's behavior is the terrestrial superfast spreading East Pacific Rise (EPR), near 17°^30′ south. We propose that, like at the southern EPR, Loki Patera is underlain by a thin, persistent magma “lens” that feeds thin, temporary lava lakes within the patera. Also like the southern EPR, overspilling of the volcanic depression is rare, with most of the lava volume being emplaced via a subsurface network of lava tubes.