U-Pb geochronology of the Grenville Orogen of Ontario and New York: constraints on ancient crustal tectonics

Based on lithological, structural and geophysical characteristics, the Proterozoic Grenville Orogen of southern Ontario and New York has been divided into domains that are separated from each other by ductile shear zones. In order to constrain the timing of metamorphism, U-Pb ages were determined on metamorphic and igneous sphenes from marbles, calc-silicate gneisses, amphibolites, granitoids, skarns and pegmatites. In addition, U-Pb ages were obtained for monazites from metapelites and for a rutile from an amphibolite. These mineral ages constrain the timing of mineral growth, the duration of metamorphism and the cooling history of the different domains that make up the southern part of the exposed Grenville Orogen. Based on the ages from metamorphic minerals, regional and contact metamorphism occurred in the following intervals:Central Granulite Terrane:Adirondack Highlands: 1150 Ma; 1070–1050 Ma; 1030–1000 MaCentral Metasedimentary Belt:Adirondack Lowlands 1170–1130 MaFrontenac domain 1175–1150 MaSharbot Lake domain ca. 1152 MaFlzevir domain: 1240 Ma; 1060–1020 MaBancroft domain: ca. 1150 Ma; 1045–1030 MaCentral Gneiss Belt: ca. 1450 Ma; ca. 1150 Ma; 1100–1050 MaGrenville FrontTectonic Zone ca. 1000 Ma.Combination of mineral ages with results from thermobarometry indicates that metamorphic pressures and temperatures recorded by thermobarometers were reached polychronously in the different domains that are separated by major shear zones. Some of these shear zones such as the Robertson Lake shear zone and the Carthage-Colton shear zone represent major tectonic boundaries. The Grenville Orogen is made up of a collage of crustal terranes that have distinct thermal and tectonic histories and that were accreted laterally by tectonic processes analogous to those observed along modern active continental margins. The subsequent history of the orogen is characterized by slow time-integrated cooling rates of 3±1°C/Ma and denudation rates of 120±40m/Ma.     

Tectonic evolution of the Aravalli orogen (NW India): an inverted Proterozoic rift basin?

The Aravalli mountain range (AMR) in the northwestern part of the Indian Peninsula consists of two main Proterozoic metasedimentary and metaigneous sequences, the Aravalli and Delhi Supergroups, respectively, which rest over the Archaean gneissic basement. A synthesis and reinterpretation of the available geological, geochronological and geophysical data, including results of own field work and geophysical interpretations pertaining to the AMR, indicate its origin as an inverted basin: rifting into granitoid basement began ca. 2.5; Ga ago with Aravalli passive rifting (ca. 2.5–2.0 Ga) and Delhi active rifting (ca. 1.9–1.6 Ga). Associated mafic igneous rocks show both continental and oceanic tholeiitic geochemistry and are comparable with Phanerozoic, rift-related magmatic products. Available data showed no conclusive evidence for oceanic lithoshere and island-arc/active margin magmatic activity in the AMR. Subsequent inversion and orogeny (Delhi orogeny, ca. 1.5-1.4 Ga) lead to complex deformation and metamorphism. Only in the western and central zones has the basement been involved in this mid-Proterozoic (Delhi) deformation, whereas it is unaffected in the eastern part, except for local shear zones mainly along the basement/cover interface. The grade of metamorphism increases from the greenschist facies in the east to the amphibolite facies in the west with local HP assemblages. These latter are explained by rapid burial and exhumation of thin and cool continental lithosphere. Subsequently, during a final, mild phase of inversion, the Vindhyan basins consisting mainly of sandstones, limestones and shales, flanking the AMR formed which are comparable to foreland basins. The tectonic evolution of the AMR is therefore interpreted as an example of a major inverted continental rift and of a Proterozoic intra-continental orogen.     

A fission-track and (U–Th)/He thermochronometric study of the northern margin of the South China Sea: An example of a complex passive margin

Zircon fission track (ZFT), apatite fission track (AFT) and (U–Th)/He thermochronometric data are used to reconstruct the Cenozoic exhumation history of the South China continental margin. A south to north sample transect from coast to continental interior yielded ZFT ages between 116.6 ± 4.7 Ma and 87.3 ± 4.0, indicating that by the Late Cretaceous samples were at depths of 5–6 km in the upper crust. Apatite FT ages range between 60.9 ± 3.6 and 37.3 ± 2.3 Ma with mean track lengths between 13.26 ± 0.16 µm and 13.95 ± 0.19 µm whilst AHe ages are marginally younger 47.5 ± 1.9–15.3 ± 0.5 Ma. These results show the sampled rocks resided in the top 1–1.5 km of the crust for most of the Cenozoic. Thermal history modeling of the combined FT and (U–Th)/He datasets reveal a common three stage cooling history which differed systematically in timing inland away from the rifted margin. 1) Initial phase of rapid cooling that youngs to the north, 2) a period of relative (but not perfect) thermal stasis at ~ 70–60 °C which increases in duration from the south to the north; 3) final-stage cooling to surface temperatures that initiated in all samples between 15 and 10 Ma. The timing and pattern of rock uplift and erosion does not fit with conventional passive margin landscape models that require youngest exhumation ages to be concentrated at or close to the rifted margin. The history of South China margin is more complex aided by weakened crust from the active margin period that immediately preceded rifting and opening of the South China Sea. This rheological inheritance created a transition zone of steeply thinned crust that served as a flexural filter disconnecting the northern margin of the South China block and site of active rifting to the south. Consequently whilst the South China margin displays many features of a rifted continental margin its exhumation history does not conform to conventional images of a passive margin.     

Juxtaposition of India and Madagascar: A Perspective

Proterozoic terrains in South India and Madagascar provide important clues in understanding the Gondwanaland tectonics, especially the assembly of this mega-continent during the Pan-African period. The Archaean terrains in both Madagascar and India are characterized by N-S trending greenstone belts occurring within gneissose granitic rocks in the northern part. Extensive development of K-rich granitic rocks of ca. 2.5 Ga is also characteristic in both areas. Such a broad age zonation of younger Dharwar (ca 2.6–3.0 Ga) in the north and the older Sargur (ca 3.0–3.4 Ga) in the south as in South India remains to be identified in future studies from Madagascar. The occurrence of greenschist facies rocks in the northeastern part and higher grade rocks in most of other parts in the north-central terrain of Madagascar is comparable with the general tendency of increasing metamorphic grade from northwestern to southern areas ranging from greenschist to granulite facies in South India. The Proterozoic crystalline rocks in both continents show pronounced lithological similarity with the wide occurrence of graphite-bearing khondalite in association with charnockitic rocks. While the Archaean-Proterozoic boundary is well defined in southern India by the Palghat-Cauvery or the KKPT shear zones as recently identified, this boundary is ill-defined in Madagascar due to extensive Pan-African overprinting, as well as the development of the Proterozoic cover sequence, the Itremo Group. There is also a possible general correlation between the Mesoproterozoic cover sequences in Madagascar and India, such as between the Itremo Group of west-central Madagascar and the Kaladgi and Cuddapah sequences of South India. The Pan-African granulite facies metamorphism of ca. 0.5 Ga extensively developed in both India and Madagascar is generally comparable in intensity and extent. P-T conditions and P-T-t paths also appear comparable, with the general range of ca. 700–1000°C and 6–9 kb, and near-isothermal decompressional paths. A-type granite plutons and alkaline rocks including anorthosites and mafic plutonic rocks of ca. 500–800 Ma develop in both terrains, provide strong basis for the correlation of both terrains, and define a Pan-African igneous province within East Gondwanaland. Major shear zones in both continents are expected to play a critical role in the correlation, albeit are still poorly constrained. Detailed elucidation of the tectonic history of the shear zones, and the timing of various events along the shear zones would provide important constraints on the correlation of the two continental fragments.     

扬子地块东北缘中元古代的大地构造

扬子地块东北缘存在四条主要的中元古代变质带，自南向北依次为江南变质带，沿江变质带，云台－张八岭变质带和连云港－泗阳变质带。它们分别为中元古代的古弧后盆地，火山岛弧，裂谷及弧前盆地。扬子地块东北缘中元古代为活动大陆边缘构造体系，苏胶变质造山带应解体，其中一部分属扬子大陆边缘体系。     

Denudation History of South China Block and Sediment Supply to Northern Margin of the South China Sea

On the basis of apatite fission track (AFT) analyses,this article aims to provide a quantitative overview of Cenozoic morphotectonic evolution and sediment supply to the northern margin of the South China Sea (SCS).Seventeen granite samples were collected from the coast to the inland of the South China block.Plots of AFT age against sample location with respect to the coastline show a general trend of youngling age away from the coast,which implies more prolonged erosion and sediment contribution at the inland of the South China Sea during post break-up evolution.Two-stage fast erosion process,Early Tertiary and Middle Miocene,is deduced from simulated cooling histories.The first fast cooling and denudation during Early Tertiary are recorded by the samples along the coast (between 70 and 60 Ma) and the inland (between 50 and 30 Mu),respectively.This suggests initial local erosion and deposition in the northern margin of the SCS during Early Tertiary.Fast erosion along the coast ceased since ca.50 Ma,while it had lasted until ca.30 Ma inland,indicating that the erosion was transferred from the local coastal zone initially toward the continental interior with unified subsidence of the northern margin,which resulted in the formation of a south-dipping topography of the continental margin.The thermal stosis in the South China block since ca.30 Mu must det'me the time at which the northern margin became dynamically disconnected from the active rifting and stretching that was taking place to the south.The lower erosion rate is inconsistent with higher sedimentary rate in the Pearl River Mouth basin during Late Oligocene (ca.25 Ma).This indicates that the increased sedimentation in the basin is not due to the erosion of the granite belt of the South China block,but perhaps points to the westward propagation of the paleo-Pearl River drainage related to the uplift of the eastern margin of Tibet plateau and southward jumping of spreading axis of the South China Sea.The socond erosion acceleration rate of the Middle Miocene (ca.14 Ma) cooling could have been linked to the long-distance effect of uplift of the Tibet plateau or due to the enhanced East Asian monsoon.     

再论冀北古缝合带的证据

近南北走向的冀北太古宙麻粒岩相古陆核北侧受到近东西走向的古元古代造山带的交切。在陆缘沉积增生带内发现大量残存的古洋壳残片，包括蛇纹石化方辉橄榄岩、且鬣刺结构的苦橄岩、透闪石岩、橄长岩、异剥钙榴岩、细碧岩、退变榴辉岩、基性枕状熔岩和斜长花岗岩等，与陆缘沉积岩一起构成古蛇绿岩混杂带。推断该蛇绿岩混杂带从古元古代开始直到新元古代末有逐步向北后退发育的特点。     

Gold and silver metallogeny of the South China Fold Belt: a consequence of multiple mineralizing events?

The South China Fold Belt is part of the South China Block that is interpreted to be the result of multiple tectonic and magmatic events that formed a collage of accreted Proterozoic and Phanerozoic terranes. The Jurassic to early Cretaceous Yanshanian period (180–90 Ma), a time of major tectono-thermal events that affected much of eastern and southeastern China, is of great metallogenic importance in the fold belt. This period is linked to subduction of the Pacific plate beneath the Eurasian continent, and is manifested by voluminous volcano-plutonic activity of predominantly calc-alkaline affinity.The distribution of gold and silver deposits in the South China Fold Belt indicates the presence of two distinct metallogenic provinces. A region of basement uplifts, which are controlled by shear zones and form Neoproterozoic inliers of metamorphosed iron-rich rock types, defines the first province. In this province, orogenic lodes and volcanic-related epithermal deposits represent the more significant precious-metal mineralization. The second province is essentially confined to a belt of Yanshanian felsic–intermediate volcanic and subvolcanic rocks that extends along most of the southeastern China coast in an area known as the Coastal Volcanic Belt. Deposits in the Coastal Volcanic Belt are silver- and/or copper-rich, volcanic-hosted and epithermal in character.The precious-metal metallogeny of the South China Fold Belt is interpreted to have developed in at least three stages: one as a result of collision events, during the Caledonian Orogeny (ca. 400 Ma), the second during the Indosinian Orogeny (ca. 200 Ma) and the third during or soon after the formation of the Yanshanian magmatic belt (Yanshanian Orogeny; 180–90 Ma). The latter was responsible for a hydrothermal event that affected large sections of the belt and its Proterozoic substrate. This may have resulted in the redistribution and enrichment of precious metals from preexisting orogenic gold lodes in Neoproterozoic basement rocks, which are now exposed as windows in zones of tectonic uplift. The Yanshanian hydrothermal activity was particularly widespread in the Coastal Volcanic Belt and resulted in the formation of both low- and high-sulfidation epithermal gold and silver, and locally copper and other base-metal mineralization. It is suggested that the Coastal Volcanic Belt has greater potential for world-class epithermal and porphyry deposits than previously realised.     

A new concept on tectonic correlation between Korea, China and Japan: Histories from the late Proterozoic to Cretaceous

The Dabie–Sulu collision belt in China extends to the Hongseong–Odesan belt in Korea while the Okcheon metamorphic belt in Korea is considered as an extension of the Nanhua rift within the South China block. The Hongseong–Odesan belt divides Korea's Gyeonggi massif into northern and southern portions. The southern Gyeonggi massif and the Yeongnam massif are correlated with China's Yangtze and Cathaysia blocks, respectively, while the northern Gyeonggi massif is part of the southern margin of the North China block. The southern and northern Gyeonggi massifs rifted from the Rodinia supercontinent during the Neoproterozoic, to form the borders of the South China and North China blocks, respectively. Subduction commenced along the southern and eastern borders of the North China block in the Ordovician and continued until a Triassic collision between the North China and South China blocks. While subduction was occurring on the margin of the North China block, high-P/T metamorphic belts and accretionary complexes developed along the inner zone of southwest Japan from the Ordovician to the Permian. During the subduction, the Hida belt in Japan grew as a continental margin or continental arc. Collision between the North and South China blocks began in Korea during the Permian (290–260 Ma), and propagated westwards until the Late Triassic (230–210 Ma) creating the sinistral TanLu fault in China and the dextral fault in the Hida and Hida marginal belt in Japan. Phanerozoic subduction and collision along the southern and western borders of the North China block led to formation of the Qinling–Dabie–Sulu–Hongseong–Hida–Yanji belt.     

An evolutionary model of the western churchill province and western margin of the superior province in Canada and the North-Central United States

Regional-scale geophysical information, which includes aeromagnetic, gravity, seismic refraction, multi-channel seismic reflection and electromagnetic induction data, is used to extend our knowledge of the Canadian Shield beneath the Phanerozoic Williston basin of south-central Canada and the north-central United States. A new tectonic map based on this information shows the Proterozoic Flin Flon-Snow Lake and La Ronge-Lynn Lake volcanic island arcs and their associated fore-arc (Kisseynew belt) and back-arc (Reindeer-South Indian Lakes belt) basins wedged between the Archean Superior craton on the east and the Archean parts of the Churchill and Wyoming cratons on the west. Along the western margin of the Superior craton the Thompson nickel belt, including its extension southwards beneath the Williston basin, is interpreted to have been successively the site of continental rifting and rupturing, an evolving continental margin, a continent-volcanic island arc “suture” zone and eventually a continental-scale strike-slip fault. The North American Central Plains electrical conductivity anomaly and closely related seismic low-velocity zones are explained by the presence in the lower crust of buried slices of hydrated oceanic-type material, situated within the southward extension of the Reindeer-South Indian Lakes remnant back-arc basin and adjoining tectonic units. A new plate tectonic model is proposed for this region that involves the rifting and rupturing of the Archean continents and the opening and closing of one or more oceanic basins. This model is shown to be consistent with most of the geological, geophysical and geochronological data that pertains to the Proterozoic evolution of the exposed Shield and similar geophysical data and subsurface geochronological information from further south.     

The crustal evolution of South America from a zircon Hf‐isotope perspective

Hf‐isotope data of >1100 detrital zircon grains from the Palaeozoic, south‐central Andean Gondwana margin record the complete crustal evolution of South America, which was the predominant source. The oldest grains, with crustal residence ages of 3.8–4.0 Ga, are consistent with complete recycling of existing continental crust around 4 Ga. We confirm three major Archaean, Palaeoproterozoic (Transamazonian) and late Mesoproterozoic to early Neoproterozoic crust‐addition phases as well as six igneous phases during Proterozoic to Palaeozoic time involving mixing of juvenile and crustally reworked material. A late Mesoproterozoic to early Neoproterozoic, Grenville‐age igneous belt can be postulated along the palaeo‐margin of South America. This belt was the basement for later magmatic arcs and accreted allochthonous microcontinents as recorded by similar crustal residence ages. Crustal reworking likely dominated over juvenile addition during the Palaeozoic era, and Proterozoic and Archaean zircon was mainly crustally reworked from the eroding, thickened Ordovician Famatinian arc.     

Structure and evolution of an obliquely sheared continental margin: Rio Muni, West Africa

Oblique-shear margins are divergent continental terrains whose breakup and early drift evolution are characterized by significant obliquity in the plate divergence vector relative to the strike of the margin. We focus on the Rio Muni margin, equatorial West Africa, where the ca. 70-km-wide Ascension Fracture Zone (AFZ) exhibits oblique–slip faulting and synrift half-graben formation that accommodated oblique extension during the period leading up to and immediately following whole lithosphere failure and continental breakup (ca. 117 Ma). Oblique extension is recorded also by strike–slip and oblique–slip fault geometry within the AFZ, and buckling of Aptian synrift rocks in response to block rotation and local transpression. Rio Muni shares basic characteristics of both rifted and transform margins, the end members of a spectrum of continental margin kinematics. At transform margins, continental breakup and the onset of oceanic spreading (drifting) are separate episodes recorded by discrete breakup and drift unconformities. Oceanic opening will proceed immediately following breakup on a rifted margin, whereas transform and oblique-shear margins may experience several tens of millennia between breakup and drift. Noncoeval breakup and drift have important consequences for the fit of the equatorial South American and African margins because, in reconstructing the configuration of conjugate continental margins at the time of their breakup, it cannot be assumed that highly segmented margins like the South Atlantic will match each other at their ocean–continent boundaries (OCBs). Well known ‘misfits’ in reconstructions of South Atlantic continental margins may be accounted for by differential timing of breakup and drifting between oblique-shear margins and their adjacent rifted segments.     

Isotopic evidence for the magmatic and tectonic histories of the Carolina terrane: implications for stratigraphy and terrane affiliation

Establishing the age and crustal nature of exotic terranes and their underlying basements helps to determine their paleogeographic origin and tectonic histories. We present U–Pb ages of zircons and Sm–Nd whole rock isotopic data for volcanic and plutonic rocks of the Carolina terrane, one of several peri-Gondwanan terranes that were accreted to the margins of the circum-Atlantic continents during the Paleozoic. Volcanism in this subduction-related arc culminated in the eruption of the Morrow Mountain rhyolite, at ca. 540 Ma; thus, magmatism in the Carolina terrane ceased at the beginning of the Cambrian. The presence of inherited zircons and non-juvenile depleted mantle model ages of Carolina slate belt rocks favor a basement that is, at least in part, composed of evolved continental crust. Ages of inherited xenocrystic zircons cluster at ca. 1000, 2100 and 2500 Ma. These ages, in addition to volcanism at ca. 618–540 Ma, correlate best with well-known tectonic events in present-day northern South America. Specifically, the Orinoquian-Sunsas, the Trans-Amazonian and the Central Amazonian orogenic zones are likely candidates for potential basement correlatives to the Carolina terrane. Sm–Nd isotopic signatures vary significantly, but permit assimilation of Orinoquian age (1000 Ma) crust by magmas derived from the depleted mantle in a subduction (arc-related) setting. Our findings are also consistent with proposed correlations between the Carolina terrane and Avalonia which is likewise believed to have formed along the northern margin of present-day South America.     

Intraplate mountain building in response to continent–continent collision—the Ancestral Rocky Mountains (North America) and inferences drawn from the Tien Shan (Central Asia)

The intraplate Ancestral Rocky Mountains of western North America extend from British Columbia, Canada, to Chihuahua, Mexico, and formed during Early Carboniferous through Early Permian time in response to continent–continent collision of Laurentia with Gondwana—the conjoined masses of Africa and South America, including Yucatán and Florida. Uplifts and flanking basins also formed within the Laurentian Midcontinent. On the Gondwanan continent, well inboard from the marginal fold belts, a counterpart structural array developed during the same period. Intraplate deformation began when full collisional plate coupling had been achieved along the continental margin; the intervening ocean had been closed and subduction had ceased—that is, the distinction between upper versus lower plates became moot. Ancestral Rockies deformation was not accompanied by volcanism. Basement shear zones that formed during Mesoproterozoic rifting of Laurentia were reactivated and exerted significant control on the locations, orientations, and modes of displacement on late Paleozoic faults.Ancestral Rocky Mountain uplifts extend as far south as Chihuahua and west Texas (28° to 33°N, 102° to 109°W) and include the Florida-Moyotes, Placer de Guadalupe–Carrizalillo, Ojinaga–Tascotal and Hueco Mountain blocks, as well as the Diablo and Central Basin Platforms. All are cored with Laurentian Proterozoic crystalline basement rocks and host correlative Paleozoic stratigraphic successions. Pre-late Paleozoic deformational, thermal, and metamorphic histories are similar as well. Southern Ancestral Rocky Mountain structures terminate along a line that trends approximately N 40°E (present coordinates), a common orientation for Mesoproterozoic extensional structures throughout southern to central North America.Continuing Tien Shan intraplate deformation (Central Asia) has created an analogous array of uplifts and basins in response to the collision of India with Eurasia, beginning in late Miocene time when full coupling of the colliding plates had occurred. As in the Laurentia–Gondwana case, structures of similar magnitude and spacing to those in Eurasia have developed in the Indian plate. Within the present orogen two ancient suture zones have been reactivated—the early Paleozoic Terskey zone and the late Paleozoic Turkestan suture between the Siberian and East Gondwanan cratons. Inverted Proterozoic to early Paleozoic rift structures and passive-margin deposits are exposed north of the Terskey zone. In the Alay and Tarim complexes, Vendian to mid-Carboniferous passive-margin strata and the subjacent Proterozoic crystalline basement have been uplifted. Data on Tien Shan uplifts, basins, structural arrays, and deformation rates guide paleotectonic interpretations of ancient intraplate mountain belts. Similarly, exhumed deep crustal shear zones in the Ancestral Rockies offer insight into partitioning and reorientation of strain during contemporary intraplate deformation.     

1.8–1.5-Ga links between the North and South Australian Cratons and the Early–Middle Proterozoic configuration of Australia

The Archaean and Early–Middle Proterozoic (1.8–1.5 Ga) terranes of the North Australian Craton and the South Australian Craton are separated by 400 km of ca. 1.33–1.10-Ga orogenic belts and Phanerozoic sediments. However, there is a diverse range of geological phenomena that correlate between the component terranes of the two cratons and provide evidence for a shared tectonic evolution between approximately 1.8 and 1.5 Ga. In order to honour these correlations, we propose a reconstruction in which the South Australian Craton is rotated 52° counterclockwise about a pole located at 136°E and 25°S (present-day coordinates), relative to its current position. This reconstruction aligns the ca. 1.8–1.6-Ga orogenic belts preserved in the Arunta Inlier and the Gawler Craton and the ca. 1.6–1.5-Ga orogenic belts preserved in the Mount Isa Block and the Curnamona Province. Before 1.5 Ga, the South Australian Craton was not a separate entity but part of a greater proto-Australian continent which was characterised by accretion along a southward-migrating convergent margin (ca. 1.8–1.6 Ga) followed by convergence along the eastern margin (ca. 1.6–1.5 Ga). After 1.5 Ga, the South Australian Craton broke away from the North Australian Craton only to be reattached in its current position during the ca. 1.33–1.10 Ga-Albany–Fraser and Musgrave orogenies.     

Single zircon ages from high-grade rocks of the Jianping Complex, Liaoning Province, NE China

The high-grade rocks of the Jianping Complex in Liaoning Provi nce, NE China, belong to the late Archaean to earliest Proterozoic granulite belt of the North China craton. Single zircon ages obtained by the Pb–Pb evaporation method and SHRIMP analyses document an evolutionary history that began with deposition of a cratonic supracrustal sequence some 2522–2551 Ma ago, followed by intrusion of granitoid rocks beginning at 2522 Ma and reaching a peak at about 2500 Ma. This was followed by high-grade metamorphism, transforming the existing rocks into granulites, charnockites and enderbites some 2485–2490 Ma ago. The intrusion of post-tectonic granites at 2472 Ma is associated with widespread metamorphic retrogression and ends the tectono–metamorphic evolution of this terrain. A similar evolutionary sequence has also been recorded in the granulite belt of Eastern Hebei Province. We speculate that the Jianping Complex was part of an active continental margin in the late Archaean that became involved in continental collision and crustal thickening shortly after its formation. There is a remarkable similarity between the 2500 Ma North China granulite belt and the equally old granulite belt of Southern India, suggesting that the two crustal domains could have been part of the same active plate margin in latest Archaean times.     

Geological events during the early formation of a passive margin

The concept of plate tectonics implies that the normal sea floor spreading stage is preceded by a sequence of events associated with the break-up of continental crust. Thus, evidence of the early development of “non-failed” rifts is to be found at passive continental margins. Of special interest is the question of the extent of the continental crust and the structural and compositional changes associated with the change in crustal type. In addressing these topics, we have focused attention on the Norwegian margin between the Jan Mayen and Senja fracture zones (66°–70°N) in an attempt to understand its history of rifting and early sea floor spreading. p ]The southern part of this rifted margin is characterized by a wide shelf and the marginal Vøring Plateau interrupts a gentle slope at a level of about 1500 m. However, the margin becomes progressively narrower towards the north and a typical narrow shelf and steep slope emerge off the Lofo—tenVesterålen Islands (Fig. 1). In a reconstructed pre-opening configuration (Talwani and Eldholm, 1977) the narrowest part of the juxtaposed EastGreenland margin is found in the south and a wide shelf and slope corresponds to the Lofoten-Vesterålen margin.The most prominent structural element is a buried basement high underneath the Vøring Plateau. The high is bounded landward by the Vøring Plateau Escarpment, a major structural boundary which defines typical changes in the geophysical parameters. These are: (1) a sudden increase of depth to acoustic basement; (2) changes in the velocity-depth function; (3) a gravity gradient; and (4) a magnetic edge anomaly separating sea-floor spreading type anomalies from a quiet zone on the landward side (Talwani and Eldholm, 1972). These observations were interpreted in terms of a sharp ocea—ncontinent crustal transition along the escarpment with sea-floor spreading commencing between anomaly 24 and 25 time (56–58 m.y. B.P.). Alternatively, the concept of ancient oceanic crust landward of this escarpment and the possible existence of continental crust under the outer basement high have been argued and we refer to Eldholm et al. (1979) for a detailed discussion.     

U–Pb geochronology of the southern Brasília belt (SE-Brazil): sedimentary provenance, Neoproterozoic orogeny and assembly of West Gondwana

The Brasília belt borders the western margin of the São Francisco Craton and records the history of ocean opening and closing related to the formation of West Gondwana. This study reports new U–Pb data from the southern sector of the belt in order to provide temporal limits for the deposition and ages of provenance of sediments accumulated in passive margin successions around the south and southwestern margins of the São Francisco Craton, and date the orogenic events leading to the amalgamation of West Gondwana.Ages of detrital zircons (by ID–TIMS and LA-MC-ICPMS) were obtained from metasedimentary units of the passive margin of the São Francisco Craton from the main tectonic domains of the belt: the internal allochthons (Araxá Group in the Áraxá and Passos Nappes), the external allochthons (Canastra Group, Serra da Boa Esperança Metasedimentary Sequence and Andrelândia Group) and the autochthonous or Cratonic Domain (Andrelândia Group). The patterns of provenance ages for these units are uniform and are characterised as follows: Archean–Paleoproterozoic ages (3.4–3.3, 3.1–2.7, and 2.5–2.4 Ga); Paleoproterozoic ages attributed to the Transamazonian event (2.3–1.9 Ga, with a peak at ca. 2.15 Ga) and to the ca. 1.75 Ga Espinhaço rifting of the São Francisco Craton; ages between 1.6 and 1.2 Ga, with a peak at 1.3 Ga, revealing an unexpected variety of Mesoproterozoic sources, still undetected in the São Francisco Craton; and ages between 0.9 and 1.0 Ga related to the rifting event that led to the individualisation of the São Francisco paleo-continent and formation of its passive margins. An amphibolite intercalation in the Araxá Group yields a rutile age of ca. 0.9 Ga and documents the occurrence of mafic magmatism coeval with sedimentation in the marginal basin.Detrital zircons from the autochthonous and parautochthonous Andrelândia Group, deposited on the southern margin of the São Francisco Craton, yielded a provenance pattern similar to that of the allochthonous units. This result implies that 1.6–1.2 Ga source rocks must be present in the São Francisco Craton. They could be located either in the cratonic area, which is mostly covered by the Neoproterozoic epicontinental deposits of the Bambuí Group, or in the outer paleo-continental margin, buried under the allochthonous units of the Brasília belt.Crustal melting and generation of syntectonic crustal granites and migmatisation at ca. 630 Ma mark the orogenic event that started with westward subduction of the São Francisco plate and ended with continental collision against the Paraná block (and Goiás terrane). Continuing collision led to the exhumation and cooling of the Araxá and Passos metamorphic nappes, as indicated by monazite ages of ca. 605 Ma and mark the final stages of tectonometamorphic activity in the southern Brasília belt.Whilst continent–continent collision was proceeding on the western margin of the São Francisco Craton along the southern Brasília belt, eastward subduction in the East was generating the 634–599 Ma Rio Negro magmatic arc which collided with the eastern São Francisco margin at 595–560 Ma, much later than in the Brasília belt. Thus, the tectonic effects of the Ribeira belt reached the southernmost sector of the Brasília belt creating a zone of superposition. The thermal front of this event affected the proximal Andrelândia Group at ca. 588 Ma, as indicated by monazite age.The participation of the Amazonian craton in the assembly of western Gondwana occurred at 545–500 Ma in the Paraguay belt and ca. 500 Ma in the Araguaia belt. This, together with the results presented in this work lead to the conclusion that the collision between the Paraná block and Goiás terrane with the São Francisco Craton along the Brasília belt preceded the accretion of the Amazonian craton by 50–100 million years.     

Neoarchaean magmatism and metamorphism of the western granulites in the central domain of the Mozambique belt, Tanzania: U–Pb shrimp geochronology and PT estimates

U–Pb sensitive high resolution ion microprobe (SHRIMP) dating of zircons from charnockitic and garnet–biotite gneisses from the central portion of the Mozambique belt, central Tanzania indicate that the protolith granitoids were emplaced in a late Archaean, ca. 2.7 Ga, magmatic event. These ages are similar to other U–Pb and Pb–Pb ages obtained for other gneisses in this part of the belt. Zircon xenocrysts dated between 2.8 and 3.0 Ga indicate the presence of an older basement. Major and trace element geochemistry of these high-grade gneisses suggests that the granitoid protoliths may have formed in an active continental margin environment. Metamorphic zircon rims and multifaceted metamorphic zircons are dated at ca. 2.6 Ga indicating that these rocks were metamorphosed some 50–100 my after their emplacement. Pressure and temperature estimates on the charnockitic and garnet–biotite gneisses were obscured by post-peak metamorphic compositional homogenisation; however, these estimates combined with mineral textures suggest that these rocks underwent isobaric cooling to 800–850 °C at 12–14 kbar. It is considered likely that the granulite facies mineral assemblage developed during the ca. 2.6 Ga event, but it must be considered that it might instead represent a pervasive Neoproterozoic, Pan African, granulite facies overprint, similar to the ubiquitous eastern granulites further to the east.     

Pervasive horizontal fabric and rapid vertical extrusion: Lateral overturning and margin sub-parallel flow of deep crustal migmatites, northeastern Bohemian Massif

In the West Sudetes, northeastern Bohemia Massif, geochronometry provides evidence for repeated episodes of rapid cooling that contrasts sharply with an absence of structural evidence for significant tectonic exhumation by crustal extension. Instead, high-grade assemblages of the Orlica–Snieznik Complex have a regional sub-horizontal foliation and sub-horizontal lineations that trend parallel to narrow sub-vertical shear zones containing exhumed high-pressure assemblages. Mesoscopic petrofabrics combined with anisotropy of magnetic susceptibility (AMS) data from amphibolite facies to migmatitic meta-sedimentary and meta-igneous rocks reveal remarkably consistent average lineations that plunge shallowly to the SSW on both steep and sub-horizontal NNE-trending planar fabrics. The dominant SSW–NNE fabric orientation is parallel to the Bohemia–Brunia suture, which marks a major boundary along the eastern margin of the massif. The shape of the AMS ellipsoid is predominantly oblate, revealing flattened fabrics, with only local prolate ellipsoids. We envisage that the continental Brunian indentor operated as a rigid backstop and allowed the migmatized lower crustal orogenic root to be exhumed along the Bohemian margin shortly following terminal arc collision. Sub-vertical extrusion of the orogenic root was arrested in the mid-crust, where the lower ductile crust was laterally overturned at the base of rigid upper crustal blocks. Upon reaching the crustal high-strength lid the exhumed ductile mass of continental material laterally spread sub-parallel to the margin, underwent subsequent supra-Barrovian metamorphism, and quickly cooled. The application of AMS techniques to high-grade metamorphic rocks in concert with macroscopic structural observations is a powerful approach for resolving the deformation history of a terrane where visible rock fabrics can be tenuous.