岩石变形对粘土矿物结晶生长影响的初步研究——以江西金山金矿为例

作为流体作用过程中水—岩反应的产物，粘土矿物可以帮助人们认识水—岩反应的机制和流体活动的特征。本文以江西金山金矿为例，通过对热液蚀变粘土矿物伊利石和绿泥石结晶度、平均结晶大小和晶格应变的测定，讨论了岩石变形对伊利石和绿泥石结晶生长差异的影响。在岩石应变较弱、水／岩比较小的糜棱岩带，伊利石的平均结晶大小与结晶度成负相关，而在岩石应变较强、水／岩比较大的超糜棱岩带，绿泥石的平均结晶大小与结晶度成正相关。由应变较弱的蚀变糜棱岩带到应变较强的蚀变超糜棱岩带，伊利石的结晶度有变小的趋势，而绿泥石的结晶度则基本保持不变。认为在成矿流体作用过程中，粘土矿物的形成和特点不仅受水／岩比的影响，而且在岩石变形过程中，岩石的应变和恢复速率也影响粘土矿物的结晶大小；伊利石和绿泥石平均结晶大小与其结晶度之间的关系可以反映岩石变形的机制和行为。     

Comparison of diagenetic and low-grade metamorphic evolution of chlorite in associated metapelites and metabasites: an integrated TEM and XRD study

Chlorite is a common sheet silicate that occurs in various lithologies over a wide grade range involving diagenesis and low‐grade metamorphism. Thus, the reaction progress of chlorite offers a unique opportunity for direct correlation of zonal classification of metasedimentary rocks based on illite crystallinity with metabasite mineral facies. To provide such correlation, chlorite crystallinity indices, apparent mean crystallite sizes and lattice strains, crystallite size distributions and compositions of chlorite from coexisting metapelites and metabasites were determined by X‐ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), analytical electron microscopy (AEM) and electron microprobe (EMP) methods. Samples were from Palaeozoic and Mesozoic formations of the Bükkium (innermost Western Carpathians, Hungary) that underwent Alpine (Cretaceous) orogenic metamorphism. Metapelites range in grade from late diagenesis to epizone, whereas metabasites vary from prehnite–pumpellyite through pumpellyite–actinolite to greenschist facies. Despite significant differences in composition, mineral assemblages and textures, reaction progress, as measured in part by chlorite crystallinity, in metapelites paralleled that in metabasites. Chlorite crystallinity and mean crystallite size increase and the proportion of mixed layers in chlorite decreases, whereas the calculated lattice strain does not change significantly with increasing metamorphic grade. Similar trends, but (especially at higher grades) significant differences, were found in mean crystallite size values using various methods for XRD line profile analyses. The increase in crystallite size with increasing grade was demonstrated also by direct TEM measurements on ion‐milled whole‐rock samples, but with a larger scatter of data at higher grades. In spite of the different kinds of mixed layering in chlorite (Mg‐rich smectitic, mostly random, local corrensite‐like units in metabasites, and Fe‐rich berthierine and dioctahedral smectite in metapelites), XRD‐calculated and TEM‐measured parameters were found to be reliable tools for measuring reaction progress and metamorphic grade of the same degree in both lithotypes.     

Variations in Chemical Composition of Clay Minerals and Magnetic Susceptibility of Hydrothermally Altered Rocks in the Hishikari Epithermal Gold Deposit, SW Kyushu, Japan

Hydrothermal alteration, involving chiefly chlorite and illite, is extensively distributed within host rocks of the Pleistocene Hishikari Lower Andesites (HLA) and the Cretaceous Shimanto Supergroup (SSG) in the underground mining area of the Hishikari epithermal gold deposit, Kagoshima, Japan. Approximately 60% of the mineable auriferous quartz‐adularia veins in the Honko vein system occur in sedimentary rocks of the SSG, whereas all the veins of the Yamada vein system occur in volcanic rocks of the HLA. Variations in the abundance and chemical composition of hydrothermal minerals and magnetic susceptibility of the hydrothermally altered rocks of the HLA and SSG were analyzed. In volcanic rocks of the HLA, hydrothermal minerals such as quartz, chlorite, adularia, illite, and pyrite replaced primary minerals. The amount of hydrothermal minerals in the volcanic rocks including chlorite, adularia, illite, and pyrite as well as the altered and/or replaced pyroxenes and plagioclase phenocrysts increases toward the veins in the Honko vein system. The vein‐centered variation in mineral assemblage is pronounced within up to 25 m from the veins in the peripheral area of the Honko vein system, whereas it is not as apparent in the Yamada vein system. The hydrothermal minerals in sandstone of the SSG occur mainly as seams less than a few millimeters thick and are sporadically observed in halos along the veins and/or the seams. The alteration halos in sandstone of the SSG are restricted to within 1 m of the veins. In the peripheral area of the Honko vein system, chlorite in volcanic rocks is characterized by increasing in Al in its tetrahedral layer and the Fe/Fe + Mg ratio toward the veins, while illite in volcanic rocks has relatively low K and a restricted range of Fe/Fe + Mg ratios. Temperature estimates derived from chlorite geothermometry rise toward the veins within the volcanic rocks. The magnetic susceptibility of tuff breccia of the HLA varies from 21 to less than 0.01 × 10^?3 SI within a span of 40 m from the veins and has significant variation relative to that of andesite (27–0.06 × 10^?3 SI). The variation peripheral to the Honko vein system correlates with an increase in the abundance of hematite pseudomorphs after magnetite, the percentage of adularia and chlorite with high Fe/Fe + Mg ratios, and the degree of plagioclase alteration with decreasing distance to the veins. In contrast, sedimentary rocks of the SSG maintain a consistent magnetic susceptibility across the alteration zone, within a narrow range from 0.3 to 0.2 × 10^?3 SI. Magnetic susceptibility of volcanic rocks of the HLA, especially tuff breccia, could serve as an effective exploration tool for identifying altered volcanic rocks.     

Localization control for chlorite breccia deformation beneath Catalina detachment fault,Rincon Mountains,Tucson, Arizona

The structural location of an approximately 3-km stretch of the Catalina detachment fault zone appears to have been controlled by an ultramylonite shear zone within mylonites of the Catalina–Rincon metamorphic core complex. The Catalina detachment fault zone consists of the detachment fault surface, a 3–5 m interval of cataclasite and ultracataclasite, up to ∼50 m of chlorite breccia, and a discrete subdetachment fault. Beneath the subdetachment fault is a km-scale thickness of mylonites. Progressive ductile-to-brittle shear-zone evolution of the fault-rock stratigraphy started with mylonitization, was followed by overprinting of mylonites by chlorite brecciation, and culminated in the formation of the Catalina detachment fault and associated ultracataclasites. The detachment fault is cospatial with and subparallel to the zone of chlorite breccia. The subdetachment fault is subparallel to the interval of chlorite brecciation and to the detachment fault. The ‘plane’ of projection of the approximately 30-m thick ultramylonite shear zone within the mountain of mylonite, when followed downdip, coincides with the base of the ‘chlorite breccia’ brittle shear zone. Ultramylonite is preserved in places in the immediate lower plate of the subdetachment fault. The position and orientation of the subdetachment fault appears to have been controlled by an ultramylonite shear zone within the lower-plate mylonites. The rheological properties and orientation of this ultramylonite shear zone favored its reactivation as the brittle sole fault of the zone of chloritic brecciation.     

Chlorite crystallinity: an empirical approach and correlation with illite crystallinity, coal rank and mineral facies as exemplified by Palaeozoic and Mesozoic rocks of northeast Hungary

Abstract Fairly strong (r= 0.75–0.85) positive linear correlations were found between crystallinity indices (peak widths) measured on the first two basal reflections of chlorite and those of illite–muscovite in <2-μm fractions of a representative shale–slate–phyllite series from Palaeozoic and Mesozoic formations of northeast Hungary. The metamorphic grade ranges from late or deep diagenesis through anchizone to epizone conditions. Chlorite crystallinity values measured on air-dried and ethylene-glycol-solvated samples suggest that the effects of expandable interlayers are negligable, especially in the higher grade (～temperature) part of the series. However, the greater scattering of crystallinity values for the chlorite 001 reflection compared to those of the 002 reflection may be related to the effects of minor amounts of interlayered and/or discrete smectite and/or vermiculite. With increasing metamorphic grade and advancing equilibrium recrystallization, the chlorite compositions in different samples become more homogenous. No correlation exists between crystallinity and changes in chlorite composition as estimated from the intensity ratios of basal reflections. Hence an increase of domain size and a decrease of lattice distortion with increasing grade (～temperature) may be decisive factors affecting chlorite crystallinity. Chlorite crystallinity can be applied as a reliable regional, statistical technique complementary with, or instead of, the illite crystallinity method. The illite and chlorite crystallinity scales used here are related to Kübler's epi-, anchi- and diagenetic zones and correlated with coal rank, conodont colour alteration and mineral facies data. As the effects of the detrital white mica can be observed even in the <2-μm fractions of anchizonal metapelites, the anchizone boundaries determined solely on the base of ‘fixed’illite crystallinity values may vary with amounts of detrital and newly formed muscovite–illite. Hence a complex approach utilizing more than one method for determination of grade is preferred for petrogenetic purposes, even if relationships between crystallinity scales, coal rank and mineral facies also vary strongly in different tectonic settings and lithologies.     

Strain-related differences in the crystal growth of white mica and chlorite: a TEM and XRD study of the development of metapelitic microfabrics in the Southern Uplands thrust terrane, Scotland

Abstract TEM and XRD techniques were used to study crystal growth characteristics of the fabric-forming phyllosilicates which developed in response to low-grade metamorphism and tectonic imbrication in part of the Southern Uplands thrust terrane. Prograde regional metamorphism, ranging from late diagenesis through the anchizone to the epizone, was accompanied by the development of a slaty cleavage which is commonly bedding-parallel. TEM-measured mean thicknesses of white mica and chlorite crystallite populations increase with advancing grade and correlate with XRD-measured crystallinity indices. Analytical TEM data show that prograde changes in composition lead to a net loss of Si, Ca and minor Fe from the fabric-forming phyllosilicates. White micas are paragonite-poor phengites with a mean b lattice parameter of 9.037 Å, and indicate an intermediate pressure series of metamorphism with a field gradient of <25° C km^-1. Chlorite compositions evolved from diabantite (with intergrown corrensite) to ripidolite over an estimated temperature range of 150–320° C. Field gradient and temperature estimates suggest that crystal growth and fabric development occurred at burial depths ranging from 6 km to at least 13 km in the thrust terrane. During late diagenesis, crystal growth of white mica and chlorite was predominantly a consequence of polytypic and phase transitions, and resulted in similar size distributions which resemble typical Ostwald ripening curves. Under anchizonal and epizonal conditions, white mica grew more rapidly than chlorite because of its greater ability to store strain energy and recover from subgrain development; as a result crystal thickness distributions are not typical of Ostwald ripening. In contrast, chlorite crystals which grew under these conditions developed subgrain boundaries at high strain rates which were only partially recovered at low strain rates; these retained dislocations reduce the crystallite thicknesses detected by TEM and XRD, compared with those of white mica. These differences in strain-induced crystal growth indicate that white mica (illite) and chlorite crystallinity indices are likely to show significant differences where low-grade metamorphism is closely associated with tectonic fabric development.     

成岩带、近变质带与一维纳米级层状硅酸盐

运用X射线衍射分析技术，计算了成岩带、近变质带粘土矿物C^*方向的粒度。根据阿尔卑斯造山带前陆碎屑岩粘土矿物粒度与伊利石结晶指数的关系，推导出了伊利石、绿泥石、蒙脱石、伊蒙混层、高岭石和叶蜡石的c^*方向粒度变化趋势曲线。结果表明，大多数产于成岩带和近变质带的粘矿物其c6*方向粒工为几至几十纳米。成岩带和近为质带是一维天然纳为级土帮物的产地。     

Characteristics and distribution of clay minerals and their effects on reservoir quality: Huagang Formation in the Xihu Sag,East China Sea Basin

Abstract

The characteristics and distribution of clay minerals and their effects on reservoir quality in the Huagang sandstones in the Xihu Sag, East China Sea Basin were studied by using X-ray diffraction, casting thin-sections, scanning electron microscopy, electron microprobe analysis, fluid inclusion analysis, constant-rate mercury injection and nuclear magnetic resonance. Clay minerals consist of kaolinite, chlorite, illite and illite–smectite mixed layer (I/S); kaolinite forms from dissolved feldspars, chlorite occurs as clay coatings that are transformed from clay precursors owing to the flocculation of suspended detrital clays or the crystallisation of pore fluids, and illite forms from the illitisation of detrital smectite, authigenic kaolinite and K-feldspars. Clay distribution is controlled by sedimentary environments, burial history and lithologies. Typical reservoirs in the western sub-sag are thin and developed in braided river facies at relatively shallow burial depths with clays dominated by kaolinite. However, typical reservoirs in the central inversion tectonic zone are thicker and developed in a braided delta front facies at deeper burial depths with clays mainly consisting of chlorite, illite and I/S. High-quality reservoirs are characterised by coarse granularity, high quartz content and low clay content with widespread development of chlorite coatings that inhibit quartz cements at low temperatures. At higher temperatures, the high-quality reservoirs develop more pores providing growth space for quartz cements and result in the coexistence of chlorite coatings and quartz cements. The high-quality reservoirs are controlled by their lithological characteristics rather than chlorite coatings. Illite and I/S clays create severe damage to reservoirs by reducing the size and connectivity of pore-throats.     

糜棱岩型金矿金元素丰度与构造变形的关系

蚀变糜棱岩型金矿是一种成矿机制与放因素都与韧性剪切带及其糜棱岩密切相关的金矿床类型。研究表明：①深部韧性剪切变形是元素分异迁出区,未叠加蚀变矿化的糜棱岩变形越强,Ａｕ丰度就越低;②中浅层次变形域是Ａｕ元素聚集区,矿化发生于韧性剪切带糜棱岩抬升至较浅部位叠加了韧脆性变形阶段。构造变形超强的糜棱岩,越易叠加矿化,Ａｕ元素丰度越高;③强变形或者大构造并应力不仅是促使Ａｕ元素活化分异、形成含Ａｕ热液、使Ａ     

Coexisting ultramylonite and pseudotachylyte from the eastern segment of the Mahanadi shear zone, Eastern Ghats Mobile Belt

Pseudotachylytes occur associated with mylonite and ultramylonite in the Mahanadi shear zone (MSZ) in the Eastern Ghats Mobile Belt (EGMB). The MSZ is about 200 km long curvilinear high strain zone trending WNW-ESE in its eastern part that splays out in the west. In Kantilo-Ganian segment of MSZ in northern EGMB, an interbanded sequence of granulite facies lithoassemblage has undergone ductile shearing. Kinematic studies of mylonite and ultramylonite indicate MSZ to be a NE-dipping, extensional type ductile shear zone. Non-coaxial metamorphic growth of garnet and presence of truncated sillimanite-fish in ultramylonite suggest high temperature regime during shearing. Pseudotachylytes in MSZ occur as millimetre thick layers to decimetre thick zones containing fragments of mylonite, ultramylonite and lithic clasts. Pseudotachylyte generation veins are mostly sub-parallel to C-planes and the injection veins cross-cut at high angle to these. The presence of an isotropic glassy matrix, injection features, corroded grains and dendritic microlites can be evidences for the existence of a melt phase. The composition of pseudotachylyte matrix (by EPMA) indicates silica deficiency with higher normative hypersthene, plagioclase and lower quartz compared with average whole rock composition for host. Absence of overprinting of mylonitic fabric on pseudotachylytes indicates their formation by brittle failure without passing through a plastic deformation and thus a two stage development for mylonite-ultramylonite and pseudotachylyte generation is suggested.     

Diagenesis and Very Low‐grade Metamorphism of the Upper Permian Yangjiagou Formation in Eastern Changchun,China: Evidence from Clay Mineral Geothermobarometers

The metamorphic conditions of the Upper Permian Yangjiagou Formation in eastern Changchun, China, were evaluated based on the mineral assemblage, illite crystallinity, illite polytypism,the b dimension of illite, and the chemical composition of chlorite. The pelitic rocks in the Yangjiagou Formation are characterized by illite + kaolinite + chlorite ± mixed-layer chlorite/smectite and detrital quartz + plagioclase. Illite in the formation has a crystallinity of 0.38-0.55 and comprises mixed 2 M_1 and1 M_d polytypes, indicating a metamorphic temperature of 200℃. Based on the chemical composition of chlorite and the chlorite geothermometer, we estimated diagenetic to very low-grade metamorphic conditions with temperatures of 185℃～204℃. The b dimension of illite varies from 8.992 A to 9.005 A.We used a mathematical algorithm to extend Guidotti and Sassi's(1986) diagram relating illite b dimension with temperature and pressure, and used this diagram, together with illite crystallinity and chlorite chemical composition, to semi-quantitatively estimate the formation pressure at1.2 kbar. These reveal that the Yangjiagou Formation has experienced very low-grade metamorphism.     

TEM and XRD determination of crystallite size and lattice strain as a function of illite crystallinity in pelitic rocks

Average crystallite size and mean-square strain of illite in rock specimens and clay separates were measured independently in TEM images and by single-line Fourier (Voigt method) profile analysis of the c. 1 nm peak of XRD patterns for a prograde sequence of pelitic rocks (illite crystallinity indices=0.17–0.58°Δ2θ) from the Gaspé Peninsula, Quebec. The TEM-determined crystallite sizes in clay separates approximate those determined by Fourier profile analyses and those calculated from illite crystallinity indices by the Scherrer equation, with the exception of the diagenetic sample. The crystallite sizes and mean-square strains of illite in rock samples exhibit a trend similar to that determined by profile analyses, but the average crystallite sizes are up to five times larger than those measured for clay separates. TEM images show that all rock samples have a wide range of crystallite sizes, and the proportions of larger crystallites increase with metamorphic grade. The diagenetic illite is defect-rich, fine-grained (mean thickness by volume=c. 70 nm), 1M_d material. Anchizonal illite tends to occur as separate aggregates of small 1M_d and larger 2M₁ crystals (c. 200 nm), comprising arrays of subparallel coalescing packets. The epizone sample has thick (c. 400 nm), defect-free crystals of muscovite occurring in stacks of parallel layers, or subhedral crystals intergrown with large-angle boundaries. Cleaved crystals that are free of intracrystalline layer terminations are dominant in clay separates of all samples, having ranges of smaller sizes with volume-average thicknesses of c. 43, 43, and 81 nm (c. 14, 28, 67 nm by the Voigt method), respectively, for the three zones. The results suggest that illite crystallinity indices do not provide a direct measure of a single microstructural state of illite in rocks, although they yield consistent limits for average crystallite sizes for the anchizone (23 & 48 nm here). Therefore, they serve as a general parameter of the degree of recrystallization on a relative basis, in part because the contributions of all peak-broadening variables (mixed layering, size and strain) decrease regularly with prograde regional metamorphism of pelites. The microstructural changes caused by rock disaggregation are probably a function of those variables as well. The data collectively demonstrate a trend from metastable, defect-rich, small crystals towards a stable assemblage of larger, defect-free crystals, through dissolution of strained crystals and neocrystallization, consistent with the Ostwald step rule.     

粘土矿物地温计在沉积盆地热演化研究中的应用

在成岩过程中形成的粘土矿物真实地记录了地层形成的成岩温度及其盆地热演化的信息,可以作为沉积盆地的热史指标。本文主要介绍了伊利石/蒙皂石间层矿物（以下简称伊/蒙间层或I/S间层）、伊利石结晶度、绿泥石化学成分三种常用的粘土矿物地温计的发展历史、基本原理和影响因素;回顾了我国沉积盆地热演化研究中粘土矿物地温计的应用现状,并对未来的应用推广工作提出了若干参考建议。     

不同粘土矿物对赖氨酸的吸附行为对比研究

以皂石、高岭石、绿泥石和伊利石为原材料,分别与赖氨酸进行反应,研究赖氨酸在上述粘土矿物上的吸附行为, 并运用粉末X-射线衍射技术（XRD）、傅里叶变换红外吸收光谱术（FTIR）和热重（TG）等分析方法,表征反应前后粘土 矿物的变化。实验结果表明,不同粘土矿物对赖氨酸的吸附等温线均符合Freundlich等温方程,且不同粘土矿物对赖氨酸的 饱和吸附量大小顺序为：皂石>蒙脱石>绿泥石>高岭石>伊利石;XRD结果表明皂石对赖氨酸的吸附发生在矿物层间,而绿 泥石、高岭石和伊利石对赖氨酸的吸附主要在矿物表面进行;FTIR和TG结果表明赖氨酸主要取代粘土矿物层间吸附水,以 氢键的形式与Si-O-Si(IVAl)键合。实验结果将有助于进一步探明环境中粘土矿物对有机质的吸附机理。     

Metamorphism of Triassic Flysch Along Profile Zoigê-Lushan, Northwest Sichuan, China

We used illite and chlorite crystallinities, index minerals, mineral assemblages, polytype and domain size of white mica, electron microprobe analysis (EMPA), b0 geobarometer and chlorite geothermometer to quantify the diagenetic and metamorphic overprint on the Triassic flysch formations in the Songpan-Garzê orogen along profile Zoigê-Lushan, northwest Sichuan. Two anchizones, two epizones, one diagenetic zone and a transition belt in-between them are defined on the basis of the obtained data. lllite crystallinity correlates strongly with the best mean domain size of mica and moderately with chlorite crystallinity. 2M1 white mica polytype are observed within the epizone whilst 2M1 and 1M polytypes occur in the anchizone and diagenetic zone. Epizonal metamorphism reached maximum temperatures of 370℃±21℃ at low-to intermediate pressure conditions. Clay minerals underwent Ostwaid ripening during metamorphism. Rocks from both sides of the Longmenshan fault reveal contrasting degrees of metamorphic overprint: on the northwest side of the Longmenshan fault, epimetamorphlc conditions contrast with diagenetic rocks on the southeast side.     

Mineralogy and geochemistry of Nb-, Ta-, Sn-, U-, Th-, and Zr-bearing granitic rocks from Abu Rusheid shear zones,South Eastern Desert,Egypt

Granite-hosted,Nb-,Ta-,Sn-,U-,Th-,and Zr(Hf)-bearing mineralization from the Abu Rusheid shear zones occurs about 97 km southwest of the town of Marsa Alam,South Eastern Desert,Egypt.The SSE-trending brittle-ductile Abu Rusheid shear zones crosscut the peralkalic granitic gneisses and cataclastic to mylonitic rocks(mylonite,protomlyonite,and ultramylonite).The northern shear zone varies in width from 1 to 3 m with a strike length of >500 m,and the southern shear zone is 0.5 to 8 m wide and >1 km long.These shear zones locally host less altered lamprophyre and locally sheared granitic aplite-pegmatite dykes.The rare-metal minerals,identified from the peralkalic granitic gneisses and cataclastic to mylonitic rocks are associated with muscovite,chlorite,quartz,fluorite,pyrite,magnetite,and rare biotite that are restricted to the Abu Rusheid shear zones;these are columbite-tantalite and pyrochlore(var.betafite) in the northern shear zone and ferrocolumbite in the southern shear zone.Cassiterite occurs as inclusions in the columbite-tantalite minerals.U-and Th-minerals(uraninite,thorite,uranothorite,ishikawaite,and cheralite) and Hf-rich zircon coexist.Magmatic(?) zircon contains numerous inclusions of rutile,fluorite,U-Th and REE minerals,such as uranothorite,cheralite,monazite,and xenotime.Compositional variations in Ta/(Ta+Nb) and Mn/(Mn+Fe) in columbite range from 0.07-0.42 and 0.04-0.33,respectively,and Hf contents in zircon from 1.92-6.46 of the two mineralized shear zones reflect the extreme degree of magmatic fractionation.Four samples of peralkalic granitic gneisses and cataclastic to mylonitic rocks from the southern shear zone have very low TiO2(0.02 wt%-0.04 wt%),Sr [(15-20)×10-6],and Ba [(47-78)×10-6],with high Fe2O3T(0.94 wt%-1.99 wt%),CaO(0.14 wt%-1.16 wt%),alkalis(9.2 wt%-10.1 wt%),Rb [(369-805)×10-6],Zr [(1033-2261)×10-6],Nb [(371-913)×10-6],U [(51-108)×10-6],Th [(36-110)×10-6],Ta [(38-108)×10-6],Pb [(39-364)×10-6],Zn [(21-424)×10-6],Y [(8-304)×10-6],Hf [(29-157)×10-6],and ∑REE [(64-304)×10-6],especially HREE [(46-167)×10-6].Three samples from the northern shear zone also have very low TiO2(0.03 wt%),Sr [(11-16)×10-6],and Ba [(38-47)×10-6],with high Fe2O3T(1.97 wt%-2.91 wt%),CaO(0.49 wt%-1.01 wt%),alkalis(7.2 wt%-8.3 wt%),Rb [(932-978)×10-6],Zr [(1707-1953)×10-6],Nb [(853-981)×10-6],Ta [(100-112)×10-6],U [(120-752)×10-6],Th [(121-164)×10-6],Pb [(260-2198)×10-6],Zn [(483-1140)×10-6],Y [(8-304)×10-6],Hf [(67-106)×10-6],and ∑REE [(110-231)×10-6],especially HREE [(91-177)×10-6].The very high Rb/Sr(57.5-88.9),and low Zr/Hf(16.9-25.6),Nb/Ta(7.7-9.8),and Th/U(0.21-1.01) are consistent with very frac-tionated fluorine-bearing granitic rocks that were altered and sheared.The field evidence,textural relations,and compositions of the ore minerals suggest that the main mineralizing event was magmatic(629+/-5 Ma,CHIME monazite),with later hydrothermal alteration and local remobilization of the high-field-strength elements.     

金山金矿K—Ar年龄及其对赣东北构造演化的指示意义

金山金矿位于我国著名的德兴铜金矿集区内，是一个与韧性剪切带有关的金矿床。成矿流体作用过程的水－岩反应产物伊利石K－Ar年龄的测试结果表明，金山金矿地区存在着明显的晚古生代构造热事件，金山金矿的成矿作用与这次热事件活动有关，成矿年龄为269．9－317．9Ma；燕山期岩浆活动对金山金矿的影响不太明显。结合前人的研究成果，认为赣东北地区甚至整个华南地区在海西期不仅有明显的岩浆活动，而且海西期也是一次重要的金矿成矿期。     

河南省崤山地区金银矿床控矿构造特征与成矿模式

崤山位于华北陆块南缘,是河南省重要的有色金属成矿区。为进一步明确崤山地区控矿构造特征,分析探讨成矿就位机制,指导崤山地区中深部地质找矿工作,本文对崤山地区矿床地质特征、构造性质等要素进行了分析研究,将崤山地区控矿构造分为拆离断层控矿构造、韧性剪切带控矿构造和张扭性断裂控矿构造三类。①拆离断层沿太古界太华岩群的结晶基底与中元古界熊耳群盖层间发育,带内发育糜棱岩,崤山北部主要含矿石英脉多发育在紧靠拆离断层带下盘的太华岩群中,矿体就位于拆离剪切形成的拆离断层及其次级断裂带中;②韧性剪切带主要位于崤山中西部和北部,早期呈压扭特性,发育绿泥片岩质初糜棱岩、糜棱岩、花岗质超糜棱岩等,申家窑韧性剪切带晚期表现为张性特征,在其下盘发育有多组与其走向一致的羽列状次级断裂构造,矿体就位于韧性剪切带及其下盘羽状次级断裂带中;③张扭性断裂多发育于崤山中东部,断裂内充填有含金石英脉条带,围岩中多具绿泥石化、绿帘石化、钾化、黄铁矿化等,矿体就位于张扭性断裂带中。按照岩体、构造对成矿的作用关系,建立了崤山地区以深源岩浆为流体、以构造侵位为空间的"双控"成矿模式,指出韧性剪切带、拆离断层带中深部及其次级断裂带是寻找脉型金银矿床的有利地段,燕山期中酸性侵入岩体周缘有斑岩型铜钼矿成矿潜力。     

韧性剪切带糜棱岩类质量平衡分析——以豫西秦岭群蛇尾剪切带为例

蛇尾剪切带中糜棱岩的质量平衡分析表明:(1)以Al_2O_3守恒为限制条件,该剪切带损失了10％土的质量和体积,糜棱岩类有Na_2O,Zr,Sr的获得;SiO_2,TiO_2,FeO,Fe_2O_3,MgO,MnO,CaO,K_2O及Co,Ni,V,Cr,Cu,Y则损失了;(2)从初糜棱岩-糜棱岩,初糜棱岩-超糜棱岩和糜棱岩-超糜棱岩得出的质量等比线显示,糜棱岩类之间没有明显的质量和体积损失。糜棱岩组分的得失主要发生在初糜棱岩阶段,同初糜棱岩相比,糜棱岩、超糜棱岩有CaO的获得,FeO,MgO,TiO_2,Cr,Co,V,Y微弱的获得,Na_2O则有轻微的损失。     

安徽铜陵地区不同粒级土壤中元素含量 与矿物组成分布特征

土壤矿物和粒级组成及其与土壤元素关系的研究对土壤生态环境和肥力评价具有重要意义。对安徽铜陵地区土壤的研究发现,不同粒级段土壤中元素富集程度不同,不同元素的富集粒级也不尽相同,-200目细粒级中各种元素含量最低。研究表明,土壤不同粒级段的矿物组成不同,伊利石和针铁矿对Cu、Zn、Cd、Pb、As等元素具有较强的吸附作用。