钢管混凝土叠合柱边框内藏钢桁架核心筒抗震性能试验研究

为进一步改善混凝土核心简的抗震性能,本文提出了钢管混凝土叠合柱边框内藏钢桁架组合核心筒.进行了2个1/6缩尺的核心筒模型在低周反复荷载下的抗震性能试验研究,1个为钢管混凝土叠合柱边框毛组合核心筒,1个为钢管混凝土叠合柱边框内藏钢桁架组合核心筒.通过试验,对比分析了2个核心简的承载力、延性、刚度及其衰减、滞回特性、耗能能力及破坏特征,给出了钢管混凝土叠合柱边框内藏钢桁架组合核心筒的承载力计算模型,计算结果与实测值符合较好.研究表明,钢管混凝土叠合柱边框内藏钢桁架组合核心筒与钢管混凝土叠合柱边框组合核心筒相比,其抗震性能明显提高.     

叠合柱边框内藏钢板-钢撑核心筒抗震性能试验研究

提出了钢管混凝土叠合柱边框内藏钢板-钢撑混凝土组合核心筒,为了解该新型多重组合核心筒的抗震性能和破坏机理,文中进行了1个1/6缩尺的钢管混凝土叠合柱边框内藏钢板-钢撑带洞口混凝土组合核心筒的低周反复荷载试验研究.在试验研究基础上,分析了该多重组合核心筒的承载力、滞回特性、延性、刚度衰减和破坏形态.研究结果表明:钢管混凝土叠合柱边框内藏钢板-钢撑带洞口混凝土组合核心筒的抗震性能良好.     

国家体育场柱脚锚固性能试验研究

大跨结构柱脚锚固性能是抗震设计的关键之一。国家体育场柱脚为钢柱脚,该钢柱脚锚固于钢筋混凝土承台中,其受力复杂,以往国内外类似的试验很少。笔者共进行了4个钢筋混凝土承台-钢柱脚试件锚固性能的试验研究,本文介绍其中2个几何尺寸较大的钢筋混凝土承台-钢柱脚试件锚固性能的试验研究概况,1个试件为混凝土承台中配置抗拔钢筋的试件,1个为混凝土承台中未配置抗拔钢筋的试件。通过单向重复加载下的钢柱脚锚固性能试验,对试件的锚固承载力、延性、合理配筋型式等进行了研究。试验结果表明,混凝土承台中配置抗拔钢筋的试件与未配置抗拔钢筋的试件相比其锚固承载力和延性显著提高。在试验基础上,建立了柱脚锚固承载力计算的桁架模型,计算结果与实测结果符合较好。     

钢管混凝土叠合边框内藏钢板-钢桁架双肢剪力墙抗震研究

在大连国际会议中心核心筒墙体抗震设计中,采用了一种钢管混凝土叠合边框墙肢内藏钢板、连梁内藏钢桁架的组合双肢剪力墙。为研究其抗震性能,进行了1个1/7缩尺的这种新型组合双肢剪力墙模型的低周反复荷载试验,分析了其承载力、延性、刚度及其退化、滞回特性、耗能能力和破坏特征,重点研究了钢管混凝土叠合边框、墙肢内藏钢板、连梁内藏钢桁架之间的共同工作性能。研究表明:内藏钢板-钢桁架可显著提高钢管混凝土叠合边框双肢剪力墙的承载力和延性性能;钢管混凝土叠合边框可充分发挥其承载力高、不易开裂、延性好的优势。文中提出了该新型组合双肢剪力墙的承载力计算模型,计算结果与实测结果符合较好。     

圆钢管混凝土边框剪力墙抗震性能试验研究

圆钢管混凝土边框剪力墙是在普通混凝土剪力墙基础上研发的一种新型组合剪力墙。其将圆钢管混凝土柱和普通混凝土剪力墙进行了优势组合,形成多道抗震防线。为了解该组合剪力墙的抗震性能,进行了3个1/5缩尺试件的低周反复荷载试验,其中包括1个圆钢管混凝土柱框架结构、1个普通混凝土剪力墙和1个圆钢管混凝土边框剪力墙。在试验研究基础上,分析了圆钢管混凝土边框剪力墙的承载力、刚度及其退化过程、延性、滞回特性、耗能能力及破坏特征。研究表明:圆钢管混凝土边框剪力墙的抗震性能比普通混凝土剪力墙显著提高,且其承载力、抗震耗能能力均高于圆钢管混凝土柱框架和普通混凝土剪力墙承载力、抗震耗能能力之和,可用于高层和超高层建筑的抗震设计。     

圆钢管混凝土边框内藏钢桁架剪力墙抗震性能试验研究

圆钢管混凝土边框内藏桁架剪力墙是一种新型组合剪力墙.为了解这种剪力墙的抗震性能,进行了 3个1/5缩尺试件的低周反复荷载试验.3个试件中,1个为圆钢管混凝土柱框架结构,1个为圆钢管混凝土边框-钢桁架结构,1个为圆钢管混凝土边框内藏钢桁架剪力墙.基于试验,对比分析了各试件的承载力、刚度及其退化过程、滞回特性、耗能能力及破...     

内藏钢桁架深连梁联肢剪力墙抗震性能试验研究

进行了1个1/7缩尺、剪跨比为2.0的带矩形钢管混凝土叠合柱边框内藏钢桁架深连梁联肢剪力墙模型的低周反复荷载试验。分析了该剪力墙的承载力、延性、滞回特性、耗能能力等抗震性能,研究了内藏钢桁架对该联肢剪力墙抗震性能的影响。试验研究表明:内藏钢桁架深连梁联肢剪力墙具有较好的延性;内藏钢桁架混凝土连梁对提高剪力墙的承载力及延性作用显著;带钢管混凝土叠合柱的翼墙可充分发挥钢管混凝土叠合柱抗压能力强、承载力高、不易开裂、延性好的优势;该新型组合剪力墙实现了"强墙肢、弱连梁"的延性屈服机制。     

不同构造措施的钢管混凝土边框钢板剪力墙抗震性能试验研究

钢管混凝土边框钢板剪力墙是一种新型抗震剪力墙,为了比较不同构造措施对该新型剪力墙抗震性能的影响,进行了3个剪跨比为1.5的钢管混凝土边框钢板剪力墙低周反复荷载试验。其中,试验模型1为墙体钢板与边框柱钢管焊接,试验模型2为墙体钢板与边框柱钢管螺栓连接,试验模型3为墙体钢板开孔并与边框柱钢管焊接。通过试验研究,比较了各剪力墙的破坏特征、滞回特性、承载力、刚度、延性以及耗能能力。结果表明：在墙体钢板与边框柱钢管的连接方式中,采用焊接或栓接对剪力墙的整体性能影响不大;与普通钢管混凝土边框钢板剪力墙相比,钢板开孔钢管混凝土边框钢板剪力墙在开孔率不大的情况下,其承载力、延性、刚度和耗能能力没有明显变化。     

轻钢芯柱-保温夹层组合砌体墙抗震性能试验研究

提出了一种轻型钢管混凝土芯柱-保温夹层砌体组合墙,为研究这种墙体的抗震性能,进行了3个不同构造组合砌体墙与1种带限位装置的玻璃珠-石墨基础滑移隔震技术结合的低周反复荷载试验,试件1为轻型钢管混凝土芯柱-再生砖组合墙试件,试件2为轻型钢管混凝土芯柱-粉煤灰砌块夹层-再生砖组合墙试件,试件3为轻型钢管混凝土芯柱-粉煤灰砌块夹层-端部再生砖约束型土坯组合墙试件,各试件墙体两端均内置了竖向构造钢筋。对比分析了各试件的破坏特征、承载力、延性和滞回性能,给出了轻钢芯柱-保温夹层砖砌体墙的承载力计算公式,计算结果与试验符合较好。研究表明:轻型钢管混凝土芯柱-保温夹层砌体墙具有良好的抗震性能,可用于农村低层房屋砌体结构抗震设计。     

钢管混凝土-钢板深梁结构抗震试验与承载力计算

提出了钢管混凝土-钢板深梁结构,进行了4个钢管混凝土-钢板深梁结构模型试件的低周反复荷载试验,4个试件均由等截面钢管混凝土柱和等尺寸钢板深梁构成,各试件高宽比相同。4个试件的区别在于设置的钢板深梁道数不同,以重点研究钢板深梁对结构抗震性能的影响。分析了各试件的承载力、刚度及退化过程、延性、滞回特性、耗能和损伤与破坏过程等。基于试验,提出了承载力计算模型,计算结果与实测结果符合较好。研究表明:钢管混凝土-钢板深梁结构,具有良好的抗震性能;钢板深梁与钢管混凝土设计参数应合理匹配,以实现强钢管混凝土柱和弱钢板深梁的延性屈服机制;钢管混凝土-钢板深梁结构可用于结构抗震设计。     

薄壁方钢管混凝土柱劲化设计及轴压性能探讨

对于薄壁方形钢管混凝土柱,有效且经济地提高柱的承载力、刚度和延性,增强其抵抗局部屈曲的能力是目前的一项重要研究课题。据此,进行8个薄壁方形钢管混凝土轴压试件的研究,比较普通薄壁钢管混凝土柱与劲化薄壁钢管混凝土柱的轴压极限承载力、延性性能、局部屈曲模态及相应耗钢量,研究表明:劲化设置在增加较少用钢量的情况下,使钢管壁对核心混凝土的约束作用相对于普通钢管混凝土柱和单纯加设约束拉杆的钢管混凝土柱更趋均匀,提高了整体约束效应,混凝土强度得以提高,本构关系明显改善。从而增加了钢管混凝土柱的轴压承载力和延性,改变了钢管的局部屈曲变形状态,其实用效益与经济效益极其可观,具有良好推广价值。     

Modeling level selection for seismic analysis of concrete‐filled steel tube/moment‐resisting frames by using fragility curves

The seismic behavior of plane moment‐resisting frames (MRFs) consisting of I steel beams and concrete‐filled steel tube (CFT) columns is investigated in this study. More specifically, the effect of modeling details of each individual component of CFT‐MRFs, such as the composite CFT columns, the beam‐column connections, the panel zones, and the steel I beams on their seismic behavior, is studied through comparisons against available experimental results. Then, fragility curves are constructed for three typical CFT‐MRFs, designed according to European codes, for various levels of modeling sophistication through nonlinear time‐history analyses. On the basis of these fragility curves, one can select the appropriate modeling level of sophistication that can lead to the desired seismic behavior for a given seismic intensity. Copyright © 2014 John Wiley & Sons, Ltd.     

Cyclic tests of post‐tensioned precast CFT segmental bridge columns with unbonded strands

Two ungrouted post‐tensioned, precast concrete‐filled tube (CFT) segmental bridge columns were tested under lateral cyclic loading to evaluate the seismic performance of the column details. The specimens included a load stub, four equal‐height circular CFT segments, and a footing. Strands were placed through the column and post‐tensioned to provide a precompression of the column against the footing. One specimen also contained energy‐dissipating devices at the base to increase the hysteretic energy. The test results showed that (1) both specimens could develop the maximum flexural strength at the design drift and achieve 6% drift with small strength degradation and residual displacement, (2) the proposed energy‐dissipating device could increase energy dissipation in the hysteresis loops, and (3) the CFT segmental columns rotated not only about the base but also about the interface above the bottom segment. This study proposed and verified a method to estimate the experimental flexural displacement using two plastic hinges in the segmental column. Copyright © 2005 John Wiley & Sons, Ltd.     

Hysteretic behavior and strength capacity of shallowly embedded steel column bases with SFRCC slab

A series of shallowly embedded steel column bases consisting of an exposed column base and a floor slab is tested under horizontal cyclic loading to very large deformation. The effects of floor slabs on strength and ductility are examined using concrete and Steel fiber‐reinforced cementitous composites (SFRCC) for the floor slab. The elastic stiffness, maximum strength, and dissipated energy of the column bases when they include SFRCC increase by 40, 70, and 70% over those of corresponding column bases with concrete floor slab. Better bonding behavior is notable for SFRCC, and the maximum strength and dissipated energy further increase by 15–30% and 70–90%, respectively, owing to the careful arrangement of reinforcing bars. Numerical models are developed to enhance the understanding the behavior of shallowly embedded column bases. Procedures for estimating the elastic stiffness and maximum strength of shallowly embedded column bases with conventional concrete are calibrated for their applicability to those with SFRCC slab. Copyright © 2011 John Wiley & Sons, Ltd.     

Tests and model calibration of high‐strength steel tubular beam‐to‐column and column‐base composite joints for moment‐resisting structures

Performance‐based engineering (PBE) methodologies allow for the design of more reliable earthquake‐resistant structures. Nonetheless, to implement PBE techniques, accurate finite element models of critical components are needed. With these objectives in mind, initially, we describe an experimental study on the seismic behaviour of both beam‐to‐column (BTC) and column‐base (CB) joints made of high‐strength steel S590 circular columns filled with concrete. These joints belonged to moment‐resisting frames (MRFs) that constituted the lateral‐force‐resisting system of an office building. BTC joints were conceived as rigid and of partial strength, whereas CB joints were designed as rigid and of full strength. Tests on a BTC joint composed of an S275 steel composite beam and high‐strength steel concrete‐filled tubes were carried out. Moreover, two seismic CB joints were tested with stiffeners welded to the base plate and anchor bolts embedded in the concrete foundation as well as where part of a column was embedded in the foundation with no stiffeners. A test programme was carried out with the aim of characterising these joints under monotonic, cyclic and random loads. Experimental results are presented by means of both force–interstory drift ratio and moment–rotation relationships. The outcomes demonstrated the adequacy of these joints to be used for MRFs of medium ductility class located in zones of moderate seismic hazard. Then, a numerical calibration of the whole joint subassemblies was successfully accomplished. Finally, non‐linear time‐history analyses performed on 2D MRFs provided useful information on the seismic behaviour of relevant MRFs. Copyright © 2015 John Wiley & Sons, Ltd.     

Seismic behavior of concrete filled steel tubular arch structures

Shaking table tests of a 1:10 scale arch model performed to investigate the seismic behavior and resistance ofconcrete filled steel tubular (CFT) arch structures are described in this paper. The El-Centro record and Shanghai artificial wave were adopted as the input excitation. The entire test process can be divided into three stages depending on the lateral brace configurations, i.e., fully (five) braced, two braces removed, and all braces removed. A total of 46 tests, starting from the elastic state to failure condition, have been conducted. The natural vibration frequencies, responses of acceleration, displacement and strain were measured. From the test results, it is demonstrated that the CFT arch structures are capable of resisting severe ground motions and that CFT arches offer a credible alternative to reinforced concrete arches, especially in regions of high seismic intensity.     

Research on seismic performance of shear walls with concrete filled steel tube columns and concealed steel trusses

In order to further improve the seismic performance of RC shear walls, a new composite shear wall with concrete filled steel tube (CFT) columns and concealed steel trusses is proposed. This new shear wall is a double composite shear wall; the first composite being the use of three different force systems, CFT, steel truss and shear wall, and the second the use of two different materials, steel and concrete. Three 1/5 scaled experimental specimens: a traditional RC shear wall, a shear wall with CFT columns, and a shear wall with CFT columns and concealed steel trusses, were tested under cyclic loading and the seismic performance indices of the shear walls were comparatively analyzed. Based on the data from these experiments, a thorough elastic-plastic finite element analysis and parametric analysis of the new shear walls were carried out using ABAQUS software. The finite element results of deformation, stress distribution, and the evolution of cracks in each phase were compared with the experimental results and showed good agreement. A mechanical model was also established for calculating the load-carrying capacity of the new composite shear walls. The results show that this new type of shear wall has improved seismic performance over the other two types of shear walls tested.     

基于位移的方钢管混凝土柱抗震设计方法研究

对基于位移的方钢管混凝土柱抗震设计方法进行了研究：介绍了基于位移抗震设计方法的概念、原理和设计的一般过程；探讨了方钢管混凝土柱的等效刚度、等效阻尼等设计中的关键问题，并确定了参数的具体取值；最后对方钢管混凝土柱进行了具体的基于位移的抗震设计，并研究了主要参数的影响。结果表明：在通常范围内，第二阶段刚度系数对滞回阻尼比影响不大；随着轴压比的增加，钢管壁厚度增加，柱延性系数增加；随着截面尺寸增加，钢管壁厚度减小，屈服弯矩也减小。     

内约束方钢管混凝土柱抗震性能研究

由于方钢管对混凝土约束作用较弱,地震作用下方钢管混凝土柱底部钢管易出现屈曲,因此本文提出一种新型内约束方钢管混凝土柱。基于ABAQUS有限元软件,本文采用合理的材料本构模型建立内约束方钢管混凝土柱三维实体精细有限元模型,该模型能准确反应钢管、混凝土以及拉筋之间的相互作用,又能反应拟静力作用下混凝土的塑性损伤和钢材的循环硬化规律。有限元结果与试验结果吻合良好。首先,在此基础上笔选出最佳内约束形式,对拉箍筋方钢管混凝土柱的抗震性能明显优于圆环箍筋;其次,提出在不同轴压比下内约束方钢管混凝土柱的焊接拉筋最佳布置长度和合理体积配箍率;再次,探讨不同参数对内约束方钢管混凝土柱滞回性能的影响,结果表明:提高截面含钢率和长细比能有效改善组合柱的极限承载力,而轴压比在一定范围内有利于能提高柱的承载力;最后,讨论了约束措施对内约束方钢管混凝土柱耗能性能的影响。     

Cyclic tests on a hybrid coupled wall utilizing a rocking mechanism

A new type of hybrid coupled wall system, consisting of rolled steel coupling beams, reinforced concrete (RC) wall piers, and concrete‐filled tube (CFT) short columns, is introduced. In this new system, the bases of the wall piers are connected to the base beams only through CFT short columns, unlike conventional coupled walls. Yield occurs in the coupling beams and the short columns; hence, in the RC wall piers, only minimum cracking appears. A total of four subassembly specimens, designed to fail in various collapse mechanisms, were cyclically loaded under constant axial force. A benchmark specimen showed ductile behavior with large energy dissipation until fracture occurred in the coupling beam. In the specimen designed to fail in shear in its CFT, substantial axial shortening was observed, but the overall behavior was ductile. Behavior of specimens with small amounts of section steel in the wall panel fringe, or with thin wall panels, also showed ductile behavior, but the strength and energy dissipation were significantly smaller than other two specimens. An analytical model was proposed for a frame analysis program using fiber elements to simulate elastic–plastic behavior of the system. Design methods to prevent shear failure of CFT and RC panels are suggested using the analytical and test results. Copyright © 2008 John Wiley & Sons, Ltd.