Timing and rate of isothermal decompression in Pan-African granulites from Rundvågshetta, East Antarctica

Geochronological data, combined with field and petrological evidence, constrain the timing and rate of near‐isothermal decompression at granulite facies temperatures in rocks from the Lützow‐Holm Complex of East Antarctica. Granulite facies gneisses from Rundvågshetta in Lützow‐Holm Bay experienced a peak metamorphic temperature of over 900 °C at c. 11 kbar, as evidenced by primary orthopyroxene–sillimanite‐bearing assemblages, and secondary cordierite–sapphirine‐bearing assemblages in metapelites. Peak metamorphic assemblages show strong preferred mineral orientation, interpreted to have developed synchronously with pervasive ductile deformation. Zircon from a syndeformational leucosome has a U–Pb age of 517±9 Ma, which is interpreted as a melt crystallization age. This age provides the best estimate of the time of peak metamorphic conditions. The post‐peak metamorphic history is characterized by near‐isothermal decompression, recorded by mineral textures in a variety of rock compositions. Field and textural relations indicate that decompression post‐dated pervasive ductile deformation. K/Ar and ⁴⁰Ar/³⁹Ar ages from hornblende and biotite represent closure ages during cooling subsequent to decompression, and indicate cooling to temperatures between c. 350 and 300 °C by c. 500 Ma, thus placing a lower time limit on the duration of the high‐temperature isothermal decompression episode. The combination of the zircon age from a syndeformational melt with K/Ar and ⁴⁰Ar/³⁹Ar closure ages indicates that near‐isothermal decompression from c. 11 to c. 4 kbar at granulite facies temperatures, followed by cooling to c. 300 °C, took place within a time interval of 20±10 Myr. Simple one‐dimensional models for exhumation‐controlled cooling indicate that these data require exhumation rates of the order of c. 3 km Myr^?1 for several million years, then cessation of exhumation followed by relatively isobaric cooling during thermal re‐equilibration.     

Slow cooling versus episodic fluid injections: Deciphering the Caledonian orogeny in Vestvågøy,Lofoten islands,Norway

The determination of the thermal (temperature–time) histories of high‐P metamorphic terranes has been commonly based on the concepts of slow cooling and closure temperatures. In this paper, we find that this approach cannot reconcile a geochronological data set obtained from the amphibolite‐facies allochthonous Leknes Group of the Lofoten islands, Norway, which reveals an extremely complex thermal history. Using detailed results from several different geochronometers such as ⁴⁰Ar/³⁹Ar, Rb–Sr and U–Pb, we show that a model invoking multiple, short‐lived thermal pulses related to hot‐fluid infiltration channelized by shear zones can reconcile this complicated data set. This model suggests that hot fluids infiltrated throughout basement shear zones and affected the overlying cold allochthon, partially resetting U/Pb rutile and titanite ages, crystallizing new zircon and produced identical ⁴⁰Ar/³⁹Ar and Rb/Sr ages in muscovite, biotite and amphibole in various rocks throughout the region. This paper shows the enormous potential of coupling laser Ar‐spot data with thermal modelling to identify and constrain the duration of short‐lived events. An optimal P–T–t history has been derived by modelling the age data from a previously dated large muscovite crystal (Hames & Andresen, 1996, Geology, 24 :1005) and using Zr‐in‐rutile thermometry which is consistent with all geochronological data and geological constraints from the basement zones and allochthon cover. This tectonothermal model history suggests that there have been three episodic hot‐fluid and ⁴⁰Ar‐free infiltration events, resulting in the total resetting of Ar ages during the Scandian (425 Ma) for 1 Ma at 650°C and two reheating events at 415 Ma for 400 ka at 650°C and at 365 Ma for 50 ka at 600°C, which are modelled as thermal spikes above an ambient temperature of 300°C. Independent confirmation of these parameters was provided by Pb‐diffusion modelling in rutile and titanite. The model suggests that the amphibolite facies rocks of the Leknes Group probably remained cold before being exhumed for at least 60 Ma (425–365 Ma) and successfully explains the presence of different minerals that crystallized or were totally/partially reset in the allochthon and in the basement. The migration of hot fluids for short periods of times within conduits extending through the basement and allochthon rock units is likely associated with episodic seismic activity during the Caledonian orogeny.     

Late Palaeozoic mineralization and tectonic evolution of the West Junggar metallogenic belt,Central Asia: constraints from Re–Os and 40Ar/39Ar geochronology

ABSTRACT

The West Junggar Metallogenic Belt (WJMB) is located between the Tianshan fault system and the Ertix fault system in the western part of the Central Asian Metallogenic Domain (CAMD). The belt features widespread late Palaeozoic granitic plutons, strike-slip faults, and porphyry copper and orogenic gold deposits. We collected nine molybdenite samples from the Baogutu III–IV Cu–Mo deposit and the Suyunhe Mo–W deposit, and 12 granitoid samples from the Jiaman, Kangde, Kulumusu, Bieluagaxi, Hatu, Akbastau, Miaoergou, Baogutu, Karamay, and Hongshan plutons in the WJMB. Molybdenite Re–Os dating gives metallogenesis ages of 312.7 and 299.7 Ma for the Baogutu III–IV and Suyunhe deposits, respectively. ⁴⁰Ar/³⁹Ar thermochronology yields biotite ages ranging from 326 to 302 Ma and K-feldspar ages from 297 to 264 Ma, indicating a regional medium-temperature cooling history in the WJMB during the late Carboniferous to middle Permian. By integrating these data with previous zircon U–Pb, amphibole ⁴⁰Ar/³⁹Ar, and zircon and apatite fission-track ages, we reconstruct the whole thermal history of the WJMB, which includes late Palaeozoic intrusive magmatism, porphyry Cu and W–Mo mineralization, and late Mesozoic tectonic uplift and exhumation of the WJMB. The regional ⁴⁰Ar/³⁹Ar cooling ages are consistent with the timing of regional sinistral strike-slip faulting, thereby indicating the tectonic significance of the cooling ages. We suggest that the biotite ⁴⁰Ar/³⁹Ar ages represent the static cooling of the granitic plutons after emplacement, since the ages are consistent with the U–Pb ages of the plutons. Thereafter, the oldest K-feldspar ⁴⁰Ar/³⁹Ar age may record the initiation of sinistral strike-slip movement on the Darabut, Mayile, and Baerluke faults. The regional faulting resulted in significant uplift of the WJMB during the early and middle Permian.     

Jurassic‐to‐present thermal history of the central High Atlas (Morocco) assessed by low‐temperature thermochronology

Apatite fission track (AFT) and (U–Th)/He data from the High Atlas have been obtained for the first time to constrain the tectono‐thermal evolution of the central part of the chain. Results from Palaeozoic basement massifs indicate long residence at low temperatures, consistently with their original location out of the deepest Mesozoic rift troughs and indicating minor exhumation. The best rocks for extracting the Alpine history of the Atlas Mountains are Jurassic intrusives, which yield AFT ages centred on c. 80 Ma; thermal models based on AFT data and constrained by (U–Th)/He suggest that these ages are included in a slow cooling trend from intrusion age to c. 50 Ma ago that we attribute to post‐rift thermal relaxation. This is followed by a stability period of c. 30 Ma and then by a final exhumational cooling until present exposure. Eocene intrusives yield AFT ages similar to those of Rb–Sr and K–Ar suggesting rapid emplacement in the uppermost crust.     

Geochronological constraints on the timing of granitoid magmatism, metamorphism and post-metamorphic cooling in the Hercynian crustal cross-section of Calabria

Exposed cross‐sections of the continental crust are a unique geological situation for crustal evolution studies, providing the possibility of deciphering the time relationships between magmatic and metamorphic events at all levels of the crust. In the cross‐section of southern and northern Calabria, U–Pb, Rb–Sr and K–Ar mineral ages of granulite facies metapelitic migmatites, peraluminous granites and amphibolite facies upper crustal gneisses provide constraints on the late‐Hercynian peak metamorphism and granitoid magmatism as well as on the post‐metamorphic cooling. Monazite from upper crustal amphibolite facies paragneisses from southern Calabria yields similar U–Pb ages (295–293±4 Ma) to those of granulite facies metamorphism in the lower crust and of intrusions of calcalkaline and metaluminous granitoids in the middle crust (300±10 Ma). Monazite and xenotime from peraluminous granites in the middle to upper crust of the same crustal section provide slightly older intrusion ages of 303–302±0.6 Ma. Zircon from a mafic to intermediate sill in the lower crust yields a lower concordia intercept age of 290±2 Ma, which may be interpreted as the minimum age for metamorphism or intrusion. U–Pb monazite ages from granulite facies migmatites and peraluminous granites of the lower and middle crust from northern Calabria (Sila) also point to a near‐synchronism of peak metamorphism and intrusion at 304–300±0.4 Ma. At the end of the granulite facies metamorphism, the lower crustal rocks were uplifted into mid‐crustal levels (10–15 km) followed by nearly isobaric slow cooling (c. 3 °C Ma^?1) as indicated by muscovite and biotite K–Ar and Rb–Sr data between 210±4 and 123±1 Ma. The thermal history is therefore similar to that of the lower crust of southern Calabria. In combination with previous petrological studies addressing metamorphic textures and P–T conditions of rocks from all crustal levels, the new geochronological results are used to suggest that the thermal evolution and heat distribution in the Calabrian crust were mainly controlled by advective heat input through magmatic intrusions into all crustal levels during the late‐Hercynian orogeny.     

One-dimensional thermal modelling of Acadian metamorphism in southern Vermont, USA

One‐dimensional thermal (1DT) modelling of an Acadian (Devonian) tectonothermal regime in southern Vermont, USA, used measured metamorphic pressures and temperatures and estimated metamorphic cooling ages based on published thermobarometric and geochronological studies to constrain thermal and tectonic input parameters. The area modelled lies within the Vermont Sequence of the Acadian orogen and includes: (i) a western domain containing garnet‐grade pre‐Silurian metasedimentary and metavolcanic rocks from the eastern flank of an Acadian composite dome structure (Rayponda–Sadawga Dome); and (ii) an eastern domain containing similar, but staurolite‐ or kyanite‐grade, rocks from the western flank of a second dome structure (Athens Dome), approximately 10 km farther east. Using reasonable input parameters based on regional geological, petrological and geochronological constraints, the thermal modelling produced plausible P–T paths, and temperature–time (T –t) and pressure–time (P–t) curves. Information extracted from P–T –t modelling includes values of maximum temperature and pressure on the P–T paths, pressure at maximum temperature, predicted Ar closure ages for hornblende, muscovite and K‐feldspar, and integrated exhumation and cooling rates for segments of the cooling history. The results from thermal modelling are consistent with independently obtained pressure, temperature and Ar cooling age data on regional metamorphism in southern Vermont. Modelling results provide some important bounding limits on the physical conditions during regional metamorphism, and indicate that the pressure contemporaneous with the attainment of peak temperature was probably as much as 2.5 kbar lower than the actual maximum pressure experienced by rocks along various particle paths. In addition, differences in peak metamorphic grade (garnet‐grade versus staurolite‐grade or kyanite‐grade) and peak temperature for rocks initially loaded to similar crustal depths, differences in calculated exhumation rates, and differences in ⁴⁰Ar/³⁹Ar closure ages are likely to have been consequences of variations in the duration of isobaric heating (or ‘crustal residence periods’) and tectonic unroofing rates. Modelling results are consistent with a regional structural model that suggests west to east younging of specific Acadian deformational events, and therefore diachroneity of attainment of peak metamorphic conditions and subsequent ⁴⁰Ar/³⁹Ar closure during cooling. Modelling is consistent with the proposition that regional variations in timing and peak conditions of metamorphism are the result of the variable depths to which rocks were loaded by an eastward‐thickening thrust‐nappe pile rooted to the east (New Hampshire Sequence), as well as by diachronous structural processes within the lower plate rocks of the Vermont Sequence.     

40Ar‐39Ar and K‐Ar age constraints on the Early Proterozoic Tennant Creek Block,northern Australia,and the age of its gold deposits∗

⁴⁰Ar‐³⁹Ar age spectra on minerals from granitic, metamorphic and hydrothermal rocks confirm that the Early Proterozoic Tennant Creek Block was affected by two thermal events during its evolution. Although extensive alteration of biotite and feldspar within the granites precludes the direct determination of their cooling history, ⁴⁰Ar‐³⁹Ar analyses for hydrothermal muscovite from several nearby gold‐copper deposits indicate that regional cooling to below ～ 300°C was not prolonged. Flat, uniform muscovite age spectra were obtained from gold deposits east of the Tennant Creek town site and indicate a minimum age of 1825–1830 Ma for their formation. These ages are within error of those for the felsic volcanism of the Flynn Subgroup, and a genetic relationship between the two may exist. Samples from gold deposits elsewhere in the area indicate disturbance of the K‐Ar isotope system. The second thermal event to affect the region occurred at around 1700 Ma, and is confirmed by the ⁴⁰Ar‐³⁹Ar muscovite ages for the ‘Warrego’ granite (1677 ± 4 Ma) and for the metamorphism of the Wundirgi Formation (1696 ± 4 Ma).     

Influence of dissolution/reprecipitation reactions on metamorphic greenschist to amphibolite facies mica 40Ar/39Ar ages in the Longmen Shan (eastern Tibet)

Linking ages to metamorphic stages in rocks that have experienced low‐ to medium‐grade metamorphism can be particularly tricky due to the rarity of index minerals and the preservation of mineral or compositional relicts. The timing of metamorphism and the Mesozoic exhumation of the metasedimentary units and crystalline basement that form the internal part of the Longmen Shan (eastern Tibet, Sichuan, China), are, for these reasons, still largely unconstrained, but crucial for understanding the regional tectonic evolution of eastern Tibet. In situ core‐rim ⁴⁰Ar/³⁹Ar biotite and U–Th/Pb allanite data show that amphibolite facies conditions (~10–11 kbar, 530°C to 6–7 kbar, 580°C) were reached at 210–180 Ma and that biotite records crystallization, rather than cooling, ages. These conditions are mainly recorded in the metasedimentary cover. The ⁴⁰Ar/³⁹Ar ages obtained from matrix muscovite that partially re‐equilibrated during the post peak‐P metamorphic history comprise a mixture of ages between that of early prograde muscovite relicts and the timing of late muscovite recrystallization at c. 140–120 Ma. This event marks a previously poorly documented greenschist facies metamorphic overprint. This latest stage is also recorded in the crystalline basement, and defines the timing of the greenschist overprint (7 ± 1 kbar, 370 ± 35°C). Numerical models of Ar diffusion show that the difference between ⁴⁰Ar/³⁹Ar biotite and muscovite ages cannot be explained by a slow and protracted cooling in an open system. The model and petrological results rather suggest that biotite and muscovite experienced different Ar retention and resetting histories. The Ar record in mica of the studied low‐ to medium‐grade rocks seems to be mainly controlled by dissolution–reprecipitation processes rather than by diffusive loss, and by different microstructural positions in the sample. Together, our data show that the metasedimentary cover was thickened and cooled independently from the basement prior to c. 140 Ma (with a relatively fast cooling at 4.5 ± 0.5°C/Ma between 185 and 140 Ma). Since the Lower Cretaceous, the metasedimentary cover and the crystalline basement experienced a coherent history during which both were partially exhumed. The Mesozoic history of the Eastern border of the Tibetan plateau is therefore complex and polyphase, and the basement was actively involved at least since the Early Cretaceous, changing our perspective on the contribution of the Cenozoic geology.     

Using white mica 40Ar/39Ar data as a tracer for fluid flow and permeability under high‐P conditions: Tauern Window,Eastern Alps

New single‐grain‐fusion muscovite and paragonite ⁴⁰Ar/³⁹Ar data from eclogite and blueschist units exposed in the Tauern Window, Eastern Alps yield a range of apparent ages from 90 to 23 Ma. These apparent ages are generally older than expected for ⁴⁰Ar/³⁹Ar cooling ages, given constraints from other geochronological systems such as Rb–Sr and U–Pb. Numerical Ar‐in‐muscovite diffusion models for Tauern Window nappe P–T paths in an open system suggest that ⁴⁰Ar/³⁹Ar ages should lie between 29 and 24 Ma, and that they should constrain cooling and decompression following the post‐high pressure Barrovian overprint. The measured ranges of apparent ⁴⁰Ar/³⁹Ar dates suggest that the assumption of open system behaviour is not valid for this region. The local and/or regional generation of fluid during exhumation promoted pervasive recrystallization of high pressure lithologies throughout the Tauern Window to greenschist and amphibolite facies assemblages. The old apparent ⁴⁰Ar/³⁹Ar white mica dates in all lithologies are therefore interpreted as being due to inefficient removal of grain boundary Ar by the grain boundary fluids during the Barrovian overprint, due to high Ar concentrations or limited connectivity or both. This caused spatially (mm‐scale) and temporally variable fluxes of Ar out of, and probably into, white mica in both metasedimentary and metabasic lithologies.     

The Meso-Cenozoic thermo-tectonic evolution of the Eastern Pyrenees: an <Superscript>40</Superscript>Ar/<Superscript>39</Superscript>Ar fission track and (U–Th)/He thermochronological study of the Canigou and Mont-Louis massifs

Vertical displacements on the SW–NE Têt fault (Eastern Pyrenees Axial Zone, France), which separates the Variscan Canigou-Carança and Mont-Louis massifs, were constrained using a thermochronologic multi-method approach. ⁴⁰Ar/³⁹Ar data from the granitic Mont-Louis massif record its Variscan cooling history and reveal no ages younger than Early Cretaceous, while the Canigou-Carança gneiss massif records systematically younger ⁴⁰Ar/³⁹Ar ages. These younger ⁴⁰Ar/³⁹Ar ages in the Canigou-Carança gneiss massif are the result of partial to total rejuvenation of argon isotopic systems related to a thermal flow coeval with the Cretaceous HT-BP metamorphism in the North Pyrenean Zone. Only the deepest rocks from the Canigou-Carança suffered this extensive Mid-Cretaceous thermal overprint probably due to differential burial around 4 km at that time. The post Mid-Cretaceous vertical displacements along the Têt fault are recorded by “low” temperature thermochronology using K-feldspar ⁴⁰Ar/³⁹Ar, zircon and apatite fission track and (U–Th)/He datings. The Mont-Louis granite samples experienced a long period of protracted cooling reflecting a lack of thermo-tectonic activity in this area from Late Palaeozoic to Early Cenozoic, followed by cooling from 55–60 Ma to Late Eocene at a mean rate of 15–20°C/Ma in the final stage. This cooling stage corresponds to Têt fault reactivation with a reversed component, promoting exhumation of the Mont-Louis roof zone contemporaneously with the south-vergent Pyrenean thrusting. In the Canigou-Carança massif, the main cooling event occurred from 32 to 18 Ma at a maximum rate of 30°C/Ma during Early Oligocene followed by a more moderate rate of 3°C/Ma from Late Oligocene to Early Burdigalian, coeval with the normal reactivation of the Têt fault in brittle conditions that accommodated the final exhumation of the massif during the opening of the Gulf of Lion.     

Crustal response to continental collisions between the Tibet, Indian, South China and North China Blocks: geochronological constraints from the Songpan-Garzê Orogenic Belt, western China

We report SHRIMP U–Th–Pb monazite, conventional U–Pb titanite, Sm–Nd garnet and Rb–Sr muscovite and biotite ages for metamorphic rocks from the Danba Domal Metamorphic Terrane in the eastern Songpan‐Garzê Orogenic Belt (eastern Tibet Plateau). These ages are used to determine the timing of polyphase metamorphic events and the subsequent cooling history. The oldest U–Th–Pb monazite and Sm–Nd garnet ages constrain an early Barrovian metamorphism (M1) in the interval c. 204–190 Ma, coincident with extensive Indosinian granitic magmatism throughout the Songpan‐Garzê Orogenic Belt. A second, higher‐grade sillimanite‐grade metamorphic event (M2), recorded only in the northern part of the Danba terrane, was dated at c. 168–158 Ma by a combination of U–Th–Pb monazite and titanite and Sm–Nd garnet ages. It is suggested that M1 was a thermal event that affected the entire orogenic belt while M2 may represent a local thermal perturbation. Rb–Sr muscovite ages range from c. 138–100 Ma, whereas Rb–Sr biotite ages cluster at c. 34–24 Ma. These ages document regional cooling at rates of c. 2–3 °C Myr^?1 following the M1 peak for most of the terrane. However, those parts of the terrane affected by the higher‐temperature M2 event (e.g. the migmatite zone) experienced initially more rapid (c. 8 °C Myr^?1) cooling after peak M2 before joining the regional slow cooling path defined by the rest of the terrane at c. 138 Ma. Regional slow cooling between c. 138 and c. 30 Ma is thought to be the result of post‐tectonic isostatic uplift after extensive crustal thickening caused by collision of the South and North China Blocks. The clustering of biotite Rb–Sr ages marks the onset of rapid uplift across the entire terrane commencing at c. 30–20 Ma. This cooling history is shared with many other regions of the Tibet Plateau, suggesting that uplift of the Tibet Plateau (including the Songpan‐Garzê Orogenic Belt) occurred predominantly in the last c. 30 Myr as a response to the continuing northwards collision of India with Eurasia.     

Early Paleozoic Magmatism and Gold Mineralization in the Northern Aitun, NW China

Abstract This paper discusses the relationships between granitic magmatism and gold mineralization and the exhumation history of the Dapinggou gold deposit in northern Altun, NW China based on the geochronological data, including zircon U‐Pb ages, Rb‐Sr isochron age and ⁴⁰Ar‐³⁹Ar dating and MDD modeling data. The main granitic magmatism age in this area is attained from the ID TIMS U‐Pb geochronology of zircons from the Kuoshibulak granite, the biggest granite in the northern Altun area, which gives a concordant age of 443±5 Ma in the Late Ordovician. Zircon ID TIMS U‐Pb geochronology of the West Dapinggou biotite granite west of the Dapinggou gold deposit gives concordant ages around 485±10 Ma, representing the early stage of Ordovician magmatism. The Rb‐Sr isochron age (487±21 Ma) of 6 quartz inclusion samples from quartz veins in this gold deposit is very close to that of the West Dapinggou granite. MDD modeling of step heating ⁴⁰Ar‐³⁹Ar data of K‐feldspar from the same West Dapinggou biotite granite gives a rapid cooling history from 300°C to 150°C during 200–185 Ma. According to the age data and the geological setting of this area, we conclude that the Dapinggou gold deposit was formed at the early stage of the Early Paleozoic granitic magmatism in northern Altun, and exhumed in the Early Jurassic due to the normal faulting of the Lapeiquan detachment. The Early Paleozoic magmatism may provide heat source and produce geological fluids, which are very important for gold mineralization. Exhumation in the Mesozoic caused the uplift of the deposit towards the ground surface.     

40Ar/39Ar record of late Pan–African exhumation of a granulite facies terrain, central Dronning Maud Land, East Antarctica

⁴⁰Ar/³⁹Ar geochronological data on hornblende, biotite and K-feldspar provide constraints on the cooling path experienced by a high-grade metamorphic complex from the Mühlig–Hofmannfjella and Filchnerfjella (6–8°E), central Dronning Maud Land, Antarctica, during the late Neoproterozoic-early Palaeozoic Pan–African orogeny. Hornblende ages yield c. 481 Ma, biotite ages range from c. 466 Ma to c. 435 Ma, whereas K-feldspar ages of the gneisses are c. 437 Ma. The ⁴⁰Ar/³⁹Ar data suggest initial cooling at a rate of ~10 °C/Myr between 481 and 465 Ma, followed by a lower cooling rate of ~6 °C/Myr during the subsequent c. 30 million years. The K-feldspar ⁴⁰Ar/³⁹Ar ages place a lower time limit on the duration of the exhumation, by the time of thermal relaxation to a stable continental geotherm. The ⁴⁰Ar/³⁹Ar data reflecting cooling indicate tectonic exhumation related to orogenic collapse during a later phase of the Pan–African orogeny.     

Late Neoproterozoic to Holocene thermal history of the Precambrian Georgetown Inlier,northeast Australia

Carboniferous‐Permian volcanic complexes and isolated patches of Upper Jurassic — Lower Cretaceous sedimentary units provide a means to qualitatively assess the exhumation history of the Georgetown Inlier since ca 350 Ma. However, it is difficult to quantify its exhumation and tectonic history for earlier times. Thermochronological methods provide a means for assessing this problem. Biotite and alkali feldspar ⁴⁰Ar/³⁹Ar and apatite fission track data from the inlier record a protracted and non‐linear cooling history since ca 750 Ma. ⁴⁰Ar/³⁹Ar ages vary from 380 to 735 Ma, apatite fission track ages vary between 132 and 258 Ma and mean track lengths vary between 10.89 and 13.11 μm. These results record up to four periods of localised accelerated cooling within the temperature range of ～320–60°C and up to ～14 km of crustal exhumation in parts of the inlier since the Neoproterozoic, depending on how the geotherm varied with time. Accelerated cooling and exhumation rates (0.19–0.05 km/10⁶ years) are observed to have occurred during the Devonian, late Carboniferous‐Permian and mid‐Cretaceous — Holocene periods. A more poorly defined Neoproterozoic cooling event was possibly a response to the separation of Laurentia and Gondwana. The inlier may also have been reactivated in response to Delamerian‐age orogenesis. The Late Palaeozoic events were associated with tectonic accretion of terranes east of the Proterozoic basement. Post mid‐Cretaceous exhumation may be a far‐field response to extensional tectonism at the southern and eastern margins of the Australian plate. The spatial variation in data from the present‐day erosion surface suggests small‐scale fault‐bounded blocks experienced variable cooling histories. This is attributed to vertical displacement of up to ～2 km on faults, including sections of the Delaney Fault, during Late Palaeozoic and mid‐Cretaceous times.     

U–Pb isotopic constraints on diachronous metamorphism in the northern Monashee complex, southern Canadian Cordillera

U–Pb isotopic data from the northern Monashee complex, one of the deepest structural exposures in the southern Canadian Cordillera, indicate that the age of metamorphism varies according to structural position in a 6 km thick section. This metamorphism resulted in an unusual sequence in which rocks with the lowest-grade mineral assemblage (kyanite–sillimanite–staurolite–muscovite) are underlain and overlain by higher-grade rocks. Xenotime and monazite U–Pb dates vary progressively from 64 Ma in the structurally highest rocks to 49 Ma in the deepest rocks. Discordant U–Pb ages from Proterozoic and Cretaceous monazite and titanite are used to interpret the thermal significance of the early Tertiary dates. The discordant analyses define linear arrays with lower intercepts that broadly overlap with early Tertiary, and the amount of discordance varies with structural level; it is least in the deeper rocks and greatest in higher rocks. Electron microprobe work showed that the monazite discordance in the deeper rocks resulted from Tertiary mineral overgrowth and recrystallization rather than Pb diffusion. We use previous studies of Pb diffusion and the fact that Proterozoic monazite and titanite suffered only negligible to moderate amounts of diffusive Pb loss to contend that elevated temperatures (c. 600–650 °C are inferred from pelitic mineral assemblages) existed in the deeper rocks for a short duration, perhaps a few million years. The downwards younging 64–49 Ma U–Pb dates are interpreted as closely reflecting xenotime and monazite growth ages rather than cooling ages or substantially reset ages based on the lack of Pb diffusion in monazite and the previously obtained ⁴⁰Ar/³⁹Ar data which suggest that rapid cooling occurred immediately after the U–Pb dates. In addition, growth ages are interpreted as thermal peak ages based on U–Pb dates from coeval kyanite-bearing leucosomes, the consistent nature of the U–Pb dates throughout the study area, and petrographic relationships which suggest that monazite grew before or during development of the syn-metamorphic foliation. These interpretations lead us to conclude that metamorphism was diachronous according to structural level, with higher rocks attaining peak temperatures and cooling rapidly while deeper rocks were heating towards a thermal peak that was attained a few million years later. This thermal scenario requires that higher rocks cannot have been the heat source for the deeper metamorphism, as was previously proposed.     

U‐Pb Geochronological and Thermochronological Time–Temperature Constraints of 40Ar/39Ar Hornblende Reference Material HB3gr

Hornblende from the Lone Grove Pluton, Llano Uplift, Texas, has served as an irradiation reference material in ⁴⁰Ar/³⁹Ar studies for decades. In order to evaluate the apparent age bias that currently exists between the U‐Pb and ⁴⁰Ar/³⁹Ar systems, zircon and titanite were dated by isotope dilution‐thermal ionisation mass spectrometry (ID‐TIMS) from the same rock from which the hornblende ⁴⁰Ar/³⁹Ar reference material HB3gr is derived. Zircon U‐Pb data indicate initial crystallisation at 1090.10 ± 0.16 Ma (2s), a date that is 1.7% older than the accepted K‐Ar date (1072 ± 14 Ma, 2s) for HB3gr; an offset that exceeds the typical 0.5–1% bias between the two systems, though remaining within uncertainty due to the large uncertainties in the ⁴⁰K decay constant. Zircon data are presented using both EARTHTIME tracers ET535 and ET2535 and are statistically indistinguishable. Single grain titanite analyses range between 1082 ± 0.75 and 1086 ± 0.81 Ma (2s) and are interpreted to record the subsequent cooling following crystallisation at rates between 30 and 50 °C Ma^?1. This is supported by the observation that hornblende ⁴⁰Ar/³⁹Ar dates corrected for decay constant bias are resolvably younger than the zircon U‐Pb date and in good agreement with titanite U‐Pb dates, permitting the conclusion that both titanite U‐Pb and hornblende ⁴⁰Ar/³⁹Ar systems provide a record of cooling.     

Diachronous Palaeoproterozoic deformation and metamorphism in the Committee Bay belt,Rae Province,Nunavut: insights from 40Ar–39Ar cooling ages and thermal modelling

Regional‐scale ⁴⁰Ar–³⁹Ar data presented in this paper reveal significant across‐strike and along‐strike age differences in the Committee Bay belt (CBb), Rae Province, Nunavut, Canada, that complement variations in observed monazite ages. ⁴⁰Ar–³⁹Ar hornblende ages are c. 1795, 1775, and 1750 Ma in the western, eastern and central parts of the Prince Albert Group (PAG) domain respectively. The migmatite domain and Walker Lake intrusive complex are characterized by c. 1750–1730 ⁴⁰Ar–³⁹Ar hornblende ages without significant along‐strike variation. The ⁴⁰Ar–³⁹Ar data provide important constraints on the cooling history and on thermal modelling that elucidates the controls on diachroneity and metamorphic patterns within the belt. In the western CBb, prograde monazite growth occurred 26 ± 10 Myr earlier in the migmatite domain (1864 ± 9 Ma; peak P–T = 5 kbar?700 °C) than in the PAG domain (1838 ± 5 Ma; peak P–T = 5 kbar?580 °C). Calculations indicate that this earlier monazite growth results from tectonic thickening of higher heat productivity Archean lithologies in the migmatite domain, which undergoes more rapid prograde heating than the less radiogenetic and lower grade rocks of the PAG domain. Granite generation via biotite dehydration melting at 800 °C and 20 km depth is predicted to occur c. 1835 Ma, in agreement with geochronological constraints. The tectonic burial of crustal domains with contrasting radiogenic properties also explains the general congruence of lower to upper amphibolite facies metamorphic zones generated during the two main orogenic cycles (i.e. M₂–D₁ and M₃–D₂). The modelled timing of prograde monazite growth in the migmatite domain suggests that D₂ tectonic thickening began at 1872 ± 9 Ma, some 8 ± 3 Myr before monzazite growth, coeval with the inferred time of collision of the Meta Incognita terrane with the southern Rae Province. Along‐strike diachroneity, reflected in 25 Myr younger monazite and ⁴⁰Ar–³⁹Ar hornblende ages in the eastern relative to the western PAG domain, cannot be accounted for by heat productivity contrasts along the belt. Instead the younger deformation and metamorphism in the eastern CBb was driven by its proximity to the eastern promontory of the Superior Province which collided with the Rae Province at c. 1820 Ma. The ⁴⁰Ar–³⁹Ar data presented here support the interpretation that the youngest monazite in the CBb crystallized at c. 1790 Ma in the central CBb when this part of the belt was downfolded into a gentle synformal structure while the western part of the belt cooled through ⁴⁰Ar–³⁹Ar hornblende closure. The results of this study illustrate the important influence of contrasting rock properties on the thermal evolution of orogenic belts and on the temporal record of this evolution.     

Aspects of the structural and late thermal evolution of the Redbank Thrust system,central Australia: Constraints from the Speares Metamorphics

We present new data on the field geology and late thermal evolution of the Redbank Thrust system in the Arunta Block of central Australia. Geochronological and field data from the Speares Metamorphics are also used to relate the thermal evolution of the Redbank Thrust system to the structural evolution of the region. We show that several stages in the evolution might be discerned. An originally sedimentary sequence was intruded by mafic intrusions and then deformed during partial melting to form the principal foliation observed in the region (D1). This sequence was then folded during D2 into upright folds with north‐ to northeast‐plunging fold axes. These events are likely to correlate with the Strangways and/or Argilke and Chewings Orogenies known from previous studies. Subsequently, the Redbank Thrust was initiated during D3. This event is recognised by deflection of the host rocks into the shear zone and might therefore have been associated with a component of strike‐slip motion. It occurred probably at or before 1500–1400 Ma. Subsequent north‐over‐south thrust motion in the Redbank Thrust formed the intense mylonitic fabric and folded the mylonitic fabric during D4 into asymmetric folds with shallow fold axes. New ⁴⁰Ar/³⁹Ar K‐feldspar ages from three samples collected from variably deformed branches of the Redbank Thrust and undeformed rocks in the Speares Metamorphics suggest that most parts of the Redbank Thrust system cooled relatively slowly after metamorphism and deformation in the Mesoproterozoic so that the D4 thrusting might have been very long‐lived. Minimum ages of the K‐feldspar age spectra show that the entire region cooled below 200°C by approximately 300 Ma. Apatite fission track ages from nine samples show that cooling through the apatite partial annealing zone occurred during Cretaceous time (ca 150–70 Ma) and modelled cooling histories are consistent with the cooling rates obtained from the K‐feldspar data. They indicate that final exhumation of the Redbank Thrust system occurred probably in response to erosion, possibly driven by rifting around the margins of Australia.     

When will it end? Long-lived intracontinental reactivation in central Australia

The post-Mesoproterozoic tectonometamorphic history of the Musgrave Province, central Australia, has previously been solely attributed to intracontinental compressional deformation during the 580 -520 Ma Petermann Orogeny. However, our new structurally controlled multi-mineral geochronology results,from two north-trending transects, indicate protracted reactivation of the Australian continental interior over ca. 715 million years. The earliest events are identified in the hinterland of the orogen along the western transect. The first tectonothermal event, at ca. 715 Ma, is indicated by40 Ar/39 Ar muscovite and U e Pb titanite ages. Another previously unrecognised tectonometamorphic event is dated at ca. 630 Ma by Ue Pb analyses of metamorphic zircon rims. This event was followed by continuous cooling and exhumation of the hinterland and core of the orogen along numerous faults, including the Woodroffe Thrust,from ca. 625 Ma to 565 Ma as indicated by muscovite, biotite, and hornblende40 Ar/39 Ar cooling ages. We therefore propose that the Petermann Orogeny commenced as early as ca. 630 Ma. Along the eastern transect,40 Ar/39 Ar muscovite and zircon(Ue Th)/He data indicate exhumation of the foreland fold and thrust system to shallow crustal levels between ca. 550 Ma and 520 Ma, while the core of the orogen was undergoing exhumation to mid-crustal levels and cooling below 600-660℃. Subsequent cooling to 150 -220℃ of the core of the orogen occurred between ca. 480 Ma and 400 Ma(zircon [Ue Th]/He data)during reactivation of the Woodroffe Thrust, coincident with the 450 -300 Ma Alice Springs Orogeny.Exhumation of the footwall of the Woodroffe Thrust to shallow depths occurred at ca. 200 Ma. More recent tectonic activity is also evident as on the 21 May, 2016(Sydney date), a magnitude 6.1 earthquake occurred, and the resolved focal mechanism indicates that compressive stress and exhumation along the Woodroffe Thrust is continuing to the present day. Overall, these results demonstrate repeated amagmatic reactivation of the continental interior of Australia for ca. 715 million years, including at least 600 million years of reactivation along the Woodroffe Thrust alone. Estimated cooling rates agree with previously reported rates and suggest slow cooling of 0.9 -7.0℃/Ma in the core of the Petermann Orogen between ca. 570 Ma and 400 Ma. The long-lived, amagmatic, intracontinental reactivation of central Australia is a remarkable example of stress transmission, strain localization and cratonization-hindering processes that highlights the complexity of Continental Tectonics with regards to the rigid-plate paradigm of Plate Tectonics.     

A comparative U–Th–Pb (zircon–monazite) and 40Ar–39Ar (muscovite–biotite) study of shear zones in northern Victoria Land (Antarctica): implications for geochronology and localized reworking of the Ross Orogen

Mylonitic granites from two shear zones in northern Victoria Land (Antarctica) were investigated in order to examine the behaviour of the U–Th–Pb system in zircon and monazite and of the ⁴⁰Ar–³⁹Ar system in micas during ductile deformation. Meso‐ and micro‐structural data indicate that shear zones gently dip to the NE and SW, have an opposite sense of shear (top‐to‐the‐SW and ‐NE, respectively) and developed under upper greenschist facies conditions. In situ U–Pb dating by laser‐ablation inductively coupled plasma‐mass spectrometry of zircon areas with well‐preserved igneous zoning patterns (c. 490 Ma) confirm that granites were emplaced during the Early Cambrian to Early Ordovician Ross–Delamerian Orogeny. Monazite from the Bier Point Shear Zone (BPSZ) mainly yielded U–Th–Pb ages of c. 440 Ma, in agreement with in‐situ Ar laserprobe ages of syn‐shear muscovite and with most Ar ages of coexisting biotite. The agreement of ages derived from different decay schemes and from minerals with different crystal‐chemical features suggests that isotope transport in the studied sample was mainly controlled by (re)crystallization processes and that the main episode of ductile deformation in the BPSZ occurred at c. 440 Ma. Cathodoluminscence imaging showed that zircon from the BPSZ contains decomposed areas with faint relics of oscillatory zoning. These areas yielded a U–Pb age pattern which mimics that of monazite but is slightly shifted towards older ages, supporting previous studies which suggest that ‘ghost’ structures may be affected by inheritance. In contrast, secondary structures in zircon from the Mt. Emison Shear Zone (MESZ) predominantly consist of overgrowths or totally recrystallized areas and gave U–Pb ages of c. 450 and 410 Ma. The c. 450‐Ma date matches within errors most monazite U–Th–Pb ages and in‐situ Ar ages on biotite aligned along the mylonitic foliation. This again suggests that isotope ages from the different minerals are (re)crystallization ages and constrains the time of shearing in the MESZ to the Late Ordovician. Regionally, results indicate that shear zones were active in the Late Ordovician–Early Silurian and that their development was partially synchronous at c. 440 Ma, suggesting that they belong to a shear‐zone system formed in response to ～NE–SW‐directed shortening. Taking into account the former juxtaposition of northern Victoria Land and SE Australia, we propose that shear zones represent reactivated zones formed in response to stress applied along the new plate margin as a consequence of contractional tectonics associated with the early stages (Benambran Orogeny) of the development of the Late Ordovician–Late Devonian Lachlan Fold Belt.